Complete sequence of IS3

Firmicutes-enriched IS1447 represents a group of IS3-family insertion sequences exhibiting unique + 1 transcriptional slippage

BACKGROUND

Bacterial insertion sequences (ISs) are ubiquitous mobile genetic elements that play important roles in genome plasticity, cell adaptability, and function evolution. ISs of various families and subgroups contain significantly diverse molecular features and functional mechanisms that are not fully understood.

RESULTS

IS1447 is a member of the widespread IS3 family and was previously detected to have transposing activity in a typical thermophilic and cellulolytic microorganism Clostridium thermocellum. Phylogenetic analysis showed that IS1447-like elements are widely distributed in Firmicutes and possess unique features in the IS3 family. Therefore, IS1447 may represent a novel subgroup of the IS3 family. Unlike other well-known IS3 subgroups performing programmed - 1 translational frameshifting for the expression of the transposase, IS1447 exhibits transcriptional slippage in both the + 1 and - 1 directions, each with a frequency of ~ 16%, and only + 1 slippage results in full-length and functional transposase. The slippage-prone region of IS1447 contains a run of nine A nucleotides following a stem-loop structure in mRNA, but mutagenesis analysis indicated that seven of them are sufficient for the observed slippage. Western blot analysis indicated that IS1447 produces three types of transposases with alternative initiations. Furthermore, the IS1447-subgroup elements are abundant in the genomes of several cellulolytic bacteria.

CONCLUSION

Our result indicated that IS1447 represents a new Firmicutes-enriched subgroup of the IS3 family. The characterization of the novel IS3-family member will enrich our understanding of the transposition behavior of IS elements and may provide insight into developing IS-based mutagenesis tools for thermophiles.

Resolution of Specific Nucleotide Mismatches by Wild-Type and AZT-Resistant Reverse Transcriptases during HIV-1 Replication

A key contributor to HIV-1 genetic variation is reverse transcriptase errors. Some mutations result because reverse transcriptase (RT) lacks 3' to 5' proofreading exonuclease and can extend mismatches. However, RT also excises terminal nucleotides to a limited extent, and this activity contributes to AZT resistance. Because HIV-1 mismatch resolution has been studied in vitro but only indirectly during replication, we developed a novel system to study mismatched base pair resolution during HIV-1 replication in cultured cells using vectors that force template switching at defined locations. These vectors generated mismatched reverse transcription intermediates, with proviral products diagnostic of mismatch resolution mechanisms. Outcomes for wild-type (WT) RT and an AZT-resistant (AZT(R)) RT containing a thymidine analog mutation set-D67N, K70R, D215F, and K219Q-were compared. AZT(R) RT did not excise terminal nucleotides more frequently than WT, and for the majority of tested mismatches, both WT and AZT(R) RTs extended mismatches in more than 90% of proviruses. However, striking enzyme-specific differences were observed for one mispair, with WT RT preferentially resolving dC-rC pairs either by excising the mismatched base or switching templates prematurely, while AZT(R) RT primarily misaligned the primer strand, causing deletions via dislocation mutagenesis. Overall, the results confirmed HIV-1 RT's high capacity for mismatch extension during virus replication and revealed dramatic differences in aberrant intermediate resolution repertoires between WT and AZT(R) RTs on one mismatched replication intermediate. Correlating mismatch extension frequencies observed here with reported viral mutation rates suggests a complex interplay of nucleotide discrimination and mismatch extension drives HIV-1 mutagenesis.

Characterization of the ospZ promoter in Shigella flexneri and its regulation by VirB and H-NS

OspZ is an effector protein of the type III secretion system in Shigella spp. that downregulates the human inflammatory response during bacterial infection. The ospZ gene is located on the large virulence plasmid of Shigella. Many genes on this plasmid are transcriptionally repressed by the nucleoid structuring protein H-NS and derepressed by VirB, a DNA-binding protein that displays homology to the plasmid partitioning proteins ParB and SopB. In this study, we characterized the ospZ promoter and investigated its regulation by H-NS and VirB in Shigella flexneri. We show that H-NS represses and VirB partially derepresses the ospZ promoter. H-NS-mediated repression requires sequences located between -731 and -412 relative to the beginning of the ospZ gene. Notably, the VirB-dependent derepression of ospZ requires the same VirB binding sites as are required for the VirB-dependent derepression of the divergent icsP gene. These sites are centered 425 bp upstream of the ospZ gene but over 1 kb upstream of the icsP transcription start site. Although these VirB binding sites lie closer to ospZ than icsP, the VirB-dependent increase in ospZ promoter activity is lower than that observed at the icsP promoter. This indicates that the proximity of VirB binding sites to Shigella promoters does not necessarily correlate with the level of VirB-dependent derepression. These findings have implications for virulence gene regulation in Shigella and other pathogens that control gene expression using mechanisms of transcriptional repression and derepression.

Evolutionary blueprint for host- and niche-adaptation in Staphylococcus aureus clonal complex CC30

Staphylococcus aureus clonal complex CC30 has caused infectious epidemics for more than 60 years, and, therefore, provides a model system to evaluate how evolution has influenced the disease potential of closely related strains. In previous multiple genome comparisons, phylogenetic analyses established three major branches that evolved from a common ancestor. Clade 1, comprised of historic pandemic phage type 80/81 methicillin susceptible S. aureus (MSSA), and Clade 2 comprised of contemporary community acquired methicillin resistant S. aureus (CA-MRSA) were hyper-virulent in murine infection models. Conversely, Clade 3 strains comprised of contemporary hospital associated MRSA (HA-MRSA) and clinical MSSA exhibited attenuated virulence, due to common single nucleotide polymorphisms (SNP's) that abrogate production of α-hemolysin Hla, and interfere with signaling of the accessory gene regulator agr. We have now completed additional in silico genome comparisons of 15 additional CC30 genomes in the public domain, to assess the hypothesis that Clade 3 has evolved to favor niche adaptation. In addition to SNP's that influence agr and hla, other common traits of Clade 3 include tryptophan auxotrophy due to a di-nucleotide deletion within trpD, a premature stop codon within isdH encoding an immunogenic cell surface protein involved in iron acquisition, loss of a genomic toxin–antitoxin (TA) addiction module, acquisition of S. aureus pathogenicity islands SaPI4, and SaPI2 encoding toxic shock syndrome toxin tst, and increased copy number of insertion sequence ISSau2, which appears to target transcription terminators. Compared to other Clade 3 MSSA, S. aureus MN8, which is associated with Staphylococcal toxic shock syndrome, exhibited a unique ISSau2 insertion, and enhanced production of toxic shock syndrome toxin encoded by SaPI2. Cumulatively, our data support the notion that Clade 3 strains are following an evolutionary blueprint toward niche-adaptation.

The L-Arabinan utilization system of Geobacillus stearothermophilus

Geobacillus stearothermophilus T-6 is a thermophilic soil bacterium that has a 38-kb gene cluster for the utilization of arabinan, a branched polysaccharide that is part of the plant cell wall. The bacterium encodes a unique three-component regulatory system (araPST) that includes a sugar-binding lipoprotein (AraP), a histidine sensor kinase (AraS), and a response regulator (AraT) and lies adjacent to an ATP-binding cassette (ABC) arabinose transport system (araEGH). The lipoprotein (AraP) specifically bound arabinose, and gel mobility shift experiments showed that the response regulator, AraT, binds to a 139-bp fragment corresponding to the araE promoter region. Taken together, the results showed that the araPST system appeared to sense extracellular arabinose and to activate a specific ABC transporter for arabinose (AraEGH). The promoter regions of the arabinan utilization genes contain a 14-bp inverted repeat motif resembling an operator site for the arabinose repressor, AraR. AraR was found to bind specifically to these sequences, and binding was efficiently prevented in the presence of arabinose, suggesting that arabinose is the molecular inducer of the arabinan utilization system. The expression of the arabinan utilization genes was reduced in the presence of glucose, indicating that regulation is also mediated via a catabolic repression mechanism. The cluster also encodes a second putative ABC sugar transporter (AbnEFJ) whose sugar-binding lipoprotein (AbnE) was shown to interact specifically with linear and branched arabino-oligosaccharides. The final degradation of the arabino-oligosaccharides is likely carried out by intracellular enzymes, including two α-l-arabinofuranosidases (AbfA and AbfB), a β-l-arabinopyranosidase (Abp), and an arabinanase (AbnB), all of which are encoded in the 38-kb cluster.

Identification of the -1 translational frameshift sites using a liquid chromatography-tandem mass spectrometric approach

Translational frameshifting, a ubiquitous mechanism used to produce alternative proteins for different biological purposes, appears in a variety of genes in probably all organisms. In the past, the combinational use of sophisticated expression vectors, specific endopeptidases, and Edman degradation has been the main approach for identification of the translational frameshift sites. Although Edman degradation is highly reliable, it is also time-consuming and costly. In this article, we report a new liquid chromatography-tandem mass spectrometric (LC-MS/MS) approach for identifying the -1 translational frameshift sites. The approach consists of three steps: (i) LC-MS/MS analysis of the protein digests, (ii) primary data analysis using the known mRNA sequence, and (iii) advanced data analysis using a new database containing distinct mRNA sequences with single insertion at particular positions. We first validated our approach by analyzing the previously documented slippery sequence, A4G, from IS3. With this approach, we further determined whether the TTTTTTG (T6G) sequence of IS1372 from Streptomyces lividans had the -1 translational frameshifting potential. The identified amino acid sequence of the transframe peptide indicated that the -1 frameshifting occurred at the T6G motif, as predicted previously. The results on IS3 (A4G) and IS1372 (T6G) suggested that this approach is effective for the translational frameshifting studies.

Genetic diversity at alkB locus in Brucella abortus

DNA polymorphism of the alkB gene, a DNA repair gene, was assessed by PCR on Brucella abortus biovars 1 (strains 99, S19, 45/20, RB51 and 2308), 3 (Tulya strain), 5 (B3196 strain) and 6 (870 strain). A DNA repetitive element, named IS711, was detected in all studied biovars 1 and its complete nucleotide sequence was determined. We found that the element in alkB gene, bounded by 14 bp imperfect inverted repeats (IRs), is 840 bp long and appears to duplicate a consensus target site, CTAG. Analysing its nucleotide sequence of both forward and reverse strands, more than 10 open reading frames (ORFs) were found. Two potential transposase coding regions were chosen comparing all possible ORFs with the database. Comparing IS711 elements isolated from Brucella species, including both those characterized in our work and the published ones, differences in length and in nucleotide composition were observed among Brucella species, members of the same species and within the same strain. Our results confirm the heterogeneity of IS711 elements in Brucella genus and suggest the possibility to use this element to assess gene and genome diversity and to identify new molecular markers for Brucella species.

Extensive variation in the O-antigen gene cluster within one Salmonella enterica serogroup reveals an unexpected complex history

The 46 serogroups of Salmonella enterica have different O-antigens, and each is thought to have a specific form of the O-antigen cluster. Comparison of the 145 serovars of serogroup B revealed much more intraserogroup genetic diversity than expected. The O27 factor, due to an alpha 1-6 linkage between O units in place of the more common alpha 1-2 linkage and previously thought to be due to a converting bacteriophage, is now shown to be due to a wzy(alpha(1-6)) gene located within the major gene cluster. Surprisingly a remnant of this gene in all O27(-) serovars shows that the ancestor was O27(+). There are six distinct gene cluster forms, five apparently derived by a series of deletions and one by an insertion from an ancestral O27(+) form present in 57 serovars. The history of the gene cluster and movement between subspecies I and II can be traced. Two of the derivative forms still have a functional wzy(alpha(1-6)) gene, while in three it has been inactivated by deletion or insertion. Two of the forms lacking a functional wzy(alpha(1-6)) gene have the wzy(alpha(1-2)) gene first described for strain LT2 as rfc, whereas for the third the wzy gene has not been located.

ISAfe1, an ISL3 family insertion sequence from Acidithiobacillus ferrooxidans ATCC 19859

A 1.3-kb insertion sequence, termed ISAfe1 (U66426), from Acidithiobacillus ferrooxidans ATCC 19859 is described. ISAfe1 exhibits the features of a typical bacterial insertion sequence. It has 26-bp, imperfectly matched, terminal inverted repeats and an open reading frame (ORF) that potentially encodes a transposase (TPase) of 404 amino acids (AAB07489) with significant similarity to members of the ISL3 family of insertion sequences. A potential ribosome-binding site and potential -10 and -35 promoter sites for the TPase ORF were identified, and a +1 transcriptional start site was detected experimentally. A potential outwardly directed -35 site was identified in the right inverted repeat of ISAfe1. A second ORF (ORF B), of unknown function, was found on the complementary strand with significant similarity to ORF 2 of ISAe1 from Ralstonia eutropha. Southern blot analyses demonstrated that ISAfe1-like elements can be found in multiple copies in a variety of A. ferrooxidans strains and that they exhibit transposition. A codon adaptation index (CAI) analysis of the TPase of ISAfe1 indicates that is has a CAI of 0.726 and can be considered well adapted to its host, suggesting that ISAfe1 might be an ancient resident of A. ferrooxidans. Analysis of six of its target sites of insertion in the genome of A. ferrooxidans ATCC 19859 indicates a preference for 8-bp pseudopalindromic sequences, one of which resembles the termini of its inverted repeats. Evidence is presented here that is consistent with the possibility that ISAfe1 can promote both plasmid cointegrate formation and resolution in E. coli.

Identification and distribution of new insertion sequences in the genome of alkaliphilic Bacillus halodurans C-125

Fifteen kinds of new insertion sequences (ISs), IS641 to IS643, IS650 to IS658, IS660, IS662, and IS663, and a group II intron (Bh.Int) were identified in the 4,202,352-bp genome of alkaliphilic Bacillus halodurans C-125. Out of 120 ISs identified in the C-125 genome, 29 were truncated, indicating the occurrence of internal rearrangements of the genome. The ISs other than IS650, IS653, IS660, and IS663 generated a 2- to 9-bp duplication of the target site sequence, and the ISs other than IS650, IS653, and IS657 carry 14- to 64-bp inverted repeats. Sequence analysis revealed that six kinds of ISs (IS642, IS643, IS654, IS655, IS657, and IS658) belong to a separate IS family (IS630, IS21, IS256, IS3, IS200/IS605, and IS30, respectively) as a new member. Also, IS651 and IS652 were characterized as new members of the ISL3 family. Significant similarity was found between the transposase (Tpase) sequences between IS650 and IS653 (78.2%), IS651 and IS652 (56.3%), IS656 and IS662 (71.0%), and IS660 and IS663 (44.5%), but the others showed no similarity to one another. Tpases in 28 members of IS651 in the C-125 genome were found to have become diversified. Most of the IS elements widely distributed throughout the genome were inserted in noncoding regions, although some genes, such as those coding for an ATP-binding cassette transporter/permease, a response regulator, and L-indole 2-dehydrogenase, have been mutated through the insertion of IS elements. It is evident, however, that not all IS elements have transposed and caused rearrangements of the genome in the past 17 years during which strain C-125 was subcultured under neutral and alkaline conditions.

Novel type of fimbriae encoded by the large plasmid of sorbitol-fermenting enterohemorrhagic Escherichia coli O157:H(-)

Sorbitol-fermenting (SF) enterohemorrhagic Escherichia coli (EHEC) O157:H(-) have emerged as important causes of diarrheal diseases and the hemolytic-uremic syndrome in Germany. In this study, we characterized a 32-kb fragment of the plasmid of SF EHEC O157:H(-), pSFO157, which differs markedly from plasmid pO157 of classical non-sorbitol-fermenting EHEC O157:H7. We found a cluster of six genes, termed sfpA, sfpH, sfpC, sfpD, sfpJ, and sfpG, which mediate mannose-resistant hemagglutination and the expression of fimbriae. sfp genes are similar to the pap genes, encoding P-fimbriae of uropathogenic E. coli, but the sfp cluster lacks homologues of genes encoding subunits of a tip fibrillum as well as regulatory genes. The major pilin, SfpA, despite its similarity to PapA, does not cluster together with known PapA alleles in a phylogenetic tree but is structurally related to the PmpA pilin of Proteus mirabilis. The putative adhesin gene sfpG, responsible for the hemagglutination phenotype, shows significant homology neither to papG nor to other known sequences. Sfp fimbriae are 3 to 5 nm in diameter, in contrast to P-fimbriae, which are 7 nm in diameter. PCR analyses showed that the sfp gene cluster is a characteristic of SF EHEC O157:H(-) strains and is not present in other EHEC isolates, diarrheagenic E. coli, or other Enterobacteriaceae. The sfp gene cluster is flanked by two blocks of insertion sequences and an origin of plasmid replication, indicating that horizontal gene transfer may have contributed to the presence of Sfp fimbriae in SF EHEC O157:H(-).

IS1550 from Mycoplasma fermentans is transposable in Escherichia coli

An insertion sequence (IS)-like element (ISMil) was previously isolated from the incognitus strain of Mycoplasma fermentans. With polymerase chain reaction primers corresponding to the left and right terminal inverted repeats of ISMil, a 1.4-kb DNA fragment was amplified from the genome of the M64 strain of M. fermentans. This DNA fragment has structural characteristics similar to those of ISMil and is designated IS1550. One copy of IS1550 encoded two considerable overlapping open reading frames (ORFs), ORF1 and ORF2. A putative translation frame-shift signal AAAAAAG (A6G) was located near the 3'-end of ORF1. This signal might cause a -1 frame-shift to form a fused product of ORF1 and ORF2 with 444 amino acids, which has a significant similarity to the putative transposase of the IS3 family. This copy of IS1550 was shown to be transposable in Escherichia coli ISM612. Its transposition caused a 1465-bp deletion immediately adjacent to the 3'-end of the element and the creation of a pair of 3-bp direct repeats flanking the element at the new insertion site. On the basis of these results, IS1550 was considered a typical transposable element.

Sequence analysis and distribution in Salmonella enterica serovars of IS3-like elements

The genome of Salmonella enterica serovar Enteritidis was shown to possess three IS3-like insertion elements, designated IS1230A, B and C, and each was cloned and their respective deoxynucleotide sequences determined. Mutations in elements IS1230A and B resulted in frameshifts in the open reading frames that encoded a putative transposase to be inactive. IS1230C was truncated at nucleotide 774 relative to IS1230B and therefore did not possess the 3' terminal inverted repeat. The three IS1230 derivatives were closely related to each other based on nucleotide sequence similarity. IS1230A was located adjacent to the sef operon encoding SEF14 fimbriae located at minute 97 of the genome of S. Enteritidis. IS1230B was located adjacent to the umuDC operon at minute 42.5 on the genome, itself located near to one terminus of an 815-kb genome inversion of S. Enteritidis relative to S. Typhimurium. IS1230C was located next to attB, the bacteriophage P22 attachment site, and proB, encoding gamma-glutamyl phosphate reductase. A truncated 3' remnant of IS1230, designated IS1230T, was identified in a clinical isolate of S. Typhimurium DT193 strain 2391. This element was located next to attB adjacent to which were bacteriophage P22-like sequences. Southern hybridisation of total genomic DNA from eighteen phage types of S. Enteritidis and eighteen definitive types of S. Typhimurium showed similar, if not identical, restriction fragment profiles in the respective serovars when probed with IS1230A.

Linearization and transposition of circular molecules of insertion sequence IS3

IS3 transposase has been shown to promote production of characteristic circular and linear IS3 molecules from the IS3-carrying plasmid; IS3 circles have the entire IS3 sequence with terminal inverted repeats, IRL and IRR, which are separated by a three base-pair sequence originally flanking either end in the parental plasmid, whereas linear IS3 molecules have three nucleotide overhangs at their 5' ends. Here, we showed that a plasmid carrying an IS3 derivative, which is flanked by different sequences at both ends, generated IS3 circles and linear IS3 molecules owing to the action of transposase. Cloning and sequencing analyses of the linear molecules showed that each had the same 5'-protruding three nucleotide overhanging sequences at both ends, suggesting that the linear molecules were not generated from the parental plasmid by the two double-strand breaks at both end regions of IS3. The plasmid carrying IS3 with a two base-pair mutation in the terminal dinucleotide, which would be required for transposase to cleave the 3' end of IS3, could still generate linear molecules as well as circles. Plasmids bearing an IS3 circle were cleaved by transposase and gave linear molecules with the same 5'-protruding three nucleotide overhanging sequences. These show that the linear molecules are generated from IS3 circles via a double-strand break at the three base-pair intervening sequence. Plasmids carrying an IS3 circle with the two base-pair end mutation still were cleaved by transposase, though with reduced efficiencies, suggesting that IS3 transposase has the ability to cleave not only the 3' end of IS3, but a site three nucleotides from the 5' end of IS3. IS3 circles also were shown to transpose to the target plasmids. The end mutation almost completely inhibited this transposition, showing that the terminal dinucleotides are important for the transfer of the 3' end of IS3 to the target as well as for the end cleavage.

Complete DNA sequence and structural analysis of the enteropathogenic Escherichia coli adherence factor plasmid

The complete nucleotide sequence and organization of the enteropathogenic Escherichia coli (EPEC) adherence factor (EAF) plasmid of EPEC strain B171 (O111:NM) were determined. The EAF plasmid encodes two known virulence-related operons, the bfp operon, which is composed of genes necessary for biosynthesis of bundle-forming pili, and the bfpTVW (perABC) operon, composed of regulatory genes required for bfp transcription and also for transcriptional activation of the eae gene in the LEE pathogenicity island on the EPEC chromosome. The 69-kb EAF plasmid, henceforth designated pB171, contains, besides the bfp and bfpTVW (perABC) operons, potential virulence-associated genes, plasmid replication and maintenance genes, and many insertion sequence elements. Of the newly identified open reading frames (ORFs), two which comprise a single operon had the potential to encode proteins with high similarity to a C-terminal region of ToxB whose coding sequence is located on pO157, a large plasmid harbored by enterohemorrhagic E. coli. Another ORF, located between the bfp and bfpTVW operons, showed high similarity with trcA, a bfpT-regulated chaperone-like protein gene of EPEC. Two sites were found to be putative replication regions: one similar to RepFIIA of p307 or F, and the other similar to RepFIB of R100 (NR1). In addition, we identified a third region that contains plasmid maintenance genes. Insertion elements were scattered throughout the plasmid, indicating the mosaic nature of the EAF plasmid and suggesting evolutionary events by which virulence genes may have been obtained.

Genetic organization of the Escherichia coli K10 capsule gene cluster: identification and characterization of two conserved regions in group III capsule gene clusters encoding polysaccharide transport functions

Analysis of the Escherichia coli K10 capsule gene cluster identified two regions, regions 1 and 3, conserved between different group III capsule gene clusters. Region 1 encodes homologues of KpsD, KpsM, KpsT, and KpsE proteins, and region 3 encodes homologues of the KpsC and KpsS proteins. An rfaH mutation abolished K10 capsule production, suggesting that expression of the K10 capsule was regulated by RfaH in a manner analogous to group II capsule gene clusters. An IS3 element and a phiR73-like prophage, both of which may have played a role in the acquisition of group III capsule gene clusters, were detected flanking the K10 capsule genes.

Identification of PhoP-PhoQ activated genes within a duplicated region of the Salmonella typhimurium chromosome

Salmonellae virulence requires the PhoP-PhoQ two-component regulatory system. PhoP-PhoQ activate the transcription of genes following phagocytosis by macrophages which are necessary for survival within the phagosome environment. Thirteen previously undefined PhoP-activated gene fusions generated by MudJ and TnphoA (pag A, and E-P, respectively) were cloned and sequenced. Most pag products show no similarity to proteins in the database, while others are predicted to encode: a UDP-glucose dehydrogenase (pagA); a protein with similarity to the product of an E. coli aluminium-induced gene (pagH); a protein encoded within a Salmonella-unique region adjacent to the sinR gene (pagN); a protein similar to a product of the Yersinia virulence plasmid (pagO); and a protein with similarity to CrcA which is necessary for resistance of E. coli to camphor (pagP). Of the pag characterized, only pagK, M and O were closely linked. pagJ and pagK were shown to be unlinked but nearly identical in DNA sequence, as each was located within a 1.6 kb DNA duplication. The translations of sequences surrounding pagJ and pagK show similarity to proteins from extrachromosomal elements as well as those involved in DNA transposition and rearrangement, suggesting that this region may have been or is a mobile element. The transcriptional start sites of pagK, M, and J were determined; however, comparison to other known pag gene promoters failed to reveal a consensus sequence for PhoP-regulated activation. DNA sequences hybridizing to a Salmonella typhimurium pagK specific probe were found in S. enteritidis but absent in other Salmonella serotypes and Enterobacteriaceae tested, suggesting that these genes are specific for broad host range Salmonellae that cause diarrhoea in humans. Cumulatively, these data further demonstrate: (1) that PhoP-PhoQ is a global regulator of the production of diverse envelope or secreted proteins; (2) that PhoP-PhoQ regulate the production of proteins of redundant function; and (3) that pag are often located in regions of horizontally acquired DNA that are absent in other Enterobacteriaceae.

Negative regulation of IS2 transposition by the cyclic AMP (cAMP)-cAMP receptor protein complex

Three sequences similar to that of the consensus binding sequence of the cyclic AMP (cAMP)-cAMP receptor protein (CRP) complex were found in the major IS2 promoter region. Experiments were performed to determine whether the cAMP-CRP complex plays a role in the regulation of IS2 transposition. In the gel retardation assay, the cAMP-CRP complex was found to be able to bind the major IS2 promoter. A DNA footprinting assay confirmed that the cAMP-CRP complex binds to the sequences mentioned above. With an IS2 promoter-luciferase gene fusion construct, the cAMP-CRP complex was shown to inhibit transcription from the major IS2 promoter. IS2 was found to transpose at a frequency approximately 200-fold higher in an Escherichia coli host defective for CRP or adenyl cyclase than in a wild-type host. These results suggest that the cAMP-CRP complex is a negative regulator of IS2 transposition.

Insertion element IS3-based PCR method for subtyping Escherichia coli O157:H7

An Escherichia coli O157:H7 subtyping method based on PCR amplification of variable DNA sequences between the repetitive element IS3 was developed. Template DNA was prepared by boiling cells in Chelex. Two separate IS3 PCR amplifications were performed for each isolate: one with a single primer (primer IS3A) and one with two primers (primers IS3A and IS3B). The IS3 PCR subtyping method was applied to 35 epidemiologically related and unrelated E. coli O157:H7 isolates that had been previously characterized by pulsed-field gel electrophoresis (PFGE). PFGE identified 25 different subtypes (difference of one or more bands). PCR with single primer IS3A and primer pair IS3A-IS3B identified 6 and 14 different subtypes, respectively. By combining the results of the two PCR amplifications, 15 different IS3 PCR subtypes were identified. While not as sensitive as PFGE, IS3 PCR subtyping grouped all outbreak-related isolates. IS3 PCR banding patterns were reproducible between amplifications and between subcultures. IS3 PCR could serve as a simple, rapid screening method for the identification of unrelated E. coli O157:H7 isolates.

A T-DNA from the Agrobacterium tumefaciens limited-host-range strain AB2/73 contains a single oncogene

Agrobacterium tumefaciens strain AB2/73 isolated from Lippia canescens has been described as a limited-host-range strain. Its tumor-inducing (Ti) plasmid has been found to lack DNA homology to known T-DNAs (L. Unger, S. F. Ziegler, G. A. Huffman, V. C. Knauf, R. Peet, L. W. Moore, M. P. Gordon, and E. W. Nester. J. Bacteriol. 164:723-730, 1985). We have isolated a T-DNA from AB2/73 by using a heterologous border sequence as a probe. The AB2/73 T-DNA sequence (3,504 bp) is flanked by canonical border sequences, has no detectable DNA homology with other T-DNAs, and contains only two genes: lsn (Lippia strain nopaline synthaselike gene) and lso (Lippia strain oncogene). The lso gene induces nondifferentiating tumors on a limited number of hosts when transferred by a Ti plasmid from a wide-host-range strain. Part of the predicted Lso protein is weakly homologous to other Agrobacterium oncoproteins encoded by rolB, rolB, orf13, gene e, gene 5, and gene 3'. A 28-kb fragment corresponding to the virA to virE region was cloned by using a heterologous vir fragment as probe. The AB2/73 vir region is homologous to most of the C58 virulence region; however, the virA gene is most related to the virA gene of the Agrobacterium vitis limited-host-range strain Ag162.

Avirulence gene D of Pseudomonas syringae pv. tomato may have undergone horizontal gene transfer

Avirulence gene D (avrD) is carried on the B-plasmid of the plant pathogen Pseudomonas syringae pv. tomato with plasmid-borne avrD homologs widely distributed among the Pseudomonads. We now report sequences in the soft rot pathogen Erwinia carotovora that cross-hybridize to avrD suggesting a conserved function beyond avirulence. Alternatively, avrD may have been transferred horizontally among species: (i) DNA linked to avrD shows evidence of class II transpositions and contains a novel IS3-related insertion sequence, and (ii) short sequences linked to avrD are similar to pathogenicity genes from a variety of unrelated pathogens. We have also identified the gene cluster that controls B-plasmid stability.

Role of SefA subunit protein of SEF14 fimbriae in the pathogenesis of Salmonella enterica serovar Enteritidis

In this study, the role of the SefA subunit protein of SEF14 fimbriae in the pathogenesis of Salmonella enterica serovar Enteritidis was investigated. This was accomplished by mutating the sefA gene in the chromosome of two strains of S. enterica serovar Enteritidis by allelic exchange with a copy that has been inactivated by interruption with a nonpolar kanamycin resistance (aphA-3) cassette. The effect of this mutation on the ability of the S. enterica serovar Enteritidis strains to colonize the intestinal epithelium and to invade other tissues was assessed in BALB/c mice and in vitro by adherence and invasion of HeLa cells. Our results show that an avirulent S. enterica serovar Enteritidis vaccine strain, 11RX (no somatic antigen; flagellum antigen phase 1, g,m; flagellum antigen phase 2, -), colonized better and persisted longer in the Peyer's patches of these mice than did its SefA-deficient counterpart. However, no such difference was observed between a highly virulent S. enterica serovar Enteritidis strain, 7314 (somatic antigen, O1, O9, O12; flagellum antigen phase 1, g,m; flagellum antigen phase 2 [1,7]), and its SefA-deficient isogenic mutant. These findings were correlated with in vitro adherence and invasion of HeLa cells. Furthermore, we could not demonstrate a role for SefA in the virulence of S. enterica serovar Enteritidis as assessed by 50% lethal dose determinations. The implications of these findings are discussed.

Identification and characterization of the linear IS3 molecules generated by staggered breaks

Insertion sequences IS3 encodes two, out-of-phase, overlapping open reading frames, orfA and orfB. The OrfAB transframe protein that is IS3 transposase is produced by -1 translational frameshifting between orfA and orfB. Efficient production of the IS3 transposase in the cells harboring the IS3-carrying plasmid has been shown to generate miniplasmids as well as characteristic minicircles, called IS3 circles, consisting of the entire IS3 sequence and one of the 3-base pair sequences flanking IS3 in the parental plasmid. Here, we show that the IS3 transposase also generates the linear molecules of IS3 with 3-nucleotide overhangs at the 5'-ends. The nucleotide sequences of the overhangs are the same as those flanking IS3 in the parental plasmid, suggesting that the linear IS3 molecules are generated from the parental plasmid DNA by staggered double strand breaks at the end regions of IS3. The linear IS3 molecules are likely to be the early intermediates in the transposition reaction, which proceeds in a non-replicative manner.

Genes for CS2 pili of enterotoxigenic Escherichia coli and their interchangeability with those for CS1 pili

We have cloned and sequenced the DNA needed for production of CS2 pili in Escherichia coli K-12. The four open reading frames, cotB, cotA, cotC, and cotD, show homology with the genes needed for production of CS1 and CFA/I pili, which are also found on enterotoxigenic E. coli associated with human diarrheal disease. We also report that CotA plus CotB interact with the CS1 gene products CooC and CooD to form pili that can be visualized by electron microscopy and, conversely, that the CS1 gene products CooA and CooB interact with CotC and CotD to form pili.

Characterization of IS1221 from Mycoplasma hyorhinis: expression of its putative transposase in Escherichia coli incorporates a ribosomal frameshift mechanism

Seven complete and two partial copies of IS1221 variants from Mycoplasma hyorhinis and Mycoplasma hyopneumoniae characterized to date have established a consensus IS1221 as a 1513 bp element with unique structural characteristics resembling the IS3 family of bacterial insertion sequences. Each IS1221 copy contains highly conserved 28 bp imperfect terminal inverted repeats and three distinctive internal inverted repeats (LIR, RIR and IIR). IIR is located within the coding region of the element and it is proposed that it plays a critical role in the regulation of putative transposase expression. Consensus IS1221 and one particular copy, G1135.2, contain a single long open reading frame (ORF). Two potential initiation codons are present at nucleotide 46 (AUG46) and nucleotide 397 (AUG397) and both are preceded by strong ribosome-binding sites. Both initiation codons can be used efficiently in an Escherichia coli T7 expression system. The LIR has a negative regulatory effect on translation initiation from AUG46. A-1 translational frameshift event is shown to be involved in expression of the IS1221 ORF and results in the production of 20 kDa and 6 kDa truncated proteins from the respective upstream initiation codons of the IS1221 ORF. Base substitution and deletion mutations in sequences resembling characterized motifs in documented examples of translational frameshifting resulted in a significant increase in the full-length products and a corresponding decrease in the truncated products from the IS1221 ORF. In contrast to the usual -1 frameshift regulatory event in the IS3 family, which produces a transframe fusion product as the active transposase, IS1221 may have evolved a high-frequency -1 frameshift mechanism that produces a truncated product from the upstream coding domain and thereby results in the regulated low-level production of the full-length presumptive transposase.

Control of translation by mRNA secondary structure: the importance of the kinetics of structure formation

RNA secondary structure is important in a wide variety of biological processes, but relatively little is known about the pathways and kinetics of RNA folding. When the IS10 transposase (tnp) gene is transcribed from a promoter outside the element, little increase in tnp expression is observed. This protection from outside transcription (pot) occurs at the translational level, presumably resulting from mRNA secondary structure proposed to sequester the tnp ribosome-binding site. Here, we confirm the pot RNA structure and show that it blocks 30S ribosomal subunit binding in vitro. Point mutations that abolish protection in vivo map to the pot structure. Surprisingly, these pot mutations do not severely alter the pot secondary structure or increase 30S subunit binding in vitro, except in one case. Using an oligonucleotide hybridization assay, we show that most of the pot mutations slow the kinetics of pot structure formation, with little or no effect on the inhibitory function of the final structure. Moreover, a suppressor mutation reverses this effect. We propose a pathway for pot mRNA folding that is consistent with the mutations and implicates the formation of important kinetic intermediates. The significance of these observations for the RNA folding problem in general is discussed.

Identification of IS1206, a Corynebacterium glutamicum IS3-related insertion sequence and phylogenetic analysis

Integration of plasmid pCGL320 into a Corynebacterium glutamicum ATCC21086 derivative led to tandem amplification of the inserted plasmid (Labarre et al., 1993). One amplification event was associated with integration of an insertion sequence that we have named IS1206. Hybridizing sequences were only found in C. glutamicum strains and at various copy numbers. IS1206 is 1290 bp long, carries 32 bp imperfect inverted repeats and generates a 3 bp duplication of the target DNA upon insertion. IS1206 presents the features characteristic of the IS3 family and part of the DNA sequence centering on the putative transposase region (orfB) is similar to those of IS3 and some other related elements. Phylogenetic analysis of orfB deduced protein sequences from IS1206 and IS3-related elements contradicts the phylogeny of the species, suggesting that evolution of these elements might be complex. Horizontal transfer could be invoked but other alternatives like ancestral polymorphism or/and different rates of evolution could also be involved.

Isolation of a novel IS3 group insertion element and construction of an integration vector for Lactobacillus spp

An insertion sequence (IS) element from Lactobacillus johnsonii was isolated, characterized, and exploited to construct an IS-based integration vector. L. johnsonii NCK61, a high-frequency conjugal donor of bacteriocin production (Laf+) and immunity (Lafr), was transformed to erythromycin resistance (Emr) with the shuttle vector pSA3. The NCK61 conjugative functions were used to mobilize pSA3 into a Laf- Lafs EMs recipient. DNA from the Emr transconjugants transformed into Escherichia coli MC1061 yielded a resolution plasmid with the same size as that of pSA3 with a 1.5-kb insertion. The gram-positive replication region of the resolution plasmid was removed to generate a pSA3-based suicide vector (pTRK327) bearing the 1.5-kb insert of Lactobacillus origin. Plasmid pTRK327 inserted randomly into the chromosomes of both Lactobacillus gasseri ATCC 33323 and VPI 11759. No homology was detected between plasmid and total host DNAs, suggesting a Rec-independent insertion. The DNA sequence of the 1.5-kb region revealed the characteristics of an IS element (designated IS1223): a length of 1,492 bp; flanking, 25-bp, imperfect inverted repeats; and two overlapping open reading frames (ORFs). Sequence comparisons revealed 71.1% similarity, including 35.7% identity, between the deduced ORFB protein of the E. coli IS element IS150 and the putative ORFB protein encoded by the Lactobacillus IS element. A putative frameshift site was detected between the overlapping ORFs of the Lactobacillus IS element. It is proposed that, similar to IS150, IS1223 produces an active transposase via translational frameshifting between two tandem, overlapping ORFs.

Insertion sequence-related genetic variation in resting Escherichia coli K-12

Bacterial subclones recovered from an old stab culture of Escherichia coli K-12 revealed a high degree of genetic diversity, which occurred in spite of a very reduced rate of propagation during storage. This conclusion is based on a pronounced restriction fragment length polymorphism (RFLP) detected upon hybridization with internal fragments of eight resident insertion sequences (IS). Genetic diversity was dependent on the IS considered and, in many cases, a clear consequence of IS transposition. IS5 was particularly active in the generation of variation. All subclones in which IS30 had been active testify to a burst of IS30 transposition. This was correlated with a loss of prototrophy and a reduced growth on rich media. A pedigree of the entire clone could be drawn from the RFLP patterns of the subclones. Out of 118 subclones analyzed, 68 different patterns were found but the putative ancestral population had disappeared. A few patterns were each represented by several subclones displaying improved fitness. These results offer insights into the role of IS elements in the plasticity of the E. coli genome, and they further document that enzyme-mediated DNA rearrangements do occur in resting bacterial cultures.

Natural populations of Escherichia coli and Salmonella typhimurium harbor the same classes of insertion sequences

Despite their close phylogenetic relationship, Escherichia coli and Salmonella typhimurium were long considered as having distinct classes of transposable elements maintained by either host-related factors or very restricted gene exchange. In this study, genetically diverse collections of E. coli and S. typhimurium (subgroup I) were surveyed for the presence of several classes of insertion sequences by Southern blot analysis and the polymerase chain reaction. A majority of salmonellae contained IS1 or IS3, elements originally recovered from E. coli, while IS200, a Salmonella-specific element, was present in about 20% of the tested strains of E. coli. Based on restriction mapping, the extent of sequence divergence between copies of IS200 from E. coli and S. typhimurium is on the order of that observed in comparisons of chromosomally encoded genes from these taxa. This suggests that copies of IS200 have not been recently transferred between E. coli and S. typhimurium and that the element was present in the common ancestor to both species. IS200 is polymorphic within E. coli but homogeneous among isolates of S. typhimurium, providing evidence that these species might differ in their rates of transfer and turnover of insertion sequences.

Identification and characterization of IS1138, a transposable element from Mycoplasma pulmonis that belongs to the IS3 family

Insertion sequence (IS) elements are mobile genetic elements found in prokaryotes. We have identified a repetitive element from Mycoplasma pulmonis, a murine pathogen, that is similar to eubacterial IS elements. By subcloning a single strain of M. pulmonis, we isolated a variant clone in which the IS element had undergone an apparent transposition event. The nucleotide sequences of the element, designated IS1138, and the target site into which it inserted were determined. IS1138 consists of 1288 bp with 18 bp perfect terminal inverted repeats. Sequence analysis of the target site before and after insertion of IS1138 identified a 3 bp duplication of target DNA flanking the element. The predicted amino acids encoded by the major open reading frame of IS1138 share significant similarity with the transposases of the IS3 family. Southern hybridization analysis indicates that repetitive sequences similar to IS1138 are present in most, if not all, strains of M. pulmonis, but IS1138-like sequences were not detected in other mycoplasmal species.

Nucleotide sequence analysis of a transposon (Tn5393) carrying streptomycin resistance genes in Erwinia amylovora and other gram-negative bacteria

A class II Tn3-type transposable element, designated Tn5393 and located on plasmid pEa34 from streptomycin-resistant strain CA11 of Erwinia amylovora, was identified by its ability to move from pEa34 to different sites in plasmids pGEM3Zf(+) and pUCD800. Nucleotide sequence analysis reveals that Tn5393 consists of 6,705 bp with 81-bp terminal inverted repeats and generates 5-bp duplications of the target DNA following insertion. Tn5393 contains open reading frames that encode a putative transposase (tnpA) and resolvase (tnpR) of 961 and 181 amino acids, respectively. The two open reading frames are separated by a putative recombination site (res) consisting of 194 bp. Two streptomycin resistance genes, strA and strB, were identified on the basis of their DNA sequence homology to streptomycin resistance genes in plasmid RSF1010. StrA is separated from tnpR by a 1.2-kb insertion element designated IS1133. The tnpA-res-tnpR region of Tn5393 was detected in Pseudomonas syringae pv. papulans Psp36 and in many other gram-negative bacteria harboring strA and strB. Except for some strains of Erwinia herbicola, these other gram-negative bacteria lacked insertion sequence IS1133. The prevalence of strA and strB could be accounted for by transposition of Tn5393 to conjugative plasmids that are then disseminated widely among gram-negative bacteria.

Cloning and molecular characterization of a gene involved in Salmonella adherence and invasion of cultured epithelial cells

Our laboratories have independently identified a gene in Salmonella choleraesuis and Salmonella typhimurium that is necessary for efficient adherence and entry of these organisms into cultured epithelial cells. Introduction of a mutated gene into several Salmonella strains belonging to different serotypes rendered these organisms deficient for adherence and invasion of cultured cells. This effect was most pronounced in the host-adapted serotypes Salmonella gallinarum, S. choleraesuis, and Salmonella typhi. The nucleotide sequence of this gene, which we have termed invH, encodes a predicted 147-amino-acid polypeptide containing a signal sequence. The InvH predicted polypeptide is highly conserved in S. typhimurium and S. choleraesuis, differing at only three residues. The invH gene was expressed in Escherichia coli using a T7 RNA polymerase expression system and a polypeptide of approximately 16,000 molecular weight was observed, in agreement with the predicted size of its gene product. Upon fractionation, the expressed polypeptide was localized in the bacterial membrane fraction. Southern and colony hybridization analyses indicated that the invH gene is present in all Salmonella strains tested (91 strains belonging to 37 serotypes) with the exception of strains of Salmonella arizonae. No homologous sequences were detected in Yersinia, Shigella, Proteus, and several strains of enteroinvasive and enteropathogenic E. coli. Downstream from the S. choleraesuis (but not S. typhimurium) invH gene, a region with extensive homology to the insertion sequence IS3 was detected.

Cloning and characterization of the mvrC gene of Escherichia coli K-12 which confers resistance against methyl viologen toxicity

A new gene mvrC conferring resistance to methyl viologen, a powerful superoxide radical propagator, was cloned on 13.5 kilo base (kb) EcoRI DNA fragment. It gave resistance against methyl viologen to even a wild-type strain with gene dosage dependence. From the physical maps obtained by restriction enzyme digestions, it was predicted to locate at 580 kbp (12.3 min) on the physical map of E.coli. This was confirmed by the Southern hybridization of lambda phages covering this region with mvrC probe. The DNA sequence of mvrC gene was determined and its deduced protein encoding a 12 kd hydrophobic protein was confirmed by maxicell labeling of MvrC protein.

The evolution of insertion sequences within enteric bacteria

To identify mechanisms that influence the evolution of bacterial transposons, DNA sequence variation was evaluated among homologs of insertion sequences IS1, IS3 and IS30 from natural strains of Escherichia coli and related enteric bacteria. The nucleotide sequences within each class of IS were highly conserved among E. coli strains, over 99.7% similar to a consensus sequence. When compared to the range of nucleotide divergence among chromosomal genes, these data indicate high turnover and rapid movement of the transposons among clonal lineages of E. coli. In addition, length polymorphism among IS appears to be far less frequent than in eukaryotic transposons, indicating that nonfunctional elements comprise a smaller fraction of bacterial transposon populations than found in eukaryotes. IS present in other species of enteric bacteria are substantially divergent from E. coli elements, indicating that IS are mobilized among bacterial species at a reduced rate. However, homologs of IS1 and IS3 from diverse species provide evidence that recombination events and horizontal transfer of IS among species have both played major roles in the evolution of these elements. IS3 elements from E. coli and Shigella show multiple, nested, intragenic recombinations with a distantly related transposon, and IS1 homologs from diverse taxa reveal a mosaic structure indicative of multiple recombination and horizontal transfer events.

Large inversion in Escherichia coli K-12 1485IN between inversely oriented IS3 elements near lac and cdd

A companion study has shown that the inversion carried by strain 1485IN has one terminus between lac and proC and the other between his and cdd of the normal strain. Starting with this mapping data, we have done molecular work demonstrating that the inversion occurred by recombination between inversely oriented two IS3 elements, one present near lac and the other near the cdd locus; i.e., the inversion is IN(is3B-is3E). Evidence supporting this conclusion includes: (i) Normal and inversion strains share two short regions with identical restriction maps. One of these regions is near lac and the other near cdd. (ii) IS3 homology was detected in each of the terminus regions of both the normal and inversion strains. (iii) The sequence on one side of the original IS3 element near lac has been exchanged with the sequence on one side of the IS3 near cdd. Whether the inversion has occurred by one event of homologous recombination between the two IS3 elements or has been caused by involvement of IS3 elements on an F factor is discussed. Another rearrangement, probably related to inversion and deletion, was detected between the IS3 and cdd of the inversion strain.

Translation initiation of IS50R read-through transcripts

IS50R (and Tn5) normally transposes at a low frequency, partly because cells containing this insertion sequence synthesize low levels of the transposase protein. Since the 5' end of the transposase gene is located next to the outer end of IS50R (and thus close to flanking host sequences), transposition into actively transcribed genes could result in the production of read-through transcripts that would encode the transposase. We have found that these read-through transcripts are made, but are translated poorly. We isolated mutations that increase translation initiation of transposase from read-through transcripts. Most of these mutations destabilize a potential RNA secondary structure in the ribosome binding site that could form in read-through transcripts, but not in normal transcripts. In vitro RNA secondary structure analysis has confirmed the predicted RNA secondary structure and the effects of mutations. We have shown that RNA secondary structure is the major factor limiting transposase expression from read-through transcripts.

IS406 and IS407, two gene-activating insertion sequences for Pseudomonas cepacia

We have determined the nucleotide sequences of IS406 (1368 bp) and IS407 (1236 bp), two insertion sequence (IS) elements isolated from Pseudomonas cepacia 249 on the basis of their abilities to activate the expression of the lac genes of Tn951. IS406 and IS407 when inserted into the lac promoter/operator region of Tn951 generated, respectively, duplications of 8 and 4 bp of target DNA. IS406 had 41-bp terminal inverted repeat (IR) sequences with eleven mismatches. IR-L (left) contained a 12-bp motif present at the ends of Tn2501. In other respects, IS406 was distinct from previously described bacterial IS elements listed in the GenBank and EMBL databases. IS407 had 49-bp terminal IRs with 18 mismatches. IR-R (right) contained an outwardly directed sigma 70-like promoter. IS407 was closely related to IS476 and ISR1 from Xanthomonas and Rhizobium sp., respectively.

Factors determining the frequency of plasmid cointegrate formation mediated by insertion sequence IS3 from Escherichia coli

Transposition events mediated by plasmidborne copies of the insertion sequence IS3 of Escherichia coli are difficult to detect because of a low frequency of cointegrate formation. We found that cointegration activity could be strongly enhanced by using plasmid constructions in which a second IS3 element, disabled by a large deletion, was placed adjacent to an intact IS3 copy. Attempts to construct plasmids containing two adjacent intact IS3 copies were unsuccessful, probably because of instability. Transpositional hyperactivity of tandemly duplicated IS sequences was previously described for spontaneous duplications of IS21 and IS30 and may well be a more general phenomenon. The frequency of cointegration events was also strongly increased in an E. coli strain deficient in Dam methylation, suggesting that IS3, like some other Dam site-containing IS elements, is regulated by the Dam methylation system. Insertion sites were strongly clustered within the target lambda repressor gene: however no sequence specificity determinants could be identified. All insertions analyzed carried the IS element in the same orientation; target sequence duplications were mostly 3 bp, but in some cases 4 bp long. To obtain information about the roles of the open reading frames (ORFs) in IS3, we constructed plasmid-borne mutant elements in which potentially functional reading frames were inactivated by site-directed mutations; the mutants were introduced into partial tandem constructions and tested in cointegration assays. Mutations inactivating the putative initiation condons of ORF I and II in the intact element reduced insertion activity to less than 4% of the wild type, whereas the introduction of a termination codon into ORF IV had no effect on cointegration frequency.(ABSTRACT TRUNCATED AT 250 WORDS)

Identification, DNA sequence, and distribution of IS981, a new, high-copy-number insertion sequence in lactococci

An insertion in the lactococcal plasmid pGBK17, which inactivated the gene(s) encoding resistance to the prolate-headed phage c2, was cloned, sequenced, and identified as a new lactococcal insertion sequence (IS). IS981 was 1,222 bp in size and contained two open reading frames, one large enough to encode a transposase. IS981 ended in imperfect inverted repeats of 26 of 40 bp and generated a 5-bp direct repeat of target DNA at the site of insertion. IS981 was present on the chromosome of Lactococcus lactis subsp. lactis LM0230 from where it transposed to pGBK17 during transformation. Twenty-three strains of lactococci examined for the presence of IS981 by Southern hybridization showed 4 to 26 copies per genome, with L. lactis subsp. cremoris strains containing the highest number of copies. Comparison of the DNA sequence and the amino acid sequence of the long open reading frame to other known sequences showed that IS981 is related to a family of IS elements that includes IS2, IS3, IS51, IS150, IS600, IS629, IS861, IS904, and ISL1.

Nucleotide sequence analysis of the inversion termini located within IS3 elements alpha 3 beta 3 and beta 5 alpha 5 of Escherichia coli K-12

This paper presents the first detailed structural analysis of termini of an inversion mediated by recombination between Escherichia coli native IS elements. The complete nucleotide sequence of the inversion termini in the lactose region of Escherichia coli K-12 confirms our previous suggestion that the inversion occurred by homologous recombination between alpha 3 beta 3 and beta 5 alpha 5 IS3 elements (D. J. Savic, J. Bacteriol. 140:311-319, 1979; D. J. Savic, S. Romac, and S. D. Ehrlich, J. Bacteriol. 155:943-946, 1983). The data show a slight structural divergence of alpha 3 beta 3 and beta 5 alpha 5 elements, but they do not reveal new sequences within recombined IS3 elements that could influence the expression of nearby genes.

Characterization of a Mycobacterium tuberculosis insertion sequence, IS6110, and its application in diagnosis

An insertion sequence-like element, IS6110, was isolated from a Mycobacterium tuberculosis cosmid library as a repetitive sequence. IS6110 shows similarities with elements of the IS3 family. This insertion sequence was found to be specific to mycobacteria belonging to the M. tuberculosis complex. For detection and identification of M. tuberculosis bacilli in uncultured specimens, oligonucleotides derived from the IS6110 sequence were used as primers and probes in polymerase chain reaction studies. The results obtained were consistent with results of classical identification procedures, bacteriological data, and clinical criteria.

Identification of an insertion-sequence-like genetic element in the newly recognized human pathogen Mycoplasma incognitus

Cloned 2.2-kb DNA (plasmid psb-2.2) of Mycoplasma incognitus, a pathogen in AIDS and non-AIDS patients [Lo et al., Am. J. Trop. Med. Hyg. 41 (1989) 364-376; 601-616], contains a 1405-bp genetic element closely resembling bacterial insertion sequence (IS) elements. This IS-like element has 29-bp terminal inverted repeats with seven mismatches, is immediately flanked by 3-bp direct repeats, and has typical stem-and-loop structures at or near both the termini. Two potential open reading frames (ORF-1 and ORF-2) encode 143 amino acids (aa) and 103 aa, respectively, in this IS-like element. Part (57 aa) of the deduced aa sequence of ORF-2 has a significant homology (43%) with the putative transposase of Escherichia coli IS3. In this study, a series of synthetic oligodeoxyribonucleotides each containing a specific sequence of a selected segment in psb-2.2, have been used as probes which reveal that the IS-like element occurs more than ten times in the genome of M. incognitus. This potentially transposable element has many characteristic features in common with bacterial IS elements.

Characterization of a Mycobacterium tuberculosis insertion sequence belonging to the IS3 family

A repetitive element (IS986), previously isolated from Mycobacterium tuberculosis and shown to detect multiple restriction fragment-length polymorphisms (RFLPs), has been sequenced. It consists of a potential insertion sequence of 1358bp, with 30-bp inverted repeat ends. IS986 has four potentially significant open reading frames (ORFs): ORFa1, ORFa2 and ORFb on one strand and ORFc on the complementary strand. The sequences of the potential translated products identify IS986 as a member of the IS3 family, with an apparent frameshift between ORFa1 and ORFa2. IS986 has potential as a highly specific probe for detection and typing of M. tuberculosis, as well as for transposon mutagenesis of mycobacteria. The sequence of IS986 is virtually identical to that of another recently described element, IS6110 (Thierry et al., 1990).