Rational Dual-Atom Design to Boost Oxygen Reduction Reaction on Iron-Based Electrocatalysts

The oxygen reduction reaction (ORR) is critical for energy conversion technologies like fuel cells and metal-air batteries. However, advancing efficient and stable ORR catalysts remains a significant challenge. Iron-based single-atom catalysts (Fe SACs) have emerged as promising alternatives to precious metals. However, their catalytic performance and stability remain constrained. Introducing a second metal (M) to construct Fe─M dual-atom catalysts (Fe─M DACs) is an effective strategy to enhance the performance of Fe SACs. This review provides a comprehensive overview of the recent advancements in Fe-based DACs for ORR. It begins by examining the structural advantages of Fe─M DACs from the perspectives of electronic structure and reaction pathways. Next, the precise synthetic strategies for DACs are discussed, and the structure-performance relationships are explored, highlighting the role of the second metal in improving catalytic activity and stability. The review also covers in situ characterization techniques for real-time observation of catalytic dynamics and reaction intermediates. Finally, future directions for Fe─M DACs are proposed, emphasizing the integration of advanced experimental strategies with theoretical simulations as well as artificial intelligence/machine learning to design highly active and stable ORR catalysts, aiming to expand the application of Fe─M DACs in energy conversion and storage technologies.

Hydrophilic Single-Atom Interface Empowered Pure Formic Acid Fuel Cells

Single-atom catalysts (SACs), offering high mass activity and enhanced resistance to poisoning, are regarded as superior alternatives to traditional Pt/Pd nanocatalysts for direct formic acid fuel cells (DFAFCs). However, failure toward operation in concentrated formic acid (FA), which is critical for portable electronics, challenges their antipoisoning advantage and highlights a missing part in the understanding of the reaction. We herein demonstrate that the interfacial hydrophilicity of SACs is pivotal for high-performance DFAFCs, enabling, for the first time, stable operation with pure FA (>99%). By incorporating transition metal single atoms (Co, Fe, Ni, Ru) into Ir/NC catalysts, we engineered highly hydrophilic interfaces, as validated by molecular dynamics simulations and experimental studies. The optimized IrCo/NC anode exhibited a mass activity 342 times higher than that of nanoparticle-based catalysts and represented as the first SAC to achieve a higher peak power density (107.7 mW cm-2). A new reaction mechanism is revealed, where CO acts as a reactive intermediate rather than a poison. Further, in situ spectroscopy and isotope kinetic analyses identified water intermediate involvement in the rate-determining step, underscoring the critical role of hydrophilic interface engineering in DFAFC.

A Review on Electrochemical Water Splitting Electrocatalysts for Green H2 Production: Unveiling the Fundamentals and Recent Advances

Green H2 production via electrochemical water splitting has emerged as a pivotal solution for achieving a sustainable energy future. This Review delves into the fundamentals of water splitting, focusing on the O2 evolution reaction (OER) and H2 evolution reaction (HER), and focuses on the critical role of electrocatalysts in these processes. Precious metals such as paltinum and iridium remain the benchmarks for catalytic performance; however, their scarcity and high cost necessitate the development of alternative materials. Recent advances in Earth-abundant catalysts, including transition-metal oxides, carbides, nitrides, and sulfides, have shown promise in balancing activity, durability, and affordability. The integration of nanostructuring techniques and computational modeling has enabled the design of catalysts with enhanced active site exposure and electronic properties. Furthermore, the Review highlights challenges such as material degradation, high overpotentials, and gas crossover, along with potential solutions like protective coatings, bifunctional catalysts, and advanced electrolyzer designs. Future prospects emphasize the role of artificial intelligence, hybrid systems, and sustainable manufacturing in accelerating progress. This comprehensive review underscores the significance of bridging fundamental research with technological innovations to scale up green hydrogen production, addressing energy demands while mitigating environmental impacts.

A salen-based dinuclear cobalt(ii) polymer with direct and indirect synergy for electrocatalytic hydrogen evolution

Optimizing the spatial arrangement and geometric configuration of dinuclear metal sites within catalysts to leverage the dinuclear metal synergistic catalysis (DMSC) effect is a promising strategy for enhancing catalytic performance. In this work, we report a salen-based dinuclear cobalt covalent organic polymer (Co2-COP) that exhibits both direct and indirect DMSC synergistic effects, significantly improving catalytic efficiency for the electrocatalytic alkaline hydrogen evolution reaction (HER). Notably, one of the Co atoms in this structural unit features an OH- anion. The OH- anion facilitates both H2O adsorption through p-p orbital overlapping interaction and the subsequent OH* intermediate removal by pre-attracting cations. As a result, Co2-COP exhibits superior HER activity that surpasses its single-atom counterpart by a factor of 36. Control experiments and theoretical calculations revealed that the enhanced catalytic efficiency of Co2-COP is attributed to both the direct DMSC effect between two CoII ions, and the indirect DMSC involving the OH- anion and alkali cations. This synergistic interaction significantly facilitates water activation and accelerates the removal of the OH* intermediate, all of which are intricately linked to the unique dinuclear structure of the material.

Two-dimensional ZIF-L derived dual Fe/FeNx sites for synergistic efficient oxygen reduction in alkaline and acid media

Fe-N-C catalysts have emerged as the most promising alternatives to commercial Pt/C catalysts for oxygen reduction reaction (ORR) due to their cost-effectiveness and favorable activity. Herein, a dual-site Fe/FeNx-NC catalyst was synthesized via a green, in situ doping strategy using two-dimensional Fe-doped ZIF-L as a nitrogen-rich precursor. The catalyst integrated Fe nanoparticles (NPs) and FeNx sites anchored on carbon nanotubes, intertwined with nitrogen-doped porous carbon nanosheets, achieving a high active site density and graphitisation. Electrochemical tests revealed that the optimized Fe/FeNx-NC-1 exhibited significant ORR activity, with a half-wave potential of 0.92 V and 0.80 V for alkaline and acidic medium, respectively. Zn-air batteries employing Fe/FeNx-NC-1 delivered a peak power density of 168 mW·cm-2 and a specific capacity of 790 mAh·g-1, outperforming those of Pt-based catalysts. Density functional theory calculations demonstrated a reduced free energy barrier for the rate-determining step (0.48 eV) compared to single-site Fe-N4 models (0.79 eV). The synergy between Fe NPs and FeNx optimized ORR intermediate adsorption and facilitated charge/mass transfer. This study offers valuable insights for the development of advanced energy conversion systems.

Tuning the Acid Hardness Nature of Cu Catalyst for Selective Nitrate-to-Ammonia Electroreduction

Electrocatalytic nitrate reduction reaction (NO3RR) in alkaline electrolyte presents a sustainable pathway for energy storage and green ammonia (NH3) synthesis. However, it remains challenging to obtain high activity and selectivity due to the limited protonation and/or desorption processes of key intermediates. Herein, we propose a strategy to regulate the acid hardness nature of Cu catalyst by introducing appropriate modifier. Using density functional theory calculations, we firstly identified that the BaO-modified Cu showed optimal Gibbs free energies for key NO3RR steps, including the protonation of *NO and the desorption of *NH3. Experimentally, the BaO-modified Cu catalyst exhibited 97.3 % Faradaic efficiency (FE) for NH3 with a yield rate of 356.9 mmol h-1 gcat -1. It could also maintain high activity across a wide range of applied potentials and nitrate substrate concentrations. Detailed experimental and theoretical studies revealed that the Ba species could modulate the local electronic states of Cu, enhance the electron transfer rate, and optimize the adsorption/protonation/desorption processes of the N-containing intermediates, leading to the excellent catalytic performance for NO3 --to-NH3.

Modulating Spatial Distributions of Single Atoms on Supports for Enhanced Oxygen Evolution

Single-atom catalysts (SACs) hold great promise in oxygen evolution reactions due to their ultrahigh atomic utilization rates and uniform active sites. The performance of SACs is closely related to the spatial distributions of single atoms on the supports. However, modulating the spatial distributions of single atoms on the supports is extremely challenging. Herein, we precisely anchored Ir single atoms onto the face sites (Ir1/F-CoOOH) and the edge sites (Ir1/E-CoOOH) of CoOOH. Ir single atoms with distinct spatial distributions on CoOOH exhibited different electronic structures but nearly identical coordination environments. Nevertheless, Ir1/E-CoOOH required an overpotential of only 220 mV to reach a current density of 10 mA cm-2, which was 80 mV lower than that of Ir1/F-CoOOH. Mechanistic studies demonstrated that Ir single atoms with distinct spatial distributions activated the supports through different mechanisms.

Phototherapy in cancer treatment: strategies and challenges

Phototherapy has emerged as a promising modality in cancer treatment, garnering considerable attention for its minimal side effects, exceptional spatial selectivity, and optimal preservation of normal tissue function. This innovative approach primarily encompasses three distinct paradigms: Photodynamic Therapy (PDT), Photothermal Therapy (PTT), and Photoimmunotherapy (PIT). Each of these modalities exerts its antitumor effects through unique mechanisms-specifically, the generation of reactive oxygen species (ROS), heat, and immune responses, respectively. However, significant challenges impede the advancement and clinical application of phototherapy. These include inadequate ROS production rates, subpar photothermal conversion efficiency, difficulties in tumor targeting, and unfavorable physicochemical properties inherent to traditional phototherapeutic agents (PTs). Additionally, the hypoxic microenvironment typical of tumors complicates therapeutic efficacy due to limited agent penetration in deep-seated lesions. To address these limitations, ongoing research is fervently exploring innovative solutions. The unique advantages offered by nano-PTs and nanocarrier systems aim to enhance traditional approaches' effectiveness. Strategies such as generating oxygen in situ within tumors or inhibiting mitochondrial respiration while targeting the HIF-1α pathway may alleviate tumor hypoxia. Moreover, utilizing self-luminescent materials, near-infrared excitation sources, non-photoactivated sensitizers, and wireless light delivery systems can improve light penetration. Furthermore, integrating immunoadjuvants and modulating immunosuppressive cell populations while deploying immune checkpoint inhibitors holds promise for enhancing immunogenic cell death through PIT. This review seeks to elucidate the fundamental principles and biological implications of phototherapy while discussing dominant mechanisms and advanced strategies designed to overcome existing challenges-ultimately illuminating pathways for future research aimed at amplifying this intervention's therapeutic efficacy.

Molecular Weight Engineering Modulates Lignin-Metal Supramolecular Framework to Construct Carbon-Coated CoRu Alloy for Effective Overall Water Splitting

To overcome the challenges of low catalytic activity and instability, a molecular weight engineering strategy coupled with oxidative ammonolysis is developed to synthesize CoRu-based alloy catalysts with distinct morphologies and properties from biorefinery lignin. This approach effectively modulates intrinsic active sites and exposes unsaturated nitrogen-oxygen structures, thereby tailoring the morphology and defect structure of the carbon layers in the catalysts. The as-synthesized CoRu alloy catalysts from lignin precursors with varying molecular weights are designated as CoRu@OALC-EtOAC, CoRu@OALC-EtOH, and CoRu@OALC-Residual. CoRu@OALC-EtOAC, featuring a defect-rich graphitic carbon-coated CoRu alloy structure, exhibited exceptional overall water-splitting performance (1.48 V at 10 mA cm-2), significantly surpassing Pt/C || Ru/C (1.58 V at 10 mA cm-2). In contrast, CoRu@OALC-Residual, with its amorphous carbon-coated CoRu alloy structure, demonstrated remarkable stability (350 h at 100 mA cm-2), vastly outperforming Pt/C || Ru/C (6 h at 100 mA cm-2). In-situ Raman spectroscopy and DFT calculations revealed that the defect-rich carbon layers effectively adsorb *H intermediates, accelerating the catalytic process. This strong adsorption also induces carbon layer rearrangement, leading to its dissolution of the carbon layer and oxidation of CoRu metal particles. This strategy provides a universal method for biomass-derived catalysts, establishing a direct relationship between molecular weight, catalyst morphology, and electrocatalytic performance.

Isolated Metal Centers Activate Small Molecule Electrooxidation: Mechanisms and Applications

Electrochemical oxidation of small molecules shows great promise to substitute oxygen evolution reaction (OER) or hydrogen oxidation reaction (HOR) to enhance reaction kinetics and reduce energy consumption, as well as produce high-valued chemicals or serve as fuels. For these oxidation reactions, high-valence metal sites generated at oxidative potentials are typically considered as active sites to trigger the oxidation process of small molecules. Isolated atom site catalysts (IASCs) have been developed as an ideal system to precisely regulate the oxidation state and coordination environment of single-metal centers, and thus optimize their catalytic property. The isolated metal sites in IASCs inherently possess a positive oxidation state, and can be more readily produce homogeneous high-valence active sites under oxidative potentials than their nanoparticle counterparts. Meanwhile, IASCs merely possess the isolated metal centers but lack ensemble metal sites, which can alter the adsorption configurations of small molecules as compared with nanoparticle counterparts, and thus induce various reaction pathways and mechanisms to change product selectivity. More importantly, the construction of isolated metal centers is discovered to limit metal d-electron back donation to CO 2p* orbital and reduce the overly strong adsorption of CO on ensemble metal sites, which resolve the CO poisoning problems in most small molecules electro-oxidation reactions and thus improve catalytic stability. Based on these advantages of IASCs in the fields of electrochemical oxidation of small molecules, this review summarizes recent developments and advancements in IASCs in small molecules electro-oxidation reactions, focusing on anodic HOR in fuel cells and OER in electrolytic cells as well as their alternative reactions, such as formic acid/methanol/ethanol/glycerol/urea/5-hydroxymethylfurfural (HMF) oxidation reactions as key reactions. The catalytic merits of different oxidation reactions and the decoding of structure-activity relationships are specifically discussed to guide the precise design and structural regulation of IASCs from the perspective of a comprehensive reaction mechanism. Finally, future prospects and challenges are put forward, aiming to motivate more application possibilities for diverse functional IASCs.

Exploring the properties, types, and performance of atomic site catalysts in electrochemical hydrogen evolution reactions

Atomic site catalysts (ASCs) have recently gained prominence for their potential in the electrochemical hydrogen evolution reaction (HER) due to their exceptional activity, selectivity, and stability. ASCs with individual atoms dispersed on a support material, offer expanded surface areas and increased mass efficiency. This is because each atom in these catalysts serves as an active site, which enhances their catalytic activity. This review is focused on providing a detailed analysis of ASCs in the context of the HER. It will delve into their properties, types, and performance to provide a comprehensive understanding of their role in electrochemical HER processes. The introduction part underscores HER's significance in transitioning to sustainable energy sources and emphasizes the need for innovative catalysts like ASCs. The fundamentals of the HER section emphasizes the importance of understanding the HER and highlights the key role that catalysts play in HER. The review also explores the properties of ASCs with a specific emphasis on their atomic structure and categorizes the types based on their composition and structure. Within each category of ASCs, the review discusses their potential as catalysts for the HER. The performance section focuses on a thorough evaluation of ASCs in terms of their activity, selectivity, and stability in HER. The performance section assesses ASCs in terms of activity, selectivity, and stability, delving into reaction mechanisms via experimental and theoretical approaches, including density functional theory (DFT) studies. The review concludes by addressing ASC-related challenges in HER and proposing future research directions, aiming to inspire further innovation in sustainable catalysts for electrochemical HER.

Mn Doping at High-Activity Octahedral Vacancies of γ-Fe2O3 for Oxygen Reduction Reaction Electrocatalysis in Metal-Air Batteries

γ-Fe2O3 with the intrinsic cation vacancies is an ideal substrate for heteroatom doping into the highly active octahedral sites in spinel oxide catalysts. However, it is still a challenge to confirm the vacancy location of γ-Fe2O3 through experiments and obtain enhanced catalytic performance by preferential occupation of octahedral sites for heteroatom doping. Here, a Mn-doped γ-Fe2O3 incorporated with carbon nanotubes catalyst was developed to successfully achieve preferential doping into highly active octahedral sites by employing γ-Fe2O3 as the precursor. Further, the vacancy in γ-Fe2O3 was only located on octahedral sites rather than tetrahedral ones, which was first proved by direct experimental evidence through the clarification doping sites of Mn. Notably, the catalyst shows outstanding activity towards oxygen reduction reaction with the half-wave potential of 0.82 V and 0.64 V vs. reversible hydrogen electrode in alkaline and neutral electrolytes, respectively, as well as the maximum power density of 179 mWcm-2 and 403 mWcm-2 for Mg-air batteries and Al-air batteries, respectively. It could be attributed to the synergistic effect of the doping Mn on octahedral sites and the substrate γ-Fe2O3 along with the modification of the adsorption/desorption properties for oxygen-containing intermediates as well as the optimization of the reaction energy barriers.

Atomically Dispersed Fe2 and Ni Sites for Efficient and Durable Oxygen Electrocatalysis

Developing highly efficient, cost-effective, and robust electrocatalysts for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) is paramount for the large-scale commercialization of renewable fuel cells and rechargeable metal-air batteries. Herein, a new ternary-atom catalyst that is composed of paired Fe sites and single Ni sites (as Fe2-N6 and Ni-N4) coordinated onto hollow nitrogen-doped carbon microspheres is developed. The as-synthesized catalyst exhibits remarkable activities toward both the ORR and OER in alkaline media, with superior performances to those of the control materials that contain only Fe2-N6 or Ni-N4 sites. Density functional theory calculations and in situ infrared (IR) spectroscopic studies clearly reveal that the Fe2-N6 centers are the active sites for both ORR and OER, and their electrocatalytic activities are synergistically enhanced through optimization of their d-band centers by the Ni-N4 sites. This ternary-atom catalyst can potentially be a promising, alternative, sustainable catalyst to commercially used Pt- and Ru-based catalysts to drive both the ORR and the OER in rechargeable zinc-air batteries and other related applications.

Facing the "Cutting Edge:" Edge Site Engineering on 2D Materials for Electrocatalysis and Photocatalysis

The utilization of 2D materials as catalysts has garnered significant attention in recent years, primarily due to their exceptional features including high surface area, abundant exposed active sites, and tunable physicochemical properties. The unique geometry of 2D materials imparts them with versatile active sites for catalysis, including basal plane, interlayer, defect, and edge sites. Among these, edge sites hold particular significance as they not only enable the activation of inert 2D catalysts but also serve as platforms for engineering active sites to achieve enhanced catalytic performance. Here it is comprehensively aimed to summarize the state-of-the-art advancements in the utilization of edge sites on 2D materials for electrocatalysis and photocatalysis, with applications ranging from water splitting, oxygen reduction, and nitrogen reduction to CO2 reduction. Additionally, various approaches for harnessing and modifying edge sites are summarized and discussed. Here guidelines for the rational engineering of 2D materials for heterogeneous catalysis are provided.

Subtle 2D/2D MXene-Based Heterostructures for High-Performance Electrocatalytic Water Splitting

Developing efficient electrocatalysts is significant for the commercial application of electrocatalytic water splitting. 2D materials have presented great prospects in electrocatalysis for their high surface-to-volume ratio and tunable electronic properties. Particularly, MXene emerges as one of the most promising candidates for electrocatalysts, exhibiting unique advantages of hydrophilicity, outstanding conductivity, and exceptional stability. However, it suffers from lacking catalytic active sites, poor oxidation resistance, and easy stacking, leading to a significant suppression of the catalytic performance. Combining MXene with other 2D materials is an effective way to tackle the aforementioned drawbacks. In this review, the focus is on the accurate synthesis of 2D/2D MXene-based catalysts toward electrocatalytic water splitting. First, the mechanisms of electrocatalytic water splitting and the relative properties and preparation methods of MXenes are introduced to offer the basis for accurate synthesis of 2D/2D MXene-based catalysts. Then, the accurate synthesis methods for various categories of 2D/2D MXene-based catalysts, such as wet-chemical, phase-transformation, electrodeposition, etc., are systematically elaborated. Furthermore, in-depth investigations are conducted into the internal interactions and structure-performance relationship of 2D/2D MXene-based catalysts. Finally, the current challenges and future opportunities are proposed for the development of 2D/2D MXene-based catalysts, aiming to enlighten these promising nanomaterials for electrocatalytic water splitting.

Electronic Structure Engineering of RuNi Alloys Decrypts Hydrogen and Hydroxyl Active Site Separation and Enhancement for Efficient Alkaline Hydrogen Evolution

Rational design of the active sites of hydrolysis dissociation intermediates to weaken their active site competition and toxicity is a key challenge to achieve efficient and stable hydrogen evolution reaction (HER) in ruthenium-containing alloys. Density Functional Theory (DFT) simulations reveal that the transfer of the d-band electrons from Ru to Ni in RuNi alloys results in a Gibbs free energy of -0.12 eV for the Ru0.250Ni Fcc-site H*. In addition, the high spin state of the electrons outside the Ru nucleus strengthens the adsorption of OH* on the Ru─Ni bond, which weakens the active-site competition and toxicity successfully. This theoretical prediction is confirmed by electrodeposition of prepared aRuxNi, and the RuNi alloys obtained by Ru atom doping have excellent HER properties. aRu0.250Ni has overpotentials of 38 and 162.4 mV at -10 and -100 mA cm-2, respectively, and can be stably operated at -100 mA cm-2 Dual-electrode system aRu0.250Ni//bRu0Ni demonstrates an ultra-low battery voltage (1.86 V @500 mA cm-2) and excellent stability (24 h@300 mA cm-2). This holistic work resolves the mechanism of active site separation and strengthening in RuNi alloys, and provides a new design idea for the preparation of highly efficient alkaline HER electrodes.

Molten Salt-Assisted Synthesis of Porous Precious Metal-Based Single-Atom Catalysts for Oxygen Reduction Reaction

Precious metal-based single-atom catalysts (PM-SACs) hosted in N-doped carbon supports have shown new opportunities to revolutionize cathodic oxygen reduction reaction (ORR). However, stabilizing the high density of PM-Nx sites remains a challenge, primarily due to the inherently high free energy of isolated metal atoms, predisposing them to facile atomic agglomeration. Herein, a molten salt-assisted synthesis strategy is proposed to prepare porous PM1/N-CPores (PM = Ru, Pt, and Pd) electrocatalysts with densely accessible PM-Nx sites. A hierarchically porous N-doped carbon substrate (N-CPores), synthesized via the NaCl-assisted pyrolysis of zeolitic imidazolate framework-8, effectively improves the utilization of PM-Nx sites by increased reactants accessible surface area and reduced mass transfer resistance. In accordance with theoretical calculations, the as-prepared Ru1/N-CPores, featuring superior intrinsic active Ru-N4 sites, exhibit outstanding ORR turnover frequency of 6.19 e- site-1 s-1, and outperforms the commercial Pt/C with a 5.3-fold of mass activity (5.83 ± 0.61 A mg-1) at 0.8 V versus reversible hydrogen electrode. The commendable activity and stability of Ru1/N-CPores in a real fuel cell device further affirm its practical applicability.

Recent progress of density functional theory studies on carbon-supported single-atom catalysts for energy storage and conversion

Single-atom catalysts (SACs) have become the forefront and hotspot in energy storage and conversion research, inheriting the advantages of both homogeneous and heterogeneous catalysts. In particular, carbon-supported SACs (CS-SACs) are excellent candidates for many energy storage and conversion applications, due to their maximum atomic efficiency, unique electronic and coordination structures, and beneficial synergistic effects between active catalytic sites and carbon substrates. In this review, we briefly review the atomic-level regulation strategies for optimizing CS-SACs for energy storage and conversion, including coordination structure control, nonmetallic elemental doping, axial coordination design, and polymetallic active site construction. Then we summarize the recent progress of density functional theory studies on designing CS-SACs by the above strategies for electrocatalysis, such as hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction, CO2 reduction reaction, nitrogen reduction reaction, and electrosynthesis of urea, and electrochemical energy storage systems such as monovalent metal-sulfur batteries (Li-S and Na-S batteries). Finally, the current challenges and future opportunities in this emerging field are highlighted. This review will provide a helpful guideline for the rational design of the structure and functionality of CS-SACs, and contribute to material optimizations in applications of energy storage and conversion.

Efficient Bifunctional Electrocatalysts for Oxygen Evolution/Reduction Reactions in Two-Dimensional Metal-Organic Frameworks by a Constant Potential Method

The evolution of bifunctional catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalysts that are highly active, stable, and conductive is crucial for advancing metal-air batteries and fuel cells. We have here thoroughly explored the OER and ORR performance for a category of two-dimensional (2D) metal-organic frameworks (MOFs) called TM3(HADQ)2, and Rh3(HADQ)2 exhibits a promising bifunctional OER/ORR activity, with an overpotential of 0.31 V for both OER and ORR. The d-band center (εd) and crystal orbital Hamilton populations (COHP) are utilized to study the relationship between OER/ORR activity and the electronic structure of catalysts, and it is found that the elementary d-electron number (Ne) of the central TM for TM3(HADQ)2, as well as the electronegativity of the ligand TM-N4 and the intermediate O atom, are the main reason that affects the catalytic activity of OER/ORR. Additionally, Rh3(HADQ)2 can be proven through the constant potential method (CPM) and microkinetics method that it is an acidic OER/ORR bifunctional catalyst. Rh3(HADQ)2 has a high toxicity tolerance, making it a potential bifunctional catalyst. Our research contributes to both the rational design of SACs for various catalytic processes and the fabrication of bifunctional, cost-effective oxygen-electric catalysts.

Unveiling the Aggregation of M-N-C Single Atoms into Highly Efficient MOOH Nanoclusters during Alkaline Water Oxidation

M-N-C-type single-atom catalysts (SACs) are highly efficient for the electrocatalytic oxygen evolution reaction (OER). And the isolated metal atoms are usually considered real active sites. However, the oxidative structural evolution of coordinated N during the OER will probably damage the structure of M-N-C, hence resulting in a completely different reaction mechanism. Here, we reveal the aggregation of M-N-C materials during the alkaline OER. Taking Ni-N-C as an example, multiple characterizations show that the coordinated N on the surface of Ni-N-C is almost completely dissolved in the form of NO3 -, accompanied by the generation of abundant O functional groups on the surface of the carbon support. Accordingly, the Ni-N bonds are broken. Through a dissolution-redeposition mechanism and further oxidation, the isolated Ni atoms are finally converted to NiOOH nanoclusters supported by carbon as the real active sites for the enhanced OER. Fe-N-C and Co-N-C also have similar aggregation mechanism. Our findings provide unique insight into the structural evolution and activity origin of M-N-C-based catalysts under electrooxidative conditions.

Theoretical Prediction of Enhanced Hydrogen Evolution Reaction Electrocatalysts Based on Tantalum Phosphide

Ta-based transition metal catalysts have shown significant catalytic activity for the hydrogen evolution reaction (HER) in recent studies. However, the application of tantalum phosphide (TaP) in the HER has not been documented. Herein, a systematic study of TaP catalysts was performed through density functional theory (DFT). The performance of TaP (004) for the HER was predicted. Thermodynamic analyses of Ta-terminated and P-terminated surfaces with adsorbed hydrogen atoms were conducted, and the HER mechanism on TaP (004) surfaces was carefully investigated. Theoretical results revealed that TaP (004) exhibits excellent HER activity (ΔGH*=0.0456 eV), and both the Ta-terminated and P-terminated surfaces follow the Volmer-Heyrovsky mechanism under acidic conditions, with the Volmer step being the rate-determining step. A mixed surface strategy was also applied to explore the synergistic effects of Ta-terminated and P-terminated surfaces, which enhanced the HER activity. Additionally, the study screened dopants to assess their impact on the HER activity, revealing that doping with S, Ni, Co, Fe, and Cr could improve the HER performance.

Graphene-supported MN4 single-atom catalysts for multifunctional electrocatalysis enabled by axial Fe tetramer coordination

Multifunctional electrocatalysts for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) are crucial for development of the key electrochemical energy storage and conversion devices, for which single-atom catalyst (SAC) has present great promises. Very recently, some experimental works showed that structurally well-defined ultra-small transition-metal clusters (such as Fe and Co tetramers, denoted as Fe4 and Co4, respectively), can efficiently modulate the catalytic behavior of SACs by axial coordination. Herein, taking the graphene-supported MN4 SACs as representatives, we theoretically explored the feasibility of realizing multifunctional SACs for ORR, OER and HER by this novel axial coordination engineering. Through extensive first-principles calculations, from 23 candidates, IrN4 decorated with Fe4 (IrN4/Fe4) is identified as the promising trifunctional catalyst with the theoretical overpotential of 0.43, 0.51 and 0.30 V for OER, ORR and HER, respectively. RhN4/Fe4 and CoN4/Fe4 are recognized as potential OER and ORR bifunctional catalysts. In addition, NiN4/Fe4 exhibits the best ORR activity with an overpotential of 0.30 V, far superior to the pristine NiN4 SAC (0.88 V). Electronic structure analyses reveal that the significantly enhanced ORR/OER activity can be ascribed to the orbital and charge redistribution of Ni/Ir active center, resulting from its electronic interaction with Fe4 cluster. This work could stimulate and guide the rational design of graphene-based multifunctional SACs realized by axial coordination of small TM clusters, and provide insights into the modulation mechanism.

Single-Atom Catalysts on Covalent Organic Frameworks for Energy Applications

Single-atom catalysts (SACs) have been investigated and applied to energy conversion devices. However, issues of metal agglomeration, low metal loading, and substrate stability have hindered realization of the SACs' full potential. Recently, covalent organic framework (COF)-based SACs have emerged as promising materials to enable highly efficient catalytic reactions. Here, we summarize the representative COF-based SACs and their wide application in clean energy devices and conversion reactions, such as hydrogen evolution reaction, carbon dioxide reduction reaction, nitrogen reduction reaction, oxygen reduction reaction, and oxygen evolution reaction. Based on their catalysis conditions, these reactions are categorized into photocatalyzed and electrocatalyzed reactions. We also summarize their design strategies, including heteroatom inclusion, donor-acceptor pairs, pore engineering, interface engineering, etc. Although COF-based SACs are promising, more efforts, such as linkage engineering, functional groups, ionization, multifunctional sites for cocatalyzed systems, etc., could improve them to be the ideal SAC materials. At the end, we provide our perspectives on where the field will proceed in the next 5 years.

Epoxidized Single-Atom Co-N-C Catalysts Promote the Oxygen Reduction Reaction via a Two-Electron Pathway

Coordination structure and group modifications of single-atom catalysts are essential for regulating superficial electronic structures and reaction activities. Epoxy group-modified single-atom Co-N-C configuration demonstrates exceptional catalytic performance for hydrogen peroxide production. Through the manipulation of the coordination structure of Co-N-C and the doped epoxy groups, we elucidate the origin of catalytic activity in epoxygroup-modified Co-N-C configurations. Theoretical results indicate that the second coordination sphere of the Co-N-C structure is essential for the regulation of the two-electron pathway by the epoxy groups acting as cocatalysts. This cocatalytic mechanism originates from hydrogen bonding interactions between the epoxy groups and the OOH intermediates. Three epoxy groups within the second coordination sphere of Co-N-C configuration lead to the achievement of the optimal G*OOH (∼4.22 eV) for hydrogen peroxide production. This study offers novel insights into the design of catalytic materials for the electrosynthesis of hydrogen peroxide as well as the engineering of their surface structures.

Atomically Dispersed Mn-Doped Ru@RuO2 Core/Shell Nanostructure with High Acidic Water Oxidation Performance Arising from Multiple Synergies

The high overpotential and unsatisfactory stability of RuO2-based catalysts seriously hinder their application in acidic oxygen evolution reaction (OER). Herein, a Ru@RuO2 core/shell catalyst doped with atomically dispersed Mn species, denoted as Ru@Mn-RuO2, is reported, which is prepared by a facile one-pot method. Detailed structural characterizations confirm that Mn is homogeneously and atomically distributed in RuO2 shell, which causes lattice contraction of RuO2. The as-prepared Ru@Mn-RuO2 exhibits a very low overpotential of 190 mV at the current density of 10 mA cm-2 and an excellent stability of 360 h, far surpassing the control samples Ru@RuO2 without atomically dispersed Mn dopants and home-made RuO2 nanoparticles without metallic Ru core. With the further assistance of density functional theory calculations, the enhanced OER activity of Ru@Mn-RuO2 is attributed to multiple synergistic effects, including the MnOx-Ru (oxide shell) synergy, MnOx-Ru (metal core) synergy, and the Ru (core)-RuO2 (shell) synergy. Besides, the atomically dispersed Mn doping can increase the formation energy of soluble Ru cations, thus leading to the excellent stability of the Ru@Mn-RuO2 catalyst. This work shines light on the design of electrocatalysts with multiple synergistic effects towards efficient acid water splitting.

Designing a Novel C3-Fe-N Interface Local Coordination Microenvironment for Efficient Electrocatalytic Water Splitting

Developing single-atomic electrocatalysts (SACs) with high activity and stability for electrocatalytic water-splitting has been challenging. Moreover, the practical utilization of SACs is still far from meeting the the theoretical prediction. Herein a facile and easy scale-up fabrication method is proposed for designing a novel carbon-iron-nitrogen (C-Fe-N) electrocatalyst with a single atom electron bridge (C-Fe-N SAEBs), which exhibits lower overpotential and impedance than previously reported electrocatalysts. 0.8-C-Fe-N SAEBs exhibits significant activity and excellent stability in the bi-functional decomposition of water. The excellent performance of the C-Fe-N SAEBs electrocatalyst can be attributed to the strong coupling effect at the interface owing to the formation of a single atom C3-Fe-N local coordination microenvironment at the interface, which enhance the exposure of active sites and charge transfer, and reduced the adsorption energy barrier of intermediates. Theoretical calculation and synchrotron radiation analysis are performed to understand the mechanistic insights behind the experimental results. The results reveal that the active C3-Fe-N local coordination microenvironment at the interface not only improves water-splitting behavior but also provides a deeper understanding of local-interface geometry/electronic structure for improving the electrocatalytic activity. Thus, the proposed electrocatalyst, as well as the mechanistic insights into its properties, presents a significant stride toward practical application.

Carbon encapsulated nanoparticles: materials science and energy applications

The technological implementation of electrochemical energy conversion and storage necessitates the acquisition of high-performance electrocatalysts and electrodes. Carbon encapsulated nanoparticles have emerged as an exciting option owing to their unique advantages that strike a high-level activity-stability balance. Ever-growing attention to this unique type of material is partly attributed to the straightforward rationale of carbonizing ubiquitous organic species under energetic conditions. In addition, on-demand precursors pave the way for not only introducing dopants and surface functional groups into the carbon shell but also generating diverse metal-based nanoparticle cores. By controlling the synthetic parameters, both the carbon shell and the metallic core are facilely engineered in terms of structure, composition, and dimensions. Apart from multiple easy-to-understand superiorities, such as improved agglomeration, corrosion, oxidation, and pulverization resistance and charge conduction, afforded by the carbon encapsulation, potential core-shell synergistic interactions lead to the fine-tuning of the electronic structures of both components. These features collectively contribute to the emerging energy applications of these nanostructures as novel electrocatalysts and electrodes. Thus, a systematic and comprehensive review is urgently needed to summarize recent advancements and stimulate further efforts in this rapidly evolving research field.

Electron Reservoir Effect of Adjacent Fe Nanoclusters Boosts Atomic Fe Active Sites on Porous Carbon for the Both Electrocatalytic Oxygen Reduction and CO2 Reduction Reaction

Electrochemical oxygen reduction reaction (ORR) and carbon dioxide reduction reaction (CO2RR) are greatly significant in renewable energy-related devices and carbon-neutral closed cycle, while the development of robust and highly efficient electrocatalysts has remained challenges. Herein, a hybrid electrocatalyst, featuring axial N-coordinated Fe single atom sites on hierarchically N, P-codoped porous carbon support and Fe nanoclusters as electron reservoir (FeNCs/FeSAs-NPC), is fabricated via in situ thermal transformation of the precursor of a supramolecular polymer initiated by intermolecular hydrogen bonds co-assembly. The FeNCs/FeSAs-NPC catalyst manifests superior oxygen reduction activity with a half-wave potential of 0.91 V in alkaline solution, as well as high CO2 to CO Faraday efficiency (FE) of surpassing 90% in a wide potential window from -0.40 to -0.85 V, along with excellent electrochemical durability. Theoretical calculations indicate that the electron reservoir effect of Fe nanoclusters can trigger the electron redistribution of the atomic Fe moieties, facilitating the activation of O2 and CO2 molecules, lowering the energy barriers for rate-determining step, and thus contributing to the accelerated ORR and CO2RR kinetics. This work offers an effective design of electron coupling catalysts that have advanced single atoms coexisting with nanoclusters for efficient ORR and CO2RR.

Strategies for the Preparation of Single-Atom Catalysts Using Low-Dimensional Metal-Organic Frameworks

As single-atom catalysts are important energy materials, their preparation and synthesis methods have become particularly important. The unique structures of low-dimensional metal-organic frameworks and their derivatives provide various strategies for preparing single-atom catalysts. This paper summarizes various strategies for the preparation of single-atom catalysts based on low-dimensional metal-organic frameworks and their derivatives.

Electrocatalytic Synthesis of Urea: An In-depth Investigation from Material Modification to Mechanism Analysis

Industrial urea synthesis production uses NH3 from the Haber-Bosch method, followed by the reaction of NH3 with CO2, which is an energy-consuming technique. More thorough evaluations of the electrocatalytic C-N coupling reaction are needed for the urea synthesis development process, catalyst design, and the underlying reaction mechanisms. However, challenges of adsorption and activation of reactant and suppression of side reactions still hinder its development, making the systematic review necessary. This review meticulously outlines the progress in electrochemical urea synthesis by utilizing different nitrogen (NO3 -, N2, NO2 -, and N2O) and carbon (CO2 and CO) sources. Additionally, it delves into advanced methods in materials design, such as doping, facet engineering, alloying, and vacancy introduction. Furthermore, the existing classes of urea synthesis catalysts are clearly defined, which include 2D nanomaterials, materials with Mott-Schottky structure, materials with artificially frustrated Lewis pairs, single-atom catalysts (SACs), and heteronuclear dual-atom catalysts (HDACs). A comprehensive analysis of the benefits, drawbacks, and latest developments in modern urea detection techniques is discussed. It is aspired that this review will serve as a valuable reference for subsequent designs of highly efficient electrocatalysts and the development of strategies to enhance the performance of electrochemical urea synthesis.

In-Situ Construction of Fe-Doped NiOOH on the 3D Ni(OH)2 Hierarchical Nanosheet Array for Efficient Electrocatalytic Oxygen Evolution Reaction

Accessible and superior electrocatalysts to overcome the sluggish oxygen evolution reaction (OER) are pivotal for sustainable and low-cost hydrogen production through electrocatalytic water splitting. The iron and nickel oxohydroxide complexes are regarded as the most promising OER electrocatalyst attributed to their inexpensive costs, easy preparation, and robust stability. In particular, the Fe-doped NiOOH is widely deemed to be superior constituents for OER in an alkaline environment. However, the facile construction of robust Fe-doped NiOOH electrocatalysts is still a great challenge. Herein, we report the facile construction of Fe-doped NiOOH on Ni(OH)2 hierarchical nanosheet arrays grown on nickel foam (FeNi@NiA) as efficient OER electrocatalysts through a facile in-situ electrochemical activation of FeNi-based Prussian blue analogues (PBA) derived from Ni(OH)2. The resultant FeNi@NiA heterostructure shows high intrinsic activity for OER due to the modulation of the overall electronic energy state and the electrical conductivity. Importantly, the electrochemical measurement revealed that FeNi@NiA exhibits a low overpotential of 240 mV at 10 mA/cm2 with a small Tafel slope of 62 mV dec-1 in 1.0 M KOH, outperforming the commercial RuO2 electrocatalysts for OER.

Single Entity Electrocatalysis

Making a measurement over millions of nanoparticles or exposed crystal facets seldom reports on reactivity of a single nanoparticle or facet, which may depart drastically from ensemble measurements. Within the past 30 years, science has moved toward studying the reactivity of single atoms, molecules, and nanoparticles, one at a time. This shift has been fueled by the realization that everything changes at the nanoscale, especially important industrially relevant properties like those important to electrocatalysis. Studying single nanoscale entities, however, is not trivial and has required the development of new measurement tools. This review explores a tale of the clever use of old and new measurement tools to study electrocatalysis at the single entity level. We explore in detail the complex interrelationship between measurement method, electrocatalytic material, and reaction of interest (e.g., carbon dioxide reduction, oxygen reduction, hydrazine oxidation, etc.). We end with our perspective on the future of single entity electrocatalysis with a key focus on what types of measurements present the greatest opportunity for fundamental discovery.

Advanced Characterization Techniques and Theoretical Calculation for Single Atom Catalysts in Fenton-like Chemistry

Single-atom catalysts (SACs) have attracted extensive attention due to their unique catalytic properties and wide range of applications. Advanced characterization techniques, such as energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, scanning electron microscopy, and X-ray absorption fine-structure spectroscopy, have been used to investigate the elemental compositions, structural morphologies, and chemical bonding states of SACs in detail, aiming at unraveling the catalytic mechanism. Meanwhile, theoretical calculations, such as quantum chemical calculations and kinetic simulations, were used to predict the catalytic reaction pathways, active sites, and reaction kinetic behaviors of SACs, providing theoretical guidance for the design and optimization of SACs. This review overviews advanced characterization techniques and theoretical calculations for SACs in Fenton-like chemistry. Moreover, this work highlights the importance of advanced characterization techniques and theoretical calculations in the study of SACs and provides perspectives on the potential applications of SACs in the field of environmental remediation and the challenges of practical engineering.

Crystal Face-Dependent Behavior of Single-Atom Pt: Construct of SA-FLP Dual Active Sites for Efficient NO2 Detection

The strong potential of platinum single atom (PtSA) in gas sensor technology is primarily attributed to its high atomic economy. Nevertheless, it is imperative to conduct further exploration to understand the impact of PtSA on the active sites. In this study, the evolution of PtSA on (100)CeO2 and (111)CeO2 is examined, revealing notable disparities in the position and activity of surface PtSA on different crystal planes. The PtSA in (100)CeO2 surface can enhance the stability of Ce3+ and construct a frustrated Lewis pair (FLP) to form a double active site by combining the steric hindrance effect of oxygen vacancies, which increases the response value from 1.8 to 27 and reduce the response-recovery time from 140-192 s to 25-26 s toward five ppm NO2 at room temperature. Conversely, PtSA tends to bind to terminal oxygen on the surface of (111)CeO2 and become an independent reaction site. The response value of PtSA-(111)CeO2 surface only increased from 1.6 to 3.8. This research underscores the correlation between single atoms and crystal plane effects, laying the groundwork for designing and synthesizing ultra-stable and efficient gas sensors.

Role of Vacancy Defects and Nitrogen Dopants for the Reduction of Oxygen on Graphene

Disentangling the roles of nitrogen dopants and vacancy defects (VG) in metal-free carbon catalysts for the oxygen reduction reaction (ORR) ideally requires studying both the dopants and defects separately. Here, we systematically introduced nitrogen dopants and VGs via plasma treatment into the basal plane of monolayer graphene as a model carbon catalyst to investigate their specific roles in ORR catalysis. An increased defect density including dopants is positively associated with boosted ORR activity. Nitrogen dopants are responsible for an improved current via a 2e- pathway generating hydroperoxide, while VGs result in enhanced kinetics and water production. We therefore infer that VGs in graphene are responsible for the improved ORR kinetics, while nitrogen dopants majorly influence the selectivity of ORR reaction products. The nitrogen dopants without VGs lead to a higher overpotential compared with the pristine graphene. Instead of the attribution of the ORR active site to only nitrogen species in carbon materials, the improved ORR activity in nitrogen-doped carbon materials should be attributed to the active sites constituted of VGs, oxygen dopants, and nitrogen dopants. Through this work, we provide important insights into the intertwined roles of nitrogen and VGs as well as oxygen dopants in nitrogen-doped metal-free catalysts for a more efficient ORR.

Single-Atom-Based Nanoenzyme in Tissue Repair

Since the discovery of ferromagnetic nanoparticles Fe3O4 that exhibit enzyme-like activity in 2007, the research on nanoenzymes has made significant progress. With the in-depth study of various nanoenzymes and the rapid development of related nanotechnology, nanoenzymes have emerged as a promising alternative to natural enzymes. Within nanozymes, there is a category of metal-based single-atom nanozymes that has been rapidly developed due to low cast, convenient preparation, long storage, less immunogenicity, and especially higher efficiency. More importantly, single-atom nanozymes possess the capacity to scavenge reactive oxygen species through various mechanisms, which is beneficial in the tissue repair process. Herein, this paper systemically highlights the types of metal single-atom nanozymes, their catalytic mechanisms, and their recent applications in tissue repair. The existing challenges are identified and the prospects of future research on nanozymes composed of metallic nanomaterials are proposed. We hope this review will illuminate the potential of single-atom nanozymes in tissue repair, encouraging their sequential clinical translation.

Ordered mesoporous carbon with binary CoFe atomic species for highly efficient oxygen reduction electrocatalysis

The exploration of powerful, efficient and precious metal-free electrocatalysts for facilitating the sluggish kinetics of the oxygen reduction reaction (ORR) is a crucial endeavor in the development and application of energy conversion and storage devices. Herein, we have rationally designed and synthesized bimetallic CoFe species consisting of CoFe nanoparticles and atomically dispersed dual atoms anchored on an ordered mesoporous carbon matrix (CoFe/NC) as highly efficient ORR electrocatalysts. The pyrolyzation temperature for CoFe/NC plays a vital role in regulating the morphology and composition of both the carbon matrix and CoFe species. The optimized CoFe/NC-750 exhibits a favorable ORR performance in 0.1 M KOH with a high half-wave potential (E1/2) of 0.87 V vs. RHE, excellent tolerance to methanol and remarkable durability (no obvious decrease in E1/2 value after 3000 cycles), all of which are superior to the performance of commercial Pt/C. Experimental measurements and density functional theory (DFT) calculations reveal that the improved ORR performance of CoFe/NC-750 is mainly attributed to the electronic structure of atomically dispersed Fe active sites modulated by the surrounding CoFe alloys and Co single atoms, which accelerates the dissociation and reduction of intermediate OH* species and promotes the ORR process.

In-Situ Nanoarchitectonics of Fe/Co LDH over Cobalt-Enriched N-Doped Carbon Cookies as Facile Oxygen Redox Electrocatalysts for High-Rate Rechargeable Zinc-Air Batteries

The reality of long-term rechargeable and high-performance zinc-air batteries relies majorly on cost-effective and eminent bifunctional electrocatalysts, which can perform both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER). Herein, we demonstrate a new approach for the synthesis of in-situ-grown layered double hydroxide of iron and cobalt over a cobalt nanoparticle-enriched nitrogen-doped carbon frame (CoL 2:1) by a simple coprecipitation reaction with facile scale-up and explore its electrocatalytic ORR and OER activity for an electrically rechargeable zinc-air battery. Consequently, the developed composite displays excellent ORR and OER activity with an ORR half-wave potential of 0.84 V, a limiting current density of 5.85 mA/cm2, and an OER overpotential of 320 mV with exceptional stability. The outstanding bifunctionality index of the catalyst (ΔE = 0.72 V) inspired us to utilize it as a cathode catalyst in an in-house developed prototype zinc-air battery. The battery could easily supply a specific capacity of 804 mAh/g with a maximum peak power density of 161 mW/cm2. The battery exhibits an attractive charge-discharge profile with a lesser voltage gap of 0.76 V at 10 mA/cm2 with durability for a period of 200 h and a voltage efficiency of 97%, which surpassed the corresponding Pt/C + RuO2-based zinc-air battery. Further, a maximum load of 50 mA/cm2 could easily be sustained during cycling, revealing its outstanding stability. A series-connected two CoL 2:1-based zinc-air batteries effortlessly enlighten a pinwheel fan and LED panel simultaneously, revealing its practicality. The high electrical conductivity and greater specific surface area of Co/N-C and its robust attachment with Fe/Co LDH preserves both active sites, thereby resulting in exceptional performance. Our method is capable of being flexible enough to create various bifunctional Co/N-C-based composite electrodes, opening up a feasible pathway to rechargeable zinc-air batteries with maximum energy density.

Steering lithium and potassium storage mechanism in covalent organic frameworks by incorporating transition metal single atoms

Organic electrodes mainly consisting of C, O, H, and N are promising candidates for advanced batteries. However, the sluggish ionic and electronic conductivity limit the full play of their high theoretical capacities. Here, we integrate the idea of metal-support interaction in single-atom catalysts with π-d hybridization into the design of organic electrode materials for the applications of lithium (LIBs) and potassium-ion batteries (PIBs). Several types of transition metal single atoms (e.g., Co, Ni, Fe) with π-d hybridization are incorporated into the semiconducting covalent organic framework (COF) composite. Single atoms favorably modify the energy band structure and improve the electronic conductivity of COF. More importantly, the electronic interaction between single atoms and COF adjusts the binding affinity and modifies ion traffic between Li/K ions and the active organic units of COFs as evidenced by extensive in situ and ex situ characterizations and theoretical calculations. The corresponding LIB achieves a high reversible capacity of 1,023.0 mA h g-1 after 100 cycles at 100 mA g-1 and 501.1 mA h g-1 after 500 cycles at 1,000 mA g-1. The corresponding PIB delivers a high reversible capacity of 449.0 mA h g-1 at 100 mA g-1 after 150 cycles and stably cycled over 500 cycles at 1,000 mA g-1. This work provides a promising route to engineering organic electrodes.

Computational chemistry for water-splitting electrocatalysis

Electrocatalytic water splitting driven by renewable electricity has attracted great interest in recent years for producing hydrogen with high-purity. However, the practical applications of this technology are limited by the development of electrocatalysts with high activity, low cost, and long durability. In the search for new electrocatalysts, computational chemistry has made outstanding contributions by providing fundamental laws that govern the electron behavior and enabling predictions of electrocatalyst performance. This review delves into theoretical studies on electrochemical water-splitting processes. Firstly, we introduce the fundamentals of electrochemical water electrolysis and subsequently discuss the current advancements in computational methods and models for electrocatalytic water splitting. Additionally, a comprehensive overview of benchmark descriptors is provided to aid in understanding intrinsic catalytic performance for water-splitting electrocatalysts. Finally, we critically evaluate the remaining challenges within this field.

Electron-Sponge Nature of Polyoxometalates for Next-Generation Electrocatalytic Water Splitting and Nonvolatile Neuromorphic Devices

Designing next-generation molecular devices typically necessitates plentiful oxygen-bearing sites to facilitate multiple-electron transfers. However, the theoretical limits of existing materials for energy conversion and information storage devices make it inevitable to hunt for new competitors. Polyoxometalates (POMs), a unique class of metal-oxide clusters, have been investigated exponentially due to their structural diversity and tunable redox properties. POMs behave as electron-sponges owing to their intrinsic ability of reversible uptake-release of multiple electrons. In this review, numerous POM-frameworks together with desired features of a contender material and inherited properties of POMs are systematically discussed to demonstrate how and why the electron-sponge-like nature of POMs is beneficial to design next-generation water oxidation/reduction electrocatalysts, and neuromorphic nonvolatile resistance-switching random-access memory devices. The aim is to converge the attention of scientists who are working separately on electrocatalysts and memory devices, on a point that, although the application types are different, they all hunt for a material that could exhibit electron-sponge-like feature to realize boosted performances and thus, encouraging the scientists of two completely different fields to explore POMs as imperious contenders to design next-generation nanodevices. Finally, challenges and promising prospects in this research field are also highlighted.

Surface defect-engineered Fe doping in layered Co-based complex as highly efficient bifunctional electrocatalysts for overall water splitting

The electrocatalytic splitting of water to produce hydrogen is regarded as an efficient and promising strategy but is limited by its large overpotential; thus, a highly efficient electrocatalyst is urgently needed. Mixed metal doping is an important strategy in defect engineering because the heteroatoms can change the intrinsic structure to form defects by affecting the atomic coordination mode and adjusting the electronic structure, which is often accompanied by morphological changes. Herein, two-dimensional layered bimetallic Co-pydc containing axially coordinated water molecules was selected by producing surface defects through Fe doping in Co centers as bifunctional electrocatalysts for OER and HER. The optimized Co0.59Fe0.41-pydc possesses outstanding OER performance with the lowest overpotential of 262 mV to reach j = 10 mA cm-2, and Co0.75Fe0.25-pydc possesses superior HER performance with the lowest overpotential of 96 mV at j = 10 mA cm-2. Furthermore, the overall water splitting device assembled with Co0.59Fe0.41-pydc@NF//Co0.59Fe0.41-pydc@NF affords a current density of 10 mA cm-2 at only 1.687 V. This work emphasizes the surface defects formed by tuning the electronic structure of metal centres accompanied with morphological changes of bimetallic dopants for efficient overall water splitting.

Integrating Host Design and Tailored Electronic Effects of Yolk-Shell Zn-Mn Diatomic Sites for Efficient CO2 Electroreduction

Modulating the surface and spatial structure of the host is associated with the reactivity of the active site, and also enhances the mass transfer effect of the CO2 electroreduction process (CO2 RR). Herein, we describe the development of two-step ligand etch-pyrolysis to access an asymmetric dual-atomic-site catalyst (DASC) composed of a yolk-shell carbon framework (Zn1 Mn1 -SNC) derived from S,N-coordinated Zn-Mn dimers anchored on a metal-organic framework (MOF). In Zn1 Mn1 -SNC, the electronic effects of the S/N-Zn-Mn-S/N configuration are tailored by strong interactions between Zn-Mn dual sites and co-coordination with S/N atoms, rendering structural stability and atomic distribution. In an H-cell, the Zn1 Mn1 -SNC DASC shows a low onset overpotential of 50 mV and high CO Faraday efficiency of 97 % with a low applied overpotential of 343 mV, thus outperforming counterparts, and in a flow cell, it also reaches a high current density of 500 mA cm-2 at -0.85 V, benefitting from the high structure accessibility and active dual sites. DFT simulations showed that the S,N-coordinated Zn-Mn diatomic site with optimal adsorption strength of COOH* lowers the reaction energy barrier, thus boosting the intrinsic CO2 RR activity on DASC. The structure-property correlation found in this study suggests new ideas for the development of highly accessible atomic catalysts.

The DFT and Machine Learning Method Accelerated the Discovery of DMSCs with High ORR and OER Catalytic Activities

The oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) are crucial for the conversion of clean energy. Recently, dual-metal-site catalysts (DMSCs) have gained much attention due to their high atom utilization, stronger stability, and better catalytic performance. An advanced method that combines density functional theory (DFT) and machine learning (ML) has been employed in this study to investigate the adsorption free energies of adsorbates on hundreds of potential catalysts, with the aim of screening for catalysts that are highly active for the ORR and OER. The result of this study is that 30 DMSCs with ORR activity superior to Pt, 10 DMSCs with OER activity superior to RuO2, and 4 bifunctional catalysts for the OER and ORR are identified. This work provides guidance for the rational selection of metals on DMSCs to prepare catalysts with a high electrocatalytic performance for renewable energy applications.

Iron oxide-promoted photochemical oxygen reduction to hydrogen peroxide (H2O2)

Hydrogen peroxide (H2O2) is a valuable green oxidant with a wide range of applications. Furthermore, it is recognized as a possible future energy carrier achieving safe operation, storage and transportation. The photochemical production of H2O2 serves as a promising alternative to the waste- and energy-intensive anthraquinone process. Following the 12 principles of Green Chemistry, we demonstrate a facile and general approach to sustainable catalyst development utilizing earth-abundant iron and biobased sources only. We developed several iron oxide (FeOx) nanoparticles (NPs) for successful photochemical oxygen reduction to H2O2 under visible light illumination (445 nm). Achieving a selectivity for H2O2 of >99%, the catalyst material could be recycled for up to four consecutive rounds. An apparent quantum yield (AQY) of 0.11% was achieved for the photochemical oxygen reduction to H2O2 with visible light (445 nm) at ambient temperatures and pressures (9.4-14.8 mmol g-1 L-1). Reaching productivities of H2O2 of at least 1.7 ± 0.3 mmol g-1 L-1 h-1, production of H2O2 was further possible via sunlight irradiation and in seawater. Finally, a detailed mechanism has been proposed on the basis of experimental investigation of the catalyst's properties and computational results.

Transition Metal Functionalized C30N12S6 as High-Performance Trifunctional Catalysts with Integrated Descriptors toward Hydrogen Evolution, Oxygen Evolution, and Oxygen Reduction Reactions: A Case of High-Throughput First-Principles Screening within the Framework of TM-N2@C30N10S6

In energy conversion and storage technologies, the design of highly efficient trifunctional electrocatalysts integrating with the high hydrogen evolution reaction (HER) and oxygen evolution/reduction reaction (OER/ORR) activities is highly desirable. Herein, utilizing first-principles computations, a novel periodically ordered macropore C30N12S6 monolayer was proposed, and the stability analysis attests to its good stability. Single transition metal (TM) atom anchored onto this newly proposed C30N12S6 monolayer to form single-atom catalysts, as achieved by TM-N2@C30N10S6, among which the Co-N2@C30N10S6 is the most promising multifunctional catalyst toward HER/OER/ORR with low overpotential of 0.01/0.59/0.3 V; meanwhile, the Rh-N2@C30N10S6 can be used as a bifunctional OER/ORR catalyst with low overpotential of 0.37/0.44 V, overmatching the landmark Pt (111) and IrO2/RuO2 catalysts. Particularly, the TM-d orbital in TM@CNS is remarkably hybridized with the O-p orbital of oxygenated intermediates, so that the lone electrons initially located at the antibonding orbital pair up and fill the downward bonding orbital, allowing OH* to be suitably adsorbed on TM@CNS, enhancing the catalytic performance. The relevant attributes, such as good stabilities and metallic features, ensured their applications in ambient conditions. Moreover, multilevel descriptors were constructed to clarify the origin of activity on TM@CNS, such as ΔGOH* (Gibbs free energy of OH*), εd (d-band center), COHP (crystal orbital Hamilton population), Nd/Nd + s (number of d/d + s electrons) and φ (descriptor), among which the filling of outer d-electrons of TM atom significantly affects the value of ΔGOH* that can determine the overpotential and, thus, become a key descriptor.

Review of Carbon Support Coordination Environments for Single Metal Atom Electrocatalysts (SACS)

This topical review focuses on the distinct role of carbon support coordination environment of single-atom catalysts (SACs) for electrocatalysis. The article begins with an overview of atomic coordination configurations in SACs, including a discussion of the advanced characterization techniques and simulation used for understanding the active sites. A summary of key electrocatalysis applications is then provided. These processes are oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), nitrogen reduction reaction (NRR), and carbon dioxide reduction reaction (CO2 RR). The review then shifts to modulation of the metal atom-carbon coordination environments, focusing on nitrogen and other non-metal coordination through modulation at the first coordination shell and modulation in the second and higher coordination shells. Representative case studies are provided, starting with the classic four-nitrogen-coordinated single metal atom (MN4 ) based SACs. Bimetallic coordination models including homo-paired and hetero-paired active sites are also discussed, being categorized as emerging approaches. The theme of the discussions is the correlation between synthesis methods for selective doping, the carbon structure-electron configuration changes associated with the doping, the analytical techniques used to ascertain these changes, and the resultant electrocatalysis performance. Critical unanswered questions as well as promising underexplored research directions are identified.

Precise Design and Modification Engineering of Single-Atom Catalytic Materials for Oxygen Reduction

Due to their unique electronic and structural properties, single-atom catalytic materials (SACMs) hold great promise for the oxygen reduction reaction (ORR). Coordinating environmental and engineering strategies is the key to improving the ORR performance of SACMs. This review summarizes the latest research progress and breakthroughs of SACMs in the field of ORR catalysis. First, the research progress on the catalytic mechanism of SACMs acting on ORR is reviewed, including the latest research results on the origin of SACMs activity and the analysis of pre-adsorption mechanism. The study of the pre-adsorption mechanism is an important breakthrough direction to explore the origin of the high activity of SACMs and the practical and theoretical understanding of the catalytic process. Precise coordination environment modification, including in-plane, axial, and adjacent site modifications, can enhance the intrinsic catalytic activity of SACMs and promote the ORR process. Additionally, several engineering strategies are discussed, including multiple SACMs, high loading, and atomic site confinement. Multiple SACMs synergistically enhance catalytic activity and selectivity, while high loading can provide more active sites for catalytic reactions. Overall, this review provides important insights into the design of advanced catalysts for ORR.

Atomically Dispersed ZnN4 Sites Anchored on P-Functionalized Carbon with Hierarchically Ordered Porous Structures for Boosted Electroreduction of CO2

Tuning the coordination structures of metal sites is intensively studied to improve the performances of single-atom site catalysts (SASC). However, the pore structure of SASC, which is highly related to the accessibility of active sites, has received little attention. In this work, single-atom ZnN4 sites embedded in P-functionalized carbon with hollow-wall and 3D ordered macroporous structure (denoted as H-3DOM-ZnN4 /P-C) are constructed. The creation of hollow walls in ordered macroporous structures can largely increase the external surface area to expose more active sites. The introduction of adjacent P atoms can optimize the electronic structure of ZnN4 sites through long-rang regulation to enhance the intrinsic activity and selectivity. In the electrochemical CO2 reduction reaction, H-3DOM-ZnN4 /P-C exhibits high CO Faradaic efficiency over 90% in a wide potential window (500 mV) and a large turnover frequency up to 7.8 × 104  h-1 at -1.0 V versus reversible hydrogen electrode, much higher than its counterparts without the hierarchically ordered structure or P-functionalization.

Cocatalysts-Photoanode Interface in Photoelectrochemical Water Splitting: Understanding and Insights

Sluggish oxygen evolution reactions on photoanode surfaces severely limit the application of photoelectrochemical (PEC) water splitting. The loading of cocatalysts on photoanodes has been recognized as the simplest and most efficient optimization scheme, which can reduce the surface barrier, provide more active sites, and accelerate the surface catalytic reaction kinetics. Nevertheless, the introduction of cocatalysts inevitably generates interfaces between photoanodes and oxygen evolution cocatalysts (Ph/OEC), which causes severe interfacial recombination and hinders the carrier transfer. Recently, many researchers have focused on cocatalyst engineering, while few have investigated the effect of the Ph/OEC interface. Hence, to maximize the advantages of cocatalysts, interfacial problems for designing efficient cocatalysts are systematically introduced. In this review, the interrelationship between the Ph/OEC and PEC performance is classified and some methods for characterizing Ph/OEC interfaces are investigated. Additionally, common interfacial optimization strategies are summarized. This review details cocatalyst-design-based interfacial problems, provides ideas for designing efficient cocatalysts, and offers references for solving interfacial problems.