The reversible condensation and expansion of the rotavirus genome

Spontaneous Interconversion between Different Narrowly Defined Shapes of Rotavirus Double-Layered Particles Studied in Real Time by High-Resolution Mobility Analysis

Rotavirus double-layered particles (DLPs) are studied in the gas phase with a high-resolution differential mobility analyzer (DMA). DLPs were transferred to 10 mM aqueous ammonium acetate, electrosprayed into the gas phase, converted into primarily singly charged particles, and DMA-analyzed. Up to seven slightly different conformations were resolved, whose apparently random, fast (minutes), and reversible interconversions were followed in real time. They sometimes evolved into just two distinct structures, with periods of one dominating over the other and vice versa. Differences between the DLP structures in solution and in the gas phase are clearly revealed by the smaller DLP diameter found here (60 versus 70 nm). Nevertheless, we argue that the multiple gas-phase conformers observed originate in as many conformations pre-existing in solution. We further hypothesize that these conformers correspond to incomplete DLPs having lost some of the VP6 trimer quintets surrounding each of the 12 5-fold axes. Instances of this peculiar loss have been previously documented by cryoelectron microscopy for the rotavirus Wa strain, as well as via charge detection mass spectrometry for five other rotavirus strains included in the RotaTec vaccine. Evidence of this loss systematically found for all 7 rotavirus types so far studied in aqueous ammonium acetate may be a special feature of this electrolyte.

Viral Capsid and Polymerase in Reoviridae

The members of the family Reoviridae (reoviruses) consist of 9-12 discrete double-stranded RNA (dsRNA) segments enclosed by single, double, or triple capsid layers. The outer capsid proteins of reoviruses exhibit the highest diversity in both sequence and structural organization. By contrast, the conserved RNA-dependent RNA polymerase (RdRp) structure in the conserved innermost shell in all reoviruses suggests that they share common transcriptional regulatory mechanisms. After reoviruses are delivered into the cytoplasm of a host cell, their inner capsid particles (ICPs) remain intact and serve as a stable nanoscale machine for RNA transcription and capping performed using enzymes in ICPs. Advances in cryo-electron microscopy have enabled the reconstruction at near-atomic resolution of not only the icosahedral capsid, including capping enzymes, but also the nonicosahedrally distributed complexes of RdRps within the capsid at different transcriptional stages. These near-atomic resolution structures allow us to visualize highly coordinated structural changes in the related enzymes, genomic RNA, and capsid protein during reovirus transcription. In addition, reoviruses encode their own enzymes for nascent RNA capping before RNA releasing from their ICPs.

Structure and assembly of double-stranded RNA mycoviruses

Mycoviruses are a diverse group that includes ssRNA, dsRNA, and ssDNA viruses, with or without a protein capsid, as well as with a complex envelope. Most mycoviruses are transmitted by cytoplasmic interchange and are thought to lack an extracellular phase in their infection cycle. Structural analysis has focused on dsRNA mycoviruses, which usually package their genome in a 120-subunit T=1 icosahedral capsid, with a capsid protein (CP) dimer as the asymmetric unit. The atomic structure is available for four dsRNA mycovirus from different families: Saccharomyces cerevisiae virus L-A (ScV-L-A), Penicillium chrysogenum virus (PcV), Penicillium stoloniferum virus F (PsV-F), and Rosellinia necatrix quadrivirus 1 (RnQV1). Their capsids show structural variations of the same framework, with asymmetric or symmetric CP dimers respectively for ScV-L-A and PsV-F, dimers of similar domains of a single CP for PcV, or of two different proteins for RnQV1. The CP dimer is the building block, and assembly proceeds through dimers of dimers or pentamers of dimers, in which the genome is packed as ssRNA by interaction with CP and/or viral polymerase. These capsids remain structurally undisturbed throughout the viral cycle. The T=1 capsid participates in RNA synthesis, organizing the viral polymerase (1-2 copies) and a single loosely packaged genome segment. It also acts as a molecular sieve, to allow the passage of viral transcripts and nucleotides, but to prevent triggering of host defense mechanisms. Due to the close mycovirus-host relationship, CP evolved to allocate peptide insertions with enzyme activity, as reflected in a rough outer capsid surface.

Disassembly Intermediates of the Brome Mosaic Virus Identified by Charge Detection Mass Spectrometry

Capsid disassembly and genome release are critical steps in the lifecycle of a virus. However, their mechanisms are poorly understood, both in vivo and in vitro. Here, we have identified two in vitro disassembly pathways of the brome mosaic virus (BMV) by charge detection mass spectrometry and transmission electron microscopy. When subjected to a pH jump to a basic environment at low ionic strength, protein-RNA interactions are disrupted. Under these conditions, BMV appears to disassemble mainly through a global cleavage event into two main fragments: a near complete capsid that has released the RNA and the released RNA complexed to a small number of the capsid proteins. Upon slow buffer exchange to remove divalent cations at neutral pH, capsid protein interactions are disrupted. The BMV virions swell but there is no measurable loss of the RNA. Some of the virions break into small fragments, leading to an increase in the abundance of species with masses less than 1 MDa. The peak attributed to the BMV virion shifts to a higher mass with time. The mass increase is attributed to additional capsid proteins associating with the disrupted capsid protein-RNA complex, where the RNA is presumably partially exposed. It is likely that this pathway is more closely related to how the capsid disassembles in vivo, as it offers the advantage of protecting the RNA with the capsid protein until translation begins.

Capsid Structure of dsRNA Fungal Viruses

Most fungal, double-stranded (ds) RNA viruses lack an extracellular life cycle stage and are transmitted by cytoplasmic interchange. dsRNA mycovirus capsids are based on a 120-subunit T = 1 capsid, with a dimer as the asymmetric unit. These capsids, which remain structurally undisturbed throughout the viral cycle, nevertheless, are dynamic particles involved in the organization of the viral genome and the viral polymerase necessary for RNA synthesis. The atomic structure of the T = 1 capsids of four mycoviruses was resolved: the L-A virus of Saccharomyces cerevisiae (ScV-L-A), Penicillium chrysogenum virus (PcV), Penicillium stoloniferum virus F (PsV-F), and Rosellinia necatrix quadrivirus 1 (RnQV1). These capsids show structural variations of the same framework, with 60 asymmetric or symmetric homodimers for ScV-L-A and PsV-F, respectively, monomers with a duplicated similar domain for PcV, and heterodimers of two different proteins for RnQV1. Mycovirus capsid proteins (CP) share a conserved α-helical domain, although the latter may carry different peptides inserted at preferential hotspots. Insertions in the CP outer surface are likely associated with enzymatic activities. Within the capsid, fungal dsRNA viruses show a low degree of genome compaction compared to reoviruses, and contain one to two copies of the RNA-polymerase complex per virion.

Cryo-EM shows the polymerase structures and a nonspooled genome within a dsRNA virus

Double-stranded RNA (dsRNA) viruses possess a segmented dsRNA genome and a number of RNA-dependent RNA polymerases (RdRps) enclosed in a capsid. Until now, the precise structures of genomes and RdRps within the capsids have been unknown. Here we report the structures of RdRps and associated RNAs within nontranscribing and transcribing cypoviruses (NCPV and TCPV, respectively), using a combination of cryo-electron microscopy (cryo-EM) and a symmetry-mismatch reconstruction method. The RdRps and associated RNAs appear to exhibit a pseudo-D3 symmetric organization in both NCPV and TCPV. However, the molecular interactions between RdRps and the genomic RNA were found to differ in these states. Our work provides insight into the mechanisms of the replication and transcription in dsRNA viruses and paves a way for structural determination of lower-symmetry complexes enclosed in higher-symmetry structures.

Rotaviruses: Extraction and Isolation of RNA, Reassortant Strains, and NSP4 Protein

Rotavirus (RV) contains 11 double-stranded RNA segments that encode for twelve structural and nonstructural proteins. The separation and isolation of viral RNA is a necessary precursor for many experimental techniques and can be useful for rapid RV RNA typing and sequencing of different rotavirus strains. The segmented genome enables RV to recombine easily. These recombinant viruses are essential for many purposes, including generation of potential vaccine strains. Rotavirus gene 10 expresses the viral enterotoxin, NSP4, which has been the focus of several studies due to the influence of NSP4 on rotavirus replication, morphogenesis, and pathogenesis. This unit will describe the isolation and separation of viral RNAs, the production characterization of recombinant RV in culture, and the expression and isolation of NSP4 in mammalian and insect cells.

New insights into rotavirus entry machinery: stabilization of rotavirus spike conformation is independent of trypsin cleavage

The infectivity of rotavirus, the main causative agent of childhood diarrhea, is dependent on activation of the extracellular viral particles by trypsin-like proteases in the host intestinal lumen. This step entails proteolytic cleavage of the VP4 spike protein into its mature products, VP8* and VP5*. Previous cryo-electron microscopy (cryo-EM) analysis of trypsin-activated particles showed well-resolved spikes, although no density was identified for the spikes in uncleaved particles; these data suggested that trypsin activation triggers important conformational changes that give rise to the rigid, entry-competent spike. The nature of these structural changes is not well understood, due to lack of data relative to the uncleaved spike structure. Here we used cryo-EM and cryo-electron tomography (cryo-ET) to characterize the structure of the uncleaved virion in two model rotavirus strains. Cryo-EM three-dimensional reconstruction of uncleaved virions showed spikes with a structure compatible with the atomic model of the cleaved spike, and indistinguishable from that of digested particles. Cryo-ET and subvolume average, combined with classification methods, resolved the presence of non-icosahedral structures, providing a model for the complete structure of the uncleaved spike. Despite the similar rigid structure observed for uncleaved and cleaved particles, trypsin activation is necessary for successful infection. These observations suggest that the spike precursor protein must be proteolytically processed, not to achieve a rigid conformation, but to allow the conformational changes that drive virus entry.

Rotavirus is responsible for more than 400,000 annual infant deaths worldwide. Its viral particle bears 60 protuberant spikes that constitute the machinery responsible for virus binding to and entry into the host cell. For efficient infection, the protein molecules that build the spike must be cleaved. Despite the importance of this activation step, the nature of the changes induced in the spike structure is unknown. According to the current hypothesis, the uncleaved spike is very flexible, and activation stabilizes the spike in an entry-competent conformation. Here we used distinct electron microscopy techniques to determine the structure of the uncleaved particle in two model rotavirus strains. Our results provide a complete structure of the uncleaved spike and demonstrate that cleaved and uncleaved spikes have similar conformations, indicating that proteolytic processing is not involved in stabilization of the spike. We suggest that spike processing is important for infection since it is necessary to allow the spike domain movements involved in rotavirus entry.

The molecular biology of Bluetongue virus replication

The members of Orbivirus genus within the Reoviridae family are arthropod-borne viruses which are responsible for high morbidity and mortality in ruminants. Bluetongue virus (BTV) which causes disease in livestock (sheep, goat, cattle) has been in the forefront of molecular studies for the last three decades and now represents the best understood orbivirus at a molecular and structural level. The complex nature of the virion structure has been well characterised at high resolution along with the definition of the virus encoded enzymes required for RNA replication; the ordered assembly of the capsid shell as well as the protein and genome sequestration required for it; and the role of host proteins in virus entry and virus release. More recent developments of Reverse Genetics and Cell-Free Assembly systems have allowed integration of the accumulated structural and molecular knowledge to be tested at meticulous level, yielding higher insight into basic molecular virology, from which the rational design of safe efficacious vaccines has been possible. This article is centred on the molecular dissection of BTV with a view to understanding the role of each protein in the virus replication cycle. These areas are important in themselves for BTV replication but they also indicate the pathways that related viruses, which includes viruses that are pathogenic to man and animals, might also use providing an informed starting point for intervention or prevention.

Rotavirus mRNAS are released by transcript-specific channels in the double-layered viral capsid

Rotaviruses are the single most common cause of fatal and severe childhood diarrheal illness worldwide (>125 million cases annually). Rotavirus shares structural and functional features with many viruses, such as the presence of segmented double-stranded RNA genomes selectively and tightly packed with a conserved number of transcription complexes in icosahedral capsids. Nascent transcripts exit the capsid through 12 channels, but it is unknown whether these channels specialize in specific transcripts or simply act as general exit conduits; a detailed description of this process is needed for understanding viral replication and genomic organization. To this end, we developed a single molecule assay for capturing and identifying transcripts extruded from transcriptionally active viral particles. Our findings support a model in which each channel specializes in extruding transcripts of a specific segment that in turn is linked to a single transcription complex. Our approach can be extended to study other viruses and transcription systems.

Attractive hydration forces in DNA-dendrimer interactions on the nanometer scale

The energetic contribution of attractive hydration forces arising from water ordering is an interesting but often neglected aspect of macromolecular interactions. Ordering effects of water can bring about cooperativity in many intermolecular transactions, in both the short and long range. Given its high charge density, this is of particular importance for DNA. For instance, in nanotechnology, highly charged dendrimers are used for DNA compaction and transfection. Hypothesizing that water ordering and hydration forces should be maximal for DNA complexes that show charge complementarity (positive-negative), we present here an analysis of water ordering from molecular dynamics simulations and free energy calculations of the interaction between DNA and a nanoparticle with a high positive charge density. Our results indicate not only that complexation of the dendrimer with DNA affects the local water structure but also that ordered water molecules facilitate long-range interactions between the molecules. This contributes significantly to the free energy of binding of dendrimers to DNA and extends the interaction well beyond the electrostatic range of the DNA. Such water effects are of potentially substantial importance in cases when molecules appear to recognize each other across sizable distances, or for which kinetic rates are too fast to be due to pure diffusion. Our results are in good agreement with experiments on the role of solvent in DNA condensation by multivalent cations and exemplify a microscopic realization of mean-field phenomenological theories for hydration forces between mesoscopic surfaces.

Chrysovirus structure: repeated helical core as evidence of gene duplication

Chrysoviruses are double-stranded RNA viruses with a multipartite genome. Structure of two fungal chrysoviruses, Penicillium chrysogenum virus and Cryphonectria nitschkei chrysovirus 1, has been determined by three-dimensional cryo-electron microscopy analysis and in hydrodynamic studies. The capsids of both viruses are based on a T=1 lattice containing 60 subunits, remain structurally undisturbed throughout the viral cycle, and participate in genome metabolism. The capsid protein is formed by a repeated α-helical core, indicative of gene duplication. Whereas the chrysovirus capsid protein has two motifs with the same fold, most dsRNA virus capsid subunits consist of dimers of a single protein with similar folds. The arrangement of the chrysovirus α-helical core is conserved in the totivirus L-A capsid protein, suggesting a shared basic fold. The encapsidated genome is organized in concentric shells; whereas inner dsRNA shells are diffuse, the outermost layer is organized into a dodecahedral cage beneath the protein capsid. This genome ordering could constitute a framework for dsRNA transcription in the capsid interior and/or have a structural role for capsid stability.

Microscopic basis for the mesoscopic extensibility of dendrimer-compacted DNA

The mechanism of DNA compaction by dendrimers is key to the design of nanotechnologies that can deliver genetic material into cells. We present atomistic simulations, mesoscopic modeling and single-molecule pulling experiments describing DNA dendrimer interactions. All-atom molecular dynamics were used to characterize pulling-force-dependent interactions between DNA and generation-3 PAMAM amine-terminated dendrimers, and a free energy profile and mean forces along the interaction coordinate are calculated. The energy, force, and geometry parameters computed at the atomic level are input for a Monte Carlo model yielding mesoscopic force-extension curves. Actual experimental single-molecule curves obtained with optical tweezers are also presented, and they show remarkable agreement with the virtual curves from our model. The calculations reveal the microscopic origin of the hysteresis observed in the phase transition underlying compaction. A broad range of ionic and pulling parameters is sampled, and suggestions for windows of conditions to probe new single-molecule behavior are made.

Rotavirus architecture at subnanometer resolution

Rotavirus, a nonturreted member of the Reoviridae, is the causative agent of severe infantile diarrhea. The double-stranded RNA genome encodes six structural proteins that make up the triple-layer particle. X-ray crystallography has elucidated the structure of one of these capsid proteins, VP6, and two domains from VP4, the spike protein. Complementing this work, electron cryomicroscopy (cryoEM) has provided relatively low-resolution structures for the triple-layer capsid in several biochemical states. However, a complete, high-resolution structural model of rotavirus remains unresolved. Combining new structural analysis techniques with the subnanometer-resolution cryoEM structure of rotavirus, we now provide a more detailed structural model for the major capsid proteins and their interactions within the triple-layer particle. Through a series of intersubunit interactions, the spike protein (VP4) adopts a dimeric appearance above the capsid surface, while forming a trimeric base anchored inside one of the three types of aqueous channels between VP7 and VP6 capsid layers. While the trimeric base suggests the presence of three VP4 molecules in one spike, only hints of the third molecule are observed above the capsid surface. Beyond their interactions with VP4, the interactions between VP6 and VP7 subunits could also be readily identified. In the innermost T=1 layer composed of VP2, visualization of the secondary structure elements allowed us to identify the polypeptide fold for VP2 and examine the complex network of interactions between this layer and the T=13 VP6 layer. This integrated structural approach has resulted in a relatively high-resolution structural model for the complete, infectious structure of rotavirus, as well as revealing the subtle nuances required for maintaining interactions in such a large macromolecular assembly.

Rotavirus proteins: structure and assembly

Rotavirus is a major pathogen of infantile gastroenteritis. It is a large and complex virus with a multilayered capsid organization that integrates the determinants of host specificity, cell entry, and the enzymatic functions necessary for endogenous transcription of the genome that consists of 11 dsRNA segments. These segments encode six structural and six nonstructural proteins. In the last few years, there has been substantial progress in our understanding of both the structural and functional aspects of a variety of molecular processes involved in the replication of this virus. Studies leading to this progress using of a variety of structural and biochemical techniques including the recent application of RNA interference technology have uncovered several unique and intriguing features related to viral morphogenesis. This review focuses on our current understanding of the structural basis of the molecular processes that govern the replication of rotavirus.

Rotavirus genome replication and morphogenesis: role of the viroplasm

The rotaviruses, members of the family Reoviridae, are icosahedral triple-layered viruses with genomes consisting of 11 segments of double-stranded (ds)RNA. A characteristic feature of rotavirus-infected cells is the formation of large cytoplasmic inclusion bodies, termed viroplasms. These dynamic and highly organized structures serve as viral factories that direct the packaging and replication of the viral genome into early capsid assembly intermediates. Migration of the intermediates to the endoplasmic reticulum (ER) initiates a budding process that culminates in final capsid assembly. Recent information on the development and organization of viroplasms, the structure and function of its components, and interactive pathways linking RNA synthesis and capsid assembly provide new insight into how these microenvironments serve to interface the replication and morphogenetic processes of the virus.

pH-induced conformational change of the rotavirus VP4 spike: implications for cell entry and antibody neutralization

The rotavirus spike protein, VP4, is a major determinant of infectivity and neutralization. Previously, we have shown that trypsin-enhanced infectivity of rotavirus involves a transformation of the VP4 spike from a flexible to a rigid bilobed structure. Here we show that at elevated pH the spike undergoes a drastic, irreversible conformational change and becomes stunted, with a pronounced trilobed appearance. These particles with altered spikes, at a normal pH of 7.5, despite the loss of infectivity and the ability to hemagglutinate, surprisingly exhibit sialic acid (SA)-independent cell binding in contrast to the SA-dependent cell binding exhibited by native virions. Remarkably, a neutralizing monoclonal antibody that remains bound to spikes throughout the pH changes (pH 7 to 11 and back to pH 7) completely prevents this conformational change, preserving the SA-dependent cell binding and hemagglutinating functions of the virion. A hypothesis that emerges from the present study is that high-pH treatment triggers a conformational change that mimics a post-SA-attachment step to expose an epitope recognized by a downstream receptor in the rotavirus cell entry process. This process involves sequential interactions with multiple receptors, and the mechanism by which the antibody neutralizes is by preventing this conformational change.

Structural organization of an encephalitic human isolate of Banna virus (genus Seadornavirus, family Reoviridae)

Banna virus (BAV) is the type species of the genus Seadornavirus within the family Reoviridae. The Chinese BAV isolate (BAV-Ch), which causes encephalitis in humans, was shown to have a structural organization and particle morphology reminiscent of that of rotaviruses, with fibre proteins projecting from the surface of the particle. Intact BAV-Ch virus particles contain seven structural proteins, two of which (VP4 and VP9) form the outer coat. The inner (core) particles contain five additional proteins (VP1, VP2, VP3, VP8 and VP10) and are ‘non-turreted’, with a relatively smooth surface appearance. VP2 is the ‘T=2’ protein that forms the innermost ‘subcore’ layer, whilst VP8 is the ‘T=13’ protein forming the core-surface layer. Sequence comparisons indicate that BAV VP9 and VP10 are equivalent to the VP8* and VP5* domains, respectively, of rotavirus outer-coat protein VP4 (GenBank accession no. P12976). VP9 has also been shown to be responsible for virus attachment to the host-cell surface and may be involved in internalization. These similarities reveal a previously unreported genetic link between the genera Rotavirus and Seadornavirus, although the expression of BAV VP9 and VP10 from two separate genome segments, rather than by the proteolytic cleavage of a single gene product (as seen in rotavirus VP4), suggests a significant evolutionary jump between the members of these two genera.

Interactions between the inner and outer capsids of bluetongue virus

Bluetongue virus is a large and structurally complex virus composed of three concentric capsid layers that surround 10 segments of a double-stranded RNA genome. X-ray crystallographic analysis of the particles without the outer capsid layer has provided atomic structural details of VP3 and VP7, which form the inner two layers. However, limited structural information is available on the other five proteins in the virion-two of which are important for receptor recognition, hemagglutination, and membrane interaction-are in the outer layer, and the others, important for endogenous transcriptase activity are internal. Here we report the electron cryomicroscopy (cryo-EM) reconstruction of the mature particle, which shows that the outer layer has a unique non-T = 13 icosahedral organization consisting of two distinct triskelion and globular motifs interacting extensively with the underlying T = 13 layer. Comparative cryo-EM analysis of the recombinant corelike particles has shown that VP1 (viral polymerase) and VP4 (capping enzyme) together form a flower-shaped structure attached to the underside of VP3, directly beneath the fivefold axis. The structural data have been substantiated by biochemical studies demonstrating the interactions between the individual outer and inner capsid proteins.

Nonstructural proteins involved in genome packaging and replication of rotaviruses and other members of the Reoviridae

Rotaviruses, members of family Reoviridae, are a major cause of acute gastroenteritis of infants and young children. The rotavirus genome consists of 11 segments of double-stranded (ds)RNA and the virion is an icosahedron composed of multiple layers of protein. The virion core is formed by a layer of VP2 and contains multiple copies of the RNA-dependent RNA polymerase VP1 and the mRNA-capping enzyme VP3. Double-layered particles (DLPs), representing cores surrounded by a layer of VP6, direct the synthesis of viral mRNAs. Rotavirus core- and DLP-like replication intermediates (RIs) catalyze the synthesis of dsRNA from viral template mRNAs coincidentally with the packaging of the mRNAs into the pre-capsid structures of RIs. In addition to structural proteins, the nonstructural proteins NSP2 and NSP5 are components of RIs with replicase activity. NSP2 self assembles into octameric structures that have affinity for ssRNA and NTPase and helix-destabilizing activites. Its interaction with nucleotides induces a conformational shift in the octamer to a more condensed form. Phosphate residues generated by the NTPase activity are believed to be transferred from NSP2 to NSP5, leading to the hyperphosphorylation of the latter protein. It is suspected that the transfer of the phosphate group to NSP5 allows NSP2 to return to its noncondensed state and, thus, to accept another NTP molecule. The NSP5-mediated cycling of NSP2 from condensed to noncondensed combined with its RNA binding and helix-destabilizing activities are consistent with NSP2 functioning as a molecular motor to facilitate the packaging of template mRNAs into the pre-capsid structures of RIs. Similarities with the bluetongue virus protein NS2 and the reovirus proteins sigmaNS and micro2 suggest that they may be functional homologs of rotavirus NSP2 and NSP5.

Emerging themes in rotavirus cell entry, genome organization, transcription and replication

Rotaviruses, causative agents of gastroenteritis in young animals and humans, are large icosahedral viruses with a complex architecture. The double-stranded RNA (dsRNA) genome composed of 11 segments, which codes for 6 structural and 6 non-structural proteins, is enclosed within three concentric capsid layers. In addition to facilitating host-specific interactions, the design of the capsid architecture in rotaviruses as in other dsRNA viruses should also be conducive to the requirement of transcribing the enclosed genome segments repeatedly and simultaneously within the capsid interior. Several non-structural proteins facilitate the subsequent processes of genome replication and packaging. Electron cryomicroscopy studies of intact virions, recombinant virus-like particles, functional complexes, together with recent X-ray crystallographic studies on rotavirus proteins have provided structural insights into the capsid architecture, genome organization, antibody interaction, cell entry, trypsin-enhanced infectivity, endogenous transcription and replication. These studies underscore contrasting features and unifying themes between rotavirus and other dsRNA viruses.

Reovirus polymerase lambda 3 localized by cryo-electron microscopy of virions at a resolution of 7.6 A

Reovirus is an icosahedral, double-stranded (ds) RNA virus that uses viral polymerases packaged within the viral core to transcribe its ten distinct plus-strand RNAs. To localize these polymerases, the structure of the reovirion was refined to a resolution of 7.6 A by cryo-electron microscopy (cryo-EM) and three-dimensional (3D) image reconstruction. X-ray crystal models of reovirus proteins, including polymerase lambda 3, were then fitted into the density map. Each copy of lambda 3 was found anchored to the inner surface of the icosahedral core shell, making major contacts with three molecules of shell protein lambda 1 and overlapping, but not centering on, a five-fold axis. The overlap explains why only one copy of lambda 3 is bound per vertex. lambda 3 is furthermore oriented with its transcript exit channel facing a small channel through the lambda 1 shell, suggesting how the nascent RNA is passed into the large external cavity of the pentameric capping enzyme complex formed by protein lambda 2.

Applications of a bilateral denoising filter in biological electron microscopy

Due to the sensitivity of biological sample to the radiation damage, the low dose imaging conditions used for electron microscopy result in extremely noisy images. The processes of digitization, image alignment, and 3D reconstruction also introduce additional sources of noise in the final 3D structure. In this paper, we investigate the effectiveness of a bilateral denoising filter in various biological electron microscopy applications. In contrast to the conventional low pass filters, which inevitably smooth out both noise and structural features simultaneously, we found that bilateral filter holds a distinct advantage in being capable of effectively suppressing noise without blurring the high resolution details. In as much, we have applied this technique to individual micrographs, entire 3D reconstructions, segmented proteins, and tomographic reconstructions.

Three-dimensional structure of penicillium chrysogenum virus: a double-stranded RNA virus with a genuine T=1 capsid

Although double-stranded (ds) RNA viruses are a rather diverse group, they share general architectural principles and numerous functional features. All dsRNA viruses, from the mammalian reoviruses to the bacteriophage phi6, including fungal viruses, share a specialized capsid involved in transcription and replication of the dsRNA genome, and release of the viral plus strand RNA. This ubiquitous capsid consists of 120 protein subunits in a so-called T=2 organization. The stringent requirements of dsRNA metabolism may explain the similarities observed in capsid architecture among a broad spectrum of dsRNA viruses. We have used cryo-electron microscopy combined with three-dimensional reconstruction techniques and complementary biophysical techniques, to determine the structure at 26A resolution of the Penicillium chrysogenum virus (PcV) capsid. In contrast to all previous studies of dsRNA viruses, PcV capsid is an authentic T=1 capsid with 60 equivalent protein subunits. This T=1 capsid is built with the largest structural protein (110 kDa). Structural comparison between viral particles and capsids devoid of RNA show changes along the inner surface of the capsid, mostly located around the icosahedral 5 and 3-fold axis. Considering that there may be numerous interactions between the inner surface of the protein shell and the underlying RNA, the genome could have an important role in the conformation of the structural subunits. The empty capsid structure suggests a mechanism for transcript release from actively transcribing particles. Furthermore, sequence analysis of the PcV coat protein revealed that both halves of the protein share numerous regions of similar amino acid residues. These results open new perspectives when considering the structural organization of dsRNA virus capsids.

Structures of rotavirus reassortants demonstrate correlation of altered conformation of the VP4 spike and expression of unexpected VP4-associated phenotypes

Numerous prior studies have indicated that viable rotavirus reassortants containing structural proteins of heterologous parental origin may express unexpected phenotypes, such as changes in infectivity and immunogenicity. To provide a structural basis for alterations in phenotypic expression, a three-dimensional structural analysis of these reassortants was conducted. The structures of the reassortants show that while VP4 generally maintains the parental structure when moved to a heterologous protein background, in certain reassortants, there are subtle alterations in the conformation of VP4. The alterations in VP4 conformation correlated with expression of unexpected VP4-associated phenotypes. Interactions between heterologous VP4 and VP7 in reassortants expressing unexpected phenotypes appeared to induce the conformational alterations seen in VP4.

Structural comparisons of empty and full cytoplasmic polyhedrosis virus. Protein-RNA interactions and implications for endogenous RNA transcription mechanism

Viruses in the family Reoviridae are capable of transcription within the intact capsids. As the only single-shelled and thus the simplest member of the Reoviridae, cytoplasmic polyhedrosis virus (CPV) provides an attractive system for studying endogenous transcription. We report the structures of the full and empty CPV determined at 13-A resolution by electron cryomicroscopy. The structure of the empty CPV reveals a density attributed to the transcription enzyme complex, which is attached to the internal surface of the capsid shell below each of the 12 turrets. The full capsid has an identical capsid shell but contains additional internal densities contributed by the genomic double-stranded (ds) RNA. The RNA densities proximal to the capsid shell are organized into layers with a dodecahedral appearance, suggesting a genome organization of dsRNA segments each having a cone shape spooling around a transcription enzyme complex. Our structures also suggest that the capsid shell serves as a scaffold for appropriate positioning of the RNA genome, whereas nascent mRNA release takes place through the constricted central channel of the turret. Based on these observations, a detailed moving template transcription mechanism is proposed that may provide insight into the well coordinated and highly efficient endogenous RNA transcription of dsRNA viruses.

Molecular interactions and viral stability revealed by structural analyses of chemically treated cypovirus capsids

Cytoplasmic polyhedrosis virus (CPV, genus Cypovirus) is a unique member of the family Reoviridae which lacks the outer protective shells that exist in all other members, yet exhibits unusual stability. We have analyzed the effects of different acidic, basic, detergent, and urea treatments on CPV capsids. The integrity of the CPV capsids was unaffected under high-pH conditions that disrupted the orthoreovirus inner core, consistent with its ability to maintain structural integrity in extremely alkaline environments during infection. However, it was sensitive to low pH, detergents, and urea, similarly to other viruses in this family. The three-dimensional structure comparisons by electron cryomicroscopy of the intact empty CPV capsid with the "spikeless" capsid whose turrets were removed by chemical treatments revealed the interaction footprint of the turret on the capsid shell. The observed structural changes associated with the removal of the turret suggest critical structural roles of the turret in maintaining capsid integrity in addition to its enzymatic activities.