Comparison of ectopic bone formation of embryonic stem cells and cord blood stem cells in vivo

Chondrogenic and BMP-4 primings confer osteogenesis potential to human cord blood mesenchymal stromal cells delivered with biphasic calcium phosphate ceramics

Bone marrow mesenchymal stem/stromal cells (BMSCs) show great promise for bone repair, however they are isolated by an invasive bone marrow harvest and their regenerative potential decreases with age. Conversely, cord blood can be collected non-invasively after birth and contains MSCs (CBMSCs) that can be stored for future use. However, whether CBMSCs can replace BMSCs targeting bone repair is unknown. This study evaluates the in vitro osteogenic potential of unprimed, osteogenically primed, or chondrogenically primed CBMSCs and BMSCs and their in vivo bone forming capacity following ectopic implantation on biphasic calcium phosphate ceramics in nude mice. In vitro, alkaline phosphatase (intracellular, extracellular, and gene expression), and secretion of osteogenic cytokines (osteoprotegerin and osteocalcin) was significantly higher in BMSCs compared with CBMSCs, while CBMSCs demonstrated superior chondrogenic differentiation and secretion of interleukins IL-6 and IL-8. BMSCs yielded significantly more cell engraftment and ectopic bone formation compared to CBMSCs. However, priming of CBMSCs with either chondrogenic or BMP-4 supplements led to bone formation by CBMSCs. This study is the first direct quantification of the bone forming abilities of BMSCs and CBMSCs in vivo and, while revealing the innate superiority of BMSCs for bone repair, it provides avenues to induce osteogenesis by CBMSCs.

Evaluation of Biocompatibility of Different Membrane Surfaces Using Unrestricted Somatic Stem Cells

BACKGROUND/AIM

Results of Guided Bone Regeneration (GBR) primarily depend on the membrane used. The aim of this study was to compare biocompatibility of different absorbable and non-absorbable membranes by using unrestricted somatic stem cells (USSCs) as an indicator for biocompatibility.

MATERIALS AND METHODS

Five absorbable membranes (Bio-Gide®, RESODONT®, GENTA-FOIL resorb®, BioMend® and BioMend® Extend™) and one non-absorbable alternative (GORE-TEX®) were colonized with USSCs. After 24 h, 3 days and 7 days, cell proliferation, cell viability, and cytotoxicity were assessed. Moreover, cell morphology was evaluated by electron microscopy.

RESULTS

Significantly higher cell proliferation and cell viability rates were observed in Bio-Gide® and RESODONT® membranes. Cell toxicity was highest on GENTA-FOIL resorb® membranes. The electron microscopical assessment showed a better cell attachment on porous surfaced membranes.

CONCLUSION

This study shows that USSCs can be used for assessments of biocompatibility, and that absorbable membranes with collagenous composition and porous structure tend to positively impact biocompatibility and enhance cell proliferation.

Lentiviral Gene Therapy for Bone Repair Using Human Umbilical Cord Blood-Derived Mesenchymal Stem Cells

Umbilical cord blood (UCB) has been increasingly explored as an alternative source of stem cells for use in regenerative medicine due to several advantages over other stem-cell sources, including the need for less stringent human leukocyte antigen matching. Combined with an osteoinductive signal, UCB-derived mesenchymal stem cells (MSCs) could revolutionize the treatment of challenging bone defects. This study aimed to develop an ex vivo regional gene-therapy strategy using BMP-2-transduced allogeneic UCB-MSCs to promote bone repair. To this end, human UCB-MSCs were transduced with a lentiviral vector carrying the cDNA for BMP-2 (LV-BMP-2). In vitro assays to determine the UCB-MSC osteogenic potential and BMP-2 production were followed by in vivo implantation of LV-BMP-2-transduced UCB-MSCs in a mouse hind-limb muscle pouch. Non-transduced and LV-GFP-transduced UCB-MSCs were used as controls. Transduction with LV-BMP-2 was associated with abundant BMP-2 production and induction of osteogenic differentiation in vitro. Implantation of BMP-2-transduced UCB-MSCs led to robust heterotopic bone formation 4 weeks postoperatively, as seen on radiographs and histology. These results, along with the fact that UCB-MSCs can be easily collected with no donor-site morbidity and low immunogenicity, suggest that UCB might be a preferable allogeneic source of MSCs to develop an ex vivo gene-therapy approach to treat difficult bone-repair scenarios.

Human Umbilical Cord Blood Cell Transplantation in Neuroregenerative Strategies

At present there is no effective treatment of pathologies associated with the death of neurons and glial cells which take place as a result of physical trauma or ischemic lesions of the nervous system. Thus, researchers have high hopes for a treatment based on the use of stem cells (SC), which are potentially able to replace dead cells and synthesize neurotrophic factors and other molecules that stimulate neuroregeneration. We are often faced with ethical issues when selecting a source of SC. In addition to precluding these, human umbilical cord blood (hUCB) presents a number of advantages when compared with other sources of SC. In this review, we consider the key characteristics of hUCB, the results of various studies focused on the treatment of neurodegenerative diseases (Alzheimer's disease, Parkinson's disease, amyotrophic lateral sclerosis), ischemic (stroke) and traumatic injuries of the nervous system and the molecular mechanisms of hUCB-derived mononuclear and stem cells.

Low oxygen tension reveals distinct HOX codes in human cord blood-derived stromal cells associated with specific endochondral ossification capacities in vitro and in vivo

Effects of oxygen tension on the generation, expansion, proliferation and differentiation of stromal cell types is widely described in the literature. However, data on the internal heterogeneity of applied cell populations at different O₂ levels and possible impacts on differentiation potentials are controversial. Here, the expression of 39 human HOX genes was determined in neonatal cord blood stromal cells and linked to differentiation-associated signatures. In cord blood, unrestricted somatic stromal cells (USSCs), lacking HOX gene expression, and cord blood-derived multipotent stromal cells (CB-MSCs), expressing about 20 HOX genes, are distinguished by their specific HOX code. Interestingly, 74% of the clones generated at 21% O₂ were HOX-negative USSCs, whereas 73% of upcoming clones at 3% O₂ were HOX-positive CB-MSCs. In order to better categorize distinct cell lines generated at 3% O₂ , the expression of all 39 HOX genes within HOX clusters A, B, C and D were tested and new subtypes defined: cells negative in all four HOX clusters (USSCs); cells positive in all four clusters (CB-MSCs^ABCD ); and subpopulations missing a single cluster (CB-MSCs^ACD and CB-MSCs^BCD ). Comprehensive qPCR analyses of established chondro-osteomarkers revealed subtype-specific signatures verifiably associated with in vitro and in vivo differentiation capacity. The data presented here underline the necessity of better characterizing distinct cell populations at a clonal level, taking advantage of the inherent specific HOX code as a distinguishing feature between individual subtypes. Moreover, the correlation of subtype-specific molecular signatures with in vitro and in vivo bone formation is discussed. Copyright © 2016 John Wiley & Sons, Ltd.

Bone and cartilage regeneration with the use of umbilical cord mesenchymal stem cells

INTRODUCTION

The production of functional alternatives to bone autografts and the development new treatment strategies for cartilage defects are great challenges that could be addressed by the field of tissue engineering. Umbilical cord mesenchymal stem cells (MSCs) can be used to produce cost-effective, atraumatic and possibly autologous bone and cartilage grafts.

AREAS COVERED

MSCs can be isolated from umbilical cord Wharton's jelly, perivascular tissue and blood using various techniques. Those cells have been characterized and phenotypic similarities with bone marrow-derived MSCs (BM-MSCs) and embryonic stem cells have been found. Findings on their differentiation into the osteogenic and chondrogenic lineage differ between studies and are not as consistent as for BM-MSCs.

EXPERT OPINION

MSCs from umbilical cords have to be more extensively studied and the mechanisms underlying their differentiation have to be clarified. To date, they seem to be an attractive alternative to BM-MSCs. However, further research with suitable scaffolds and growth factors as well as with novel scaffold fabrication and culture technology should be conducted before they are introduced to clinical practice and replace BM-MSCs.

Osteogenic potential of mesenchymal cells derived from canine umbilical cord matrix co-cultured with platelet-rich plasma and demineralized bone matrix

Canine mesenchymal cells (MSCs) derived from Wharton's jelly were co-cultured, then supplemented or not supplemented with platelet rich plasma (PRP) and demineralized bone matrix (DBM) to verify osteogenic differentiation. Osteoblastic differentiation followed by mineralized bone matrix production was found to be significantly higher (p < 0.05) when MSCs were associated with PRP/DBM in culture after 14-21-days of induction. Osteopontin and osteocalcin gene expression were significantly superior (p < 0.05) under the same culture conditions after 21 days of observation. In conclusion, addition of PRP to DBM co-cultured with MSCs successfully induced osteogenesis in vitro.

A facile in vitro model to study rapid mineralization in bone tissues

Background

Mineralization in bone tissue involves stepwise cell-cell and cell-ECM interaction. Regulation of osteoblast culture microenvironments can tailor osteoblast proliferation and mineralization rate, and the quality and/or quantity of the final calcified tissue. An in vitro model to investigate the influencing factors is highly required.

Methods

We developed a facile in vitro model in which an osteoblast cell line and aggregate culture (through the modification of culture well surfaces) were used to mimic intramembranous bone mineralization. The effect of culture environments including culture duration (up to 72 hours for rapid mineralization study) and aggregates size (monolayer culture as control) on mineralization rate and mineral quantity/quality were examined by osteogenic gene expression (PCR) and mineral markers (histological staining, SEM-EDX and micro-CT).

Results

Two size aggregates (on average, large aggregates were 745 μm and small 79 μm) were obtained by the facile technique with high yield. Cells in aggregate culture generated visible and quantifiable mineralized matrix within 24 hours, whereas cells in monolayer failed to do so by 72 hours. The gene expression of important ECM molecules for bone formation including collagen type I, alkaline phosphatase, osteopontin and osteocalcin, varied temporally, differed between monolayer and aggregate cultures, and depended on aggregate size. Monolayer specimens stayed in a proliferation phase for the first 24 hours, and remained in matrix synthesis up to 72 hours; whereas the small aggregates were in the maturation phase for the first 24 and 48 hour cultures and then jumped to a mineralization phase at 72 hours. Large aggregates were in a mineralization phase at all these three time points and produced 36% larger bone nodules with a higher calcium content than those in the small aggregates after just 72 hours in culture.

Conclusions

This study confirms that aggregate culture is sufficient to induce rapid mineralization and that aggregate size determines the mineralization rate. Mineral content depended on aggregate size and culture duration. Thus, our culture system may provide a good model to study regulation factors at different development phases of the osteoblastic lineage.

Electronic supplementary material

The online version of this article (doi:10.1186/1475-925X-13-136) contains supplementary material, which is available to authorized users.

Effects of dexamethasone, ascorbic acid and β-glycerophosphate on the osteogenic differentiation of stem cells in vitro

The standard procedure for the osteogenic differentiation of multipotent stem cells is treatment of a confluent monolayer with a cocktail of dexamethasone (Dex), ascorbic acid (Asc) and β-glycerophosphate (β-Gly). This review describes the effects of these substances on intracellular signaling cascades that lead to osteogenic differentiation of bone marrow stroma-derived stem cells. We conclude that Dex induces Runx2 expression by FHL2/β-catenin-mediated transcriptional activation and that Dex enhances Runx2 activity by upregulation of TAZ and MKP1. Asc leads to the increased secretion of collagen type I (Col1), which in turn leads to increased Col1/α2β1 integrin-mediated intracellular signaling. The phosphate from β-Gly serves as a source for the phosphate in hydroxylapatite and in addition influences intracellular signaling molecules. In this context we give special attention to the differences between dystrophic and bone-specific mineralization.

New strategies in cord blood cells transplantation

For patients lacking a human leucocyte antigen-matched donor, umbilical cord blood (UCB) is an ideal, alternative source of haematopoietic stem cells (HSCs) for transplantation purposes. UCB has many advantages over bone marrow or peripheral blood taken from volunteer donors. UCB is also an important source of other stem cells, including endothelial progenitors, mesenchymal stem cells, very small embryonic/epiblast-like (VSEL) stem cells, and unrestricted somatic stem cells, which are potentially suitable for regenerative medicine. However, a significant clinical problem is that the number of HSCs in one cord-blood unit is not enough for an adult transplantation. The development of new approaches including use of multiple donors, ex vivo expansion, increasing efficiency of homing and engraftment, retrieving more cells from the placenta and cord blood is of crucial importance for the delayed engraftment after UCB transplantation. In the future, UCB will emerge as a source of cells for cellular therapies associated with tissue repair and regeneration.

Scaffold-free microtissues: differences from monolayer cultures and their potential in bone tissue engineering

OBJECTIVES

Cell-based therapies for bone augmentation after tooth loss and for the treatment of periodontal defects improve healing defects. Usually, osteogenic cells or stem cells are cultivated in 2D primary cultures, before they are combined with scaffold materials, even though this means a loss of the endogenous 3D microenvironment for the cells. Moreover, the use of single-cell suspensions for the inoculation of scaffolds or for the direct application into an area of interest has the disadvantages of low initial cell numbers and susceptibility to unwanted cellular distribution, respectively.

MATERIALS AND METHODS

We addressed the question whether an alternative to monolayer cultures, namely 3D microtissues, has the potential to improve osteogenic tissue engineering and its clinical outcome.

RESULTS

By contrast, to monolayer cultures, osteogenic differentiation of 3D microtissues is enhanced by mimicking in vivo conditions. It seems that the osteogenic differentiation in microtissues is enhanced by strong integrin-extracellular matrix interaction and by stronger autocrine BMP2 signaling. Moreover, microtissues are less prone to wash out by body fluids and allow the precise administration of large cell numbers.

CONCLUSION

Microtissue cultures have closer characteristics with cells in vivo and their enhanced osteogenic differentiation makes scaffold-free microtissues a promising concept in osteogenic tissue engineering.

CLINICAL RELEVANCE

Microtissues are particularly suitable for tissue engineering because they improve seeding efficiency of biomaterials by increasing the cell load of a scaffold. This results in accelerated osteogenic tissue formation and could contribute to earlier implant stability in mandibular bone augmentation.

Potential application of cord blood-derived stromal cells in cellular therapy and regenerative medicine

Neonatal stromal cells from umbilical cord blood (CB) are promising alternatives to bone marrow- (BM-) derived multipotent stromal cells (MSCs). In comparison to BM-MSC, the less mature CB-derived stromal cells have been described as a cell population with higher differentiation and proliferation potential that might be of potential interest for clinical application in regenerative medicine. Recently, it has become clear that cord blood contains different stromal cell populations, and as of today, a clear distinction between unrestricted somatic stromal cells (USSCs) and CB-MSC has been established. This classification is based on the expression of DLK-1, HOX, and CD146, as well as functional examination of the adipogenic differentiation potential and the capacity to support haematopoiesis in vitro and in vivo. However, a marker enabling a prospective isolation of the rare cell populations directly out of cord blood is yet to be found. Further analysis may help to reveal even more subpopulations with different properties, which could be useful for the directed application of these cells in preclinical models.

Nanofiber-based delivery of bioactive agents and stem cells to bone sites

Biodegradable nanofibers are important scaffolding materials for bone regeneration. In this paper, the basic concepts and recent advances of self-assembly, electrospinning and thermally induced phase separation techniques that are widely used to generate nanofibrous scaffolds are reviewed. In addition, surface functionalization and bioactive factor delivery within these nanofibrous scaffolds to enhance bone regeneration are also discussed. Moreover, recent progresses in applying these nanofiber-based scaffolds to deliver stem cells for bone regeneration are presented. Along with the significant advances, challenges and obstacles in the field as well as the future perspective are discussed.

Scaffold-free microtissues: differences from monolayer cultures and their potential in bone tissue engineering

Objectives

The paper’s aim is to review dentin hypersensitivity (DHS), discussing pain mechanisms and aetiology.

Materials and methods

Literature was reviewed using search engines with MESH terms, DH pain mechanisms and aetiology (including abrasion, erosion and periodontal disease).

Results

The many hypotheses proposed for DHS attest to our lack of knowledge in understanding neurophysiologic mechanisms, the most widely accepted being the hydrodynamic theory. Dentin tubules must be patent from the oral environment to the pulp. Dentin exposure, usually at the cervical margin, is due to a variety of processes involving gingival recession or loss of enamel, predisposing factors being periodontal disease and treatment, limited alveolar bone, thin biotype, erosion and abrasion.

Conclusions

The current pain mechanism of DHS is thought to be the hydrodynamic theory. The initiation and progression of DHS are influenced by characteristics of the teeth and periodontium as well as the oral environment and external influences. Risk factors are numerous often acting synergistically and always influenced by individual susceptibility.

Clinical relevance

Whilst the pain mechanism of DHS is not well understood, clinicians need to be mindful of the aetiology and risk factors in order to manage patients’ pain and expectations and prevent further dentin exposure with subsequent sensitivity.

Human umbilical cord is a unique and safe source of various types of stem cells suitable for treatment of hematological diseases and for regenerative medicine

Cord blood (CB) is a rich source of hematopoietic stem cells (HSCs) and for this reason CB transplantation has been used successfully for the treatment of some malignant and nonmalignant diseases. However, this technique is limited by the relatively low number of HSCs present in each CB unit and by the delayed engraftment of platelets and neutrophils. To bypass these obstacles efforts have been made to develop strategies to expand CB HSCs in vitro for transplantation. CB is also an important source of other stem cells, including endothelial progenitors, mesenchymal stem cells (MSCs), very small embryonic/epiblast-like (VSEL) stem cells, and unrestricted somatic stem cells (USSC), potentially suitable for use in regenerative medicine. For some of these stem cell populations, such as MSCs, clinical studies have been started and for other stem cell populations potential clinical applications have been identified and clinical studies will follow. In addition to CB, other parts of umbilical cord, such as the Wharton's jelly, or tissues strictly linked such as the placenta are also rich sources of stem cells.

Current trends and future perspectives of bone substitute materials - from space holders to innovative biomaterials

An autologous bone graft is still the ideal material for the repair of craniofacial defects, but its availability is limited and harvesting can be associated with complications. Bone replacement materials as an alternative have a long history of success. With increasing technological advances the spectrum of grafting materials has broadened to allografts, xenografts, and synthetic materials, providing material specific advantages. A large number of bone-graft substitutes are available including allograft bone preparations such as demineralized bone matrix and calcium-based materials. More and more replacement materials consist of one or more components: an osteoconductive matrix, which supports the ingrowth of new bone; and osteoinductive proteins, which sustain mitogenesis of undifferentiated cells; and osteogenic cells (osteoblasts or osteoblast precursors), which are capable of forming bone in the proper environment. All substitutes can either replace autologous bone or expand an existing amount of autologous bone graft. Because an understanding of the properties of each material enables individual treatment concepts this review presents an overview of the principles of bone replacement, the types of graft materials available, and considers future perspectives. Bone substitutes are undergoing a change from a simple replacement material to an individually created composite biomaterial with osteoinductive properties to enable enhanced defect bridging.

Generation and differentiation of microtissues from multipotent precursor cells for use in tissue engineering

This protocol describes an effective method for the production of spherical microtissues (microspheres), which can be used for a variety of tissue-engineering purposes. The obtained microtissues are well suited for the study of osteogenesis in vitro when multipotent stem cells are used. The dimensions of the microspheres can easily be adjusted according to the cell numbers applied in an individual experiment. Thus, microspheres allow for the precise administration of defined cell numbers at well-defined sites. Here we describe a detailed workflow for the production of microspheres using unrestricted somatic stem cells from human umbilical cord blood and adapted protocols for the use of these microspheres in histological analysis. RNA extraction methods for mineralized microtissues are specifically modified for optimum yields. The duration of running the complete protocol without preparatory cell culture but including 2 weeks of microsphere incubation, histological staining and RNA isolation is about 3 weeks.

Impact of DAG stimulation on mineral synthesis, mineral structure and osteogenic differentiation of human cord blood stem cells

It remains unexplored in what way osteogenic stimulation with dexamethasone, ascorbic acid and β-glycerol phosphate (DAG) influences the process of mineralization, the composition and structure of the assembled mineral. Therefore, we analyzed and characterized biomineralization in DAG-stimulated and unstimulated 3D human unrestricted somatic stem cell (USSC) cultures. Microspheres were analyzed by histological staining, scanning electron microscopy (SEM), semi-quantitative energy-dispersive X-ray spectroscopy (EDX), quantitative wavelength-dispersive X-ray spectroscopy (WDX), transmission electron microscopy (TEM), selected area electron diffraction (SAED) and Raman spectroscopy. Mineral material was detected by SEM and histological staining in both groups, and showed structural differences. DAG influenced the differentiation of USSCs and the formation, structure and composition of the assembled mineral. SEM showed that cells of the +DAG spheres exhibited morphological signs of osteoblast-like cells. EDX and WDX confirmed a Ca-P mineral in both groups. Overall, the mineral material found showed structural similarities to the mineral substance of bony material.

Effective combination of aligned nanocomposite nanofibers and human unrestricted somatic stem cells for bone tissue engineering

AIM

Bioartificial bone tissue engineering is an increasingly popular technique to solve bone defect challenges. This study aimed to investigate the interactions between matrix composition and appropriate cell type, focusing on hydroxyapatite (HA), to achieve a more effective combination for bone regeneration.

METHODS

Human unrestricted somatic stem cells (USSCs) were isolated from placental cord blood. The cellular and molecular events during the osteo-induction of USSCs were evaluated for 21 d under the following conditions: (1) in basal culture, (2) supplemented with hydroxyapatite nanoparticle (nHA) suspension, and (3) seeded on electrospun aligned nanofibrous poly-ɛ-caprolactone/poly-L-lactic acid/nHA (PCL/PLLA/nHA) scaffolds. The scaffolds were characterized using scanning electron microscope (SEM), fourier transform infrared spectroscopy (FTIR) and tensile test.

RESULTS

Maintenance of USSCs for 21 d in basal or osteogenic culture resulted in significant increase in osteoblast differentiation. With nHA suspension, even soluble osteo-inductive additives were ineffective, probably due to induced apoptosis of the cells. In contrast to the hindrance of proliferation by nHA suspension, the scaffolds improved cell growth. The scaffolds mimic the nanostructure of natural bone matrix with the combination of PLLA/PCL (organic phase) and HA (inorganic phase) offering a favorable surface topography, which was demonstrated to possess suitable properties for supporting USSCs. Quantitative measurement of osteogenic markers, enzymatic activity and mineralization indicated that the scaffolds did not disturb, but enhanced the osteogenic potential of USSCs. Moreover, the alignment of the fibers led to cell orientation during cell growth.

CONCLUSION

The results demonstrated the synergism of PCL/PLLA/nHA nanofibrous scaffolds and USSCs in the augmentation of osteogenic differentiation. Thus, nHA grafted into PCL/PLLA scaffolds can be a suitable choice for bone tissue regeneration.

Infection, vascularization, remodelling--are stem cells the answers for bone diseases of the jaws?

Osteonecrosis after craniofacial radiation (ORN), osteomyelitis and bisphosphonates related necrosis of the jaw (BRONJ) are the predominant bone diseases in Cranio- and Maxillofacial surgery. Although various hypothesis for the pathophysiological mechanisms including infection, altered vascularisation or remodelling exist, the treatment is still a challenge for clinicians. As the classical pharmacological or surgical treatment protocols have only limited success, stem cells might be a promising treatment option, indicated by recently published data.

A comparison between osteogenic differentiation of human unrestricted somatic stem cells and mesenchymal stem cells from bone marrow and adipose tissue

To evaluate the potential of three stem cells for cell therapy and tissue engineering applications, the biological behavior and osteogenic capacity of the newly introduced cord-blood-derived, unrestricted somatic stem cells (USSC) were compared with those of mesenchymal stem cells isolated from bone marrow (BM-MSC) and adipose tissue (AT-MSC). There was no significant difference between the rates of proliferation of the three stem cells. During osteogenic differentiation, alkaline phosphatase (ALP) activity peaked on day 7 in USSC compared to BM-MSC which showed the maximum value of ALP activity on day 14. However, BM-MSC had the highest ALP activity and mineralization during osteogenic induction. In addition, AT-MSC showed the lowest capacity for mineralization during differentiation and had the lowest ALP activity on days 7 and 14. Although AT-MSC expressed higher levels of collagen type I, osteonectin and BMP-2 in undifferentiated state, but these genes were expressed higher in BM-MSC during differentiation. BM-MSC also expressed higher levels of ALP, osteocalcin and Runx2 during induction. Taking together, BM-MSC showed the highest capacity for osteogenic differentiation and hold promising potential for bone tissue engineering and cell therapy applications.

Enhanced osteogenic differentiation of cord blood-derived unrestricted somatic stem cells on electrospun nanofibers

A new stem cell-scaffold construct based on poly-L-lactide (PLLA) nanofibers grafted with collagen (PLLA-COL) and cord blood-derived unrestricted somatic stem cells (USSC) were proposed to hold promising characteristics for bone tissue engineering. Fabricated nanofibers were characterized using SEM, ATR-FTIR, tensile and contact angle measurements. The capacity of PLLA, plasma-treated PLLA (PLLA-pl) and PLLA-COL scaffolds to support proliferation and osteogenic differentiation of USSC was evaluated using MTT assay and common osteogenic markers such as alkaline phosphatase (ALP) activity, calcium mineral deposition and bone-related genes. All three scaffolds showed nanofibrous and porous structure with suitable physical characteristics. Higher proliferation and viability of USSC was observed on PLLA-COL nanofibers compared to control surfaces. In osteogenic medium, ALP activity and calcium deposition exhibited the highest values on PLLA-COL scaffolds on days 7 and 14. These markers were also greater on PLLA and PLLA-pl compared to TCPS. Higher levels of collagen I, osteonectin and bone morphogenetic protein-2 were detected on PLLA-COL compared to PLLA and PLLA-pl. Runx2 and osteocalcin were also expressed continuously on all scaffolds during induction. These observations suggested the enhanced proliferation and osteogenic differentiation of USSC on PLLA-COL nanofiber scaffolds and introduced a new combination of stem cell-scaffold constructs with desired characteristics for application in bone tissue engineering.

Improvement of the cell-loading efficiency of biomaterials by inoculation with stem cell-based microspheres, in osteogenesis

In critical-size bone defects, autologous or allogenic cells are required in addition to compatible biomaterials for the successful defect healing. State of the art inoculation methods of biomaterials are based on the application of cell suspensions to the biomaterial. However, only less amounts of cells can be applied and sufficient adhesion to the material is required. Therefore, it was investigated whether the advantages of stem cell-based microspheres and insoluble collagenous bone matrix (ICBM) scaffolds can be combined which can lead to an advancement in cell seeding on biomaterials. Microspheres were produced from unrestricted somatic stem cells from human umbilical cord blood and were mounted on ICBM scaffolds. Following the incubation with osteogenic or control medium, the constructs were analyzed histologically after 3, 7, 14, and 28 days. Alizarin Red S and von Kossa staining revealed microsphere mineralization after 3 days in osteogenic and after 14 days in control medium. Meanwhile, a time-dependent increase in tissue, growing out of the microspheres, was detected. Our results provide evidence that microsphere-ICBM constructs are promising candidates for approaches of bone regeneration. They allow the transfer of substantially high numbers of cells in partially mineralized constructs.

Three dimensional dental epithelial-mesenchymal constructs of predetermined size and shape for tooth regeneration

While it is known that precise dental epithelial-mesenchymal (DE-DM) cell interactions provide critical functions in tooth development, reliable methods to establish proper DE-DM cell interactions for tooth regeneration have yet to be established. To address this challenge, and to generate bioengineered teeth of predetermined size and shape, in this study, we characterize three dimensional (3D) pre-fabricated DE-DM cell constructs. Human dental pulp cell seeded Collagen gel layers were co-cultured with porcine DE cells suspended in Growth Factor Reduced (GFR) Matrigel. The resulting 3D DE-DM cell layers were cultured in vitro, or implanted and grown subcutaneously in vivo in nude rats. Molecular, histological and immunohistochemical (IHC) analyses of harvested implants revealed organized DE-DM cell interactions, the induced expression of dental tissue-specific markers Amelogenin (AM) and Dentin Sialophosphoprotein (DSPP), and basement membrane markers Laminin 5 and collagen IV, and irregular mineralized tissue formation after 4 weeks. We anticipate that these studies will facilitate the eventual establishment of reliable methods to elaborate dental tissues, and full sized teeth of specified sized and shape.