Recent developments in superhydrophobic graphene and graphene-related materials: from preparation to potential applications

Superhydrophobic Non-Metallic Surfaces with Multiscale Nano/Micro-Structure: Fabrication and Application

Multiscale nano/micro-structured surfaces with superhydrophobicity are abundantly observed in nature such as lotus leaves, rose petals and butterfly wings, where microstructures typically reinforce mechanical stability, while nanostructures predominantly govern wettability. To emulate such hierarchical structures in nature, various methods have been widely applied in the past few decades to the manufacture of multiscale structures which can be applied to functionalities ranging from anti-icing and water-oil separation to self-cleaning. In this review, we highlight recent advances in nano/micro-structured superhydrophobic surfaces, with particular focus on non-metallic materials as they are widely used in daily life due to their lightweight, abrasion resistance and ease of processing properties. This review is organized into three sections. First, fabrication methods of multiscale hierarchical structures are introduced with their strengths and weaknesses. Second, four main application areas of anti-icing, water-oil separation, anti-fog and self-cleaning are overviewed by assessing how and why multiscale structures need to be incorporated to carry out their performances. Finally, future directions and challenges for nano/micro-structured surfaces are presented.

Laser-reduced graphene oxide for a flexible liquid sliding sensing surface

Flexible electronic skin is a flexible sensor system that imitates human skin. Recently, flexible sensors have been successfully developed. However, the droplet sliding sensing technology on a flexible electronic skin surface is still challenging. In this Letter, a flexible droplet sliding sensing surface is proposed and fabricated by laser-reduced graphene oxide (LRGO). The LRGO shows porous structures and low surface energy, which are beneficial for infusing lubricants and fabricating stable slippery surfaces. The slippery surface guarantees free sliding of droplets. The droplet sliding sensing mechanism is a combination of triboelectricity and electrostatic induction. After a NaCl droplet slides from lubricant-infused LRGO, a potential difference (∼0.2 mV) can be measured between two Ag electrodes. This study reveals considerable potential applications in intelligent robots and the medical field.

Smart Film Actuators for Biomedical Applications

Taking inspiration from the extremely flexible motion abilities in natural organisms, soft actuators have emerged in the past few decades. Particularly, smart film actuators (SFAs) demonstrate unique superiority in easy fabrication, tailorable geometric configurations, and programmable 3D deformations. Thus, they are promising in many biomedical applications, such as soft robotics, tissue engineering, delivery system, and organ-on-a-chip. In this review, the latest achievements of SFAs applied in biomedical fields are summarized. The authors start by introducing the fabrication techniques of SFAs, then shift to the topology design of SFAs, followed by their material selections and distinct actuating mechanisms. After that, their biomedical applications are categorized in practical aspects. The challenges and prospects of this field are finally discussed. The authors believe that this review can boost the development of soft robotics, biomimetics, and human healthcare.

Polystyrene Macroporous Magnetic Nanocomposites Synthesized through Deep Eutectic Solvent-in-Oil High Internal Phase Emulsions and Fe3O4 Nanoparticles for Oil Sorption

In this work, we report a nonaqueous one-step method to synthesize polystyrene macroporous magnetic nanocomposites through high internal phase emulsions (HIPEs) formulated with the deep eutectic solvent (DES) composed of urea:choline chloride (U:ChCl, in a 2:1 molar ratio) as the internal phase and co-stabilized with mixtures of Span 60 surfactant and non-functionalized magnetite nanoparticles (Fe₃O₄ NPs). The porous structure and the magnetic and lipophilic properties of the nanocomposite materials were easily tailored by varying the amount of Fe₃O₄ NPs (0, 2, 5 and 10 wt %) and the surfactant Span 60 (0, 5, 10, and 20 wt %) used in the precursor emulsion. The resultant nanocomposite polyHIPEs exhibit high sorption capacity toward different oils (hexane, gasoline, and vegetable oil) due to their high porosity, interconnectivity, and hydrophobic surface. It was observed that the oil sorption capacity was improved when the amount of surfactant decreased and Fe₃O₄ NPs increased in HIPE formulation. Therefore, polyHIPE formulated with 5 and 10 wt % Span 60 and Fe₃O₄ NPs, respectively, showed the highest oil sorption capacities of 4.151, 3.556, and 3.266 g g^-1 for gasoline, hexane, and vegetable oil, respectively. In addition, the magnetic monoliths were reused for more than ten sorption/desorption cycles without losing their oil sorption capacity.

Superhydrophobic nanohybrid sponges for separation of oil/ water mixtures

The industrial revolution has led to different types of environmental pollution, including frequent leakage of crude oil to marine waters and the contamination of wastewater with immiscible or emulsified oils and organic liquids from various industrial residues. Hence, developing multifunctional materials for oil/water separation is a field of high significance for the remediation of oil-polluted water. Recently, advanced superwetting materials have been employed for oily wastewater treatment. This review summarizes the recent development in fabricating superhydrophobic/superoleophilic nanohybrid polyurethane, melamine, and cellulose sponges for oil/water separation. The use of organic and/or inorganic nanohybrid materials opens the horizon for designing a diverse and wide range of superhydrophobic sponges due to the synergistic effect between the surface roughness and chemical composition. The discussion is organized based on different classes of low surface energy materials including thermoplastics, thermosets, elastomers, fluorinated polymers, conductive polymers, organosilanes, long alkyl chain compounds, and hydrophobic carbon-based materials. Recent examples for the separation of both immiscible and emulsified oil/water mixtures are presented, with a focus on fabrication strategies, separation efficiency, recyclability, mechanical performance, and durability. Currently, most studies did not focus on the mechanical/chemical stability of the fabricated sponges, and hence, future research directions shall address the fabrication of robust and long-term durable superhydrophobic sponges with proper guidelines. Similarly, more research focus is required to design superhydrophobic sponges for the separation of emulsified oil/water mixtures and heavy crude oil samples. Superhydrophobic sponges can be employed for treatment of oily wastewater, emulsion separation, and cleanup of crude oil spills.

Emerging Separation Applications of Surface Superwettability

Human beings are facing severe global environmental problems and sustainable development problems. Effective separation technology plays an essential role in solving these challenges. In the past decades, superwettability (e.g., superhydrophobicity and underwater superoleophobicity) has succeeded in achieving oil/water separation. The mixture of oil and water is just the tip of the iceberg of the mixtures that need to be separated, so the wettability-based separation strategy should be extended to treat other kinds of liquid/liquid or liquid/gas mixtures. This review aims at generalizing the approach of the well-developed oil/water separation to separate various multiphase mixtures based on the surface superwettability. Superhydrophobic and even superoleophobic surface microstructures have liquid-repellent properties, making different liquids keep away from them. Inspired by the process of oil/water separation, liquid polymers can be separated from water by using underwater superpolymphobic materials. Meanwhile, the underwater superaerophobic and superaerophilic porous materials are successfully used to collect or remove gas bubbles in a liquid, thus achieving liquid/gas separation. We believe that the diversified wettability-based separation methods can be potentially applied in industrial manufacture, energy use, environmental protection, agricultural production, and so on.

Performance of Graphene/Polydimethylsiloxane Surfaces against S. aureus and P. aeruginosa Single- and Dual-Species Biofilms

The increasing incidence of implant-associated infections has prompted the development of effective strategies to prevent biofilm formation on these devices. In this work, pristine graphene nanoplatelet/polydimethylsiloxane (GNP/PDMS) surfaces containing different GNP loadings (1, 2, 3, 4, and 5 wt%) were produced and evaluated on their ability to mitigate biofilm development. After GNP loading optimization, the most promising surface was tested against single- and dual-species biofilms of Staphylococcus aureus and Pseudomonas aeruginosa. The antibiofilm activity of GNP/PDMS surfaces was determined by the quantification of total, viable, culturable, and viable but nonculturable (VBNC) cells, as well as by confocal laser scanning microscopy (CLSM). Results showed that 5 wt% GNP loading reduced the number of total (57%), viable (69%), culturable (55%), and VBNC cells (85%) of S. aureus biofilms compared to PDMS. A decrease of 25% in total cells and about 52% in viable, culturable, and VBNC cells was observed for P. aeruginosa biofilms. Dual-species biofilms demonstrated higher resistance to the antimicrobial activity of GNP surfaces, with lower biofilm cell reductions (of up to 29% when compared to single-species biofilms). Still, the effectiveness of these surfaces in suppressing single- and dual-species biofilm formation was confirmed by CLSM analysis, where a decrease in biofilm biovolume (83% for S. aureus biofilms and 42% for P. aeruginosa and dual-species biofilms) and thickness (on average 72%) was obtained. Overall, these results showed that pristine GNPs dispersed into the PDMS matrix were able to inhibit biofilm growth, being a starting point for the fabrication of novel surface coatings based on functionalized GNP/PDMS composites.

Superhydrophobic Ni-Reduced Graphene Oxide Hybrid Coatings with Quasi-Periodic Spike Structures

Recently, sophisticated technologies are applied to design a certain surface nature that can have superhydrophobic properties. Thus, a simple spray technique was introduced to prepare a superhydrophobic surface using rGO with Ni-S system (rGO-Ni) by using NiSO4 catalyst under microwave irradiation at various reaction times of 5, 10, 20, and 30 min. The GO reduction was conducted at a fixed Ar/H2 ratio, a flow rate of 0.4 L/min, microwave power of 720 W, and a mass of 0.5 g. GO powder with nickel sulfate catalyst was treated under Ar/H2 (4:1) mixture for GO reduction, where Ar and H2 were expected to prevent the rebinding of oxygen released from GO. The result of XRD and Raman measurement confirms that rGO-Ni prepared at reaction time 20 min exhibit the highest reduction of GO and the presence of various Ni-S crystal structures such as NiS, NiS2, Ni3S2, and Ni3S4 due to decomposition of NiSO4. The rGO-Ni coating performance shows superhydrophobic nature with a contact angle of 150.1°. The AFM images show that the addition of nickel to rGO produces a quasi-periodic spike structure, which increases the superhydrophobicity of the r-GO-Ni coated glass with a contact angle of 152.6°. It is emphasized that the proposed simple spray coating using rGO-Ni provides a more favorable option for industry application in obtaining superhydrophobic surfaces.

Hydrophobic and antifouling modification of graphene oxide with functionalized polynorbornene by surface-initiated ring-opening metathesis polymerization

Surface-initiated ring-opening metathesis polymerization (SI-ROMP), based on the design of hydrophobic and antifouling monomers, was employed for the synthesis of grafting-modified graphene oxide (GO).

ADVANCES IN TECHNIQUES AND APPLICATIONS OF RUBBER SURFACE GRAFTING MODIFICATION

To meet the requirement in the application of medical devices, composites, biomaterials, corrosion resistance, and selective adsorptions, rubber surface modification is usually indispensable. Grafting treatment is one of most significate treatment methods. In this paper, we focus on rubber surface grafting modification, including grafting techniques and applications. Different grafting methods—including monomer grafting polymerization and coupling reaction—are covered and compared briefly. The related applications of surface grafting modification techniques, such as improving compatibility of waste rubber as fillers, hydrophobicity and lipophilicity of sponge rubber for oil–water separation, biocompatibility of rubber in the medical field, and forming surface patterns, are demonstrated in detail. The new research directions of surface grafting techniques as well as main challenges in application are also discussed.

Light Management With Grating Structures in Optoelectronic Devices

Ordered and patterned micro/nanostructure arrays have emerged as powerful platforms for optoelectronic devices due to their unique ordered-dependent optical properties. Among various structures, grating structure is widely applied because of its simple fabrication process, easy adjusting of size and morph, and efficient light trapping. Herein, we summarized recent developments of light management with grating structures in optoelectronic devices. Typical mechanisms about the grating structures in optoelectronic devices have been reviewed. Moreover, the applications of grating structures in various optoelectronic devices have been presented. Meanwhile, the remaining bottlenecks and perspectives for future development have been discussed.

Water/gas separation based on the selective bubble-passage effect of underwater superaerophobic and superaerophilic meshes processed by a femtosecond laser

To solve the problems caused by tiny bubbles in liquids and the difficulties involved in collecting useful gas underwater, this paper proposes a method to separate bubbles from water by integrating underwater superaerophobic and superaerophilic porous membranes, including bubble removal and collection methods. Inspired by fish scales and lotus leaves, underwater superaerophobic microstructures and underwater superaerophilic microstructures are prepared on a stainless steel (SS) mesh by femtosecond laser processing, respectively. The as-prepared underwater superaerophobic mesh has an anti-bubble ability, while the underwater superaerophilic mesh has a bubble-absorption ability in water. Based on the different dynamic behavior of bubbles on these two kinds of superwetting meshes, efficient water/bubble separation is achieved by using laser-induced superwetting meshes. Tiny bubbles can be completely removed from the water flow in a pipe or easily collected. Such water/gas separation methods based on underwater superaerophobic and superaerophilic porous membranes provide an effective way to prevent the damage caused by bubbles and to collect the available gas in liquids, which has great potential applications in energy utilization, environmental protection, medical and health care, microfluidic chips, chemical manufacturing, agricultural breeding, and so on.

Superhydrophobic Nanocoatings as Intervention against Biofilm-Associated Bacterial Infections

Biofilm formation represents a significant cause of concern as it has been associated with increased morbidity and mortality, thereby imposing a huge burden on public healthcare system throughout the world. As biofilms are usually resistant to various conventional antimicrobial interventions, they may result in severe and persistent infections, which necessitates the development of novel therapeutic strategies to combat biofilm-based infections. Physicochemical modification of the biomaterials utilized in medical devices to mitigate initial microbial attachment has been proposed as a promising strategy in combating polymicrobial infections, as the adhesion of microorganisms is typically the first step for the formation of biofilms. For instance, superhydrophobic surfaces have been shown to possess substantial anti-biofilm properties attributed to the presence of nanostructures. In this article, we provide an insight into the mechanisms underlying biofilm formation and their composition, as well as the applications of nanomaterials as superhydrophobic nanocoatings for the development of novel anti-biofilm therapies.

Multifunctional superhydrophobic adsorbents by mixed-dimensional particles assembly for polymorphic and highly efficient oil-water separation

Supra-wetting materials, especially superhydrophobic absorption materials, as an emerging advanced oil-water separation material have attracted extensive concern in the treatment of oil spillage and industrial oily wastewater. However, it is still a challenge to fabricate robust and multifunctional superhydrophobic materials for the multitasking oil-water separation and fast clean-up of the viscous crude oil by an environment-friendly and scalable method. Herein, a solid-solid phase ball-milling strategy without chemical reagent-free modification was proposed to construct heterogeneous superhydrophobic composites by using waste soot as the solid-phase superhydrophobic modifier. A series of covalent bond restricted soot-graphene (S-GN) or soot-Fe₃O₄ (S-Fe₃O₄) composite materials with a peculiar micro-nano structure are prepared. Through "glue+superhydrophobic particles" method, the prepared soot-based composite particles are facilely loaded on the porous skeleton of the sponge to obtain multifunctional superhydrophobic adsorbents. The reported superhydrophobic adsorbents exhibited robust chemical and mechanical stability, convenient magnetic collection, the high oil absorption capacity of 60-142 g g^-1, durable recyclability (>250 cycles), efficient separation efficiency (>99.5%) and outstanding self-heated performance, which enable them to be competent for oil-water separation in multitasking and complex environment (floating oils, continuous oil collection, oil-in-water emulsion, and viscous oil-spills).

Antiscaling 3D printed feed spacers via facile nanoparticle coating for membrane distillation

Surface modification of feed spacers rather than membranes may hold more merit as an antiscaling strategy in membrane distillation (MD), as it avoids compromising the functionality of MD membrane. In this work, an antiscaling polyamide 3D printed spacer was developed for MD. The surface of the printed spacer was coated with fluorinated silica (FS) nanoparticles synthesized via a sol-gel process. The sol-gel approach used to synthesize the FS nanoparticles is considered a convenient and easy approach for engineering the spacer's surface structure and roughness. The performance of the FS coated printed surface was evaluated against other coating materials of different chemical properties. The coated surfaces were characterized using water contact angle measurements, ATR-FTIR, Raman, FESEM-EDX, atomic force and 3D microscopes. The 3D printed surface's microscale roughness and hydrophobicity increased, while its surface-free energy decreased with FS nanoparticles coating. The antiscaling performance of uncoated and FS coated spacers was then assessed in a direct contact MD process, using a scale-inducing aqueous solution of calcium sulfate as its feed. The scalant (Ca²⁺) attachment on the FS coated spacer was 0.24 mg cm^-2, 74% lower than on the uncoated 3D spacer (0.95 mg cm^-2). Also, by using the antiscaling FS coated spacer, scaling on the membrane surface dropped by 60%. The predominant factors that helped minimize scaling with FS coating were microscale roughness-induced hydrophobicity and reduced surface-free energy that weakened the scalant 's interaction with the spacer surface.

2D and 3D Bulk Materials for Environmental Remediation: Air Filtration and Oil/Water Separation

Air and water pollution pose an enormous threat to human health and ecosystems. In particular, particulate matter (PM) and oily wastewater can cause serious environmental and health concerns. Thus, controlling PM and oily wastewater has been a great challenge. Various techniques have been reported to effectively remove PM particles and purify oily wastewater. In this article, we provide a review of the recent advancements in air filtration and oil/water separation using two- and three-dimensional (2D and 3D) bulk materials. Our review covers the advantages, characteristics, limitations, and challenges of air filters and oil/water separators using 2D and 3D bulk materials. In each section, we present representative works in detail and describe the concepts, backgrounds, employed materials, fabrication methods, and characteristics of 2D and 3D bulk material-based air filters and oil/water separators. Finally, the challenges, technical problems, and future research directions are briefly discussed for each section.

Superhydrophobic graphene-based materials with self-cleaning and anticorrosion performance: An appraisal of neoteric advancement and future perspectives

Lotus like materials having superhydrophobicity is attaining greater demand due to the possibility of molding them into different high end applications. The major issue related to self-cleaning superhydrophobic surfaces is their restricted mechanical properties. The development of nanotechnology has brought many advantages in the fabrication and properties of superhydrophobic surfaces and thus it enhanced the demand of superhydrophobic surfaces. Many scientific groups have studied and reported about the superhydrophobicity exhibited by graphene and its analogous derivatives. The fabrication of the devices having properties ranging from anti-sticking and self-cleaning to anti-corrosion and low friction is made possible by the incorporation of this wonderful two-dimensional material. This review focuses on the preparation and properties of graphene based superhydrophobic coating materials with special mention to the wide range of applications rendered by them.

Facing the Challenge of Poly- and Perfluoroalkyl Substances in Water: Is Electrochemical Oxidation the Answer?

Electrochemical treatment systems have the unique ability to completely mineralize poly- and perfluoroalkyl substances (PFASs) through potential-driven electron transfer reactions. In this review, we discuss the state-of-the-art on electrooxidation of PFASs in water, aiming at elucidating the impact of different operational and design parameters, as well as reported mechanisms of PFAS degradation at the anode surface. We have identified several shortcomings of the existing studies that are largely limited to small-scale laboratory batch systems and unrealistic synthetic solutions, which makes extrapolation of the obtained data to real-world applications difficult. PFASs are surfactant molecules, which display significant concentration-dependence on adsorption, electrosorption, and dissociation. Electrooxidation experiments conducted with high initial PFAS concentration and/or in high conductivity supporting electrolytes likely overestimate process performance. In addition, the formation of organohalogen byproducts, chlorate and perchlorate, was seldom considered. Nevertheless, the first step toward advancing from laboratory-scale to industrial-scale applications is recognizing both the strengths and limitations of electrochemical water treatment systems. More comprehensive and rigorous evaluation of novel electrode materials, application of scalable proof-of-concept studies, and acknowledgment of all treatment outputs (not just the positive ones) are imperative. The presence of PFASs in drinking water and in the environment is an urgent global public health issue. Developments made in material science and application of novel three-dimensional, porous electrode materials and nanostructured coatings are forging a path toward more sustainable water treatment technologies and potential chemical-free treatment of PFAS-contaminated water.

Relationship and Interconversion Between Superhydrophilicity, Underwater Superoleophilicity, Underwater Superaerophilicity, Superhydrophobicity, Underwater Superoleophobicity, and Underwater Superaerophobicity: A Mini-Review

Superwetting surfaces have received increasing attention because of their rich practical applications. Although various superwettabilities are independently achieved, the relationship between those superwettabilities is still not well-clarified. In this mini-review, we show that superhydrophilicity, underwater superoleophilicity, underwater superaerophilicity, superhydrophobicity, underwater superoleophobicity, and underwater superaerophobicity can be obtained on a same structured surface by the combination of hierarchical surface microstructures and proper chemistry. The relationship and interconversion between the above-mentioned different superwettabilities are also well-discussed. We believe that the current discussion and clarification of the relationship and interconversion between different superwettabilities has important significance in the design, fabrication, and applications of various superwetting materials.

Bioinspired Surfaces With Switchable Wettability

The surface wettability of plants exhibits many unique advantages, which enhances the environmental adaptability of plants. In view of the rapid development of responsive materials, smart surfaces have been explored extensively to regulate surface wettability through external stimuli. Herein, we summarized recent advancements in bioinspired surfaces with switchable wettability. Typical bioinspired surfaces with switchable wettability and their emerging applications have been reviewed. In the end, we have discussed the remaining challenges and provided perspective on future development.

Surface chemistry of graphene and graphene oxide: A versatile route for their dispersion and tribological applications

Graphene, the most promising material of the decade, has attracted immense interest in a diversified range of applications. The weak van der Waals interaction between adjacent atomic-thick lamellae, excellent mechanical strength, remarkable thermal conductivity, and high surface area, make graphene a potential candidate for tribological applications. However, the use of graphene as an additive to liquid lubricants has been a major challenge because of poor dispersibility. Herein, a thorough review is presented on preparation, structural models, chemical functionalization, and dispersibility of graphene, graphene oxide, chemically-functionalized graphene, and graphene-derived nanocomposites. The graphene-based materials as additives to water and lubricating oils improved the lubrication properties by reducing the friction, protecting the contact interfaces against the wear, dissipating the heat from tribo-interfaces, and mitigating the corrosion by forming the protecting thin film. The dispersion stability, structural features, and dosage of graphene-based dispersoids, along with contact geometry, play important roles and govern the tribological properties. The chemistry of lubricated surfaces is critically reviewed by emphasizing the graphene-based thin film formation under the tribo-stress, which minimizes the wear. The comprehensive review provides variable approaches for the development of high-performance lubricant systems and accentuates the lubrication mechanisms by highlighting the role of graphene-based materials for enhancement of tribological properties.

Tunable Wettability of Graphene through Nondestructive Hydrogenation and Wettability-Based Patterning for Bioapplications

The wettability of graphene has been extensively studied and successfully modified by chemical functionalization. Nevertheless, the unavoidable introduction of undesired defects and the absence of systematic and local control over wettability by previous methods have limited the use of graphene in applications. In addition, microscale patterning, according to wettability, has not been attempted. Here, we demonstrate that the wettability of graphene can be systematically controlled and surface patterned into microscale sections based on wettability without creating significant defects, possible by nondestructive hydrogen plasma. Hydrophobic graphene is progressively converted to hydrophilic hydrogenated graphene (H-Gr) that reaches superhydrophilicity. The great contrast in wettability between graphene and H-Gr makes it possible to selectively position and isolate human breast cancer cells on arrays of micropatterns since strong hydrophilicity facilitates the adsorption of the cells. We believe that our method will provide an essential technique for enabling surface and biological applications requiring microscale patterns with different wettability.

Laser Fabrication of Bioinspired Graphene Surfaces With Superwettability

The past decades have seen growing research interest in developing efficient fabrication techniques for preparing bioinspired graphene surfaces with superwettability. Among the various fabrication methods, laser fabrication stands out as a prominent one to achieve this end and has demonstrated unique merits in the development of graphene surfaces with superwettability. In this paper, we reviewed the recent advances in this field. The unique advantages of laser fabricated graphene surfaces have been summarized. Typical graphene surfaces with superwettability achieved by laser fabrication, including superhydrophobic graphene surfaces, oil/ water separation, fog collection, antibacterial surfaces, surface enhanced Raman scattering (SERS), and desalination, have been introduced. In addition, current challenges and future perspectives in this field have been discussed. With the rapid progress of novel laser physical/ chemical fabrication schemes, graphene surfaces with superwettability prepared by laser fabrication may undergo sustained development and thus contribute greatly to the scientific research and our daily life.

Simple and Low-Cost Oil/Water Separation Based on the Underwater Superoleophobicity of the Existing Materials in Our Life or Nature

The achievement of high-efficiency oil/water separation has huge implications for protecting environment and reducing economic losses, but there is still a great challenge. Currently, most artificial oil/water separating materials are fabricated through complex preparation process, resulting in the very high cost of separation. In this paper, we present a simple and low-cost method to achieve oil/water separation by using the underwater superoleophobic materials that already exist in our life or nature. Taking filter paper and zeolite layer as examples, we show the inherent porous microstructures of these materials. Such porous microstructures endow filter paper and zeolite layer with strong ability to absorb water and the underwater superoleophobicity. Based on the porous feature and underwater superoleophobicity, the pre-wetted filter paper and zeolite layer can be used to effectively separate the mixture of water and oil, with great separation capacity. The existing materials (e.g., filter paper and zeolite layer) with both porous microstructure and underwater superoleophobicity in our life or nature are green and low-cost, and can be easily obtained. Such advantages allow those materials to potentially solve the pollution problems caused by the discharge of industrial oily wastewater and the oil-spill accidents.

3D network super-hydrophobic hexafluorbisphenol A poly(aryl ether ketone) membrane prepared by one-step electrospraying

Novel super-hydrophobic poly(aryl ether ketone) (PAEK) membranes have been firstly prepared by modifying ordinary PAEK into hexafluorbisphenol A-PAEK through traditional nucleophilic condensation polymerization and subsequently simple electrospraying technique. With the solution concentration increased, the micromorphology exhibited nanofibers, nanofiber with spindles, 3D network with microspheres embedded, microspheres and dense films, successively. The static water contact angle increased from 99° to 155°, while the sliding angle from 1.3° to 6.8° (±1°), in which the 3D network presented the strongest super-hydrophobicity. After 200 h of water flushing, the rough surface structure and super-hydrophobicity of the membranes were well retained. Moreover, the membrane exhibited wonderful self-cleaning property, oil/water separation property, and stability due to the hierarchical micro/nanostructures. This work provides a new route for the creation of super-hydrophobic high performance engineering plastic fabrics with the potential values in large-scale application of filtration, oil/water separation, and antifouling.

Waterproof lithium metal anode enabled by cross-linking encapsulation

Lithium (Li) metal is considered as the ultimate anode choice for developing next-generation high-energy batteries. However, the poor tolerance against moist air and the unstable solid electrolyte interphases (SEI) induced by the intrinsic high reactivity of lithium bring series of obstacles such as the rigorous operating condition, the poor electrochemical performance, and safety anxiety of the cell, which to a large extent hinder the commercial utilization of Li metal anode. Here, an effective encapsulation strategy was reported via a facile drop-casting and a following heat-assisted cross-linking process. Benefiting from the inherent hydrophobicity and the compact micro-structure of the cross-linked poly(vinylidene-co-hexafluoropropylene) (PVDF-HFP), the as-encapsulated Li metal exhibited prominent stability toward moisture, as well corroborated by the evaluations both under the humid air at 25 °C with 30% relative humidity (RH) and pure water. Moreover, the encapsulated Li metal anode exhibits a decent electrochemical performance without substantially increasing the cell polarization due to the uniform and unblocked ion channels, which originally comes from the superior affinity of the PVDF-HFP polymer toward non-aqueous electrolyte. This work demonstrates a novel and valid encapsulation strategy for humidity-sensitive alkali metal electrodes, aiming to pave the way for the large-scale and low-cost deployment of the alkali metal-based high-energy-density batteries.

Super-Amphiphobic Coating System Incorporating Functionalized Nano-Al2O3 in Polyvinylidene Fluoride (PVDF) with Enhanced Corrosion Resistance

Understanding the corrosion inhibition behavior of super-amphiphobic coating is important to ensure practicability in the real application. 2 layers system of super-amphiphobic coating was successfully developed using functionalized nano-Al2O3 incorporated in polyvinylidene fluoride (PVDF). This study investigates the effect of different amount of functionalizing agent on the coating’s repellency and its relationship toward the corrosion inhibition behavior. We found that a higher amount of fluoroalkylsilane (FAS) led to a decreased in repellency of both water and oil. Electrochemical impedance spectroscopy (EIS) analysis suggests that the synergetic effect between super-hydrophobicity, longer diffusion path, and barrier effect; enhanced the corrosion resistance. Although the coatings demonstrate similar behavior, the most superhydrophobic/amphiphobic coating C1 offers the highest corrosion protection.

Facile optimization of hierarchical topography and chemistry on magnetically active graphene oxide nanosheets

Highly flexible and two-dimensional (2D) graphene oxide (GO) nanosheets have remained instrumental for developing different functional materials for practically relevant applications. In general, 2D GO is routinely assembled into different structures (i.e. layered, porous, etc.) for achieving desired properties. However, a facile approach for modifying GO nanosheets with (1) hierarchical topography and (2) desired chemistry is rare in the literature. In this report, adequate optimization of both hierarchical topography and low surface energy chemistry in a confined space (in the order of μm dimensions) of GO nanosheets is unprecedentedly carried out for achieving magnetically active and 2D 'confined-super-water-repellence'. A chemically reactive polymeric complex was covalently deposited on the GO-nanosheets through a facile 1,4-conjugate addition reaction for adopting a chemically reactive and hierarchically featured polymeric interface. Simultaneously, the deposition of iron oxide nanoparticles on the 2D-nanosheets rendered the entire material magnetically active. The post-covalent modification of these chemically/magnetically active and hierarchically featured GO-nanosheets with octadecylamine (ODA) yielded magnetically active and 2D 'confined-superhydrophobicity'. Further, this synthesized material was extended for addressing highly relevant and severe global challenges of 'oil-in-water' and 'water-in-oil' emulsion separation by either selective collection (with an efficiency of above 1000 wt%) of tiny oil-droplets from bulk water or forming magnetically active 'Pickering-type' aqueous droplets, respectively, under various practically relevant harsh conditions, including extremes of pH, salinity, surfactant contamination, etc. Further, appropriate functionalization of this chemically/magnetically active 2D nano-interface could be useful in developing functional interfaces for various applications related to energy, catalysis and healthcare.

A Review of Carbon-Based Materials for Safe Lithium Metal Anodes

Lithium metal is a promising anode material with extremely high theoretical specific capacity (3,860 mA h g⁻¹), low density (0.59 g cm⁻³), and the lowest negative electrochemical potential of all potential candidates (−3.04 V vs. the standard hydrogen electrode). However, uncontrollable Li dendrite growth leads to a short lifespan and catastrophic safety hazards, which has restricted its practical application for many years. Some effective strategies have been adopted regarding these challenges, including electrolyte modification, introducing a protective layer, nanostructured anodes, and membrane modification. Carbon-based materials have been demonstrated to significantly address the challenge of Li dendrites. In this review, carbon-based materials and their application and challenges in lithium metal anode protection have been discussed in detail. In addition, the applications of lithium anodes protected by carbon-based materials in Li-S batteries and Li-O₂ batteries have been summarized.

Synthesis of Three-Dimensional Graphene-Based Hybrid Materials for Water Purification: A Review

Graphene-based nanostructures and nanomaterials have been widely used for the applications in materials science, biomedicine, tissue engineering, sensors, energy, catalysis, and environmental science due to their unique physical, chemical, and electronic properties. Compared to two-dimensional (2D) graphene materials, three-dimensional (3D) graphene-based hybrid materials (GBHMs) exhibited higher surface area and special porous structure, making them excellent candidates for practical applications in water purification. In this work, we present recent advances in the synthesis and water remediation applications of 3D GBHMs. More details on the synthesis strategies of GBHMs, the water treatment techniques, and the adsorption/removal of various pollutants from water systems with GBHMs are demonstrated and discussed. It is expected that this work will attract wide interests on the structural design and facile synthesis of novel 3D GBHMs, and promote the advanced applications of 3D GBHMs in energy and environmental fields.

Femtosecond Laser-Structured Underwater "Superpolymphobic" Surfaces

In this work, the surfaces that repel liquid polydimethylsiloxane (PDMS) droplets in water were created by femtosecond laser treatment. We define this superwetting phenomenon as underwater "superpolymphobicity". The resultant underwater superpolymphobic silicon surface shows a contact angle of 159 ± 1° and a sliding angle of 1.5 ± 0.5° to liquid PDMS droplets in water. This underwater superpolymphobicity can be achieved on a wide range of hydrophilic materials, including semiconductors, glass, and metals. The adhesion between the liquid polymer and a solid substrate is effectively prevented by the underwater superpolymphobic microstructures. The underwater superpolymphobicity will have a great significance in designing the adhesion between the polymer and a solid substrate, controlling the shape of the cured polymer materials, as well as nearly all the applications based on the polymer materials.

Fully phosphorylated 3D graphene oxide foam for the significantly enhanced U(VI) sequestration

Efficient sequestration of U(VI) from complex aqueous solution is of vital importance for environmental remediation. In this work, the fully phosphorylated graphene oxide foam (phos-GOF) was synthesized via a facile hydrothermal method and the as-prepared 3D phos-GOF was served as an adsorbent to capture U(VI) from aqueous solution. The introduction of abundant phosphorus-containing groups via phytic acid endows phos-GOF good hydrophilia and excellent affinity for U(VI). The adsorption performance of phos-GOF for U(VI) was carefully evaluated under different environments. phos-GOF shows rapid and high efficiency for U(VI) adsorption. The maximum adsorption capacity of phos-GOF for U(VI) is ∼483 mg/g, which is much higher than that of pristine graphene oxide foam (GOF). In addition, the spent 3D phos-GOF can be easily regenerated by a simple and low-cost desorption process using 0.02 mol/L HNO₃. The interaction mechanism between phos-GOF and U(VI) is mainly attributed to the inner-sphere complexation between phosphoric functional groups and U(VI) based on a series of spectroscopic analyses. The 3D phos-GOF exhibits favorable sequestration performance towards U(VI) which can be used as a potential candidate in uranium-bearing wastewater treatment and disposal.

A review of femtosecond laser-structured superhydrophobic or underwater superoleophobic porous surfaces/materials for efficient oil/water separation

Oil/water separation (OWS) technology has become an increasingly crucial tool to protect the environment and reduce the economic losses caused by the discharge of oily wastewater and oil spills. Recently, porous materials with superwettability have been applied in effective OWS and have achieved tremendous success. Herein, we review recent advancements of OWS utilizing femtosecond (fs) laser-structured superhydrophobic or underwater superoleophobic porous materials. We will review the enabling materials processing and treatment methods, their surface wettability, the separating methods and processes, and the separation mechanisms. Inspired by lotus leaves and fish scales, superhydrophobic and underwater superoleophobic properties are artificially achieved on substrate surfaces by fs laser processing. By using fs laser-structured superwetting porous materials, various oil/water mixtures (OWMs) are successfully separated through different separation methods. Presently, the research of fs laser-based OWS is still in its infancy. We will also discuss the current challenges and future prospects in this emerging field. It is expected that the advanced features of fs laser microfabrication will lead to exciting applications for OWS.

Wettability of graphene: from influencing factors and reversible conversions to potential applications

As a member of the carbon material family, graphene has long been the focus of research on account of its abundant excellent properties. Nevertheless, many previous research works have attached much importance to its mechanical capacity and electrical properties, and not to its surface wetting properties with respect to water. In this review, a series of methods are put forward for characterization of the water contact angle of graphene, such as experimental measurements, classic molecular dynamics simulations, and formula calculations. A series of factors that affect the wettability of graphene, including defects, controllable atmosphere, doping, and electric field, are also discussed in detail, and have rarely have been covered in other review articles before. Finally, with the developments of smart surfaces, a reversible wettability variation of graphene from hydrophobic to hydrophilic is important in the presence of external stimulation and is discussed in detail herein. It is anticipated that graphene could serve as a tunable wettability coating for further developments in electronic devices and brings a new perspective to the construction of smart material surfaces.

A femtosecond laser-induced superhygrophobic surface: beyond superhydrophobicity and repelling various complex liquids

Surfaces that can strongly repel various complex liquids, not just pure water, are highly desirable and the fabrication of such surfaces still remains a huge challenge because the liquids one wants to repel usually have a complex chemical composition, viscosity, and concentration. Here, a superhygrophobic surface microstructure was created on a polytetrafluoroethylene (PTFE) surface by femtosecond laser treatment. The laser-ablated surface was composed of a micro/nanoscale hierarchical structure and micropores with a certain degree of re-entrant curvature. After femtosecond laser ablation, the sample surface is directly endowed with superhygrophobicity and has great ability to repel various pure and complex liquids, such as water, 10 000 ppm bovine serum albumin, cola, 10 000 ppm glucose, juice, and saline. It is because the combined effect of the ultralow surface energy of the PTFE material, the laser-induced hierarchical rough microstructure, and the partly re-entrant surface curvature of the porous structure allows the complex liquid droplets to be at the robust Cassie state on the laser-induced surface microstructure. Such superhygrophobic surfaces can be potentially applied in cell engineering, medical instruments, food packaging, microfluidics technology, chemical engineering, and so on.

Lithium anode stable in air for low-cost fabrication of a dendrite-free lithium battery

Lithium metal, the ideal anode material for rechargeable batteries, suffers from the inherent limitations of sensitivity to the humid atmosphere and dendrite growth. Herein, low-cost fabrication of a metallic-lithium anode that is stable in air and plated dendrite-free from an organic-liquid electrolyte solves four key problems that have plagued the development of large-scale Li-ion batteries for storage of electric power. Replacing the low-capacity carbon anode with a safe, dendrite-free lithium anode provides a fast charge while reducing the cost of fabrication of a lithium battery, and increasing the cycle life of a rechargeable cell by eliminating the liquid-electrolyte ethylene-carbonate additive used to form a solid-electrolyte interphase passivation layer on the anode that is unstable during cycling. This solution is accomplished by formation of a hydrophobic solid-electrolyte interphase on a metallic-lithium anode that allows for handling of the treated lithium anode membrane in a standard dry room during cell fabrication.

The lithium metal is a promising anode material for batteries; however, the growth of dendrite and its instability against moisture are two technical challenges. Here the authors address both issues by introducing a bifunctional layer consisting of hydrophobic graphite fluoride and lithium fluoride.

Robust Superhydrophobic/Superoleophilic Wrinkled Microspherical MOF@rGO Composites for Efficient Oil-Water Separation

Graphene/MOF-based composite materials in three-dimensional (3D) architectures are promising for the treatment of oil-containing wastewater by absorption owing to their intrinsic properties of graphene and metal-organic frameworks (MOFs), such as high porosity, ultralow density, and facilely tailored superwettability. In this study, novel wrinkled 3D microspherical MOF@rGO composites with both superhydrophobic and superoleophilic properties were developed by embedding MOF nanoparticles between graphene oxide (GO) nanosheets, followed by high-temperature reduction self-assembly. The microspherical composites feature a unique micro/nano hierarchy consisting of crumpled reduced GO (rGO) nanosheets intercalated with well-dispersed MOF nanoparticles. Combined with the superwettability and abundant meso/microporosity, the peculiar architectures of wrinkled ZIF-8@rGO microspheres show very fast absorption rates and high sorption selectivity for organic solvents and oils from water.