ε-Polylysine and next-generation dendrigraft poly-L-lysine: chemistry, activity, and applications in biopharmaceuticals

From genetic code to global health: the impact of nucleic acid vaccines on disease prevention and treatment

Vaccinology has revolutionized modern medicine, delivering groundbreaking solutions to prevent and control infectious diseases while pioneering innovative strategies to tackle non-infectious challenges, including cancer. Traditional vaccines faced inherent limitations, driving the evolution of next-generation vaccines such as subunit vaccines, peptide-based vaccines, and nucleic acid-based platforms. Among these, nucleic acid-based vaccines, including DNA and mRNA technologies, represent a major innovation. Pioneering studies in the 1990s demonstrated their ability to elicit immune responses by encoding specific antigens. Recent advancements in delivery systems and molecular engineering have overcome initial challenges, enabling their rapid development and clinical success. This review explores nucleic acid-based vaccines, including chemically modified variants, by examining their mechanisms, structural features, and therapeutic potential, while underscoring their pivotal role in modern immunization strategies and expanding applications across contemporary medicine.

Nanosystems for targeted drug Delivery: Innovations and challenges in overcoming the Blood-Brain barrier for neurodegenerative disease and cancer therapy

The evolution of sophisticated nanosystems has revolutionized biomedicine, notably in treating neurodegenerative diseases and cancer. These systems show potential in delivering medication precisely to affected tissues, improving treatment effectiveness while minimizing side effects. Nevertheless, a major hurdle in targeted drug delivery is breaching the blood-brain barrier (BBB), a selective shield separating the bloodstream from the brain and spinal cord. The tight junctions between endothelial cells in brain capillaries create a formidable physical barrier, alongside efflux transporters that expel harmful molecules. This presents a notable challenge for brain drug delivery. Nanosystems present distinct advantages in overcoming BBB challenges, offering enhanced drug efficacy, reduced side effects, improved stability, and controlled release. Despite their promise, challenges persist, such as the BBB's regional variability hindering uniform drug distribution. Efflux transporters can also limit therapeutic agent efficacy, while nanosystem toxicity necessitates rigorous safety evaluations. Understanding the long-term impact of nanomaterials on the brain remains crucial. Additionally, addressing nanosystem scalability, cost-effectiveness, and safety profiles is vital for widespread clinical implementation. This review delves into the advancements and obstacles of advanced nanosystems in targeted drug delivery for neurodegenerative diseases and cancer therapy, with a focus on overcoming the BBB.

Antibacterial polylysine-containing hydrogels for hemostatic and wound healing applications: preparation methods, current advances and future perspectives

The treatment of various types of wounds such as dermal wounds, multidrug resistant bacteria-infected wounds, and chronic diabetic wounds is one of the critical challenges facing healthcare systems. Delayed wound healing can impose a remarkable burden on patients and health care professionals. In this case, given their unique three-dimensional porous structure, biocompatibility, high hydrophilicity, capability to provide a moist environment while absorbing wound exudate, permeability to both gas and oxygen, and tunable mechanical properties, hydrogels with antibacterial function are one of the most promising candidates for wound healing applications. Polylysine is a cationic polymer with the advantages of inherent antibacterial properties, biodegradability, and biocompatibility. Therefore, its utilization to engineer antibacterial hydrogels for accelerating wound healing is of great interest. In this review, we initially discuss polylysine properties, and then focus on the most recent advances in polylysine-containing hydrogels (since 2016) prepared using various chemical and physical crosslinking methods for hemostasis and wound healing applications. Finally, the challenges and future directions in the engineering of these antibacterial hydrogels for wound healing are discussed.

Nanoparticle-Mediated Immunotherapy in Triple-Negative Breast Cancer

Triple-negative breast cancer (TNBC) is an aggressive subtype with the worst prognosis and highest recurrence rates. The treatment choices are limited due to the scarcity of endocrine and HER2 targets, except for chemotherapy. However, the side effects of chemotherapy restrict its long-term usage. Immunotherapy shows potential as a promising therapeutic strategy, such as inducing immunogenic cell death, immune checkpoint therapy, and immune adjuvant therapy. Nanotechnology offers unique advantages in the field of immunotherapy, such as improved delivery and targeted release of immunotherapeutic agents and enhanced bioavailability of immunomodulators. As well as the potential for combination therapy synergistically enhanced by nanocarriers. Nanoparticles-based combined application of multiple immunotherapies is designed to take the tactics of enhancing immunogenicity and reversing immunosuppression. Moreover, the increasing abundance of biomedical materials holds more promise for the development of this field. This review summarizes the advances in the field of nanoparticle-mediated immunotherapy in terms of both immune strategies for treatment and the development of biomaterials and presents challenges and hopes for the future.

Design and optimization of ε-poly-l-lysine with specific functions for diverse applications

ε-Poly-l-lysine (ε-PL) is a natural homo-poly(amino acid) which can be produced by microorganisms. With the advantages in broad-spectrum antimicrobial activity, biodegradability, and biocompatibility, ε-PL has been widely used as a preservative in the food industry. Different molecular architectures endow ε-PL and ε-PL-based materials with versatile applications. However, the microbial synthesis of ε-PL is currently limited by low efficiencies in genetic engineering and molecular architecture modification. This review presents recent advances in ε-PL production and molecular architecture modification of microbial ε-PL, with a focus on the current challenges and solutions for the improvement of the productivity and diversity of ε-PL. In addition, we highlight recent examples where ε-PL has been applied to expand the versability of edible films and nanoparticles in various applications. Commercial production and the challenges and future research directions in ε-PL biosynthesis are also discussed. Currently, although the main use of ε-PL is as a food preservative, ε-PL and ε-PL-based polymers have shown excellent application potential in biomedical fields. With the development of synthetic biology, the design and synthesis of ε-PL with a customized molecular architecture are possible in the near future. ε-PL-based polymers with specific functions will be a new trend in biopolymer manufacturing.

Hyperbranched Polylysine Exhibits a Collaborative Enhancement of the Antibiotic Capacity to Kill Gram-Negative Pathogens

In recent years, traditional antibiotic efficacy outcomes have rapidly diminished due to the advent of drug resistance, and the dose limitation value has increased due to the severe side effect of globalized healthcare. Therefore, novel strategies are required to resensitize resistant pathogens to antibiotics existing in the field and prevent the emergence of drug resistance. In this study, cationic hyperbranched polylysine (HBPL-6) was synthesized using the one-pot polymerization method. HBPL-6 exhibited excellent non-cytotoxicity and bio-solubility properties. The present study also showed that HBPL-6 altered the outer membrane (OM) integrity of Escherichia coli O157:H7, Salmonella typhimurium, and Pseudomonas aeruginosa PAO1 by improving their permeability levels. When administered at a safe dosage, HBPL-6 enhanced the accumulation of rifampicin (RIF) and erythromycin (ERY) in bacteria to restore the efficacy of the antibiotics used. Moreover, the combination of HBPL-6 with colistin (COL) reduced the antibiotic dosage, which was helpful in preventing further drug-resistance outcomes. Therefore, this research provides a new strategy for reducing the dosage of drugs used to combat Gram-negative (G-) bacteria through their synergistic effects.

Use of over-the-counter mouthwashes as an additional measure in individual oral prophylaxis on adults with plaque-induced gingivitis: a double-blind, parallel, randomized controlled trial

BACKGROUND

Plaque-induced gingivitis is a chronic inflammatory condition characterized by complete reversibility of tissue damage once the periodontal biofilm has been disorganised. The aim of this study was to evaluate the efficacy of two commercially available mouthwashes (MWs) versus a chlorhexidine (CHX) 0.12% MW in reducing gingival bleeding (GB) in adults with plaque-induced gingivitis.

METHODS

The present study was a double-blind, parallel, randomized controlled trial involving 6492 gingival sites (i.e. 39 subjects × 28 teeth × 6 sites/tooth) aged 18-75 years. During a 2-week period, subjects were randomized to receive MWs: a control CHX 0.12% MW (group C, 1818 sites); a MW test containing CHX 0.09% + Citrox®/P complex (group CX, 2628 sites); a MW test based on natural compounds (group P, 2016 sites). GB was assessed at the inclusion visit (T0) and after 2 weeks of MW use (T1). Analyses of GB were compared between groups and then restricted to subjects with bleeding sites between 10 and 30% (moderate gingivitis) or ≥ 30% (severe gingivitis) at T0. Pairwise comparisons were made between groups and logistic regression was used to identify correlates of GB (T1).

RESULTS

For total bleeding site analysis, GB reduction between T0 and T1 ranged from 23% (C), 26% (CX) and 36% (P), respectively (all p < 0.05). Multiple comparison between groups showed that group C was significantly less effective (p < 0.05) than groups CX and P. Splitting the analysis, in patients with severe gingivitis (≥ 30% bleeding sites at T0), all MWs had a positive effect on GB with a reduction at T1 of 36% (C), 33% (CX) and 42% (P), respectively. While GB reduction between T0 and T1, was significant for all groups, the comparison among groups showed no significant difference between group C and CX, whereas the improvement was significant for group P. On the other hand, in adults with moderate gingivitis (< 30% bleeding sites at T0), only CX and P had a positive effect on GB reduction at T1(9% in CX and 2% in P, respectively), although the differences between the three groups were not significant.

CONCLUSION

The daily use of MWs with natural components (groups P and CX) for 2 weeks should be considered positively as an adjunct to individual oral prophylaxis to reduce GB compared to the control MW containing CHX 0.12% (group C) in healthy adults with plaque-induced gingivitis. For subjects with severe gingivitis, it is advisable to first use natural MW (P) and then MW based on CHX 0.09% with natural components (CX), compared to MW with CHX 0.12% (C). For adults with moderate gingivitis, P and CX can be advisable, even if no definitive recommendations can be drawn.

TRIAL REGISTRATION

ACTRN12622000215729, 07/02/2022.

An immune-enhanced multivalent DNA nanovaccine to prevent H7 and H9 avian influenza virus in mice

H7 avian influenza virus has caused multiple human infections and poses a severe public health threat. In response to the highly variable nature of AIVs, a novel, easily regenerated DNA vaccine has great potential in treating or preventing avian influenza pandemics. Nevertheless, DNA vaccines have many disadvantages, such as weak immunogenicity and poor in vivo delivery. To further characterize and solve these issues and develop a novel H7 AIV DNA vaccine with enhanced stability and immunogenicity, we constructed nine AIV DNA plasmids, and the immunogenicity screened showed that mice immunized with pβH7N2SH9 elicited stronger hemagglutination-inhibiting (HI) antibodies than other eight plasmid DNAs. Then, to address the susceptibility to degradation and low transfection rate of DNA vaccine in vivo, we developed pβH7N2SH9/DGL NPs by encapsulating the pβH7N2SH9 within the dendrigraft poly-l-lysines nanoparticles. As expected, these NPs exhibited excellent physical and chemical properties, were capable of promote lymphocyte proliferation, and induce stronger humoral and cellular responses than the naked pβH7N2SH9, including higher levels of HI antibodies than naked pβH7N2SH9, as well as the production of cytokines, namely, IL-2, IFN-α. Taken together, our results suggest that the construction of an immune-enhanced H7-AIV DNA nanovaccine may be a promising strategy against most influenza viruses.

Enhance immune response to H9 AIV DNA vaccine based on polygene expression and DGL nanoparticle encapsulation

DNA vaccination has great potential to treat or prevent avian influenza pandemics, but the technique may be limited by low immunogenicity and gene delivery in clinical testing. Here, to improve the immune efficacy of DNA vaccines against avian influenza, we prepared and tested the immunogenicity of 4 recombinant DNA vaccines containing 2 or 3 AIV antigens. The results revealed that chickens and mice immunized with plasmid DNA containing 3 antigens (HA gene from H9N2, and NA and HA genes from H5N1) exhibited a robust immune response than chickens and mice immunized with plasmid DNAs containing 2 antigenic genes. Subsequently, this study used pβH9N1SH5 as a model antigen to study the effect of dendritic polylysine (DGL) nanoparticles as a gene delivery system and adjuvant on antigen-specific immunity in mice models. At a ratio of 1:3 DGL/pβH9N1SH5 (w/w), the pβH9N1SH5/DGL NPs showed excellent physical and chemical properties, induced higher levels of HI antibodies, and larger CD3+/CD4+ T lymphocyte and CD3+/CD8+ T lymphocyte population, as well as the production of cytokines, namely, interferon (IFN)-γ, interleukin (IL)-2 compared with the naked pβH9N1SH5. Therefore, multiantigen gene expression methods using DGL as a delivery system may have broad application prospects in gene therapy.

Antibacterial activity of epsilon-poly-l-lysine produced by Stenotrophomonas maltophilia HS4 and Paenibacillus polymyxa HS5, alone and in combination with bacteriophages

Over the past decades, antibiotic resistance has become a major clinical problem, and searching for new therapeutic strategies seems to be necessary. Using novel natural compounds, antimicrobial peptides, and bacteriophages is the most promising solution. In this study, various cationic metabolite-producer bacteria were isolated from different soil samples. Two isolates were identified as Stenotrophomonas maltophilia HS4 (accession number: MW791428) and Paenibacillus polymyxa HS5 (accession number: MW791430) based on biochemical characteristics and phylogenetic analysis using 16S rRNA gene sequences. The cationic compound in the fermentation broth was precipitated and purified with sodium tetraphenylborate salt. The purified cationic peptide was confirmed to be epsilon-poly-l-lysine by structural and molecular analysis using High-Performance Liquid Chromatography, Sodium dodecyl-sulfate-polyacrylamide gel electrophoresis, and Fourier-transform infrared spectroscopy. The antibacterial activity of epsilon-poly-l-lysine was evaluated against Staphylococcus aureus ATCC 25923, Escherichia coli ATCC 25922, Enterococcus faecalis ATCC 29212, Serratia marcescens ATCC 13880, and Klebsiella pneumoniae ATCC 13883 by microdilution method. Furthermore, the antibacterial effects of purified epsilon-poly-l-lysine in combination with two long non-contractile tail bacteriophages against vancomycin-resistant Enterococcus faecalis and colistin-resistant Klebsiella pneumoniae were investigated. The results indicated great antibacterial activity of epsilon-poly-l-lysine which was produced by two novel bacteria. The epsilon-poly-l-lysine as a potent cationic antimicrobial peptide is demonstrated to possess great antimicrobial activity against pathogenic and also antibiotic-resistant bacteria.

Effects of different conformations of polylysine on the anti-tumor efficacy of methotrexate nanoparticles

Drug delivery systems require that carrier materials have good biocompatibility, degradability, and constructability. Poly(amino acids), a substance with a distinctive secondary structure, not only have the basic features of the carrier materials but also have several reactive functional groups in the side chain, which can be employed as drug carriers to deliver anticancer drugs. The conformation of isomers of drug carriers has some influence on the preparation, morphology, and efficacy of nanoparticles. In this study, two isomers of polylysine, including ε-polylysine (ε-PL) and α-polylysine (α-PL), were used as drug carriers to entrap methotrexate (MTX) and construct nano-drug delivery systems. ε-PL/MTX nanoparticles with the morphology of helical nanorods presented a small particle size (115.0 nm), and relative high drug loading content (57.8 %). The anticancer effect of ε-PL/MTX nanoparticles was 1.3-fold and 2.6-fold stronger than that of α-PL/MTX nanoparticles in vivo and in vitro, respectively. ε-PL is an ideal drug carrier with potential clinical application prospects.

Biodegradable Polymeric Nanoparticles Loaded with Flavonoids: A Promising Therapy for Inflammatory Bowel Disease

Inflammatory bowel disease (IBD) is a group of disorders that cause chronic non-specific inflammation in the gastrointestinal (GI) tract, primarily affecting the ileum and colon. The incidence of IBD has risen sharply in recent years. Despite continuous research efforts over the past decades, the aetiology of IBD is still not fully understood and only a limited number of drugs are available for its treatment. Flavonoids, a ubiquitous class of natural chemicals found in plants, have been widely used in the prevention and treatment of IBD. However, their therapeutic efficacy is unsatisfactory due to poor solubility, instability, rapid metabolism, and rapid systemic elimination. With the development of nanomedicine, nanocarriers can efficiently encapsulate various flavonoids and subsequently form nanoparticles (NPs), which greatly improves the stability and bioavailability of flavonoids. Recently, progress has also been made in the methodology of biodegradable polymers that can be used to fabricate NPs. As a result, NPs can significantly enhance the preventive or therapeutic effects of flavonoids on IBD. In this review, we aim to evaluate the therapeutic effect of flavonoid NPs on IBD. Furthermore, we discuss possible challenges and future perspectives.

Biomedical materials for wound dressing: recent advances and applications

Wound healing is vital to maintain the physiological functions of the skin. The most common treatment is the use of a dressing to cover the wound and reduce infection risk and the rate of secondary injuries. Modern wound dressings have been the top priority choice for healing various types of wounds owing to their outstanding biocompatibility and biodegradability. In addition, they also maintain temperature and a moist environment, aid in pain relief, and improve hypoxic environments to stimulate wound healing. Due to the different types of wounds, as well as the variety of advanced wound dressing products, this review will provide information on the clinical characteristics of the wound, the properties of common modern dressings, and the in vitro, in vivo as well as the clinical trials on their effectiveness. The most popular types commonly used in producing modern dressings are hydrogels, hydrocolloids, alginates, foams, and films. In addition, the review also presents the polymer materials for dressing applications as well as the trend of developing these current modern dressings to maximize their function and create ideal dressings. The last is the discussion about dressing selection in wound treatment and an estimate of the current development tendency of new materials for wound healing dressings.

Dendrimers as Modifiers of Inorganic Nanoparticles for Therapeutic Delivery in Cancer

The formulation of nanoscale systems with well-defined sizes and shapes is of great interest in applications such as drug and gene delivery, diagnostics and imaging. Dendrimers are polymers that have attracted interest due to their size, shape, branching length, amine density, and surface functionalities. These unique characteristics of dendrimers set them apart from other polymers, their ability to modify nanoparticles (NPs) for biomedical applications. Dendrimers are spherical with multiple layers over their central core, each representing a generation. Their amphiphilic nature and hollow structure allow for the incorporation of multiple drugs or genes, in addition to enabling easy surface modification with cellular receptor-targeting moieties to ensure site-specific delivery of therapeutics. Dendrimers are employed in chemotherapeutic applications for the delivery of anticancer drugs. There are many inorganic NPs currently being investigated for cancer therapy, each with their own unique biological, chemical, and physical properties. To favor biomedical applications, inorganic NPs require suitable polymers to ensure stability, biodegradability and target specificity. The success of dendrimers is dependent on their unique structure, good bioavailability and stability. In this review, we describe the properties of dendrimers and their use as modifiers of inorganic NPs for enhanced therapeutic delivery. Herein, we review the significant developments in this area from 2015 to 2022. Databases including Web of Science, Scopus, Google Scholar, Science Direct, BioMed Central (BMC), and PubMed were searched for articles using dendrimers, inorganic nanoparticles and cancer as keywords.

Nanoparticle drug delivery systems for synergistic delivery of tumor therapy

Nanoparticle drug delivery systems have proved anti-tumor effects; however, they are not widely used in tumor therapy due to insufficient ability to target specific sites, multidrug resistance to anti-tumor drugs, and the high toxicity of the drugs. With the development of RNAi technology, nucleic acids have been delivered to target sites to replace or correct defective genes or knock down specific genes. Also, synergistic therapeutic effects can be achieved for combined drug delivery, which is more effective for overcoming multidrug resistance of cancer cells. These combination therapies achieve better therapeutic effects than delivering nucleic acids or chemotherapeutic drugs alone, so the scope of combined drug delivery has also been expanded to three aspects: drug-drug, drug-gene, and gene-gene. This review summarizes the recent advances of nanocarriers to co-delivery agents, including i) the characterization and preparation of nanocarriers, such as lipid-based nanocarriers, polymer nanocarriers, and inorganic delivery carriers; ii) the advantages and disadvantages of synergistic delivery approaches; iii) the effectual delivery cases that are applied in the synergistic delivery systems; and iv) future perspectives in the design of nanoparticle drug delivery systems to co-deliver therapeutic agents.

Physiological and transcriptome analysis of Candida albicans in response to X33 antimicrobial oligopeptide treatment

Introduction

Candida albicans is an opportunistic pathogenic fungus, which frequently causes systemic or local fungal infections in humans. The evolution of its drug-resistant mutants necessitate an urgent development of novel antimicrobial agents.

Results

Here, we explored the antimicrobial activity and inhibitory mechanisms of X33 antimicrobial oligopeptide (X33 AMOP) against C. albicans. The oxford cup test results showed that X33 AMOP had strong inhibitory activity against C. albicans, and its MIC and MFC were 0.625 g/L and 2.5 g/L, respectively. Moreover, SEM and TEM showed that X33 AMOP disrupted the integrity of cell membrane. The AKP, ROS, H₂O₂ and MDA contents increased, while the reducing sugar, soluble protein, and pyruvate contents decreased after the X33 AMOP treatment. This indicated that X33 AMOP could damage the mitochondrial integrity of the cells, thereby disrupting the energy metabolism by inducing oxidative stress in C. albicans. Furthermore, transcriptome analysis showed that X33 AMOP treatment resulted in the differential expression of 1140 genes, among which 532 were up-regulated, and 608 were down-regulated. These DEGs were related to protein, nucleic acid, and carbohydrate metabolism, and their expression changes were consistent with the changes in physiological characteristics. Moreover, we found that X33 AMOP could effectively inhibit the virulence attributes of C. albicans by reducing phospholipase activity and disrupting hypha formation.

Discussion

These findings provide the first-ever detailed reference for the inhibitory mechanisms of X33 AMOP against C. albicans and suggest that X33 AMOP is a potential drug candidate for treating C. albicans infections.

Nanoparticles in Drug Delivery: From History to Therapeutic Applications

Current research into the role of engineered nanoparticles in drug delivery systems (DDSs) for medical purposes has developed numerous fascinating nanocarriers. This paper reviews the various conventionally used and current used carriage system to deliver drugs. Due to numerous drawbacks of conventional DDSs, nanocarriers have gained immense interest. Nanocarriers like polymeric nanoparticles, mesoporous nanoparticles, nanomaterials, carbon nanotubes, dendrimers, liposomes, metallic nanoparticles, nanomedicine, and engineered nanomaterials are used as carriage systems for targeted delivery at specific sites of affected areas in the body. Nanomedicine has rapidly grown to treat certain diseases like brain cancer, lung cancer, breast cancer, cardiovascular diseases, and many others. These nanomedicines can improve drug bioavailability and drug absorption time, reduce release time, eliminate drug aggregation, and enhance drug solubility in the blood. Nanomedicine has introduced a new era for drug carriage by refining the therapeutic directories of the energetic pharmaceutical elements engineered within nanoparticles. In this context, the vital information on engineered nanoparticles was reviewed and conferred towards the role in drug carriage systems to treat many ailments. All these nanocarriers were tested in vitro and in vivo. In the coming years, nanomedicines can improve human health more effectively by adding more advanced techniques into the drug delivery system.

The Real-Time Validation of the Effectiveness of Third-Generation Hyperbranched Poly(ɛ-lysine) Dendrons-Modified KLVFF Sequences to Bind Amyloid-β1-42 Peptides Using an Optical Waveguide Light-Mode Spectroscopy System

The aggregation of cytotoxic amyloid peptides (Aβ_1-42) is widely recognised as the cause of brain tissue degeneration in Alzheimer's disease (AD). Indeed, evidence indicates that the deposition of cytotoxic Aβ_1-42 plaques formed through the gradual aggregation of Aβ_1-42 monomers into fibrils determines the onset of AD. Thus, distinct Aβ_1-42 inhibitors have been developed, and only recently, the use of short linear peptides has shown promising results by either preventing or reversing the process of Aβ_1-42 aggregation. Among them, the KLVFF peptide sequence, which interacts with the hydrophobic region of Aβ_16-20, has received widespread attention due to its ability to inhibit fibril formation of full-length Aβ_1-42. In this study, hyperbranched poly-L-lysine dendrons presenting sixteen KLVFF at their uppermost molecular branches were designed with the aim of providing the KLVFF sequence with a molecular scaffold able to increase its stability and of improving Aβ_1-42 fibril formation inhibitory effect. These high-purity branched KLVFF were used to functionalise the surface of the metal oxide chip of the optical waveguide lightmode spectroscopy sensor showing the more specific, accurate and rapid measurement of Aβ_1-42 than that detected by linear KLVFF peptides.

Nanoparticles-mediated CRISPR-Cas9 gene therapy in inherited retinal diseases: applications, challenges, and emerging opportunities

Inherited Retinal Diseases (IRDs) are considered one of the leading causes of blindness worldwide. However, the majority of them still lack a safe and effective treatment due to their complexity and genetic heterogeneity. Recently, gene therapy is gaining importance as an efficient strategy to address IRDs which were previously considered incurable. The development of the clustered regularly-interspaced short palindromic repeats (CRISPR)-CRISPR-associated protein 9 (Cas9) system has strongly empowered the field of gene therapy. However, successful gene modifications rely on the efficient delivery of CRISPR-Cas9 components into the complex three-dimensional (3D) architecture of the human retinal tissue. Intriguing findings in the field of nanoparticles (NPs) meet all the criteria required for CRISPR-Cas9 delivery and have made a great contribution toward its therapeutic applications. In addition, exploiting induced pluripotent stem cell (iPSC) technology and in vitro 3D retinal organoids paved the way for prospective clinical trials of the CRISPR-Cas9 system in treating IRDs. This review highlights important advances in NP-based gene therapy, the CRISPR-Cas9 system, and iPSC-derived retinal organoids with a focus on IRDs. Collectively, these studies establish a multidisciplinary approach by integrating nanomedicine and stem cell technologies and demonstrate the utility of retina organoids in developing effective therapies for IRDs.

Self-assembly of Peptide dendrimers and their bio-applications in theranostics

Nanotechnology has brought revolutionized advances in disease diagnosis and therapy. Self-assembled peptide dendrimers own novel physicochemical properties through the synergistic effects of the polypeptide chain, dendrimer and nano-structure, exhibiting great potential in theranostic. This review provides comprehensive insights into various peptide dendrimers for self-assembly. Their nanosize, morphology and composition are presented to understand self-assembly behaviors precisely. We further introduce the emerging theranostic applications based on specific imaging and efficient delivery recently.

Coating CoCrMo Alloy with Graphene Oxide and ε-Poly-L-Lysine Enhances Its Antibacterial and Antibiofilm Properties

INTRODUCTION

With increases in implant infections, the search for antibacterial and biofilm coatings has become a new interest for orthopaedists and dentists. In recent years, graphene oxide (GO) has been extensively studied for its superior antibacterial properties. However, most of these studies have focused on solutions and there are few antibacterial studies on metal surfaces, especially the surfaces of cobalt-chromium-molybdenum (CoCrMo) alloys. ε-Poly-L-lysine (ε-PLL), as a novel food preservative, has a spectrum of antimicrobial activity; however, its antimicrobial activity after coating an implant surface is not clear.

METHODS

In this study, for the first time, a two-step electrodeposition method was used to coat GO and ε-PLL on the surface of a CoCrMo alloy. Its antibacterial and antibiofilm properties against S. aureus and E. coli were then studied.

RESULTS

The results show that the formation of bacteria and biofilms on the coating surface was significantly inhibited, GO and ε-PLL composite coatings had the best antibacterial and antibiofilm effects, followed by ε-PLL and GO coatings. In terms of classification, the coatings are anti-adhesive and contact-killing/inhibitory surfaces. In addition to oxidative stress, physical damage to GO and electrostatic osmosis of ε-PLL are the main antibacterial and antibiofilm mechanisms.

DISCUSSION

This is the first study that GO and ε-PLL coatings were successfully prepared on the surface of CoCrMo alloy by electrodeposition. It provides a promising new approach to the problem of implant infection in orthopedics and stomatology.

Highly Branched Polymers Based on Poly(amino acid)s for Biomedical Application

Polymers consisting of amino acid building blocks continue to receive consideration for biomedical applications. Since poly(amino acid)s are built from natural amino acids, the same building blocks proteins are made of, they are biocompatible, biodegradable and their degradation products are metabolizable. Some amino acids display a unique asymmetrical AB2 structure, which facilitates their ability to form branched structures. This review compares the three forms of highly branched polymeric structures: structurally highly organized dendrimers, dendrigrafts and the less organized, but readily synthesizable hyperbranched polymers. Their syntheses are reviewed and compared, methods of synthesis modulations are considered and variations on their traditional syntheses are shown. The potential use of highly branched polymers in the realm of biomedical applications is discussed, specifically their applications as delivery vehicles for genes and drugs and their use as antiviral compounds. Of the twenty essential amino acids, L-lysine, L-glutamic acid, and L-aspartic acid are asymmetrical AB2 molecules, but the bulk of the research into highly branched poly(amino acid)s has focused on the polycationic poly(L-lysine) with a lesser extent on poly(L-glutamic acid). Hence, the majority of potential applications lies in delivery systems for nucleic acids and this review examines and compares how these three types of highly branched polymers function as non-viral gene delivery vectors. When considering drug delivery systems, the small size of these highly branched polymers is advantageous for the delivery of inhalable drug. Even though highly branched polymers, in particular dendrimers, have been studied for more than 40 years for the delivery of genes and drugs, they have not translated in large scale into the clinic except for promising antiviral applications that have been commercialized.

Recent Advances in Epsilon-Poly-L-Lysine and L-Lysine-Based Dendrimer Synthesis, Modification, and Biomedical Applications

With the advantages in biocompatibility, antimicrobial ability, and comparative facile synthesis technology, poly-L-lysine (PLL) has received considerable attention in recent years. Different arrangement forms and structures of the backbone endow lysine-based polymers with versatile applications, especially for ε-poly-L-lysine (EPL) and lysine-based dendrimer (LBD) compounds. This review summarized the advanced development of the synthesis and modification strategies of EPL and LBD, focus on the modification of bio-synthesis and artificial synthesis, respectively. Meanwhile, biomedical fields, where EPL and LBD are mainly utilized, such as agents, adjuvants, or carriers to anti-pathogen or used in tumor or gene therapies, are also introduced. With the deeper of knowledge of pharmacodynamics and pharmacokinetics of the drug system, the design and synthesis of these drugs can be further optimized. Furthermore, the performances of combination with other advanced methodologies and technologies demonstrated that challenges, such as scale production and high expenses, will not hinder the prospective future of lysine-based polymers.

Rapid detection of total bacteria in foods using a poly-l-lysine-based lateral-flow assay

Food safety and freshness are evaluated according to microbiological load. To analyze this load rapidly, a poly-_l-lysine-based lateral-flow assay (PLFA) was developed. A total of 90 strains of bacteria that are often detected in spoiled foods, including Enterobacteriaceae, lactic acid bacteria, Pseudomonas, and Bacillus were detected using the PLFA. A positive signal was obtained when the bacterial concentration was ≥6 log₁₀ (cfu/test). A total of 36 fresh foods (meats, pastries, lettuces, cabbages, radishes, and sprouts) and corresponding spoiled foods were cultured for 0, 3, 6, and 9 h to investigate how many hours were required for microbial detection using PLFA. The higher the number of bacteria in a food, the shorter was the culture time required for PLFA-positive results to be obtained, so the distinction between fresh and spoiled food could be made based on the time taken for the culture to become PLFA-positive. The coefficient of determination of the least squares regression between the time to become PLFA-positive and the initial log₁₀ (cfu/g) bacterial count for the food was 0.9888. The test time for the PLFA, including pretreatment, was approximately 15-30 min. This novel method will enable the detection of total bacteria on the food processing site.

Understanding the Pharmaceutical Aspects of Dendrimers for the Delivery of Anticancer Drugs

Dendrimers are emerging class of nanoparticles used in targeted drug delivery systems. These are radially symmetric molecules with well-defined, homogeneous, and monodisperse structures. Due to the nano size, they can easily cross the biological membrane and increase bioavailability. The surface functionalization facilitates targeting of the particular site of action, assists the high drug loading and improves the therapeutic efficiency of the drug. These properties make dendrimers advantageous over conventional drug delivery systems. This article explains the features of dendrimers along with their method of synthesis, such as divergent growth method, convergent growth method, double exponential and mixed method, hyper-core and branched method. Dendrimers are effectively used in anticancer delivery and can be targeted at the site of tumor either by active or passive targeting. There are three mechanisms by which drugs interact with dendrimers, and they are physical encapsulation, electrostatic interaction, chemical conjugation of drug molecules. Drug releases from dendrimer either by in vivo cleavage of the covalent bond between drugdendrimer complexes or by physical changes or stimulus like pH, temperature, etc.

Nanotechnology-Based Antimicrobial and Antiviral Surface Coating Strategies

Biocontamination of medical devices and implants is a growing issue that causes medical complications and increased expenses. In the fight against biocontamination, developing synthetic surfaces, which reduce the adhesion of microbes and provide biocidal activity or combinatory effects, has emerged as a major global strategy. Advances in nanotechnology and biological sciences have made it possible to design smart surfaces for decreasing infections. Nevertheless, the clinical performance of these surfaces is highly depending on the choice of material. This review focuses on the antimicrobial surfaces with functional material coatings, such as cationic polymers, metal coatings and antifouling micro-/nanostructures. One of the highlights of the review is providing insights into the virus-inactivating surface development, which might particularly be useful for controlling the currently confronted pandemic coronavirus disease 2019 (COVID-19). The nanotechnology-based strategies presented here might be beneficial to produce materials that reduce or prevent the transmission of airborne viral droplets, once applied to biomedical devices and protective equipment of medical workers. Overall, this review compiles existing studies in this broad field by focusing on the recent related developments, draws attention to the possible activity mechanisms, discusses the key challenges and provides future recommendations for developing new, efficient antimicrobial and antiviral surface coatings.

Hyaluronan/Poly-L-lysine/Berberine Nanogels for Impaired Wound Healing

Physiological wound healing process can be delayed in the presence of certain pathologies, such as diabetes or cancer. In this perspective, the aim of this study was to design a new nanogel platform of hyaluronan, poly-L-lysine and berberine suitable for wound treatment. Two different nanogel formulations were selected after a first formulation screening. They were prepared by adding dropwise 2 mg/mL hyaluronan aqueous solution (200 or 700 kDa) to 1.25 mg/mL poly-L-lysine aqueous solution. Blank nanogels formulated with 200 kDa HA resulted stable after freeze-drying with dimensions, polydispersity index and zeta potential of 263.6 ± 13.1 nm, 0.323 ± 0.029 and 32.7 ± 3.5 mV, respectively. Both blank and berberine-loaded nanogels showed rounded-shape structures. Loaded nanogels released nearly 50% of loaded berberine within 45 min, whereas the remaining 50% was released up to 24 h in vitro. Both, blank and berberine-loaded nanogels were able to completely close the fibroblasts gap in 42 h.

Dendrigraft poly-L-lysines delivery of DNA vaccine effectively enhances the immunogenic responses against H9N2 avian influenza virus infection in chickens

Biodegradable nanomaterials can protect antigens from degradation, promote cellular absorption, and enhance immune responses. We constructed a eukaryotic plasmid [pCAGGS-opti441-hemagglutinin (HA)] by inserting the optimized HA gene fragment of H9N2 AIV into the pCAGGS vector. The pCAGGS-opti441-HA/DGL was developed through packaging the pCAGGS-opti441-HA with dendrigraft poly-l-lysines (DGLs). DGL not only protected the pCAGGS-opti441-HA from degradation, but also exhibited high transfection efficiency. Strong cellular immune responses were induced in chickens immunized with the pCAGGS-opti441-HA/DGL. The levels of IFN-γ and IL-2, and lymphocyte transformation rate of the vaccinated chickens increased at the third week post the immunization. For the vaccinated chickens, T lymphocytes were activated and proliferated, the numbers of CD3+CD4+ and CD4+/CD8+ increased, and the chickens were protected completely against H9N2 AIV challenge. This study provides a method for the development of novel AIV vaccines, and a theoretical basis for the development of safe and efficient gene delivery carriers.

Polysaccharide-Peptide Cryogels for Multidrug-Resistant-Bacteria Infected Wound Healing and Hemostasis

Wound dressings that can simultaneously treat bacterial infections and various bleeding complications are highly desirable in clinics. Moreover, multidrug-resistant (MDR) bacterial infection has posed another great challenge for clinical wound care, as there are fewer effective antimicrobial agents available for killing these bacteria. To meet the clinical need, serials of polysaccharide-peptide cryogels have been developed with excellent antibacterial efficacy and hemostatic property. With glycol chitosan (GC) and ε-poly lysine (EPL) as the major components, the cryogels yield significantly lower amounts of blood loss compared with commercially available hemostatic dressings. The incorporation of EPL significantly enhances the antibacterial activity including killing MDR bacteria capacity and prevents the bacterial infection of skin wounds. The cryogel treated wounds demonstrate significantly higher healing efficiency compared to the controlled MDR bacteria infected wounds. The GC-EPL polysaccharide-peptide cryogels may become competitive multifunctional wound dressings for bleeding control and bacteria-infected wound healing.

Therapeutic potential of polypeptide-based conjugates: Rational design and analytical tools that can boost clinical translation

The clinical success of polypeptides as polymeric drugs, covered by the umbrella term "polymer therapeutics," combined with related scientific and technological breakthroughs, explain their exponential growth in the development of polypeptide-drug conjugates as therapeutic agents. A deeper understanding of the biology at relevant pathological sites and the critical biological barriers faced, combined with advances regarding controlled polymerization techniques, material bioresponsiveness, analytical methods, and scale up-manufacture processes, have fostered the development of these nature-mimicking entities. Now, engineered polypeptides have the potential to combat current challenges in the advanced drug delivery field. In this review, we will discuss examples of polypeptide-drug conjugates as single or combination therapies in both preclinical and clinical studies as therapeutics and molecular imaging tools. Importantly, we will critically discuss relevant examples to highlight those parameters relevant to their rational design, such as linking chemistry, the analytical strategies employed, and their physicochemical and biological characterization, that will foster their rapid clinical translation.

An overview of biodegradable nanomaterials and applications in vaccines

Vaccination is the most cost-effective and sustainable way to prevent and eliminate infectious diseases. Compared with traditional vaccines, novel vaccines have better stability, longer duration and require less antigen usage. In addition, novel vaccines have better immune effects and significantly less toxic side effects. However, both novel vaccines and traditional vaccines require carrier molecules or adjuvants to produce an optimal immune response. There is an increasing demand for vaccine adjuvants and delivery systems that can induce stronger immune response whilst reducing production cost and the dose of vaccine. In recent years, nanotechnology has played an important role in the development of novel vaccine adjuvants and nano-delivery systems. Biodegradable materials have also received a lot of attention in medical science because they have excellent biocompatibility, biodegradability and low toxicity, which can protect antigens from degradation, increase antigen stability and provide slow release; resulting in enhanced immunogenicity. Therefore, biodegradable nanoparticles have attracted much attention in the formulation of vaccines. In this review, we outline some key features of biodegradable nanomaterials in the developing safer and more effective vaccines. The properties, structural characteristics, advantages and disadvantage of the biodegradable nanomaterials will be systematically reviewed. Additionally, applications, research progress and future prospects of biodegradable nanomaterials are discussed. This review will be help in future research work directed at developing biodegradable vaccine adjuvants or delivery carriers.

Peptide dendrimers as valuable biomaterials in medical sciences

Peptides are oligomers of amino acids, which have been used in a wide range of applications, particularly in medical and pharmaceutical sciences. Linear peptides have been extensively developed in various fields of medicine as therapeutics or targeting agents. The branched structure of peptide dendrimers with peptide (commonly, poly l‑Lysine) or non-peptide (commonly poly‑amidoamine) core, often exhibits valuable novel features, improves stability and enhances the functionality of peptide in comparison with small linear peptides. The potential applications of Branched and hyper-branched peptidic structures which are known as peptide dendrimers in biomedical sciences have been approved vastly. A peptide dendrimer contains three distinct parts including core, building blocks and branching units or surface functional groups. These structures provide a lot of opportunities in the pharmaceutical field, particularly for novel drug development. In this review, a brief summary of different biomedical applications of peptide dendrimers is presented, and peptide dendrimers as active pharmaceutical ingredients and drug delivery carriers are discussed. Applications of peptide dendrimers in vaccines and diagnostic tools are also presented, in brief. Generally, peptide dendrimers are promising biomaterials with high evolution rate for clinical and non-clinical applications in medicine.

pH-Responsive Polypeptide-Based Smart Nano-Carriers for Theranostic Applications

Smart nano-carriers have attained great significance in the biomedical field due to their versatile and interesting designs with different functionalities. The initial stages of the development of nanocarriers mainly focused on the guest loading efficiency, biocompatibility of the host and the circulation time. Later the requirements of less side effects with more efficacy arose by attributing targetability and stimuli-responsive characteristics to nano-carriers along with their bio- compatibility. Researchers are utilizing many stimuli-responsive polymers for the better release of the guest molecules at the targeted sites. Among these, pH-triggered release achieves increasing importance because of the pH variation in different organ and cancer cells of acidic pH. This specific feature is utilized to release the guest molecules more precisely in the targeted site by designing polymers having specific functionality with the pH dependent morphology change characteristics. In this review, we mainly concert on the pH-responsive polypeptides and some interesting nano-carrier designs for the effective theranostic applications. Also, emphasis is made on pharmaceutical application of the different nano-carriers with respect to the organ, tissue and cellular level pH environment.

ε-Poly-l-Lysine/plasmid DNA nanoplexes for efficient gene delivery in vivo

The present work addresses the development and characterization of ε-Poly-l-Lysine/pDNA polyplexes and evaluation for their improved transfection efficacy and safety as compared to polyplexes prepared using Poly-l-Lysine and SuperFect®. Self-assembling polyplexes were prepared by varying the N/P ratio to obtain the optimum size, a net positive zeta potential and gel retardation. The stability in presence of DNase I and serum was assured using gel retardation assay. Their appreciable uptake in MCF-7 and 3.5, 3.79 and 4.79-fold higher transfection compared to PLL/pDNA polyplexes and 1.60, 1.53 and 1.79-fold higher transfection compared to SuperFect®/pDNA polyplexes in MCF-7, HeLa and HEK-293 cell lines respectively, affirmed the enhanced transfection of ε-PLL/pDNA polyplexes which was well supported with in vivo transfection and gene expression studies. The <8% in vitro hemolysis and >98% viability of MCF-7, HeLa and HEK-293 cells in presence of ε-PLL/pDNA polyplexes addressed their safety, which was also ensured using in vivo toxicity studies, where hemocompatibility, unaltered levels of biochemical markers and histology of vital organs confirmed ε-PLL to be an effective and safer alternative for non-viral genetic vectors.

Dual Regulations of Thermosensitive Heparin-Poloxamer Hydrogel Using ε-Polylysine: Bioadhesivity and Controlled KGF Release for Enhancing Wound Healing of Endometrial Injury

Hydrogel was not only used as an effective support matrix to prevent intrauterine adhesion after endometrial injury but also served as scaffold to sustain release of some therapeutics, especially growth factor. However, because of the rapid turnover of the endometrial mucus, the poor retention and bad absorption of therapeutic agents in damaged endometrial cavity were two important factors hindering their pharmacologic effect. Herein, a mucoadhesive hydrogel was described by using heparin-modified poloxamer (HP) as the matrix material and ε-polylysine (EPL) as functional excipient. Various EPL-HP hydrogels formulations are screened by rheological evaluation and mucoadhesion studies. It was found that the rheological and mucoadhesive properties of EPL-HP hydrogels were easily controlled by changing the amount of EPL in formulation. The storage modulus of EPL-HP hydrogel with 90 μg/mL of EPL (EPL-HP-90) was elevated to be 1.9 × 10⁵ Pa, in accordance with the adhesion force rising to 3.18 N (10-fold higher than HP hydrogels). Moreover, in vitro release of model drug keratinocyte growth factor (KGF) from EPL-HP hydrogel was significantly accelerated by adding EPL in comparison with HP hydrogel. Both strong mucoadhesive ability and the accelerated drug release behavior for EPL-HP-90 made more of the encapsulated KGF absorbed by the uterus basal layer and endometrial glands after 8 h of administration in uterus cavity. Meanwhile, the morphology of endometrium in the injured uterus was repaired well after 3 d of treatment with KGF-EPL-HP-90 hydrogels. Compared with KGF-HP group, not only proliferation of endometrial epithelial cell and glands but also angiogenesis in the regenerated endometrium was obviously enhanced after treatment with KGF-EPL-HP-90 hydrogels. Alternatively, the cellular apoptosis in the damaged endometrium was significantly inhibited after treatment with KGF-EPL-HP-90 hydrogels. Overall, the mucoadhesive EPL-HP hydrogel with a suitable KGF release profile may be a more promising approach than HP hydrogel alone to repair the injured endometrium.

Enhanced Prophylactic and Therapeutic Effects of Polylysine-Modified Ara h 2 DNA Vaccine in a Mouse Model of Peanut Allergy

BACKGROUND

The prevalence of food allergy has been increasing, but treatment is very limited. DNA vaccination has been recognized as a promising method for the treatment of allergic diseases; however, poor immunogenicity has hindered its application.

METHODS

BALB/c mice were intradermally injected with plasmid DNA encoding the peanut protein Ara h 2 (pAra h 2) or pAra h 2 pretreated with poly-L- lysine (PLL) before or after sensitization with Ara h 2 protein. Ara h 2-specific antibodies were measured by ELISA. CD207+ dendritic cells (DCs) and Treg cells in draining lymph nodes were analyzed by flow cytometry after DNA immunization, and cytokine production in splenocytes was also analyzed.

RESULTS

In the prophylactic study, pretreatment with pAra h 2 or PLL-pAra h 2 resulted in lower levels of Ara h 2-specific IgG1, IgG2a, and IgE after sensitization with Ara h 2 protein, and mice in the PLL-pAra h 2 group had a significantly lower level of antibodies than those in the pAra h 2 group. In the treatment study, intradermal injection with pAra h 2 or PLL-pAra h 2 after Ara h 2 protein sensitization significantly decreased the level of Ara h 2-specific antibodies, and PLL- pAra h 2 had stronger effects than pAra h 2. There were increased numbers of CD207+ DCs and Treg cells in the mice receiving intradermal injection with PLL-pAra h 2, and splenocytes from PLL-pAra h 2-treated mice secreted increased levels of IFN-γ and IL-10.

CONCLUSIONS

Modification of pAra h 2 with PLL improved its prophylactic and therapeutic effects in peanut-allergic mice.