Influence of in vitro differentiation status on the in vivo bone regeneration of cell/chitosan microspheres using a rat cranial defect model

Identification of mesenchymal stem cell populations with high osteogenic potential using difference in cell division rate

Introduction

In bone regenerative medicine, mesenchymal stem cells (MSCs) have been widely investigated for their potential in bone regeneration. However, MSCs are a heterogeneous cell population containing a variety of cell types, making it difficult to obtain a homogeneous MSC population sufficient for tissue regeneration. Our group previously reported that by selecting rapidly dividing human auricular chondrocytes, it was possible to enrich for more chondrogenic cells. In this study, we aimed to identify a highly osteogenic MSC population by using a similar approach for mouse bone marrow MSCs.

Methods

Mouse bone marrow MSCs were fluorescently labeled with carboxyfluorescein succinimidyl ester (CFSE) and sorted according to the fluorescence intensity using flow cytometry on day 3 after labeling. To compare the ability to produce bone matrix in vitro, osteogenic differentiation cultures were performed and mineral deposition was confirmed by alizarin red staining. Real-time qPCR was also performed to examine the differences in gene expression between the fast- and slow-dividing cell groups immediately after aliquoting and after osteogenic differentiation.

Results

Differences in the growth rate of the fractionated cells were maintained after culture. Results of osteogenic differentiation culture and alizarin red staining showed more extensive mineral deposition in the slow cell group than in the fast cell group. Calcium quantification also showed higher absorbance in the slow cell group compared to the fast cell group, indicating higher osteogenic differentiation potential in the slow cell group. Furthermore, real-time qPCR analysis showed that osteocalcin expression was higher in the slow cell group in cells immediately after preparative differentiation. In addition, the expression of osteocalcin and sclerostin were higher in the slow cells after osteogenic differentiation.

Conclusion

The slow cell population contains many highly differentiated cells that are already more deeply committed to the bone lineage, suggesting that they have higher osteogenic differentiation potential than the fast cell population. This study will contribute to the realization of better bone regenerative medicine by utilizing the high osteogenic differentiation potential of the slow cell population.

An In Vivo Assessment of Different Mesenchymal Stromal Cell Tissue Types and Their Differentiation State on a Shape Memory Polymer Scaffold for Bone Regeneration

A combined biomaterial and cell-based solution to heal critical size bone defects in the craniomaxillofacial area is a promising alternative therapeutic option to improve upon autografting, the current gold standard. A shape memory polymer (SMP) scaffold, composed of biodegradable poly(ε-caprolactone) and coated with bioactive polydopamine, was evaluated with mesenchymal stromal cells (MSCs) derived from adipose (ADSC), bone marrow (BMSC), or umbilical cord (UCSC) tissue in their undifferentiated state or pre-differentiated toward osteoblasts for bone healing in a rat calvarial defect model. Pre-differentiating ADSCs and UCSCs resulted in higher new bone volume fraction (15.69% ± 1.64%) compared to empty (i.e., untreated) defects and scaffold-only (i.e., unseeded) groups (4.41% ± 1.11%). Notably, only differentiated UCSCs exhibited a significant increase in new bone volume, surpassing both undifferentiated UCSCs and unseeded scaffolds. Further, differentiated ADSCs and UCSCs had significantly higher trabecular numbers than their undifferentiated counterparts, unseeded scaffolds, and untreated defects. Although the mineral density regenerated within the unseeded scaffold surpassed that achieved with cell seeding, the connectivity of this bone was diminished, as the regenerated tissue confined itself to the spherical morphology of the scaffold pores. The SMP scaffold alone, with undifferentiated BMSCs, with undifferentiated and differentiated ADSCs, and differentiated UCSCs (29.72 ± 1.49 N) demonstrated significant osseointegration compared to empty defects (14.34 ± 2.21 N) after 12 weeks of healing when assessed by mechanical push-out testing. Based on these results and tissue availability to obtain the cells, pre-differentiated ADSCs and UCSCs emerge as particularly promising candidates when paired with the SMP scaffold for repairing critical size bone defects in the craniofacial skeleton.

Extracellular matrix-mimicking nanofibrous chitosan microspheres as cell micro-ark for tissue engineering

In the present study, extracellular matrix (ECM)-mimicking nanofibrous chitosan microspheres (NCM) were developed via thermal induction of chitosan molecular chain from alkaline/urea aqueous solution. The regeneration of NCM from chitosan was proved to be physical process. The morphology of NCM could be precisely controlled by adjusting the initial solution concentration and the reaction temperature. The NCM possessed desirable in vitro/vivo biocompatibility and biodegradability. The excellent cell adhesion capability of NCM facilitated the formation of large-sized 3D geometric constructs in vitro. The NCM promoted in vitro osteogenic differentiation of rat bone marrow stem cells (rMSCs). Finally, pre-differentiated rMSCs-NCM constructs obviously enhanced in vivo bone healing of rat calvarial defects. This work opened up a new avenue for the construction of chitosan microspheres with ECM-like nanofibrous structure, indicated the great potential of the NCM as micro-Noah's Ark for stem cells to anchor, proliferate, and pre-differentiate for tissue engineering.

Chitosan-Based Biomaterials for Bone Tissue Engineering Applications: A Short Review

Natural bone tissue is composed of calcium-deficient carbonated hydroxyapatite as the inorganic phase and collagen type I as the main organic phase. The biomimetic approach of scaffold development for bone tissue engineering application is focused on mimicking complex bone characteristics. Calcium phosphates are used in numerous studies as bioactive phases to mimic natural bone mineral. In order to mimic the organic phase, synthetic (e.g., poly(ε-caprolactone), polylactic acid, poly(lactide-co-glycolide acid)) and natural (e.g., alginate, chitosan, collagen, gelatin, silk) biodegradable polymers are used. However, as materials obtained from natural sources are accepted better by the human organism, natural polymers have attracted increasing attention. Over the last three decades, chitosan was extensively studied as a natural polymer suitable for biomimetic scaffold development for bone tissue engineering applications. Different types of chitosan-based biomaterials (e.g., molded macroporous, fiber-based, hydrogel, microspheres and 3D-printed) with specific properties for different regenerative applications were developed due to chitosan's unique properties. This review summarizes the state-of-the-art of biomaterials for bone regeneration and relevant studies on chitosan-based materials and composites.

Effects of pre-osteogenic differentiation on the bone regeneration potentiality of marrow mesenchymal stem cells/poly(ethylene glycol)-diacrylate hydrogel using a rat cranial defect model

Transplanting cell/hydrogel constructs into a bone defect site is an effective strategy to repair the damaged tissues. However, before transplantation, there are various methods to culture cell/hydrogel constructs. Especially, the preferred pre-osteogenic differentiation period to achieve satisfied bone regeneration should be determined. To this end, Bone marrow mesenchymal stem cells (BMSCs) were firstly photo-encapsulated into poly(ethylene glycol)-diacrylate (PEGDA) hydrogel. Then the constructs were implanted in rat calvarial defects after being osteogenically induced for 0, 7, 14, and 21 days. In vitro experiments demonstrated that the proliferation of BMSCs in the hydrogels deceased significantly from 0 day to 7 days. The activity and the gene expression of alkaline phosphatase, besides the gene expression of bone morphogenetic protein-2 peaked at day 14, whereas the gene expression of osteocalcin and the formation of calcium nodules increased with the prolongation of differentiation time. In vivo results showed that limited areas of newly formed bone were found in the day0 and day21 groups. In the day7 group, obvious new bone with bone marrow space was found, while the day14 group nearly achieved complete bone healing. Our data suggested that the period of in vitro pre-osteogenic differentiation played a crucial role for the osteogenesis of BMSCs/PEGDA hydrogels. Furthermore, we found that a pre-differentiation for 14 days is preferable for bone regeneration in the rat cranial defects.

A regulatory mechanism of a stepwise osteogenesis-mimicking decellularized extracellular matrix on the osteogenic differentiation of bone marrow-derived mesenchymal stem cells

A cell-derived decellularized extracellular matrix (dECM) plays a vital role in controlling cell functions because of its similarity to the in vivo microenvironment. In the process of stem cell differentiation, the composition of the dECM is not constant but is dynamically remolded. However, there is little information regarding the dynamic regulation by the dECM of the osteogenic differentiation of stem cells. Herein, four types of stepwise dECMs (0, 7, 14, and 21 d-ECM) were prepared from bone marrow-derived mesenchymal stem cells (BMSCs) undergoing osteogenic differentiation for 0, 7, 14, and 21 days after decellularization. In vitro experiments were designed to study the regulation of BMSC osteogenesis by dECMs. The results showed that all the dECMs could support the activity and proliferation of BMSCs but had different effects on their osteogenic differentiation. The 14d-ECM promoted the osteogenesis of BMSCs significantly compared with the other dECMs. Proteomic analysis demonstrated that the composition of dECMs changed over time. The 14d ECM had higher amounts of collagen type IV alpha 2 chain (COL4A2) than the other dECMs. Furthermore, COL4A2 was obviously enriched in the activated focal adhesion kinase (FAK)/phosphatidylinositol-4,5-bisphosphate 3-kinase (PI3K)/protein kinase B (AKT) signaling pathways. Thus, the 14d-ECM could promote the osteogenic differentiation of BMSCs, which might be related to the high content of COL4A2 in the 14d-ECM by activating the FAK/PI3K/AKT signaling pathways.

Dental Pulp-Derived Stem Cells Are as Effective as Bone Marrow-Derived Mesenchymal Stromal Cells When Implanted into a Murine Critical Bone Defect

Background While bone marrow-derived mesenchymal stromal cells (BM-MSCs) have been used for many years in bone tissue engineering applications, the procedure still has drawbacks such as painful collection methods and damage to the donor site. Dental pulp-derived stem cells (DPSCs) are readily accessible, occur in high amounts and show a high proliferation and differentiation capability. Therefore, DPSCs may be a promising alternative for BM-MSCs to repair bone defects. Objective The aim of this study was to investigate the bone regenerative potential of DPSCs in comparison to BM-MSCs in vitro and in vivo. Methods In vitro investigations included analysis of cell doubling time as well as proliferation and osteogenic differentiation. For the in vivo study 36 male NMRI nude mice were randomized into 3 groups: 1) control (cell-free mineralized collagen matrix (MCM) scaffold), 2) MCM + DPSCs and 3) MCM + BM-MSCs. Critical size 2 mm bone defects were created at the right femur of each mouse and stabilized by an external fixator. After 6 weeks animals were euthanized and microcomputed tomography scans (µCT) and histological analyses were performed. Results In vitro DPSCs showed a 2-fold lower population doubling time and a 9-fold higher increase in proliferation when seeded onto MCM scaffolds as compared to BM-MSCs, but DPSCs showed a significantly lower osteogenic capability than BM-MSCs. In vivo, the healing of the critical bone defect in NMRI nude mice was comparable among all groups. Conclusions Pre-seeding of MCM scaffolds with DPSCs and BM-MSCs did not enhance bone defect healing. </p>.

Synergistic anti-inflammatory and osteogenic n-HA/resveratrol/chitosan composite microspheres for osteoporotic bone regeneration

The development of functional materials for osteoporosis is ultimately required for bone remodeling. However, grafts were accompanied by increasing pro-inflammatory cytokines that impaired bone formation. In this work, nano-hydroxyapatite (n-HA)/resveratrol (Res)/chitosan (CS) composite microspheres were designed to create a beneficial microenvironment and help improve the osteogenesis by local sustained release of Res. Study of in vitro release confirmed the feasibility of n-HA/Res/CS microspheres for controlled Res release. Notably, microspheres had anti-inflammatory activity evidenced by the decreased expression of pro-inflammatory cytokines TNF-α, IL-1β and iNOS in RAW264.7 cells in a dose dependent manner. Further, enhanced adhesion and proliferation of BMSCs seeded onto microspheres demonstrated that composite microspheres were conducive to cell growth. The ability to enhance osteo-differentiation was supported by up-regulation of Runx2, ALP, Col-1 and OCN, and substantial mineralization in osteogenic medium. When implanted into bone defects in the osteoporotic rat femoral condyles, enhanced entochondrostosis and bone regeneration suggested that the n-HA/Res/CS composite microspheres were more favorable for impaired fracture healing. The results indicated that optimized n-HA/Res/CS composite microspheres could serve as promising multifunctional fillers for osteoporotic bone defect/fracture treatment.

•

The microspheres with sustained Res release possessed obvious anti-inflammatory activity.

•

The microspheres were favorable for cell growth and osteo-differentiation.

•

Higher Res-loaded microspheres significantly improved entochondrostosis and bone remodeling.

•

The microspheres are promising bone fillers for the healing of osteoporotic bone defects/fractures.

In vitro and in vivo assessment of glucose cross-linked gelatin/zein nanofibrous scaffolds for cranial bone defects regeneration

The purpose of this study was to evaluate the glucose cross-linked gelatin/zein scaffolds for bone regeneration in vitro and in vivo. The nanofibrous scaffolds exhibited fast mineralization in the concentrated simulated body fluid with the deposited octacalcium phosphate and dicalcium phosphate dehydrate. The nanofibrous scaffolds exhibited no cytotoxic effect on MC3T3e1 cells in a CCK-8 test. Additionally, scanning electron microscope and confocal laser scanning microscopy images revealed that all the scaffolds were biocompatible and showed excellent support for MC3T3e1 cells. In the osteogenesis characterizations, Alizarin Red staining experiments indicated the improved calcium deposits on the cross-linked scaffolds, while the alkaline phosphatase activity showed no difference. Furthermore, the in vivo cranial bone regeneration results suggested that the cross-linked gelatin/zein scaffolds presented a strong positive effect on the cranial bone regeneration with the increased new bone volume and connective tissue formation, but the incorporation of zein in the gelatin scaffolds did not favor the bone regeneration. Moreover, the cross-linked gelatin scaffold retarded the bone resorption as indicated by the higher levels of IFN-γ and lower levels of IL-6, which restricted the differentiation of osteoclasts.

Application of Chitosan in Bone and Dental Engineering

Chitosan is a deacetylated polysaccharide from chitin, the natural biopolymer primarily found in shells of marine crustaceans and fungi cell walls. Upon deacetylation, the protonation of free amino groups of the d-glucosamine residues of chitosan turns it into a polycation, which can easily interact with DNA, proteins, lipids, or negatively charged synthetic polymers. This positive-charged characteristic of chitosan not only increases its solubility, biodegradability, and biocompatibility, but also directly contributes to the muco-adhesion, hemostasis, and antimicrobial properties of chitosan. Combined with its low-cost and economic nature, chitosan has been extensively studied and widely used in biopharmaceutical and biomedical applications for several decades. In this review, we summarize the current chitosan-based applications for bone and dental engineering. Combining chitosan-based scaffolds with other nature or synthetic polymers and biomaterials induces their mechanical properties and bioactivities, as well as promoting osteogenesis. Incorporating the bioactive molecules into these biocomposite scaffolds accelerates new bone regeneration and enhances neovascularization in vivo.