Modification of Antibacterial Copolymers on the Surface of PVA-Based Microfibers via Thermal Cross-Linking and Their Antibacterial Properties

Bacterial infections on material surfaces are a serious public health concern worldwide. Although poly(vinyl alcohol) (PVA)-based materials have great potential as medical devices, they lack antibacterial properties on their surfaces and pose bacterial infection risks during implantation surgery. Copolymers containing antibacterial [2-(methacryloyloxy)ethyl]trimethylammonium chloride (METAC) units were used to modify the surfaces of chemically cross-linked water-insoluble PVA-based microfibers. The copolymers also had carboxy units that were used to react with the hydroxy group of the PVA-based microfibers via a simple thermal treatment at 135 °C. PVA-based materials containing METAC units exhibit significant swelling due to electrostatic repulsions. Because the copolymers were modified on the extreme surface of the microfibers, no difference in the diameters between unmodified microfibers (PM-fiber) and copolymers with METAC unit-modified microfibers (PM-METAC-fiber), in both the dry and swollen states, was observed. The viable bacterial cell numbers, which were evaluated by colony counting, decreased by exposure to the poly(METAC-co-methacrylic acid (MAAc)) aqueous solution or PM-METAC-fibers. The value of CFU/mL decreased to 0.1% (against B. subtilis) and 3.9% (against E. coli) after contact with the PM-METAC-fibers compared to the PM-fibers. The percentage of hemolysis against rabbit red blood cells was equivalent to that of the negative control, suggesting that PM-METAC-fibers can selectively exhibit antibacterial properties. This modification method can be applied to various PVA-based materials if hydroxy groups are present on their surface. This study provides a facile, cost-effective, and promising strategy to impart antibacterial properties to the surface of PVA-based materials without significantly affecting their physicochemical properties.

Engineered polymeric excipients for enhancing the stability of protein biologics: Poly(N-isopropylacrylamide)-poly(ethylene glycol) (PNIPAM-PEG) block copolymers

Protein therapeutics, particularly antibodies, depend on maintaining their native structures for optimal function. Hydrophobic interfaces, such as the air-water interface, can trigger protein aggregation and denaturation. While completely avoiding such interfacial exposures during manufacturing and storage is impractical, minimizing them is crucial for enhancing protein drug stability and extending shelf life. In the biologics industry, surfactants like polysorbates are commonly used as additives (excipients) to mitigate these undesirable interfacial exposures. However, polysorbates, the most prevalent choice, have recognized limitations in terms of polydispersity, purity, and stability, prompting the exploration of alternative excipients. The present study identifies poly(N-isopropylacrylamide)-poly(ethylene glycol) (PNIPAM-PEG) block copolymers as a promising alternative to polysorbates. Due to its stronger affinity for the air-water interface, PNIPAM-PEG significantly outperforms polysorbates in enhancing protein stability. This claim is supported by results from multiple tests. Accelerated dynamic light scattering (DLS) experiments demonstrate PNIPAM-PEG's exceptional efficacy in preserving IgG stability against surface-induced aggregation, surpassing conventional polysorbate excipients (Tween 80 and Tween 20) under high-temperature conditions. Additionally, circular dichroism (CD) spectroscopy results reveal conformational alterations associated with aggregation, with PNIPAM-PEG consistently demonstrates a greater protective effect by mitigating negative shifts at λ ≅ 220 nm, indicative of changes in secondary structure. Overall, this study positions PNIPAM-PEG as a promising excipient for antibody therapeutics, facilitating the development of more stable and effective biopharmaceuticals.

Synthesis of Well-Defined Poly(vinyl alcohol-co-vinyl acetate) Copolymers by Alcoholysis of Poly(vinyl acetate) Synthesized by Macromolecular Design via Interchange of Xanthate Polymerization, and Their Use as a Stabilizer in Emulsion (Co)polymerization of Vinyl Acetate

This work aims at synthesizing tailor-made poly(vinyl alcohol-co-vinyl acetate) (PVA) amphiphilic copolymers, obtained by alcoholysis of poly(vinyl acetate) (PVAc) that could display improved properties as stabilizers compared to commercially available PVAs. Well-defined PVAs with different alcoholysis degrees were produced from a library of PVAc homopolymers synthesized by macromolecular design via interchange of xanthate polymerization and exhibiting different degrees of polymerization degrees. Subsequently, these PVAs were evaluated as stabilizers in the emulsion copolymerization of VAc and vinyl neodecanoate (VERSA 10, referred to as V10) and compared to a commercially available reference PVA obtained by alcoholysis of PVAc formed by conventional radical polymerization. In all cases, stable latexes were obtained and compared in terms of their colloidal characteristics. To identify the best stabilizer candidate, the amount of PVA remaining in water and not participating to the particle stabilization was evaluated in each case.

Toward Humidity-Independent Sensitive and Fast Response Temperature Sensors Based on Reduced Graphene Oxide/Poly(vinyl alcohol) Nanocomposites

Flexible temperature sensors are becoming increasingly important these days. In this work, we explore graphene oxide (GO)/poly(vinyl alcohol) (PVA) nanocomposites for potential application in temperature sensors. The influence of the mixing ratio of both materials, the reduction temperature, and passivation on the sensing performance has been investigated. Various spectroscopic techniques revealed the composite structure and atomic composition. These were complemented by semiempirical quantum chemical calculations to investigate rGO and PVA interaction. Scanning electron and atomic force microscopy measurements were carried out to evaluate dispersion and coated film quality. The temperature sensitivity has been evaluated for several composite materials with different compositions in the range from 10 to 80 °C. The results show that a linear temperature behavior can be realized based on rGO/PVA composites with temperature coefficients of resistance (TCR) larger than 1.8% K-1 and a fast response time of 0.3 s with minimal hysteresis. Furthermore, humidity influence has been investigated in the range from 10% to 80%, and a minor effect is shown. Therefore, we can conclude that rGO/PVA composites have a high potential for excellent passivation-free, humidity-independent, sensitive, and fast response temperature sensors for various applications. The GO reduction is tunable, and PVA improves the rGO/PVA sensor performance by increasing the tunneling effect and band gap energy, consequently improving temperature sensitivity. Additionally, PVA exhibits minimal water absorption, reducing the humidity sensitivity. rGO/PVA maintains its temperature sensitivity during and after several mechanical deformations.

Effect of Polyethylene Glycol Methyl Ether Methacrylate on the Biodegradability of Polyvinyl Alcohol/Starch Blend Films

Blend copolymers (PVA/S) were grafted with polyethylene glycol methyl methacrylate (PEGMA) with different ratios. Potassium persulfate was used as an initiator. The blend copolymer (PVA/S) was created by combining poly(vinyl alcohol) (PVA) with starch (S) in various ratios. The main idea was to study the effect of different ratios of the used raw materials on the biodegradability of plastic films. The resulting polymers (PVA/S/PEGMA) were analyzed using FTIR spectroscopy to investigate the hydrogen bond interaction between PVA, S, and PEGMA in the mixtures. TGA and SEM analyses were used to characterize the polymers (PVA/S/AA). The biodegradability and mechanical properties of the PVA/S/PEGMA blend films were evaluated. The findings revealed that the mechanical properties of the blend films are highly influenced by PEGMA. The time of degradation of the films immersed in soil and Coca-Cola increases as the contents of PVA and S and the molecular weight (MW) of PEGMA increase in the terpolymer. The M8 sample (PVA/S/PEGMA in the ratio of 3:1:2, respectively) with a MW of 950 g/mol produced the lowest elongation at break (67.5%), whereas M1 (PVA/S/PEGMA in the ratio of 1:1:1, respectively) with a MW of 300 g/mol produced the most (150%). The film's tensile strength and elongation at break were improved by grafting PEGMA onto the blending polymer (PAV-b-S). Tg and Tm increased when the PEGMA MW increased from 300 to 950. Tg (48.4 °C) and Tm (190.9 °C) were the lowest in M1 (300), while Tg (84.8 °C) and Tm (190.9 °C) were greatest in M1 (950) at 209.3 °C. The increased chain and molecular weight of PEGMA account for the increase in Tg and Tm of the copolymers.

Ice nucleation in aqueous solutions of short- and long-chain poly(vinyl alcohol) studied with a droplet microfluidics setup

Poly(vinyl alcohol) (PVA) has ice binding and ice nucleating properties. Here, we explore the dependence of the molecular size of PVA on its ice nucleation activity. For this purpose, we studied ice nucleation in aqueous solutions of PVA samples with molar masses ranging from 370 to 145 000 g mol-1, with a particular focus on oligomer samples with low molar mass. The experiments employed a novel microfluidic setup that is a follow-up on the previous WeIzmann Supercooled Droplets Observation on a Microarray (WISDOM) design by Reicher et al. The modified setup introduced and characterized here, termed nanoliter Bielefeld Ice Nucleation ARraY (nanoBINARY), uses droplet microfluidics with droplets (96 ± 4) µm in diameter and a fluorinated continuous oil phase and surfactant. A comparison of homogeneous and heterogeneous ice nucleation data obtained with nanoBINARY to those obtained with WISDOM shows very good agreement, underpinning its ability to study low-temperature ice nucleators as well as homogeneous ice nucleation due to the low background of impurities. The experiments on aqueous PVA solutions revealed that the ice nucleation activity of shorter PVA chains strongly decreases with a decrease in molar mass. While the cumulative number of ice nucleating sites per mass nm of polymers with different molar masses is the same, it becomes smaller for oligomers and completely vanishes for dimer and monomer representatives such as 1,3-butanediol, propan-2-ol, and ethanol, most likely because these molecules become too small to effectively stabilize the critical ice embryo. Overall, our results are consistent with PVA polymers and oligomers acting as heterogeneous ice nucleators.

Ibuprofen-loaded electrospun poly(ethylene-co-vinyl alcohol) nanofibers for wound dressing applications

Chronic wounds are characterized by a prolonged inflammation phase preventing the normal processes of wound healing and natural regeneration of the skin. To tackle this issue, electrospun nanofibers, inherently possessing a high surface-to-volume ratio and high porosity, are promising candidates for the design of anti-inflammatory drug delivery systems. In this study, we evaluated the ability of poly(ethylene-co-vinyl alcohol) nanofibers of various chemical compositions to release ibuprofen for the potential treatment of chronic wounds. First, the electrospinning of poly(ethylene-co-vinyl alcohol) copolymers with different ethylene contents (32, 38 and 44 mol%) was optimized in DMSO. The morphology and surface properties of the membranes were investigated via state-of-the-art techniques and the influence of the ethylene content on the mechanical and thermal properties of each membrane was evaluated. Furthermore, the release kinetics of ibuprofen from the nanofibers in a physiological temperature range revealed that more ibuprofen was released at 37.5 °C than at 25 °C regardless of the ethylene content. Additionally, at 25 °C less drug was released when the ethylene content of the membranes increased. Finally, the scaffolds showed no cytotoxicity to normal human fibroblasts collectively paving the way for the design of electrospun based patches for the treatment of chronic wounds.

Elucidating the nanostructure of small interfering RNA-loaded lipidoid-polymer hybrid nanoparticles

We analyzed the structural and material properties of small interfering RNA (siRNA)-loaded lipid-polymer hybrid nanoparticles (LPNs) containing ionizable lipidoid and poly(dl-lactic-co-glycolic acid) (PLGA) using small-angle X-ray scattering, cryogenic transmission electron microscopy, polarized light microscopy, the Langmuir monolayer methodology, differential scanning calorimetry, and attenuated total reflectance Fourier-transform infrared (ATR-FTIR) spectroscopy. Scattering analyses showed that bulk lipidoid self-assemble into lamellar structures with a d-spacing of 38 Å, whereas lipidoid-siRNA lipoplexes display an in-plane lateral organization of siRNA in between lipidoid bilayers with a repeat distance of approximately 55 Å. The siRNA-loaded LPNs adopted a core-shell structure with an interaxial alignment of siRNA between lipidoid shell bilayers. Langmuir monolayer experiments showed a distinct interaction between the lipidoid headgroups and siRNA, which was dependent on buffer subphase pH. Thermal analyses suggested that PLGA and lipidoid interact, which was evident from a shift in the phase transition temperature of lipidoid, and the thermotropic phase behavior of lipidoid was affected by inclusion of siRNA. ATR-FTIR data confirmed the shift or disappearance of characteristic absorption bands of siRNA after lipidoid binding. In conclusion, siRNA-loaded LPNs display a core-shell structure, wherein the polymeric core functions as a colloid matrix support for siRNA-loaded lipidoid shell layers.

Poly(vinyl alcohol) Molecular Bottlebrushes Nucleate Ice

Ice binding proteins (IBP) have evolved to limit the growth of ice but also to promote ice formation by ice-nucleating proteins (INPs). IBPs, which modulate these seemingly distinct processes, often have high sequence similarities, and molecular size/assembly is hypothesized to be a crucial determinant. There are only a few synthetic materials that reproduce INP function, and rational design of ice nucleators has not been achieved due to outstanding questions about the mechanisms of ice binding. Poly(vinyl alcohol) (PVA) is a water-soluble synthetic polymer well known to effectively block ice recrystallization, by binding to ice. Here, we report the synthesis of a polymeric ice nucleator, which mimics the dense assembly of IBPs, using confined ice-binding polymers in a high-molar-mass molecular bottlebrush. Poly(vinyl alcohol)-based molecular bottlebrushes with different side-chain densities were synthesized via a combination of ring-opening metathesis polymerization (ROMP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization, using "grafting-to" and "grafting-through" approaches. The facile preparation of the PVA bottlebrushes was performed via selective hydrolysis of the acetate of the poly(vinyl acetate) (PVAc) side chains of the PVAc bottlebrush precursors. Ice-binding polymer side-chain density was shown to be crucial for nucleation activity, with less dense brushes resulting in colder nucleation than denser brushes. This bio-inspired approach provides a synthetic framework for probing heterogeneous ice nucleation and a route toward defined synthetic nucleators for biotechnological applications.

Injectable Crosslinked Genipin Hybrid Gelatin-PVA Hydrogels for Future Use as Bioinks in Expediting Cutaneous Healing Capacity: Physicochemical Characterisation and Cytotoxicity Evaluation

The irregular shape and depth of wounds could be the major hurdles in wound healing for the common three-dimensional foam, sheet, or film treatment design. The injectable hydrogel is a splendid alternate technique to enhance healing efficiency post-implantation via injectable or 3D-bioprinting technologies. The authentic combination of natural and synthetic polymers could potentially enhance the injectability and biocompatibility properties. Thus, the purpose of this study was to characterise a hybrid gelatin−PVA hydrogel crosslinked with genipin (GNP; natural crosslinker). In brief, gelatin (GE) and PVA were prepared in various concentrations (w/v): GE, GPVA3 (3% PVA), and GPVA5 (5% PVA), followed by a 0.1% (w/v) genipin (GNP) crosslink, to achieve polymerisation in three minutes. The physicochemical and biocompatibility properties were further evaluated. GPVA3_GNP and GPVA5_GNP with GNP demonstrated excellent physicochemical properties compared to GE_GNP and non-crosslinked hydrogels. GPVA5_GNP significantly displayed the optimum swelling ratio (621.1 ± 93.18%) and excellent hydrophilicity (38.51 ± 2.58°). In addition, GPVA5_GNP showed an optimum biodegradation rate (0.02 ± 0.005 mg/h) and the highest mechanical strength with the highest compression modulus (2.14 ± 0.06 MPa). In addition, the surface and cross-sectional view for scanning electron microscopy (SEM) displayed that all of the GPVA hydrogels have optimum average pore sizes (100−199 μm) with interconnected pores. There were no substantial changes in chemical analysis, including FTIR, XRD, and EDX, after PVA and GNP intervention. Furthermore, GPVA hydrogels influenced the cell biocompatibility, which successfully indicated >85% of cell viability. In conclusion, gelatin−PVA hydrogels crosslinked with GNP were proven to have excellent physicochemical, mechanical, and biocompatibility properties, as required for potential bioinks for chronic wound healing.

Morphological study of electrospun chitosan/poly(vinyl alcohol)/glycerol nanofibres for skin care applications

This study aimed to evaluate the influence of formulation and procedure parameters in obtaining thick and continuous chitosan/PVA/glycerol nanofibres to be applied in skin care. For that, the polymers were characterized by nuclear magnetic resonance, Fourier-transform infrared spectroscopy, and size-exclusion chromatography. After this, 96 chitosan/PVA/glycerol nanofibre scaffolds were prepared by electrospinning method, using factorial designs. The independent variables were crude and pure chitosan, 2 brands of PVA, 2 needle gauges, high and low polymer concentration, high and low glycerol concentration, and final solution with and without ultrafiltration. Morphological analysis was performed by scanning electron microscopy, atomic force microscopy, and confocal microscopy. The best sample (NF67) presented an average thickness of 268.3 nm, uniform distribution, and high yield. It was obtained at a 1:3.5 (crude chitosan: PVA with lower molecular weight, but more hydrolysed) ratio and lower glycerol concentration, suggesting that the degree of hydrolysis of the PVA is more important than its molecular weight for obtaining better quality nanofibres and that the glycerol also makes the electrospinning process difficult. Thus, it was possible to choose parameters that provide scaffolds that could be applied as a matrix extracellular-like material in wound healing.

Nonionic nontoxic antimicrobial polymers: indole-grafted poly(vinyl alcohol) with pendant alkyl or ether groups

A series of new nonionic antimicrobial polymers with a biodegradable polyvinyl alcohol (PVA) backbone grafted with indole units and different hydrophobic alkyl or ether groups were synthesized by facile esterification.

Thermoresponsive Polymers Based on Tertiary Amine Moieties

Thermoresponsive polymers exhibiting unique reversible phase transition properties in aqueous solution in response to temperature stimuli have been extensively investigated. In the past two decades, thermoresponsive polymers based on tertiary amine moieties have achieved considerable progress and become an important family of thermoresponsive polymers, including tertiary amine functionalized poly((meth)acrylamide)s, poly((meth)acrylate)s, poly(styrene)s, poly(vinyl alcohol)s, and poly(ethylene oxide)s, which exhibit lower critical solution temperature and/or upper critical solution temperature in water or aliphatic alcohols. Their phase transition behavior can be modulated by the solution pH and CO₂ due to the protonation of tertiary amine moieties in acidic condition and deprotonation in alkaline condition and the charged ammonium bicarbonate formed by the tertiary amine moieties and CO₂ . The aim of this review is to summarize the recent progress in the thermoresponsive polymers based on tertiary amine moieties.

Size and Shape Control of Ice Crystals by Amphiphilic Block Copolymers and Their Implication in the Cryoprotection of Mesenchymal Stem Cells

Precise control over the size and shape of ice crystals is a key factor to consider in designing antifreezing and cryoprotecting molecules for cryopreservation of cells. Here, we report that a poly(ethylene glycol)-poly(l-alanine) (PEG-PA) block copolymer exhibits excellent cryoprotecting properties for stem cells and antifreezing properties for water. As the molecular weight of PA increased from 500, 760, and 1750 Da (P1, P2, and P3) at the same PEG molecular weight of 5000 Da, the β-sheet content decreased and α-helix content increased. Comparing P2 (PEG-PA; 5000-760) and P4 (PEG-PA: 1000-750), β-sheets increased as the PEG block length decreased. The critical micelle concentration of the PEG-PA block copolymers was in a range of 0.5-3.0 mg/mL and was proportional to the hydrophobicity of the PEG-PA block copolymers. The P1, P2, and P3 self-assembled into spherical micelles, whereas P4 formed micelles with cylindrical morphology. The difference in the block copolymer structure affected ice recrystallization inhibition (IRI) activity and cryopreservation of cells. IRI activity was assayed via mean largest grain size (MLGS), and interactions between polymers and ice crystal surfaces were studied by dynamic ice-shaping studies. The MLGS decreased to 58 → 53 → 45 → 35 → 23% of that of PBS, as the polymer (PEG-PA 5000-500) concentration increased from 0.0 (PBS; control) → 1.0 → 5.0 → 10 → 30 → 50 mg/mL. The MLGS of PEG 5k solutions (negative control) decreased to 74 → 71 → 64 → 44 → 37% of that of PBS in the same concentration range. P3 and P4 with a longer hydrophobic PA block developed elongated ice crystals at above 30 mg/mL. The dynamic ice-shaping study exhibited that ice crystals became needle-shaped, as the hydrophobicity of the polymer increased as in P2-P4. The cell recovery in the P1 system after cryopreservation at -196 °C for 7 days was 87% of that of the dimethyl sulfoxide (DMSO) 10% system (positive control). The cell recovery was 48% for the P2 system and drastically decreased to less than 30% of that of the DMSO 10% system in the P3, P4, PEG 5k, PEG 1k, PVA 80H, and PVA 100H systems. Current studies suggest that IRI activity, round ice crystal shaping, and membrane stabilization activity of P1 cooperatively provide excellent cell recovery among the candidate systems. Recovered stem cells exhibited excellent proliferation and multilineage differentiation into osteocytes, chondrocytes, and adipocytes. To conclude, the PEG-PA (5000-500) block copolymer is suggested to be a promising antifreezing cryoprotectant for stem cells.

Influence of PVAc/PVA Hydrolysis on Additive Surface Activity

This aims to establish design rules for the influence of complex polymer matrices on the surface properties of small molecules. Here, we consider the dependence of the surface behaviour of some model additives on polymer matrix hydrophobicity. With stoichiometric control over hydrolysis, we generate systematic changes in matrix chemistry from non-polar, hydrophobic PVAc to its hydrolysed and hydrophilic analogue, PVA. With the changing degree of hydrolysis (DH), the behaviour of additives can be switched in terms of compatibility and surface activity. Sorbitol, a polar sugar-alcohol of inherently high surface energy, blooms to the surface of PVAc, forming patchy domains on surfaces. With the increasing DH of the polymer matrix, its surface segregation decreases to the point where sorbitol acts as a homogeneously distributed plasticiser in PVA. Conversely, and despite its low surface energy, octanoic acid (OA) surprisingly causes the increased wettability of PVAc. We attribute these observations to the high compatibility of OA with PVAc and its ability to reorient upon exposure to water, presenting a hydrophilic COOH-rich surface. The surfactant sodium dodecyl sulfate (SDS) does not show such a clear dependence on the matrix and formed wetting layers over a wide range of DH. Interestingly, SDS appears to be most compatible with PVAc at intermediate DH, which is consistent with the amphiphilic nature of both species under these conditions. Thus, we show that the prediction of the segregation is not simple and depends on multiple factors including hydrophobicity, compatibility, blockiness, surface energy, and the mobility of the components.

Dispersed Association of Single-Component Short-Alkyl Chains toward Thermally Programmable and Malleable Multiple-Shape Hydrogel

In pursuit of intelligent hydrogel-based devices, it is imperative to concurrently enhance the shape programmability and customization of hydrogels in order to realize sophisticated actuation and implantation. Until now, multiple temporary shapeshifting of hydrogels has required either multiple external stimuli or distinct thermal-transition phases. In addition, reprocessing the permanent shape of hydrogel mostly relies on the change in their components. These complex prerequisites present challenges to programmability and customization of application-related shapes for hydrogels. This paper reports a type of thermally programmable and malleable multiple-shape hydrogel. The network of this hydrogel is solely composed of a type of polyvinyl alcohol derivative, which is synthesized by substituting hydroxyl groups of polyvinyl alcohol with single-component octyl chains. Through water-vapor exchange and heating in water, these single-component octyl side chains form dispersed clusters with a large strength gradient. Such broadly dispersed clusters serve as switchable segments and dynamic net-points to orthotopically offer multiple (e.g., quintuple) temporary shapes and editable permanent shapes, respectively, thereby realizing sophisticated and designed shape changes. This hydrogel system can act as a smart device for on-demand bidirectional twining around a 1D substrate. Such a capability potentially enables the self-mounting and self-detaching behavior of soft devices on tissues with minimal invasion.

Mimicking the Ice Recrystallization Activity of Biological Antifreezes. When is a New Polymer "Active"?

Antifreeze proteins and ice-binding proteins have been discovered in a diverse range of extremophiles and have the ability to modulate the growth and formation of ice crystals. Considering the importance of cryoscience across transport, biomedicine, and climate science, there is significant interest in developing synthetic macromolecular mimics of antifreeze proteins, in particular to reproduce their property of ice recrystallization inhibition (IRI). This activity is a continuum rather than an "on/off" property and there may be multiple molecular mechanisms which give rise to differences in this observable property; the limiting concentrations for ice growth vary by more than a thousand between an antifreeze glycoprotein and poly(vinyl alcohol), for example. The aim of this article is to provide a concise comparison of a range of natural and synthetic materials that are known to have IRI, thus providing a guide to see if a new synthetic mimic is active or not, including emerging materials which are comparatively weak compared to antifreeze proteins, but may have technological importance. The link between activity and the mechanisms involving either ice binding or amphiphilicity is discussed and known materials assigned into classes based on this.

Grafting of Polymer Brushes from Xanthate-Functionalized Silica Particles

Monodisperse silica particles (SiPs) were surface-modified with a newly designed silane coupling agent comprising a triethoxysilane and an alkyl halide, namely, 6-(triethoxysilyl)hexyl 2-bromopropionate, which was further treated with potassium O-ethyl dithiocarbonate (PEX) to immobilize xanthate molecules on the particle surfaces. Surface-initiated macromolecular design via interchange of xanthates (MADIX) polymerization of vinyl acetate (VAc) was conducted with the xanthate-functionalized SiPs. The polymerization was well controlled and produced SiPs coated with poly(vinyl acetate) (PVAc) with a well-defined target molar mass and a graft density of about 0.2 chains nm^-2 . Dynamic light scattering and TEM measurements revealed that the hybrid particles were highly dispersible in good solvents without any aggregation. The PVAc brushes were hydrolyzed with hydrochloric acid to produce poly(vinyl alcohol) brushes on the SiP surfaces. In addition, the number of xanthate molecules introduced on the SiP surfaces could be successfully controlled by adjusting the concentration of PEX. Thus, the SiPs have two functionalities: xanthates able to act as a MADIX chain-transfer agent and alkyl bromide initiation sites for atom transfer radical polymerization (ATRP). By using these unique bifunctional particles, mixed polymer brushes were constructed on the SiPs by MADIX of VAc followed by ATRP of styrene or methyl methacrylate.

Synthesis and evaluation of water soluble pH sensitive poly (vinyl alcohol)-doxorubicin conjugates

The accuracy of spatiotemporal control cargo delivery and release are primordial to enhance the therapeutic efficiency and decrease the undesirable effects, in this context a novel prodrug were developed based on biocompatible polyvinyl alcohol (PVA) substrate. PVA was conjugated to doxorubicin (PVA-DOX) via an acid-labile hydrazone linkage. PVA was first functionalized with acidic groups, then reacted with hydrazine hydrate to form an amide bond. The amine group of PVA hydrazide was linked to carbonyl group (C = O) of DOX to form a pH sensitive hydrazone bond. The molecular structure of the PVA-DOX was confirmed by FTIR, XPS, and ¹H-NMR analysis methods. The degree of grafting were evaluated by TGA and confirmed by XPS, which reveals the successful bond attachment of DOX to PVA. Our findings confirm pH dependent DOX release from PVA-DOX prodrug with faster release rate in acidic environment (pH 5.0, pH 6.0) and slower release rate in neutral pH environment (pH 7.4). Compared to the primary DOX, our synthesized PVA-DOX conjugates could exhibit a promising therapeutic effect, high biocompatibility and zero premature release. The results prove the successful synthesis of PVA-DOX conjugates with high efficiency.

Beyond PEGylation: Alternative surface-modification of nanoparticles with mucus-inert biomaterials

Mucus is a highly hydrated viscoelastic gel present on various moist surfaces in our body including the eyes, nasal cavity, mouth, gastrointestinal, respiratory and reproductive tracts. It serves as a very efficient barrier that prevents harmful particles, viruses and bacteria from entering the human body. However, the protective function of the mucus also hampers the diffusion of drugs and nanomedicines, which dramatically reduces their efficiency. Functionalisation of nanoparticles with low molecular weight poly(ethylene glycol) (PEGylation) is one of the strategies to enhance their penetration through mucus. Recently a number of other polymers were explored as alternatives to PEGylation. These alternatives include poly(2-alkyl-2-oxazolines), polysarcosine, poly(vinyl alcohol), other hydroxyl-containing non-ionic water-soluble polymers, zwitterionic polymers (polybetaines) and mucolytic enzymes. This review discusses the studies reporting the use of these polymers or potential application to facilitate mucus permeation of nanoparticles.

Tough and durable hydrogels with robust skin layers formed via soaking treatment

Simple soaking treatment generates layered hydrogels with a combination of superior mechanics and chemical robustness.

Preparation and Characterization of Water-Soluble Xylan Ethers

Xylan is a predominant hemicellulose component that is found in plants and in some algae. This polysaccharide is made from units of xylose (a pentose sugar). One promising source of xylan is oat spelt. This feedstock was used for the synthesis of two xylan ethers. To achieve water soluble products, we prepared dihydroxypropyl xylan as a non-ionic ether on the one hand, and carboxymethyl xylan as an ionic derivative on the other hand. Different preparation methods like heterogeneous, pseudo-homogeneous, and homogeneous syntheses were compared. In the case of dihydroxypropyl xylan, the synthesis method did not significantly affect the degree of substitution (DS). In contrast, in the case of carboxymethyl xylan, clear differences of the DS values were found in dependence on the synthesis method. Xylan ethers with DS values of >1 could be obtained, which mostly show good water solubility. The synthesized ionic, as well as non-ionic, xylan ethers were soluble in water, even though the aqueous solutions showed slight turbidity. Nevertheless, stable, transparent, and stainable films could be prepared from aqueous solutions from carboxymethyl xylans.

Regioregular Alternating Polyampholytes Have Enhanced Biomimetic Ice Recrystallization Activity Compared to Random Copolymers and the Role of Side Chain versus Main Chain Hydrophobicity

Antifreeze proteins from polar fish species are potent ice recrystallization inhibitors (IRIs) effectively stopping all ice growth. Additives that have IRI activity have been shown to enhance cellular cryopreservation with potential to improve the distribution of donor cells and tissue. Polyampholytes, polymers with both anionic and cationic side chains, are a rapidly emerging class of polymer cryoprotectants, but their mode of action and the structural features essential for activity are not clear. Here regioregular polyampholytes are synthesized from maleic anhydride copolymers to enable stoichiometric installation of the charged groups, ensuring regioregularity, which is not possible using conventional random copolymerization. A modular synthetic strategy is employed to enable the backbone and side chain hydrophobicity to be varied, with side chain hydrophobicity found to have a profound effect on the IRI activity. The activity of the regioregular polymers was found to be superior to those derived from a standard random copolymerization with statistical incorporation of monomers, demonstrating that sequence composition is crucial to the activity of IRI active polyampholytes.

Surfactant-free RAFT emulsion polymerization using a novel biocompatible thermoresponsive polymer

A facile, high-scale, and versatile technique to prepare biocompatible nanoparticles with tailorable properties from thermoresponsive macro-CTAs and macro-stabilizers.

RAFT polymerization to form stimuli-responsive polymers

Stimuli-responsive polymers respond to a variety of external stimuli, which include optical, electrical, thermal, mechanical, redox, pH, chemical, environmental and biological signals. This paper is concerned with the process of forming such polymers by RAFT polymerization.

Post-synthetic modification of polyvinyl alcohol with a series of N-alkyl-substituted carbamates towards thermo and CO2-responsive polymers

Intensive efforts have been devoted to the synthesis of thermoresponsive polymers with terminal N-alkyl-substituted groups.

pH-Tunable Thermoresponsive PEO-Based Functional Polymers with Pendant Amine Groups

Thermoresponsive polymers exhibiting lower critical solution temperatures (LCSTs) in aqueous solution have garnered considerable attention for the development of smart materials. Herein, we report the synthesis and properties of pH-tunable thermoresponsive poly(ethylene oxide) (PEO)-based functional polymers bearing pendant amine groups with varying cloud points. Well-defined poly(ethylene oxide-co-allyl glycidyl ether) (P(EO-co-AGE)) copolymers were prepared via controlled anionic ring-opening copolymerization of ethylene oxide (EO) with 10 mol % of a functional allyl glycidyl ether (AGE) comonomer. Facile, modular thiol-ene click chemistry was then employed to introduce a library of different aminothiols as side chains to the initial P(EO-co-AGE) copolymer. Depending on the nature of the pendant amine groups (primary amine, dimethylamine, and diethylamine) and the hydrophobicity of the side chains (ethyl, propyl, and hexyl), the cloud points could be tuned from 44-100 °C under different pH conditions. This is the first systematic investigation into the effect of PEO copolymer side chains on cloud point, which opens up the opportunity to make new thermoresponsive polymers for a variety of smart material applications.

Influence of Block Copolymerization on the Antifreeze Protein Mimetic Ice Recrystallization Inhibition Activity of Poly(vinyl alcohol)

Antifreeze (glyco) proteins are produced by many cold-acclimatized species to enable them to survive subzero temperatures. These proteins have multiple macroscopic effects on ice crystal growth which makes them appealing for low-temperature applications-from cellular cryopreservation to food storage. Poly(vinyl alcohol) has remarkable ice recrystallization inhibition activity, but its mode of action is uncertain as is the extent at which it can be incorporated into other high-order structures. Here the synthesis and characterization of well-defined block copolymers containing poly(vinyl alcohol) and poly(vinylpyrrolidone) by RAFT/MADIX polymerization is reported, as new antifreeze protein mimetics. The effect of adding a large second hydrophilic block is studied across a range of compositions, and it is found to be a passive component in ice recrystallization inhibition assays, enabling retention of all activity. In the extreme case, a block copolymer with only 10% poly(vinyl alcohol) was found to retain all activity, where statistical copolymers of PVA lose all activity with very minor changes to composition. These findings present a new method to increase the complexity of antifreeze protein mimetic materials, while retaining activity, and also to help understand the underlying mechanisms of action.

Facile production of nanoaggregates with tuneable morphologies from thermoresponsive P(DEGMA-co-HPMA)

RAFT-mediated emulsion polymerization of styrene and subsequent morphological transition produces nanoaggregates with tuneable morphologies.

Probing the Biomimetic Ice Nucleation Inhibition Activity of Poly(vinyl alcohol) and Comparison to Synthetic and Biological Polymers

Nature has evolved many elegant solutions to enable life to flourish at low temperatures by either allowing (tolerance) or preventing (avoidance) ice formation. These processes are typically controlled by ice nucleating proteins or antifreeze proteins, which act to either promote nucleation, prevent nucleation or inhibit ice growth depending on the specific need, respectively. These proteins can be expensive and their mechanisms of action are not understood, limiting their translation, especially into biomedical cryopreservation applications. Here well-defined poly(vinyl alcohol), synthesized by RAFT/MADIX polymerization, is investigated for its ice nucleation inhibition (INI) activity, in contrast to its established ice growth inhibitory properties and compared to other synthetic polymers. It is shown that ice nucleation inhibition activity of PVA has a strong molecular weight dependence; polymers with a degree of polymerization below 200 being an effective inhibitor at just 1 mg.mL(-1). Other synthetic and natural polymers, both with and without hydroxyl-functional side chains, showed negligible activity, highlighting the unique ice/water interacting properties of PVA. These findings both aid our understanding of ice nucleation but demonstrate the potential of engineering synthetic polymers as new biomimetics to control ice formation/growth processes.