Advanced modification of drug nanocrystals by using novel fabrication and downstream approaches for tailor-made drug delivery

Effect of PVP and HPMC on production of indomethacin amorphous nanoparticles: experiments and molecular dynamics simulations

OBJECTIVE

This study investigated the effect of molecular interactions between drug and polymers on preparation of nanoamorphous indomethacin (IND) through milling of solid dispersions (SDs).

SIGNIFICANCE

The polymer selection (molecular interaction) emerged as a critical factor in the dynamic milling process for achieving nanoamorphous drug.

METHODS

Polyvinylpyrrolidone (PVP) and hydroxypropyl methylcellulose (HPMC) were selected as models. Amorphous dispersions were used to prepare nanoamorphous drugs by applying wet milling. Molecular simulations were employed to elucidate the molecular mechanisms of drug-polymer miscibility, interaction energy, and molecular migration.

RESULTS

Both PVP and HPMC related SDs could be nanosized after milling. The rate of size reduction might be related to the solid state of the dispersions. The combination of amorphous PVP SDs with reduced particle size significantly improved the dissolution rate of IND. However, HPMC-based samples exhibited recrystallization during milling. Molecular simulation indicated that PVP formed strong molecular interaction with the drug to maintain the amorphous form, which contributed to avoid recrystallization induced by the external milling forces. The radial distribution function of hydrated IND/HPMC amorphous cells demonstrated the absence of hydrogen bonding interactions between IND and HPMC.

CONCLUSION

PVP contributed to maintain the amorphous state during the milling process, which resulted from the higher molecular binding energy compared to HPMC. Controlled milling of amorphous SD with optimized polymer selection could simultaneously achieve nanoamorphous particle and enhanced dissolution rate.

Nanocrystals for Intravenous Drug Delivery: Composition Development, Preparation Methods and Applications in Oncology

Intravenous routes of drug delivery are widely used in clinical practice due to the advantages of fast onset of action and avoidance of first-pass effect. Still, it is difficult to develop poorly water-soluble drugs for intravenous administration. In recent years, the application of nanocrystal technology has become more and more widespread, mainly involving reducing the particle size to the nanoparticle size range and improving its physicochemical properties to enhance the bioavailability of drugs. Intravenous nanocrystals (INCs) can show unique advantages in the vasculature, with their high drug loading capacity, low toxicity, and overcoming low solubility, which makes them a new solution in tumor therapy. In addition, INCs are mainly suspended in aqueous/oil phase media, which makes them easy to inject. Therefore, INCs may serve as a novel strategy to address poor water solubility, low bioavailability, and associated toxicity. This review contains the compositional development of INCs, and preparation methods, and provides some insights into their application in oncology.

Intravenous nanocrystals: fabrication, solidification, in vivo fate, and applications for cancer therapy

INTRODUCTION

Intravenous nanocrystals (INCs) have shown intrinsic advantages in antitumor applications, particularly their properties of high drug loading, low toxicity, and controllable size. Therefore, it has a very bright application prospect as a drug delivery system.

AREAS COVERED

The ideal formulation design principles, fabrication, solidification, in vivo fate of INCs, the applications in drug delivery system (DDS) and the novel applications are covered in this review.

EXPERT OPINION

It is vital to select a suitable formulation and fabrication method to produce a stable and sterile INCs. Besides, the type of stabilizers and physical characteristics can also influence the in vivo fate of INCs, which is worthy of further studying. Based on wide researches about applications of INCs in cancer, biomimetic INCs are concerned increasingly for its favorable compatibility. The output of these studies suggested that INCs-based drug delivery could be a novel strategy for addressing the delivery of the drug that faces solubility, bioavailability, and toxicity problems.

Factors affecting the preparation of nanocrystals: characterization, surface modifications and toxicity aspects

INTRODUCTION

The fabrication of well-defined nanocrystals in size and form is the focus of much investigation. In this work, we have critically reviewed several recent instances from the literature that shows how the production procedure affects the physicochemical properties of the nanocrystals.

AREAS COVERED

Scopus, MedLine, PubMed, Web of Science, and Google Scholar were searched for peer-review articles published in the past few years using different key words. Authors chose relevant publications from their files for this review. This review focuses on the range of techniques available for producing nanocrystals. We draw attention to several recent instances demonstrating the impact of various process and formulation variables that affect the nanocrystals' physicochemical properties. Moreover, various developments in the characterization techniques explored for nanocrystals concerning their size, morphology, etc. have been discussed. Last but not least, recent applications, the effect of surface modifications, and the toxicological traits of nanocrystals have also been reviewed.

EXPERT OPINION

The selection of an appropriate production method for the formation of nanocrystals, together with a deep understanding of the relationship between the drug's physicochemical properties, unique features of the various formulation alternatives, and anticipated in-vivo performance, would significantly reduce the risk of failure during human clinical trials that are inadequate.

Strategizing Spray Drying Process Optimization for the Manufacture of Redispersible Indomethacin Nanoparticles Using Quality-by-Design Principles

The present study adopted a Quality by Design (QbD) approach to spray dry indomethacin nanosuspension (IMC-NS) consisting of HPC-SL, poloxamer 407, and lactose monohydrate. The Box-Behnken Design was used to systematically evaluate the effects of inlet temperature, aspiration rate, and feed rate on the critical quality attributes (CQAs) [redispersibility index (RDI; minimize), % yield (maximize), and % release at 15 min (maximize)] of the indomethacin spray dried nanosuspension (IMC-SD-NS). To identify significant main and quadratic effects, two-way interactions, and create a predictive model for the spray drying process, regression analysis and ANOVA were utilized. Following optimization, the IMC-SD-NS was analyzed for its physicochemical properties using X-ray powder diffraction (XRPD), Fourier transform infrared spectroscopy (FTIR), and in vitro dissolution studies. Statistical analysis revealed significant independent variables, including inlet temperature, feed rate, and aspiration rate, that critically impacted the solidified end product's RDI, % yield, and % release at 15 min. The models developed for critical quality attributes (CQAs) were significant at a p-value of 0.05. The crystalline state of IMC was maintained in the solidified product, as confirmed by XRPD, and no interactions were observed between IMC and the excipients as evaluated by FTIR. In vitro dissolution studies showed improved dissolution rate for the IMC-SD-NS (3.82-fold increase in overall drug release), which may be attributed to the readily redispersible nanosized drug particles. The implementation of a well-designed study, utilizing Design of Experiments (DoE) methodology, played a crucial role in the development of a highly effective spray drying process.

Exploring the translocation behaviours in vivo of herpetrione amorphous nanoparticles via oral delivery

Nanotechnology has been a primary strategy to enhance oral bioavailability of poorly water soluble drugs. However, the limited information in vivo fate of impedes the development of nanoparticles via the oral delivery, especially the amorphous nanoparticles with high energy states are rarely reported. This study is to track the translocation of oral herpetrione amorphous nanoparticles (HPE-ANPs). We prepare amorphous particles (ANPs) of various sizes (200 nm and 450 nm), which are embedded with an aggregation-caused quenching (ACQ) dyes for tracking the intact nanoparticles. Nanoparticles remain in the gastrointestinal tract (GIT) for 8 h following oral administration, suggesting that most ANPs was mainly degraded or absorbed in the small intestine. Ex vivo imaging shows that the fluorescent signals are observed in the GIT and liver but not in other organs, which attributed to low absorption of integral nanoparticles. Besides, HPE-ANPs may be directly interact with GIT epithelia, and ileum provides better absorption than the jejunum. Cellular studies prove that integral HPE-ANPs can be taken up by enterocyte, while it penetrates cell monolayers only small amounts. In conclusion, we speculate that the drug in the form of integral nanoparticles and small molecules may be co-absorbed to improve bioavailability in vivo.

Nanosizing Coamorphous Drugs Using Top-Down Approach: The Effect of Particle Size Reduction on Dissolution Improvement

Nanotechnology and coamorphous are both advanced technologies that can effectively improve the solubility of drugs. This study has been the first attempt to combine these two approaches to construct the coamorphous nanoparticles to improve the dissolution and investigated the effect of physical properties of coamorphous solid on the nanosizing process. Two types of coamorphous solid, i.e., curcumin-artemisinin and quercetin-lysine, were selected as models. Coamorphous curcumin-artemisinin could highly contribute to the size reduction during milling compared to the crystalline form, which might attribute to the change of crystallinity. Nanosized coamorphous curcumin-artemisinin showed higher dissolution than nanocrystals and single coamorphous sample. However, quercetin-lysine coamorphous nanoparticles did not reflect significant dissolution improvement compared with the microsized sample. The difference of initial dissolutions for both could be the main reason. The directly mixing and drying method was confirmed to be an effective and simple approach to maintain the dissolution of nanosized coamorphous sample.

The Therapeutic Potential of Algal Nanoparticles: A Brief Review

Recently, the green synthesis of metallic nanoparticles (NPs) has received tremendous attention as a simple approach. The green pathway of biogenic synthesis of metallic NPs through microbes may provide a sustainable and environmentally friendly protocol. Green technology is the most innovative technology for various biological activities and lacks toxic effects. Reports have shown the algae-mediated synthesis of metal NPs. Algae are widely used for biosynthesis as they grow fast; they produce biomass on average ten times that of plants and are easily utilized experimentally. In the future, the production of metal NPs by different microalgae and their biological activity can be explored in diverse areas such as catalysis, medical diagnosis, and anti-biofilm applications.

A New Gold Nanoparticles and Paclitaxel Co-Delivery System for Enhanced Anti-Cancer Effect Through Chemo-Photothermal Combination

Limited chemotherapeutic efficiency, drug resistance and side effect are primary obstacles for cancer treatment. The development of co-delivery system with synergistic treatment modes should be a promising strategy. Here, we fabricated a multi-functionalized nanocarrier with a combination of chemotherapeutic agent and gold nanoparticles (AuNPs), which could integrate chemo-photothermal therapy and improve entire anti-cancer index. Particularly, Paclitaxel nanocrystals (PTX NC) were first fabricated as a platform, on surface of which AuNPs were decorated and polydopamine (PDA) layer act as capping, stabilizing and hydrophilic agents for PTX NC, providing a bridge connecting AuNPs to PTX. These AuNPs decorated PTX NC exhibited good physico-chemical properties like optimal sizes, stability and photothermal efficiency. Compared to other PTX formulations, they displayed considerably improved biocompatibility, selectivity, intracellular uptake, cytotoxicity, apoptosis induction activity and P-glycoprotein (Pgp) inhibitory capability, owing to a synergistic/ cooperative effect from AuNPs, PTX and NIR treatment, photothermal-triggered drug release and nano-scaled structure. Mitochondria-mediated signaling pathway is underlying mechanism for cytotoxic and apoptotic effect from AuNPs decorated PTX NC, in terms of Mitochondria damage, a loss of Mitochondrial membrane potential, intensified oxidative stress, DNA breakage, Caspase 3 activation, up-regulated expression in pro-apoptotic genes like p53, Caspase 3 and Bax and down-regulated level in anti-apoptotic gene like Bcl-2.

Development of herpetrione nanosuspensions stabilized by glycyrrhizin for enhancing bioavailability and synergistic hepatoprotective effect

The objective of this study was to develop novel herpetrione (HPE) nanosuspensions stabilized by glycyrrhizin (HPE NSs/GL) for enhancing bioavailability and hepatoprotective effect of HPE. HPE NSs/GL were prepared by wet media milling method and then systemically evaluated by particle size analysis, scanning electronic microscopy (SEM), X-ray powder diffraction (XRPD), dissolution test, pharmacokinetics, and hepatoprotective effect. HPE-NSs stabilized by poloxamer 407 (HPE NSs/P407) were also prepared and used as a reference for comparison. HPE NSs/GL and HPE-NSs/P407 with similar particle sizes around 450 nm and PDI less than 0.2 were successfully prepared and both of them appeared to be spherical under SEM. The XRPD results demonstrated that HPE in both HPE NSs/GL and HPE NSs/P407 was presented in the amorphous state and the addition of GL or P407 and the milling process didn't alter the physical state of HPE. The dissolution and pharmacokinetic studies demonstrated that HPE NSs/GL exhibited significant enhancement in drug dissolution (72.44% within 24 h) and AUC_0-t (24.91 ± 3.3 mg/L·h) as compared to HPE coarse suspensions (HPE CS, 34.19% & 13.07 ± 1.02 mg/L·h), but was similar with those of HPE NSs/P407 (80.06% & 26.75 ± 4.06 mg/L•h). Moreover, HPE NSs/GL exhibited significantly better hepatoprotective effect as compared to HPE CS and HPE NSs/P407 as indicated by the lowering of the elevated serum ALT and AST levels and the improvement of the hepatic morphology and architecture, which might be attributed to the improved bioavailability of HPE, and synergistic hepatoprotective effect of GL via alleviating inflammation evidenced by the significant decreased hepatic levels of inflammatory cytokines IL-1β, IL-6 and TNF-α. It could be concluded that GL might be an effective stabilizer for preparing HPE NSs, and HPE NSs/GL is a potential formulation strategy for improving oral bioavailability and hepatoprotective effect of HPE.

Oral delivery of carrier-free dual-drug nanocrystal self-assembled microspheres improved NAD+ bioavailability and attenuated cardiac ischemia/reperfusion injury in mice

Nicotinamide riboside (NR), as a dietary supplement, can be converted to nicotinamide adenine dinucleotide (NAD+) in cells to support mitochondrial energy metabolism. However, the efficacy of oral administrated NR is limited due to its quick degradation in circulation and low bioavailability in targeted organs. In this study, we fabricated nanocrystal self-assembled microspheres by Nano Spray Dryer for oral delivery of NR. The structure of NR and resveratrol (RES) nanocrystal self-assembled microspheres (NR/RESms) is confirmed by the morphology, chemical structure, and crystallization. The NR/RESms displayed restricted NR release at the gastric acid-mimic condition (<15% in the first 8 hours), while achieved accelerated NR release in an enteric-mimic environment (>46% within 8 hours). Oral administration of NR/RESms for 8 hours significantly elevated NAD+ levels in serum (169.88 nM versus 30.93 nM in the NR group, p < .01; and 66.89 nM in the NR + RES group, p < .05), and enhanced NAD+ abundance in multiple organs in mice, exhibiting an improved oral NAD+ bioavailability. In addition, without any serious adverse effects on major organs, oral delivery of NR/RESms attenuated myocardial infarction (15.82% versus 19.38% in the I/R + NR group and 20.76% in the I/R + NR + RES group) in a cardiac ischemia/reperfusion (I/R) injury mouse model. Therefore, our data supported that the NR/RESms is a promising candidate as NAD+ booster for oral administration.

Eplerenone nanocrystals engineered by controlled crystallization for enhanced oral bioavailability

Poor aqueous solubility of eplerenone (EPL) is a major obstacle to achieve sufficient bioavailability after oral administration. In this study, we aimed to develop and evaluate eplerenone nanocrystals (EPL-NCs) for solubility and dissolution enhancement. D-optimal combined mixture process using Design-Expert software was employed to generate different combinations for optimization. EPL-NCs were prepared by a bottom-up, controlled crystallization technique during freeze-drying. The optimized EPL-NCs were evaluated for their size, morphology, thermal behavior, crystalline structure, saturation solubility, dissolution profile, in vivo pharmacokinetics, and acute toxicity. The optimized EPL-NCs showed mean particle size of 46.8 nm. Scanning electron microscopy revealed the formation of elongated parallelepiped shaped NCs. DSC and PXRD analysis confirmed the crystalline structure and the absence of any polymorphic transition in EPL-NCs. Furthermore, EPL-NCs demonstrated a 17-fold prompt increase in the saturation solubility of EPL (8.96 vs. 155.85 µg/mL). The dissolution rate was also significantly higher as indicated by ∼95% dissolution from EPL-NCs in 10 min compared to only 29% from EPL powder. EPL-NCs improved the oral bioavailability as indicated by higher AUC, C_max, and lower T_max than EPL powder. Acute oral toxicity study showed that EPL-NCs do not pose any toxicity concern to the blood and vital organs. Consequently, NCs prepared by controlled crystallization technique present a promising strategy to improve solubility profile, dissolution velocity and bioavailability of poorly water-soluble drugs.

The combination of nanotechnology and traditional Chinese medicine (TCM) inspires the modernization of TCM: review on nanotechnology in TCM-based drug delivery systems

Fast development of combination of nanotechnology with traditional Chinese medicine (TCM) broadens the field of application of TCM. Besides, it increases the research ideas and contributes to TCM modernization. As expected, TCM will be developed into the nanodrug delivery system by nanotechnology with careful design, which will enhance the medicinal value of TCM to cure and prevent disease based on benefits brought by nanometer scale. Here, formulations, relevant preparations methods, and characteristics of nano-TCM were introduced. In addition, the main excellent performances of nano-TCM were clearly elaborated. What is more, the review was intended to address the studies committed to application of nanotechnology in TCM over the years, including development of Chinese medicine active ingredients, complete TCM, and Chinese herbal compounds based on nanotechnology. Finally, this review discussed the safety of nano-TCM and presented future development trends in the way to realize the modernization of TCM. Overall, using the emerging nanotechnology in TCM is promising to promote progress of TCM in international platform. Recent researches on modernization of traditional Chinese medicine (TCM) urged by nanotechnology are introduced, and formulations, advantages, and applications of nano-TCM are reviewed to provide strong proofs.

The contribution of absorption of integral nanocrystals to enhancement of oral bioavailability of quercetin

In this study, self-discriminating hybrid nanocrystals was utilized to explore the biological fate of quercetin hybrid nanocrystals (QT-HNCs) with diameter around 280 nm (QT-HNCs-280) and 550 nm (QT-HNCs-550) following oral and intravenous administration and the contribution of integral nanocrystals to oral bioavailability enhancement of QT was estimated by comparing the absolute exposure of integral QT-HNCs and total QT in the liver. Results showed that QT-HNCs could reside in vivo as intact nanocrystals for as long as 48 h following oral and intravenous administration. A higher accumulation of integral QT-HNCs in liver and lung was observed for both oral and intravenous administration of QT-HNCs. The particle size affects the absorption and biodistribution of integral QT-HNCs and total QT. As compared to QT-HNCs-550, QT-HNCs-280 with smaller particle size is more easily absorbed, but dissolves faster in vivo, leading to higher distribution of QT (146.90 vs. 117.91 h·μg/mL) but lower accumulation of integral nanocrystals (6.8 2e10 vs. 15.27e10 h·[p/s]/[µW/cm²]) in liver following oral administration. Due to its slower dissolution and enhanced recognition by RES, QT-HNCs-550 with larger diameter shows higher liver distribution for both of QT (1015.80 h·μg/mL) and integral nanocrystals (259.63e10 h·[p/s]/[µW/cm²]) than those of QT-HNCs-280 (673.82 & 77.66e10 h·[p/s]/[µW/cm²]) following intravenous administration. The absolute exposure of integral QT-HNCs in liver following oral administration of QT-HNCs are 8.78% for QT-HNCs-280 and 5.88% for QT-HNCs-550, while the absolute exposure of total QT for QT-HNCs-280 and QT-HNCs-550 are 21.80% and 11.61%, respectively. Owing to imprecise quantification method, a surprisingly high contribution of integral QT-HNCs to oral bioavailability enhancement of QT (40.27% for QT-HNCs-280 and 50.65% for QT-HNCs-550) was obtained. These results revealed significant difference in absorption and biodistrbution between integral nanocrystals and overall drugs following oral and intravenous administration of QT-HNCs, and provided a meaningful reference for the contribution of integral nanocrystals to overall bioavailability enhancement.

Nano Co-Crystal Embedded Stimuli-Responsive Hydrogels: A Potential Approach to Treat HIV/AIDS

Currently, the human immunodeficiency virus (HIV) that causes acquired immunodeficiency syndrome (AIDS) can only be treated successfully, using combination antiretroviral (ARV) therapy. Lamivudine (3TC) and zidovudine (AZT), two compounds used for the treatment of HIV and prevention of disease progression to AIDS are used in such combinations. Successful therapy with 3TC and AZT requires frequent dosing that may lead to reduced adherence, resistance and consequently treatment failure. Improved toxicity profiles of 3TC and AZT were observed when combined as a nano co-crystal (NCC). The use of stimuli-responsive delivery systems provides an opportunity to overcome the challenge of frequent dosing, by controlling and/or sustaining delivery of drugs. Preliminary studies undertaken to identify a suitable composition for a stimulus-responsive in situ forming hydrogel carrier for 3TC-AZT NCC were conducted, and the gelation and erosion time were determined. A 25% w/w Pluronic® F-127 thermoresponsive hydrogel was identified as a suitable carrier as it exhibited a gelation time of 5 min and an erosion time of 7 days. NCC-loaded hydrogels were evaluated using in vitro dissolution and cytotoxicity assays. In vitro dissolution undertaken using membrane-less diffusion over 168 h revealed that 3TC and AZT release from NCC-loaded hydrogels was complete and followed zero-order kinetic processes, whereas those loaded with the micro co-crystal and physical mixture were incomplete and best described using the Korsmeyer-Peppas kinetic model. The release of AZT and 3TC from the physical mixture and MCC-loaded gel exhibited a value for n of 0.595 for AZT release from the physical mixture and 0.540 for the MCC technology, whereas the release exponent for 3TC was 0.513 for the physical mixture and 0.557 for the MCC technology indicating that diffusion and erosion controlled 3TC and AZT release. In vitro cytotoxicity assay data revealed that the addition of NCC to the thermoresponsive hydrogel resulted in an improved cell viability of 88.0% ± 5.0% when compared to the cell viability of the NCC of 76.9% ± 5.0%. The results suggest that the use of a thermoresponsive nanosuspension may have the potential to be delivered as an intramuscular injection that can subsequently increase bioavailability and permit dose reduction and/or permit use of a longer dosing frequency.

Addressing the challenges to increase the efficiency of translating nanomedicine formulations to patients

INTRODUCTION

Nanotechnology is in a growth phase for drug delivery and medical imaging. Nanomaterials with unique properties present opportunities for encapsulation of therapeutics and imaging agents, along with conjugation to ligands for targeting. Favorable chemistry of nanomaterials can create formulations that address critical challenges for therapeutics, such as insolubility and a low capacity to cross the blood-brain-barrier (BBB) and intestinal wall.

AREAS COVERED

The authors investigate challenges faced during translation of nanomedicines while suggesting reasons as to why some nanoformulations have under-performed in clinical trials. They assess physiological barriers such as the BBB and gut mucus that nanomedicines must overcome to deliver cargos. They also provide an overview with examples of how nanomedicines can be designed to improve localization and site-specific delivery (e.g., encapsulation, bioconjugation, and triggered-release).

EXPERT OPINION

There are examples where nanomedicines have demonstrated improved efficacy of payload in humans; however, most of the advantages conferred were in improved pharmacokinetics and reduced toxicity. Problematic data show susceptibility of nanoformulations against natural protective mechanisms present in the body, including distribution impediment by physiological barriers and activation of the reticuloendothelial system. Further initiatives should address current challenges while expanding the scope of nanomedicine into advanced biomedical imaging and antibiotic delivery.

Nanocrystals of Novel Valerolactam-Fenbendazole Hybrid with Improved in vitro Dissolution Performance

Valero-fenbendazole (VAL-FBZ) is a novel hybrid compound with in vitro anthelmintic activity, designed and synthesized to address the global problem of resistance to anthelmintic compounds. This new molecule derives from fenbendazole (FBZ), a well-known commercially available benzimidazole used in veterinary medicine despite its poor water solubility. In this work, we report for the first time a strategy to solve the solubility problems of FBZ and VAL-FBZ by means of self-dispersible nanocrystals (SDNC). Nanocrystals were prepared by media milling followed by a spray-drying step, and a comprehensive and exhaustive structural and physicochemical characterization was carried out, in order to understand the systems and their behavior. The formulation poloxamer 188 (P188):FBZ 1:1 turned out with the best process yield (53%) and re-dispersability properties, particle size average of 258 nm, and polydispersity index of 0.2 after redispersion in water. The dissolution profile showed a markedly increased dissolution rate compared with the simple mixture of the components (80% FBZ dissolved in 15 min from the SDNC vs 14% from the control formulation). FTIR spectroscopy, thermal analysis, and X-Ray Powder Diffraction (XRPD) studies showed no chemical interactions between components and an extensive confocal Raman microscopy analysis of the formulations showed very homogeneous spatial distribution of components in the SDNC samples. This manufacturing process was then successfully transferred for preparing and characterizing VAL-FBZ:P188 (1:1) SDNC with similar results, suggesting the promising interest of a novel anthelmintic with improved biopharmaceutical behavior. In conclusion, new FBZ and VAL-FBZ SDNC with improved dissolution rate were successfully prepared and characterized. Graphical abstract.