Strategy to construct polyzwitterionic hydrogel coating with antifouling, drag-reducing and weak swelling performance

A skin-mimicking multifunctional hydrogel via hierarchical, reversible noncovalent interactions

Artificial skin is essential for bionic robotics, facilitating human skin-like functions such as sensation, communication, and protection. However, replicating a skin-matched all-in-one material with excellent mechanical properties, self-healing, adhesion, and multimodal sensing remains a challenge. Herein, we developed a multifunctional hydrogel by establishing a consolidated organic/metal bismuth ion architecture (COMBIA). Benefiting from hierarchical reversible noncovalent interactions, the COMBIA hydrogel exhibits an optimal combination of mechanical and functional properties, particularly its integrated mechanical properties, including unprecedented stretchability, fracture toughness, and resilience. Furthermore, these hydrogels demonstrate superior conductivity, optical transparency, freezing tolerance, adhesion capability, and spontaneous mechanical and electrical self-healing. These unified functions render our hydrogel exceptional properties such as shape adaptability, skin-like perception, and energy harvesting capabilities. To demonstrate its potential applications, an artificial skin using our COMBIA hydrogel was configured for stimulus signal recording, which, as a promising soft electronics platform, could be used for next-generation human-machine interfaces.

Waterborne Polyurethane-Stabilized Hydrogel Coating with Lubrication and Antibacterial Properties on Medical Catheters

Medical catheters require lubrication and antimicrobial properties to reduce complications, such as tissue trauma and bacterial infections. Coating hydrogel on the catheter surface is a promising strategy; however, it usually faces the challenge of weak interfacial adhesion, thus leading to coating delamination or fracture and failure. Here, a waterborne polyurethane (WPU)-triggered surface bonding strategy was presented to construct hydrogel coatings, which involved two key steps: (i) coating a sticky WPU layer on the catheter surface and (ii) dip-coating the WPU-coated catheter with a monomer solution consisting of quaternary ammonium chitosan (QCS), sulfobetaine methacrylate (SBMA), N-vinylpyrrolidone (NVP), and zinc sulfate heptahydrate (ZnSO4·7H2O) for growing the hydrogel layer by ultraviolet initiation. The hydrogel coating demonstrated tough adhesion performance to the catheter, and the interfacial bonding strength achieved 536 N/m. Meanwhile, the hydrogel coating had a variable thickness adjusted by QCS and possessed excellent hydrophilicity (WCA = 24.6°) and low surface friction properties (COF = 0.0357) based on the formation of the hydration layer. Furthermore, the introduction of ZnSO4·7H2O endowed the hydrogel coating with prominent antimicrobial properties against Escherichia coli (Gram-negative bacteria) and Bacillus subtilis (Gram-positive bacteria). This approach paves an avenue for fabricating hydrogel coatings with strong interface stability, controllable thickness, lubrication, and antibacterial properties.

A Robust Natural Rubber-Polyzwitterion Composite Hydrogel for Highly Enhanced Marine Anti-Biofouling

Polyzwitterion (PZW) hydrogel has excellent marine anti-biofouling performance, but it is difficult to effectively work for a long time in natural seawater due to its weak mechanical strength. In this study, a new natural rubber (NR)-PZW composite hydrogel has been reported for long-term anti-biofouling by simply dispersing NR latex into the poly(sulfobetaine methacrylate) (PSBMA) hydrogel network. First of all, owing to the PZW hydrogel network having an anti-polyelectrolyte effect, this NR-PZW hydrogel can provide outstanding anti-biofouling performance, including broad-spectrum anti-bacteria, anti-algae, and anti-protein properties in marine environments. Furthermore, it has a composited natural rubber nanoparticle with a hydrophilic negatively charged outer protein membrane, which can uniformly disperse in the hydrogel to significantly improve its mechanical properties. Therefore, this composited hydrogel can provide not only highly enhanced tensile strength (0.52 MPa) but also ultra-high breaking elongation (738%), which can effectually resist harsh seawater environments. As a result, the NR-PZW composite hydrogel can achieve excellent anti-biofouling performance for more than 3 months within a real marine environment. This work can provide an excellent, robust polyzwitterionic hydrogel for long-term marine anti-biofouling, which will also inspire new strategies for anti-biofouling materials.

Research Progress on Using Modified Hydrogel Coatings as Marine Antifouling Materials

The adhesion of marine organisms to marine facilities negatively impacts human productivity. This phenomenon, known as marine fouling, constitutes a serious issue in the marine equipment industry. It increases resistance for ships and their structures, which, in turn, raises fuel consumption and reduces ship speed. To date, numerous antifouling strategies have been researched to combat marine biofouling. However, a multitude of these resources face long-term usability issues due to various limitations, such as low adhesion quality, elevated costs, and inefficacy. Hydrogels, exhibiting properties akin to the slime layer on the skin of many aquatic creatures, possess a low frictional coefficient and a high rate of water absorbency and are extensively utilized in the marine antifouling field. This review discusses the recent progress regarding the application of hydrogels as an important marine antifouling material in recent years. It introduces the structure, properties, and classification of hydrogels; summarizes the current research status of improved hydrogels in detail; and analyzes the improvement in their antifouling properties and the prospects for their application in marine antifouling.

Fabrication of Poly(ionic liquid) Hydrogels Incorporating Liquid Metal Microgels for Enhanced Synergistic Antifouling Applications

Hydrogels are ideal for antifouling materials due to their high hydrophilicity and low adhesion properties. Herein, poly(ionic liquid) hydrogels integrated with zwitterionic copolymer-functionalized gallium-based liquid metal (PMPC-GLM) microgels were successfully prepared by a one-pot reaction. Poly(ionic liquid) hydrogels (IL-Gel) were obtained by chemical cross-linking the copolymer of ionic liquid, acrylic acid, and acrylamide, and the introduction of ionic liquid (IL) significantly increased the cross-linking density; this approach consequently enhanced the mechanical and antiswelling properties of the hydrogels. The swelling ratio of IL-Gel decreased eight times compared to the original hydrogels. PMPC-GLM microgels were prepared through grafting the zwitterionic polymer PMPC onto the GLM nanodroplet surface, which exhibited efficient antifouling performance attributed to the bactericidal effect of Ga3+ and the antibacterial effect of the zwitterionic polymer layer PMPC. Based on the synergistic effect of PMPC-GLM microgels and IL, the composite hydrogels PMPC-GLM@IL-Gel not only exhibited excellent mechanical and antiswelling properties but also showed outstanding antibacterial and antifouling properties. Consequently, PMPC-GLM@IL-Gel hydrogels achieved inhibition rates of over 90% against bacteria and more than 85% against microalgae.

Poly(dehydroalanine)-Based Hydrogels as Efficient Soft Matter Matrices for Light-Driven Catalysis

Soft matter integration of photosensitizers and catalysts provides promising solutions to developing sustainable materials for energy conversion. Particularly, hydrogels bring unique benefits, such as spatial control and 3D-accessibility of molecular units, as well as recyclability. Herein, the preparation of polyampholyte hydrogels based on poly(dehydroalanine) (PDha) is reported. Chemically crosslinked PDha with bis-epoxy poly(ethylene glycol) leads to a transparent, self-supporting hydrogel. Due to the ionizable groups on PDha, this 3D polymeric matrix can be anionic, cationic, or zwitterionic depending on the pH value, and its high density of dynamic charges has a potential for electrostatic attachment of charged molecules. The integration of the cationic molecular photosensitizer [Ru(bpy)3 ]2+ (bpy = 2,2'-bipyridine) is realized, which is a reversible process controlled by pH, leading to light harvesting hydrogels. They are further combined with either a thiomolybdate catalyst ([Mo3 S13 ]2- ) for hydrogen evolution reaction (HER) or a cobalt polyoxometalate catalyst (Co4 POM = [Co4 (H2 O)2 (PW9 O34 )2 ]10- ) for oxygen evolution reaction (OER). Under the optimized condition, the resulting hydrogels show catalytic activity in both cases upon visible light irradiation. In the case of OER, higher photosensitizer stability is observed compared to homogeneous systems, as the polymer environment seems to influence decomposition pathways.

Construction of a Soft Antifouling PAA/PSBMA Hydrogel Coating with High Toughness and Low Swelling through the Dynamic Coordination Bonding Provided by Al(OH)3 Nanoparticles

Marine biofouling, resulting from the adhesion of marine organisms to ship surfaces, has long been a significant issue in the maritime industry. In this paper, we focused on utilizing soft and hydrophilic hydrogels as a potential approach for antifouling (AF) coatings. Acrylic acid (AA) with a polyelectrolyte effect and N-(3-sulfopropyl)-N-(methacryloxyethyl)-N,N-dimethylammonium betaine (SBMA) with an antipolyelectrolyte effect were selected as monomers. By adjusting the monomer ratio, we were able to create hydrogel coatings that exhibited low swelling ratio in both fresh water and seawater. The Al(OH)3 nanoparticle, as a physical cross-linker, provided better mechanical properties (higher tensile strength and larger elongation at break) than the chemical cross-linker through the dynamic coordination bonds and plentiful hydrogen bonds. Additionally, we incorporated trehalose into the hydrogel, enabling the repair of the hydrogel network through covalent-like hydrogen bonding. The zwitterion compound SBMA endowed the hydrogel with excellent AF performance. It was found that the highest SBMA content did not lead to the best antibacterial performance, as bacterial adhesion quantity was also influenced by the charge of the hydrogel. The hydrogel with appropriate SBMA content being close to electrical neutrality exhibits the strongest zwitterionic property of PSBMA chains, resulting in the best antibacterial adhesion performance. Furthermore, the pronounced hydrophilicity of SBMA enhanced the lubrication of the hydrogel surface, thereby reducing the friction resistance when applied to the hull surface during ship navigation.

Durable hydrogel-based lubricated composite coating with remarkable underwater performances

HYPOTHESIS

Hydrogel coatings have received great attention in the field of such as medical devices, water treatment membranes, flexible electronics, and marine antifouling. However, when it comes to lubrication of hydrogel materials, though it has great potential applications in the field of industrial and medical drag reduction, some restrained properties are urgently needed to overcome for releasing the practical potential.

EXPERIMENTS

Durability of high lubrication was revealed from the sliding test during the long-term storage, as well as the long-distance sliding. Some variables which possibly affect the lubrication performance were examined to demonstrate that excellent lubricity of the coating would not be easily influenced by load, frequency, friction pair and temperature. The microstructure and mechanical characterization of the lubricative coating indicate that the resistance to harsh running conditions is premised on enough hydration extent and robustness. The formulae of Possion ratio and ball-on-disk contact stress which apply to soft matter were used for calculating contact stress values in tribology tests. Anti-swelling and bio-compatibility are also verified.

FINDINGS

This work found a route of achieving superior lubrication and coexisting with stability in lubrication, which can be used for drag reduction in medical devices and shipbuilding industry.

Self-healing and durable antifouling zwitterionic hydrogels based on functionalized liquid metal microgels

Hydrogels are a promising new class of antifouling materials. But their utility is constrained by low mechanical strength and unsatisfactory antifouling performance over the long term. Herein, we successfully prepared zwitterionic polymer PEIS cross-linked gallium-based liquid metal microgels-based (PEIS-Gel@PMPC-GLM) hydrogels via UV-curing and amidation reaction. The as-prepared hydrogels showed preferable mechanical properties and superior hydrophilicity to the original hydrogels. The PEIS-Gel@PMPC-GLM hydrogels could prevent the adhesion of more than 90 % of microalgae and nearly 100 % of bacteria in a short-term antifouling test. PEIS-Gel@PMPC-GLM hydrogels also performed exceptionally well in the high concentration antibacterial test and the long-term antifouling test (remove more than 90 % bacteria and 80 % microalgae). In addition to releasing a high concentration of gallium ions, as shown by the ICP-OES test, PEIS-Gel@PMPC-GLM hydrogels also exhibitedexcellent lubrication performance, as demonstrated by the friction test (coefficient of friction as low as 0.023). Therefore, the antifouling effect of gallium ions combined with the strong hydration ability of the surfaces endowed the hydrogels remarkable antibacterial and antifouling properties. As a result of the exposed gallium atoms inducing further crosslinking of residual vinyl monomer in hydrogels, PEIS-Gel@PMPC-GLM hydrogels revealed certain self-healing performance.

Nano-CeO2-Loaded Polyzwitterionic Double-Network High-Strength Hydrogel for Highly Enhanced Synergistic Marine Antifouling

Although many antibiofouling materials have been developed based on either bacterial-killing or antiadhesion effects, the integration of both the effects in one material remains challenging for achieving highly enhanced synergistic antibiofouling. In this study, we have explored a nano-CeO2-loaded double-network hydrogel by introducing CeO2 nanorods into a polyzwitterionic hydrogel via a simple one-pot method for achieving highly efficient antifouling. First, the CeO2 nanorods dispersed in the hydrogel, as an outstanding nanozyme, have highly efficient bacterial-killing performance. Second, the superhydrophilic polyzwitterionic hydrogel provides a dense hydrated layer on the surface and subsequently excellent broad-spectrum antiadhesion behavior. Most importantly, the bacterial killing and antiadhesion of this hydrogel can work synergistically to largely improve the marine-antifouling performance. Moreover, the double-network structure of this hydrogel, including the covalently cross-linked polyzwitterion hard network and the physically cross-linked poly(vinyl alcohol) soft network, can provide greatly improved mechanical properties (2.44 MPa of tensile strength reaches and 21.87 MPa of compressive strength). As a result, among the existing marine-antifouling hydrogels, the CeO2-loaded polyzwitterionic double-network hydrogel can achieve outstanding antifouling performance, which can sustain for over 6 months in a real marine environment. This work provides a promising marine-antifouling hydrogel, which will also inspire antifouling research of a new strategy and materials.

Salt Transport in Crosslinked Hydrogel Membranes Containing Zwitterionic Sulfobetaine Methacrylate and Hydrophobic Phenyl Acrylate

Produced water is a by-product of industrial operations, such as hydraulic fracturing for increased oil recovery, that causes environmental issues since it includes different metal ions (e.g., Li+, K+, Ni2+, Mg2+, etc.) that need to be extracted or collected before disposal. To remove these substances using either selective transport behavior or absorption-swing processes employing membrane-bound ligands, membrane separation procedures are promising unit operations. This study investigates the transport of a series of salts in crosslinked polymer membranes synthesized using a hydrophobic monomer (phenyl acrylate, PA), a zwitterionic hydrophilic monomer (sulfobetaine methacrylate, SBMA), and a crosslinker (methylenebisacrylamide, MBAA). Membranes are characterized according to their thermomechanical properties, where an increased SBMA content leads to decreased water uptake due to structural differences within the films and to more ionic interactions between the ammonium and sulfonate moieties, resulting in a decreased water volume fraction, and Young’s modulus increases with increasing MBAA or PA content. Permeabilities, solubilities, and diffusivities of membranes to LiCl, NaCl, KCl, CaCl2, MgCl2, and NiCl2 are determined by diffusion cell experiments, sorption-desorption experiments, and the solution-diffusion relationship, respectively. Permeability to these metal ions generally decreases with an increasing SBMA content or MBAA content due to the corresponding decreasing water volume fraction, and the permeabilities are in the order of K+ > Na+ > Li+ > Ni2+ > Ca2+ > Mg2+ presumably due to the differences in the hydration diameter.

A Biofouling Resistant Zwitterionic Polysulfone Membrane Prepared by a Dual-Bath Procedure

This study introduces a zwitterionic material to modify polysulfone (PSf) membranes formed by a dual bath procedure, in view of reducing their fouling propensity. The zwitterionic copolymer, derived from a random polymer of styrene and 4-vinylpyrridine and referred to as zP(S-r-4VP), was incorporated to the PSf solution without any supplementary pore-forming additive to study the effect of the sole copolymer on membrane-structuring, chemical, and arising properties. XPS and mapping FT-IR provided evidence of the modification. Macrovoids appeared and then disappeared as the copolymer content increased in the range 1-4 wt%. The copolymer has hydrophilic units and its addition increases the casting solution viscosity. Both effects play an opposite role on transfers, and so on the growth of macrovoids. Biofouling tests demonstrated the efficiency of the copolymer to mitigate biofouling with a reduction in bacterial and blood cell attachment by more than 85%. Filtration tests revealed that the permeability increased by a twofold factor, the flux recovery ratio was augmented from 40% to 63% after water/BSA cycles, and irreversible fouling was reduced by 1/3. Although improvements are needed, these zwitterionic PSf membranes could be used in biomedical applications where resistance to biofouling by cells is a requirement.

Simple synthesis route for fabrication of protective photo-crosslinked poly(zwitterionic) membranes for application in non-enzymatic glucose sensing

This work focuses on the fabrication of non-enzymatic glucose sensing materials based on laser-formed Au nanoparticles embedded in Ti-textured substrates. Those materials possess good catalytic activity toward glucose oxidation in 0.1 × phosphate buffered saline as well as resistance to some interferants, such as ascorbic acid, urea, and glycine. The electrodes are further coated with three different polymers, that is, Nafion, photo-crosslinked poly(zwitterions) based on sulfobetaine methacrylate, and a hybrid membrane consisting of both polymers. Both the optimal integrity of the material and its catalytic activity toward glucose oxidation were maintained by the hybrid membranes with a large excess of poly(zwitterions) (mass ratio 20:1). The chemical structures of the as-formed membranes are confirmed by Fourier transform infrared spectroscopy. Due to the zwitterionic nature of the coating, the electrodes are resistant to biofouling and maintain electrochemical activity toward glucose for 4 days. Moreover, due to the synergistic effect of both Nafion and poly(zwitterions), the interference from the two compounds, namely, from acetylsalicylic acid and acetaminophen, was diminished. Besides the presence of polymer membranes, the electrode possesses a sensitivity of 36.8 μA cm^-2  mM^-1 in the linear range of 0.4-12 mM, while the limit of detection was estimated to be 23 μM. Finally, the electrodes are stable, and their response is not altered even by 1,000 bending cycles.

Detection of Tumor DNA in Human Plasma with a Functional PLL-Based Surface Layer and Plasmonic Biosensing

Standard protocols for the analysis of circulating tumor DNA (ctDNA) include the isolation of DNA from the patient's plasma and its amplification and analysis in buffered solutions. The application of such protocols is hampered by several factors, including the complexity and time-constrained preanalytical procedures, risks for sample contamination, extended analysis time, and assay costs. A recently introduced nanoparticle-enhanced surface plasmon resonance imaging-based assay has been shown to simplify procedures for the direct detection of tumor DNA in the patient's plasma, greatly simplifying the cumbersome preanalytical phase. To further simplify the protocol, a new dual-functional low-fouling poly-l-lysine (PLL)-based surface layer has been introduced that is described herein. The new PLL-based layer includes a densely immobilized CEEEEE oligopeptide to create a charge-balanced system preventing the nonspecific adsorption of plasma components on the sensor surface. The layer also comprises sparsely attached peptide nucleic acid probes complementary to the sequence of circulating DNA, e.g., the analyte that has to be captured in the plasma from cancer patients. We thoroughly investigated the contribution of each component of the dual-functional polymer to the antifouling properties of the surface layer. The low-fouling property of the new surface layer allowed us to detect wild-type and KRAS p.G12D-mutated DNA in human plasma at the attomolar level (∼2.5 aM) and KRAS p.G13D-mutated tumor DNA in liquid biopsy from a cancer patient with almost no preanalytical treatment of the patient's plasma, no need to isolate DNA from plasma, and without PCR amplification of the target sequence.

Recent Advances in Antifouling Materials for Surface Plasmon Resonance Biosensing in Clinical Diagnostics and Food Safety

Strategies to develop antifouling surface coatings are crucial for surface plasmon resonance (SPR) sensing in many analytical application fields, such as detecting human disease biomarkers for clinical diagnostics and monitoring foodborne pathogens and toxins involved in food quality control. In this review, firstly, we provide a brief discussion with considerations about the importance of adopting appropriate antifouling materials for achieving excellent performances in biosensing for food safety and clinical diagnosis. Secondly, a non-exhaustive landscape of polymeric layers is given in the context of surface modification and the mechanism of fouling resistance. Finally, we present an overview of some selected developments in SPR sensing, emphasizing applications of antifouling materials and progress to overcome the challenges related to the detection of targets in complex matrices relevant for diagnosis and food biosensing.

Macroporous Polyzwitterionic Gels As Versatile Intermediates for the Fixation and Release of Anions

A new stable and functional polyzwitterion poly[1-(carboxymethyl)-4-methacrylamidopyridin-1-ium] was synthesized. The zwitterionic polymer shows its isoelectric point at a pH of 4.2, bidirectional pH responsiveness, and formation of dendritic fractal self-aggregated structures. Using this as a common intermediate, a simple, direct, and scalable single-step protocol was established to introduce various elementary anions like NO₃^-, HSO₄^-, H₂PO₄^-, F^-, Cl^-, Br^-, I^-, CH₃COO^-, and HCOO^- in their salt forms by reaction with the corresponding acids. FESEM studies on cross-linked polymeric hydrogels established the macroporous nature of these materials with their pore size in the range of 10-15 μm. Bidirectional swelling behavior was observed in these hydrogels from gel swelling kinetics and pH studies. Anion release studies in deionized water and buffer solutions showed ∼82 and ∼95% cumulative release for nitrate and phosphate anions, respectively, in 72 h. Our studies suggest that multifunctional polyzwitterionic gels are promising intermediates in the fixation and release of anions like nitrate and phosphate with potential applications in agriculture and healthcare.

Concentration Polarization Enabled Reactive Coating of Nanofiltration Membranes with Zwitterionic Hydrogel

In this study, the bottleneck challenge of membrane fouling is addressed via establishing a scalable concentration polarization (CP) enabled and surface-selective hydrogel coating using zwitterionic cross-linkable macromolecules as building blocks. First, a novel methacrylate-based copolymer with sulfobetain and methacrylate side groups was prepared in a simple three-step synthesis. Polymer gelation initiated by a redox initiator system (ammonium persulfate and tetramethylethylenediamine) for radical cross-linking was studied in bulk in order to identify minimum ("critical") concentrations to obtain a hydrogel. In situ reactive coating of a polyamide nanofiltration membrane was achieved via filtration of a mixture of the reactive compounds, utilizing CP to meet critical gelation conditions solely within the boundary layer. Because the feasibility was studied and demonstrated in dead-end filtration mode, the variable extent of CP was estimated in the frame of the film model, with an iterative calculation using experimental data as input. This allowed to discuss the influence of parameters such as solution composition or filtration rate on the actual polymer concentration and resulting hydrogel formation at the membrane surface. The zwitterionic hydrogel-coated membranes exhibited lower surface charge and higher flux during protein filtration, both compared to pristine membranes. Salt rejection was found to remain unchanged. Results further reveal that the hydrogel coating thickness and consequently the reduction in membrane permeance due to the coating can be tuned by variation of filtration time and polymer feed concentration, illustrating the novel modification method's promising potential for scale-up to real applications.

Bioinspired surfaces with special micro-structures and wettability for drag reduction: which surface design will be a better choice?

Human beings learn from creatures in nature and imitate them to solve challenges in daily life. Thus, the use of bioinspired surfaces for drag reduction has attracted extensive attention in recent years due to their important applications in many fields, such as pipeline systems, maritime transportation, and military weapons. Herein, we introduce some typical plants and animals with low drag surfaces that exist in nature, focusing on their drag reduction patterns. There are two main mechanisms to explain how surfaces reduce frictional drag, where one is to design a suitable surface geometry to change the flow distribution of surrounding fluid and the other is to introduce a low friction lubricating layer (usually air or non-toxic silicone oil) to partially or completely replace the solid-liquid interface. Hence, by mimicking these organisms, some surfaces have been fabricated to reduce frictional drag, including riblets, superhydrophobic surfaces, and slippery liquid-infused porous surfaces. With the increasing research on drag-reducing surfaces, the drag reduction rate of different types of surface designs has greatly improved in recent years. This review provides a holistic overview that facilitates direct comparisons between these surface types. To select an optimal surface for drag reduction in practical applications, the merits and deficiencies of different surface designs are analysed and compared. Finally, based on the current challenges, we present some future prospects for the application of bioinspired surfaces in drag reduction.

Microplastics in the environment: Interactions with microbes and chemical contaminants

Microplastics (MPs) are contaminants of emerging concern that have gained considerable attention during the last few decades due to their adverse impact on living organisms and the environment. Recent studies have shown their ubiquitous presence in the environment including the atmosphere, soil, and water. Though several reviews have focused on the occurrence of microplastics in different habitats, little attention has been paid to their interaction with biological and chemical pollutants in the environment. This review therefore presents the state of knowledge on the interaction of MPs with chemicals and microbes in different environments. The distribution of MPs, the association of toxic chemicals with MPs, microbial association with MPs and the microbial-induced fate of MPs in the environment are discussed. The biodegradation and bioaccumulation of MPs by and in microbes and its potential impact on the food chain are also reviewed. The mechanisms driving these interactions and how these, in turn, affect living organisms however are not yet fully understood and require further attention.

Bioinspired Hydrogel-Polymer Hybrids with a Tough and Antifatigue Interface via One-Step Polymerization

Hydrogel hybrids are one of the key factors in life activities and biomimetic science; however, their development and utilization are critically impeded by their inadequate adhesive strength and intricate process. In nature, barnacles can stick to a variety of solid surfaces firmly (adhesive strength above 300 kPa) using a hydrophobic interface, which inspires us to firmly combine hydrogels and polymers through introducing an adhesive layer. By spreading a hydrophobic liquid membrane directly, tough combination of a hydrogel and a polymer substrate could be achieved after one-step polymerization. The fracture energy of the hydrogel attached to the surface of polyvinyl chloride was up to 1200 J m^-2 and the tensile strength reached 1.21 MPa. Furthermore, the adhesion samples with this method exhibit an antifatigue performance, having withstood large bends and twists. It should be pointed out that this approach can also be applied to a variety of complicated surfaces. This work may expand the application range of hydrogels and provides an inspiration for hydrogel adhesion.

Facile one-pot synthesis of silver nanoparticles encapsulated in natural polymeric urushiol for marine antifouling

Silver nanoparticle-based coatings have been regarded as promising candidates for marine antifouling. However, current toxic fabrication methods also lead to environment risks. Nanoparticle agglomeration, poor compatibility with polymer, and rapid release of Ag⁺ result in short-term efficacy. In this study, a facile one-pot synthesis method of silver nanoparticles (AgNPs) encapsulated in polymeric urushiol (PUL) was developed. AgNPs were synthesized in situ by natural urushiol, serving as a reductant, dispersant and surfactant. Simultaneously, silver nitrate catalyzed the polymerization of urushiol into PUL. This in situ reduction method made AgNPs uniformly distributed in the polymer matrix. The binding between the AgNPs and the PUL resulted in the stable release of Ag⁺. Results showed the antibacterial rate of a 0.1% AgNPs coating is 100% in laboratory experiments. This environment-friendly coating showed good microbial inhibition performance with long-term (120 days) marine antifouling efficacy. This study shows the potential of preparing an eco-friendly coating with long-term marine antifouling ability.

PUL/AgNPs was developed by a one-step reaction, PUL/AgNPs coatings showed excellent antifouling performance in antimicrobial experiments and marine field tests.

Surface Plasmon Resonance for Biomarker Detection: Advances in Non-invasive Cancer Diagnosis

Biomarker-based cancer analysis has great potential to lead to a better understanding of disease at the molecular level and to improve early diagnosis and monitoring. Unlike conventional tissue biopsy, liquid biopsy allows the detection of a large variety of circulating biomarkers, such as microRNA (miRNA), exosomes, circulating tumor DNA (ctDNA), circulating tumor cells (CTCs), and proteins, in an easily accessible and minimally invasive way. In this review, we describe and evaluate the relevance and applicability of surface plasmon resonance (SPR) and localized SPR (LSPR)-based platforms for the detection of different classes of cancer biomarkers in liquid biopsy samples. Firstly, we critically discuss unsolved problems and issues in capturing and analyzing biomarkers. Secondly, we highlight current challenges which need to be resolved in applying SPR biosensors into clinical practice. Then, we mainly focus on applications of SPR-based platforms that process a patient sample aiming to detect and quantify biomarkers as a minimally invasive liquid biopsy tool for cancer patients appearing over the last 5 years. Finally, we describe the analytical performances of selected SPR biosensor assays and their significant advantages in terms of high sensitivity and specificity as well as accuracy and workflow simplicity.

Toward Antibiofouling PVDF Membranes

Membranes for biologically and biomedically related applications must be bioinert, that is, resist biofouling by proteins, human cells, bacteria, algae, etc. Hydrophobic materials such as polysulfone, polypropylene, or poly(vinylidene fluoride) (PVDF) are often chosen as matrix materials but their hydrophobicity make them prone to biofouling, which in turn limits their application in biological/biomedical fields. Here, we designed PVDF-based membranes by precipitation from the vapor phase and zwitterionized them in situ to reduce their propensity to biofouling. To achieve this goal, we used a copolymer containing phosphorylcholine groups. An in-depth physicochemical characterization revealed not only the controlled presence of the copolymer in the membrane but also that bicontinuous membranes could be formed. Membrane hydrophilicity was greatly improved, resulting in the mitigation of a variety of biofoulants: the attachment of Stenotrophomonas maltophilia, Streptococcus mutans, and platelets was reduced by 99.9, 99.9, and 98.9%, respectively. Besides, despite incubation in a plasma platelet-poor medium, rich in plasma proteins, a flux recovery ratio of 75% could be measured while it was only 40% with a hydrophilic commercial membrane of similar structure and physical properties. Similarly, the zwitterionic membrane severely mitigated biofouling by microalgae during their harvesting. All in all, the material/process combination presented in this work leads to antibiofouling porous membranes with a large span of potential biomedically and biologically related applications.