Assessing radiation dose limits for X-ray fluorescence microscopy analysis of plant specimens

Exploring low-dose gamma radiation effects on monoterpene biosynthesis in Thymus vulgaris: insights into plant defense mechanisms

Thymus vulgaris, commonly known as thyme, is a plant renowned for producing monoterpenes. This study aimed to understand the effects of low-dose gamma radiation, specifically in the range of 1-5 Gy, on various traits of Thymus vulgaris, providing context on its importance in agricultural and medicinal applications. The research explored morpho-physiological, biochemical, and gene-expression responses in thyme plants under no gamma- and gamma-ray exposure conditions. The study revealed complex relationships between gamma-ray doses and plant characteristics. In particular, shoot and root lengths initially increased with low doses (1-3 Gy) but decreased at higher doses (5 Gy), suggesting a dose-dependent threshold effect. Similarly, shoot and root fresh weights displayed an initial increase followed by a decline with increasing doses. Biochemical parameters showed dose-dependent responses, with low to moderate doses (1-3 Gy) stimulating enzyme activities and high doses (5 Gy) inhibiting them. Gene expression analysis was focused on the following specific genes: thymol synthase, γ-terpinene synthase, and carvacrol synthase. Low to moderate doses increased the expression of these genes, resulting in increased production of bioactive compounds. However, higher doses had diminished effects or suppressed gene expression. Metabolite analysis demonstrated dose-dependent responses, with moderate doses enhancing secondary metabolite production, while higher doses provided limited benefits. These findings underscore the implications of using gamma radiation to enhance secondary metabolite production in plants and its potential applications in agriculture, medicine, and environmental science. The study emphasizes the potential of gamma radiation as an external stressor to influence plant responses and highlights the importance of understanding such effects in various fields.

Mechanisms of Uptake and Translocation of Thallium in Brassica Vegetables: An X-ray Fluorescence Microspectroscopic Investigation

Most nonoccupational human exposure to thallium (Tl) occurs via consumption of contaminated food crops. Brassica cultivars are common crops that can accumulate more than 500 μg Tl g-1. Knowledge of Tl uptake and translocation mechanisms in Brassica cultivars is fundamental to developing methods to inhibit Tl uptake or conversely for potential use in phytoremediation of polluted soils. Brassica cultivars (25 in total) were subjected to Tl dosing to screen for Tl accumulation. Seven high Tl-accumulating varieties were selected for follow-up Tl dosing experiments. The highest Tl accumulating Brassica cultivars were analyzed by synchrotron-based micro-X-ray fluorescence to investigate the Tl distribution and synchrotron-based X-ray absorption near-edge structure spectroscopy (XANES) to unravel Tl chemical speciation. The cultivars exhibited different Tl tolerance and accumulation patterns with some reaching up to 8300 μg Tl g-1. The translocation factors for all the cultivars were >1 with Brassica oleracea var. acephala (kale) having the highest translocation factor of 167. In this cultivar, Tl is preferentially localized in the venules toward the apex and along the foliar margins and in minute hot spots in the leaf blade. This study revealed through scanning electron microscopy and X-ray fluorescence analysis that highly Tl-enriched crystals occur in the stoma openings of the leaves. The finding is further validated by XANES spectra that show that Tl(I) dominates in the aqueous as well as in the solid form. The high accumulation of Tl in these Brassica crops has important implications for food safety and results of this study help to understand the mechanisms of Tl uptake and translocation in these crops.

Research progress of the detection and analysis methods of heavy metals in plants

Heavy metal (HM)-induced stress can lead to the enrichment of HMs in plants thereby threatening people's lives and health via the food chain. For this reason, there is an urgent need for some reliable and practical techniques to detect and analyze the absorption, distribution, accumulation, chemical form, and transport of HMs in plants for reducing or regulating HM content. Not only does it help to explore the mechanism of plant HM response, but it also holds significant importance for cultivating plants with low levels of HMs. Even though this field has garnered significant attention recently, only minority researchers have systematically summarized the different methods of analysis. This paper outlines the detection and analysis techniques applied in recent years for determining HM concentration in plants, such as inductively coupled plasma mass spectrometry (ICP-MS), atomic absorption spectrometry (AAS), atomic fluorescence spectrometry (AFS), X-ray absorption spectroscopy (XAS), X-ray fluorescence spectrometry (XRF), laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS), non-invasive micro-test technology (NMT) and omics and molecular biology approaches. They can detect the chemical forms, spatial distribution, uptake and transport of HMs in plants. For this paper, the principles behind these techniques are clarified, their advantages and disadvantages are highlighted, their applications are explored, and guidance for selecting the appropriate methods to study HMs in plants is provided for later research. It is also expected to promote the innovation and development of HM-detection technologies and offer ideas for future research concerning HM accumulation in plants.

High-energy interference-free K-lines synchrotron X-ray fluorescence microscopy of rare earth elements in hyperaccumulator plants

Synchrotron-based micro-X-ray fluorescence analysis (µXRF) is a nondestructive and highly sensitive technique. However, element mapping of rare earth elements (REEs) under standard conditions requires care, since energy-dispersive detectors are not able to differentiate accurately between REEs L-shell X-ray emission lines overlapping with K-shell X-ray emission lines of common transition elements of high concentrations. We aim to test REE element mapping with high-energy interference-free excitation of the REE K-lines on hyperaccumulator plant tissues and compare with measurements with REE L-shell excitation at the microprobe experiment of beamline P06 (PETRA III, DESY). A combination of compound refractive lens optics (CRLs) was used to obtain a micrometer-sized focused incident beam with an energy of 44 keV and an extra-thick silicon drift detector optimized for high-energy X-ray detection to detect the K-lines of yttrium (Y), lanthanum (La), cerium (Ce), praseodymium (Pr), and neodymium (Nd) without any interferences due to line overlaps. High-energy excitation from La to Nd in the hyperaccumulator organs was successful but compared to L-line excitation less efficient and therefore slow (∼10-fold slower than similar maps at lower incident energy) due to lower flux and detection efficiency. However, REE K-lines do not suffer significantly from self-absorption, which makes XRF tomography of millimeter-sized frozen-hydrated plant samples possible. The K-line excitation of REEs at the P06 CRL setup has scope for application in samples that are particularly prone to REE interfering elements, such as soil samples with high concomitant Ti, Cr, Fe, Mn, and Ni concentrations.

Synchrotron science for sustainability: life cycle of metals in the environment

The movement of metals through the environment links together a wide range of scientific fields: from earth sciences and geology as weathering releases minerals; to environmental sciences as metals are mobilized and transformed, cycling through soil and water; to biology as living things take up metals from their surroundings. Studies of these fundamental processes all require quantitative analysis of metal concentrations, locations, and chemical states. Synchrotron X-ray tools can address these requirements with high sensitivity, high spatial resolution, and minimal sample preparation. This perspective describes the state of fundamental scientific questions in the lifecycle of metals, from rocks to ecosystems, from soils to plants, and from environment to animals. Key X-ray capabilities and facility infrastructure for future synchrotron-based analytical resources serving these areas are summarized, and potential opportunities for future experiments are explored.

Chemical transformations of arsenic in the rhizosphere-root interface of Pityrogramma calomelanos and Pteris vittata

Pityrogramma calomelanos and Pteris vittata are cosmopolitan fern species that are the strongest known arsenic (As) hyperaccumulators, with potential to be used in the remediation of arsenic-contaminated mine tailings. However, it is currently unknown what chemical processes lead to uptake of As in the roots. This information is critical to identify As-contaminated soils that can be phytoremediated, or to improve the phytoremediation process. Therefore, this study identified the in situ distribution of As in the root interface leading to uptake in P. calomelanos and P. vittata, using a combination of synchrotron micro-X-ray fluorescence spectroscopy and X-ray absorption near-edge structure imaging to reveal chemical transformations of arsenic in the rhizosphere-root interface of these ferns. The dominant form of As in soils was As(V), even in As(III)-dosed soils, and the major form in P. calomelanos roots was As(III), while it was As(V) in P. vittata roots. Arsenic was cycled from roots growing in As-rich soil to roots growing in control soil. This study combined novel analytical approaches to elucidate the As cycling in the rhizosphere and roots enabling insights for further application in phytotechnologies to remediated As-polluted soils.

Fast X-ray fluorescence microscopy provides high-throughput phenotyping of element distribution in seeds

The concentration, chemical speciation, and spatial distribution of essential and toxic mineral elements in cereal seeds have important implications for human health. To identify genes responsible for element uptake, translocation, and storage, high-throughput phenotyping methods are needed to visualize element distribution and concentration in seeds. Here, we used X-ray fluorescence microscopy (μ-XRF) as a method for rapid and high-throughput phenotyping of seed libraries and developed an ImageJ-based pipeline to analyze the spatial distribution of elements. Using this method, we nondestructively scanned 4,190 ethyl methanesulfonate (EMS)-mutagenized M1 rice (Oryza sativa) seeds and 533 diverse rice accessions in a genome-wide association study (GWAS) panel to simultaneously measure concentrations and spatial distribution of elements in the embryo, endosperm, and aleurone layer. A total of 692 putative mutants and 65 loci associated with the spatial distribution of elements in rice seed were identified. This powerful method provides a basis for investigating the genetics and molecular mechanisms controlling the accumulation and spatial variations of mineral elements in plant seeds.

Cellular-level distribution of manganese in Macadamia integrifolia, M. ternifolia and M. tetraphylla from Australia

Macadamia integrifolia and M. tetraphylla, unlike M. ternifolia, are known for their edible nuts. All three species over-accumulate the trace metal nutrient manganese (Mn) in their shoots. This study seeks to examine tissue- and cellular-level distribution of Mn and other plant nutrients in the three Macadamia species. The distribution of Mn, calcium (Ca), iron (Fe) and potassium (K) were investigated in whole leaves and cross-sections of roots, petioles and leaves using synchrotron-based X-ray Fluorescence Microscopy (µXRF) in M. integrifolia, M. tetraphylla and M. ternifolia. The results show Mn sequestration primarily in the leaf and midrib palisade mesophyll cells of all three species. Leaf interveinal regions, root cortical cells and phloem cells were also found to be Mn-loaded. The current study confirms earlier findings but further reveals that Mn is concentrated in the vacuoles of mesophyll cells owing to the exceptional resolution of the synchrotron µXRF data, and the fact that fresh hydrated samples were used. New insights gained here into Mn compartmentalisation in these highly Mn-tolerant Macadamias expand knowledge about potentially toxic overaccumulation of an essential micronutrient, which ultimately stands to inform strategies around farming edible species in particular.

X-ray Fluorescence Microscopy Methods for Biological Tissues

Synchrotron-based X-ray fluorescence microscopy is a flexible tool for identifying the distribution of trace elements in biological specimens across a broad range of sample sizes. The technique is not particularly limited by sample type and can be performed on ancient fossils, fixed or fresh tissue specimens, and in some cases even live tissue and live cells can be studied. The technique can also be expanded to provide chemical specificity to elemental maps, either at individual points of interest in a map or across a large field of view. While virtually any sample type can be characterized with X-ray fluorescence microscopy, common biological sample preparation methods (often borrowed from other fields, such as histology) can lead to unforeseen pitfalls, resulting in altered element distributions and concentrations. A general overview of sample preparation and data acquisition methods for X-ray fluorescence microscopy is presented, along with outlining the general approach for applying this technique to a new field of investigation for prospective new-users. Considerations for improving data acquisition and quality are reviewed as well as the effects of sample preparation, with a particular focus on soft tissues. The effects of common sample pre-treatment steps as well as the underlying factors that govern which, and to what extent, specific elements are likely to be altered are reviewed along with common artifacts observed in X-ray fluorescence microscopy data.

Strategies for probing absorption and translocation of foliar-applied nutrients

This article comments on:

Li C, Wu J, Pax F, Blamey F, Wang L, Zhou L, Paterson DJ, van der En A, Fernández V, Lombi E, Wang Y, Kopittke PM. 2021. Non-glandular trichomes of sunflower are important in the absorption and translocation of foliar-applied Zn. Journal of Experimental Botany 72, 5079–5092.

Oxidation of ultralene and paraffin due to radiation damage after exposure to soft X-rays probed by FTIR microspectroscopy and X-ray fluorescence

Radiation damage upon soft X-ray exposure is an important issue to be considered in soft X-ray microscopy. The work presented here is part of a more extended study on the topic and focuses on the effects of soft X-rays on paraffin, a common embedding medium for soft-tissues, and on ultralene and Si₃N₄ windows as sample supports. Our studies suggest that the sample environment indeed plays an important role in the radiation damage process and therefore should be carefully taken into account for the analysis and interpretation of new data. The radiation damage effects were followed over time using a combination of Fourier transform infrared (FTIR) microspectroscopy and X-ray fluorescence (XRF), and it was demonstrated that, for higher doses, an oxidation of both embedding medium and ultralene substrate takes place after the irradiated sample is exposed to air. This oxidation is reflected in a clear increase of C=O and O-H infrared bands and on the XRF oxygen maps, correlated with a decrease of the aliphatic infrared signal. The results also show that the oxidation process may affect quantitative evaluation of light element concentrations.

The XFM beamline at the Australian Synchrotron

The X-ray fluorescence microscopy (XFM) beamline is an in-vacuum undulator-based X-ray fluorescence (XRF) microprobe beamline at the 3 GeV Australian Synchrotron. The beamline delivers hard X-rays in the 4-27 keV energy range, permitting K emission to Cd and L and M emission for all other heavier elements. With a practical low-energy detection cut-off of approximately 1.5 keV, low-Z detection is constrained to Si, with Al detectable under favourable circumstances. The beamline has two scanning stations: a Kirkpatrick-Baez mirror microprobe, which produces a focal spot of 2 µm × 2 µm FWHM, and a large-area scanning `milliprobe', which has the beam size defined by slits. Energy-dispersive detector systems include the Maia 384, Vortex-EM and Vortex-ME3 for XRF measurement, and the EIGER2 X 1 Mpixel array detector for scanning X-ray diffraction microscopy measurements. The beamline uses event-mode data acquisition that eliminates detector system time overheads, and motion control overheads are significantly reduced through the application of an efficient raster scanning algorithm. The minimal overheads, in conjunction with short dwell times per pixel, have allowed XFM to establish techniques such as full spectroscopic XANES fluorescence imaging, XRF tomography, fly scanning ptychography and high-definition XRF imaging over large areas. XFM provides diverse analysis capabilities in the fields of medicine, biology, geology, materials science and cultural heritage. This paper discusses the beamline status, scientific showcases and future upgrades.

Soft X-ray induced radiation damage in thin freeze-dried brain samples studied by FTIR microscopy

In order to push the spatial resolution limits to the nanoscale, synchrotron-based soft X-ray microscopy (XRM) experiments require higher radiation doses to be delivered to materials. Nevertheless, the associated radiation damage impacts on the integrity of delicate biological samples. Herein, the extent of soft X-ray radiation damage in popular thin freeze-dried brain tissue samples mounted onto Si₃N₄ membranes, as highlighted by Fourier transform infrared microscopy (FTIR), is reported. The freeze-dried tissue samples were found to be affected by general degradation of the vibrational architecture, though these effects were weaker than those observed in paraffin-embedded and hydrated systems reported in the literature. In addition, weak, reversible and specific features of the tissue-Si₃N₄ interaction could be identified for the first time upon routine soft X-ray exposures, further highlighting the complex interplay between the biological sample, its preparation protocol and X-ray probe.

Time-resolved laboratory micro-X-ray fluorescence reveals silicon distribution in relation to manganese toxicity in soybean and sunflower

BACKGROUND AND AIMS

Synchrotron- and laboratory-based micro-X-ray fluorescence (µ-XRF) is a powerful technique to quantify the distribution of elements in physically large intact samples, including live plants, at room temperature and atmospheric pressure. However, analysis of light elements with atomic number (Z) less than that of phosphorus is challenging due to the need for a vacuum, which of course is not compatible with live plant material, or the availability of a helium environment.

METHOD

A new laboratory µ-XRF instrument was used to examine the effects of silicon (Si) on the manganese (Mn) status of soybean (Glycine max) and sunflower (Helianthus annuus) grown at elevated Mn in solution. The use of a helium environment allowed for highly sensitive detection of both Si and Mn to determine their distribution.

KEY RESULTS

The µ-XRF analysis revealed that when Si was added to the nutrient solution, the Si also accumulated in the base of the trichomes, being co-located with the Mn and reducing the darkening of the trichomes. The addition of Si did not reduce the concentrations of Mn in accumulations despite seeming to reduce its adverse effects.

CONCLUSIONS

The ability to gain information on the dynamics of the metallome or ionome within living plants or excised hydrated tissues can offer valuable insights into their ecophysiology, and laboratory µ-XRF is likely to become available to more plant scientists for use in their research.

Distribution of aluminium in hydrated leaves of tea (Camellia sinensis) using synchrotron- and laboratory-based X-ray fluorescence microscopy

Aluminium (Al) is highly toxic to plant growth, with soluble concentrations being elevated in the ∼40% of arable soils worldwide that are acidic. Determining the distribution of Al in plant tissues is important for understanding the mechanisms by which it is toxic and how some plants tolerate high concentrations. Synchrotron- and laboratory-based X-ray fluorescence microscopy (XFM) is a powerful technique to quantitatively analyse the distribution of elements, including in hydrated and living plants. However, analysis of light elements (z < phosphorus) is extremely challenging due to signal losses in air, and the unsuitability of vacuum environments for (fresh) hydrated plant tissues. This study uses XFM in a helium environment to avoid Al signal loss to reveal the distribution of Al in hydrated plant tissues of Tea (Camellia sinensis). The results show that Al occurs in localised areas across the foliar surface, whereas in cross-sections Al is almost exclusively concentrated in the apoplastic space above and in between adaxial epidermal cells. This distribution of Al is related to the Al tolerance of this species, and accumulation of phytotoxic elements in the apoplastic space, away from sensitive processes such as photosynthesis in the palisade mesophyll cells, is a common tolerance mechanism reported in many different plant species. This study develops an XFM method on both synchrotron and laboratory sources that overcomes the drawbacks of existing analytical techniques, permitting measurement of light elements down to Al in (fresh) hydrated plant tissues.

X-ray fluorescence application in food, feed, and agricultural science: a critical review

Recently X-ray fluorescence techniques have been widely used in food and agricultural science areas. Minimal sample preparation, nondestructive analysis, high spatial resolution, and multiple elements measurements within a single sample are among its advantages. In this review, literature of X-ray fluorescence are extensively researched and summarized from food and agricultural science areas focusing on food safety inspection, food nutrition, plant science, soil science, and Ca-related problems in horticultural crops. In addition, the advantages and disadvantages of X-ray fluorescence comparing with traditional analytical techniques of elements are also discussed. The more advanced technology such as developments of detector, scanning system, beamline capability among others would significantly increase future application of X-ray fluorescence techniques. Combination use of XRF with other tools such as chemometrics or data analytics would greatly improve its prediction performance. These further improvements offer exciting perspectives for the application of X-ray fluorescence in the food and agricultural science areas.

Distribution and chemical form of selenium in Neptunia amplexicaulis from Central Queensland, Australia

Selenium (Se), a trace element essential for human and animal biological processes, is deficient in many agricultural soils. Some extremely rare plants can naturally accumulate extraordinarily high concentrations of Se. The native legume Neptunia amplexicaulis, endemic to a small area near Richmond and Hughenden in Central Queensland, Australia, is one of the strongest Se hyperaccumulators known on Earth, with foliar concentrations in excess of 4000 μg Se g^-1 previously recorded. Here, we report on the Se distribution at a whole plant level using laboratory micro X-ray Fluorescence Microscopy (μXRF) and scanning electron microscopy (SEM-EDS), as well as on chemical forms of Se in various tissues using liquid chromatography-mass spectrometry (LC-MS) and synchrotron X-ray absorption spectroscopy (XAS). The results show that Se occurs in the forms of methyl-selenocysteine and seleno-methionine in the foliar tissues, with up to 13 600 μg Se g^-1 total in young leaves. Selenium was found to accumulate primarily in the young leaves, flowers, pods and taproot, with lower concentrations present in the fine-roots and stem and the lowest present in the oldest leaves. Trichomes were not found to accumulate Se. We postulate that Se is (re)distributed in this plant via the phloem from older leaves to newer leaves, using the taproot as the main storage organ. High concentrations of Se in the nodes (pulvini) indicate this structure may play an important a role in Se (re)distribution. The overall pattern of Se distribution was similar in a non-Se tolerant closely related species (Neptunia gracilis), although the prevailing Se concentrations were substantially lower than in N. amplexicaulis.

Methods to Visualize Elements in Plants

Understanding the distribution of elements in plants is important for researchers across a broad range of fields, including plant molecular biology, agronomy, plant physiology, plant nutrition, and ionomics. However, it is often challenging to evaluate the applicability of the wide range of techniques available, with each having its own strengths and limitations. Here, we compare scanning/transmission electron microscopy-based energy-dispersive x-ray spectroscopy, x-ray fluorescence microscopy, particle-induced x-ray emission, laser ablation inductively coupled plasma-mass spectrometry, nanoscale secondary ion mass spectroscopy, autoradiography, and confocal microscopy with fluorophores. For these various techniques, we compare their accessibility, their ability to analyze hydrated tissues (without sample preparation) and suitability for in vivo analyses, as well as examining their most important analytical merits, such as resolution, sensitivity, depth of analysis, and the range of elements that can be analyzed. We hope that this information will assist other researchers to select, access, and evaluate the approach that is most useful in their particular research program or application.

Spatially Resolved Localization of Lanthanum and Cerium in the Rare Earth Element Hyperaccumulator Fern Dicranopteris linearis from China

The fern Dicranopteris linearis (Gleicheniaceae) from China is a hyperaccumulator of rare earth element (REE), but little is known about the ecophysiology of REE in this species. This study aimed to clarify tissue-level and organ-level distribution of REEs via synchrotron-based X-ray fluorescence microscopy (XFM). The results show that REEs (La + Ce) are mainly colocalized with Mn in the pinnae and pinnules, with the highest concentrations in necrotic lesions and lower concentrations in veins. In the cross sections of the pinnules, midveins, rachis, and stolons, La + Ce and Mn are enriched in the epidermis, vascular bundles, and pericycle (midvein). In these tissues, Mn is localized mainly in the cortex and mesophyll. We hypothesize that the movement of REEs in the transpiration flow in the veins is initially restricted in the veins by the pericycle between vascular bundle and cortex, while excess REEs are transported by evaporation and cocompartmentalized with Mn in the necrotic lesions and epidermis in an immobile form, possibly a Si-coprecipitate. The results presented here provide insights on how D. linearis regulates high concentrations of REEs in vivo, and this knowledge is useful for developing phytotechnological applications (such as REE agromining) using this fern in REE-contaminated sites in China.