Droplet-based light-sheet fluorescence microscopy for high-throughput sample preparation, 3-D imaging and quantitative analysis on a chip

Light-sheet microscopy enabled by a miniaturized plane illuminator

We present a implementation method of light-sheet microscopy utilizing a highly miniaturized device that produces light-sheet illumination while immersed in the sample container. Our miniaturized plane illuminator (MPI) internally equips a two-axis beam-scanning mechanism based on a magnetostatically driven optical fiber cantilever. A light sheet is produced by fast scanning of the focused beam in an axis while the illumination plane can move in the other axis for positioning and 3D imaging. Our MPI device is so compact in a 1.5 mm-thick needle form that it can be conveniently placed in the right vicinity of the imaging sample. Because the illumination is directly given in the sample-surrounding medium, a great deal of operational flexibility is obtained with an uncompromised beam quality. We could build a light-sheet microscopy system with a conventional inverted microscope frame by attaching our MPI upgrade kit as an add-on module. In this study, the optical and electromechanical characteristics of our MPI device were carefully investigated. As well, light-sheet microscopy imaging of various samples was performed to validate the practical power of our technique. We found our MPI can provide a low-cost and easy-to-use imaging mode, and make the light-sheet microscopy more available in various applications.

Recent Technologies on 2D and 3D Imaging Flow Cytometry

Imaging flow cytometry is a technology that performs microscopy image analysis of cells within flow cytometry and allows high-throughput, high-content cell analysis based on their intracellular molecular distribution and/or cellular morphology. While the technology has been available for a couple of decades, it has recently gained significant attention as technical limitations for higher throughput, sorting capability, and additional imaging dimensions have been overcome with various approaches. These evolutions have enabled imaging flow cytometry to offer a variety of solutions for life science and medicine that are not possible with conventional flow cytometry or microscopy-based screening. It is anticipated that the extent of applications will expand in the upcoming years as the technology becomes more accessible through dissemination. In this review, we will cover the technical advances that have led to this new generation of imaging flow cytometry, focusing on the advantages and limitations of each technique.

Multicolor iLIFE (m-iLIFE) volume cytometry for high-throughput imaging of multiple organelles

To be able to resolve multiple organelles at high throughput is an incredible achievement. This will have immediate implications in a range of fields ranging from fundamental cell biology to translational medicine. To realize such a high-throughput multicolor interrogation modality, we have developed a light-sheet based flow imaging system that is capable of visualizing multiple sub-cellular components with organelle-level resolution. This is possible due to the unique optical design that combines an illumination system comprising two collinear light sheets illuminating the flowing cells and a dedicated dual-color 4f-detection, enabling simultaneous recording of multiple organelles. The system PSF sections up to 4 parallel microfluidic channels through which cells are flowing, and multicolor images of cell cross-sections are recorded. The data is then computationally processed (filtered using ML algorithm, shift-corrected, and merged) and combined to reconstruct the 3D multicolor volume. System testing is conducted using multicolor fluorescent nano-beads (size ∼ 175 nm) and flow-based imaging parameters (PSF size, motion-blur, flow rate, frame rate, and number of cell-sections) are determined for quality imaging. Drug treatment studies were carried out for healthy and cancerous HeLa cells to check the performance of the proposed system. The cells were treated with a drug (Vincristine, which is known to promote mitochondrial fission in cells), and the same is compared with untreated control cells. The proposed multicolor iLIFE system could screen ∼ 800 cells/min (at a flow speed of 2490 μ m/s), and the drug treatment studies were carried out up to 24 h. Studies showed the disintegration of mitochondrial network and dysfunctional lysosomes and their accumulation at the cell membrane, which is a clear indication of cell apoptosis. Compared to control cells (untreated), the mortality is highest at a concentration of 500 nM post 12 h of drug treatment. With the capability of multiorganelle interrogation and organelle-level resolution, the multicolor iLIFE cytometry system is suitably placed to assist optical imaging and biomedical research.

A vascularized breast cancer spheroid platform for the ranked evaluation of tumor microenvironment-targeted drugs by light sheet fluorescence microscopy

Targeting the supportive tumor microenvironment (TME) is an approach of high interest in cancer drug development. However, assessing TME-targeted drug candidates presents a unique set of challenges. We develop a comprehensive screening platform that allows monitoring, quantifying, and ranking drug-induced effects in self-organizing, vascularized tumor spheroids (VTSs). The confrontation of four human-derived cell populations makes it possible to recreate and study complex changes in TME composition and cell-cell interaction. The platform is modular and adaptable for tumor entity or genetic manipulation. Treatment effects are recorded by light sheet fluorescence microscopy and translated by an advanced image analysis routine in processable multi-parametric datasets. The system proved to be robust, with strong interassay reliability. We demonstrate the platform's utility for evaluating TME-targeted antifibrotic and antiangiogenic drugs side-by-side. The platform's output enabled the differential evaluation of even closely related drug candidates according to projected therapeutic needs.

On-chip light sheet illumination for nanoparticle tracking in microfluidic channels

A simple and inexpensive method is presented to efficiently integrate light sheet illumination in a microfluidic chip for dark-field microscopic tracking and sizing of nanoparticles. The basic idea is to insert an optical fiber inside a polydimethylsiloxane (PDMS) elastomer microfluidic chip and use it as a cylindrical lens. The optical fiber is in this case no longer seen as only an optical waveguide but as a ready-made micro-optical component that is inexpensive and easy to source. Upon insertion, the optical fiber stretches the PDMS microchannel walls, which has two effects. The first effect is to tone down the intrinsic ripples in the PDMS that would otherwise create inhomogeneities in the light sheet illumination. The second effect is to remove any obliqueness of the channel wall and constrain it to be strictly perpendicular to the propagation of the illumination, avoiding the formation of a prismatic diopter. Through calculations, numerical simulations and measurements, we show that the optimal configuration consists in creating a slowly converging light sheet so that its axial thickness is almost uniform along the tracked area. The corresponding thickness was estimated at 12 μm, or 10 times the depth of field of the optical system. This leads to an at least six-fold increase in the signal-to-noise ratio compared to the case without the cylindrical lens. This original light-sheet configuration is used to track and size spherical gold nanoparticles with diameters of 80 nm and 50 nm.

On-Chip Photonic Detection Techniques for Non-Invasive In Situ Characterizations at the Microfluidic Scale

Microfluidics has emerged as a robust technology for diverse applications, ranging from bio-medical diagnostics to chemical analysis. Among the different characterization techniques that can be used to analyze samples at the microfluidic scale, the coupling of photonic detection techniques and on-chip configurations is particularly advantageous due to its non-invasive nature, which permits sensitive, real-time, high throughput, and rapid analyses, taking advantage of the microfluidic special environments and reduced sample volumes. Putting a special emphasis on integrated detection schemes, this review article explores the most relevant advances in the on-chip implementation of UV-vis, near-infrared, terahertz, and X-ray-based techniques for different characterizations, ranging from punctual spectroscopic or scattering-based measurements to different types of mapping/imaging. The principles of the techniques and their interest are discussed through their application to different systems.

Structured-light-sheet imaging in an integrated optofluidic platform

Heterogeneity investigation at the single-cell level reveals morphological and phenotypic characteristics in cell populations. In clinical research, heterogeneity has important implications in the correct detection and interpretation of prognostic markers and in the analysis of patient-derived material. Among single-cell analysis, imaging flow cytometry allows combining information retrieved by single cell images with the throughput of fluidic platforms. Nevertheless, these techniques might fail in a comprehensive heterogeneity evaluation because of limited image resolution and bidimensional analysis. Light sheet fluorescence microscopy opened new ways to study in 3D the complexity of cellular functionality in samples ranging from single-cells to micro-tissues, with remarkably fast acquisition and low photo-toxicity. In addition, structured illumination microscopy has been applied to single-cell studies enhancing the resolution of imaging beyond the conventional diffraction limit. The combination of these techniques in a microfluidic environment, which permits automatic sample delivery and translation, would allow exhaustive investigation of cellular heterogeneity with high throughput image acquisition at high resolution. Here we propose an integrated optofluidic platform capable of performing structured light sheet imaging flow cytometry (SLS-IFC). The system encompasses a multicolor directional coupler equipped with a thermo-optic phase shifter, cylindrical lenses and a microfluidic network to generate and shift a patterned light sheet within a microchannel. The absence of moving parts allows a stable alignment and an automated fluorescence signal acquisition during the sample flow. The platform enables 3D imaging of an entire cell in about 1 s with a resolution enhancement capable of revealing sub-cellular features and sub-diffraction limit details.

Recent progress in high-throughput droplet screening and sorting for bioanalysis

Owing to its ability to isolate single cells and perform high-throughput sorting, droplet sorting has been widely applied in several research fields. Compared with flow cytometry, droplet allows the encapsulation of single cells for cell secretion or lysate analysis. With the rapid development of this technology in the past decade, various droplet sorting devices with high throughput and accuracy have been developed. A droplet sorter with the highest sorting throughput of 30,000 droplets per second was developed in 2015. Since then, increased attention has been paid to expanding the possibilities of droplet sorting technology and strengthening its advantages over flow cytometry. This review aimed to summarize the recent progress in droplet sorting technology from the perspectives of device design, detection signal, actuating force, and applications. Technical details for improving droplet sorting through various approaches are introduced and discussed. Finally, we discuss the current limitations of droplet sorting for single-cell studies along with the existing gap between the laboratory and industry and provide our insights for future development of droplet sorters.

Large-scale high-throughput 3D culture, imaging, and analysis of cell spheroids using microchip-enhanced light-sheet microscopy

Light sheet microscopy combined with a microchip is an emerging tool in biomedical research that notably improves efficiency. However, microchip-enhanced light-sheet microscopy is limited by noticeable aberrations induced by the complex refractive indices in the chip. Herein, we report a droplet microchip that is specifically engineered to be capable of large-scale culture of 3D spheroids (over 600 samples per chip) and has a polymer index matched to water (difference <1%). When combined with a lab-built open-top light-sheet microscope, this microchip-enhanced microscopy technique allows 3D time-lapse imaging of the cultivated spheroids with ∼2.5-µm single-cell resolution and a high throughput of ∼120 spheroids per minute. This technique was validated by a comparative study on the proliferation and apoptosis rates of hundreds of spheroids with or without treatment with the apoptosis-inducing drug Staurosporine.

Portable light-sheet optofluidic microscopy for 3D fluorescence imaging flow cytometry

Imaging flow cytometry (IFC) combines conventional flow cytometry with optical microscopy, allowing for high-throughput, multi-parameter screening of single-cell specimens with morphological and spatial information. However, current 3D IFC systems are limited by instrumental complexity and incompatibility with available microfluidic devices or operations. Here, we report portable light-sheet optofluidic microscopy (PLSOM) for 3D fluorescence cytometric imaging. PLSOM exploits a compact, open-top light-sheet configuration compatible with commonly adopted microfluidic chips. The system offers a subcellular resolution (2-4 μm) in all three dimensions, high throughput (∼1000 cells per s), and portability (30 cm (l) × 10 cm (w) × 26 cm (h)). We demonstrated PLSOM for 3D IFC using various phantom and cell systems. The low-cost and custom-built architecture of PLSOM permits easy adaptability and dissemination for broad 3D flow cytometric investigations.

SPIM-Flow: An Integrated Light Sheet and Microfluidics Platform for Hydrodynamic Studies of Hydra

Selective plane illumination microscopy (SPIM), or light sheet microscopy, is a powerful imaging approach. However, access to and interfacing microscopes with microfluidics have remained challenging. Complex interfacing with microfluidics has limited the SPIM's utility for studying the hydrodynamics of freely moving multicellular organisms. We developed SPIM-Flow, an inexpensive light sheet platform that enables easy integration with microfluidics. We used SPIM-Flow to investigate the hydrodynamics of a freely moving Hydra polyp via particle tracking in millimeter-sized chambers. Initial experiments across multiple animals, feeding on a chip (Artemia franciscana nauplii used as food), and baseline behaviors (tentacle swaying, elongation, and bending) indicated the organisms' health inside the system. Fluidics were used to investigate Hydra's response to flow. The results suggested that the animals responded to an established flow by bending and swaying their tentacles in the flow direction. Finally, using SPIM-Flow in a proof-of-concept experiment, the shear stress required to detach an animal from a surface was demonstrated. Our results demonstrated SPIM-Flow's utility for investigating the hydrodynamics of freely moving animals.

A microfluidic Braille valve platform for on-demand production, combinatorial screening and sorting of chemically distinct droplets

Droplet microfluidics is a powerful tool for a variety of biological applications including single-cell genetics, antibody discovery and directed evolution. All these applications make use of genetic libraries, illustrating the difficulty of generating chemically distinct droplets for screening applications. This protocol describes our Braille Display valving platform for on-demand generation of droplets with different chemical contents (16 different reagents and combinations thereof), as well as sorting droplets with different chemical properties, on the basis of fluorescence signals. The Braille Display platform is compact, versatile and cost efficient (only ~US$1,000 on top of a standard droplet microfluidics setup). The procedure includes manufacturing of microfluidic chips, assembly of custom hardware, co-encapsulation of cells and drugs into droplets, fluorescence detection of readout signals and data analysis using shared, freely available LabVIEW and Python packages. As a first application, we demonstrate the complete workflow for screening cancer cell drug sensitivities toward 74 conditions. Furthermore, we describe here an assay enabling the normalization of the observed drug sensitivity to the number of cancer cells per droplet, which additionally increases the robustness of the system. As a second application, we also demonstrate the sorting of droplets according to enzymatic activity. The drug screening application can be completed within 2 d; droplet sorting takes ~1 d; and all preparatory steps for manufacturing molds, chips and setting up the Braille controller can be accomplished within 1 week.

Oviduct-mimicking microfluidic chips decreased the ROS concentration in the in vitro fertilized embryos of CD-1 mice

BACKGROUND

The process of the assisted reproductive technology (ART) cycle is extremely complicated, and various factors in each step may influence the final clinical outcomes; thus, optimizing culture conditions for embryos is crucial in the ART cycle, particularly when the traditional petri-dish method remains unchanged for decades. In the current study, we intend to culture embryos in a dynamic environment on chips to optimize the embryo culture conditions.

METHODS

Multilayer soft lithography technology was utilized to establish a microfluidics-based oviduct. Mouse primary oviduct epithelial cells were identified by immunofluorescence staining and then loaded into the chip to coculture with the embryos. The development potential parameters of embryos on chips with cells, on chips without cells, and in drops were compared, as well as reactive oxygen species (ROS) in embryos.

RESULTS

There were no obvious differences regarding the fertilization rate, 4-Cell embryo rate, cleavage rate, high-quality embryo rate, or blastocyst formation rate. However, the intracellular ROS levels in 4-Cell stage embryos on chips with cells were statistically significantly lower than those in drops (P < 0.001). This organ-on-chip device allowed the probability of mammalian embryo culture in a microfluidic-based manner.

CONCLUSIONS

Our findings demonstrated that this novel oviduct-on-chip model may optimize embryo culture conditions by reducing intracellular ROS levels, which may be a competent alternative to the existing stable embryo culture system.

Design of a versatile microfluidic device for imaging precision-cut-tissue slices

Precision-cut-tissues (PCTs), which preserve many aspects of a tissue's microenvironment, are typically imaged using conventional sample dishes and chambers. These can require large amounts of reagent and, when used for flow-through experiments, the shear forces applied on the tissues are often ill-defined. Their physical design also makes it difficult to image large volumes and repetitively image smaller regions of interest in the living slice. We report here on the design of a versatile microfluidic device capable of holding mouse or human pancreas PCTs for 3D fluorescence imaging using confocal and selective plane illumination microscopy (SPIM). Our design positions PCTs within a 5 × 5 mm × 140µm deep chamber fitted with 150µm tall channels to facilitate media exchange. Shear stress in the device is localized to small regions on the surface of the tissue and can be easily controlled. This design allows for media exchange at flowrates ∼10-fold lower than those required for conventional chambers. Finally, this design allows for imaging the same immunofluorescently labeled PCT with high resolution on a confocal and with large field of view on a SPIM, without adversely affecting image quality.

Sub-diffraction-limit light sheet enabled by a super-oscillatory lens with an enlarged field of view and depth of focus

Static light sheets are widely used in various super-resolution three-dimensional (3D) imaging applications. Here, a multifocal diffraction-free optimized design method is proposed for super-oscillatory lenses (SOLs) owning an enlarged field of view (FOV) to generate sub-diffraction-limit light sheets with reduced divergence. Various propagation lengths of sub-diffraction-limit thickness for light sheets can be obtained by adopting corresponding numbers of discrete foci and spacing between them. In particular, the propagation lengths of 150.4λ and 118.9λ are obtained by SOLs with an enlarged FOV of 150λ and 820λ, respectively, which show the longest depth of focus (DOF), as far as we know, and are the first to realize the combination of enlarged DOF and FOV for SOLs. We show a way of using binary-amplitude modulation to generate static light sheets with sub-diffraction-limit thickness and reduced divergence, which is simple, easy to integrate, and sidelobe-suppressed.

Microscopic Imaging Methods for Organ-on-a-Chip Platforms

Microscopic imaging is essential and the most popular method for in situ monitoring and evaluating the outcome of various organ-on-a-chip (OOC) platforms, including the number and morphology of mammalian cells, gene expression, protein secretions, etc. This review presents an overview of how various imaging methods can be used to image organ-on-a-chip platforms, including transillumination imaging (including brightfield, phase-contrast, and holographic optofluidic imaging), fluorescence imaging (including confocal fluorescence and light-sheet fluorescence imaging), and smartphone-based imaging (including microscope attachment-based, quantitative phase, and lens-free imaging). While various microscopic imaging methods have been demonstrated for conventional microfluidic devices, a relatively small number of microscopic imaging methods have been demonstrated for OOC platforms. Some methods have rarely been used to image OOCs. Specific requirements for imaging OOCs will be discussed in comparison to the conventional microfluidic devices and future directions will be introduced in this review.

A Review of Optical Imaging Technologies for Microfluidics

Microfluidics can precisely control and manipulate micro-scale fluids, and are also known as lab-on-a-chip or micro total analysis systems. Microfluidics have huge application potential in biology, chemistry, and medicine, among other fields. Coupled with a suitable detection system, the detection and analysis of small-volume and low-concentration samples can be completed. This paper reviews an optical imaging system combined with microfluidics, including bright-field microscopy, chemiluminescence imaging, spectrum-based microscopy imaging, and fluorescence-based microscopy imaging. At the end of the article, we summarize the advantages and disadvantages of each imaging technology.

Modular multimodal platform for classical and high throughput light sheet microscopy

Light-sheet fluorescence microscopy (LSFM) has become an important tool for biological and biomedical research. Although several illumination and detection strategies have been developed, the sample mounting still represents a cumbersome procedure as this is highly dependent on the type of sample and often this might be time consuming. This prevents the use of LSFM in other promising applications in which a fast and straightforward sample-mounting procedure and imaging are essential. These include the high-throughput research fields, e.g. in drug screenings and toxicology studies. Here we present a new imaging paradigm for LSFM, which exploits modularity to offer multimodal imaging and straightforward sample mounting strategy, enhancing the flexibility and throughput of the system. We describe its implementation in which the sample can be imaged either as in any classical configuration, as it flows through the light-sheet using a fluidic approach, or a combination of both. We also evaluate its ability to image a variety of samples, from zebrafish embryos and larvae to 3D complex cell cultures.

Development of a water refractive index-matched microneedle integrated into a light sheet microscopy system for continuous embryonic cell imaging

In this study, microneedle-integrated light sheet microscopy (LSM) was developed for trapping and continuously imaging embryos of Caenorhabditis elegans with subcellular resolution. To reduce aberrations when the light sheet was propagated into the device, a microneedle was fabricated using a transparent, water refractive index-matched polymer. It was proven that when the light sheet emerged from the water-immersed objective and penetrated through the microneedle with a circular surface, even with a non-perpendicular incident angle, fewer aberrations were found. An embryo was injected into and trapped at the tip of the microneedle, which was positioned at the interrogation window of the LSM apparatus with the image plane perpendicular to the light sheet, and this setup was used to sequentially acquire embryo images. By applying the light sheet, higher-resolution, higher-contrast images were obtained. The system also showed low photobleaching and low phototoxicity to embryos of C. elegans. Furthermore, three-dimensional embryo images with a whole field of view of the microneedle could be achieved by stitching together images and reconstructing sequential two-dimensional embryo images.

Microfluidics device for drug discovery, screening and delivery

Microfluidics and lab-on-chip are two progressive technologies widely used for drug discovery, screening and delivery. It has been designed in a way to act as a platform for sample preparations, culturing, incubation and screening through multi-channels. These devices require a small amount of reagent in about micro- to nanolitre volume. Microfluidics has the capacity to perform operations in a programmable manner and is easy to fine tune the size, shape and composition of drugs by changing flow rate and precise manipulations. Microfluidics platform comes with the advantage of mixing fluid in droplet reactors. Microfluidics is used in the field of chemistry, biomedical, biology and nanotechnology due to its high-throughput performance in various assays. It is potent enough to be used in microreactors for synthesis of particles and encapsulation of many biological entities for biological and drug delivery applications. Microfluidics therefore has the scope to be uplifted from basic to advanced diagnostic and therapeutic applications.

Light sheet based volume flow cytometry (VFC) for rapid volume reconstruction and parameter estimation on the go

Optical imaging is paramount for disease diagnosis and to access its progression over time. The proposed optical flow imaging (VFC/iLIFE) is a powerful technique that adds new capabilities (3D volume visualization, organelle-level resolution, and multi-organelle screening) to the existing system. Unlike state-of-the-art point-illumination-based biomedical imaging techniques, the sheet-based VFC technique is capable of single-shot sectional visualization, high throughput interrogation, real-time parameter estimation, and instant volume reconstruction with organelle-level resolution of live specimens. The specimen flow system was realized on a multichannel (Y-type) microfluidic chip that enables visualization of organelle distribution in several cells in-parallel at a relatively high flow-rate (2000 nl/min). The calibration of VFC system requires the study of point emitters (fluorescent beads) at physiologically relevant flow-rates (500-2000 nl/min) for determining flow-induced optical aberration in the system point spread function (PSF). Subsequently, the recorded raw images and volumes were computationally deconvolved with flow-variant PSF to reconstruct the cell volume. High throughput investigation of the mitochondrial network in HeLa cancer cell was carried out at sub-cellular resolution in real-time and critical parameters (mitochondria count and size distribution, morphology, entropy, and cell strain statistics) were determined on-the-go. These parameters determine the physiological state of cells, and the changes over-time, revealing the metastatic progression of diseases. Overall, the developed VFC system enables real-time monitoring of sub-cellular organelle organization at a high-throughput with high-content capacity.

Low-cost optofluidic add-on enables rapid selective plane illumination microscopy of C. elegans with a conventional wide-field microscope

SIGNIFICANCE

Selective plane illumination microscopy (SPIM) is an emerging fluorescent imaging technique suitable for noninvasive volumetric imaging of C. elegans. These promising microscopy systems, however, are scarce in academic and research institutions due to their high cost and technical complexities. Simple and low-cost solutions that enable conversion of commonplace wide-field microscopes to rapid SPIM platforms promote widespread adoption of SPIM by biologist for studying neuronal expressions of C. elegans.

AIM

We sought to develop a simple and low-cost optofluidic add-on device that enables rapid and immobilization-free volumetric SPIM imaging of C. elegans with conventional fluorescent microscopes.

APPROACH

A polydimethylsiloxane (PDMS)-based device with integrated optical and fluidic elements was developed as a low-cost and miniaturized SPIM add-on for the conventional wide-field microscope. The developed optofluidic chip contained an integrated PDMS cylindrical lens for on-chip generation of the light-sheet across a microchannel. Cross-sectional SPIM images of C. elegans were continuously acquired by the native objective of microscope as worms flowed in an L-shape microchannel and through the light sheet.

RESULTS

On-chip SPIM imaging of C. elegans strains demonstrated possibility of visualizing the entire neuronal system in few seconds at single-neuron resolution, with high contrast and without worm immobilization. Volumetric visualization of neuronal system from the acquired cross-sectional two-dimensional images is also demonstrated, enabling the standard microscope to acquire three-dimensional fluorescent images of C. elegans. The full-width at half-maximum width of the point spread function was measured as 1.1 and 2.4  μm in the lateral and axial directions, respectively.

CONCLUSION

The developed low-cost optofluidic device is capable of continuous SPIM imaging of C. elegans model organism with a conventional fluorescent microscope, at high speed, and with single neuron resolution.

Machine learning classification of origins and varieties of Tetrastigma hemsleyanum using a dual-mode microscopic hyperspectral imager

A dual-mode microscopic hyperspectral imager (DMHI) combined with a machine learning algorithm for the purpose of classifying origins and varieties of Tetrastigma hemsleyanum (T. hemsleyanum) was developed. By switching the illumination source, the DMHI can operate in reflection imaging and fluorescence detection modes. The DMHI system has excellent performance with spatial and spectral resolutions of 27.8 μm and 3 nm, respectively. To verify the capability of the DMHI system, a series of classification experiments of T. hemsleyanum were conducted. Captured hyperspectral datasets were analyzed using principal component analysis (PCA) for dimensional reduction, and a support vector machine (SVM) model was used for classification. In reflection microscopic hyperspectral imaging (RMHI) mode, the classification accuracies of T. hemsleyanum origins and varieties were 96.3% and 97.3%, respectively, while in fluorescence microscopic hyperspectral imaging (FMHI) mode, the classification accuracies were 97.3% and 100%, respectively. Combining datasets in dual mode, excellent predictions of origin and variety were realized by the trained model, both with a 97.5% accuracy on a newly measured test set. The results show that the DMHI system is capable of T. hemsleyanum origin and variety classification, and has the potential for non-invasive detection and rapid quality assessment of various kinds of medicinal herbs.

Deep-learning on-chip light-sheet microscopy enabling video-rate volumetric imaging of dynamic biological specimens

Volumetric imaging of dynamic signals in a large, moving, and light-scattering specimen is extremely challenging, owing to the requirement on high spatiotemporal resolution and difficulty in obtaining high-contrast signals. Here we report that through combining a microfluidic chip-enabled digital scanning light-sheet illumination strategy with deep-learning based image restoration, we can realize isotropic 3D imaging of a whole crawling Drosophila larva on an ordinary inverted microscope at a single-cell resolution and a high volumetric imaging rate up to 20 Hz. Enabled with high performances even unmet by current standard light-sheet fluorescence microscopes, we in toto record the neural activities during the forward and backward crawling of a 1st instar larva, and successfully correlate the calcium spiking of motor neurons with the locomotion patterns.

miniSPIM-A Miniaturized Light-Sheet Microscope

The miniSPIM is a miniaturized light-sheet microscope that enables imaging with optical sectioning on mobile camera devices such as smartphones and single-board computers. Applications of the miniSPIM include biosensing, field research, and education where maximum portability and robustness, low power consumption, and low cost are key. Here, it is shown how all of the components of a simple light-sheet microscope can be integrated within a footprint smaller than the average smartphone. Example applications include the quantification of the motion of microparticles and bacteria in fluids, the characterization of solvent polarity based on spectral shifts of the lipid probe Nile Red, and three-dimensional (3D) and time-lapse autofluorescence imaging of a live zebrafish embryo.

Optical Detection Methods for High-Throughput Fluorescent Droplet Microflow Cytometry

High-throughput microflow cytometry has become a focal point of research in recent years. In particular, droplet microflow cytometry (DMFC) enables the analysis of cells reacting to different stimuli in chemical isolation due to each droplet acting as an isolated microreactor. Furthermore, at high flow rates, the droplets allow massive parallelization, further increasing the throughput of droplets. However, this novel methodology poses unique challenges related to commonly used fluorometry and fluorescent microscopy techniques. We review the optical sensor technology and light sources applicable to DMFC, as well as analyze the challenges and advantages of each option, primarily focusing on electronics. An analysis of low-cost and/or sufficiently compact systems that can be incorporated into portable devices is also presented.

Automatic imaging of Drosophila embryos with light sheet fluorescence microscopy on chip

We present a microscope on chip for automated imaging of Drosophila embryos by light sheet fluorescence microscopy. This integrated device, constituted by both optical and microfluidic components, allows the automatic acquisition of a 3D stack of images for specimens diluted in a liquid suspension. The device has been fully optimized to address the challenges related to the specimens under investigation. Indeed, the thickness and the high ellipticity of Drosophila embryos can degrade the image quality. In this regard, optical and fluidic optimization has been carried out to implement dual-sided illumination and automatic sample orientation. In addition, we highlight the dual color investigation capabilities of this device, by processing two sample populations encoding different fluorescent proteins. This work was made possible by the versatility of the used fabrication technique, femtosecond laser micromachining, which allows straightforward fabrication of both optical and fluidic components in glass substrates.

Super-resolution optofluidic scanning microscopy

Optofluidics enables visualizing diverse anatomical and functional traits of single-cell specimens with new degrees of imaging capabilities. However, the current optofluidic microscopy systems suffer from either low resolution to reveal subcellular details or incompatibility with general microfluidic devices or operations. Here, we report optofluidic scanning microscopy (OSM) for super-resolution, live-cell imaging. The system exploits multi-focal excitation using the innate fluidic motion of the specimens, allowing for minimal instrumental complexity and full compatibility with various microfluidic configurations. The results present effective resolution doubling, optical sectioning and contrast enhancement. We anticipate the OSM system to offer a promising super-resolution optofluidic paradigm for miniaturization and different levels of integration at the chip scale.

Microfluidic channel integrated with a lattice lightsheet microscopic system for continuous cell imaging

In this study, a continuous cell-imaging system with subcellular resolution was developed by integrating a microfluidic platform with lattice lightsheet microscopy (LLSM). To reduce aberrations of the lightsheet propagating into the device, a microfluidic channel sealed with a water refractive index-matched thin film was fabricated. When the lightsheet emerged from the water-immersed objectives and penetrated through the water refractive-matched thin film into the microfluidic channel at an incident angle, less light scattering and fewer aberrations were found. Suspended cells flowed across the lattice lightsheet, and an imaging system with the image plane perpendicular to the lightsheet was used to sequentially acquire cell images. By applying a thinner lattice lightsheet, higher-resolution, higher-contrast images were obtained. Furthermore, three-dimensional cell images could be achieved by reconstructing sequential two-dimensional cell images.

Three-dimensional visualization and analysis of flowing droplets in microchannels using real-time quantitative phase microscopy

Recent years have witnessed the development of droplet-based microfluidics as a useful and effective tool for high-throughput analysis in biological, chemical and environmental sciences. Despite the flourishing development of droplet manipulation techniques, only a few methods allow for label-free and quantitative inspection of flowing droplets in microchannels in real-time and in three dimensions (3-D). In this work, we propose and demonstrate the application of a real-time quantitative phase microscopy (RT-QPM) technique for 3-D visualization of droplets, and also for full-field and label-free measurement of analyte concentration distribution in the droplets. The phase imaging system consists of a linear-CCD-based holographic microscopy configuration and an optofluidic phase-shifting element, which can be used for retrieving quantitative phase maps of flowing objects in the microchannels with a temporal resolution only limited to the frame rate of the CCD camera. To demonstrate the capabilities of the proposed imaging technique, we have experimentally validated the 3-D image reconstruction of the droplets generated in squeezing and dripping regimes and quantitatively investigated the volumetric and morphological variation of droplets as well as droplet parameters related to the depth direction under different flow conditions. We also demonstrated the feasibility of using this technique, as a refractive index sensor, for in-line quantitative measurement of carbamide analyte concentration within the flowing droplets.

Imaging microphysiological systems: a review

Microphysiological systems (MPS), often referred to as "organ-on-chips," are microfluidic-based in vitro models that aim to recapitulate the dynamic chemical and mechanical microenvironment of living organs. MPS promise to bridge the gap between in vitro and in vivo models and ultimately improve the translation from preclinical animal studies to clinical trials. However, despite the explosion of interest in this area in recent years, and the obvious rewards for such models that could improve R&D efficiency and reduce drug attrition in the clinic, the pharmaceutical industry has been slow to fully adopt this technology. The ability to extract robust, quantitative information from MPS at scale is a key requirement if these models are to impact drug discovery and the subsequent drug development process. Microscopy imaging remains a core technology that enables the capture of information at the single-cell level and with subcellular resolution. Furthermore, such imaging techniques can be automated, increasing throughput and enabling compound screening. In this review, we discuss a range of imaging techniques that have been applied to MPS of varying focus, such as organoids and organ-chip-type models. We outline the opportunities these technologies can bring in terms of understanding mechanistic biology, but also how they could be used in higher-throughput screens, widening the scope of their impact in drug discovery. We discuss the associated challenges of imaging these complex models and the steps required to enable full exploitation. Finally, we discuss the requirements for MPS, if they are to be applied at a scale necessary to support drug discovery projects.

Modified inverted selective plane illumination microscopy for sub-micrometer imaging resolution in polydimethylsiloxane soft lithography devices

Moldable, transparent polydimethylsiloxane (PDMS) elastomer microdevices enable a broad range of complex studies of three-dimensional cellular networks in their microenvironment in vitro. However, the uneven distribution of refractive index change, external to PDMS devices and internally in the sample chamber, creates a significant optical path difference (OPD) that distorts the light sheet beam and so restricts diffraction limited performance. We experimentally showed that an OPD of 120 μm results in the broadening of the lateral point spread function by over 4-fold. In this paper, we demonstrate steps to adapt a commercial inverted selective plane illumination microscope (iSPIM) and remove the OPD so as to achieve sub-micrometer imaging ranging from 0.6 ± 0.04 μm to 0.91 ± 0.03 μm of a fluorescence biological sample suspended in regular saline (RI ≈1.34) enclosed in 1.2 to 2 mm thick micromolded PDMS microdevices. We have proven that the removal of the OPD from the external PDMS layer by refractive index (RI) matching with a readily accessible, inexpensive sucrose solution is critical to achieve a >3-fold imaging resolution improvement. To monitor the RI matching process, a single-mode fiber (SMF) illuminator was integrated into the iSPIM. To remove the OPD inside the PDMS channel, we used an electrically tunable lens (ETL) that par-focuses the light sheet beam with the detection objective lens and so minimised axial distortions to attain sub-micrometer imaging resolution. We termed this new light sheet imaging protocol as modified inverted selective plane illumination microscopy (m-iSPIM). Using the high spatial-temporal 3D imaging of m-iSPIM, we experimentally captured single platelet (≈2 μm) recruitment to a platelet aggregate (22.5 μm × 22.5 μm × 6 μm) under flow at a 150 μm depth within a microfluidic channel. m-iSPIM paves the way for the application of light sheet imaging to a wide range of 3D biological models in microfluidic devices which recapitulate features of the physiological microenvironment and elucidate subcellular responses.

Applications of Light-Sheet Microscopy in Microdevices

Light-sheet fluorescence microscopy (LSFM) has been present in cell biology laboratories for quite some time, mainly as custom-made systems, with imaging applications ranging from single cells (in the micrometer scale) to small organisms (in the millimeter scale). Such microscopes distinguish themselves for having very low phototoxicity levels and high spatial and temporal resolution, properties that make them ideal for a large range of applications. These include the study of cellular dynamics, in particular cellular motion which is essential to processes such as tumor metastasis and tissue development. Experimental setups make extensive use of microdevices (bioMEMS) that provide better control over the substrate environment than traditional cell culture experiments. For example, to mimic in vivo conditions, experiment biochemical dynamics, and trap, move or count cells. Microdevices provide a higher degree of empirical complexity but, so far, most have been designed to be imaged through wide-field or confocal microscopes. Nonetheless, the properties of LSFM render it ideal for 3D characterization of active cells. When working with microdevices, confocal microscopy is more widespread than LSFM even though it suffers from higher phototoxicity and slower acquisition speeds. It is sometimes possible to illuminate with a light-sheet microdevices designed for confocal microscopes. However, these bioMEMS must be redesigned to exploit the full potential of LSFM and image more frequently on a wider scale phenomena such as motion, traction, differentiation, and diffusion of molecules. The use of microdevices for LSFM has extended beyond cell tracking studies into experiments regarding cytometry, spheroid cultures and lab-on-a-chip automation. Due to light-sheet microscopy being in its early stages, a setup of these characteristics demands some degree of optical expertise; and designing three-dimensional microdevices requires facilities, ingenuity, and experience in microfabrication. In this paper, we explore different approaches where light-sheet microscopy can achieve single-cell and subcellular resolution within microdevices, and provide a few pointers on how these experiments may be improved.

On-chip light-sheet fluorescence imaging flow cytometry at a high flow speed of 1 m/s

We present on-chip fluorescence imaging flow cytometry by light-sheet excitation on a mirror-embedded microfluidic chip. The method allows us to obtain microscopy-grade fluorescence images of cells flowing at a high speed of 1 m/s, which is comparable to the flow speed of conventional non-imaging flow cytometers. To implement the light-sheet excitation of flowing cells in a microchannel, we designed and fabricated a mirror-embedded PDMS-based microfluidic chip. To show its broad utility, we used the method to classify large populations of microalgal cells (Euglena gracilis) and human cancer cells (human adenocarcinoma cells). Our method holds promise for large-scale single-cell analysis.

Opto-acousto-fluidic microscopy for three-dimensional label-free detection of droplets and cells in microchannels

This paper reports a novel method, opto-acousto-fluidic microscopy, for label-free detection of droplets and cells in microfluidic networks. Leveraging the optoacoustic effect, the microscopic system possesses capabilities of visualizing flowing droplets, analyzing droplet contents, and detecting cell populations encapsulated in droplets via the sensing of acoustic waves induced by the intrinsic light-absorbance of matter.

Label-free light-sheet microfluidic cytometry for the automatic identification of senescent cells

Label-free microfluidic cytometry is of increasing interest for single cell analysis due to its advantages of high-throughput, miniaturization, as well as noninvasive detection. Here we develop a next generation label-free light-sheet microfluidic cytometer for single cell analysis by two-dimensional (2D) light scattering measurements. Our cytometer integrates light sheet illumination with a disposable hydrodynamic focusing unit, which can achieve 3D hydrodynamic focusing of a sample fluid to a diameter of 19 micrometer without microfabrication. This integration also improves the signal to noise ratio (SNR) for the acquisition of 2D light scattering patterns from label-free cells. Particle sizing with submicron resolution is achieved by our light-sheet flow cytometer, where Euclidean distance-based similarity measures are performed. Label-free, automatic classification of senescent and normal cells is achieved with a high accuracy rate by incorporating our light-sheet flow cytometry with support vector machine (SVM) algorithms. Our light-sheet microfluidic cytometry with a microfabrication-free hydrodynamic focusing unit may find wide applications for automatic and label-free clinical diagnosis.