Advances in metal-organic framework coatings: versatile synthesis and broad applications

Self-catalyzed nitrogen-doped carbon nanotubes connected FeCo nanostructures for electrochemical sensitive detection of metol

Metol is a photographic developer that is extremely toxic to aquatic organisms due to its widespread use and improper handling in aquatic environments. Therefore, it is urgent to develop reliable strategies for its detection. Herein, we have designed an efficacious, expeditious and dependable electrochemical sensors for electrochemical determination of metol based on a self-catalyzed nitrogen-doped carbon nanotubes connected FeCo nanostructures (denoted FeCo@NC). The FeCo@NC formed from MOF-on-MOF hybrids of FeCo-MOF@ZIF-8. The porous structure formed by ZIF-8 after pyrolysis enhances diffusion kinetics, while the large number of carbon nanotubes produced by ZIF-8 has a beneficial impact on the field of electrocatalysis. The large electrically active surface area, rapid electron transfer rate and high electrocatalytic capacity exhibited by FeCo@NC were utilized to construct a highly sensitive sensor for the determination of metol. The limit of detection was found to be 0.024 μM, with a linear range of 0.08-450 μM. Furthermore, the developed sensor demonstrated excellent catalytic activity for the detection of metol, along with stability, reproducibility and selectivity. The sensor was employed for the analysis of water samples, yielding promising recovery results.

Modulated Multicomponent Reaction Pathway by Pore-Confinement Effect in MOFs for Highly Efficient Catalysis of Low-Concentration CO2

The conversion of flue gas CO2 into high-value chemicals via multicomponent reactions (MCRs) offers the advantages of atom economy, bond-formation efficiency and product complexity. However, because of the competition between reaction sequences and pathways among substrates, the efficient synthesize the desired product is a great challenge. Herein, a porous noble-metal-free framework (Cu-TCA) was synthesized, which can highly effectively catalyze the multicomponent conversion of CO2 by modulating reaction pathways. The pores with the size of 6.5 Å×6.5 Å in Cu-TCA selectively permit the entry of propargylamine and CO2 at simulated flue gas concentrations, At the same time, the larger-sized phosphine oxide is hindered outside the pores. Control experiments and NMR spectroscopy revealed that CO2 and propargylamine in the pores preferentially reacted to form oxazolidinones, which further reacted with phosphine oxide outside the pores to produce phosphorylated 2-oxazolidinones. Therefore, the reaction pathways and sequence of the substrates were controlled by the confinement effect of the pores in Cu-TCA. Density functional theory (DFT) calculations supported the coordination of Cu-TCA with the alkyne, significantly reducing the reaction barrier and promoting catalytic reaction. This study developed a new strategy for regulating the reaction pathways to promote MCRs via the confinement effect of MOF.

Phenyl-Substituted Thiaboranes─Linked 2D and 3D Aromatics as Noncovalent Organic Framework Materials

A series of 12-phenyl-closo-thiaboranes (12-(4-X-C6H4)-closo-1-SB11H10, where X = OMe (2), X = SMe (3), X = Ph (4), and X = NMe2 (5)) has been prepared. Except for 2, all compounds exhibit a chalcogen bond of thiaborane to the phenyl ring or the neighboring molecule as major supramolecular structural motif. 5, having the strongest (-12.47 kcal/mol) structure-making intermolecular interaction via noncovalent S···π(phenyl) chalcogen bond, was crystallized from different solvents in the form of various solvatopolymorphs. n-Hexane and diethyl ether can be removed from 5 easily upon the formation of a porous material with large cavities (up to 20.5% of the unit cell). This first stable and useful noncovalently bound organic framework material with an ultramicroporous structure exhibits a molecular sieve effect. The selective and repeatable adsorption of CO2 to the material crystallized from n-hexane was explained on the basis of cooperative and consecutive machine-like molecular interactions of quadrupolar CO2 molecule with B-H and amino groups inside rectangular cavities.

A Comprehensive Review of Anode Materials in Rechargeable Calcium-Ion Batteries

Recently, rechargeable calcium-ion batteries (CIB) have been investigated extensively due to their safety, environmental friendliness, abundant storage capacity, low cost, and their energy density and power density characteristics. This paper presents a systematic review of recent research advancements in anode materials, including alloys, organic materials, carbon-based materials, and transition metal oxide. First, the basic properties of CIBs and the challenges associated with anode materials are described. Then, the reaction mechanism and improvement strategies of anode materials for CIBs are highlighted. Finally, the advantages and disadvantages of the identified anode materials are summarized, and potential future research directions are highlighted.

Advancements in MOF-based resistive gas sensors: synthesis methods and applications for toxic gas detection

Gas sensors are essential tools for safeguarding public health and safety because they allow the detection of hazardous gases. To advance gas-sensing technologies, novel sensing materials with distinct properties are needed. Metal-organic frameworks (MOFs) hold great potential because of their extensive surface areas, high porosity, unique chemical properties, and capabilities for preconcentration and molecular sieving. These attributes make MOFs highly suitable for designing and creating innovative resistive gas sensors. This review article examines resistive gas sensors made from pristine, doped, decorated, and composite MOFs. The first part of the review focuses on the synthesis strategies of MOFs, while the second part discusses MOF-based resistive gas sensors that operate based on changes in resistance.

Affinity Capillary Electrophoresis Based on Receptor Quasi-Immobilization for the Study of Interactions Between Drugs and Serum Albumin

Herein, a receptor quasi-immobilization affinity capillary electrophoresis strategy was developed for the first time, using metal-organic frameworks with bio-macromolecular loading capacity and excellent separation performance, and for the efficient and accurate determination of the interactions between drugs and serum albumin. As a proof-of-concept demonstration, bovine serum albumin was used as the receptor, and zeolitic imidazole framework-8, a metal-organic framework with good biocompatibility and separation performance, was utilized as the chromatographic stationary phase as well as the substrate for the quasi-stationary phase of protein to investigate the interactions between bovine serum albumin and sulfonamides. Relying on the separation capability of the capillary chromatographic column and the extension of the migration time window by the quasi-immobilized receptor, the binding constants between three sulfonamide drugs and bovine serum albumin were successfully determined. The result was sulfadiazine > sulfadimethoxine > sulfaquinoxaline sodium, which was consistent with those obtained by fluorescence spectrometry and traditional affinity capillary electrophoresis. Furthermore, the binding constants of chiral drugs (omeprazole sodium and D, L-tryptophan) with human serum albumin were successfully determined by applying the capillary electrochromatographic column that had been rinsed with acetonitrile solution. In summary, the method not only enables the simultaneous evaluation of interaction between ligands and a protein within a complex system but also allows the investigation of interactions between different biomacromolecules and multicomponent systems through the substitution of quasi-immobilized receptors. Consequently, the present study provides a novel way to facilitate the rapid and accurate screening of active constituents within complex systems.

Cyborg microbe biohybrids with metal-organic coating layers: Strategies, functionalisation and potential applications

The integration of living microbes, specifically bacteria and fungi, with metal-organic nanocoatings has led to the recent development of cyborg microbe biohybrids, which show excellent adaptability and functionality for a wide range of potential applications in biotechnology and medicine. This review discusses the strategies, functionalisation, and applications of these biohybrids, which are categorised into two types of coatings: metal-organic frameworks (MOFs) and metal-phenolic networks (MPNs). Key advances in their synthetic approaches via in-situ and pre-synthesised coatings are crucially addressed, and yet the methodology details and specific advantages are highlighted. Despite the notable advancements, there are various limitations and challenges, such as determination of the long-term viability and stability of the biohybrids, insufficient work on their theranostic applications and essentially scaling-up difficulties for industrial and clinical translation. The latest advancements in the biohybrids and related technology have established a critical foundation for enhancing innovative studies through the strong interdisciplinary teamwork.

Addressing the challenges of infectious bone defects: a review of recent advances in bifunctional biomaterials

Infectious bone defects present a substantial clinical challenge due to the complex interplay between infection control and bone regeneration. These defects often result from trauma, autoimmune diseases, infections, or tumors, requiring a nuanced approach that simultaneously addresses infection and promotes tissue repair. Recent advances in tissue engineering and materials science, particularly in nanomaterials and nano-drug formulations, have led to the development of bifunctional biomaterials with combined osteogenic and antibacterial properties. These materials offer an alternative to traditional bone grafts, minimizing complications such as multiple surgeries, high antibiotic dosages, and lengthy recovery periods. This review examines the repair mechanisms in the infectious microenvironment and highlights various bifunctional biomaterials that foster both anti-infective and osteogenic processes. Emerging design strategies are also discussed to provide a forward-looking perspective on treating infectious bone defects with clinically significant outcomes.

Polysaccharides-Directed Biomineralization of Enzymes in Hierarchical Zeolite Imidazolate Frameworks for Electrochemical Detection of Phenols

Biomineralization of enzymes inside rigid metal-organic frameworks (MOFs) is appealing due to its biocompatibility and simplicity. However, this strategy has hitherto been limited to microporous MOFs, leading to low apparent enzymatic activity. In this study, polysaccharide sodium alginate is introduced during the biomineralization of enzymes in zeolitic imidazolate frameworks (ZIFs) to competitively coordinate with metal ions, which endows the encapsulated enzyme with a 7-fold higher activity than that in microporous ZIFs. Mechanism investigation showed that the introduction of alginate generates hierarchical porous structures and enhances the hydrophilicity, which contributes to the enhanced activity of the enzyme. Moreover, the porous ZIFs protect the embedded tyrosinase under detrimental conditions, which allows for the fast detection of phenol, with the limit of detection of 0.03 mM (S/N = 3). Engineering the enzyme with MOFs to enhance its activity and stability is anticipated to extend its application in biocatalysis and biosensors.

Developing porous electrocatalysts to minimize overpotential for the oxygen evolution reaction

The development of electrocatalysts for the oxygen evolution reaction (OER) is one of the most critical issues for improving the efficiency of electrochemical water-splitting, which can produce green hydrogen energy without CO2 emissions. This review outlines the advances in the precise design of inorganic- and organic-based porous electrocatalysts, which are designed by various strategies, to catalyze the OER in the electrolytic cycle for efficient water-splitting. For developing high-performance electrocatalysts with low overpotentials, it is important to design a chemical composition that optimizes binding energy for an intermediate in the OER and allows the easy access of reactants to active sites depending on the porosity of electrocatalysts. Porous structures give us the positive opportunity to increase the accessible surface of active sites and effective diffusion of targeting molecules, which is potentially one of the guidelines for developing active electrocatalysts. Further modification of the frameworks is also powerful for tailoring the function of pore surfaces and the environment of inner spaces. Designable organic molecules can also be embedded inside inorganic- and organic-based frameworks. According to chemical composition (inorganic and organic), nanostructure (crystalline and amorphous) and additional modification (metal doping and organic design) of porous electrocatalysts, the current status of resultant OER performance is surveyed with some problems that should be solved for improving the OER activity. The remarkable progress in OER electrocatalysts is also introduced for demonstrating the bifunctional hydrogen evolution reaction (HER) and for utilizing seawater.

Metal-organic frameworks (MOFs) of an MIL-101-supported iridium(III) complex as efficient photocatalysts in the three-component alkoxycyanomethylation of alkenes

Metal-organic frameworks (MOFs) exhibit intriguing physicochemical properties due to their manageable structure, abundant porosity, and uniform pore size, which provide ideal environments for photocatalysts to achieve highly efficient photocatalysis. In this work, fac-Ir(ppy)3 is directly anchored to MOFs of MIL-101 with different morphologies via Friedel-Crafts alkylation, affording various MIL-101-supported fac-Ir(ppy)3 without the molecular modification of fac-Ir(ppy)3. The as-fabricated photocatalysts possess high specific surface areas (785-962 m2 g-1), pore volumes (0.42-0.47 cc g-1) and uniform pore sizes (∼1.9 nm). The luminescence properties of anchored fac-Ir(ppy)3 including emission lifetime, band gap energy and quantum yield are enhanced by fabricating a hollow interior and double shell in the frameworks of MIL-101 through etching with acetic acid. In the visible light-induced three-component alkoxycyanomethylation of styrenes with bromoacetonitriles and methanol, comparable catalytic activities (66-90%) to homogeneous fac-Ir(ppy)3 (69-90%) are achieved at room temperature. Furthermore, owing to the good chemical and mechanical stability of the catalyst, no significant decrease in yield (<2%) is observed over ten catalytic cycles. Overall, this study provides a mass/charge transfer-enhanced platform for supported photocatalysts to achieve highly efficient synthesis of fine chemicals in the field of heterogeneous photocatalysis.

Emerging nanomaterials for novel wound dressings: From metallic nanoparticles and MXene nanosheets to metal-organic frameworks

The growing need for developing reliable and efficient wound dressings has led to recent progress in designing novel materials and formulations for different kinds of wounds caused by traumas, burns, surgeries, and diabetes. In cases of extreme urgency, accelerating wound recovery is of high importance to prevent persistent infection and biofilm formation. The application of nanotechnology in this domain resulted in the creation of distinct nanoplatforms for highly advanced wound-healing therapeutic approaches. Recently developed nanomaterials have been used as antibacterial agents or drug carriers to control wound infection. In the present review, the authors aim to review the recently published research on the effects of incorporating emerging nanomaterials into novel wound dressings and investigate their distinct roles in the wound healing process. It was determined that the metallic nanoparticles (NPs) exhibit antimicrobial and regenerative properties, metal oxide NPs regulate inflammation and promote tissue regeneration, MXene NPs enhance cell adhesion and proliferation, while metal-organic frameworks (MOFs) offer controlled drug delivery capabilities. Further research is required to fully understand the mechanisms and optimize the applications of these NPs in wound healing.

Optical detection strategies for Ni(II) ion using metal-organic chemosensors: from molecular design to environmental applications

Nickel is an important element utilized in various industrial/metallurgical processes, such as surgical and dental prostheses, Ni-Cd batteries, paint pigments, electroplating, ceramics, computer magnetic tapes, catalysis, and alloy manufacturing. However, its extensive use and associated waste production have led to increased nickel pollution in soils and water bodies, which adversely affects human health, animals and plants. This issue has prompted researchers to develop various optical probes, hereafter luminescent/colorimetric sensors, for the facile, sensitive and selective detection of nickel, particularly in biological and environmental contexts. In recent years, numerous functionalized chemosensors have been reported for imaging Ni2+, both in vivo and in vitro. In this context, metal-based receptors offer clear advantages over conventional organic sensors (viz., organic ligands, polymers, and membranes) in terms of cost, durability, stability, water solubility, recyclability, chemical flexibility and scope. This review highlights recent advancements in the design and fabrication of hybrid receptors (i.e., metal complexes and MOFs) for the specific detection of Ni2+ ions in complex environmental and biological mixtures.

Recent Progress in MOF-Aerogel Fabrication and Applications

Recent advancements in metal-organic frameworks (MOFs) underscore their significant potential in chemical and materials research, owing to their remarkable properties and diverse structures. Despite challenges like intrinsic brittleness, powdered crystalline nature, and limited stability impeding direct applications, MOF-based aerogels have shown superior performance in various areas, particularly in water treatment and contaminant removal. This review highlights the latest progress in MOF-based aerogels, with a focus on hybrid systems incorporating materials like graphene, carbon nanotube, silica, and cellulose in MOF aerogels, which enhance their functional properties. The manifold advantages of MOF-based aerogels in energy storage, adsorption, and catalysis are discussed, with an emphasizing on their improved stability, processability, and ease of handling. This review aims to unlock the potential of MOF-based aerogels and their real-world applications. Aerogels are expected to reshape the technological landscape of MOFs through enhanced stability, adaptability, and efficiency.

Metal Center-Tuned Photocatalytic Carbon Dioxide Reduction for Frameworks with the Tetraphenylethene-Imidazole Ligand

As heterogeneous photocatalysts that can effectively transform CO2 to CO, two MOFs with different metal centers, namely, [M(tipe)(H2O)2](ClO4)2·solvent (M = Ni named as Ni-MOF and M = Co referred to as Co-MOF), were synthesized by reactions of 1,1,2,2-tetrakis(4-(imidazole-1-yl)phenyl)ethene (tipe) with the corresponding metal perchlorate. Both Ni-MOF and Co-MOF have 3D structures, in which the metal centers have the same coordination environment with the N4O2 donor set. Driven by visible light, the CO production catalyzed by Co-MOF is 6734.1 μmol g-1 with 45.3% selectivity, and in contrast, Ni-MOF has 4601.3 μmol g-1 CO production with 97.6% selectivity in 5 h. Through photoelectrochemical characterization, DFT calculations, and in situ FT-IR measurements, the photocatalytic CO2 reduction process catalyzed by Ni-MOF and Co-MOF was investigated. The results show that the metal center of the MOF is crucial for photocatalytic CO2 reduction. This work offers an innovative approach for controlling the performance of photocatalytic CO2 reduction through tuning the metal centers of architectures.

Crystalline Metal-Organic Framework Coatings Engineered via Metal-Phenolic Network Interfaces

Crystalline metal-organic frameworks (MOFs) have garnered extensive attention owing to their highly ordered porous structure and physicochemical properties. However, their practical application often requires their integration with various substrates, which is challenging because of their weakly adhesive nature and the diversity of substrates that exhibit different properties. Herein, we report the use of amorphous metal-phenolic network coatings to facilitate the growth of crystalline MOF coatings on various particle and planar substrates. Crystalline MOFs with different metal ions and morphologies were successfully deposited on substrates (13 types) of varying sizes, shapes, and surface chemistries. Furthermore, the physicochemical properties of the coated crystalline MOFs (e.g., composition, thickness) could be tuned using different synthesis conditions. The engineered MOF-coated membranes demonstrated excellent liquid and gas separation performance, exhibiting a high H2 permeance of 63200 GPU and a H2/CH4 selectivity of 10.19, likely attributable to the thin nature of the coating (~180 nm). Considering the vast array of MOFs available (>90,000) and the diversity of substrates, this work is expected to pave the way for creating a wide range of MOF composites and coatings with potential applications in diverse fields.

Unveiling the scope and perspectives of MOF-derived materials for cutting-edge applications

Although synthesis and design of MOFs are crucial factors to the successful implementation of targeted applications, there is still lack of knowledge among researchers about the synthesis of MOFs and their derived composites for practical applications. For example, many researchers manipulate study results, and it has become quite difficult to quit this habit specifically among the young researchers Undoubtedly, MOFs have become an excellent class of compounds but there are many challenges associated with their improvement to attain diverse applications. It has been noted that MOF-derived materials have gained considerable interest owing to their unique chemical properties. These compounds have exhibited excellent potential in various sectors such as energy, catalysis, sensing and environmental applications. It is worth mentioning that most of the researchers rely on commercially available MOFs for use as precursor supports, but it is an unethical and wrong practice because it prevents the exploration of the hidden diversity of similar materials. The reported studies have significant gaps and flaws, they do not have enough details about the exact parameters used for the synthesis of MOFs and their derived materials. For example, many young researchers claim that MOF-based materials cannot be synthesized as per the reported instructions for large-scale implementation. In this regard, current article provides a comprehensive review of the most recent advancements in the design of MOF-derived materials. The methodologies and applications have been evaluated together with their advantages and drawbacks. Additionally, this review suggests important precautions and solutions to overcome the drawbacks associated with their preparation. Applications of MOF-derived materials in the fields of energy, catalysis, sensing and environment have been discussed. No doubt, these materials have become excellent class but there are still many challenges ahead to specify it for the targeted applications.

Applications of metal organic frameworks in dispersive micro solid phase extraction (D-μ-SPE)

Metal-organic frameworks (MOFs) are a fascinating family of crystalline porous materials made up of metal clusters and organic linkers. In comparison with other porous materials, MOFs have unique characteristics including high surface area, homogeneous open cavities, and permanent high porosity with variable shapes and sizes. For these reasons, MOFs have recently been explored as sorbents in sample preparation by solid-phase extraction (SPE). However, SPE requires large amounts of sorbents and suffers from limited contact surfaces with analytes, which compromises extraction recovery and efficiency. Dispersive SPE (D-SPE) overcomes these limitations by dispersing the sorbents into the sample, which in turn increases contact with the analytes. Miniaturization of the microextraction procedure, particularly the amount of sorbent reduces the amount consumed of the organic solvent and shorten the time required to attain the equilibrium state. This may explain the reported high efficiency and applicability of MOFs in dispersive micro SPE (D-µ-SPE). This method retains all the advantages of solid phase extraction while also being simpler, faster, cheaper, and, in some cases, more effective in comparison with D-SPE. Besides, D-µ-SPE requires smaller amounts of the sorbents which reduces the overall cost, and the amount of waste generated from the analytical process. In this review, we discuss the applications of MOFs in D-µ-SPE of various analytes including pharmaceuticals, pesticides, organic dyes from miscellaneous matrices including water samples, biological samples and food samples.

Gas Delivery Relevant to Human Health using Porous Materials

Gases are essential for various applications relevant to human health, including in medicine, biomedical imaging, and pharmaceutical synthesis. However, gases are significantly more challenging to safely handle than liquids and solids. Herein, we review the use of porous materials, such as metal-organic frameworks (MOFs), zeolites, and silicas, to adsorb medicinally relevant gases and facilitate their handling as solids. Specific topics include the use of MOFs and zeolites to deliver H2S for therapeutic applications, 129Xe for magnetic resonance imaging, O2 for the treatment of cancer and hypoxia, and various gases for use in organic synthesis. This Perspective aims to bring together the organic, inorganic, medicinal, and materials chemistry communities to inspire the design of next-generation porous materials for the storage and delivery of medicinally relevant gases.

Current and promising applications of MOF composites in the healing of diabetes wounds

Diabetes mellitus is an exponentially growing chronic metabolic disease identified by prolonged hyperglycemia that leads to a plethora of health problems. It is well established that the skin of diabetic patients is more prone to injury, and hence, wound healing is an utmost critical restorative process for injured skin and other tissues. Diabetes patients have problems with wound healing at all stages, which ultimately results in delays in the healing process. Therefore, it is vital to find new medications or techniques to hasten the healing of wounds. Metal-organic frameworks (MOFs), an assorted class of porous hybrid materials comprising metal ions coordinated to organic ligands, can display great potential in accelerating diabetic wound healing due to their good physicochemical properties. The release of metal ions during the degradation of MOFs can promote the differentiation of fibroblasts into myofibroblasts and subsequently angiogenesis. Secondly, similar to enzyme-like active substances, they can eliminate reactive oxygen species (ROS) overproduction (secondary to the bio-load of wound bacteria), which is conducive to accelerating diabetic wound healing. Subsequently, MOFs can support the slow release of drugs (molecular or gas therapeutics) in diabetic wounds and promote wound healing by regulating pathological signaling pathways in the wound microenvironment or inhibiting the expression of inflammatory factors. In addition, the combination of photodynamic and photothermal therapies using photo-stimulated porphyrin-based MOF nanosystems has brought up a new idea for treating complicated diabetic wound microenvironments. In this review, recent advances affecting diabetic wound healing, current means of rapid diabetic wound healing, and the limitations of traditional approaches are discussed. Further, the diabetic wound healing applications of MOFs have been discussed followed by the future challenges and directions of MOF materials in diabetic wound healing.

Thermally Annealed High-Aspect-Ratio ZIF-8 Nanoplates-Incorporated Mixed Matrix Membranes for Improved H2/CO2 Selectivity

The main challenge in the preparation of MOF-based mixed matrix membranes is to construct a good interface morphology to improve the gas separation performance and stability of the membranes. Herein, high-aspect-ratio ZIF-8 nanoplates for H2/CO2 separation membranes were synthesized by direct template conversion. The ZIF-8 nanoplates were prepared with the commercial Matrimid polymer to form MMMs by the flat scraping method. The homogeneous dispersion of high-aspect-ratio nanoplates in the membrane and the good compatibility between the filler and the matrix caused by the thermal annealing operation improve the gas separation performance and mechanical properties of MMMs. The H2/CO2 selectivity of MMMs loaded with 30 wt % ZIF-8 nanoplates increased to 10.3, and the H2 permeability was 330.1 Barrer. This synthesis method can be extended to prepare various ZIF nanoplates with elevated aspect ratios to obtain excellent performance fillers for gas separation of MMMs. In addition, the thermal annealing operation allows more efficient gas separation in polymer membranes and is a feasible way to design excellent and stable MMMs.

Electrochemical sensing mechanisms of neonicotinoid pesticides and recent progress in utilizing functional materials for electrochemical detection platforms

The excessive residue of neonicotinoid pesticides in the environment and food poses a severe threat to human health, necessitating the urgent development of a sensitive and efficient method for detecting trace amounts of these pesticides. Electrochemical sensors, characterized by their simplicity of operation, rapid response, low cost, strong selectivity, and high feasibility, have garnered significant attention for their immense potential in swiftly detecting trace target molecules. The detection capability of electrochemical sensors primarily relies on the catalytic activity of electrode materials towards the target analyte, efficient loading of biomolecular functionalities, and the effective conversion of interactions between the target analyte and its receptor into electrical signals. Electrode materials with superior performance play a crucial role in enhancing the detection capability of electrochemical sensors. With the continuous advancement of nanotechnology, particularly the widespread application of novel functional materials, there is paramount significance in broadening the applicability and expanding the detection range of pesticide sensors. This comprehensive review encapsulates the electrochemical detection mechanisms of neonicotinoid pesticides, providing detailed insights into the outstanding roles, advantages, and limitations of functional materials such as carbon-based materials, metal-organic framework materials, supramolecular materials, metal-based nanomaterials, as well as molecular imprinted materials, antibodies/antigens, and aptamers as molecular recognition elements in the construction of electrochemical sensors for neonicotinoid pesticides. Furthermore, prospects and challenges facing various electrochemical sensors based on functional materials for neonicotinoid pesticides are discussed, providing valuable insights for the future development and application of biosensors for simplified on-site detection of agricultural residues.

Recent Advances in Pristine Iron Triad Metal-Organic Framework Cathodes for Alkali Metal-Ion Batteries

Pristine iron triad metal-organic frameworks (MOFs), i.e., Fe-MOFs, Co-MOFs, Ni-MOFs, and heterometallic iron triad MOFs, are utilized as versatile and promising cathodes for alkali metal-ion batteries, owing to their distinctive structure characteristics, including modifiable and designable composition, multi-electron redox-active sites, exceptional porosity, and stable construction facilitating rapid ion diffusion. Notably, pristine iron triad MOFs cathodes have recently achieved significant milestones in electrochemical energy storage due to their exceptional electrochemical properties. Here, the recent advances in pristine iron triad MOFs cathodes for alkali metal-ion batteries are summarized. The redox reaction mechanisms and essential strategies to boost the electrochemical behaviors in associated electrochemical energy storage devices are also explored. Furthermore, insights into the future prospects related to pristine iron triad MOFs cathodes for lithium-ion, sodium-ion, and potassium-ion batteries are also delivered.

Novel Cu(II)-based metal-organic framework STAM-1 as a sulfur host for Li-S batteries

Due to the increasing demand for energy storage devices, the development of high-energy density batteries is very necessary. Lithium-sulfur (Li-S) batteries have gained wide interest due to their particularly high-energy density. However, even this type of battery still needs to be improved. Novel Cu(II)-based metal-organic framework STAM-1 was synthesized and applied as a composite cathode material as a sulfur host in the lithium-sulfur battery with the aim of regulating the redox kinetics of sulfur cathodes. Prepared STAM-1 was characterized by infrared spectroscopy at ambient temperature and after in-situ heating, elemental analysis, X-ray photoelectron spectroscopy and textural properties by nitrogen and carbon dioxide adsorption at - 196 and 0 °C, respectively. Results of the SEM showed that crystals of STAM-1 created a flake-like structure, the surface was uniform and porous enough for electrolyte and sulfur infiltration. Subsequently, STAM-1 was used as a sulfur carrier in the cathode construction of a Li-S battery. The charge/discharge measurements of the novel S/STAM-1/Super P/PVDF cathode demonstrated the initial discharge capacity of 452 mAh g-1 at 0.5 C and after 100 cycles of 430 mAh g-1, with Coulombic efficiency of 97% during the whole cycling procedure at 0.5 C. It was confirmed that novel Cu-based STAM-1 flakes could accelerate the conversion of sulfur species in the cathode material.

A novel electrochemical strategy based on MXene@rGO composite aerogel-doped UiO-66-NH2 for simultaneous detection of cadmium and lead in grain and water samples

Herein, a novel electrochemical sensing platform is designed for the simultaneous detection of Cd2+ and Pb2+, using MXene@rGO composite aerogel-doped UiO-66-NH2. The MXene@rGO composite aerogel not only serves as the support structure for UiO-66-NH2, but also improves the conductivity of the composite by accelerating the electron transport in the matrix. The amino group of UiO-66-NH2 offers binding sites for heavy-metal ions, and the existence of PhNH2/PhNH3+ in the composite promotes the redox processes of the metal ions to be detected on the electrode surface. The proposed sensing strategy can detect Cd2+ and Pb2+ independently and concurrently, with detection limits of 0.46 ppb and 0.40 ppb, respectively. Remarkably, when this strategy is used for simultaneous detection of Cd2+ and Pb2+ in grain and water samples, it exhibits excellent accuracy and reliability, aligning with the standard method (e.g., AAS and ICP-MS) demonstrating considerable promise in practical applications.

Highly sensitive ratiometric fluorescence detection of tetracycline residues in food samples based on Eu/Zr-MOF

The development of a simple, rapid, and sensitive method for monitoring antibiotic residues is crucial for maintaining food safety. Herein, a ratiometric fluorescence probe based on bimetallic organic framework (Eu/Zr-MOF) was developed for the detection of tetracycline (TC). The Eu/Zr-MOF was synthesized by the coordination of Eu3+ and Zr4+ with 2-APDC, which exhibited a grape-like cluster morphology and dual-emitting fluorescence at 430 nm/616 nm. Based on the internal filtering effect (IFE), significant fluorescence quenching was observed at 430 nm, whereas only slight changes occurred at 616 nm. The ratiometric sensing offered two broad linear ranges (0.5-8 μg/mL; 10-60 μg/mL) and a low detection limit (26.7 ng/mL). The proposed method was applied to the determination of TC in pork and water samples. Fluorescent sensors have the advantages of simple design, fast response, and high sensitivity, thus providing a promising means for evaluating the safety of food contaminated with TC.

Enhancing the water-resistance of MOF-199 film through incorporation of microporous organic networks for solid-phase microextraction of BTEX in aqueous environments with improved efficiency

BACKGROUND

The practical application of moisture sensitive metal organic frameworks (MOFs) in extraction technology faces challenges related to competitive adsorption and water stability. The target analytes cannot be effectively extracted under humid conditions due to the competitive moisture adsorption and/or framework structure collapse of MOFs. In this study, the microporous organic networks (MONs) were synthesized through Sonogashira coupling reaction to use for hydrophobic modification on the surface of MOF-199.

RESULTS

The MOF-199@MON as coating was deposited on stainless steel wires for solid-phase microextraction (SPME) of benzene series (BTEX) in aqueous environments. Under the optimal extraction conditions, the MOF-199@MON coated fiber for SPME coupled with GC-MS for the determination of BTEX gave the linear range of 0.5-500 μg L-1, the limit of detections (LODs, S/N = 3) of 0.01-0.04 μg L-1, the limit of quantifications (LOQs, S/N = 10) of 0.04-0.12 μg L-1, the enhancement factors of 3567-4878, and the intra-day, inter-day and fiber-to-fiber precisions (relative standard deviations, RSDs) of 1.0-9.8, 1.9-7.9 and 4.5-9.5 %, respectively. The developed method was successfully applied to the analysis of BTEX in water samples with the recoveries of 71.0 %-113 %.

SIGNIFICANCE

This work reveals the home-made SPME fibers have a long service life (the extraction efficiency of fiber decreased by only 7.26 %-13.14 % after 100 cycles). The potential of MON functionalized MOFs as effective adsorbents for the SPME of pollutants in the water environment.

Copper Single-Atom Catalysts-A Rising Star for Energy Conversion and Environmental Purification: Synthesis, Modification, and Advanced Applications

Future renewable energy supply and green, sustainable environmental development rely on various types of catalytic reactions. Copper single-atom catalysts (Cu SACs) are attractive due to their distinctive electronic structure (3d orbitals are not filled with valence electrons), high atomic utilization, and excellent catalytic performance and selectivity. Despite numerous optimization studies are conducted on Cu SACs in terms of energy conversion and environmental purification, the coupling among Cu atoms-support interactions, active sites, and catalytic performance remains unclear, and a systematic review of Cu SACs is lacking. To this end, this work summarizes the recent advances of Cu SACs. The synthesis strategies of Cu SACs, metal-support interactions between Cu single atoms and different supports, modification methods including modification for carriers, coordination environment regulating, site distance effect utilizing, and dual metal active center catalysts constructing, as well as their applications in energy conversion and environmental purification are emphatically introduced. Finally, the opportunities and challenges for the future Cu SACs development are discussed. This review aims to provide insight into Cu SACs and a reference for their optimal design and wide application.

Eu3+ doped ethylenediamine functionalized UiO-66 probe for fluorescence sensing of formaldehyde

The development of probes with selectivity and prompt detection of aldehydes molecules is of great importance for protecting human health and public security. Herein, a system based on ethylenediamine (EDA) functionalized and Eu3+-doped UiO-66, namely EDA-Eu3+@UiO-66, was designed to detect formaldehyde molecules. Based on the "antenna effect" of lanthanide elements, UiO-66 transfers the absorbed energy to Eu3+ ions and emits characteristic fluorescence belonging to Eu3+. By using the fluorescence peaks of UiO-66 and Eu3+ respectively, a ratiometric fluorescence sensing probe can be constructed. Formaldehyde molecules react with the -NH2 on the surface of EDA-Eu3+@UiO-66 through an aldehyde-amine condensation reaction and connect to the functionalized surface of UiO-66. Due to the absorption of excitation light energy by formaldehyde molecules, the energy transfer efficiency from UiO-66 to Eu3+ ions is reduced, resulting in the fluorescence quenching of EDA-Eu3+@UiO-66, thus achieving selective detection of formaldehyde. The fabricated sensing platform successfully detected residual formaldehyde in frozen shrimp tail samples. The system was also used to respond to formaldehyde vapor, and a significant fluorescence quenching effect was observed. This strategy provides a sensitive, selective, and reliable method for the visual sensing of formaldehyde.

MOFs for Ultrahigh Efficiency Pulsed Laser Micropropulsion

Conventional propellant materials, such as polymers and single metal elements, have long been investigated for their potential in pulsed laser micropropulsion (LMP) technology. However, achieving superior LMP efficiency through physical mixing of these materials remains a significant challenge. This study presents a paradigm shift by introducing porous crystalline polymers, known as metal-organic frameworks (MOFs), as novel propellants in pulsed LMP. MOFs are composed of metal cations and organic ligands that form ordered structures through coordination, eliminating the problem of local hot zones arising from uneven physical mixing encountered in LMP. In direct comparison to conventional polymers and single element targets, MOFs exhibit substantially higher LMP efficiency. By precisely tailoring the metal atom fraction within MOFs, an extraordinary ultrahigh efficiency of 51.15% is achieved in pulsed LMP, surpassing the performance of similar materials previously reported in the literature. This pioneering application of MOFs not only revolutionizes the field of LMP but also opens up new frontiers for MOF utilization in various energy applications.

Novel Hydrophobic Functionalized UiO-66 Series: Synthesis, Characterization, and Evaluation of Their Structural and Physical-Chemical Properties

A novel set of four functionalized hydrophobic UiO-66-NHR series were synthesized through postsynthetic procedures, utilizing various benzoyl chlorides and UiO-66-NH2 as starting materials. This synthesis method was carried out by employing p- (1) and o-toluoyl (2), as well as 2- (3) and 4-fluorobenzoyl (4) substituents. The analysis of the resulting compounds was performed using conventional spectroscopic methods such as FT-IR and 1H NMR to quantify the conversion rate into amide. Furthermore, SEM and XPS techniques were employed for morphological and surface analysis. Finally, the evaluation of the chemical stability and contact angle using the sessile drop method was performed to evaluate the technological potential of these compounds for application in aqueous and acidic media (such as selective separation of different metals and wastewater recovery).

Recent advances in metal-organic frameworks: Synthesis, application and toxicity

Metal-organic frameworks (MOFs) are a new class of crystalline porous hybrid materials with high porosity, large specific surface area and adjustable channel structure and biocompatibility, which are being investigated with increasing interest for energy storage and conversion, gas adsorption/separation, catalysis, sensing and biomedicine. However, the practical applications of MOFs make them release into the environment inevitable, posing a threat to humans and organisms. In this article, we cover advances in the currently available MOFs synthesis methods and the emerging applications of MOFs, especially in the biomedical field (therapeutic agents and bioimaging). Additionally, after evaluating the current status of main exposure routes and affecting factors in the field of MOFs-toxicity, the molecular mechanism is also clarified and identified. Knowledge gaps are identified from such a summarization and frontier development are explored for MOFs. Afterwards, we also present the limitations, challenges, and future perspectives in the study of the entire life cycle of MOFs. This review emphasizes the need for a more targeted discussion of the latest, widely used and effective versatile material class in order to exploit the full potential of high-performance and non-toxicity MOFs in the future.

Recent advances in surface-mounted metal-organic framework thin film coatings for biomaterials and medical applications: a review

Coatings of metal-organic frameworks (MOFs) have potential applications in surface modification for medical implants, tissue engineering, and drug delivery systems. Therefore, developing an applicable method for surface-mounted MOF engineering to fabricate protective coating for implant tissue engineering is a crucial issue. Besides, the coating process was desgined for drug infusion and effect opposing chemical and mechanical resistance. In the present review, we discuss the techniques of MOF coatings for medical application in both in vitro and in vivo in various systems such as in situ growth of MOFs, dip coating of MOFs, spin coating of MOFs, Layer-by-layer methods, spray coating of MOFs, gas phase deposition of MOFs, electrochemical deposition of MOFs. The current study investigates the modification in the implant surface to change the properties of the alloy surface by MOF to improve properties such as reduction of the biofilm adhesion, prevention of infection, improvement of drugs and ions rate release, and corrosion resistance. MOF coatings on the surface of alloys can be considered as an opportunity or a restriction. The presence of MOF coatings in the outer layer of alloys would significantly demonstrate the biological, chemical and mechanical effects. Additionally, the impact of MOF properties and specific interactions with the surface of alloys on the anti-microbial resistance, anti-corrosion, and self-healing of MOF coatings are reported. Thus, the importance of multifunctional methods to improve the adhesion of alloy surfaces, microbial and corrosion resistance and prospects are summarized.

Electrosynthesis of Metal-Organic Framework Films with Well-Defined Facets

The deposition of metal-organic framework (MOF) films with defined exposed facets is important to enhance the performance of these films for, for example, catalysis or separations. In this work, MOF films with specific exposed facets are electrodeposited anodically on various substrates (e. g. on copper-sputtered Si wafers, copper meshes, copper foams, and polypropylene membranes). The influence of the deposition parameters, including the pH of the solution, current density, concentration of linker, and solvent, on the exposed facets of the deposited MOFs was investigated. The results suggest that precise control over the supersaturation during anodic deposition is a possible strategy for synthesizing MOF crystals with well-defined exposed facets. This approach provides a powerful toolbox for various applications requiring crystal facet control of MOF films.

Decorating Channel Walls in Metal-Organic Frameworks with Crown Ethers for Efficient and Selective Separation of Radioactive Strontium(II)

Nuclear accidents and the improper disposal of nuclear wastes have led to serious environmental radioactive pollutions. The rational design of adsorbents for the highly efficient separation of strontium(II) is essential in treating nuclear waste and recovering radioactive strontium resources. Metal-organic frameworks (MOFs) are potential materials for the separation of aqueous metal ions owing to their designable structure and tunable functionality. Herein, a novel 3D MOF material MOF-18Cr6, in which 1D channels are formed using 18-crown-6-ether-containing ligands as channel walls, is fabricated for strontium(II) separation. In contrast to traditional MOFs designed by grafting functional groups in the framework pores, MOF-18Cr6 possesses regular 18-crown-6-ether cavities on the channel walls, which not only can transport and intake strontium(II) via the channels, but also prevent blockage of the channels after the binding of strontium(II). Consequently, the functional sites are fully utilized to achieve a high strontium(II) removal rate of 99.73 % in simulated nuclear wastewater. This study fabricates a highly promising adsorbent for the separation of aqueous radioactive strontium(II), and more importantly, can provide a new strategy for the rational design of high-performance MOF adsorbents for separating target substances from complex aqueous environments.

Current research trends of nanomedicines

Owing to the inherent shortcomings of traditional therapeutic drugs in terms of inadequate therapeutic efficacy and toxicity in clinical treatment, nanomedicine designs have received widespread attention with significantly improved efficacy and reduced non-target side effects. Nanomedicines hold tremendous theranostic potential for treating, monitoring, diagnosing, and controlling various diseases and are attracting an unfathomable amount of input of research resources. Against the backdrop of an exponentially growing number of publications, it is imperative to help the audience get a panorama image of the research activities in the field of nanomedicines. Herein, this review elaborates on the development trends of nanomedicines, emerging nanocarriers, in vivo fate and safety of nanomedicines, and their extensive applications. Moreover, the potential challenges and the obstacles hindering the clinical translation of nanomedicines are also discussed. The elaboration on various aspects of the research trends of nanomedicines may help enlighten the readers and set the route for future endeavors.

Ultrafast and Scalable Fabrication of Coordination Polymer Films on Network Substrates via Thermal Current-Induced Dewetting

Coordination polymers are among the most favored active materials by researchers due to their broad application prospects. However, most of them are usually difficult to directly process into applicable devices because of their unsatisfied processability. One process of great concern for researchers is the in situ preparation of the coordination polymer on the applicable substrate, especially for the favored network substrates with good mechanical properties and 3D porous structure, which could provide obvious convenience and facilitation in the application process. Herein, we present an ultrafast and scalable thermal current-induced dewetting strategy to obtain uniform coordination polymer film in situ on network substrates, which could enable unprecedented convenience to obtain directly usable coordination polymer composites such as practical catalytic electrodes with excellent electrocatalytic performance. The proposed thermal current-induced dewetting method provides a highly adaptable and efficient practical production approach to integrate coordination polymer materials with network substrates and also provides new inspiration for understanding and applying the dewetting process on complex 3D network substrates.

Three in One: Superoleophilic, Chemically and Mechanically Resistant ZIF-7 and ZIF-11 Percolation Networks for Selective Permeation of Oils and Chlorinated Solvents

Imbuing superwetting functions to organic-inorganic hybrid networks displaying chemical resistance, self-cleaning ability, and selective permeation of liquids has received increasing attention in recent years. Here we report superhydrophobic ZIF-7 and ZIF-11 on multilayer fluorinated graphene (FG) nanosheets with long-lasting water-repellent features. By exploring the solution processing of these chemically resistant dispersions, superoleophilic FG-ZIF-7 stainless steel mesh (FG-ZIF-7-SSM) and FG-ZIF-11 over cotton cloth (FG-ZIF-11-CC) possessing superior adhesion were fabricated. These permselective oil-liking prototypes were explored toward mesitylene and crude oil pickup from chemically harsh marine conditions such as seawater, acidic water, and alkaline water, with a separation efficiency of 96-94% up to 10 cycles. Furthermore, using an FG-ZIF-11-CC-wrapped glass pipet, upward diffusion of chloroform from sea, acidic, and alkaline water in 45 s was demonstrated with a separation efficacy of 94% up to 20 cycles. In addition to the chemical resistance and reusability, the mechanical stability of FG-ZIF-7-SSM and FG-ZIF-11-CC was investigated through folding, tape peeling, and dragging through sandpaper up to 250 cycles, showing no signs of changes in the hydrophobic responses. This research sheds light on the application of physiochemically resistant percolation coatings based on fluorinated graphene multilayers supporting ZIF-7 and ZIF-11 toward oil/water separation.

Fluorescent nano- and microparticles for sensing cellular microenvironment: past, present and future applications

The tumor microenvironment (TME) demonstrates distinct hallmarks, including acidosis, hypoxia, reactive oxygen species (ROS) generation, and altered ion fluxes, which are crucial targets for early cancer biomarker detection, tumor diagnosis, and therapeutic strategies. Various imaging and sensing techniques have been developed and employed in both research and clinical settings to visualize and monitor cellular and TME dynamics. Among these, ratiometric fluorescence-based sensors have emerged as powerful analytical tools, providing precise and sensitive insights into TME and enabling real-time detection and tracking of dynamic changes. In this comprehensive review, we discuss the latest advancements in ratiometric fluorescent probes designed for the optical mapping of pH, oxygen, ROS, ions, and biomarkers within the TME. We elucidate their structural designs and sensing mechanisms as well as their applications in in vitro and in vivo detection. Furthermore, we explore integrated sensing platforms that reveal the spatiotemporal behavior of complex tumor cultures, highlighting the potential of high-resolution imaging techniques combined with computational methods. This review aims to provide a solid foundation for understanding the current state of the art and the future potential of fluorescent nano- and microparticles in the field of cellular microenvironment sensing.

Sub-second ultrafast yet programmable wet-chemical synthesis

Wet-chemical synthesis via heating bulk solution is powerful to obtain nanomaterials. However, it still suffers from limited reaction rate, controllability, and massive consumption of energy/reactants, particularly for the synthesis on specific substrates. Herein, we present an innovative wet-interfacial Joule heating (WIJH) approach to synthesize various nanomaterials in a sub-second ultrafast, programmable, and energy/reactant-saving manner. In the WIJH, Joule heat generated by the graphene film (GF) is confined at the substrate-solution interface. Accompanied by instantaneous evaporation of the solvent, the temperature is steeply improved and the precursors are concentrated, thereby synergistically accelerating and controlling the nucleation and growth of nanomaterials on the substrate. WIJH leads to a record high crystallization rate of HKUST-1 (~1.97 μm s-1), an ultralow energy cost (9.55 × 10-6 kWh cm-2) and low precursor concentrations, which are up to 5 orders of magnitude faster, -6 and -2 orders of magnitude lower than traditional methods, respectively. Moreover, WIJH could handily customize the products' amount, size, and morphology via programming the electrified procedures. The as-prepared HKUST-1/GF enables the Joule-heating-controllable and low-energy-required capture and liberation towards CO2. This study opens up a new methodology towards the superefficient synthesis of nanomaterials and solvent-involved Joule heating.

Integration of Metal-Organic Frameworks and Metals: Synergy for Electrocatalysis

Electrocatalysis is a highly promising technology widely used in clean energy conversion. There is a continuing need to develop advanced electrocatalysts to catalyze the critical electrochemical reactions. Integrating metal active species, including various metal nanostructures (NSs) and atomically dispersed metal sites (ADMSs), into metal-organic frameworks (MOFs) leads to the formation of promising heterogeneous electrocatalysts that take advantage of both components. Among them, MOFs can provide support and protection for the active sites on guest metals, and the resulting host-guest interactions can synergistically enhance the electrocatalytic performance. In this review, three key concerns on MOF-metal heterogeneous electrocatalysts regarding the catalytic sites, conductivity, and catalytic stability are first presented. Then, rational integration strategies of MOFs and metals, including the integration of metal NSs via surface anchoring, space confining, and MOF coating, as well as the integration of ADMSs either with the metal nodes/linkers or within the pores of MOFs, along with their recent progress on synergistic cooperation for specific electrochemical reactions are summarized. Finally, current challenges and possible solutions in applying these increasingly concerned electrocatalysts are also provided.

Metal-organic frameworks functionalized biomaterials for promoting bone repair

Bone defects induced by bone trauma, tumors and osteoarthritis greatly affect the life quality and health of patients. The biomaterials with numerous advantages are becoming the most preferred options for repairing bone defects and treating orthopedic diseases. However, their repairing effects remains unsatisfactory, especially in bone defects suffering from tumor, inflammation, and/or bacterial infection. There are several strategies to functionalize biomaterials, but a more general and efficient method is essential for accomplishing the functionalization of biomaterials. Possessing high specific surface, high porosity, controlled degradability and variable composition, metal-organic frameworks (MOFs) materials are inherently advantageous for functionalizing biomaterials, with tremendous improvements having been achieved. This review summarizes recent progresses in MOFs functionalized biomaterials for promoting bone repair and therapeutic effects. In specific, by utilizing various properties of diverse MOFs materials, integrated MOFs functionalized biomaterials achieve enhanced bone regeneration, antibacterial, anti-inflammatory and anti-tumor functions. Finally, the summary and prospects of on the development of MOFs-functionalized biomaterials for promoting bone repair were discussed.

Metal-Organic Framework Coated Devices for Gas Sensing

The demand for monitoring chemical and physical information surrounding, air quality, and disease diagnosis has propelled the development of devices for gas sensing that are capable of translating external stimuli into detectable signals. Metal-organic frameworks (MOFs), possessing particular physiochemical properties with designability in topology, specific surface area, pore size and/or geometry, potential functionalization, and host-guest interactions, reveal excellent development promises for manufacturing a variety of MOF-coated sensing devices for multitudinous applications including gas sensing. The past years have witnessed tremendous progress on the preparation of MOF-coated gas sensors with superior sensing performance, especially high sensitivity and selectivity. Although limited reviews have summarized different transduction mechanisms and applications of MOF-coated sensors, reviews summarizing the latest progress of MOF-coated devices under different working principles would be a good complement. Herein, we summarize the latest advances of several classes of MOF-based devices for gas sensing, i.e., chemiresistive sensors, capacitors, field-effect transistors (FETs) or Kelvin probes (KPs), electrochemical, and quartz crystal microbalance (QCM)-based sensors. The surface chemistry and structural characteristics were carefully associated with the sensing behaviors of relevant MOF-coated sensors. Finally, challenges and future prospects for long-term development and potentially practical application of MOF-coated sensing devices are pointed out.

Near-infrared metal agents assisting precision medicine: from strategic design to bioimaging and therapeutic applications

Metal agents have made incredible strides in preclinical research and clinical applications in recent years, but their short emission/absorption wavelengths continue to be a barrier to their distribution, therapeutic action, visual tracking, and efficacy evaluation. Nowadays, the near-infrared window (NIR, 650-1700 nm) provides a more accurate imaging and treatment option. Thus, there has been ongoing research focusing on developing multifunctional NIR metal agents for imaging and therapy that have deeper tissue penetration. The design, characteristics, bioimaging, and therapy of NIR metal agents are covered in this overview of papers and reports published to date. To start with, we focus on describing the structure, design strategies, and photophysical properties of metal agents from the NIR-I (650-1000 nm) to NIR-II (1000-1700 nm) region, in order of molecular metal complexes (MMCs), metal-organic complexes (MOCs), and metal-organic frameworks (MOFs). Next, the biomedical applications brought by these superior photophysical and chemical properties for more accurate imaging and therapy are discussed. Finally, we explore the challenges and prospects of each type of NIR metal agent for future biomedical research and clinical translation.

Detection and discrimination of pathogenic bacteria with nanomaterials-based optical biosensors: A review

Pathogenic bacteria can pose a great threat to food safety and human health. It is therefore imperative to develop a rapid, portable, and sensitive determination and discrimination method for pathogenic bacteria. Over the past few years, various nanomaterials (NMs) have been employed as desirable nanoprobes because they possess extraordinary properties that can be used for optical signal enabled detection and identification of bacteria. By means of modification, NMs can, depending on different mechanisms, sense targets directly or indirectly, which then provides an essential support for the detection and differentiation of pathogenic bacteria. In this review, recent application of NMs-based optical biosensors for food safety bacterial detection and discrimination is performed, mainly in but not limited to noble metal NMs, fluorescent NMs, and point-of-care testing (POCT). This review also focuses on future trends in bacterial detection and discrimination, and machine learning in performing intelligent rapid detection and multiple accurate identification of bacteria.

Dual-targeting lanthanide-ICG-MOF nanoplatform for cancer Theranostics: NIR II luminescence imaging guided sentinel lymph nodes surgical navigation

Sentinel lymph node imaging is important for breast tumor staging and prediction of postoperative metastasis. However, clinical sentinel lymph node imaging has limitations such as low specificity, low contrast, and short retention time. The combination of bio-conjugates chemistry and luminescence technology may achieve the specific targeting effect. In this research, we designed a dual-targeting composite nanoprobe (∼50 nm) using a metal-organic framework (MOF) as carrier, loaded with lanthanide and ICG, and combined with hyaluronic acid and folic acid to detect metastatic lymph nodes. The coupled hyaluronic acid and folic acid can target to the tumor cells and dentritic cells with a dual-targeting effect. The FA-HA/ZIF-8@ICG nanoprobes can accumulate rapidly in sentinel lymph node with a stronger luminescence intensity (1.6 times) than that of normal popliteal lymph nodes in vivo, thus distinguish metastatic sentinel lymph node from normal effectively. Furthermore, due to the MOF carrier, the integrated lanthanide and near-infrared dye by transferring the absorbed excitation energy from ICG to Nd³⁺ can enhance the signal-to-background ratio of NIR II imaging and have long retention time in vivo imaging. Finally, the FA-HA/ICG@Ln@ZIF-8 nanoplatform increased the penetration depth and contrast of imaging, prolonged the retention time, and achieved the sentinel lymph nodes surgical resection. This study has important implications for lymph node imaging and surgical navigation.

Nanostructured biosensing platforms for the detection of food- and water-borne pathogenic Escherichia coli

Pathogenic bacterial infection is one of the principal causes affecting human health and ecosystems. The accurate identification of bacteria in food and water samples is of significant interests to maintain safety and health for humans. Culture-based tests are practically tedious and may produce false-positive results, while viable but non-culturable microorganisms (NCMs) cannot be retrieved. Thus, it requires fast, reliable, and low-cost detection strategies for on-field analysis and point-of-care (POC) monitoring. The standard detection methods such as nucleic acid analysis (RT-PCR) and enzyme-linked immunosorbent assays (ELISA) are still challenging in POC practice due to their time-consuming (several hours to days) and expensive laboratory operations. The optical (surface plasmon resonance (SPR), fluorescence, and surface-enhanced Raman scattering (SERS)) and electrochemical-based detection of microbes (early stage of infective diseases) have been considered as alternative routes in the emerging world of nanostructured biosensing since they can attain a faster and concurrent screening of several pathogens in real samples. Moreover, optical and electrochemical detection strategies are opening a new route for the ability of detecting pathogens through the integration of cellphones, which is well fitted for POC analysis. This review article covers the current state of sensitive mechanistic approaches for the screening and detection of Escherichia coli O157:H7 (E. coli) pathogens in food and water samples, which can be potentially applied in clinical and environmental monitoring.

CuBTC Metal-Organic Framework Decorated with FeBTC Nanoparticles with Enhance Water Stability for Environmental Remediation Applications

Metal-organic frameworks (MOFs) based on Cu-benzene tricarboxylate (CuBTC) are widely used for gas storage and removal applications. However, they readily lose their crystal structures under humid conditions, limiting their practical applications. This structural decomposition reduces the specific surface area, gas adsorption capability, and recyclability of CuBTC considerably. In this study, a stable MOF against water exposure was designed based on FeBTC nanoparticle-covered CuBTC (FeCuBTC). A simple one-pot solvothermal process that enables the epitaxial growth of FeBTC on the CuBTC surface was proposed. Structural and morphological analyses after water exposure revealed that the water stability of FeCuBTC was better than that of CuBTC, which completely lost its crystallinity. This observed improvement in the water stability of the synthesized MOF proved to be beneficial for the adsorption of formaldehyde under humid conditions. The proposed strategy herein is simple yet highly effective in the design of hetero-bimetallic MOFs with considerably improved water resistance and extended applicability for environmental remediation processes.

Switchable aptamer-fueled colorimetric sensing toward agricultural fipronil exposure sensitized with affiliative metal-organic framework

Persistent usage of pesticides in agriculture has posed serious damage to overall ecosystem and human health, and thereby it is imperative to develop sensitive and efficient tools to evaluate residual pesticides in food and environmental setting. Herein, we reported a switchable colorimetric probe toward fipronil residue sensitized with aptamer-fueled catalytic activity of affiliative ZIF-8. Innovatively, it was found that the attached aptamer preferred to adsorb 3,3',5,5'-tetramethylbenzidine (TMB) rather than 2,2-azinobis (3-ethylbenzothiazo-line-6-sulfonic acid) (ABTS), greatly promoting catalytic oxidation of ZIF-8 toward TMB for further improving sensitivity. Aiding with smartphone-based image acquisition, fipronil-responsive discoloration degree was converted into the ratio of green and blue (G/B) with limit of detection as low as 0.036 μM (0.016 μg·g^-1). Moreover, it allowed for fipronil analysis in water, soil and vegetable samples with good recovery between 87 % and 110 %, verifying extension application prospect of the aptamer-fueled colorimetry for on-field pesticide evaluation in food safety supervision.