Unveiling the structural transformation and activity origin of heteroatom-doped carbons for hydrogen evolution

A novel electrodeposited nanocatalyst of nickel nanoparticles and reduced graphene oxide doped with halogens for hydrogen evolution reaction

Developing non-noble and high-performance metal hydrogen evolution reaction (HER) electrocatalysts is significant for hydrogen production. Doping heteroatoms on the surface of graphene is another amazing measure to improve the catalytic behavior of catalysts. In this work, halogen-doped reduced graphene oxide with nickel nanoparticles (Ni-XRGO) was investigated as an innovative electrocatalyst for the HER. The scanning electron microscopy images of the Ni-XRGO catalyst showed the leaf-like structure morphology with wide distribution. Also, the energy-dispersive X-ray spectroscopy, mapping technique, confirmed that the presence of halogens caused the homogenous distribution of Ni nanoparticles. X-ray diffraction technique confirmed the presence of doped halogens in reduced graphene oxide. The Ni-XRGO electrode with only 61 mV vs. RHE onset potential, 41 mV dec-1 Tafel slope, good lifetime stability, and low charge transfer resistance could be a promising cathodic electrode for catalysis of HER. The particular electrochemical performance is due to the influence of the halogen elements on the charge distribution of the graphene surface; this leads to an enhancement in the exposure of additional active sites and an extension of the electrochemical active area. Our study presents a novel approach to the development of non-precious metal electrocatalysts that are both highly efficient and cost-effective for HER.

Symmetry Breaking of FeN4 Moiety via Edge Defects for Acidic Oxygen Reduction Reaction

Fe-N-C catalysts, with a planar D4h symmetric FeN4 structure, show promising as noble metal-free oxygen reduction reaction catalysts. Nonetheless, the highly symmetric structure restricts the effective manipulation of its geometric and electronic structures, impeding further enhancements in oxygen reduction reaction performance. Here, a high proportion of asymmetric edge-carbon was successfully introduced into Fe-N-C catalysts through morphology engineering, enabling the precise modulation of the FeN4 active site. Electrochemical experimental results demonstrate that FeN4@porous carbon (FeN4@PC), featuring enriched asymmetric edge-FeN4 active sites, exhibits higher acidic oxygen reduction reaction catalytic activity compared to FeN4@flaky carbon (FeN4@FC), where symmetric FeN4 is primarily distributed within the basal-plane. Synchrotron X-ray absorption spectra, X-ray emission spectra, and theoretical calculations indicate that the enhanced oxygen reduction reaction catalytic activity of FeN4@PC is attributed to the higher oxidation state of Fe species in the edge structure of FeN4@PC. This finding paves the way for controlling the local geometric and electronic structures of single-atom active sites, leading to the development of novel and efficient Fe-N-C catalysts.

Atomic Infusion Induced Reconstruction Enhances Multifunctional Thermally Conductive Films for Robust Low-Frequency Electromagnetic Absorption

Deterministic fabrication of highly thermally conductive composite film with satisfying low-frequency electromagnetic (EM) absorption performance exhibits great potential in advancing the application of 5G smart electric devices but persists challenge. Herein, a multifunctional flexible film combined with hetero-structured Fe6W6C-FeWO4@C (FWC-O@C) as the absorber and aramid nanofibers (ANFs) as the matrix was prepared. Driven by an atomic gradient infusion reduction strategy, the carbon atoms of absorbers can be precisely relocated from carbon shell to core oxometallate lattice, triggering in situ carbothermic reduction for customization of unique oxometallate-carbide heterojunctions and surface geometrical structure. Such an atoms reconstruction process effectively regulates interface electronic structure and magnetic configuration, resulting in enhanced polarization loss from abundant heterointerfaces and crystal defects and magnetic loss from hierarchical structure endowed magnetic coupling interaction, which jointly contributes to the efficient low-frequency EM absorption performance. Eventually, optimized FWC-O@C microplate exhibits a broad absorption bandwidth surpassed the entire C band, and the assembled FWC-O@C/ANFs composite film also performs a high thermal conductivity over 2500 % higher than that of the pure ANFs. These findings provide a new insight into the atomic reconstruction affected EM properties and a generalized methodological guidance for preparing multifunctional thermally conductive composite films.

Dynamic evolution of metal-nitrogen-codoped carbon catalysts in electrocatalytic reactions

Atomic metal-nitrogen-codoped carbon (M-N-C) catalysts are highly efficient for various electrocatalytic reactions because of their high atomic utilization efficiency. However, the high surface energy of M-N-C catalysts often results in stability issues in electrochemical reactions. Therefore, understanding the stability and dynamic evolution of M-N-C catalysts is crucial for elucidating the active centers and the composition/structure-activity relationship. This review summarizes the factors affecting the durability of atomic catalysts in electrochemical reactions and discusses possible changes in catalysts during these electrochemical processes. Finally, advanced characterization techniques are described, with a focus on tracking the dynamic evolution of M-N-C catalysts during electrocatalysis. This review offers insights into the rational optimization of M-N-C electrocatalysts and provides a framework for linking their composition and structure with their catalytic activity in future research.

Unveiling the Aggregation of M-N-C Single Atoms into Highly Efficient MOOH Nanoclusters during Alkaline Water Oxidation

M-N-C-type single-atom catalysts (SACs) are highly efficient for the electrocatalytic oxygen evolution reaction (OER). And the isolated metal atoms are usually considered real active sites. However, the oxidative structural evolution of coordinated N during the OER will probably damage the structure of M-N-C, hence resulting in a completely different reaction mechanism. Here, we reveal the aggregation of M-N-C materials during the alkaline OER. Taking Ni-N-C as an example, multiple characterizations show that the coordinated N on the surface of Ni-N-C is almost completely dissolved in the form of NO3 -, accompanied by the generation of abundant O functional groups on the surface of the carbon support. Accordingly, the Ni-N bonds are broken. Through a dissolution-redeposition mechanism and further oxidation, the isolated Ni atoms are finally converted to NiOOH nanoclusters supported by carbon as the real active sites for the enhanced OER. Fe-N-C and Co-N-C also have similar aggregation mechanism. Our findings provide unique insight into the structural evolution and activity origin of M-N-C-based catalysts under electrooxidative conditions.

Vanadium-regulated nickel phosphide nanosheets for electrocatalytic sulfion upgrading and hydrogen production

The electrochemical sulfion oxidation reaction (SOR) is highly desirable to treat sulfion-rich wastewater and achieve energy-saving hydrogen production when coupled with the cathodic hydrogen evolution reaction (HER). Herein, we propose a thermodynamically favorable SOR to couple with the HER, and develop vanadium-doped nickel phosphide (V-Ni2P) nanosheets for simultaneously achieving energy-efficient hydrogen production and sulfur recovery. V doping can efficiently adjust the electronic structure and improve intrinsic activity of Ni2P, which exhibits outstanding electrocatalytic performances for the HER and SOR with low potentials of -0.093 and 0.313 V to afford 10 mA cm-2. Remarkably, the assembled V-Ni2P-based hybrid water electrolyzer coupling the HER with the SOR requires small cell voltages of 0.389 and 0.834 V at 10 and 300 mA cm-2, lower than those required in a traditional water electrolysis system (1.5 and 1.969 V), realizing low-cost sulfion upgrading to value-added sulfur and hydrogen generation. This work provides an approach for energy-saving hydrogen production and toxic waste degradation.

Electrochemically synthesized H2O2 at industrial-level current densities enabled by in situ fabricated few-layer boron nanosheets

Carbon nanomaterials show outstanding promise as electrocatalysts for hydrogen peroxide (H2O2) synthesis via the two-electron oxygen reduction reaction. However, carbon-based electrocatalysts that are capable of generating H2O2 at industrial-level current densities (>300 mA cm-2) with high selectivity and long-term stability remain to be discovered. Herein, few-layer boron nanosheets are in-situ introduced into a porous carbon matrix, creating a metal-free electrocatalyst (Bn-C) with H2O2 production rates of industrial relevance in neutral or alkaline media. Bn-C maintained > 95% Faradaic efficiency during a 140-hour test at 300 mA cm-2 and 0.1 V vs. RHE, and delivered a mass activity of 25.1 mol gcatalyst-1 h-1 in 1.0 M Na2SO4 using a flow cell. Theoretical simulations and experimental studies demonstrate that the superior catalytic performance originates from B atoms with adsorbed O atoms in the boron nanosheets. Bn-C outperforms all metal-based and metal-free carbon catalysts reported to date for H2O2 synthesis at industrial-level current densities.

Self-Supported Porous Carbon Monoliths for Electrocatalytic Hydrogen Evolution in Alkaline Freshwater and Seawater

Developing efficient catalysts for seawater electrolysis hydrogen evolution reaction (HER) is crucial for producing green hydrogen. Carbonized wood (CW), a porous carbon monolith, is a promising self-supporting electrocatalytic electrode owing to its environmentally friendly, sustainable, and hierarchically porous properties. However, the impact of different tree species on the hydrogen evolution performance remains unclear. In this study, various types of CWs, including carbonized poplar (PoCW), carbonized balsa (BaCW), carbonized fir (FiCW), and carbonized pine (PiCW), have been selected to investigate their electrocatalytic performance in hydrogen evolution. Among these, the PoCW exhibits superior electrocatalytic HER performance compared to the other CWs, attributed to its electrochemically active surface area, resistance, and the content of oxygen-containing functional groups. PoCW demonstrates a low overpotential of 284 mV and 356 mV at 10 mA cm-2 in alkaline freshwater and seawater, respectively. Moreover, PoCW shows long-term durability for 100 h in both alkaline freshwater and seawater. This work guides the selection of wood-based carbon monoliths and demonstrates that metal-free, CW-based self-supporting electrodes hold great potential for electrocatalytic hydrogen evolution in both freshwater and seawater.

Dynamic evolution processes in electrocatalysis: structure evolution, characterization and regulation

Reactions on electrocatalytic interfaces often involve multiple processes, including the diffusion, adsorption, and conversion of reaction species and the interaction between reactants and electrocatalysts. Generally, these processes are constantly changing rather than being in a steady state. Recently, dynamic evolution processes on electrocatalytic interfaces have attracted increasing attention owing to their significant roles in catalytic reaction kinetics. In this review, we aim to provide insights into the dynamic evolution processes in electrocatalysis to emphasize the importance of unsteady-state processes in electrocatalysis. Specifically, the dynamic structure evolution of electrocatalysts, methods for the characterization of the dynamic evolution and the strategies for the regulation of the dynamic evolution for improving electrocatalytic performance are summarized. Finally, the conclusion and outlook on the research on dynamic evolution processes in electrocatalysis are presented. It is hoped that this review will provide a deeper understanding of dynamic evolution in electrocatalysis, and studies of electrocatalytic reaction processes and kinetics on the unsteady-state microscopic spatial and temporal scales will be given more attention.

Pushing Theoretical Potassium Storage Limits of MXenes through Introducing New Carbon Active Sites

Surface-driven capacitive storage enhances rate performance and cyclability, thereby improving the efficacy of high-power electrode materials and fast-charging batteries. Conventional defect engineering, widely-employed capacitive storage optimization strategy, primarily focuses on the influence of defects themselves on capacitive behaviors. However, the role of local environment surrounding defects, which significantly affects surface properties, remains largely unexplored for lack of suitable material platform and has long been neglected. As proof-of-concept, typical Ti3C2Tx MXenes are chosen as model materials owing to metallic conductivity and tunable surface properties, satisfying the requirements for capacitive-type electrodes. Using density functional theory (DFT) calculations, the potential of MXenes with modulated local atomic environment is anticipated and introducing new carbon sites found near pores can activate electrochemically inert surface, attaining record theoretical potassium storage capacities of MXenes (291 mAh g-1). This supposition is realized through atomic tailoring via chemical scissor within sublayers, exposing new sp3-hybridized carbon active sites. The resulting MXenes demonstrate unprecedented rate performance and cycling stability. Notably, MXenes with higher carbon exposure exhibit a record-breaking capacity over 200 mAh g-1 and sustain a capacity retention higher than 80% after 20 months. These findings underscore the effectiveness of regulating defects' neighboring environment and illuminate future high-performance electrode design.

Structural Degradation of M-N-C (M=Co, Ni and Fe) Single-Atom Electrocatalysts at Industrial-Grade Current Density for Long-Term Reduction

M-N-C single-atom catalysts (SACs) are promising electrode materials for many electro-reduction reactions. However, their stability is far from practical applications, and their deactivation mechanism has been rarely investigated. Herein, we demonstrate the structural degradation of M-N-C (M=Co, Ni, and Fe) at industrial-grade current density for long-term electro-reduction. Both M-N and N-C bonds are broken, resulting in the gradual hydrogenation and dissolution of N in the form of ammonia. The residual M is finally converted to M-containing core-shell nanoparticles after sequential dissolution, redeposition, and electro-reduction. The destruction of the M-N-C structure and the formation of nanoparticles greatly affect the electrocatalytic performance. Our work highlights the structural degradation and deactivation mechanism of M-N-C-type SACs under strong reductive conditions and provides useful information for inspiring researchers to develop new strategies to improve the electrocatalytic stability of similar types of materials.

Near-Barrierless CO Oxidation Using Phosphotungstic Acid-Supported Single-Atom Catalysts

Efficient CO oxidation at ambient or low temperatures is essential for environmental purification and selective CO oxidation in H2, yet achieving this remains a challenge with current methodologies. In this research, we extensively evaluated the catalytic performance of phosphotungstic acid (PTA)-supported 11 M1/PTA single-atom catalysts (SACs) using density functional theory calculations across both gas phase and 12 common solvents. The Rh1/PTA, Pd1/PTA, and Pt1/PTA systems exhibit moderate CO adsorption energies, facilitating the feasibility of oxygen vacancy formation. Remarkably, the Pd1/PTA and Pt1/PTA catalysts exhibited negligible energy barriers and demonstrated exceptionally high catalytic rates, with values reaching up to (1 × 1010)11, markedly exceeding the threshold for room temperature reactions, set at 6.55 × 108. This phenomenon is attributed to a transition from the high-energy barrier processes of oxygen dissociation in O2 and N-O bond dissociation in N2O to the more efficient dissociation of H2O2. Orbital analysis and charge variations at metal sites throughout the reaction process provide deeper insights into the role of the three metal catalytic sites in CO activation. Our findings not only reveal key aspects of SACs in facilitating CO oxidation at low temperatures but also provide valuable insights for future catalytic reaction mechanism studies and environmental applications.

Dual-strategy engineered nickel phosphide for achieving efficient hydrazine-assisted hydrogen production in seawater

Electrocatalytic hydrogen production in seawater to alleviate freshwater shortage pressures is promising, but is hindered by the sluggish oxygen evolution reaction and detrimental chloride electrochemistry. Herein, a dual strategy approach of Fe-doping and CeO2-decoration in nickel phosphide (Fe-Ni2P/CeO2) is rationally designed to achieve superior bifunctional catalytic performance for the hydrogen evolution reaction (HER) and hydrazine oxidation reaction (HzOR) in seawater. Notably, the two-electrode Fe-Ni2P/CeO2-based hybrid seawater electrolyzer realizes energy-efficient and chlorine-free hydrogen production with ultralow cell voltages of 0.051 and 0.597 V at 10 and 400 mA cm-2, which are significantly lower than those needed in the hydrazine-free seawater electrolyzer. Density functional theory calculations manifest that the combination of Fe doping and heterointerface construction between Fe-Ni2P and CeO2 can adjust the electronic structure of the Ni2P and optimize the water dissociation barrier and hydrogen adsorption free energy, leading to improvement of the intrinsic catalytic performance. This route affords a feasible solution for future large-scale hydrogen generation using abundant ocean water.

Constructing Ru-O-TM Bridge in NiFe-LDH Enables High Current Hydrazine-assisted H2 Production

Hydrazine oxidation-assisted water splitting is a critical technology to tackle the high energy consumption in large-scale H2 production. Ru-based electrocatalysts hold promise for synergetic hydrogen reduction (HER) and hydrazine oxidation (HzOR) catalysis but are hindered by excessive superficial adsorption of reactant intermediate. Herein, this work designs Ru cluster anchoring on NiFe-LDH (denoted as Ruc/NiFe-LDH), which effectively enhances the intermediate adsorption capacity of Ru by constructing Ru─O─Ni/Fe bridges. Notably, it achieves an industrial current density of 1 A cm-2 at an unprecedentedly low voltage of 0.43 V, saving 3.94 kWh m-3 H2 in energy, and exhibits remarkable stability over 120 h at a high current density of 5 A cm-2. Advanced characterizations and theoretical calculation reveal that the presence of Ru─O─Ni/Fe bridges widens the d-band width (Wd) of the Ru cluster, leading to a lower d-band center and higher electron occupation on antibonding orbitals, thereby facilitating moderate adsorption energy and enhanced catalytic activity of Ru.

Red Carbon Mediated Formation of Cu2O Clusters Dispersed on the Oxocarbon Framework by Fehling's Route and their Use for the Nitrate Electroreduction in Acidic Conditions

The oligomers of carbon suboxide, known as red carbon, exhibit a highly conjugated structure and semiconducting properties. Upon mild heat treatment, it transforms into a carbonaceous framework rich in oxygen surface terminations, called oxocarbon. In this study, the abundant oxygen functionalities are harnessed as anchors to create oxocarbon-supported nanohybrid electrocatalysts. Starting with single atomic Cu (II) strongly coordinated to oxygen atoms on red carbon, the Fehling reaction leads to the formation of Cu2O clusters. Simultaneously, a covalent oxocarbon framework emerges via cross-linking, providing robust support for Cu2O clusters. Notably, the oxocarbon support effectively stabilizes Cu2O clusters of very small size, ensuring their high durability in acidic conditions and the presence of ammonia. The synthesized material exhibits a superior electrocatalytic activity for nitrate reduction under acidic electrolyte conditions, with a high yield rate of ammonium (NH4 +) at 3.31 mmol h-1 mgcat -1 and a Faradaic efficiency of 92.5% at a potential of -0.4 V (vs RHE).

Remodeling the Electronic Structure of Metallic Nickel and Ruthenium via Alloying in a Molecular Template for Sustainable Hydrogen Evolution

The reasonably constructed high-performance electrocatalyst is crucial to achieve sustainable electrocatalytic water splitting. Alloying is a prospective approach to effectively boost the activity of metal electrocatalysts. However, it is a difficult subject for the controllable synthesis of small alloying nanostructures with high dispersion and robustness, preventing further application of alloy catalysts. Herein, we propose a well-defined molecular template to fabricate a highly dispersed NiRu alloy with ultrasmall size. The catalyst presents superior alkaline hydrogen evolution reaction (HER) performance featuring an overpotential as low as 20.6 ± 0.9 mV at 10 mA·cm-2. Particularly, it can work steadily for long periods of time at industrial-grade current densities of 0.5 and 1.0 A·cm-2 merely demanding low overpotentials of 65.7 ± 2.1 and 127.3 ± 4.3 mV, respectively. Spectral experiments and theoretical calculations revealed that alloying can change the d-band center of both Ni and Ru by remodeling the electron distribution and then optimizing the adsorption of intermediates to decrease the water dissociation energy barrier. Our research not only demonstrates the tremendous potential of molecular templates in architecting highly active ultrafine nanoalloy but also deepens the understanding of water electrolysis mechanism on alloy catalysts.

Recent Advances in Mechanistic Understanding of Metal-Free Carbon Thermocatalysis and Electrocatalysis with Model Molecules

Metal-free carbon, as the most representative heterogeneous metal-free catalysts, have received considerable interests in electro- and thermo-catalytic reactions due to their impressive performance and sustainability. Over the past decade, well-designed carbon catalysts with tunable structures and heteroatom groups coupled with various characterization techniques have proposed numerous reaction mechanisms. However, active sites, key intermediate species, precise structure-activity relationships and dynamic evolution processes of carbon catalysts are still rife with controversies due to the monotony and limitation of used experimental methods. In this Review, we summarize the extensive efforts on model catalysts since the 2000s, particularly in the past decade, to overcome the influences of material and structure limitations in metal-free carbon catalysis. Using both nanomolecule model and bulk model, the real contribution of each alien species, defect and edge configuration to a series of fundamentally important reactions, such as thermocatalytic reactions, electrocatalytic reactions, were systematically studied. Combined with in situ techniques, isotope labeling and size control, the detailed reaction mechanisms, the precise 2D structure-activity relationships and the rate-determining steps were revealed at a molecular level. Furthermore, the outlook of model carbon catalysis has also been proposed in this work.