Controlling silk fibroin conformation for dynamic, responsive, multifunctional, micropatterned surfaces

Light-Controlled Mechanical Self-Assembly for Programmable Surface Micro-Nano Patterning

Mechanical self-assembly is a novel manufacturing principle for programmable surface micro-nano patterning, which can be accurately triggered by interface stress mismatch-induced surface instability and regulated by high-precision boundary constraints. However, existing mechanical self-assembly fabrication strategies for micro-nano surface patterns face challenges in microfabrication compatibility and industrial repeatability. Here, a microfabrication-compatible light-controlled mechanical self-assembly is proposed for programmable and industrially standardized micro-nano surface patterning. By introducing light-controlled high spatial resolution soft-constraint boundaries and surface instability-induced mechanical self-assembly into film/substrate systems, a develop-free and industrially standardized manufacturing process with microfabrication compatibility is demonstrated. Moreover, trans-scale patterns spanning from 5 to 1000µm, 2D highly-ordered patterns, and dynamic patterns mimicking Chinese pandas eating bamboo are achieved. Design criteria for programmablely fabricating trans-scale patterns and the mechanical mechanism of orderliness evolutions in 2D self-assembly under arbitrary exposure angles are explained. Furthermore, by applying the highly-ordered micro-nano patterns, a new self-adaptive wideband gas detection system based on tunable micro-gratings is developed and methane is detected. This study can advance strategies for programmable surface micro-nano patterns and lay the foundation for the applications of surface functional devices.

Using a Functional Wool Keratin Photoresist to Build Iridescent and Fluorescent 3D Micro-Pattern for Dual-Mode Optical Anti-Counterfeiting

The construction of bio-nanostructures plays a critical role in the advancement of applications across bioelectronics, bio-optical devices, and biomedicine. Among various fabrication techniques, soft lithography emerges as an efficient and scalable method for producing high-quality intricate surface micropatterns. Herein, a mild and aqueous approach is developed to endow biocompatible wool keratin (WK) with photoresponsiveness; and utilize the gold nanoclusters (AuNCs) incorporated functional bio-photoresist to build iridescent and fluorescent micrometer-scale patterns for dual-mode optical anti-counterfeiting. Specifically, the chemical modification of WK is achieved by using glycidyl methacrylate under mild conditions. And then, the modified WK can function as a green bio-photoresist, which can be cross-linked via UV light-initiated radical polymerization. By combining soft lithography, both positive and negative 3D WK micro-patterns with stability, biocompatibility, and controlled degradability can be facilely fabricated. Notably, the obtained periodic microstructures exhibit typical iridescent behavior with an excellent diffraction efficiency. Interestingly, by using WK as both a reductant and a stabilizer, the AuNCs functional WK resist with significant fluorescence response can be in situ generated. More importantly, through the skillful combination of iridescent micro-patterns and fluorescence, the WK/AuNCs-based hybrid micro-patterns can be further used for dual-mode optical anti-counterfeiting, which can significantly enhance information storage and encryption security.

Autonomous Bioelectronic Devices Based on Silk Fibroin

The development of autonomous bioelectronic devices capable of dynamically adapting to changing biological environments represents a significant advancement in healthcare and wearable technologies. Such systems draw inspiration from the precision, adaptability, and self-regulation of biological processes, requiring materials with intrinsic versatility and seamless bio-integration to ensure biocompatibility and functionality over time. Silk fibroin (SF) derived from Bombyx mori cocoons, has emerged as an ideal biomaterial with a unique combination of biocompatibility, mechanical flexibility, and tunable biodegradability. Adding autonomous features into SF, including self-healing, shape-morphing, and controllable degradation, enables dynamic interactions with living tissues while minimizing immune responses and mechanical mismatches. Additionally, structural tunability and environmental sustainability of SF further reinforce its potential as a platform for adaptive implants, epidermal electronics, and intelligent textiles. This review explores recent progress in understanding the structure-property relationships of SF, its modification strategies, and its great potential for integration into advanced autonomous bioelectronic systems while addressing challenges related to scalability, reproducibility, and multifunctionality. Future opportunities, such as AI-assisted material design, scalable fabrication techniques, and the incorporation of wireless and personalized technologies, are also discussed, positioning SF as a key material in bridging the gap between biological systems and artificial technologies.

Irreproducible SEBS wrinkling based on spin evaporation enabling identifiable artificial finger pad electronics

Irreproducible wrinkling, characterized by randomly arranged ridges or creases on material surfaces, has significant potential for application in entity identification and anti-counterfeiting. However, active research in this field is hindered because the existing wrinkling methods face challenges in realizing discernible patterns and potential applications of submillimeter-scale wavelength wrinkles are yet to be identified. Herein, we propose a strategy to create unique and irreproducible styrene-ethylene-butylene-styrene (SEBS) wrinkles using "spin evaporation", a technique that rapidly removes the solvent by spinning. We demonstrate the realization of SEBS wrinkles with wavelengths of hundreds of micrometers with high randomness, irreproducibility, and resistance to external stimuli. Importantly, to demonstrate the potential application of the wrinkle, we suggest and fabricate a human-finger-like fully soft identifiable artificial finger pad electronics and integrate it with a soft bimodal sensing system. The artificial finger pad mimics human finger pad features such as identification, object recognition, and effective grasping. Further integration of this pad into soft robots, cephalopods, and prosthetic skin offers insightful potential for the proposed wrinkling method in various fields.

Silk Fibroin Surface Engineering Using Phase Separation Approaches for Enhanced Cell Adhesion and Proliferation

Due to excellent mechanical properties and biocompatibility, materials based on silk fibroin are increasingly included in advanced biomedical research and applications. However, their poor supporting properties for cell adhesion and proliferation represent limiting factors of the utilization. To eliminate this deficiency, we developed a series of phase-separation approaches allowing for tunable texturing of planar and 3D printed fibroin surfaces from nano to macro levels. The formation of surface structures presented is based on a combination of good and poor solvents, whereas no potentially problematic templates or additives, diminishing biocompatibility of the resulting material, are required. A critical factor in obtaining and scaling of the textures is control over the degree of transformation of fibroin secondary structures between prevalently amorphous Silk I and semicrystalline Silk II forms before and during surface treatment. Employing a set of optimized procedures, selectively or hierarchically structured fibroin surfaces can be prepared at the nano, micro, and macro level, which are characterized by long-term stability in physiological environments, allowing enhanced adhesion and proliferation of human keratinocytes as well as skin fibroblast cultivations.

Natural biomaterials for sustainable flexible neuromorphic devices

Neuromorphic electronics use neural models in hardware to emulate brain-like behavior, and provide power-efficient, extremely compact, and massively-parallel processing, so they are ideal candidates for next-generation information-processing units. However, traditional rigid neuromorphic devices are limited by their unavoidable mechanical and geometrical mismatch with human tissues or organs. At the same time, the rapid development of these electronic devices has generated a large amount of electronic waste, thereby causing severe ecological problems. Natural biomaterials have mechanical properties compatible with biological tissues, and are environmentally benign, ultra-thin, and lightweight, so use of these materials can address these limitations and be used to create next-generation sustainable flexible neuromorphic electronics. Here, we explore the advantages of natural biomaterials in simulating synaptic behavior of sustainable neuromorphic devices. We present the flexibility, biocompatibility, and biodegradability of these neuromorphic devices, and consider the potential applicability of these properties in wearable and implantable bioelectronics. Finally, we consider the challenges of device fabrication and neuromorphic system integration by natural biomaterials, then suggest future research directions.

Designing Silk Biomaterials toward Better Future Healthcare: The Development and Application of Silk-Based Implantable Electronic Devices in Clinical Diagnosis and Therapy

Implantable medical electronic devices (IMEDs) have attracted great attention and shown versatility for solving clinical problems ranging from real-time monitoring of physiological/ pathological states to electrical stimulation therapy and from monitoring brain cell activity to deep brain stimulation. The ongoing challenge is to select appropriate materials in target device configuration for biomedical applications. Currently, silk-based biomaterials have been developed for the design of diagnostic and therapeutic electronic devices due to their excellent properties and abundant active sites in the structure. Herein, the aim is to summarize the structural characteristics, physicochemical properties, and bioactivities of natural silk biomaterials as well as their derived materials, with a particular focus on the silk-based implantable biomedical electronic devices, such as implantable devices for invasive brain-computer interfaces, neural recording, and in vivo electrostimulation. In addition, future opportunities and challenges are also envisioned, hoping to spark the interests of researchers in interdisciplinary fields such as biomaterials, clinical medicine, and electronics.

Chemical and temporal manipulation of early steps in protein assembly tunes the structure and intermolecular interactions of protein-based materials

The Drosophila intrinsically disordered protein Ultrabithorax (Ubx) undergoes a series of phase transitions, beginning with noncovalent interactions between apparently randomly organized monomers, and evolving over time to form increasingly ordered coacervates. This assembly process ends when specific dityrosine covalent bonds lock the monomers in place, forming macroscale materials. Inspired by this hierarchical, multistep assembly process, we analyzed the impact of protein concentration, assembly time, and subphase composition on the early, noncovalent stages of Ubx assembly, which are extremely sensitive to their environment. We discovered that in low salt buffers, we can generate a new type of Ubx material from early coacervates using 5-fold less protein, and 100-fold less assembly time. Comparison of the new materials with standard Ubx fibers also revealed differences in the extent of wrinkling on the fiber surface. A new image analysis technique based on autocorrelation of scanning electron microscopy (SEM) images was developed to quantify these structural differences. These differences extend to the molecular level: new materials form more dityrosine covalent cross-links per monomer, but without requiring the specific tyrosine residues necessary for crosslinking previously established materials. We conclude that varying the assembly conditions represents a facile and inexpensive process for creating new materials. Most new biopolymers are created by changing the composition of the monomers or the method used to drive assembly. In contrast, in this study we used the same monomers and assembly approach, but altered the assembly time and chemical environment to create a new material with unique properties.

Recording and Revealing 2.5D Nanopatterned Hidden Information on Silk Protein Bioresists

Nanopatterning on biomaterials has attracted significant attention as it can lead to the development of biomedical devices capable of performing diagnostic and therapeutic functions while being biocompatible. Among various nanopatterning techniques, electron-beam lithography (EBL) enables precise and versatile nanopatterning in desired shapes. Various biomaterials are successfully nanopatterned as bioresists by using EBL. However, the use of high-energy electron beams (e-beams) for high-resolutive patterning has incorporated functional materials and has caused adverse effects on biomaterials. Moreover, the scattering of electrons not absorbed by the bioresist leads to proximity effects, thus deteriorating pattern quality. Herein, EBL-based nanopatterning is reported by inducing molecular degradation of amorphous silk fibroin, followed by selectively inducing secondary structures. High-resolution EBL nanopatterning is achievable, even at low-energy e-beam (5 keV) and low doses, as it minimizes the proximity effect and enables precise 2.5D nanopatterning via grayscale lithography. Additionally, integrating nanophotonic structures into fluorescent material-containing silk allows for fluorescence amplification. Furthermore, this post-exposure cross-linking way indicates that the silk bioresist can maintain nanopatterned information stored in silk molecules in the amorphous state, utilizing for the secure storage of nanopatterned information as a security patch. Based on the fabrication technique, versatile biomaterial-based nanodevices for biomedical applications can be envisioned.

Stimuli-responsive mechanically interlocked polymer wrinkles

Artificial wrinkles, especially those with responsive erasure/regeneration behaviors have gained extensive interest due to their potential in smart applications. However, current wrinkle modulation methods primarily rely on network rearrangement, causing bottlenecks in in situ wrinkle regeneration. Herein, we report a dually cross-linked network wherein [2]rotaxane cross-link can dissipate stress within the wrinkles through its sliding motion without disrupting the network, and quadruple H-bonding cross-link comparatively highlight the advantages of [2]rotaxane modulation. Acid stimulation dissociates quadruple H-bonding and destructs network, swiftly eliminating the wrinkles. However, the regeneration process necessitates network rearrangement, making in situ recovery unfeasible. By contrast, alkaline stimulation disrupts host-guest recognition, and subsequent intramolecular motion of [2]rotaxane dissipate energy to eliminate wrinkles gradually. The always intact network allows for the in situ recovery of surface microstructures. The responsive behaviors of quadruple H-bonding and mechanical bond are orthogonal, and their combination leads to wrinkles with multiple but accurate responsiveness.

Dry and wet wrinkling of a silk fibroin biopolymer by a shape-memory material with insight into mechanical effects on secondary structures in the silk network

Surface wrinkling provides an approach to modify the surfaces of biomedical devices to better mimic features of the extracellular matrix and guide cell attachment, proliferation, and differentiation. Biopolymer wrinkling on active materials holds promise but is poorly explored. Here we report a mechanically actuated assembly process to generate uniaxial micro-and nanosized silk fibroin (SF) wrinkles on a thermo-responsive shape-memory polymer (SMP) substrate, with wrinkling demonstrated under both dry and hydrated (cell compatible) conditions. By systematically investigating the influence of SMP programmed strain magnitude, film thickness, and aqueous media on wrinkle stability and morphology, we reveal how to control the wrinkle sizes on the micron and sub-micron length scale. Furthermore, as a parameter fundamental to SMPs, we demonstrate that the temperature during the recovery process can also affect the wrinkle characteristics and the secondary structures in the silk network. We find that with increasing SMP programmed strain magnitude, silk wrinkled topographies with increasing wavelengths and amplitudes are achieved. Furthermore, silk wrinkling is found to increase β-sheet content, with spectroscopic analysis suggesting that the effect may be due primarily to tensile (e.g., Poisson effect and high-curvature wrinkle) loading modes in the SF, despite the compressive bulk deformation (uniaxial contraction) used to produce wrinkles. Silk wrinkles fabricated from sufficiently thick films (roughly 250 nm) persist after 24 h in cell culture medium. Using a fibroblast cell line, analysis of cellular response to the wrinkled topographies reveals high viability and attachment. These findings demonstrate use of wrinkled SF films under physiologically relevant conditions and suggest the potential for biopolymer wrinkles on biomaterials surfaces to find application in cell mechanobiology, wound healing, and tissue engineering.

Tuning the Topography of Dynamic 3D Scaffolds through Functional Protein Wrinkled Coatings

Surface wrinkling provides an approach to fabricate micron and sub-micron-level biomaterial topographies that can mimic features of the dynamic, in vivo cell environment and guide cell adhesion, alignment, and differentiation. Most wrinkling research to date has used planar, two-dimensional (2D) substrates, and wrinkling work on three-dimensional (3D) structures has been limited. To enable wrinkle formation on architecturally complex, biomimetic 3D structures, here, we report a simple, low-cost experimental wrinkling approach that combines natural silk fibroin films with a recently developed advanced manufacturing technique for programming strain in complex 3D shape-memory polymer (SMP) scaffolds. By systematically investigating the influence of SMP programmed strain magnitude, silk film thickness, and aqueous media on wrinkle morphology and stability, we reveal how to generate and tune silk wrinkles on the micron and sub-micron scale. We find that increasing SMP programmed strain magnitude increases wavelength and decreases amplitudes of silk wrinkled topographies, while increasing silk film thickness increases wavelength and amplitude. Silk wrinkles persist after 24 h in cell culture medium. Wrinkled topographies demonstrate high cell viability and attachment. These findings suggest the potential for fabricating biomimetic cellular microenvironments that can advance understanding and control of cell-material interactions in engineering tissue constructs.

Stepless IR Chromism in Ti3 C2 Tx MXene Tuned by Interlayer Water Molecules

Real-time control over infrared (IR) radiation of objects is highly desired in a variety of areas such as personal thermal regulation and IR camouflage. This requires the dynamic modulation of IR emissivity in a stepless manner over a wide range (>50%), which remains a daunting challenge. Here, an emissivity modulation phenomenon is reported in stacked 2D Ti3 C2 Tx MXene nanosheets, from 12% to 68% as the intercalation/discharging of water molecules within the interlayers. The intercalation of water molecules dynamically changes the electronic properties and the complex permittivity in IR frequencies of Ti3 C2 Tx . This emissivity modulation is a stepless and reversible process without the assistance of any external energy input. Further, intercalating cellulose nanofibers into the Ti3 C2 Tx interlayers makes this dynamic process highly repeatable. Last, a sweat-responsive adaptive textile that can improve thermal comfort of human body under changes in metabolic rates and environmental conditions is demonstrated, showing great potential of this mechanism in passive on-demand radiation modulation.

MXene-Integrated Silk Fibroin-Based Self-Assembly-Driven 3D-Printed Theragenerative Scaffolds for Remotely Photothermal Anti-Osteosarcoma Ablation and Bone Regeneration

Aiming to address the bone regeneration and cancer therapy functionalities in one single material, in this study, we developed a dual-functional theragenerative three-dimensional (3D) aerogel-based composite scaffold from hybridization of photo-cross-linked silk fibroin (SF) biopolymer with MXene (Ti3C2) two-dimensional (2D) nanosheets. To fabricate the scaffold, we first develop a dual-cross-linked SF-based aerogel scaffold through 3D printing and photo-cross-linking of the self-assembly-driven methacrylate-modified SF (SF-MA) gel with controlled pore size, macroscopic geometry, and mechanical stability. In the next step, to endow a remotely controlled photothermal antiosteosarcoma ablation function to fabricated aerogel scaffold, MXene 2D nanosheets with strong near-infrared (NIR) photon absorption properties were integrated into the 3D-printed scaffolds. While 3D-printed MXene-modified dual-cross-linked SF composite scaffolds can mediate the in vitro growth and proliferation of preosteoblastic cell lines, they also endow a strong photothermal effect upon remote irradiation with NIR laser but also significantly stimulate bone mineral deposition on the scaffold surface. Additionally, besides the local release of the anticancer model drug, the generated heat (45-53 °C) mediated the photothermal ablation of cancer cells. The developed aerogel-based composites and chosen therapeutic techniques are thought to render a significant breakthrough in biomaterials' future clinical applications.

Bimodal Gating Mechanism in Hybrid Thin-Film Transistors Based on Dynamically Reconfigurable Nanoscale Biopolymer Interfaces

In recent years, increased control over naturally derived structural protein formulations and their self-assembly has enabled the application of high-resolution manufacturing techniques to silk-based materials, leading to bioactive interfaces with unprecedented miniaturized formats and functionalities. Here, a hybrid biopolymer-semiconductor device, obtained by integrating nanoscale silk layers in a well-established class of inorganic field-effect transistors (silk-FETs), is presented. The devices offer two distinct modes of operation-either traditional field-effect or electrolyte-gated-enabled by the precisely controlled thickness, morphology, and biochemistry of the integrated silk layers. The different operational modes are selectively accessed by dynamically modulating the free-water content within the nanoscale protein layer from the vapor phase. The utility of these hybrid devices is illustrated in a highly sensitive and ultrafast breath sensor, highlighting the opportunities offered by the integration of nanoscale biomaterial interfaces in conjunction with traditional semiconductor devices, enabling functional outcomes at the intersection between the worlds of microelectronics and biology.

Transfer-Printing Hydrogel-Based Platform for Moisture-Driven Dynamic Display and Optical Anti-Counterfeiting

Humidity-responsive materials offer a promising approach to achieving tunable metasurface systems due to their fast and reversible swelling responses to moisture, which enables many important applications, such as real-time humidity sensing, optical switches, dynamic displays, and optical information encryption. However, the humidity-responsive structural coloration generally cannot provide a high spatial resolution and requires a complex patterning process. Here, we present a scalable moisture-driven color-changing Fabry-Pérot (FP)-like cavity composed of a polyvinyl alcohol layer sandwiched between an upper gold nanoparticles assembly and a bottom gold mirror. Through nanoparticle contact printing, we pixelated these cavities with sub-micrometer sizes without crosstalk and achieved an ultrahigh display resolution of ∼400 nm. Meanwhile, these nanoparticle-based FP (NBFP) cavities exhibit more vibrant colors than those of conventional film-based ones due to broadband absorption of the disordered nanoparticle assembly. Moreover, the NBFP cavities exhibit a rapid response (<300 ms), benefiting from the membrane pores formed in the gaps between the adjacent nanoparticles. Finally, we demonstrated the applications of the NBFP cavities in optical anti-counterfeiting and dynamic multi-color printing. These results suggest that our approach will help to realize a colorful, fast, and ultrahigh-resolution dynamic display device in optical security and colorimetric sensing.

Silk wastes and autoclaved degumming as an alternative for a sustainable silk process

Silk degumming is considered the first point in the preparation of silk-based materials since this process could modify the silk fiber and the properties of its related products. This study evaluated the differences in morphology, secondary structure, amino acid content, thermal stability, and mechanical properties of two types of raw materials, defective cocoons (DC) and silk fibrous waste (SW), degummed by chemical (C) and autoclaving (A) methods. Subsequently, silk fibroin films were prepared by dissolving each type of degummed fibers, and thermal and structural films properties were determined. The findings demonstrated that autoclaving is an efficient alternative to remove silk sericin, as the resulting fibers presented improved structural, thermal, and mechanical properties compared to those obtained by the chemical method. For films preparation, autoclave resulted in a good option, but dissolution parameters need to be adjusted for defective cocoons. Furthermore, similarities between the physicochemical properties of fibers and films from both fibrous wastes suggest that SW is a promising raw material for producing fibrous resources and regenerated silk fibroin materials. Overall, these findings suggest new recycling methods for fibrous waste and by-products generated in the silk textile production process.

Manipulating supramolecular gels with surfactants: Interfacial and non-interfacial mechanisms

Gel is a class of self-supporting soft materials with applications in many fields. Fast, controllable gelation, micro/nano structure and suitable rheological properties are essential considerations for the design of gels for specific applications. Many methods can be used to control these parameters, among which the additive approach is convenient as it is a simple physical mixing process with significant advantages, such as avoidance of pH change and external energy fields (ultrasound, UV light and others). Although surfactants are widely used to control the formation of many materials, particularly nanomaterials, their effects on gelation are less known. This review summarizes the studies that utilized different surfactants to control the formation, structure, and properties of molecular and silk fibroin gels. The mechanisms of surfactants, which are interfacial and non-interfacial effects, are classified and discussed. Knowledge and technical gaps are identified, and perspectives for further research are outlined. This review is expected to inspire increasing research interest in using surfactants for designing/fabricating gels with desirable formation kinetics, structure, properties and functionalities.

Design of Biodegradable, Climate-Specific Packaging Materials That Sense Food Spoilage and Extend Shelf Life

The AgriFood systems in tropical climates are under strain due to a rapid increase in human population and extreme environmental conditions that limit the efficacy of packaging technologies to extend food shelf life and guarantee food safety. To address these challenges, we rationally designed biodegradable packaging materials that sense spoilage and prevent molding. We nanofabricated the interface of 2D covalent organic frameworks (COFs) to reinforce silk fibroin (SF) and obtain biodegradable membranes with augmented mechanical properties and that displayed an immediate colorimetric response (within 1 s) to food spoilage, using packaged poultry as an example. Loading COF with antimicrobial hexanal also mitigated biotic spoilage in high-temperature and -humidity conditions, resulting in a four-order of magnitude decrease in the total amount of mold growth in soybeans packaged in silk-COF, when compared to cling film (i.e., polyethylene). Together, the integration of sensing, structural reinforcement, and antimicrobial agent delivery within a biodegradable nanocomposite framework defines climate-specific packaging materials that can decrease food waste and enhance food safety.

Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy

Multifunctional all-in-one biomaterial combining the therapeutic and regeneration functionalities for successive tumor therapy and tissue regeneration is in high demand in interdisciplinary research. In this study, a three-dimensional (3D) aerogel-based composite scaffold with a dual-network structure generated through self-assembly and photo-cross-linking with combined properties of photothermally triggered controlled anticancer drug release and photothermal cancer cell ablation was successfully fabricated. The fabrication of composites consists of self-assembly of a silk fibroin methacrylate (SF-MA) biopolymer incorporated with hydrothermally driven bismuth sulfide (Bi₂S₃) methacrylate nanobelts, followed by a photo-cross-linking-assisted 3D-printing process. The developed scaffolds presented hierarchically organized porosity and excellent photothermal conversion thanks to the strong near-infrared (NIR) photon absorption of incorporated Bi₂S₃ nanobelts inside the scaffold matrix. The heat generated in the scaffold mediated by laser irradiation has not only triggered controlled and prolonged release of the anticancer drug but also significantly ablated the bone cancer cells adhered on the scaffold. In addition, the developed 3D composite scaffolds have demonstrated excellent biodegradability for organic and inorganic network constituents at different media, enabling them as potential implants to be replaced by de novo tissue. In combination of chemotherapy and photothermal therapy, the multifunctional 3D-printed composite aerogel scaffold is expected to be an excellent implantable material in bone tissue engineering (BTE) for successive cancer therapy and tissue regeneration.

Reshaping de Novo Protein Switches into Bioresponsive Materials for Biomarker, Toxin, and Viral Detection

De novo designed protein switches are powerful tools to specifically and sensitively detect diverse targets with simple chemiluminescent readouts. Finding an appropriate material host for de novo designed protein switches without altering their thermodynamics while preserving their intrinsic stability over time would enable the development of a variety of sensing formats to monitor exposure to pathogens, toxins, and for disease diagnosis. Here, a de novo protein-biopolymer hybrid that maintains the detection capabilities induced by the conformational change of the incorporated proteins in response to analytes of interest is generated in multiple, shelf-stable material formats without the need of refrigerated storage conditions. A set of functional demonstrator devices including personal protective equipment such as masks and laboratory gloves, free-standing films, air quality monitors, and wearable devices is presented to illustrate the versatility of the approach. Such formats are designed to be responsive to human epidermal growth factor receptor (HER2), anti-hepatitis B (HBV) antibodies, Botulinum neurotoxin B (BoNT/B), and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). This combination of form and function offers wide opportunities for ubiquitous sensing in multiple environments by enabling a large class of bio-responsive interfaces of broad utility.

Highly stretchable porous regenerated silk fibroin film for enhanced wound healing

Silk fibroin (SF) has received interest in tissue engineering owing to its biocompatibility, biodegradability, and favorable mechanical properties. However, the complex preparation, brittleness, and lack of pores in the structure of the silk fibroin film limit its application. Herein, we show that facile dissolution of SF in aqueous phosphoric acid followed by regeneration in aqueous ammonium sulfate ((NH₄)₂SO₄) could afford highly stretchable films with nano-pores formed in the nonsolvent-induced phase separation process. The named phase separation, which determines the morphology and mechanical properties of the regeneration silk fibroin (RSF) films, is highly dependent on the (NH₄)₂SO₄ concentration as well as the initial concentration of the SF solution. Therefore, the RSF films exhibit a tunable pore size ranging from 230 to 510 nm and excellent stretchability with tensile strain up to 143 ± 16%. Most interestingly, the RSF films were shown to support the proliferation of human skin fibroblasts in vitro as well as speed up full-thickness skin wound healing in a rat model. This work establishes an easy and feasible method to access porous RSF membranes that can be used for wound dressing in clinical settings.

Smart Polymer Surfaces with Complex Wrinkled Patterns: Reversible, Non-Planar, Gradient, and Hierarchical Structures

This review summarizes the relevant developments in preparing wrinkled structures with variable characteristics. These include the formation of smart interfaces with reversible wrinkle formation, the construction of wrinkles in non-planar supports, or, more interestingly, the development of complex hierarchically structured wrinkled patterns. Smart wrinkled surfaces obtained using light-responsive, pH-responsive, temperature-responsive, and electromagnetic-responsive polymers are thoroughly described. These systems control the formation of wrinkles in particular surface positions and the reversible construction of planar-wrinkled surfaces. This know-how of non-planar substrates has been recently extended to other structures, thus forming wrinkled patterns on solid, hollow spheres, cylinders, and cylindrical tubes. Finally, this bibliographic analysis also presents some illustrative examples of the potential of wrinkle formation to create more complex patterns, including gradient structures and hierarchically multiscale-ordered wrinkles. The orientation and the wrinkle characteristics (amplitude and period) can also be modulated according to the requested application.

A Silk-Based Platform to Stabilize Phenylalanine Ammonia-lyase for Orally Administered Enzyme Replacement Therapy

Phenylalanine ammonia-lyase (PAL) has gained attention in recent years for the treatment of phenylketonuria (PKU), a genetic disorder that affects ∼1 in 15 000 individuals globally. However, the enzyme is easily degraded by proteases, unstable at room temperature, and currently administered in PKU patients as daily subcutaneous injections. We report here the stabilization of the PAL from Anabaena variabilis, which is currently used to formulate pegvaliase, through incorporation in a silk fibroin matrix. The combination with silk stabilizes PAL at 37 °C. In addition, in vitro studies showed that inclusion in a silk matrix preserves the biological activity of the enzyme in simulated intestinal fluid, which will enable oral administration of PAL to treat PKU.

Regulation of the Inevitable Water-Responsivity of Silk Fibroin Biopolymer by Polar Amino Acid Activation

In nature, water is vital for maintaining homeostasis. Particularly, organisms (e.g., plant leaf, bird feather) exploit water fluidics for motions. Hydration-adaptive crystallization is the representative water-responsive actuation of biopolymers. This crystallization has inspired the development of intelligent human-robot interfaces. At the same time, it hinders the consistent adhesion of tissue adhesive. As hydration-adaptive crystallization is inevitable, the on-demand control of crystallization is desirable in the innovative biopolymeric biomedical systems. To this end, this study developed an amino acid-based technology to artificially up- or down-regulate the inevitable crystallization of silk fibroin. A case II diffusion model was constructed, and it revealed that the activity of polar amino acid is related to crystallization kinetics. Furthermore, the water dynamics study suggested that active amino acid stabilizes crystallization-triggering water molecules. As a proof-of-concept, we verified that a 30% increase in the activity of serine resulted in a 50% decrease in the crystallization rate. Furthermore, the active amino acid-based suppression of hydration-adaptive crystallization enabled the silk fibroin to keep its robust adhesion (approximately 160 kJ m^-3) by reducing the water-induced loss of adhesive force. The proposed silk fibroin was demonstrated as a stable tissue adhesive applied on ex vivo porcine mandible tissue. This amino acid-based regulation of hydration-adaptive crystallization will pioneer next-generation biopolymer-based healthcare.

Surface Wrinkling for Flexible and Stretchable Sensors

Recent advances in nanolithography, miniaturization, and material science, along with developments in wearable electronics, are pushing the frontiers of sensor technology into the large-scale fabrication of highly sensitive, flexible, stretchable, and multimodal detection systems. Various strategies, including surface engineering, have been developed to control the electrical and mechanical characteristics of sensors. In particular, surface wrinkling provides an effective alternative for improving both the sensing performance and mechanical deformability of flexible and stretchable sensors by releasing interfacial stress, preventing electrical failure, and enlarging surface areas. In this study, recent developments in the fabrication strategies of wrinkling structures for sensor applications are discussed. The fundamental mechanics, geometry control strategies, and various fabricating methods for wrinkling patterns are summarized. Furthermore, the current state of wrinkling approaches and their impacts on the development of various types of sensors, including strain, pressure, temperature, chemical, photodetectors, and multimodal sensors, are reviewed. Finally, existing wrinkling approaches, designs, and sensing strategies are extrapolated into future applications.

Self-assembled liquid crystal architectures for soft matter photonics

Self-assembled architectures of soft matter have fascinated scientists for centuries due to their unique physical properties originated from controllable orientational and/or positional orders, and diverse optic and photonic applications. If one could know how to design, fabricate, and manipulate these optical microstructures in soft matter systems, such as liquid crystals (LCs), that would open new opportunities in both scientific research and practical applications, such as the interaction between light and soft matter, the intrinsic assembly of the topological patterns, and the multidimensional control of the light (polarization, phase, spatial distribution, propagation direction). Here, we summarize recent progresses in self-assembled optical architectures in typical thermotropic LCs and bio-based lyotropic LCs. After briefly introducing the basic definitions and properties of the materials, we present the manipulation schemes of various LC microstructures, especially the topological and topographic configurations. This work further illustrates external-stimuli-enabled dynamic controllability of self-assembled optical structures of these soft materials, and demonstrates several emerging applications. Lastly, we discuss the challenges and opportunities of these materials towards soft matter photonics, and envision future perspectives in this field.

Strain-ultrasensitive surface wrinkles for visual optical sensors

Wearable tactile sensors have found widespread applications in human health monitoring, motion monitoring, human-machine interactions, and artificial prostheses. Herein, we demonstrate a new and feasible strategy for wearable optical sensors based on surface wrinkles that are ultrasensitive to strain using a bilayer wrinkling system, in which the relevance between strain and the optical signal can be founded on surface wrinkles. The strain (S⃑(ε, θ_S)), the wrinkled topography (W⃑(A, θ_W)), and the reflected optical signal (O⃑(δ, θ_O)) are correlated with each other, allowing simultaneous measurement of the strain magnitude and direction due to the vector property of optical signals. In addition, interactively visualized detection of slight strain has been achieved by a conspicuous structural color change, successfully amplifying the strain signal owing to the ultra-sensitivity of wrinkles and the nonlinearity of the optical signal. The sensor also exhibits electrical safety and immunity to electromagnetic interference and thus may find potential applications in detecting various complex slight strains, such as subtle human motion or object deformation.

Ultrasonic-Assisted Deposition Method for Creating Conductive Wrinkles on PDMS Surfaces

Harnessing surface wrinkle surfaces in various functional devices has been a hot topic. However, rapidly creating wrinkled surfaces on elastomers of arbitrary shape (especially curved surfaces) is still a great challenge. In this work, an ultrasonic-assisted deposition method has been proposed to achieve nanomodification of the robust layer (e.g., carbon nanotubes (CNTs)) with a labyrinth wrinkle pattern on polydimethylsiloxane (PDMS) fiber, sheet, and porous sponge. It is found that the swelling effect of the dispersion and the ultrasonic treatment play vital roles in the surface wrinkling. As a demonstration, the conductive wrinkled CNTs@PDMS fibers were assembled as stretchable strain sensors. The initial conductivity and the strain-sensing performances could be well tuned by simply adjusting the ultrasonic treatment time. The wrinkled CNTs@PDMS fiber strain sensor exhibited remarkable stretchability (ca. 300%) and good sensitivity, which can be applied in various human motion detection, voice recognition, and air-flow monitoring. It is also expected that the facile ultrasonic-assisted deposition method for surface wrinkling can be extended to fabricate various smart devices with promoted performances.

Synergy between silk fibroin and ionic liquids for active gas-sensing materials

Silk fibroin is a biobased material with excellent biocompatibility and mechanical properties, but its use in bioelectronics is hampered by the difficult dissolution and low intrinsic conductivity. Some ionic liquids are known to dissolve fibroin but removed after fibroin processing. However, ionic liquids and fibroin can cooperatively give rise to functional materials, and there are untapped opportunities in this combination. The dissolution of fibroin, followed by gelation, in designer ionic liquids from the imidazolium chloride family with varied alkyl chain lengths (2-10 carbons) is shown here. The alkyl chain length of the anion has a large impact on fibroin secondary structure which adopts unconventional arrangements, yielding robust gels with distinct hierarchical organization. Furthermore, and due to their remarkable air-stability and ionic conductivity, fibroin ionogels are exploited as active electrical gas sensors in an electronic nose revealing the unravelled possibilities of fibroin in soft and flexible electronics.

Sustainable Natural Bio-Origin Materials for Future Flexible Devices

Flexible devices serve as important intelligent interfaces in various applications involving health monitoring, biomedical therapies, and human-machine interfacing. To address the concern of electronic waste caused by the increasing usage of electronic devices based on synthetic polymers, bio-origin materials that possess environmental benignity as well as sustainability offer new opportunities for constructing flexible electronic devices with higher safety and environmental adaptivity. Herein, the bio-source and unique molecular structures of various types of natural bio-origin materials are briefly introduced. Their properties and processing technologies are systematically summarized. Then, the recent progress of these materials for constructing emerging intelligent flexible electronic devices including energy harvesters, energy storage devices, and sensors are introduced. Furthermore, the applications of these flexible electronic devices including biomedical implants, artificial e-skin, and environmental monitoring are summarized. Finally, future challenges and prospects for developing high-performance bio-origin material-based flexible devices are discussed. This review aims to provide a comprehensive and systematic summary of the latest advances in the natural bio-origin material-based flexible devices, which is expected to offer inspirations for exploitation of green flexible electronics, bridging the gap in future human-machine-environment interactions.

Dynamic Surface Wrinkles for In Situ Light-Driven Dynamic Gratings

Dynamic diffraction gratings (DDGs) are considered as one of the most promising technologies for application in smart optical devices because of their in situ dynamic regulation of light propagation on demand; however, it is still a challenge to fabricate dynamic periodic micro/nanostructures due to limited materials and processes. Here, a facile and feasible strategy to construct a near-infrared (NIR) radiation-driven DDG is developed based on a double-sided surface pattern, which is fabricated by dynamic wrinkles and/or soft-imprinted static wrinkles. Poly(dimethylsiloxane) (PDMS) containing carbon nanotubes (CNTs) serves as the substrate, and wrinkles are formed on both sides. The resulting double-sided wrinkle pattern can be used as a DDG to generate various adjustable two-dimensional (2D) diffraction patterns driven by NIR light. Furthermore, with various combinations of wrinkles, we demonstrated a single-sided responsive DDG and a double-sided responsive DDG to realize the evolution of diffraction patterns from 2D to one-dimensional (1D) and 2D to zero-dimensional (0D), respectively. The results provide an alternative for DDGs that will have wide applications in smart display, sensing, and imaging systems.

Double Lock Label Based on Thermosensitive Polymer Hydrogels for Information Camouflage and Multilevel Encryption

Developing extra safety encryption technologies to prevent information leakage and combat fakes is in high demand but is challenging. Herein, we propose a "double lock" strategy based on both lower critical solution temperature (LCST) and upper critical solution temperature (UCST) polymer hydrogels for information camouflage and multilevel encryption. Two types of hydrogels were synthesized by the method of random copolymerization. The number of -CO-NH₂ groups in the network structure of the hydrogels changed the enthalpic or entropic thermo-responsive hydrogels, and ultimately precisely controlled their phase transition temperature. The crosslink density of the polymer hydrogels governs the diffusion kinetics, resulting in a difference in the time for their color change. The combination of multiple LCST and UCST hydrogels in one label realized information encryption and dynamic information identification in the dimensions of both time and temperature. This work is highly interesting for the fields of information encryption, anti-counterfeiting, and smart responsive materials.

Activation of extracellular electron network in non-electroactive bacteria by Bombyx mori silk

Extracellular electron transfer material (EETM) has increasingly attracted attentions for the enhancing effect on multiple microbial reactions. Especially, EETM is known to be essential to activate the energy network in non-electroactive bacteria. It is motivated to find out an EETM which is natural-based, environmentally friendly, and easily produced at large-scale. In this study, Bombyx mori silk is found, for the first time, to function as an EETM by using an EETM-dependent pentachlorophenol (PCP) dechlorinating anaerobic microbial culture. Subsequently, by dividing fibroin fiber into different soluble/insoluble fractions and correlating their EET functions with their structural properties based on various spectroscopic analyses, the β-sheet configuration is suggested as an essential structure supporting the EET function of silk materials. The analyses also suggested the involvement of sulfur-containing amino acids in this function. The EET function is not degraded by boiling or acid/alkaline treatments and the material can be utilized multiple times, although it is susceptible to UV irradiation. Bombyx mori silk also enhance other microbial reactions, including Fe(III)OOH reduction, CO₂ reduction to acetate, and nitrogen fixation. This discovery provides a basis for developing biotechnology for environmental remediation, global warming reduction, and biofertilizer production using Bombyx mori silk and its wastes.

Silk Hydrogel Electrostatically Functionalized with a Polycationic Antimicrobial Peptide: Molecular Interactions, Gel Properties, and Antimicrobial Activity

Functionalization of silk fibroin hydrogel with antimicrobial activity is essential for promoting the applications of this excellent biomaterial. In this work, a simple approach based on electrostatic interaction is adopted to produce antimicrobial silk hydrogel containing an antimicrobial peptide (AMP), polymyxin B, an important last-line antibiotic to treat multidrug-resistant bacterial superbugs. The polycationic property of this peptide and the negative charge of silk fibroin lead to strong interactions between them, as demonstrated by changes in nanofibril structure, gelation kinetics, ζ-potential, fluorescence emission, and rheological properties of the gel. The hydrogels loaded with polymyxin B demonstrated antimicrobial activity against two Gram-negative bacterial strains. A combination of the results from the different characterizations suggests that the optimal molar ratio of polymyxin B to silk fibroin is 1:2.5. As most AMPs are cationic, this electrostatic approach is suitable for the straightforward functionalization of inert silk hydrogel with other AMPs.

Antimicrobial and Bioactive Silk Peptide Hybrid Hydrogel with a Heterogeneous Double Network Formed by Orthogonal Assembly

Hydrogels mimic the natural extracellular matrix in terms of their nanofibrous structure and large water content. However, the lack of a combination of properties including sufficient heterogeneity in the gel structure, intrinsic antimicrobial activity, and bioactivity limits the efficiency of hydrogels for tissue engineering applications. In this work, a hydrogel with a combination of these properties was fabricated by hybridizing silk fibroin with a low-molecular-weight peptide gelator. It was observed that silk fibroin and the peptide gelator assembled orthogonally in sequence. While the morphology of silk fibroin nanofibrils was not affected by the peptide gelator, silk fibroin promoted the formation of wider nanoribbons of the peptide gelator by modulating its nucleation and growth. Orthogonal assembly maintained the antimicrobial activity of the peptide gelator and the excellent biocompatibility of silk fibroin in the hybrid gel. The hybrid gel also demonstrated improved interactions with cells, an indicator of a higher bioactivity, possibly due to the heterogeneous double network structure.

Light-driven dynamic surface wrinkles for adaptive visible camouflage

Camouflage is widespread in nature, engineering, and the military. Dynamic surface wrinkles enable a material the on-demand control of the reflected optical signal and may provide an alternative to achieve adaptive camouflage. Here, we demonstrate a feasible strategy for adaptive visible camouflage based on light-driven dynamic surface wrinkles using a bilayer system comprising an anthracene-containing copolymer (PAN) and pigment-containing poly (dimethylsiloxane) (pigment-PDMS). In this system, the photothermal effect-induced thermal expansion of pigment-PDMS could eliminate the wrinkles. The multiwavelength light-driven dynamic surface wrinkles could tune the scattering of light and the visibility of the PAN film interference color. Consequently, the color captured by the observer could switch between the exposure state that is distinguished from the background and the camouflage state that is similar to the surroundings. The bilayer wrinkling system toward adaptive visible camouflage is simple to configure, easy to operate, versatile, and exhibits in situ dynamic characteristics without any external sensors and extra stimuli.

Deconstruction and Reassembly of Renewable Polymers and Biocolloids into Next Generation Structured Materials

This review considers the most recent developments in supramolecular and supraparticle structures obtained from natural, renewable biopolymers as well as their disassembly and reassembly into engineered materials. We introduce the main interactions that control bottom-up synthesis and top-down design at different length scales, highlighting the promise of natural biopolymers and associated building blocks. The latter have become main actors in the recent surge of the scientific and patent literature related to the subject. Such developments make prominent use of multicomponent and hierarchical polymeric assemblies and structures that contain polysaccharides (cellulose, chitin, and others), polyphenols (lignins, tannins), and proteins (soy, whey, silk, and other proteins). We offer a comprehensive discussion about the interactions that exist in their native architectures (including multicomponent and composite forms), the chemical modification of polysaccharides and their deconstruction into high axial aspect nanofibers and nanorods. We reflect on the availability and suitability of the latter types of building blocks to enable superstructures and colloidal associations. As far as processing, we describe the most relevant transitions, from the solution to the gel state and the routes that can be used to arrive to consolidated materials with prescribed properties. We highlight the implementation of supramolecular and superstructures in different technological fields that exploit the synergies exhibited by renewable polymers and biocolloids integrated in structured materials.

Deep learning enhanced terahertz imaging of silkworm eggs development

Terahertz (THz) technology lays the foundation for next-generation high-speed wireless communication, nondestructive testing, food safety inspecting, and medical applications. When THz technology is integrated by artificial intelligence (AI), it is confidently expected that THz technology could be accelerated from the laboratory research stage to practical industrial applications. Employing THz video imaging, we can gain more insights into the internal morphology of silkworm egg. Deep learning algorithm combined with THz silkworm egg images, rapid recognition of the silkworm egg development stages is successfully demonstrated, with a recognition accuracy of ∼98.5%. Through the fusion of optical imaging and THz imaging, we further improve the AI recognition accuracy of silkworm egg development stages to ∼99.2%. The proposed THz imaging technology not only features the intrinsic THz imaging advantages, but also possesses AI merits of low time consuming and high recognition accuracy, which can be extended to other application scenarios.

Estimating Kinetic Rate Parameters for Enzymatic Degradation of Lyophilized Silk Fibroin Sponges

Sponge-like biomaterials formed from silk fibroin are promising as degradable materials in clinical applications due to their controllable breakdown into simple amino acids or small peptides in vivo. Silk fibroin, isolated from Bombyx mori silkworm cocoons, can be used to form sponge-like materials with a variety of tunable parameters including the elastic modulus, porosity and pore size, and level of nanocrystalline domains. These parameters can be independently tuned during formulation resulting in a wide parameter space and set of final materials. Determining the mechanism and rate constants for biomaterial degradation of these tunable silk materials would allow scientists to evaluate and predict the biomaterial performance for the large array of tissue engineering applications and patient ailments a priori. We first measured in vitro degradation rates of silk sponges using common protein-degrading enzymes such as Proteinase K and Protease XIV. The concentration of the enzyme in solution was varied (1, 0.1, 0.01 U/mL) along with one silk sponge formulation parameter: the level of crystallinity within the sponge. Additionally, two experimental degradation methods were evaluated, termed continuous and discrete degradation methods. Silk concentration, polymer chain length and scaffold pore size were held constant during experimentation and kinetic parameter estimation. Experimentally, we observed that the enzyme itself, enzyme concentration within the bulk solution, and the sponge fabrication water annealing time were the major experimental parameters dictating silk sponge degradation in our experimental design. We fit the experimental data to two models, a Michaelis-Menten kinetic model and a modified first order kinetic model. Weighted, non-linear least squares analysis was used to determine the parameters from the data sets and Monte-Carlo simulations were utilized to obtain estimates of the error. We found that modified first order reaction kinetics fit the time-dependent degradation of lyophilized silk sponges and we obtained first order-like rate constants. These results represent the first investigations into determining kinetic parameters to predict lyophilized silk sponge degradation rates and can be a tool for future mathematical representations of silk biomaterial degradation.

Rapid Moisture-Responsive Silk Fibroin Actuators

We report the unique actuation characteristics of moisture-driven, fully reversible soft biopolymer films fabricated from Bombyx mori silk. The instantaneous actuation is driven by the water vapor induced stress gradient generated across the thickness of the film, and it possesses subsecond response and actuation times. The excellent durability and consistent performance of the film without any noticeable fatigue are established by subjecting it to more than a thousand continuous actuation cycles. The weight-lifting capability of the film is fascinating, where a few tens of micrograms of water generate a colossal force required to lift hundreds of milligrams of weight. Several other potential uses of silk fibroin based soft actuators, such as an intelligent textile layer with the crescent-shaped windows that open on perspiring skin and an autonomous crawler, are also demonstrated. Interestingly, even moisture emanating from the human palm triggers the ultrafast actuation process. These silk films are fabricated using a simple facile solution-casting technique, which can be scaled up with relative ease.

Multifunctional Structured Platforms: From Patterning of Polymer-Based Films to Their Subsequent Filling with Various Nanomaterials

There is an astonishing number of optoelectronic, photonic, biological, sensing, or storage media devices, just to name a few, that rely on a variety of extraordinary periodic surface relief miniaturized patterns fabricated on polymer-covered rigid or flexible substrates. Even more extraordinary is that these surface relief patterns can be further filled, in a more or less ordered fashion, with various functional nanomaterials and thus can lead to the realization of more complex structured architectures. These architectures can serve as multifunctional platforms for the design and the development of a multitude of novel, better performing nanotechnological applications. In this work, we aim to provide an extensive overview on how multifunctional structured platforms can be fabricated by outlining not only the main polymer patterning methodologies but also by emphasizing various deposition methods that can guide different structures of functional nanomaterials into periodic surface relief patterns. Our aim is to provide the readers with a toolbox of the most suitable patterning and deposition methodologies that could be easily identified and further combined when the fabrication of novel structured platforms exhibiting interesting properties is targeted.

Patterning of protein-based materials

Micro- and nanopatterning of proteins on surfaces allows to develop for example high-throughput biosensors in biomedical diagnostics and in general advances the understanding of cell-material interactions in tissue engineering. Today, many techniques are available to generate protein pattern, ranging from technically simple ones, such as micro-contact printing, to highly tunable optical lithography or even technically sophisticated scanning probe lithography. Here, one focus is on the progress made in the development of protein-based materials as positive or negative photoresists allowing micro- to nanostructured scaffolds for biocompatible photonic, electronic and tissue engineering applications. The second one is on approaches, which allow a controlled spatiotemporal positioning of a single protein on surfaces, enabled by the recent developments in immobilization techniques coherent with the sensitive nature of proteins, defined protein orientation and maintenance of the protein activity at interfaces. The third one is on progress in photolithography-based methods, which allow to control the formation of protein-repellant/adhesive polymer brushes.

Regulating surface wrinkles using light

Regulating existing micro and nano wrinkle structures into desired configurations is urgently necessary yet remains challenging, especially modulating wrinkle direction and location on demand. In this work, we propose a novel light-controlled strategy for surface wrinkles, which can dynamically and precisely regulate all basic characteristics of wrinkles, including wavelength, amplitude, direction and location (λ, A, θ and Lc ), and arbitrarily tune wrinkle topographies in two dimensions (2D). By considering the bidirectional Poisson's effect and soft boundary conditions, a modified theoretical model depicting the relation between stress distributions and the basic characteristics was developed to reveal the mechanical mechanism of the regulation strategy. Furthermore, the resulting 2D ordered wrinkles can be used as a dynamic optical grating and a smart template to reversibly regulate the morphology of various functional materials. This study will pave the way for wrinkle regulation and guide fabrication technology for functional wrinkled surfaces.

Dynamic wrinkling pattern exhibiting tunable fluorescence for anticounterfeiting applications

A dynamic surface pattern with a topography and fluorescence in response to environmental stimulus can enable information recording, hiding, and reading. Such patterns are therefore widely used in information security and anticounterfeiting. Here, we demonstrate a dynamic dual pattern using a supramolecular network comprising a copolymer containing pyridine (P4VP-nBA-S) and hydroxyl distyrylpyridine (DSP-OH) as the skin layer for bilayer wrinkling systems, in which both the wrinkle morphology and fluorescence color can be simultaneously regulated by visible light-triggered isomerization of DSP-OH, or acids. Acid-induced protonation of pyridines can dynamically regulate the cross-linking of the skin layer through hydrogen bonding, and the fluorescence of DSP-OH. On selective irradiation with 450 nm visible light or acid treatment, the resulting hierarchical patterned surface becomes smooth and wrinkled reversibly, and simultaneously its fluorescence changes dynamically from blue to orange-red. The smart surfaces with dynamic hierarchical wrinkles and fluorescence can find potential application in anticounterfeiting.