The proton motive force, acting on acidic residues, promotes translocation of amino-terminal domains of membrane proteins when the hydrophobicity of the translocation signal is low

Lipid-Assisted Membrane Protein Folding and Topogenesis

Due to the heterogenous lipid environment in which integral membrane proteins are embedded, they should follow a set of assembly rules, which govern transmembrane protein folding and topogenesis accordingly to a given lipid profile. Recombinant strains of bacteria have been engineered to have different membrane phospholipid compositions by molecular genetic manipulation of endogenous and foreign genes encoding lipid biosynthetic enzymes. Such strains provide a means to investigate the in vivo role of lipids in many different aspects of membrane function, folding and biogenesis. In vitro and in vivo studies established a function of lipids as molecular chaperones and topological determinants specifically assisting folding and topogenesis of membrane proteins. These results led to the extension of the Positive Inside Rule to Charge Balance Rule, which incorporates a role for lipid-protein interactions in determining membrane protein topological organization at the time of initial membrane insertion and dynamically after initial assembly. Membrane protein topogenesis appears to be a thermodynamically driven process in which lipid-protein interactions affect the potency of charged amino acid residues as topological signals. Dual topology for a membrane protein can be established during initial assembly where folding intermediates in multiple topological conformations are in rapid equilibrium (thus separated by a low activation energy), which is determined by the lipid environment. Post-assembly changes in lipid composition or post-translational modifications can trigger a reorganization of protein topology by inducing destabilization and refolding of a membrane protein. The lipid-dependent dynamic nature of membrane protein organization provides a novel means of regulating protein function.

Charged residues next to transmembrane regions revisited: "Positive-inside rule" is complemented by the "negative inside depletion/outside enrichment rule"

Background

Transmembrane helices (TMHs) frequently occur amongst protein architectures as means for proteins to attach to or embed into biological membranes. Physical constraints such as the membrane’s hydrophobicity and electrostatic potential apply uniform requirements to TMHs and their flanking regions; consequently, they are mirrored in their sequence patterns (in addition to TMHs being a span of generally hydrophobic residues) on top of variations enforced by the specific protein’s biological functions.

Results

With statistics derived from a large body of protein sequences, we demonstrate that, in addition to the positive charge preference at the cytoplasmic inside (positive-inside rule), negatively charged residues preferentially occur or are even enriched at the non-cytoplasmic flank or, at least, they are suppressed at the cytoplasmic flank (negative-not-inside/negative-outside (NNI/NO) rule). As negative residues are generally rare within or near TMHs, the statistical significance is sensitive with regard to details of TMH alignment and residue frequency normalisation and also to dataset size; therefore, this trend was obscured in previous work. We observe variations amongst taxa as well as for organelles along the secretory pathway. The effect is most pronounced for TMHs from single-pass transmembrane (bitopic) proteins compared to those with multiple TMHs (polytopic proteins) and especially for the class of simple TMHs that evolved for the sole role as membrane anchors.

Conclusions

The charged-residue flank bias is only one of the TMH sequence features with a role in the anchorage mechanisms, others apparently being the leucine intra-helix propensity skew towards the cytoplasmic side, tryptophan flanking as well as the cysteine and tyrosine inside preference. These observations will stimulate new prediction methods for TMHs and protein topology from a sequence as well as new engineering designs for artificial membrane proteins.

Electronic supplementary material

The online version of this article (doi:10.1186/s12915-017-0404-4) contains supplementary material, which is available to authorized users.

Effects of mixed proximal and distal topogenic signals on the topological sensitivity of a membrane protein to the lipid environment

The final topology of membrane proteins is thought to be dictated primarily by the encoding sequence. However, according to the Charge Balance Rule the topogenic signals within nascent membrane proteins are interpreted in agreement with the Positive Inside Rule as influenced by the protein phospholipid environment. The role of long-range protein-lipid interactions in establishing a final uniform or dual topology is unknown. In order to address this role, we determined the positional dependence of the potency of charged residues as topological signals within Escherichia coli sucrose permease (CscB) in cells in which the zwitterionic phospholipid phosphatidylethanolamine (PE), acting as topological determinant, was either eliminated or tightly titrated. Although the position of a single or paired oppositely charged amino acid residues within an extramembrane domain (EMD), either proximal, central or distal to a transmembrane domain (TMD) end, does not appear to be important, the oppositely charged residues exert their topogenic effects separately only in the absence of PE. Thus, the Charge Balance Rule can be executed in a retrograde manner from any cytoplasmic EMD or any residue within an EMD most likely outside of the translocon. Moreover, CscB is inserted into the membrane in two opposite orientations at different ratios with the native orientation proportional to the mol % of PE. The results demonstrate how the cooperative contribution of lipid-protein interactions affects the potency of charged residues as topological signals, providing a molecular mechanism for the realization of single, equal or different amounts of oppositely oriented protein within the same membrane.

Marginally hydrophobic transmembrane α-helices shaping membrane protein folding

Cells have developed an incredible machinery to facilitate the insertion of membrane proteins into the membrane. While we have a fairly good understanding of the mechanism and determinants of membrane integration, more data is needed to understand the insertion of membrane proteins with more complex insertion and folding pathways. This review will focus on marginally hydrophobic transmembrane helices and their influence on membrane protein folding. These weakly hydrophobic transmembrane segments are by themselves not recognized by the translocon and therefore rely on local sequence context for membrane integration. How can such segments reside within the membrane? We will discuss this in the light of features found in the protein itself as well as the environment it resides in. Several characteristics in proteins have been described to influence the insertion of marginally hydrophobic helices. Additionally, the influence of biological membranes is significant. To begin with, the actual cost for having polar groups within the membrane may not be as high as expected; the presence of proteins in the membrane as well as characteristics of some amino acids may enable a transmembrane helix to harbor a charged residue. The lipid environment has also been shown to directly influence the topology as well as membrane boundaries of transmembrane helices-implying a dynamic relationship between membrane proteins and their environment.

Charge requirements of lipid II flippase activity in Escherichia coli

Peptidoglycan (PG) is an extracytoplasmic glycopeptide matrix essential for the integrity of the envelope of most bacteria. The PG building block is a disaccharide-pentapeptide that is synthesized as a lipid-linked precursor called lipid II. The translocation of the amphipathic lipid II across the cytoplasmic membrane is required for subsequent incorporation of the disaccharide-pentapeptide into PG. In Escherichia coli, the essential inner membrane protein MurJ is the lipid II flippase. Previous studies showed that 8 charged residues in the central cavity region of MurJ are crucial for function. Here, we completed the functional analysis of all 57 charged residues in MurJ and demonstrated that the respective positive or negative charge of the 8 aforementioned residues is required for proper MurJ function. Loss of the negative charge in one of these residues, D39, causes a severe defect in MurJ biogenesis; by engineering an intragenic suppressor mutation that restores MurJ biogenesis, we found that this charge is also essential for MurJ function. Because of the low level of homology between MurJ and putative orthologs from Gram-positive bacteria, we explored the conservation of these 8 charged residues in YtgP, a homolog from Streptococcus pyogenes. We found that only 3 positive charges are similarly positioned and essential in YtgP; YtgP possesses additional charged residues within its predicted cavity that are essential for function and conserved among Gram-positive bacteria. From these data, we hypothesize that some charged residues in the cavity region of MurJ homologs are required for interaction with lipid II and/or energy coupling during transport.

Lipids and topological rules governing membrane protein assembly

Membrane protein folding and topogenesis are tuned to a given lipid profile since lipids and proteins have co-evolved to follow a set of interdependent rules governing final protein topological organization. Transmembrane domain (TMD) topology is determined via a dynamic process in which topogenic signals in the nascent protein are recognized and interpreted initially by the translocon followed by a given lipid profile in accordance with the Positive Inside Rule. The net zero charged phospholipid phosphatidylethanolamine and other neutral lipids dampen the translocation potential of negatively charged residues in favor of the cytoplasmic retention potential of positively charged residues (Charge Balance Rule). This explains why positively charged residues are more potent topological signals than negatively charged residues. Dynamic changes in orientation of TMDs during or after membrane insertion are attributed to non-sequential cooperative and collective lipid-protein charge interactions as well as long-term interactions within a protein. The proportion of dual topological conformers of a membrane protein varies in a dose responsive manner with changes in the membrane lipid composition not only in vivo but also in vitro and therefore is determined by the membrane lipid composition. Switching between two opposite TMD topologies can occur in either direction in vivo and also in liposomes (designated as fliposomes) independent of any other cellular factors. Such lipid-dependent post-insertional reversibility of TMD orientation indicates a thermodynamically driven process that can occur at any time and in any cell membrane driven by changes in the lipid composition. This dynamic view of protein topological organization influenced by the lipid environment reveals previously unrecognized possibilities for cellular regulation and understanding of disease states resulting from mis-folded proteins. This article is part of a Special Issue entitled: Protein trafficking and secretion in bacteria. Guest Editors: Anastassios Economou and Ross Dalbey.

Life at the border: adaptation of proteins to anisotropic membrane environment

This review discusses main features of transmembrane (TM) proteins which distinguish them from water-soluble proteins and allow their adaptation to the anisotropic membrane environment. We overview the structural limitations on membrane protein architecture, spatial arrangement of proteins in membranes and their intrinsic hydrophobic thickness, co-translational and post-translational folding and insertion into lipid bilayers, topogenesis, high propensity to form oligomers, and large-scale conformational transitions during membrane insertion and transport function. Special attention is paid to the polarity of TM protein surfaces described by profiles of dipolarity/polarizability and hydrogen-bonding capacity parameters that match polarity of the lipid environment. Analysis of distributions of Trp resides on surfaces of TM proteins from different biological membranes indicates that interfacial membrane regions with preferential accumulation of Trp indole rings correspond to the outer part of the lipid acyl chain region-between double bonds and carbonyl groups of lipids. These "midpolar" regions are not always symmetric in proteins from natural membranes. We also examined the hydrophobic effect that drives insertion of proteins into lipid bilayer and different free energy contributions to TM protein stability, including attractive van der Waals forces and hydrogen bonds, side-chain conformational entropy, the hydrophobic mismatch, membrane deformations, and specific protein-lipid binding.

Membrane topology of transmembrane proteins: determinants and experimental tools

Membrane topology refers to the two-dimensional structural information of a membrane protein that indicates the number of transmembrane (TM) segments and the orientation of soluble domains relative to the plane of the membrane. Since membrane proteins are co-translationally translocated across and inserted into the membrane, the TM segments orient themselves properly in an early stage of membrane protein biogenesis. Each membrane protein must contain some topogenic signals, but the translocation components and the membrane environment also influence the membrane topology of proteins. We discuss the factors that affect membrane protein orientation and have listed available experimental tools that can be used in determining membrane protein topology.

Polarity and charge of the periplasmic loop determine the YidC and sec translocase requirement for the M13 procoat lep protein

During membrane biogenesis, the M13 procoat protein is inserted into the lipid bilayer in a strictly YidC-dependent manner with both the hydrophobic signal sequence and the membrane anchor sequence promoting translocation of the periplasmic loop via a hairpin mechanism. Here, we find that the translocase requirements can be altered for PClep in a predictable manner by changing the polarity and charge of the peptide region that is translocated across the membrane. When the polarity of the translocated peptide region is lowered and the charged residues in this region are removed, translocation of this loop region occurs largely by a YidC- and Sec-independent mechanism. When the polarity is increased to that of the wild-type procoat protein, the YidC insertase is essential for translocation. Further increasing the polarity, by adding charged residues, switches the insertion pathway to a YidC/Sec mechanism. Conversely, we find that increasing the hydrophobicity of the transmembrane segments of PClep can decrease the translocase requirement for translocation of the peptide chain. This study provides a framework to understand why the YidC and Sec machineries exist in parallel and demonstrates that the YidC insertase has a limited capacity to translocate a peptide chain on its own.

Topological mapping methods for α-helical bacterial membrane proteins--an update and a guide

Integral membrane proteins with α-helical transmembrane segments (TMS) are known to play important and diverse roles in prokaryotic cell physiology. The net hydrophobicity of TMS directly corresponds to the observed difficulties in expressing and purifying these proteins, let alone producing sufficient yields for structural studies using two-/three-dimensional (2D/3D) crystallographic or nuclear magnetic resonance methods. To gain insight into the function of these integral membrane proteins, topological mapping has become an important tool to identify exposed and membrane-embedded protein domains. This approach has led to the discovery of protein tracts of functional importance and to the proposition of novel mechanistic hypotheses. In this review, we synthesize the various methods available for topological mapping of α-helical integral membrane proteins to provide investigators with a comprehensive reference for choosing techniques suited to their particular topological queries and available resources.

Charge composition features of model single-span membrane proteins that determine selection of YidC and SecYEG translocase pathways in Escherichia coli

We have investigated the features of single-span model membrane proteins based upon leader peptidase that determines whether the proteins insert by a YidC/Sec-independent, YidC-only, or YidC/Sec mechanism. We find that a protein with a highly hydrophobic transmembrane segment that inserts into the membrane by a YidC/Sec-independent mechanism becomes YidC-dependent if negatively charged residues are inserted into the translocated periplasmic domain or if the hydrophobicity of the transmembrane segment is reduced by substituting polar residues for nonpolar ones. This suggests that charged residues in the translocated domain and the hydrophobicity within the transmembrane segment are important determinants of the insertion pathway. Strikingly, the addition of a positively charged residue to either the translocated region or the transmembrane region can switch the insertion requirements such that insertion requires both YidC and SecYEG. To test conclusions from the model protein studies, we confirmed that a positively charged residue is a SecYEG determinant for the endogenous proteins ATP synthase subunits a and b and the TatC subunit of the Tat translocase. These findings provide deeper insights into how pathways are selected for the insertion of proteins into the Escherichia coli inner membrane.

An energy transduction mechanism used in bacterial flagellar type III protein export

Flagellar proteins of bacteria are exported by a specific export apparatus. FliI ATPase forms a complex with FliH and FliJ and escorts export substrates from the cytoplasm to the export gate complex, which is made up of six membrane proteins. The export gate complex utilizes proton motive force across the cytoplasmic membrane for protein translocation, but the mechanism remains unknown. Here we show that the export gate complex by itself is a proton-protein antiporter that uses the two components of proton motive force, Δψ and ΔpH, for different steps of the protein export process. However, in the presence of FliH, FliI and FliJ, a specific binding of FliJ with an export gate membrane protein, FlhA, is brought about by the FliH-FliI complex, which turns the export gate into a highly efficient, Δψ-driven protein export apparatus.

Por secretion system-dependent secretion and glycosylation of Porphyromonas gingivalis hemin-binding protein 35

The anaerobic Gram-negative bacterium Porphyromonas gingivalis is a major pathogen in severe forms of periodontal disease and refractory periapical perodontitis. We have recently found that P. gingivalis has a novel secretion system named the Por secretion system (PorSS), which is responsible for secretion of major extracellular proteinases, Arg-gingipains (Rgps) and Lys-gingipain. These proteinases contain conserved C-terminal domains (CTDs) in their C-termini. Hemin-binding protein 35 (HBP35), which is one of the outer membrane proteins of P. gingivalis and contributes to its haem utilization, also contains a CTD, suggesting that HBP35 is translocated to the cell surface via the PorSS. In this study, immunoblot analysis of P. gingivalis mutants deficient in the PorSS or in the biosynthesis of anionic polysaccharide-lipopolysaccharide (A-LPS) revealed that HBP35 is translocated to the cell surface via the PorSS and is glycosylated with A-LPS. From deletion analysis with a GFP-CTD[HBP35] green fluorescent protein fusion, the C-terminal 22 amino acid residues of CTD[HBP35] were found to be required for cell surface translocation and glycosylation. The GFP-CTD fusion study also revealed that the CTDs of CPG70, peptidylarginine deiminase, P27 and RgpB play roles in PorSS-dependent translocation and glycosylation. However, CTD-region peptides were not found in samples of glycosylated HBP35 protein by peptide map fingerprinting analysis, and antibodies against CTD-regions peptides did not react with glycosylated HBP35 protein. These results suggest both that the CTD region functions as a recognition signal for the PorSS and that glycosylation of CTD proteins occurs after removal of the CTD region. Rabbits were used for making antisera against bacterial proteins in this study.

Tetratricopeptide repeat protein-associated proteins contribute to the virulence of Porphyromonas gingivalis

Porphyromonas gingivalis is one of the most etiologically important microorganisms in periodontal disease. We found in a previous study that PG1385 (TprA) protein, a tetratricopeptide repeat (TPR) protein, was upregulated in P. gingivalis wild-type cells placed in a mouse subcutaneous chamber and that a tprA mutant was clearly less virulent in the mouse subcutaneous abscess model (M. Yoshimura et al., Oral Microbiol. Immunol. 23:413-418, 2008). In the present study, we investigated the gene expression profile of tprA mutant cells placed in a mouse subcutaneous chamber and found that 9 genes, including PG2102 (tapA), PG2101 (tapB), and PG2100 (tapC) genes, were downregulated in the tprA mutant compared with those in the wild type. Expression of a cluster of tapA, tapB, and tapC genes of the mutant was also downregulated in an in vitro culture with enriched brain heart infusion medium. The TprA protein has three TPR motifs known as a protein-protein interaction module. Yeast two-hybrid system analysis and in vitro protein binding assays with immunoprecipitation and surface plasmon resonance detection revealed that the TprA protein could bind to TapA and TapB proteins. TprA and TapB proteins were located in the periplasmic space, whereas TapA, which appeared to be one of the C-terminal domain family proteins, was located at the outer membrane. We constructed tapA, tapB, and tapC single mutants and a tapA-tapB-tapC deletion mutant. In the mouse subcutaneous infection experiment, all of the mutants were less virulent than the wild type. These results suggest that TprA, TapA, TapB, and TapC are cooperatively involved in P. gingivalis virulence.

Bacterial Sec protein transport is rate-limited by precursor length: a single turnover study

An in vitro real-time single turnover assay for the Escherichia coli Sec transport system was developed based on fluorescence dequenching. This assay corrects for the fluorescence quenching that occurs when fluorescent precursor proteins are transported into the lumen of inverted membrane vesicles. We found that 1) the kinetics were well fit by a single exponential, even when the ATP concentration was rate-limiting; 2) ATP hydrolysis occurred during most of the observable reaction period; and 3) longer precursor proteins transported more slowly than shorter precursor proteins. If protein transport through the SecYEG pore is the rate-limiting step of transport, which seems likely, these conclusions argue against a model in which precursor movement through the SecYEG translocon is mechanically driven by a series of rate-limiting, discrete translocation steps that result from conformational cycling of the SecA ATPase. Instead, we propose that precursor movement results predominantly from Brownian motion and that the SecA ATPase regulates pore accessibility.

Charged amino acids in a preprotein inhibit SecA-dependent protein translocation

Sec translocase catalyzes membrane protein insertion and translocation. We have introduced stretches of charged amino acid residues into the preprotein proOmpA and have analyzed their effect on in vitro protein translocation into Escherichia coli inner membrane vesicles. Both negatively and positively charged amino acid residues inhibit translocation of proOmpA, yielding a partially translocated polypeptide chain that blocks the translocation site and no longer activates preprotein-stimulated SecA ATPase activity. Stretches of positively charged residues are much stronger translocation inhibitors and suppressors of the preprotein-stimulated SecA ATPase activity than negatively charged residues. These results indicate that both clusters of positively and negatively charged amino acids are poor substrates for the Sec translocase and that this is reflected by their inability to stimulate the ATPase activity of SecA.

Lipid-dependent membrane protein topogenesis

The topology of polytopic membrane proteins is determined by topogenic sequences in the protein, protein-translocon interactions, and interactions during folding within the protein and between the protein and the lipid environment. Orientation of transmembrane domains is dependent on membrane phospholipid composition during initial assembly as well as on changes in lipid composition postassembly. The membrane translocation potential of negative amino acids working in opposition to the positive-inside rule is largely dampened by the normal presence of phosphatidylethanolamine, thus explaining the dominance of positive residues as retention signals. Phosphatidylethanolamine provides the appropriate charge density that permits the membrane surface to maintain a charge balance between membrane translocation and retention signals and also allows the presence of negative residues in the cytoplasmic face of proteins for other purposes.

Lipid-protein interactions drive membrane protein topogenesis in accordance with the positive inside rule

Transmembrane domain orientation within some membrane proteins is dependent on membrane lipid composition. Initial orientation occurs within the translocon, but final orientation is determined after membrane insertion by interactions within the protein and between lipid headgroups and protein extramembrane domains. Positively and negatively charged amino acids in extramembrane domains represent cytoplasmic retention and membrane translocation forces, respectively, which are determinants of protein orientation. Lipids with no net charge dampen the translocation potential of negative residues working in opposition to cytoplasmic retention of positive residues, thus allowing the functional presence of negative residues in cytoplasmic domains without affecting protein topology.

To flip or not to flip: lipid-protein charge interactions are a determinant of final membrane protein topology

The molecular details of how lipids influence final topological organization of membrane proteins are not well understood. Here, we present evidence that final topology is influenced by lipid-protein interactions most likely outside of the translocon. The N-terminal half of Escherichia coli lactose permease (LacY) is inverted with respect to the C-terminal half and the membrane bilayer when assembled in mutants lacking phosphatidylethanolamine and containing only negatively charged phospholipids. We demonstrate that inversion is dependent on interactions between the net charge of the cytoplasmic surface of the N-terminal bundle and the negative charge density of the membrane bilayer surface. A transmembrane domain, acting as a molecular hinge between the two halves of the protein, must also exit from the membrane for inversion to occur. Phosphatidylethanolamine dampens the translocation potential of negative residues in favor of the cytoplasmic retention potential of positive residues, thus explaining the dominance of positive over negative amino acids as co- or post-translational topological determinants.

Lipids in the assembly of membrane proteins and organization of protein supercomplexes: implications for lipid-linked disorders

Lipids play important roles in cellular dysfunction leading to disease. Although a major role for phospholipids is in defining the membrane permeability barrier, phospholipids play a central role in a diverse range of cellular processes and therefore are important factors in cellular dysfunction and disease. This review is focused on the role of phospholipids in normal assembly and organization of the membrane proteins, multimeric protein complexes, and higher order supercomplexes. Since lipids have no catalytic activity, it is difficult to determine their function at the molecular level. Lipid function has generally been defined by affects on protein function or cellular processes. Molecular details derived from genetic, biochemical, and structural approaches are presented for involvement of phosphatidylethanolamine and cardiolipin in protein organization. Experimental evidence is presented that changes in phosphatidylethanolamine levels results in misfolding and topological misorientation of membrane proteins leading to dysfunctional proteins. Examples are presented for diseases in which proper protein folding or topological organization is not attained due to either demonstrated or proposed involvement of a lipid. Similar changes in cardiolipin levels affects the structure and function of individual components of the mitochondrial electron transport chain and their organization into supercomplexes resulting in reduced mitochondrial oxidative phosphorylation efficiency and apoptosis. Diseases in which mitochondrial dysfunction has been linked to reduced cardiolipin levels are described. Therefore, understanding the principles governing lipid-dependent assembly and organization of membrane proteins and protein complexes will be useful in developing novel therapeutic approaches for disorders in which lipids play an important role.

Flexibility in targeting and insertion during bacterial membrane protein biogenesis

The biogenesis of Escherichia coli inner membrane proteins (IMPs) is assisted by targeting and insertion factors such as the signal recognition particle (SRP), the Sec-translocon and YidC with translocation of (large) periplasmic domains energized by SecA and the proton motive force (pmf). The use of these factors and forces is probably primarily determined by specific structural features of an IMP. To analyze these features we have engineered a set of model IMPs based on endogenous E. coli IMPs known to follow distinct targeting and insertion pathways. The modified model IMPs were analyzed for altered routing using an in vivo protease mapping approach. The data suggest a facultative use of different combinations of factors.

YidC--an evolutionary conserved device for the assembly of energy-transducing membrane protein complexes

Members of the YidC/Oxa1/Alb3 membrane protein family are multifunctional mediators of membrane protein integration, folding and assembly into large complexes. Their evolutionary conserved and physiologically important role appears to relate to the assembly of major energy-transducing membrane protein complexes.

Identification of a new membrane-associated protein that influences transport/maturation of gingipains and adhesins of Porphyromonas gingivalis

The dual membrane envelopes of Gram-negative bacteria provide two barriers of unlike nature that regulate the transport of molecules into and out of organisms. Organisms have developed several systems for transport across the inner and outer membranes. The Gram-negative periodontopathogenic bacterium Porphyromonas gingivalis produces proteinase and adhesin complexes, gingipains/adhesins, on the cell surface and in the extracellular milieu as one of the major virulence factors. Gingipains and/or adhesins are encoded by kgp, rgpA, rgpB, and hagA on the chromosome. In this study, we isolated a P. gingivalis mutant (porT), which showed very weak activities of gingipains in the cell lysates and culture supernatants. Subcellular fractionation and immunoblot analysis demonstrated that precursor forms of gingipains and adhesins were accumulated in the periplasmic space of the porT mutant cells. Peptide mass fingerprinting and N-terminal amino acid sequencing of the precursor proteins and the kgp'-'rgpB chimera gene product in the porT mutant indicated that these proteins lacked the signal peptide regions, consistent with their accumulation in the periplasm. The PorT protein seemed to be membrane-associated and exposed to the periplasmic space, as revealed by subcellular fractionation and immunoblot analysis using anti-PorT antiserum. These results suggest that the membrane-associated protein PorT is essential for transport of the kgp, rgpA, rgpB, and hagA gene products across the outer membrane from the periplasm to the cell surface, where they are processed and matured.

The early stages of the intracellular transport of membrane proteins: clinical and pharmacological implications

Intracellular transport mechanisms ensure that integral membrane proteins are delivered to their correct subcellular compartments. Efficient intracellular transport is a prerequisite for the establishment of both cell architecture and function. In the past decade, transport processes of proteins have also drawn the attention of clinicians and pharmacologists since many diseases have been shown to be caused by transport-deficient proteins. Membrane proteins residing within the plasma membrane are transported via the secretory (exocytotic) pathway. The general transport routes of the secretory pathway are well established. The transport of membrane proteins starts with their integration into the ER membrane. The ribosomes synthesizing membrane proteins are targeted to the ER membrane, and the nascent chains are co-translationally integrated into the bilayer, i.e., they are inserted while their synthesis is in progress. During ER insertion, the orientation (topology) of the proteins in the membrane is determined. Proteins are folded, and their folding state is checked by a quality control system that allows only correctly folded forms to leave the ER. Misfolded or incompletely folded forms are retained, transported back to the cytosol and finally subjected to proteolysis. Correctly folded proteins are transported in the membranes of vesicles through the ER/Golgi intermediate compartment (ERGIC) and the individual compartments of the Golgi apparatus ( cis, medial, trans) to the plasma membrane. In this review, the current knowledge of the first stages of the intracellular trafficking of membrane proteins will be summarized. This "early secretory pathway" includes the processes of ER insertion, topology determination, folding, quality control and the transport to the Golgi apparatus. Mutations in the genes of membrane proteins frequently lead to misfolded forms that are recognized and retained by the quality control system. Such mutations may cause inherited diseases like cystic fibrosis or retinitis pigmentosa. In the second part of this review, the clinical implications of the early secretory pathway will be discussed. Finally, new pharmacological strategies to rescue misfolded and transport-defective membrane proteins will be outlined.

Reversible topological organization within a polytopic membrane protein is governed by a change in membrane phospholipid composition

Once inserted, transmembrane segments of polytopic membrane proteins are generally considered stably oriented due to the large free energy barrier to topological reorientation of adjacent extramembrane domains. However, the topology and function of the polytopic membrane protein lactose permease of Escherichia coli are dependent on the membrane phospholipid composition, revealing topological dynamics of transmembrane domains after stable membrane insertion (Bogdanov, M., Heacock, P. N., and Dowhan, W. (2002) EMBO J. 21, 2107-2116). In this study, we show that the high affinity phenylalanine permease PheP shares many similarities with lactose permease. PheP assembled in a mutant of E. coli lacking phosphatidylethanolamine (PE) exhibited significantly reduced active transport function and a complete inversion in topological orientation of the N terminus and adjoining transmembrane hairpin loop compared with PheP in a PE-containing strain. Introduction of PE following the assembly of PheP triggered a reorientation of the N terminus and adjacent hairpin to their native orientation associated with regain of wild-type transport function. The reversible orientation of these secondary transport proteins in response to a change in phospholipid composition might be a result of inherent conformational flexibility necessary for transport function or during protein assembly.

Yeast genes controlling responses to topogenic signals in a model transmembrane protein

Yeast protein insertion orientation (PIO) mutants were isolated by selecting for growth on sucrose in cells in which the only source of invertase is a C-terminal fusion to a transmembrane protein. Only the fraction with an exocellular C terminus can be processed to secreted invertase and this fraction is constrained to 2-3% by a strong charge difference signal. Identified pio mutants increased this to 9-12%. PIO1 is SPF1, encoding a P-type ATPase located in the endoplasmic reticulum (ER) or Golgi. spf1-null mutants are modestly sensitive to EGTA. Sensitivity is considerably greater in an spf1 pmr1 double mutant, although PIO is not further disturbed. Pmr1p is the Golgi Ca(2+) ATPase and Spf1p may be the equivalent ER pump. PIO2 is STE24, a metalloprotease anchored in the ER membrane. Like Spf1p, Ste24p is expressed in all yeast cell types and belongs to a highly conserved protein family. The effects of ste24- and spf1-null mutations on invertase secretion are additive, cell generation time is increased 60%, and cells become sensitive to cold and to heat shock. Ste24p and Rce1p cleave the C-AAX bond of farnesylated CAAX box proteins. The closest paralog of SPF1 is YOR291w. Neither rce1-null nor yor291w-null mutations affected PIO or the phenotype of spf1- or ste24-null mutants. Mutations in PIO3 (unidentified) cause a weaker Pio phenotype, enhanced by a null mutation in BMH1, one of two yeast 14-3-3 proteins.

Insertion and glycosylation of Pf3-derived membrane proteins in microsomes

To get insight into the insertion mechanism of small newly synthesized single-spanning membrane proteins, Pf3 coat protein mutants were constructed with potential glycosylation sites in the N-terminus. Some of these proteins, when synthesized in vitro in the presence of microsomes, became efficiently glycosylated, proving that they insert into the membrane and translocate their N-terminus to the lumenal side. Such Pf3 constructs also insert efficiently into Escherichia coli vesicles and even in pure lipid vesicles, suggesting a common mechanism, which might be spontaneous. Glycosylation was sensitive to changes in the amino acid sequence of the N-terminus, suggesting that it depends on the structure of the protein and/or its positioning with respect to the lipid-water interface.

Evolutionarily related insertion pathways of bacterial, mitochondrial, and thylakoid membrane proteins

The inner membranes of eubacteria and mitochondria, as well as the chloroplast thylakoid membrane, contain essential proteins that function in oxidative phosphorylation and electron transport processes or in photosynthesis. Because most of the organellar proteins are nuclear encoded, they are synthesized in the cytoplasm and subsequently imported into the organelle before they are inserted into the membrane. This review focuses on the pathways of protein insertion into the inner membrane of eubacteria and mitochondria and into the chloroplast thylakoid membrane. In many respects, insertion of proteins into the inner membrane of bacteria is a process similar to that used by proteins of the thylakoid membrane. In both of these systems a signal recognition particle (SRP) and a SecYE-translocase are involved, as in translocation into the endoplasmic reticulum. The pathway of proteins into the mitochondrial membranes appears to be different in that it involves no SecYE-like components. A conservative pathway, recently identified in mitochondria, involves the Oxa1 protein for the insertion of proteins from the matrix. The presence of Oxa1 homologues in eubacteria and chloroplasts suggests that this pathway is evolutionarily conserved.

Protein traffic in bacteria: multiple routes from the ribosome to and across the membrane

Bacteria use several routes to target their exported proteins to the plasma membrane. The majority are exported through pores formed by SecY and SecE. Two different molecular machineries are used to target proteins to the SecYE translocon. Translocated proteins, synthesized as precursors with cleavable signal sequences, require cytoplasmic chaperones, such as SecB, to remain competent for posttranslational transport. In concert with SecB, SecA targets the precursors to SecY and energizes their translocation by its ATPase activity. The latter function involves a partial insertion of SecA itself into the SecYE translocon, a process that is strongly assisted by a couple of membrane proteins, SecG, SecD, SecF, YajC, and the proton gradient across the membrane. Integral membrane proteins, however, are specifically recognized by a direct interaction between their noncleaved signal anchor sequences and the bacterial signal recognition particle (SRP) consisting of Ffh and 4.5S RNA. Recognition occurs during synthesis at the ribosome and leads to a cotranslational targeting to SecYE that is mediated by FtsY and the hydrolysis of GTP. No other Sec protein is required for integration unless the membrane protein also contains long translocated domains that engage the SecA machinery. Discrimination between SecA/SecB- and SRP-dependent targeting involves the specificity of SRP for hydrophobic signal anchor sequences and the exclusion of SRP from nascent chains of translocated proteins by trigger factor, a ribosome-associated chaperone. The SecYE pore accepts only unfolded proteins. In contrast, a class of redox factor-containing proteins leaves the cell only as completely folded proteins. They are distinguished by a twin arginine motif of their signal sequences that by an unknown mechanism targets them to specific pores. A few membrane proteins insert spontaneously into the bacterial plasma membrane without the need for targeting factors and SecYE. Insertion depends only on hydrophobic interactions between their transmembrane segments and the lipid bilayer and on the transmembrane potential. Finally, outer membrane proteins of Gram-negative bacteria after having crossed the plasma membrane are released into the periplasm, where they undergo distinct folding events until they insert as trimers into the outer membrane. These folding processes require distinct molecular chaperones of the periplasm, such as Skp, SurA, and PpiD.

Distant downstream sequence determinants can control N-tail translocation during protein insertion into the endoplasmic reticulum membrane

We have studied the membrane insertion of ProW, an Escherichia coli inner membrane protein with seven transmembrane segments and a large periplasmic N-terminal tail, into endoplasmic reticulum (ER)-derived dog pancreas microsomes. Strikingly, significant levels of N-tail translocation is seen only when a minimum of four of the transmembrane segments are present; for constructs with fewer transmembrane segments, the N-tail remains mostly nontranslocated and the majority of the molecules adopt an "inverted" topology where normally nontranslocated parts are translocated and vice versa. N-tail translocation can also be promoted by shortening of the N-tail and by the addition of positively charged residues immediately downstream of the first trasnmembrane segment. We conclude that as many as four consecutive transmembrane segments may be collectively involved in determining membrane protein topology in the ER and that the effects of downstream sequence determinants may vary depending on the size and charge of the N-tail. We also provide evidence to suggest that the ProW N-tail is translocated across the ER membrane in a C-to-N-terminal direction.

Biochemical and genetic evidence for three transmembrane domains in the class I holin, lambda S

lambda S, the prototype class I holin gene, encodes three potential transmembrane domains in its 107 codons, whereas 21 S, the class II prototype spans only 71 codons and encodes two transmembrane domains. Many holin genes, including lambda S and 21 S, have the "dual-start" regulatory motif at the N terminus, suggesting that class I and II holins have the same topology. The primary structure of 21 S strongly suggests a bitopic "helical-hairpin" topology, with N and C termini on the cytoplasmic side of the membrane. However, lambda S chimeras with an N-terminal signal sequence show Lep-dependent function, indicating that the N-terminal domain of S requires export. Here the signal sequence chimera is shown to be sensitive to the missense change A52V, which blocks normal S function. Moreover, cysteine-modification studies in isolated membranes using a collection of S variants with single-cysteine substitutions show that the positions in the core of the 3 putative transmembrane domains of lambda S are protected. Also, S proteins with single-cysteine substitutions in the predicted cytoplasmic and periplasmic loops are more efficiently labeled in inverted membrane vesicles and whole cells, respectively. These data constitute direct evidence that the holin S(lambda) has three transmembrane domains and indicate that class I and class II holins have different topologies, despite regulatory and functional homology.

A single negatively charged residue affects the orientation of a membrane protein in the inner membrane of Escherichia coli only when it is located adjacent to a transmembrane domain

The orientation of membrane proteins is determined by the asymmetric distribution of charged residues in the sequences flanking the transmembrane domains. For the inner membrane of Escherichia coli, numerous studies have shown that an excess of positively charged residues defines a cytoplasmic domain of a membrane protein ("positive inside" rule). The role of negatively charged residues in establishing membrane protein topology, however, is not completely understood. To investigate the influence of negatively charged residues on this process in detail, we have constructed a single spanning chimeric receptor fragment comprising the N terminus and first transmembrane domain of the heptahelical G protein-coupled vasopressin V(2) receptor and the first cytoplasmic loop of the beta(2)-adrenergic receptor. When fused to alkaline phosphatase (PhoA), the receptor fragment inserted into the inner membrane of E. coli with its N terminus facing the cytoplasm (N(in)-C(out) orientation), although both membrane-flanking domains had rather similar topogenic determinants. The orientation of the receptor fragment was changed after the introduction of single glutamate residues into the N terminus. Orientation inversion, however, was found to be dependent on the location of the glutamate substitutions, which had to lie within a narrow window up to 6 residues distant from the transmembrane domain. These results demonstrate that a single negatively charged residue can play an active role as a topogenic determinant of membrane proteins in the inner membrane of E. coli, but only if it is located adjacent to a transmembrane domain.

Delta psi stimulates membrane translocation of the C-terminal part of a signal sequence

For several proteins in Escherichia coli it has been shown that the protonmotive force (pmf) dependence of translocation can be varied with the signal sequence composition, suggesting an effect of the pmf on the signal sequence. To test this possibility, we analyzed the effect of the membrane potential on translocation of the signal sequence. For this purpose, a precursor peptide was used (SP+7), corresponding to the signal sequence of PhoE with the first seven amino acids of the mature part that can be processed by purified leader peptidase. Translocation was studied in pure lipid vesicles containing leader peptidase, with its active site inside the vesicles. In the presence of a positive inside Delta psi, the amount of processing of SP+7 was significantly higher than without a Delta psi, indicating that the translocation of the cleavage region is stimulated by Delta psi. Replacement of the helix-breaking glycine residue at position -10 in the signal sequence for a leucine abolished the effect of Delta psi on the translocation of the cleavage region. It is concluded that Delta psi directly acts on the wild type signal sequence by stimulating the translocation of its C terminus. We propose that Delta psi acts on the signal sequence by stretching it into a transmembrane orientation.

Direct evidence that the proton motive force inhibits membrane translocation of positively charged residues within membrane proteins

The M13 phage procoat protein requires both its signal sequence and its membrane anchor sequence in the mature part of the protein for membrane insertion. Translocation of its short acidic periplasmic loop is stimulated by the proton motive force (pmf) and does not require the Sec components. We now find that the pmf becomes increasingly important for the translocation of negatively charged residues within procoat when the hydrophobicity of the signal or membrane anchor is incrementally reduced. In contrast, we find that the pmf inhibits translocation of the periplasmic loop when it contains one or two positively charged residues. This inhibitory effect of the pmf is stronger when the hydrophobicity of the inserting procoat protein is compromised. No pmf effect is observed for translocation of an uncharged periplasmic loop even when the hydrophobicity is reduced. We also show that the Delta Psi component of the pmf is necessary and sufficient for insertion of representative constructs and that the translocation effects of charged residues are primarily due to the DeltaPsi component of the pmf and not the pH component.

Topology of the Na+/proline transporter of Escherichia coli

Hydropathy profile analysis of the amino acid sequence of the Na+/proline transporter of Escherichia coli (PutP) suggests that the protein consists of 12 transmembrane domains (TMs) which are connected by hydrophilic loops (Nakao, T., Yamato, I., and Anraku, Y. (1987) Mol. Gen. Genet. 208, 70-75). We have tested this prediction by applying a gene fusion approach in combination with a Cys accessibility analysis and site-specific proteolysis. Characterization of a series of PutP-alkaline phosphatase (PhoA) and PutP-beta-galactosidase (LacZ) hybrid proteins yields a reciprocal activity pattern of the reporter proteins that is in agreement with the topology of TMs III to XII of the 12-helix model. Placement of the PutP-PhoA and PutP-LacZ junction sites closer to the N terminus does not yield conclusive results. As a prerequisite for further topology studies, a functional PutP molecule devoid of all five native Cys residues (Cys-free PutP) is generated. Subsequently, amino acids in Cys-free PutP are replaced individually with Cys, and the accessibility of the sulfhydryl groups is analyzed. Surprisingly, Cys residues placed close to the N terminus of PutP (Ile-3 --> Cys, Thr-5 --> Cys) or into putative TM II (Ser-71 --> Cys, Glu-75 --> Cys) are highly accessible to membrane permeant and impermeant thiol reagents in intact cells. In contrast, Cys at the C terminus (Ser-502 --> Cys) reacts only with the membrane permeant but not with the impermeant reagent in intact cells. These results contradict the 12-helix motif and indicate a periplasmic location of the N terminus whereas the C terminus faces the cytoplasm. In addition, a transporter with Cys in place of Leu-37 (putative periplasmic loop (pL2) shows the same accessibility pattern as the Cys at the C terminus. Furthermore, PutP which has been purified and reconstituted into proteoliposomes in an inside-out orientation, is readily cleaved by the endoproteinase AspN before Asp-33 (pL2), Asp-112 (putative cytoplasmic loop (cL3), Asp-262 (cL7), and Asp-356 (cL9). These results suggest a cytosolic location of Asp-33 and Leu-37, thereby implying the formation of an additional TM formed by amino acids of pL2. Based on these observations, a new secondary structure model is proposed according to which the protein consists of 13 TMs with the N terminus on the outside and the C terminus facing the cytoplasm. The 13-helix structure is discussed as a common topological motif for all members of the Na+/solute cotransporter family.