Nonionic Polymeric Micelles for Oral Gene Delivery In Vivo

Inertial migration of polymer micelles in a square microchannel

Using a hybrid simulation approach that combines a lattice-Boltzmann method for fluid flow and a molecular dynamics model for polymers, we investigate the inertial migration of star-like and crew-cut polymer micelles in a square microchannel. It is found that they exhibit two types of equilibrium positions, which shift further away from the center of the microchannel when the Reynolds number (Re) increases, as can be observed for soft particles. What differs from the behaviors of soft particles is that here, the blockage ratio is no longer the decisive factor. When the sizes are the same, the star-like micelles are always relatively closer to the microchannel wall as they gradually transition from spherical to disc-like with the increase of Re. In comparison, the crew-cut micelles are only transformed into an ellipsoid. Conversely, when the hydrophobic core sizes are the same, the equilibrium position of the star-like micelles becomes closer to that of the crew-cut micelles. Our results demonstrate that for polymer micelles with a core-shell structure, the equilibrium position is no longer solely determined by their overall dimensions but depends on the core and shell's specific dimensions, especially the hydrophobic core size. This finding opens up a new approach for achieving the separation of micelles in inertial migration.

Assessment of the Oral Delivery of a Myelin Basic Protein Gene Promoter with Antiapoptotic bcl-xL (pMBP-bcl-xL) DNA by Cyclic Peptide Nanotubes with Two Aspect Ratios and Its Biodistribution in the Brain and Spinal Cord

Cyclo-(D-Trp-Tyr) peptide nanotubes (PNTs) were reported to be potential carriers for oral gene delivery in our previous study; however, the effect of the aspect ratio (AR) of these PNTs on gene delivery in vivo could affect penetration or interception in biological environments. The aim of this study was to assess the feasibility of cyclo-(D-Trp-Tyr) PNTs with two ARs as carriers for oral pMBP-bcl-x_L-hRluc delivery to the spinal cord to treat spinal cord injury (SCI). We evaluated the biodistribution of oligodendrocyte (OLG)-specific myelin basic protein gene promoter-driven antiapoptotic DNA (pMBP-bcl-x_L) to the brain and spinal cord delivered with cyclo-(D-Trp-Tyr) PNTs with large (L) and small (S) PNTs with two ARs. After complex formation, the length, width, and AR of the L-PNTs/DNA were 77.86 ± 3.30, 6.51 ± 0.28, and 13.75 ± 7.29 μm, respectively, and the length and width of the S-PNTs/DNA were 1.17 ± 0.52 and 0.17 ± 0.05 μm, respectively, giving an AR of 7.12 ± 3.17 as detected by scanning electron microscopy. Each of these three parameters exhibited significant differences (p < 0.05) between L-PNTs/DNA and S-PNTs/DNA. However, there were no significant differences (p > 0.05) between the L-PNTs and S-PNTs for either their DNA encapsulation efficiency (29.72 ± 14.19 and 34.31 ± 16.78%, respectively) or loading efficiency (5.15 ± 2.58 and 5.95 ± 2.91%). The results of the in vitro analysis showed that the S-PNT/DNA complexes had a significantly higher DNA release rate and DNA permeation in the duodenum than the L-PNT/DNA complexes. Using Cy5 and TM-rhodamine to individually and chemically conjugate the PNTs with plasmid DNA, we observed, using laser confocal microscopy, that the PNTs and DNA colocalized in complexes. We further confirmed the complexation between DNA and the PNTs using fluorescence resonance energy transfer (FRET). Data from an in vivo imaging system (IVIS) showed that there was no significant difference (p > 0.05) in PNT distribution between L-PNTs/DNA and S-PNTs/DNA within 4 h. However, the S-PNT/DNA group had a significantly higher DNA distribution (p < 0.05) in several organs, including the ilium, heart, lungs, spleen, kidneys, testes, brain, and spinal cord. Finally, we determined the bcl-x_L protein expression levels in the brain and spinal cord regions for the L-PNT/DNA and S-PNT/DNA complex formulations. These results suggested that either L-PNTs or S-PNTs may be used as potential carriers for oral gene delivery to treat SCI.

Pharmacokinetics of nanotechnology-based formulations in pediatric populations

The development of therapeutics for pediatric use has advanced in the last few decades. However, off-label use of adult medications in pediatrics remains a significant clinical problem. Furthermore, the development of therapeutics for pediatrics is challenged by the lack of pharmacokinetic (PK) data in the pediatric population. To promote the development of therapeutics for pediatrics, the United States Pediatric Formulation Initiative recommended the investigation of nanotechnology-based delivery systems. Therefore, in this review, we provided comprehensive information on the PK of nanotechnology-based formulations from preclinical and clinical studies in pediatrics. Specifically, we discuss the relationship between formulation parameters of nanoformulations and PK of the encapsulated drug in the context of pediatrics. We review nanoformulations that include dendrimers, liposomes, polymeric long-acting injectables (LAIs), nanocrystals, inorganic nanoparticles, polymeric micelles, and protein nanoparticles. In addition, we describe the importance and need of PK modeling and simulation approaches used in predicting PK of nanoformulations for pediatric applications.

Biomolecules Turn Self-Assembling Amphiphilic Block Co-polymer Platforms Into Biomimetic Interfaces

Biological membranes constitute an interface between cells and their surroundings and form distinct compartments within the cell. They also host a variety of biomolecules that carry out vital functions including selective transport, signal transduction and cell-cell communication. Due to the vast complexity and versatility of the different membranes, there is a critical need for simplified and specific model membrane platforms to explore the behaviors of individual biomolecules while preserving their intrinsic function. Information obtained from model membrane platforms should make invaluable contributions to current and emerging technologies in biotechnology, nanotechnology and medicine. Amphiphilic block co-polymers are ideal building blocks to create model membrane platforms with enhanced stability and robustness. They form various supramolecular assemblies, ranging from three-dimensional structures (e.g., micelles, nanoparticles, or vesicles) in aqueous solution to planar polymer membranes on solid supports (e.g., polymer cushioned/tethered membranes,) and membrane-like polymer brushes. Furthermore, polymer micelles and polymersomes can also be immobilized on solid supports to take advantage of a wide range of surface sensitive analytical tools. In this review article, we focus on self-assembled amphiphilic block copolymer platforms that are hosting biomolecules. We present different strategies for harnessing polymer platforms with biomolecules either by integrating proteins or peptides into assemblies or by attaching proteins or DNA to their surface. We will discuss how to obtain synthetic structures on solid supports and their characterization using different surface sensitive analytical tools. Finally, we highlight present and future perspectives of polymer micelles and polymersomes for biomedical applications and those of solid-supported polymer membranes for biosensing.

In vitro and in vivo assessment of delivery of hydrophobic molecules and plasmid DNAs with PEO–PPO–PEO polymeric micelles on cornea

The stability and bio-distribution of genes or drug complexes with poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO–PPO–PEO, Pluronic F-68) polymeric micelles (PM) are essential for an effective nanosized PM delivery system. We used Förster resonance energy transfer (FRET) pairs with PM and measured the FRET ratio to assess the stability of PM in vitro and in vivo on the cornea. The FRET ratio reached a plateau at 0.8 with 3% PM. Differential scanning calorimetry measurement confirmed the complex formation of FRET pairs with PM. Confocal imaging with the fluorophores fluorescein isothiocyanate isomer I (FITC) and rhodamine B base (RhB) also showed the occurrence of FRET pairs in vitro. The fluorophores were mixed with 3% PM solution or the FITC-labeled PEO–PPO–PEO polymers (FITC-P) were mixed with RhB-labeled plasmids (RhB–DNA). In addition, the in vitro corneal permeation of FRET pair complexes with PM reached a 0.8 FRET ratio. One hour after eye drop administration, FRET pairs colocalized in the cytoplasm, and surrounded and entered the nuclei of cells in the cornea, and the polymers were located in the corneal epithelial layers, as detected through anti-PEG immunohistochemistry. Furthermore, fluorescence colocalization in the cytoplasm and cell nucleus of the corneal epithelium was confirmed in tissues where RhB or RhB–DNA complexed with FITC-P was found to accumulate. We demonstrate that at a concentration of 3%, PM can encapsulate FRET pairs or RhB–DNA and retain their integrity within the cornea 1 h after administration, suggesting the feasibility and stability of PEO–PPO–PEO polymers as a vehicle for drug delivery.

Nicotinamide polymeric nanoemulsified systems: a quality-by-design case study for a sustained antimicrobial activity

Nicotinamide, the amide form of vitamin B3, was demonstrated to combat some of the antibiotic-resistant infections that are increasingly common around the world. The objective of this study was to thoroughly understand the formulation and process variabilities affecting the preparation of nicotinamide-loaded polymeric nanoemulsified particles. The quality target product profile and critical quality attributes of the proposed product were presented. Plackett-Burman screening design was employed to screen eight variables for their influences on the formulation's critical characteristics. The formulations were prepared by an oil-in-water emulsification followed by solvent replacement. The prepared systems were characterized by entrapment capacity (EC), entrapment efficiency (EE), particle size, polydispersity index, zeta potential, transmission electron microscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, powder X-ray diffraction, in vitro drug release, and their antibacterial activity against bacterial scrums. EC, EE, particle size, polydispersity index, zeta potential, and percentage release in 24 hours were found to be in the range of 33.5%-68.8%, 53.1%-67.1%, 43.3-243.3 nm, 0.08-0.28, 9.5-53.3 mV, and 5.8%-22.4%, respectively. One-way analysis of variance and Pareto charts revealed that the experimental loadings of 2-hydroxypropyl-β-cyclodextrin and Eudragit(®) S100 were the most significant for their effects on nicotinamide EC and EE. Moreover, the polymeric nanoemulsified particles demonstrated a sustained release profile for nicotinamide. The Fourier transform infrared spectroscopy, differential scanning calorimetry, and X-ray diffraction demonstrated a significant interaction between the drug and 2-hydroxypropyl-β-cyclodextrin that might modulate the sustained release behavior. Furthermore, the formulations provided a sustained antibacterial activity that depended on nicotinamide-loading concentration, release rate, and incubation time. In conclusion, the study demonstrated the potential of polymeric nanoemulsified system to sustain the release and antibacterial activity of nicotinamide.

Formation and degradation of multicomponent multicore micelles: insights from dissipative particle dynamics simulations

Dissipative particle dynamics (DPD) simulation is employed to examine (i) the multicomponent multicore micelle (MMM) formation from two kinds of star-shaped copolymers: A2B4B4 and C2B4B4 where A, B, and C are the segments of the copolymers and (ii) the degradation of multicomponent multicore micelles. Regarding the micelle formation, single-core micelles with the core composed of two components (SCII), multicomponent multicore micelles with each core composed of two components (MMII), multicomponent multicore micelles with each of the cores composed of one component (MMI), and multicomponent multicore rod micelles (MMRI) are considered. By changing the ratio between the number of segments of one of the polymers and the total number of segments of the two copolymers, the number of cores generated and their composition can be controlled. Considering that only C2B4B4 is degraded to 2C1 + 2B4, it was found that SCII, MMII, and MMI micelles degraded to a single irregular network core, to multicores with cores formed of loose aggregates, and to multicore micelles, respectively. The dynamics of micelle formation has several stages (small aggregates (nuclei) → growth of aggregates → micellization) whereas the dynamics of degradation involves the diffusion of the degraded components inside and outside micelles and the rearrangement of the cores of the micelles into new cores.

Poly(alkylene oxide) copolymers for nucleic acid delivery

The advancement of gene-based therapeutics to the clinic is limited by the ability to deliver physiologically relevant doses of nucleic acids to target tissues safely and effectively. Over the last couple of decades, researchers have successfully employed polymer and lipid based nanoassemblies to deliver nucleic acids for the treatment of a variety of diseases. Results of phase I/II clinical studies to evaluate the efficacy and biosafety of these gene delivery vehicles have been encouraging, which has promoted the design of more efficient and biocompatible systems. Research has focused on designing carriers to achieve biocompatibility, stability in the circulatory system, biodistribution to target the disease site, and intracellular delivery, all of which enhance the resulting therapeutic effect. The family of poly(alkylene oxide) (PAO) polymers includes random, block, and branched structures, among which the ABA type triblocks copolymers of ethylene oxide (EO) and propylene oxide (PO) (commercially known as Pluronic) have received the greatest consideration. In this Account, we highlight examples of polycation-PAO conjugates, liposome-PAO formulations, and PAO micelles for nucleic acid delivery. Among the various polymer design considerations, which include molecular weight of polymer, molecular weight of blocks, and length of blocks, the overall hydrophobic-lipophilic balance (HLB) is a critical parameter in defining the behavior of the polymer conjugates for gene delivery. We discuss the effects of varying this parameter in the context of improving gene delivery processes, such as serum stability and association with cell membranes. Other innovative macromolecular modifications discussed in this category include our work to enhance the serum stability and efficiency of lipoplexes using PAO graft copolymers, the development of a PAO gel-based carrier for sustained and stimuli responsive delivery, and the development of biodegradable PAO-based amphiphilic block copolymers.

Oral gene delivery with cyclo-(D-Trp-Tyr) peptide nanotubes

The feasibility of cyclo-(D-Trp-Tyr) peptide nanotubes (PNTs) as oral gene delivery carriers was investigated in nude mice with eight 40 μg doses of pCMV-lacZ in 2 days at 3 h intervals. The association between DNA and PNTs, the DNase I stability of PNTs-associated DNA, and in vitro permeability of DNA were estimated. The results showed that the cyclo-(D-Trp-Tyr) PNTs self-associated at concentrations above 0.01 mg/mL. Plasmid DNA associated with PNTs with a binding constant of 3.2 × 10(8) M(-1) calculated by a fluorescence quenching assay. PNTs were able to protect DNA from DNase I, acid, and bile digestion for 50 min, 60 min, and 180 min, respectively. The in vitro duodenal apparent permeability coefficient of pCMV-lacZ calculated from a steady state flux was increased from 49.2 ± 21.6 × 10(-10) cm/s of naked DNA to 395.6 ± 142.2 × 10(-10) cm/s of pCMV-lacZ/PNT formulation. The permeation of pCMV-lacZ formulated with PNTs was found in an energy-dependent process. Furthermore, β-galatosidase (β-Gal) activity in tissues was quantitatively assessed using chlorophenol red-β-D-galactopyranoside (CPRG) and was significantly increased by 41% in the kidneys at 48 h and by 49, 63, and 46% in the stomach, duodenum, and liver, respectively, at 72 h after the first dose of oral delivery of pCMV-lacZ/PNT formulation. The organs with β-Gal activity were confirmed for the presence of pCMV-lacZ DNA with Southern blotting analysis and intracellular tracing the TM-rhodamine-labeled DNA and the presence of mRNA by reverse transcription-real time quantitative PCR (RT-qPCR). Another plasmid (pCMV-hRluc) encoding Renilla reniformis luciferase was used to confirm the results. An increased hRluc mRNA and luciferase in stomach, duodenum, liver, and kidney were detected by RT-qPCR, ex vivo bioluminescence imaging, luciferase activity quantification, and immunostaining, respectively.

Nanopolymeric micelle effect on the transdermal permeability, the bioavailability and gene expression of plasmid

This study attempts to investigate the transdermal permeability, the bioavailability and gene expression of plasmid formulated with nonionic poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) polymeric micelles (PM). Dynamic light scattering (DLS) and atomic force microscopy (AFM) were used to analyze the PM formulated pCMV-Lac Z (P/PM) containing the gene for β-galactosidase (β-Gal) driven by cytomegalovirus early promoter. Franz diffusion cell was used for in vitro transdermal permeability analysis. Real-time PCR was used to quantify the permeated plasmid in vitro and in vivo. β-Gal activity assay was performed to evaluate transgene expression in vivo. The size of P/PM was ~50 nm with round shape. PM significantly enhanced the in vitro transdermal permeability of plasmid in a direction- and temperature-dependent manner. Following transdermal application of P/PM, higher area under the curve (AUC(P/PM): 98.34 h·ng/mL) and longer half-life of plasmid were detected compared with that of plasmid alone (AUC(P): 10.12 h·ng/mL). Additionally, the β-Gal activity was significantly increased in skin, stomach, brain and spinal cord at both 48 and 72 h after P/PM application and in testis and spleen at 72 h postapplication. In conclusion, PM formulation enhanced the permeation of plasmid through skin into blood circulation, increasing its absorption and the transgene expression in various tissues.

Spectral study of interaction between poly(L-lysine)-poly(ethylene glycol)-poly(L-lysine) and nucleic acids

Polymer-DNA interactions have attracted considerable interests due to their important application in DNA transfection and cellular drug delivery technologies. In this work, a new detection assay for DNA is proposed with a tri-block copolymer poly(L-lysine)-poly(ethylene glycol)-poly(L-lysine) by resonance light scattering technique with the linear ranges from 0.0656 to 6.56 μg ml⁻¹. The detection limit for DNA is 0.42 ng ml⁻¹. Most coexisting substances do not interfere in the detection. UV-spectra and FTIR-spectra were employed to demonstrate the mechanisms of the interaction that the conformation of the DNA changes because the microenvironment of DNA changes.

Intestinal delivery of non-viral gene therapeutics: physiological barriers and preclinical models

The future of nucleic acid-based therapeutics is dependent on achieving successful delivery. Recently, there has been an increasing interest in delivery via the gastrointestinal tract. Gene therapy via this route has many advantages, including non-invasive access and the versatility to treat local diseases, such as inflammatory bowel disease, as well as systemic diseases, such as haemophilia. However, the intestine presents several distinct barriers and, therefore, the design of robust non-viral delivery systems is key to future success. Several non-viral delivery strategies have provided evidence of activity in vivo. To facilitate the design of more efficient and safe gene medicines, more physiologically relevant models, at both the in vitro and in vivo levels, are essential.

Oral gene therapy for hypoparathyroidism: a rat model

The use of nonionic polymeric micelles orally to protect and deliver plasmid DNA in vivo was investigated. Parathyroid hormone (PTH)(1-34) gene (179 bp) was inserted into a human cytomegalovirus promoter (PCMV) and E. coli competent cells were used to amplify the cDNA. Polymeric micelle formations (100 microl) formed from PCMV-PTH(1-34) cDNA (7.2 microg/microl) and 6% (w/v) polyethylene oxide-polypropylene oxide-polyethylene oxide (PEO-PPO-PEO) was administered at 8-hr intervals for 48 hr and then at 8-hr intervals for 24 hr weekly for 3 weeks. Parathyroidectomized rats receiving 150 microl of EDTA (10 mM) before each dose of formation served as the study group; rats receiving drinking water, EDTA (10 mM), PCMV-PTH(1-34) cDNA and PCMV-PTH(1-34) cDNA plus EDTA at the same amount and time intervals served as the control groups. Serum levels of calcium and PTH(1-34) were measured weekly for 4 weeks. Immunohistochemical stain for PTH(1-34), reverse transcriptase polymerase chain reaction for PTH(1-34) mRNA and the relative density of PTH(1-34) mRNA were performed at 2 and 4 weeks after oral gene therapy in different organs. One third to three of five rats in the control groups died after parathyroidectomy. Serum levels of calcium and PTH(1-34) were higher in the study than in the control groups. In the study group, positive stain of PTH(1-34) and PTH(1-34) mRNA could be found in those organs. Relative densities of PTH(1-34) mRNA were higher in the study than in the drinking water group in different organs. Oral gene therapy can maintain calcium and PTH(1-34) levels in parathyroidectomized rats.

Disposition of drugs in block copolymer micelle delivery systems: from discovery to recovery

Since their discovery in the early 1980s, polymeric micelles have been the subject of several studies as delivery systems that can potentially improve the therapeutic performance and modify the toxicity profile of encapsulated drugs by changing their pharmacokinetic characteristics. The efforts in this area have led in recent years to the advancement of several polymeric micellar formulations to clinical trials, some of which have shown promise in changing the biodistribution of the incorporated drug after intravenous administration as a means of tumour-targeted drug delivery. Recently, the possible benefit of polymeric micellar delivery in enhancing the absorption and bioavailability of incorporated drugs from alternative routes of drug administration has attracted interest. This article provides an overview of the effect of polymeric micellar delivery on absorption, distribution, metabolism and excretion of incorporated therapeutic agents. It also aims to assess the current information on the performance of polymeric micellar delivery systems in modifying the pharmacokinetics/pharmacodynamics of the incorporated drugs in clinical trials, and to re-examine the important structural factors required for successful design of polymeric micellar delivery systems capable of inducing favourable changes in the pharmacokinetics of the encapsulated drug.

Block copolymer micelles as delivery vehicles of hydrophobic drugs: Micelle–cell interactions

One-third of drugs in development are water insoluble and one-half fail in trials because of poor pharmacokinetics. Block copolymer micelles are nanosized particles that can solubilize hydrophobic drugs and alter their kinetics in vitro and in vivo. However, block copolymer micelles are not solely passive drug containers that simply solubilize hydrophobic drugs; cells internalize micelles. To facilitate the development of advanced, controlled, micellar drug delivery vehicles, we have to understand the fate of micelles and micelle-incorporated drugs in cells and in vivo. With micelle-based drug formulations recently reaching clinical trials, the impetus for answers is ever so strong and detailed studies of interactions of micelles and cells are starting to emerge. Most notably, the question arises: Is the internalization of block copolymer micelles carrying small molecular weight drugs an undesired side effect or a useful means of improving the effectiveness of the incorporated drugs?

Eye drop delivery of nano-polymeric micelle formulated genes with cornea-specific promoters

BACKGROUND

This study evaluates the eye drop delivery of genes with cornea-specific promoters, i.e., keratin 12 (K12) and keratocan (Kera3.2) promoters, by non-ionic poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) polymeric micelles (PM) to mouse and rabbit eyes, and investigates the underlying mechanisms.

METHODS

Three PM-formulated plasmids (pCMV-Lac Z, pK12-Lac Z and pKera3.2-Lac Z) containing the Lac Z gene for beta-galactosidase (beta-Gal) whose expression was driven by the promoter of either the cytomegalovirus early gene, the keratin 12 gene or the keratocan gene, were characterized by critical micelle concentration (CMC), dynamic light scattering (DLS), and atomic force microscopy (AFM). Transgene expression in ocular tissue after gene delivery was analyzed by 5-bromo-4-chloro-3-indolyl-beta-D-galactoside (X-Gal) color staining, 1,2-dioxetane beta-Gal enzymatic activity measurement, and real-time polymerase chain reaction (PCR) analysis. The delivery mechanisms of plasmid-PM on mouse and rabbit corneas were evaluated by EDTA and RGD (arginine-glycine-aspartic acid) peptide.

RESULTS

The sizes of the three plasmid-PM complexes were around 150-200 nm with unimodal distribution. Enhanced stability was found for three plasmid-PM formulations after DNase I treatment. After six doses of eye drop delivery of pK12-Lac Z-PM three times a day, beta-Gal activity was significantly increased in both mouse and rabbit corneas. Stroma-specific Lac Z expression was only found in pKera3.2-Lac Z-PM-treated animals with pretreatment by 5 mM EDTA, an opener of junctions. Lac Z gene expression in both pK12-Lac Z-PM and pKera3.2-Lac Z-PM delivery groups was decreased by RGD peptide pretreatment.

CONCLUSIONS

Cornea epithelium- and stroma-specific gene expression could be achieved using cornea-specific promoters of keratin 12 and keratocan genes, and the gene was delivered with PM formulation through non-invasive, eye drop in mice and rabbits. The transfection mechanism of plasmid-PM may involve endocytosis and particle size dependent paracellular transport.

Bioavailability effect of methylprednisolone by polymeric micelles

PURPOSE

To investigate the effect of PEO-PPO-PEO polymeric micelles (PM) formulation on the bioavailability of methylprednisolone (MP), a treatment of spinal cord injury (SCI), to the blood and spinal cord (SC) of rabbits.

METHODS

The characteristic of MP formulated with PM (MP/PM) was evaluated by critical micelles concentration (CMC), dynamic light scattering (DLS), atomic force microscopy (AFM) and in vitro kinetic release measurements. HPLC was used to analyze the MP disposition in plasma and SC of rabbits receiving single dose intravenous administration. After MP/PM delivery, the mRNA and protein levels of anti-apoptotic marker, Bcl-x(L), were monitored by Reverse Transcription -Real-Time -Polymerase Chain Reaction (RT-qPCR) and Western blotting analysis, respectively.

RESULTS

At a concentration of 0.1% and at 25 degrees C, PEO-PPO-PEO copolymers formed micelles shown by fluorescence probe, DLS and solubility test. The size of the MP/PM was in an average of 60 nm with a single, rounded shape detected under AFM. Being formulated with 6% PM, MP had higher solubility (219.6 +/- 3.6 microg/ml) and release rate (11.1 +/- 0.4 ng min(1/2)) at 37 degrees C. After intravenously administrated with single dose of 1 mg/kg of MP/PM to rabbits, higher levels of MP in plasma and SC were detected compared to animals receiving an equal dose of MP, analyzed by HPLC. PM formulation markedly increased (7-fold) the plasma half-lives (t (1/2)) of MP (from 76.1 +/- 8.0 to 514.3 +/- 70.0 min). In addition, the SC t (1/2) of MP/PM also increased from 278 to 528 min. In SC, the mRNA level of Bcl-x(L) increased 4-fold in animals receiving MP/PM compared to that with MP alone at 7 h post-administration. Similar elevated Bcl-x(L) protein was also detected upon MP/PM administration compared to MP.

CONCLUSIONS

PM vehicle was able to deliver MP to improve its pharmacokinetic profile in plasma and SC with higher expression of anti-apoptotic Bcl-x(L) at both mRNA and protein levels.

An overview of condensing and noncondensing polymeric systems for gene delivery

INTRODUCTIONSelf-assembling synthetic vectors for DNA delivery are designed to fulfill several biological functions. They must be able to deliver their genetic payload specifically to the target tissue/cells in a site-specific manner, while protecting the genetic material from degradation by metabolic or immune pathways. Furthermore, they must exhibit minimal toxicity and be proven safe enough for therapeutic use. Ultimately, they must have the capability to express a therapeutic gene for a finite period of time in an appropriate, regulated fashion. The DNA encapsulated in these vectors may be in a condensed or noncondensed form, depending on the nature of the polymer and the technique used for formulating the vector system. The whole process presents many barriers at both tissue and cellular levels. Overcoming these hurdles is the principal objective for efficient polymer-based DNA therapeutics.

Ethanol enhanced in vivo gene delivery with non-ionic polymeric micelles inhalation

Modifications of both carriers and host barriers have been investigated for efficient inhalation gene delivery to lung. Here we used a biocompatible, non-ionic poly(ethyleneoxide)-poly(propyleneoxide)-poly(ethyleneoxide) (PEO-PPO-PEO) polymeric micelles (PM) as a carrier and combined it with ethanol to enhance membrane penetration of delivered DNA. The inhalation delivery with six 100 microg doses of pCMV-Lac Z with PM co-formulated with 10%-40% ethanol to nude mice in 2 days at 8 h interval was performed. The beta-galatosidase (beta-Gal) activity was assessed using chlorophenol red-beta-d galactopyranoside (CPRG) and X-gal staining for quantitative and qualitative analysis in tissues. The results showed that beta-Gal activity was significantly increased by 38% in lung around bronchioles when inhalation with PM and 10% ethanol was given. The 10% ethanol also increased the intracellular apparent permeability by 42% in stomach and by 141% in intestine at 48 h after the first dosage of delivery. Also delivery of DNA encoding a functional human cystic fibrosis transmembrane protein (CFTR) using the same inhalation delivery method co-formulated with 10% ethanol, an increased expression of CFTR in lung was detected by immunostaining. We concluded that 10% ethanol co-formulated with the PM system could enhance inhaled gene delivery to airway and gastrointestinal (GI) tract.

Coxsackie adenovirus receptor and alpha nu beta3/alpha nu beta5 integrins in adenovirus gene transfer of rat cochlea

This study was designed to determine whether Coxsackie adenovirus receptor (CAR) and alpha nu beta3/alpha nu beta5 integrin co-receptors are involved in adenovirus gene transfer in the rat cochlea. We find that CAR and integrin co-receptors are expressed in every cell subtype transduced by the adenoviral vector Ad5 DeltaE1-E3/cytomegalovirus/green fluorescent protein (GFP) on cochlear slices in vitro. The spiral ganglion neurons, which do not express CAR, were not transduced by the virus. Blocking these receptors by monoclonal antibodies decreased transgene expression, whereas disrupting tight junctions with ethylenediaminetetraacetic acid led to an increased transgene expression. However, sensory hair cells and strial cells also expressing CAR and alpha nu integrins were not transduced by the vector. GFP expression was also studied in vivo. Perilymphatic perfusion of adenovirus in vivo did not affect hearing and only cells lining the perilymphatic spaces were transduced. Endolymphatic perfusion resulted in low-frequency hearing loss and although some cells of the organ of Corti were efficiently transduced, the sensory and the strial cells were not. Transduced sensory and strial cells were occasionally observed in cochleas after single shot of adenovirus. Pretreatment with anti-CAR and anti-alpha nu antibodies decreases GFP expression in vivo, suggesting that the CAR/alpha nu integrin pathway is involved in adenovirus transduction in the cochlea.