Co-ordinated expression of multiple enzymes in different subcellular compartments in plants

A novel nucleic acid linker for multi-gene expression enhances plant and animal synthetic biology

The production of compact vectors for gene stacking is hindered by a lack of effective linkers. Here, we report that a 26-nt nucleic acid linker, NAL1, from the fungus Glarea lozoyensis and its truncated derivatives could connect two genes as a bicistron, enabling independent translation in a maize protoplast transient expression system and human 293 T cells. The optimized 9-nt NAL10 linker was then used to connect four genes driven by a bidirectional promoter; this combination was successfully used to reconstruct the astaxanthin biosynthesis pathway in transgenic maize. The short and efficient nucleic acid linker NAL10 can be widely used in multi-gene expression and synthetic biology in animals and plants.

Inducible expression of human papillomavirus-16 L1 capsomeres in the plastomes of Nicotiana tabacum: Transplastomic plants develop normal flowers and pollen

Human papillomavirus type-16 (HPV-16) is the major HPV type involved in causing cervical cancer among women. The disease burden is high in developing and underdeveloped countries. Previously, the constitutive expression of HPV-16 L1 protein led to male sterility in transplastomic tobacco plants. Here, the HPV-16 L1 gene was expressed in chloroplasts of Nicotiana tabacum under the control of an ethanol-inducible promoter, trans-activated by nucleus-derived signal peptide. Plants containing nuclear component were transformed with transformation vector pEXP-T7-L1 by biolistic gun. The transformation and homoplasmic status of transformed plants was verified by polymerase chain reaction and Southern blotting, respectively. Protein was induced by spraying 5% ethanol for 7 consecutive days. The correct folding of L1 protein was confirmed by antigen-capture ELISA using a conformation-specific antibody. The L1 protein accumulated up to 3 μg/g of fresh plant material. The L1 protein was further purified using affinity chromatography. All transplastomic plants developed normal flowers and produced viable seeds upon self-pollination. Pollens also showed completely normal structure under light microscope and scanning electron microscopy. These data confirm the use of the inducible expression as plant-safe approach for expressing transgenes in plants, especially those genes that cause detrimental effects on plant growth and morphology.

Chloroplast-based inducible expression of ESAT-6 antigen for development of a plant-based vaccine against tuberculosis

Mycobacterium tuberculosis causes tuberculosis in humans. The major disease burden of tuberculosis lies in developing countries. Lack of an effective vaccine for adults is one of the major hurdles for controlling this deadly disease. In the present study, 6 kDa early secretory antigenic target (ESAT-6) of M. tuberculosis was inducibly expressed in chloroplasts of Nicotiana tabacum. The expression of ESAT-6 in chloroplasts was controlled by T7 promoter that was activated by nuclear-generated signal peptide. Tobacco plants, containing nuclear component, were transformed via biolistic bombardment with pEXP-T7-ESAT-6 obtained by Gateway® cloning. Transformation and homoplasmic status of transplastomic plants was confirmed by polymerase chain reaction and Southern blotting. Plants were induced for protein expression by spraying with 5% ethanol for 1 day, 3 days, 7 days and 10 days. ESAT-6 protein was detected by immunoblot analysis and maximum protein was obtained for 10 days induced plants that was estimated to accumulate up to 1.2% of total soluble fraction of protein. Transplastomic plants showed completely normal morphology. Transplastomic and untransformed plants became slightly chlorotic upon prolonged exposure to ethanol until 10 days. Taken together, this data could help in the development of an antigen-based subunit vaccine against tuberculosis.

Expression of a novel bi-directional Brassica napus promoter in soybean

The expression profile of a natural bi-directional promoter, derived from the Brassica napus EPSPS-A gene, was studied in transgenic soybean (Glycine max C.V. Maverick) lines. Two constructs, pDAB100331 and pDAB100333, were assembled to test the bi-directionality of the promoter. Two reporter genes, gfp and gusA, were employed and they were interchangeably placed in both constructs, one on each end of the promoter such that both proteins expressed divergently in each construct. In the T0 generation, GUS expression was more uniform throughout the leaf of pDAB100333 transgenic plants, where the gusA gene was expressed from the downstream or EPSPS-A end of the bi-directional promoter. Comparatively, GUS expression was more localized in the midrib and veins of the leaf of pDAB100331 transgenic plants, where the gusA gene was expressed from the upstream end of the bi-directional promoter. These observations indicated a unique expression pattern from each end of the promoter and consistently higher expression in genes expressed from the downstream end (e.g., EPSPS-A end) of the promoter in the tissues examined. The GFP expression pattern followed that of GUS when placed in the same position relative to the promoter. In the T1 generation, transcript analysis also showed higher expression of both gusA and gfp when those genes were located at the downstream end of the promoter. Accordingly, the pDAB100331 events exhibited a higher gfp/gusA transcript ratio, while pDAB100333 events produced a higher gusA/gfp transcript ratio consistent with the observations in T0 plants. These results demonstrated that the EPSPS-A gene bidirectional promoter can be effectively utilized to drive expression of two transgenes for the desired traits.

Coordinated protein co-expression in plants by harnessing the synergy between an intein and a viral 2A peptide

A novel approach is developed for coordinated expression of multiple proteins from a single transgene in plants. An Ssp DnaE mini-intein variant engineered for hyper-N-terminal autocleavage is covalently linked to the foot-and-mouth disease virus 2A (F2A) peptide with unique ribosome skipping property, via a peptide linker, to create an 'IntF2A' self-excising fusion protein domain. This IntF2A domain acts, in cis, to direct highly effective release of its flanking proteins of interest (POIs) from a 'polyprotein' precursor in plants. This is successfully demonstrated in stably transformed cultured tobacco cells as well as in different organs of transgenic tobacco plants. Highly efficient polyprotein processing mediated by the IntF2A domain was also demonstrated in lettuce and Nicotiana benthamiana based on transient expression. Protein constituents released from the polyprotein precursor displayed proper function and accumulated at similar levels inside the cells. Importantly, no C-terminal F2A extension remains on the released POIs. We demonstrated co-expression of as many as three proteins in plants without compromising expression levels when compared with those using single-protein vectors. Accurate differential cellular targeting of released POIs is also achieved. In addition, we succeeded in expressing a fully assembled and functional chimeric anti-His Tag antibody in N. benthamiana leaves. The IntF2A-based polyprotein transgene system overcomes key impediments of existing strategies for multiprotein co-expression in plants, which is particularly important for gene/trait stacking.

Production of dengue virus envelope protein domain III-based antigens in tobacco chloroplasts using inducible and constitutive expression systems

Dengue fever is a disease in many parts of the tropics and subtropics and about half the world's population is at risk of infection according to the World Health Organization. Dengue is caused by any of the four related dengue virus serotypes DEN-1, -2, -3 and -4, which are transmitted to people by Aedes aegypti mosquitoes. Currently there is only one vaccine (Dengvaxia(®)) available (limited to a few countries) on the market since 2015 after half a century's intensive efforts. Affordable and accessible vaccines against dengue are hence still urgently needed. The dengue envelop protein domain III (EDIII), which is capable of eliciting serotype-specific neutralizing antibodies, has become the focus for subunit vaccine development. To contribute to the development of an accessible and affordable dengue vaccine, in the current study we have used plant-based vaccine production systems to generate a dengue subunit vaccine candidate in tobacco. Chloroplast genome engineering was applied to express serotype-specific recombinant EDIII proteins in tobacco chloroplasts using both constitutive and ethanol-inducible expression systems. Expression of a tetravalent antigen fusion construct combining EDIII polypeptides from all four serotypes was also attempted. Transplastomic EDIII-expressing tobacco lines were obtained and homoplasmy was verified by Southern blot analysis. Northern blot analyses showed expression of EDIII antigen-encoding genes. EDIII protein accumulation levels varied for the different recombinant EDIII proteins and the different expression systems, and reached between 0.8 and 1.6 % of total cellular protein. Our study demonstrates the suitability of the chloroplast compartment as a production site for an EDIII-based vaccine candidate against dengue fever and presents a Gateway(®) plastid transformation vector for inducible transgene expression.

Multimodal protein constructs for herbivore insect control

Transgenic plants expressing combinations of microbial or plant pesticidal proteins represent a promising tool for the efficient, durable control of herbivorous insects. In this review we describe current strategies devised for the heterologous co-expression of pesticidal proteins in planta, some of which have already shown usefulness in plant protection. Emphasis is placed on protein engineering strategies involving the insertion of single DNA constructs within the host plant genome. Multimodal fusion proteins integrating complementary pesticidal functions along a unique polypeptide are first considered, taking into account the structural constraints associated with protein or protein domain grafting to biologically active proteins. Strategies that allow for the co- or post-translational release of two or more pesticidal proteins are then considered, including polyprotein precursors releasing free proteins upon proteolytic cleavage, and multicistronic transcripts for the parallel translation of single protein-encoding mRNA sequences.

Coordinate expression of multiple proteins in plant cells by exploiting endogenous kex2p-like protease activity

Simultaneous expression of multiple proteins in plants finds ample applications. Here, we examined the biotechnological application of native kex2p-like protease activity in plants for coordinate expression of multiple secretory proteins from a single transgene encoding a cleavable polyprotein precursor. We expressed a secretory red fluorescent protein (DsRed) or human cytokine (GMCSF), fused to a downstream green fluorescent protein (GFP) by a linker containing putative recognition sites of the kex2p-like protease in tobacco cells and referred to them as RKG and GKG cells, respectively. Our analyses showed that GFP is cleaved off the fusion proteins and secreted into the media by both RKG and GKG cells. The cleaved GFP product displayed the expected fluorescence characteristics. Using GFP immunoprecipitation and fluorescence analysis, the cleaved DsRed product in the RKG cells was found to be functional as well. However, DsRed was not detected in the RKG culture medium, possibly due to its tetramer formation. Cleaved and biologically active GMCSF could also be detected in GKG cell extracts, but secreted GMCSF was found to be only at a low level, likely because of instability of GMCSF protein in the medium. Processing of polyprotein precursors was observed to be similarly effective in tobacco leaf, stem and root tissues. Importantly, we also demonstrated that, via agroinfiltration, polyprotein precursors can be efficiently processed in plant species other than tobacco. Collectively, our results demonstrate the utility of native kex2p-like protease activity for the expression of multiple secretory proteins in plant cells using cleavable polyprotein precursors containing kex2p linker(s).

A ubiquitin-based vector for the co-ordinated synthesis of multiple proteins in plants

The genetic engineering of complex traits into crop plants will ultimately require strategies to co-express more than one protein at the same time. Here, we report the development of a ubiquitin (Ub)-based expression method that can generate two proteins from a single transcript. It contains coding regions for the proteins of interest, separated in-frame by the coding region for the C-terminal end of Ub followed by a full-length Ub. On expression in tobacco, this polycistronic messenger RNA (mRNA) is translated to produce a chimeric protein that is rapidly processed by endogenous deubiquitinating proteases to release the two proteins plus a Ub moiety in intact forms. The C-terminal protein domain is released without additional amino acids, whereas the N-terminal protein domain retains the short C-terminal end of Ub. The analysis of vectors with progressively shorter C-terminal ends indicates that only the last six C-terminal amino acids of the proximal Ub domain are needed for efficient processing in plants. By comparing the levels of luciferase and beta-glucuronidase simultaneously expressed by this method in multiple independent tobacco transformants, we synthesized consistently similar ratios of the two proteins over a wide range of protein amounts. Ub-based polyprotein vectors should facilitate the genetic engineering of crops by providing a simple method for the co-ordinated and stoichiometric synthesis of two or more proteins.

Approaches to achieve high-level heterologous protein production in plants

Plants offer an alternative to microbial fermentation and animal cell cultures for the production of recombinant proteins. For protein pharmaceuticals, plant systems are inherently safer than native and even recombinant animal sources. In addition, post-translational modifications, such as glycosylation, which cannot be achieved with bacterial fermentation, can be accomplished using plants. The main advantage foreseen for plant systems is reduced production costs. Plants should have a particular advantage for proteins produced in bulk, such as industrial enzymes, for which product pricing is low. In addition, edible plant tissues are well suited to the expression of vaccine antigens and pharmaceuticals for oral delivery. Three approaches have been followed to express recombinant proteins in plants: expression from the plant nuclear genome; expression from the plastid genome; and expression from plant tissues carrying recombinant plant viral sequences. The most important factor in moving plant-produced heterologous proteins from developmental research to commercial products is to ensure competitive production costs, and the best way to achieve this is to boost expression. Thus, considerable research effort has been made to increase the amount of recombinant protein produced in plants. This research includes molecular technologies to increase replication, to boost transcription, to direct transcription in tissues suited for protein accumulation, to stabilize transcripts, to optimize translation, to target proteins to subcellular locations optimal for their accumulation, and to engineer proteins to stabilize them. Other methods include plant breeding to increase transgene copy number and to utilize germplasm suited to protein accumulation. Large-scale commercialization of plant-produced recombinant proteins will require a combination of these technologies.

A Gateway-based platform for multigene plant transformation

The post-genomic era offers unrivalled opportunities for genetic manipulation of polygenic traits, multiple traits, and multiple gene products. However, remaining technical hurdles make the manipulation of multiple genes in plants difficult. Here we describe a Gateway-based vector system to enable multiple transgenes to be directly linked or fused. The vector system consists of a destination vector and two special attL-flanked entry vectors each containing an attR cassette incompatible with the attL. By multiple rounds of LR recombination reactions, which we call MultiRound Gateway, multiple transgenes can be delivered sequentially and indefinitely into the Gateway-compatible destination vector through alternate use of the two special entry vectors. In our proof-of-principle experiments we have used this vector system to construct a plant transformation vector containing seven functional DNA fragments, including a screening marker gene, two reporter genes and four matrix attachment region sequences. This system provides a platform for fully realizing the potential of plant genetic manipulation.

A potyvirus-based gene vector allows producing active human S-COMT and animal GFP, but not human sorcin, in vector-infected plants

Potato virus A (PVA), a potyvirus with a (+)ssRNA genome translated to a large polyprotein, was engineered and used as a gene vector for expression of heterologous proteins in plants. Foreign genes including jellyfish GFP (Aequorea victoria) encoding the green fluorescent protein (GFP, 27 kDa) and the genes of human origin (Homo sapiens) encoding a soluble resistance-related calcium-binding protein (sorcin, 22 kDa) and the catechol-O-methyltransferase (S-COMT; 25 kDa) were cloned between the cistrons for the viral replicase and coat protein (CP). The inserts caused no adverse effects on viral infectivity and virulence, and the inserted sequences remained intact in progeny viruses in the systemically infected leaves. The heterologous proteins were released from the viral polyprotein following cleavage by the main viral proteinase, NIa, at engineered proteolytic processing sites flanking the insert. Active GFP, as indicated by green fluorescence, and S-COMT with high levels of enzymatic activity were produced. In contrast, no sorcin was detected despite the expected equimolar amounts of the foreign and viral proteins being expressed as a polyprotein. These data reveal inherent differences between heterologous proteins in their suitability for production in plants.

Inducible trans-activation of plastid transgenes: expression of the R. eutropha phb operon in transplastomic tobacco

Deleterious effects of constitutive transgene expression can occur if gene products are harmful to the transformed plant. Constraints such as growth inhibition and male sterility have been observed in plastid transformants containing the phb operon encoding the genes required for the production of the polyester polyhydroxybutyric acid (PHB). In order to induce PHB synthesis in tobacco in a well-timed manner, we have constructed a trans-activation system to regulate transcription of the phb operon in plastids. This system consists of a nuclear-located, ethanol-inducible T7RNA polymerase (T7RNAP) which is targeted to plastids harboring the phb operon under control of T7 regulatory elements. Following treatment with 5% ethanol, moderate induction of PHB synthesis was found. PHB amounts reached 1,383 ppm in dry weight, and an overall background activity of 171 ppm was measured in uninduced tissues. On the transcriptional level, T7RNAP induction was proven and we found that the phb operon is transcribed into at least two mRNAs. Without ethanol induction, development of flowers and fertile seeds was possible. Thus, the main problem of inhibitory transgene expression was solved. Our results show that this inducible trans-activation system could serve as an alternative to constitutive expression of transgenes in the plastome.

Simultaneous production of two foreign proteins from a polyvirus-based vector

With the aim of developing a biotechnological tool for the production of foreign proteins in plants, we first engineered an infectious turnip mosaic virus (TuMV) cDNA that contained the jellyfish green fluorescent protein (GFP) gene or the bacterial beta-glucuronidase (GUS) gene (uidA). Two insertion sites were assessed, either between P1 and HCPro cistrons or Pol and CP cistrons. In each construct, the junctions flanking the inserted gene coded for P1 and/or VPg-Pro cleavage recognition site sequences, to produce free GUS or GFP. After transfection by particle bombardment on Brassica perviridis, characteristic symptoms for TuMV infection appeared and Western blot analyses showed that GFP and GUS had been excised from the viral polyprotein. No significant differences in expression level were noticed between the two insertion sites. By RT-PCR, gfp was found to be stable over 30 days post-transfection (dpt) while uidA was gradually lost at 15 dpt. We also created two constructs containing either gene at each insertion sites on the same molecule. Attenuated systemic symptoms were observed after particle bombardment on B. perviridis and Western blot analyses showed that both foreign proteins were produced. Also, the same stability/instability as for the single-gene constructs were observed. These results indicate that it is possible to produce at least two foreign proteins simultaneously in a TuMV-based vector.

Gene stacking in transgenic plants--the challenge for 21st century plant biotechnology

One of the major technical hurdles impeding the advance of plant genetic engineering and biotechnology is the fact that the expression or manipulation of multiple genes in plants is still difficult to achieve. Although a small proportion of commercial genetically modified (GM) crops present 'stacked' or 'pyramided' traits, only a handful of products have been developed by introducing three or more novel genes. On the research front, a variety of conventional and more novel methods have been employed to introduce multiple genes into plants, but all techniques suffer from certain drawbacks. In this review, the potential and problems of these various techniques and strategies are discussed, and the prospects for improving these technologies in the future are presented.

Coordinate expression and independent subcellular targeting of multiple proteins from a single transgene

A variety of conventional methods allow the expression of multiple foreign proteins in plants by transgene stacking or pyramiding. However, most of these approaches have significant drawbacks. We describe a novel alternative, using a single transgene to coordinate expression of multiple proteins that are encoded as a polyprotein capable of dissociating into component proteins on translation. We demonstrate that this polyprotein system is compatible with the need to target proteins to a variety of subcellular locations, either cotranslationally or posttranslationally. It can also be used to coordinate the expression of selectable marker genes and effect genes or to link genes that are difficult to assay to reporter genes that are easily monitored. The unique features of this polyprotein system are based on the novel activity of the 2A peptide of Foot-and-mouth disease virus (FMDV) that acts cotranslationally to effect a dissociation of the polyprotein while allowing translation to continue. This polyprotein system has many applications both as a research tool and for metabolic engineering and protein factory applications of plant biotechnology.

Efficient linking and transfer of multiple genes by a multigene assembly and transformation vector system

Introduction and expression of multiple transgenes is frequently required for basic and applied studies. However, at present, multigene transformation is very difficult due to technical limitations of existing methods. Here, we describe a vector system for efficient multigene assembly and transformation. The system consists of a transformation-competent artificial chromosome (TAC)-based acceptor vector together with two donor vectors. By exploiting the CreloxP recombination system and homing endonucleases, multiple rounds of gene assembly cycling were carried out with alternate use of the donor vectors, and multiple genes were sequentially delivered into the TAC vector. With this system, we created constructs containing as many as 10 foreign DNA fragments. Multiple genes, including six resistant genes stacked in a construct, were transferred into rice genome by Agrobacterium-mediated transformation. This system extends the repertoire of molecular genetic studies and biotechnological endeavors by enabling simultaneous manipulation of multiple genes.

Multigene engineering: dawn of an exciting new era in biotechnology

Development of a rice variety enriched in provitamin A, the accumulation of polyhydroxybutyrate polyester in Arabidopsis nuclear transgenic plants (with enzymes targeted to chloroplasts in both), and the expression of bacterial operons via the chloroplast genome are recent landmark achievements in multigene engineering. Hyper-expression of transgenes has resulted in the formation of insecticidal protein crystals or inclusion bodies of pharmaceutical proteins in transgenic chloroplasts, achieving the highest level of transgene expression ever reported in transgenic plants. These achievements illustrate the potential of multigene engineering to realize benefits of the post-genomic revolution.

Assembly of two transgenes in an artificial chromatin domain gives highly coordinated expression in tobacco

The chromatin loop model predicts that genes within the same chromatin domain exhibit coordinated regulation. We here present the first direct experimental support for this model in plants. Two reporter genes, the E. coli beta-glucuronidase gene and the firefly luciferase gene, driven by different promoters, were placed between copies of the chicken lysozyme A element, a member of the matrix-associated region (MAR) group of chromatin boundary elements, and introduced in tobacco (Nicotiana tabacum). In plants carrying A elements, quantitative enzyme activities and mRNA levels of both genes show high correlations compared to control plants. The A element thus creates an artificial chromatin domain that yields coordinated expression. Surprisingly, enzyme activities correlated poorly with their respective mRNA levels. We hypothesize that this indicates the occurrence of "error pipelines" in data generation: systematic errors of a given analytical method will point in the same direction and cancel out in correlation analysis, resulting in better correlations. In combining different methods of analysis, however, such errors do not cancel out and as a result relevant correlations can be masked. Such error pipelines will have to be taken into account when different types of (e.g., whole-genome) data sets are combined in quantitative analyses.

α-Galactosidase is synthesized in tomato seeds during development and is localized in the protein storage vacuoles

The localization of the enzyme α-galactosidase (EC 3.2.1.22) was investigated during its synthesis in developing tomato (Lycopersicon esculentum Mill.) cv. Trust seeds. This enzyme is also present in germinating seeds, where it is involved in the mobilization of carbohydrate reserves during and following seed germination. Subcellular fractionation of developing tomato seeds revealed that there is a cosedimentation between α-galactosidase activity and protein storage vacuoles in a density gradient, which is dependent upon the presence of membranes. A second approach to localizing this enzyme involved the transient transformation of protoplasts from developing tomato seeds. A reporter construct, coding for tomato α-galactosidase, fused N-terminally to the bacterial enzyme chloramphenicol acetyltransferase was used for transient expression. Immunofluorescence microscopy revealed a colocalization between the α-galactosidase - chloramphenicol acetyltransferase fusion protein and the α-tonoplast intrinsic protein, and a partial colocalization with the dark intrinsic protein (both vacuolar proteins). These data indicate that the protein storage vacuole is the intracellular location for α-galactosidase in developing tomato seeds.Key words: α-galactosidase, protein storage vacuole, seed development, seed protoplasts, tomato, tonoplast intrinsic protein.

Bidirectionalization of polar promoters in plants

A typical eukaryotic promoter consists of a minimal promoter and other upstream cis elements. The minimal promoter is essentially a TATA box region where RNA polymerase II, TATA-binding protein (TBP), and TBP-associated factors (TAFs) bind to initiate transcription, but minimal promoters alone have no transcriptional activity. The cis elements, to which tissue-specific or development-specific transcription factors bind, individually or in combination, determine the spatio-temporal expression pattern of a promoter at the transcriptional level. The arrangement of upstream cis elements followed by a minimal promoter sets the polarity of the promoter. Promoters in plants that have been cloned and widely used for both basic research and biotechnological application are generally unidirectional, directing only one gene that has been fused at its 3' end (downstream). It is often necessary to introduce multiple genes into plants for metabolic engineering and trait stacking. It is also desirable to minimize or avoid repeated use of a single promoter that may cause transcriptional gene silencing. Here we describe a strategy to make polar promoters bidirectional so that one promoter can direct the expression of two genes, one on each end of the promoter.

Engineering chloroplasts: an alternative site for foreign genes, proteins, reactions and products

Plant genetic engineering via the nucleus is a mature technology that has been used very productively for research and commercial biotechnology. By contrast, the ability to introduce foreign genes at specific locations on a chloroplast's chromosome has been acquired relatively recently. Certain limitations of nuclear genome transformation methods might be overcome by the site-specific introduction of genes into plastid chromosomes. In addition, plastids, mitochondria and other subcellular organelles might provide more favorable environments than the nuclear-cytoplasmic compartment for certain biochemical reactions and for accumulating large amounts of some gene and enzyme products.