An ex vivo evaluation of blood coagulation and thromboresistance of two extracorporeal circuit coatings with reduced and full heparin dose

Development of a Carbon Nanotube-Enhanced FAS Bilayer Amphiphobic Coating for Biological Fluids

This study reports the development of a novel amphiphobic coating. The coating is a bilayer arrangement, where carbon nanotubes (CNTs) form the underlayer and fluorinated alkyl-silane (FAS) forms the overlayer, resulting in the development of highly amphiphobic coatings suitable for a wide range of substrates. The effectiveness of these coatings is demonstrated through enhanced contact angles for water and artificial blood plasma fluid on glass, stainless steel, and porous PTFE. The coatings were characterized using Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), atomic force microscopy (AFM), and contact angle (CA) measurements. The water contact angles achieved with the bilayer coating were 106 ± 2°, 116 ± 2°, and 141 ± 2° for glass, stainless steel, and PTFE, respectively, confirming the hydrophobic nature of the coating. Additionally, the coating displayed high repellency for blood plasma, exhibiting contact angles of 102 ± 2°, 112 ± 2°, and 134 ± 2° on coated glass, stainless steel, and PTFE surfaces, respectively. The presence of the CNT underlayer improved plasma contact angles by 29%, 21.7%, and 16.5% for the respective surfaces. The presence of the CNT layer improved surface roughness significantly, and the average roughness of the bilayer coating on glass, stainless steel, and PTFE was measured to be 488 nm, 301 nm, and 274 nm, respectively. Mechanistically, the CNT underlayer contributed to the surface roughness, while the FAS layer provided high amphiphobicity. The maximum effect was observed on modified glass, followed by stainless steel and PTFE surfaces. These findings highlight the promising potential of this coating method across diverse applications, particularly in the biomedical industry, where it can help mitigate complications associated with device-fluid interactions.

Challenge of material haemocompatibility for microfluidic blood-contacting applications

Biological applications of microfluidics technology is beginning to expand beyond the original focus of diagnostics, analytics and organ-on-chip devices. There is a growing interest in the development of microfluidic devices for therapeutic treatments, such as extra-corporeal haemodialysis and oxygenation. However, the great potential in this area comes with great challenges. Haemocompatibility of materials has long been a concern for blood-contacting medical devices, and microfluidic devices are no exception. The small channel size, high surface area to volume ratio and dynamic conditions integral to microchannels contribute to the blood-material interactions. This review will begin by describing features of microfluidic technology with a focus on blood-contacting applications. Material haemocompatibility will be discussed in the context of interactions with blood components, from the initial absorption of plasma proteins to the activation of cells and factors, and the contribution of these interactions to the coagulation cascade and thrombogenesis. Reference will be made to the testing requirements for medical devices in contact with blood, set out by International Standards in ISO 10993-4. Finally, we will review the techniques for improving microfluidic channel haemocompatibility through material surface modifications-including bioactive and biopassive coatings-and future directions.

Commercial and novel anticoagulant ECMO coatings: a review

Extracorporeal membrane oxygenation (ECMO) is an invasive and last-resort treatment for circulatory and respiratory failure. Prolonged ECMO support can disrupt the coagulation and anticoagulation systems in a patient, leading to adverse consequences, such as bleeding and thrombosis. To address this problem, anticoagulation coatings have been developed for use in ECMO circuits. This article reviews commonly used commercial and novel anticoagulant coatings developed in recent years and proposes a new classification of coatings based on the current state. While commercial coatings have been used clinically for decades, this review focuses on comparing the effectiveness and stability of coatings to support clinical selections. Furthermore, novel anticoagulation coatings often involve complex mechanisms and elaborate design strategies, and this review summarises representative studies on mainstream anticoagulation coatings to provide a point of reference for future studies.

Anti-thrombogenic Surface Coatings for Extracorporeal Membrane Oxygenation: A Narrative Review

Extracorporeal membrane oxygenation (ECMO) is used in critical care to manage patients with severe respiratory and cardiac failure. ECMO brings blood from a critically ill patient into contact with a non-endothelialized circuit which can cause clotting and bleeding simultaneously in this population. Continuous systemic anticoagulation is needed during ECMO. The membrane oxygenator, which is a critical component of the extracorporeal circuit, is prone to significant thrombus formation due to its large surface area and areas of low, turbulent, and stagnant flow. Various surface coatings, including but not limited to heparin, albumin, poly(ethylene glycol), phosphorylcholine, and poly(2-methoxyethyl acrylate), have been developed to reduce thrombus formation during ECMO. The present work provides an up-to-date overview of anti-thrombogenic surface coatings for ECMO, including both commercial coatings and those under development. The focus is placed on the coatings being developed for oxygenators. Overall, zwitterionic polymer coatings, nitric oxide (NO)-releasing coatings, and lubricant-infused coatings have attracted more attention than other coatings and showed some improvement in in vitro and in vivo anti-thrombogenic effects. However, most studies lacked standard hemocompatibility assessment and comparison studies with current clinically used coatings, either heparin coatings or nonheparin coatings. Moreover, this review identifies that further investigation on the thrombo-resistance, stability and durability of coatings under rated flow conditions and the effects of coatings on the function of oxygenators (pressure drop and gas transfer) are needed. Therefore, extensive further development is required before these new coatings can be used in the clinic.

New Trends, Advantages and Disadvantages in Anticoagulation and Coating Methods Used in Extracorporeal Life Support Devices

The use of extracorporeal life support (ECLS) devices has significantly increased in the last decades. Despite medical and technological advancements, a main challenge in the ECLS field remains the complex interaction between the human body, blood, and artificial materials. Indeed, blood exposure to artificial surfaces generates an unbalanced activation of the coagulation cascade, leading to hemorrhagic and thrombotic events. Over time, several anticoagulation and coatings methods have been introduced to address this problem. This narrative review summarizes trends, advantages, and disadvantages of anticoagulation and coating methods used in the ECLS field. Evidence was collected through a PubMed search and reference scanning. A group of experts was convened to openly discuss the retrieved references. Clinical practice in ECLS is still based on the large use of unfractionated heparin and, as an alternative in case of contraindications, nafamostat mesilate, bivalirudin, and argatroban. Other anticoagulation methods are under investigation, but none is about to enter the clinical routine. From an engineering point of view, material modifications have focused on commercially available biomimetic and biopassive surfaces and on the development of endothelialized surfaces. Biocompatible and bio-hybrid materials not requiring combined systemic anticoagulation should be the future goal, but intense efforts are still required to fulfill this purpose.

Heparin-coated vs. Non-coated Cardiopulmonary Bypass Circuits: Comparing Immediate Results with Different Target Activated Clotting Time

Objective

To compare immediate postoperative results in patients receiving heparin-albumin-coated and non-coated circuits.

Methods

A total of 241 patients undergoing on-pump cardiac surgery were divided into two groups: those receiving heparin-coated circuits (Bioline®, Maquet Cardiopulmonary AG., Hirrlingen, Germany) and those receiving non-coated circuits (Maquet Cardiopulmonary AG., Hirrlingen, Germany).

Results

Activated clotting times (ACT) during cardiopulmonary bypass (CPB) were significantly shorter in the heparin-albumin-coated group than in the non-coated group (355.64±34.12 vs. 560.38±90.20, respectively, P=0.001). In-hospital mortality and postoperative stroke rates and lengths of intensive care unit stay were similar between the groups; in contrast, in the heparin-albumin-coated group, patients had significantly better outcomes for hospital stay, drainage, and need for erythrocyte transfusion.

Conclusion

Heparin-coated circuits and reduced level of systemic heparinization with 300 seconds of target ACT level in cardiac surgery under CPB are safe and result in a very satisfactory clinical course.

Recent advances in heparinization of polymeric membranes for enhanced continuous blood purification

Continuous blood purification technology such as hemodiafiltration has been used worldwide for saving patients suffering from severe diseases or organ function failure, especially in the intensive care unit and emergency setting. The filters as core devices are commonly made of polymer materials as hollow fiber membranes. However, the membrane is often inductively blocked by blood clot formation due to its interactions with blood components. Heparin is the anticoagulant often used in clinical practice for anti-coagulation. Recently, heparin is also employed to modify the hollow fiber membranes either chemically or physically to improve the filtration performance. This review summarizes recent advances in methodology for surface heparinization of such hollow fiber membranes, and their filtration performance improvement. The review also provides expert opinions for further research in this rapidly expanding field.

Efficacy of Flow Monitoring During ECMO

The hypothesis that blood flow monitoring could serve as an effective early indicator of distal obstruction during extracorporeal membrane oxygenation (ECMO) was tested under controlled experimental conditions. The ECMO circuit typically includes (or could be easily modified to include) a shunt that bifurcates from the main line returning a small amount of blood to the pump with access points for drug infusions. Distal circuit obstructions in the oxygenator and beyond will result in an increased diversion of flow from the distal line to the shunt. Thus, elevations in flow through the shunt can serve as a marker for distal circuit obstruction. An ECMO training circuit was adapted with a resistance chamber that simulates controlled and varying levels of distal obstructions. Experiments were conducted under pediatric and adult pump target flow rates simulating different levels of distal obstructions while documenting the shunt flow and pressure drop across the obstruction. There was measurable and statistically significant elevation in the shunt flow at all flow rates because of different levels of obstruction from baseline values and hence consistent with the hypothesis that shunt flow can serve as an indicator of distal obstruction in the ECMO circuit. Flow monitoring is over the tube, hands free, continuous, and easy to implement. Therefore, it has the potential to serve as an early nonspecific indicator of elevated distal resistance in the ECMO circuit, which can then trigger other measurements (such as pressure drop across the oxygenator) for a more specific assessment of the source for distal resistance.

Device thrombosis and pre-clinical blood flow models for assessing antithrombogenic efficacy of drug-device combinations

Thrombosis associated with blood-contacting devices is a complex process involving several component interactions that have eluded precise definition. Extensive investigations of individual biological modules such as protein adsorption, coagulation cascade activation and platelet activation/adhesion/aggregation have provided an initial foundation for developing biomaterials for blood-contacting devices, but a material that is intrinsically non-thrombogenic is yet to be developed. The well-recognized association between fluid dynamics parameters such as shear stress, vortices, stagnation and thrombotic processes such as platelet aggregation and coagulation aggravate thrombosis on most device geometries that elicit these flow disturbances. Thus, antithrombotic drugs that were developed to treat thrombosis associated with vascular diseases such as atherosclerosis have also been adapted to mitigate the risk of device thrombosis. However, balancing the risk of bleeding with the antithrombotic efficacy of these drugs continues to be a challenge, and surface modification of devices with these drug molecules to mitigate device thrombosis locally has been explored. Pre-clinical blood flow models to test the effectiveness of these drug-device combinations have also evolved and several in-vitro, ex-vivo, and in-vivo test configurations are available with their attendant merits and limitations. Despite considerable efforts toward iterative design and testing of blood contacting devices and antithrombogenic surface modifications, device thrombosis remains an unsolved problem.

Platelets activation is associated with elevated plasma mitochondrial DNA during cardiopulmonary bypass

BACKGROUND

Mitochondrial DNA (mtDNA) was reported as a pro-inflammatory agent. In our previous study, elevation of plasma mtDNA was revealed after cardiac surgery with cardiopulmonary bypass (CPB). Platelets were activated during the cardiac surgery and recent study revealed its ability to release mtDNA. Our present study postulated that the elevated plasma mtDNA comes from activated platelets, which plays a critical role in post-CPB inflammatory responses.

METHODS

Sixty-eight patients who underwent coronary artery bypass graft (CABG) with CPB were enrolled in our study. Blood samples were collected before induction of anaesthesia (T1), at the end of CPB (T2), 12 h post-CPB (T3), 24 h post-CPB (T4), 48 h post-CPB (T5) and 72 h post-CPB (T6). Blood samples were analyzed for the routine blood test and prepared for plasma isolation. MtDNA concentration was measured by rt-PCR, and TNF-α and IL-6 were examined by specific ELISA kits. Subgroup study was analyzed by activation levels of platelet. Basic information, mtDNA level, TNF-α level and IL-6 level were all carefully studied in each quartile.

RESULTS

Activation level of platelets increased and peaked at T2, which decreased gradually from T3 to T6 (P < 0.05). MtDNA increased after CPB, peaked at T3, and then backed from T4 to T6 (P < 0.05). Bivariate correlation between peak activation level of platelets and peak plasma mtDNA level showed a positive correlation between these two parameters (r = 0.683, P < 0.0001). Both TNF-α and IL-6 showed similar patterns as mtDNA, with an increase from T1 to T3 and a decrease from T4 to T6 (P < 0.05). Subgroup analysis further demonstrated that patients with higher activation levels of PLT had higher plasma mtDNA levels and inflammatory level (P < 0.05).

CONCLUSIONS

Our study revealed the dynamic changes of activation level of platelets and identified the interesting association between platelets activation and plasma mtDNA, suggesting a novel potential mechanism of activated platelets-induced post-CPB inflammatory responses.

Ex vivo simulation of cardiopulmonary bypass with human blood for hemocompatibility testing

OBJECT

Experimental circuits for biomaterial surface testing are frequently limited by the tested blood volume, composition of the circuit, flow conditions and the use of animal blood. This report describes an ex vivo set-up for simulated cardiopulmonary bypass with human blood perfusion. We investigated the clinical generalizability of the observed effects on hematological and metabolic parameters and the hemocompatibility of the system.

METHODS

The simulated cardiopulmonary bypass circuit consisted of a heparin-coated tubing system connected to an oxygenator and a venous reservoir. Normothermic flow of blood obtained from healthy donors was maintained at 2.4 L/min/m(2) by a roller pump. Heparin was dosed to obtain a target activated clotting time (ACT) ⩾500 s. Blood was drawn at baseline and 0, 10, 60 and 120 minutes following the initiation of blood flow to determine hematological and metabolic parameters and the hemocompatibility of the extracorporeal system. Data were analyzed using repeated measures ANOVA.

RESULTS

Two hours of blood perfusion resulted in a small, but clinically unimportant reduction in hematocrit, whereas hemoglobin levels and red blood cell, platelet and leukocyte counts remained stable. There was a significant increase in ACT throughout the experiment. While pO2 levels and the pH remained unaltered during the experiment, pCO2 values decreased from 51 ± 6 mmHg at T0 to 41 ± 3 mmHg at T120 (p<0.001). Simulated cardiopulmonary bypass induced a two-fold increase in C3a (p=0.001) while tissue factor was decreased from 44 ± 14 pg/mL at T0 to 38 ± 13 pg/mL at T120 (p=0.009). Levels of CD40L, prothrombin fragment 1+2, β-thromboglobulin and factor VIIa remained stable over time.

CONCLUSION

The ex vivo set-up for simulated cardiopulmonary bypass mimicked the clinical cardiosurgical setting. Exposure of fresh donor blood to the extracorporeal circuit showed a good hemocompatibility, indicated by maintained hematological parameters and a mild immune response.

Development and hemocompatibility testing of nitric oxide releasing polymers using a rabbit model of thrombogenicity

Hemocompatibility is the goal for any biomaterial contained in extracorporeal life supporting medical devices. The hallmarks for hemocompatibility include nonthrombogenicity, platelet preservation, and maintained platelet function. Both in vitro and in vivo assays testing for compatibility of the blood/biomaterial interface have been used over the last several decades to ascertain if the biomaterial used in medical tubing and devices will require systemic anticoagulation for viability. Over the last 50 years systemic anticoagulation with heparin has been the gold standard in maintaining effective extracorporeal life supporting. However, the biomaterial that maintains effective ECLS without the use of any systemic anticoagulant has remained elusive. In this review, the in vivo 4-h rabbit thrombogenicity model genesis will be described with emphasis on biomaterials that may require no systemic anticoagulation for extracorporeal life supporting longevity. These novel biomaterials may improve extracorporeal circulation hemocompatibility by preserving near resting physiology of the major blood components, the platelets and monocytes. The rabbit extracorporeal circulation model provides a complete assessment of biomaterial interactions with the intrinsic coagulation players, the circulating platelet and monocytes. This total picture of blood/biomaterial interaction suggests that this rabbit thrombogenicity model could provide a standardization for biomaterial hemocompatibility testing.