IS150: distribution, nucleotide sequence and phylogenetic relationships of a new E. coli insertion element

Promoter recruitment drives the emergence of proto-genes in a long-term evolution experiment with Escherichia coli

The phenomenon of de novo gene birth-the emergence of genes from non-genic sequences-has received considerable attention due to the widespread occurrence of genes that are unique to particular species or genomes. Most instances of de novo gene birth have been recognized through comparative analyses of genome sequences in eukaryotes, despite the abundance of novel, lineage-specific genes in bacteria and the relative ease with which bacteria can be studied in an experimental context. Here, we explore the genetic record of the Escherichia coli long-term evolution experiment (LTEE) for changes indicative of "proto-genic" phases of new gene birth in which non-genic sequences evolve stable transcription and/or translation. Over the time span of the LTEE, non-genic regions are frequently transcribed, translated and differentially expressed, with levels of transcription across low-expressed regions increasing in later generations of the experiment. Proto-genes formed downstream of new mutations result either from insertion element activity or chromosomal translocations that fused preexisting regulatory sequences to regions that were not expressed in the LTEE ancestor. Additionally, we identified instances of proto-gene emergence in which a previously unexpressed sequence was transcribed after formation of an upstream promoter, although such cases were rare compared to those caused by recruitment of preexisting promoters. Tracing the origin of the causative mutations, we discovered that most occurred early in the history of the LTEE, often within the first 20,000 generations, and became fixed soon after emergence. Our findings show that proto-genes emerge frequently within evolving populations, can persist stably, and can serve as potential substrates for new gene formation.

Promoter capture drives the emergence of proto-genes in Escherichia coli

The phenomenon of de novo gene birth-the emergence of genes from non-genic sequences-has received considerable attention due to the widespread occurrence of genes that are unique to particular species or genomes. Most instances of de novo gene birth have been recognized through comparative analyses of genome sequences in eukaryotes, despite the abundance of novel, lineage-specific genes in bacteria and the relative ease with which bacteria can be studied in an experimental context. Here, we explore the genetic record of the Escherichia coli Long-Term Evolution Experiment (LTEE) for changes indicative of "proto-genic" phases of new gene birth in which non-genic sequences evolve stable transcription and/or translation. Over the time-span of the LTEE, non-genic regions are frequently transcribed, translated and differentially expressed, thereby serving as raw material for new gene emergence. Most proto-genes result either from insertion element activity or chromosomal translocations that fused pre-existing regulatory sequences to regions that were not expressed in the LTEE ancestor. Additionally, we identified instances of proto-gene emergence in which a previously unexpressed sequence was transcribed after formation of an upstream promoter. Tracing the origin of the causative mutations, we discovered that most occurred early in the history of the LTEE, often within the first 20,000 generations, and became fixed soon after emergence. Our findings show that proto-genes emerge frequently within evolving populations, persist stably, and can serve as potential substrates for new gene formation.

CRISPR-interference-based modulation of mobile genetic elements in bacteria

Spontaneous mutagenesis of synthetic genetic constructs by mobile genetic elements frequently results in the rapid loss of engineered functions. Previous efforts to minimize such mutations required the exceedingly time-consuming manipulation of bacterial chromosomes and the complete removal of insertional sequences (ISes). To this aim, we developed a single plasmid-based system (pCRIS) that applies CRISPR-interference to inhibit the transposition of bacterial ISes. pCRIS expresses multiple guide RNAs to direct inactivated Cas9 (dCas9) to simultaneously silence IS1, IS3, IS5 and IS150 at up to 38 chromosomal loci in Escherichia coli, in vivo. As a result, the transposition rate of all four targeted ISes dropped to negligible levels at both chromosomal and episomal targets. Most notably, pCRIS, while requiring only a single plasmid delivery performed within a single day, provided a reduction of IS-mobility comparable to that seen in genome-scale chromosome engineering projects. The fitness cost of multiple IS-knockdown, detectable in flask-and-shaker systems was readily outweighed by the less frequent inactivation of the transgene, as observed in green fluorescent protein (GFP)-overexpression experiments. In addition, global transcriptomics analysis revealed only minute alterations in the expression of untargeted genes. Finally, the transposition-silencing effect of pCRIS was easily transferable across multiple E. coli strains. The plasticity and robustness of our IS-silencing system make it a promising tool to stabilize bacterial genomes for synthetic biology and industrial biotechnology applications.

A new subgroup of the IS3 family and properties of its representative member ISPpy1

Recently, we described a novel insertion element, ISPpy1, isolated from a permafrost strain of Psychrobacter maritimus. In this work, we demonstrated that ISPpy1 is a member of a novel subgroup of the IS3 family of insertion sequences (ISs) that was not identified and characterized previously. IS elements of this subgroup termed the ISPpy1 subgroup are broadly distributed among different taxa of Eubacteria, including Geobacteraceae, Chlorobiaceae, Desulfobacteraceae, Methylobacteriaceae, Nitrosomonadaceae and Cyanobacteria. While displaying characteristic features of the IS3-family elements, ISPpy1 subgroup elements exhibit some unusual features. In particular, most of them have longer terminal repeats with unconventional ends and frameshifting box with an atypical organization, and, unlike many other IS3-family elements, do not exhibit any distinct IS specificity. We studied the transposition and mutagenic properties of a representative member of this subgroup, ISPpy1 and showed that in contrast to the original P. maritimus host, in a heterologous host, Escherichia coli K-12, it is able to translocate with extremely high efficiency into the chromosome, either by itself or as a part of a composite transposon containing two ISPpy1 copies. The majority of transposants carry multiple chromosomal copies (up to 12) of ISPpy1. It was discovered that ISPpy1 is characterized by a marked mutagenic activity in E. coli: its chromosomal insertions generate various types of mutations, including auxotrophic, pleiotropic and rifampicin-resistance mutations. The distribution of IS elements of the novel subgroup among different bacteria, their role in the formation of composite transposons and the horizontal transfer of genes are examined and discussed.

A novel insertion sequence transposed to thermophilic bacteriophage {phi}IN93

The nucleotide sequence of IStaqTZ2 are available in the DDBJ/EMBL/GenBank databases under the accession number AB063392. A novel insertion sequence (IStaqTZ2) was transposed from the genome of Thermus thermophilus TZ2 to that of the thermophilic bacteriophage IN93. The complete nucleotide sequence of IStaqTZ2 was determined and was found to be 1,258 bp in length and to contain an open reading frame (ORF1179), which is predicted to encode a transposase. IStaqTZ2 was also found to contain two terminal inverted repeats with 48 and 52 bp, respectively. Based on homology analysis, IStaqTZ2 was classified as a member of the IS256 family.

Transposition of a bacterial insertion sequence in chloroplasts

Bacterial transposable elements (IS elements, transposons) represent an important determinant of genome structure and dynamics, and are a major force driving genome evolution. Here, we have tested whether bacterial insertion sequences (IS elements) can transpose in a prokaryotic compartment of the plant cell, the plastid (chloroplast). Using plastid transformation, we have integrated different versions of the Escherichia coli IS element IS150 into the plastid genome of tobacco (Nicotiana tabacum) plants. We show that IS150 is faithfully mobilized inside the chloroplast, and that enormous quantities of transposition intermediates accumulate. As synthesis of the IS150 transposase is dependent upon programmed ribosomal frame shifting, our data indicate that this process also occurs in chloroplasts. Interestingly, all insertion events detected affect a single site in the plastid genome, suggesting that the integration of IS150 is highly sequence dependent. In contrast, the initiation of the transposition process was found to be independent of the sequence context. Finally, our data also demonstrate that plastids lack the capacity to repair double-strand breaks in their genomes by non-homologous end joining, a finding that has important implications for genome stability, and which may explain the peculiar immunity of the plastid to invading promiscuous DNA sequences of nuclear and mitochondrial origin.

Genetic basis of evolutionary adaptation by Escherichia coli to stressful cycles of freezing, thawing and growth

Microbial evolution experiments offer a powerful approach for coupling changes in complex phenotypes, including fitness and its components, with specific mutations. Here we investigate mutations substituted in 15 lines of Escherichia coli that evolved for 1000 generations under freeze-thaw-growth (FTG) conditions. To investigate the genetic basis of their improvements, we screened many of the lines for mutations involving insertion sequence (IS) elements and identified two genes where multiple lines had similar mutations. Three lines had IS150 insertions in cls, which encodes cardiolipin synthase, and 8 lines had IS150 insertions in the uspA-uspB intergenic region, encoding two universal stress proteins. Another line had an 11-bp deletion mutation in the cls gene. Strain reconstructions and competitions demonstrated that this deletion is beneficial under the FTG regime in its evolved genetic background. Further experiments showed that this cls mutation helps maintain membrane fluidity after freezing and thawing and improves freeze-thaw (FT) survival. Reconstruction of isogenic strains also showed that the IS150 insertions in uspA/B are beneficial under the FTG regime. The evolved insertions reduce uspB transcription and increase both FT survival and recovery, but the physiological mechanism for this fitness improvement remains unknown.

CooB is required for assembly but not transport of CS1 pilin

CS1 pili are filamentous proteinaceous appendages found on many enterotoxigenic Escherichia coli (ETEC) strains isolated from human diarrhoeal disease. They are thought to effect colonization of the upper intestine by facilitating binding to human ileal epithelial cells. We have identified a gene, cooB, which lies directly upstream of cooA, the gene that encodes the major structural CS1 protein. When translated in vitro, the protein product of cooB migrates in sodium dodecyl sulphate/polyacrylamide gel with an apparent molecular mass of 26 kDa, which is consistent with that predicted from its DNA sequence. We constructed a mutant allele (cooB-1) by insertion of the omega fragment, which inhibits transcription and translation, into the cooB gene in vitro. In a derivative of an ETEC strain with the cooB-1 mutation (JEF100) and a plasmid that encodes Rns (pEU2030), the positive regulator required for CS1 expression, no cooB and a greatly reduced level of cooA product was detectable in total cell extracts. The reduction of cooA in this strain appears to result from polarity of the cooB mutation because introduction of the wild-type cooA gene in trans causes production of CooA protein, which is found in cell pellet extracts, in extracts containing only surface proteins and in the culture supernatant. Therefore, in the absence of CooB, CooA is stable and it is transported through both inner and outer membranes. However, the cooB-1 strain with cooA in trans does not cause haemagglutination of bovine erythrocytes (the model system used to assay adherence mediated by coli surface antigen 1 (CS1) pili).(ABSTRACT TRUNCATED AT 250 WORDS)

Bacterial repetitive extragenic palindromic sequences are DNA targets for Insertion Sequence elements

Background

Mobile elements are involved in genomic rearrangements and virulence acquisition, and hence, are important elements in bacterial genome evolution. The insertion of some specific Insertion Sequences had been associated with repetitive extragenic palindromic (REP) elements. Considering that there are a sufficient number of available genomes with described REPs, and exploiting the advantage of the traceability of transposition events in genomes, we decided to exhaustively analyze the relationship between REP sequences and mobile elements.

Results

This global multigenome study highlights the importance of repetitive extragenic palindromic elements as target sequences for transposases. The study is based on the analysis of the DNA regions surrounding the 981 instances of Insertion Sequence elements with respect to the positioning of REP sequences in the 19 available annotated microbial genomes corresponding to species of bacteria with reported REP sequences. This analysis has allowed the detection of the specific insertion into REP sequences for ISPsy8 in Pseudomonas syringae DC3000, ISPa11 in P. aeruginosa PA01, ISPpu9 and ISPpu10 in P. putida KT2440, and ISRm22 and ISRm19 in Sinorhizobium meliloti 1021 genome. Preference for insertion in extragenic spaces with REP sequences has also been detected for ISPsy7 in P. syringae DC3000, ISRm5 in S. meliloti and ISNm1106 in Neisseria meningitidis MC58 and Z2491 genomes. Probably, the association with REP elements that we have detected analyzing genomes is only the tip of the iceberg, and this association could be even more frequent in natural isolates.

Conclusion

Our findings characterize REP elements as hot spots for transposition and reinforce the relationship between REP sequences and genomic plasticity mediated by mobile elements. In addition, this study defines a subset of REP-recognizer transposases with high target selectivity that can be useful in the development of new tools for genome manipulation.

Horizontal transfer of CS1 pilin genes of enterotoxigenic Escherichia coli

CS1 is one of a limited number of serologically distinct pili found in enterotoxigenic Escherichia coli (ETEC) strains associated with disease in people. The genes for the CS1 pilus are on a large plasmid, pCoo. We show that pCoo is not self-transmissible, although our sequence determination for part of pCoo shows regions almost identical to those in the conjugative drug resistance plasmid R64. When we introduced R64 into a strain containing pCoo, we found that pCoo was transferred to a recipient strain in mating. Most of the transconjugant pCoo plasmids result from recombination with R64, leading to acquisition of functional copies of all of the R64 transfer genes. Temporary coresidence of the drug resistance plasmid R64 with pCoo leads to a permanent change in pCoo so that it is now self-transmissible. We conclude that when R64-like plasmids are transmitted to an ETEC strain containing pCoo, their recombination may allow for spread of the pCoo plasmid to other enteric bacteria.

Escherichia coli insertion sequence IS150: transposition via circular and linear intermediates

IS150, a member of the widespread IS3 family, contains two consecutive out-of-phase open reading frames, orfA and orfB, that partially overlap. These open reading frames encode three proteins, InsA, InsB, and the InsAB protein, which is jointly encoded by both open reading frames by means of programmed translational frameshifting. We demonstrate that the InsAB protein represents the IS150 element's transposase. In vivo, the wild-type IS150 element generates circular excision products and linear IS150 molecules. Circular and linear species have previously been detected with mutant derivatives of other members of the IS3 family. Our finding supports the assumption that these products represent true transposition intermediates of members of this family. Analysis of the molecular nature of these two species suggested that the circular forms are precursors of the linear molecules. Elimination of InsA synthesis within the otherwise intact element led to accumulation of large amounts of the linear species, indicating that the primary role of InsA may be to prevent abortive production of the linear species and to couple generation of these species to productive insertion events.

IS1550 from Mycoplasma fermentans is transposable in Escherichia coli

An insertion sequence (IS)-like element (ISMil) was previously isolated from the incognitus strain of Mycoplasma fermentans. With polymerase chain reaction primers corresponding to the left and right terminal inverted repeats of ISMil, a 1.4-kb DNA fragment was amplified from the genome of the M64 strain of M. fermentans. This DNA fragment has structural characteristics similar to those of ISMil and is designated IS1550. One copy of IS1550 encoded two considerable overlapping open reading frames (ORFs), ORF1 and ORF2. A putative translation frame-shift signal AAAAAAG (A6G) was located near the 3'-end of ORF1. This signal might cause a -1 frame-shift to form a fused product of ORF1 and ORF2 with 444 amino acids, which has a significant similarity to the putative transposase of the IS3 family. This copy of IS1550 was shown to be transposable in Escherichia coli ISM612. Its transposition caused a 1465-bp deletion immediately adjacent to the 3'-end of the element and the creation of a pair of 3-bp direct repeats flanking the element at the new insertion site. On the basis of these results, IS1550 was considered a typical transposable element.

A novel IS-like element frequently inserted in a putative virulence regulator in bovine mastitis isolates of Streptococcus dysgalactiae

Streptococcus dysgalactiae, a Lancefield group C streptococcus, is commonly isolated from bovine mastitis. We recently identified a putative regulon in two S. dysgalactiae strains, 8215 and Epi9, consisting of two consecutive genes, dmg and dem, coding for a possible regulatory protein and an M-like protein with fibrinogen- and IgG-binding-properties, respectively. During these studies a short sequence homologous to an IS element was found to be inserted in the dmg gene of strain 8215. The present investigation describes the complete sequence of this IS-like element, named ISSdy1, which consists of 1218 bp and contains two ORFs, flanked by imperfect repeats. The nucleotide sequence of the IS-like element shows 82% identity to the previously reported sequence of IS199 from Streptococcus mutans V403. The deduced amino acid sequences of the ORFs also revealed high homology to transposases from IS elements in Enterococcus faecium, Escherichia coli, and Shigella dysenteriae, all belonging to the IS3 family. We studied the distribution of ISSdy1 in 57 S. dysgalactiae isolates using PCR analysis with specific primers derived from the IS element. Ninety-eight percent of the isolates contained the ISSdy1 element. Surprisingly, in the majority of studied strains a copy of the IS-like element was found to be inserted in the dmg gene, a putative virulence regulator.

Reactivation of insertionally inactivated Shiga toxin 2 genes of Escherichia coli O157:H7 caused by nonreplicative transposition of the insertion sequence

IS1203v is an insertion sequence which has been found in inactivated Shiga toxin 2 genes of Escherichia coli O157:H7. We analyzed the transpositional mechanism of IS1203v in order to investigate whether the Shiga toxin 2 genes inactivated by IS1203v could revert to the wild type. When the transposase activity of IS1203v was enhanced by artificial frameshifting, IS1203v was obviously excised from the Shiga toxin 2 gene in a circular form. The IS1203v circle consisted of the entire IS1203v, but an extra 3-bp sequence (ATC) intervened between the 5' and 3' ends of IS1203v. The extra 3-bp sequence was identical to a direct repeat which was probably generated upon insertion. Moreover, we detected the Shiga toxin 2 gene with a precise excision of IS1203v. In the wild-type situation, the transposition products of IS1203v could be observed by PCR amplification. These results show that IS1203v can transpose in a nonreplicative manner and that the Shiga toxin gene inactivated by this insertion sequence can revert to the wild type.

Direct selection of IS903 transposon insertions by use of a broad-host-range vector: isolation of catalase-deficient mutants of Actinobacillus actinomycetemcomitans

Transposon mutagenesis in bacteria generally requires efficient delivery of a transposon suicide vector to allow the selection of relatively infrequent transposition events. We have developed an IS903-based transposon mutagenesis system for diverse gram-negative bacteria that is not limited by transfer efficiency. The transposon, IS903phikan, carries a cryptic kan gene, which can be expressed only after successful transposition. This allows the stable introduction of the transposon delivery vector into the host. Generation of insertion mutants is then limited only by the frequency of transposition. IS903phikan was placed on an IncQ plasmid vector with the transposase gene located outside the transposon and expressed from isopropyl-beta-D-thiogalactopyranoside (IPTG)-inducible promoters. After transposase induction, IS903phikan insertion mutants were readily selected in Escherichia coli by their resistance to kanamycin. We used IS903phikan to isolate three catalase-deficient mutants of the periodontal pathogen Actinobacillus actinomycetemcomitans from a library of random insertions. The mutants display increased sensitivity to hydrogen peroxide, and all have IS903phikan insertions within an open reading frame whose predicted product is closely related to other bacterial catalases. Nucleotide sequence analysis of the catalase gene (designated katA) and flanking intergenic regions also revealed several occurrences of an 11-bp sequence that is closely related to the core DNA uptake signal sequence for natural transformation of Haemophilus influenzae. Our results demonstrate the utility of the IS903phikan mutagenesis system for the study of A. actinomycetemcomitans. Because IS903phikan is carried on a mobilizable, broad-host-range IncQ plasmid, this system is potentially useful in a variety of bacterial species.

A three-way junction and constituent stem-loops as the stimulator for programmed -1 frameshifting in bacterial insertion sequence IS911

Several signals are required for the programmed frameshifting in translation of IS911 mRNA. These include a Shine Dalgarno (SD)-like sequence, a slippery sequence of six adenine residues and a guanine residue (A6G) and a 3' secondary structure. The structure of the mRNA containing these elements was investigated using chemical and enzymatic probing. The probing data show that the 3' structure is a three-way junction of stems. The function of the three-way junction was investigated by mutagenesis. Disrupting the stability of the structure greatly affects frameshifting and transposition levels as tested by separate in vivo assays. Structural probing and thermal melting profiles indicate that the disrupted three-way junctions have altered structures.

Characterization of insertions of IS476 and two newly identified insertion sequences, IS1478 and IS1479, in Xanthomonas campestris pv. campestris

Thirty-two plasmid insertion mutants were independently isolated from two strains of Xanthomonas campestris pv. campestris in Taiwan. Of the 32 mutants, 14 (44%), 8 (25%), and 4 (12%) mutants resulted from separate insertions of an IS3 family member, IS476, and two new insertion sequences (IS), IS1478 and IS1479. While IS1478 does not have significant sequence homology with any IS elements in the EMBL/GenBank/DDBJ database, IS1479 demonstrated 73% sequence homology with IS1051 in X. campestris pv. dieffenbachiae, 62% homology with IS52 in Pseudomonas syringae pv. glycinea, and 60% homology with IS5 in Escherichia coli. Based on the predicted transposase sequences as well as the terminal nucleotide sequences, IS1478 by itself constitutes a new subfamily of the widespread IS5 family, whereas IS1479, along with IS1051, IS52, and IS5, belongs to the IS5 subfamily of the IS5 family. All but one of the IS476 insertions had duplications of 4 bp at the target sites without sequence preference and were randomly distributed. An IS476 insertion carried a duplication of 952 bp at the target site. A model for generating these long direct repeats is proposed. Insertions of IS1478 and IS1479, on the other hand, were not random, and IS1478 and IS1479 each showed conservation of PyPuNTTA and PyTAPu sequences (Py is a pyrimidine, Pu is a purine, and N is any nucleotide) for duplications at the target sites. The results of Southern blot hybridization analysis indicated that multiple copies of IS476, IS1478, and IS1479 are present in the genomes of all seven X. campestris pv. campestris strains tested and several X. campestris pathovars.

Insertion sequences

Insertion sequences (ISs) constitute an important component of most bacterial genomes. Over 500 individual ISs have been described in the literature to date, and many more are being discovered in the ongoing prokaryotic and eukaryotic genome-sequencing projects. The last 10 years have also seen some striking advances in our understanding of the transposition process itself. Not least of these has been the development of various in vitro transposition systems for both prokaryotic and eukaryotic elements and, for several of these, a detailed understanding of the transposition process at the chemical level. This review presents a general overview of the organization and function of insertion sequences of eubacterial, archaebacterial, and eukaryotic origins with particular emphasis on bacterial elements and on different aspects of the transposition mechanism. It also attempts to provide a framework for classification of these elements by assigning them to various families or groups. A total of 443 members of the collection have been grouped in 17 families based on combinations of the following criteria: (i) similarities in genetic organization (arrangement of open reading frames); (ii) marked identities or similarities in the enzymes which mediate the transposition reactions, the recombinases/transposases (Tpases); (iii) similar features of their ends (terminal IRs); and (iv) fate of the nucleotide sequence of their target sites (generation of a direct target duplication of determined length). A brief description of the mechanism(s) involved in the mobility of individual ISs in each family and of the structure-function relationships of the individual Tpases is included where available.

Negative regulation of IS2 transposition by the cyclic AMP (cAMP)-cAMP receptor protein complex

Three sequences similar to that of the consensus binding sequence of the cyclic AMP (cAMP)-cAMP receptor protein (CRP) complex were found in the major IS2 promoter region. Experiments were performed to determine whether the cAMP-CRP complex plays a role in the regulation of IS2 transposition. In the gel retardation assay, the cAMP-CRP complex was found to be able to bind the major IS2 promoter. A DNA footprinting assay confirmed that the cAMP-CRP complex binds to the sequences mentioned above. With an IS2 promoter-luciferase gene fusion construct, the cAMP-CRP complex was shown to inhibit transcription from the major IS2 promoter. IS2 was found to transpose at a frequency approximately 200-fold higher in an Escherichia coli host defective for CRP or adenyl cyclase than in a wild-type host. These results suggest that the cAMP-CRP complex is a negative regulator of IS2 transposition.

ISD1, an insertion element from the sulfate-reducing bacterium Desulfovibrio vulgaris Hildenborough: structure, transposition, and distribution

Insertion element ISD1, discovered when its transposition caused the insertional inactivation of an introduced sacB gene, is present in two copies in the genome of Desulfovibrio vulgaris Hildenborough. Southern blot analysis indicated at least two insertion sites in the sacB gene. Cloning and sequencing of a transposed copy of ISD1 indicated a length of 1,200 bp with a pair of 44-bp imperfect inverted repeats at the ends, flanked by a direct repeat of the 4-bp target sequence. AAGG and AATT were found to function as target sequences. ISD1 encodes a transposase from two overlapping open reading frames by programmed translational frameshifting at an A6G shifty codon motif. Sequence comparison showed that ISD1 belongs to the IS3 family. Isolation and analysis of the chromosomal copies, ISD1-A and ISD1-B, by PCR and sequencing indicated that these are not flanked by direct repeats. ISD1-A is inserted in a region of the chromosome containing the gapdh-pgk genes (encoding glyceraldehyde-3-phosphate dehydrogenase and phosphoglycerate kinase). Active transposition to other loci in the genome was demonstrated, offering the potential of a new tool for gene cloning and mutagenesis. ISD1 is the first transposable element described for the sulfate reducers, a large and environmentally important group of bacteria. The distribution of ISD1 in genomes of sulfate-reducing bacteria is limited. A single copy is present in the genome of D. desulfuricans Norway.

Assembly of a strong promoter following IS911 circularization and the role of circles in transposition

When supplied with high levels of the IS911-encoded transposase, IS911-based transposons can excise as circles in which the right and left terminal inverted repeats are abutted. Formation of the circle junction is shown here to create a promoter, p(junc), which is significantly stronger than the indigenous promoter, pIRL, and is also capable of driving expression of the IS911 transposition proteins. High transposase expression from the circular transposon may promote use of the circle as an integration substrate. The results demonstrate that IS911 circles are highly efficient substrates for insertion into a target molecule in vivo. Insertion leads to the disassembly of p(junc) and thus to a lower level of synthesis of the transposition proteins. The observation that normal levels of IS911 transposition proteins supplied by wild-type copies of IS911 are also capable of generating transposon circles, albeit at a low level, reinforces the idea that the transposon circles might form part of the natural transposition cycle of IS911. These observations form the elements of a feedback control mechanism and have been incorporated into a model describing one possible pathway of IS911 transposition.

Characterization of a large chromosomal "high-pathogenicity island" in biotype 1B Yersinia enterocolitica

Pathogenic Yersinia spp. can be subdivided into highly pathogenic (high-pathogenicity) and low-pathogenicity strains. Several genes specific for the high-pathogenicity strains are clustered on a chromosomal fragment designated a "high-pathogenicity island" (HPI). In the present work, the HPI of biotype 1B strain Ye 8081 of Y. enterocolitica was characterized. We demonstrate important differences from the HPI of Y. pestis. The HPI of Y. enterocolitica is smaller (45 kb) and is not flanked by insertion sequences. A copy of the gene coding for the tRNA-Asn is present at one extremity of the HPI and may, as in uropathogenic Escherichia coli, participate in the excision of the island. In addition to the genes encoding the yersiniabactin-pesticin receptor and the high-molecular-weight protein 2, four repeated sequences are present on the HPI of Y. enterocolitica. At least two of them are insertion elements: previously described IS1328 and newly characterized IS1400. Comparison of the HPI of strain Ye 8081 with that of other Y. enterocolitica strains of biotype 1B indicates that most of the island is conserved, apart from 15 kb at the left-hand end which is variable, especially in the region where three repeated sequences are clustered.

The use of an improved transposon mutagenesis system for DNA sequencing leads to the characterization of a new insertion sequence of Streptomyces lividans 66

A DNA sequencing strategy was developed based on the tetracycline resistance transposon Tn1721. A universal M13 primer binding site (UP) for DNA sequencing and restriction sites for mapping were inserted near one end of Tn1721 and the new derivative, Tn5491, introduced onto a conjugative F' plasmid. The target sequence is inserted between two inverted resolution sites (res) of Tn1721 present on the high-copy plasmid pJOE2114. Due to the inviability of long palindromic sequences in Escherichia coli insertions between the inversely orientated res sites of pJOE2114 are positively selected. Transposition of Tn5491 into the target sequence is selected by cointegrate formation of Tn5491 during transposition, mating and transfer of the nonconjugative sequencing vector. After cointegrate resolution, the additional res sites in the vector result in a second site-specific recombination removing most of the transposon (except of 136 bp) and part of the target sequence. The reduced plasmid sizes and the use of the universal primer improved the quality of the sequencing results obtained on an automated fluorescent sequencer. A 3.35-kb EcoRI fragment from the 30-kb terminal inverted repeats (TIR) of the Streptomyces lividans chromosome was sequenced by this method. A 1304-bp sequence was found on this fragment with the features of insertion elements. The element called IS1372 had 27-bp IR and two potential open reading frames. The predicted gene products had similar sizes and high similarity to gene products encoded by insertion sequences of the IS3 family. Furthermore, a potential signal stimulating ribosomal shifts and typical for members of the IS3 family was identified. Five to seven copies of IS1372 were found in different strains of S. lividans but none in other Streptomyces species tested.

Relationships between transposable elements based upon the integrase-transposase domains: is there a common ancestor?

The integrase domain of RNA-mediated elements (class I) and the transposase domain of DNA-mediated transposable elements (class II) were compared. A number of elements contain the DDE signature, which plays an important role in their integration. The possible relationships between mariner-Tc1 and IS elements, retrotransposons, and retroviruses were analyzed from an alignment of this region. The mariner-Tc1 superfamily, and LTR retrotransposons and retroviruses were found to be monophyletic groups. However, the IS elements of bacteria were found in several groups. These results were used to propose an evolutionary history that suggests a common ancestor for some integrases and transposases.

Identification and characterization of the linear IS3 molecules generated by staggered breaks

Insertion sequences IS3 encodes two, out-of-phase, overlapping open reading frames, orfA and orfB. The OrfAB transframe protein that is IS3 transposase is produced by -1 translational frameshifting between orfA and orfB. Efficient production of the IS3 transposase in the cells harboring the IS3-carrying plasmid has been shown to generate miniplasmids as well as characteristic minicircles, called IS3 circles, consisting of the entire IS3 sequence and one of the 3-base pair sequences flanking IS3 in the parental plasmid. Here, we show that the IS3 transposase also generates the linear molecules of IS3 with 3-nucleotide overhangs at the 5'-ends. The nucleotide sequences of the overhangs are the same as those flanking IS3 in the parental plasmid, suggesting that the linear IS3 molecules are generated from the parental plasmid DNA by staggered double strand breaks at the end regions of IS3. The linear IS3 molecules are likely to be the early intermediates in the transposition reaction, which proceeds in a non-replicative manner.

An in vivo transposase-catalyzed single-stranded DNA circularization reaction

Expression of the bacterial insertion sequence IS911 transposase in vivo leads to excision and circularization of IS911-based transposons. We show here that transposase produces an unusual molecular form generated by single-strand cleavage, transfer, and ligation of one end of the element to the opposite end. When the transposon is carried by a circular plasmid, this results in the formation of a "figure-eight" molecule in which a single strand of the transposon is circularized while the corresponding strand of the vector backbone retains a single-strand interruption at this position. The results show that a 3' end of the transposon is transferred to the opposite target end. Transposase is therefore capable of introducing single-strand cleavages at the ends of the element, an activity similar to that of retroviral integrases with which it shares significant similarities in amino acid sequence. Kinetic studies demonstrate that the figure-eight accumulates earlier than transposon circles after transposase induction and disappears before circles after inhibition of transposase expression, raising the possibility that the figure-eight molecules are precursors to the circles. Therefore, IS911 excision as a circle may not occur by double-strand cleavage leading to its prior separation from the vector backbone in a linear form but could proceed by consecutive circularization of each strand.

Characterization of IS1221 from Mycoplasma hyorhinis: expression of its putative transposase in Escherichia coli incorporates a ribosomal frameshift mechanism

Seven complete and two partial copies of IS1221 variants from Mycoplasma hyorhinis and Mycoplasma hyopneumoniae characterized to date have established a consensus IS1221 as a 1513 bp element with unique structural characteristics resembling the IS3 family of bacterial insertion sequences. Each IS1221 copy contains highly conserved 28 bp imperfect terminal inverted repeats and three distinctive internal inverted repeats (LIR, RIR and IIR). IIR is located within the coding region of the element and it is proposed that it plays a critical role in the regulation of putative transposase expression. Consensus IS1221 and one particular copy, G1135.2, contain a single long open reading frame (ORF). Two potential initiation codons are present at nucleotide 46 (AUG46) and nucleotide 397 (AUG397) and both are preceded by strong ribosome-binding sites. Both initiation codons can be used efficiently in an Escherichia coli T7 expression system. The LIR has a negative regulatory effect on translation initiation from AUG46. A-1 translational frameshift event is shown to be involved in expression of the IS1221 ORF and results in the production of 20 kDa and 6 kDa truncated proteins from the respective upstream initiation codons of the IS1221 ORF. Base substitution and deletion mutations in sequences resembling characterized motifs in documented examples of translational frameshifting resulted in a significant increase in the full-length products and a corresponding decrease in the truncated products from the IS1221 ORF. In contrast to the usual -1 frameshift regulatory event in the IS3 family, which produces a transframe fusion product as the active transposase, IS1221 may have evolved a high-frequency -1 frameshift mechanism that produces a truncated product from the upstream coding domain and thereby results in the regulated low-level production of the full-length presumptive transposase.

IS1222: analysis and distribution of a new insertion sequence in Enterobacter agglomerans 339

With a length of 1221 bp and 44-bp inverted repeats with ten mismatches, IS1222 was identified as an endogenous insertion sequence in Enterobacter agglomerans 339. In this host strain, four copies were located, three on the nif plasmid pEA9 and one at the chromosome. Sequence analysis showed two consecutive open reading frames, orfA and orfB, encoding putative polypeptides of 87 and 276 amino acids. In-between both reading frames, a potential frameshift window of the homonucleotide type was postulated, followed by a pseudoknot structure and a ribosome-binding site. Based on significant homology at the sequence level and similarity of the features discussed, IS1222 was placed among the group of IS3 elements with IS407, IS476 and ISR1 being the most closely related IS. Hybridization experiments suggest that the distribution of IS1222 is limited to a group of related bacterial strains among Enterobacteriaceae.

Cloning and characterization of upp, a gene encoding uracil phosphoribosyltransferase from Lactococcus lactis

Uracil phosphoribosyltransferase catalyzes the key reaction in the salvage of uracil in many microorganisms. The gene encoding uracil phosphoribosyltransferase (upp) was cloned from Lactococcus lactis subsp. cremoris MG1363 by complementation of an Escherichia coli mutant. The gene was sequenced, and the putative amino acid sequence was deduced. The promoter was mapped by both primer extension and analysis of beta-galactosidase expressed from strains carrying fusion between upp promoter fragments and the lacLM gene. The results showed that the upp gene was expressed from its own promoter. After in vitro construction of an internal deletion, a upp mutant was constructed by a double-crossover event. This implicated the utilization of a plasmid with a thermosensitive origin of replication and a new and easy way to screen for double crossover events in both gram-positive and gram-negative bacterial strains. The phenotype of the uracil phosphoribosyltransferase-deficient strain was established. Surprisingly, the upp strain is resistant only to very low concentrations of 5-fluorouracil. Secondary mutants in thymidine phosphorylase and thymidine kinase were isolated by selection for resistance to high concentrations of 5-fluorouracil.

Transposition in Lactobacillus sake and its abolition of lactocin S production by insertion of IS1163, a new member of the IS3 family

This report presents the nucleotide sequence and insertional activity of IS1163, which is a new member of the IS3 family of transposable elements. Analysis of spontaneous mutants of the lactocin S-producing Lactobacillus sake strain L45 show that the bacteriocin-negative phenotype is due to either loss of the producer plasmid or the insertion of IS1163 into the lactocin S operon (las operon). The data further show that insertional inactivation of the lactocin S operon is the result of a transposition event involving a chromosomally located donor copy of IS1163. Although the insertions described are clustered within a 250-bp region of the las operon, there are no features of the insertion sites to suggest target-specific insertion of IS1163. The overlapping, frameshifted organization of the two major open reading frames found in IS1163 is typical for the IS3 family, but the structure of the putative frameshift region includes features which distinguish IS1163 from the other members of the group. The insertional activity of IS1163 in L. sake L45 has aided in identifying regions of pCIM1 essential for lactocin S production and may have further practical applications as a mutational tool in L. sake.

Insertion sequence-related genetic variation in resting Escherichia coli K-12

Bacterial subclones recovered from an old stab culture of Escherichia coli K-12 revealed a high degree of genetic diversity, which occurred in spite of a very reduced rate of propagation during storage. This conclusion is based on a pronounced restriction fragment length polymorphism (RFLP) detected upon hybridization with internal fragments of eight resident insertion sequences (IS). Genetic diversity was dependent on the IS considered and, in many cases, a clear consequence of IS transposition. IS5 was particularly active in the generation of variation. All subclones in which IS30 had been active testify to a burst of IS30 transposition. This was correlated with a loss of prototrophy and a reduced growth on rich media. A pedigree of the entire clone could be drawn from the RFLP patterns of the subclones. Out of 118 subclones analyzed, 68 different patterns were found but the putative ancestral population had disappeared. A few patterns were each represented by several subclones displaying improved fitness. These results offer insights into the role of IS elements in the plasticity of the E. coli genome, and they further document that enzyme-mediated DNA rearrangements do occur in resting bacterial cultures.

Isolation and characterization of IS31831, a transposable element from Corynebacterium glutamicum

A transposable element from a coryneform bacterium, Corynebacterium glutamicum ATCC 31831 was isolated and characterized. The element IS31831 is a 1453 bp insertion sequence with 24 bp imperfect terminal inverted repeats. It contains one open reading frame highly homologous at the amino acid level to the transposase of IS1096 from Mycobacterium smegmatis. Both IS31831 and IS1096 exhibit several common characteristics suggesting that they constitute a new family of insertion sequences. IS31831 was isolated by taking advantage of the sucrose sensitivity of coryneform bacteria conferred by expression of the Bacillus subtilis sacB gene. An Escherichia coli/Corynebacterium shuttle vector useful for the isolation of transposable elements from the coryneform group of bacteria was constructed.

Identification and characterization of IS1138, a transposable element from Mycoplasma pulmonis that belongs to the IS3 family

Insertion sequence (IS) elements are mobile genetic elements found in prokaryotes. We have identified a repetitive element from Mycoplasma pulmonis, a murine pathogen, that is similar to eubacterial IS elements. By subcloning a single strain of M. pulmonis, we isolated a variant clone in which the IS element had undergone an apparent transposition event. The nucleotide sequences of the element, designated IS1138, and the target site into which it inserted were determined. IS1138 consists of 1288 bp with 18 bp perfect terminal inverted repeats. Sequence analysis of the target site before and after insertion of IS1138 identified a 3 bp duplication of target DNA flanking the element. The predicted amino acids encoded by the major open reading frame of IS1138 share significant similarity with the transposases of the IS3 family. Southern hybridization analysis indicates that repetitive sequences similar to IS1138 are present in most, if not all, strains of M. pulmonis, but IS1138-like sequences were not detected in other mycoplasmal species.

Translational frameshifting in the control of transposition in bacteria

The expression of an increasing number of genes of both prokaryotic and eukaryotic origin has been shown to be regulated at the translational level by programmed (sequence-specific) ribosomal frameshifting. Among these are the bacterial insertion sequences IS1 and two members of the widely distributed IS3-family, IS150 and IS911. Frameshifting provides a means of specifying several proteins with different functions using a minimum of genetic information. In this review, we survey present understanding of the way in which frameshifting is integrated into the overall control of transposition activity in these elements.

Cloning and sequencing of IS1086, an Alcaligenes eutrophus insertion element related to IS30 and IS4351

A new insertion sequence (IS), designated IS1086, was isolated from Alcaligenes eutrophus CH34 by being trapped in plasmid pJV240, which contains the Bacillus subtilis sacB and sacR genes. The 1,106-bp IS1086 element contains partially matched (22 of 28 bp) terminal-inverted repeats and a long open reading frame. Hybridization data suggest the presence of one copy of IS1086 in the strain CH34 heavy-metal resistance plasmid pMOL28 and at least two copies in its chromosome. Analysis of the IS1086 nucleotide sequence revealed striking homology with two other IS elements, IS30 and IS4351, suggesting that they are three close members in a family of phylogenetically related insertion sequences. One open reading frame of the Spiroplasma citri phage SpV1-R8A2 B was also found to be related to this IS family but to a lesser extent. Comparison of the G+C contents of IS30 and IS1086 revealed that they conform to their respective hosts (46 versus 50% for IS30 and Escherichia coli and 64.5% for IS1086 and A. eutrophus). The pressure on the AT/GC ratio led to a very different codon usage in these two closely related IS elements. Results suggesting that IS1086 transposition might be activated by some forms of stress are discussed.

Amino acid substitutions in naturally occurring variants of ail result in altered invasion activity

Yersinia enterocolitica is the causative agent of a variety of gastrointestinal syndromes ranging from acute enteritis to mesenteric lymphadenitis. In addition, systemic infections resulting in high mortality rates can occur in elderly and immunocompromised patients. More than 50 serotypes of Y. enterocolitica have been identified, but only a few of them commonly cause disease in otherwise healthy hosts. Those serotypes that cause disease have been divided into two groups, American and non-American, based on their geographical distributions, biotypes, and pathogenicity. We have been studying two genes, inv and ail, from Y. enterocolitica that confer in tissue culture assays an invasive phenotype that strongly correlates with virulence. Some differences between the American and non-American serotypes at the ail locus were noted previously and have been investigated further in this report. The ail locus was cloned from seven Y. enterocolitica strains (seven different serotypes). Although the different clones produced similar amounts of Ail, the product of the ail gene from non-American serotypes (AilNA) was less able to promote invasion by Escherichia coli than was the product of the ail gene from American serotypes (AilA). This difference is probably due to one or more of the eight amino acid changes found in the derived amino acid sequence for the mature form of AilNA compared with that of AilA. Seven of these changes are predicted to be in cell surface domains of the protein (a model for the proposed folding of Ail within the outer membrane is presented). These results are discussed in relation to the growing family of outer membrane proteins, which includes Lom from bacteriophage lambda, PagC from salmonella typhimurium, and OmpX from Enterobacter cloacae.

DNA sequence of IS91 and identification of the transposase gene

IS91 is a 1,830-bp insertion sequence that inserts specifically at the sequence CAAG or GAAC of the target and does not duplicate any sequence upon insertion (23). By transposon mutagenesis, we have identified open reading frame 426 (ORF426; bp 454 to 1731) as the putative ORF for the transposase. It displays a cysteine-rich, potential metal-binding domain in its N-terminal region. Adjacent to ORF426, there is an ORF (ORF121) which precedes and terminally overlaps ORF426 by one amino acid. Tn1732 insertions in ORF121 do not affect the transposition frequency. IS91 has sequence similarities to IS801 from Pseudomonas syringae. Their putative transposases are 36% identical, including conservation of the cysteine-rich cluster. The information concerning IS801 insertion specificity and target duplication has been reevaluated in the light of our results.

Programmed translational frameshifting and initiation at an AUU codon in gene expression of bacterial insertion sequence IS911

The proteins expressed by insertion sequence IS911, a member of the widespread IS3 family of elements, have been analyzed. The results indicate that three major species are produced from two consecutive reading frames. A protein of Mr 11,500, ORFA, is synthesized from an upstream reading frame. A larger protein, ORFAB, uses the same initiation codon and is produced by a -1 programmed translational frameshift between orfA and a downstream frame, orfB, whose amino acid sequence shows significant homology with retroviral integrase proteins. The orfB frame is also expressed independently in two alternative forms: the first uses a rare AUU initiation codon in the orfB phase whereas the second appears to initiate in the orfA phase and is produced by a -1 frameshift mechanism similar to that used in ORFAB expression. A specific IS911 integration reaction using a minimal active junction composed of 51 base-pairs of the right inverted repeat and a flanking phase lambda sequence resembling a second end in inverted orientation has been developed to analyze the functions of these proteins by transcomplementation in vivo. The orfA and orfB frames are shown to be essential and production of ORFAB is shown to stimulate integration in this system, suggesting that this fusion protein is the IS911 transposase.

Translation initiation of IS50R read-through transcripts

IS50R (and Tn5) normally transposes at a low frequency, partly because cells containing this insertion sequence synthesize low levels of the transposase protein. Since the 5' end of the transposase gene is located next to the outer end of IS50R (and thus close to flanking host sequences), transposition into actively transcribed genes could result in the production of read-through transcripts that would encode the transposase. We have found that these read-through transcripts are made, but are translated poorly. We isolated mutations that increase translation initiation of transposase from read-through transcripts. Most of these mutations destabilize a potential RNA secondary structure in the ribosome binding site that could form in read-through transcripts, but not in normal transcripts. In vitro RNA secondary structure analysis has confirmed the predicted RNA secondary structure and the effects of mutations. We have shown that RNA secondary structure is the major factor limiting transposase expression from read-through transcripts.

Characterization of the IS895 family of insertion sequences from the cyanobacterium Anabaena sp. strain PCC 7120

A family of repetitive elements from the cyanobacterium Anabaena sp. strain PCC 7120 was identified through the proximity of one element to the psbAI gene. Four members of this seven-member family were isolated and shown to have structures characteristic of bacterial insertion sequences. Each element is approximately 1,200 bp in length, is delimited by a 30-bp inverted repeat, and contains two open reading frames in tandem on the same DNA strand. The four copies differ from each other by small insertions or deletions, some of which alter the open reading frames. By using a system designed to trap insertion elements, one of the elements, denoted IS895, was shown to be mobile. The target site was not duplicated upon insertion of the element. Two other filamentous cyanobacterial strains were also found to contain sequences homologous to IS895.

High-level ribosomal frameshifting directs the synthesis of IS150 gene products

IS150 contains two tandem, out-of-phase, overlapping genes, ins150A and ins150B, which are controlled by the same promoter. These genes encode proteins of 19 and 31 kD, respectively. A third protein of 49 kD is a transframe gene product consisting of domains encoded by both genes. Specific -1 ribosomal frameshifting is responsible for the synthesis of the large protein. Expression of ins150B also involves frameshifting. The IS150 frameshifting signals operate with a remarkably high efficiency, causing about one third of the ribosomes to switch frame. All of the signals required for this process are encoded in a 83-bp segment of the element. The heptanucleotide A AAA AAG and a potential stem-loop-forming sequence mark the frameshifting site. Similar sequence elements are found in -1 frameshifting regions of bacterial and retroviral genes. A mutation within the stem-loop sequence reduces the rate of frameshifting by about 80%. Artificial transposons carrying this mutation transpose at a normal frequency, but form cointegrates at a approximately 100-fold reduced rate.

Factors determining the frequency of plasmid cointegrate formation mediated by insertion sequence IS3 from Escherichia coli

Transposition events mediated by plasmidborne copies of the insertion sequence IS3 of Escherichia coli are difficult to detect because of a low frequency of cointegrate formation. We found that cointegration activity could be strongly enhanced by using plasmid constructions in which a second IS3 element, disabled by a large deletion, was placed adjacent to an intact IS3 copy. Attempts to construct plasmids containing two adjacent intact IS3 copies were unsuccessful, probably because of instability. Transpositional hyperactivity of tandemly duplicated IS sequences was previously described for spontaneous duplications of IS21 and IS30 and may well be a more general phenomenon. The frequency of cointegration events was also strongly increased in an E. coli strain deficient in Dam methylation, suggesting that IS3, like some other Dam site-containing IS elements, is regulated by the Dam methylation system. Insertion sites were strongly clustered within the target lambda repressor gene: however no sequence specificity determinants could be identified. All insertions analyzed carried the IS element in the same orientation; target sequence duplications were mostly 3 bp, but in some cases 4 bp long. To obtain information about the roles of the open reading frames (ORFs) in IS3, we constructed plasmid-borne mutant elements in which potentially functional reading frames were inactivated by site-directed mutations; the mutants were introduced into partial tandem constructions and tested in cointegration assays. Mutations inactivating the putative initiation condons of ORF I and II in the intact element reduced insertion activity to less than 4% of the wild type, whereas the introduction of a termination codon into ORF IV had no effect on cointegration frequency.(ABSTRACT TRUNCATED AT 250 WORDS)

Identification, DNA sequence, and distribution of IS981, a new, high-copy-number insertion sequence in lactococci

An insertion in the lactococcal plasmid pGBK17, which inactivated the gene(s) encoding resistance to the prolate-headed phage c2, was cloned, sequenced, and identified as a new lactococcal insertion sequence (IS). IS981 was 1,222 bp in size and contained two open reading frames, one large enough to encode a transposase. IS981 ended in imperfect inverted repeats of 26 of 40 bp and generated a 5-bp direct repeat of target DNA at the site of insertion. IS981 was present on the chromosome of Lactococcus lactis subsp. lactis LM0230 from where it transposed to pGBK17 during transformation. Twenty-three strains of lactococci examined for the presence of IS981 by Southern hybridization showed 4 to 26 copies per genome, with L. lactis subsp. cremoris strains containing the highest number of copies. Comparison of the DNA sequence and the amino acid sequence of the long open reading frame to other known sequences showed that IS981 is related to a family of IS elements that includes IS2, IS3, IS51, IS150, IS600, IS629, IS861, IS904, and ISL1.

Functional similarities between retroviruses and the IS3 family of bacterial insertion sequences?

Members of the IS3 family of insertion sequences are found in a wide range of bacteria. At least 10 members of this family carry two major open reading frames: a small upstream frame (0 phase), and a longer downstream frame in the -1 phase. The downstream frame shows significant similarity at the amino acid level. A highly conserved region of this frame also exhibits notable similarity with a region of the integrase (endonuclease) domain of retroviruses. Although the overall transposition mechanism of the insertion sequence and retroviral elements is certainly different, the two groups may share additional common features, including a -1 frameshift resulting in the production of a fusion protein.

Characterization of a Mycobacterium tuberculosis insertion sequence belonging to the IS3 family

A repetitive element (IS986), previously isolated from Mycobacterium tuberculosis and shown to detect multiple restriction fragment-length polymorphisms (RFLPs), has been sequenced. It consists of a potential insertion sequence of 1358bp, with 30-bp inverted repeat ends. IS986 has four potentially significant open reading frames (ORFs): ORFa1, ORFa2 and ORFb on one strand and ORFc on the complementary strand. The sequences of the potential translated products identify IS986 as a member of the IS3 family, with an apparent frameshift between ORFa1 and ORFa2. IS986 has potential as a highly specific probe for detection and typing of M. tuberculosis, as well as for transposon mutagenesis of mycobacteria. The sequence of IS986 is virtually identical to that of another recently described element, IS6110 (Thierry et al., 1990).

Transposition in Shigella dysenteriae: isolation and analysis of IS911, a new member of the IS3 group of insertion sequences

Twenty-nine clear-plaque mutants of bacteriophage lambda were isolated from a Shigella dysenteriae lysogen. Three were associated with insertions in the cI gene: two were due to insertion of IS600, and the third resulted from insertion of a new element, IS911. IS911 is 1,250 base pairs (bp) long, carries 27-bp imperfect terminal inverted repeats, and generates 3-bp duplications of the target DNA on insertion. It was found in various copy numbers in all four species of Shigella tested and in Escherichia coli K-12 but not in E. coli W. Analysis of IS911-mediated cointegrate molecules indicated that the majority were generated without duplication of IS911. They appeared to result from direct insertion via one end of the element and the neighboring region of DNA, which resembles a terminal inverted repeat of IS911. Nucleotide sequence analysis revealed that IS911 carries two consecutive open reading frames which code for potential proteins showing similarities to those of the IS3 group of elements.