High-level ribosomal frameshifting directs the synthesis of IS150 gene products

A more significant role for insertion sequences in large-scale rearrangements in bacterial genomes

Insertion sequences (ISs) are mobile pieces of DNA that are widespread in bacterial genomes. IS movements typically involve (i) excision of the IS element, (ii) cutting of target site DNA, and (iii) IS element insertion. This process generates a new copy of the IS element and a short duplication at the target site. It has been noted that, for some extant IS copies, no target site duplications (TSDs) are readily identifiable. TSD absence has been attributed to degeneration of the TSD after the insertion event, recombination between identical ISs, or adjacent deletions. Indeed, the latter two-recombination between ISs and adjacent deletions-are frequent causes for the absence of TSDs, which we demonstrate here in an analysis of genome sequence data from the Lenski long-term evolution experiment. Furthermore, we propose that some IS movements-namely, those that occur in association with large-scale genomic rearrangements-do not generate TSDs, and occur without evidence for recombination between ISs or adjacent deletions. In support of this hypothesis, we provide two direct, empirical observations of such IS transposition events: an IS5 movement plus a large deletion in Escherichia coli C, and an IS481 movement occurring with a large duplication in Pseudomonas fluorescens SBW25. Although unlikely, it is possible that the observed deletion and associated IS movement occurred in two successive events in one overnight culture. However, an IS at the center of a large-scale duplication is not readily explained, suggesting that IS element activity may promote both large-scale deletions and duplications.

IMPORTANCE

Insertion sequences are the most common mobile genetic elements found in bacterial genomes, and hence they significantly impact bacterial evolution. We observe insertion sequence movement at the center of large-scale deletions and duplications that occurred during laboratory evolution experiments with Escherichia coli and Pseudomonas fluorescens, involving three distinct types of transposase. We raise the possibility that the transposase does not mediate DNA cleavage but instead inserts into existing DNA breaks. Our research highlights the importance of insertion sequences for the generation of large-scale genomic rearrangements and raises questions concerning the mechanistic basis of these mutations.

Widespread loss-of-function mutations implicating preexisting resistance to new or repurposed anti-tuberculosis drugs

BACKGROUND

Five New or Repurposed Drugs (NRDs) were approved in the last decade for treatment of multi-drug resistant tuberculosis: bedaquiline, clofazimine, linezolid, delamanid, and pretomanid. Unfortunately, resistance to these drugs emerged faster than anticipated, potentially due to preexisting resistance in naïve strains. Previous investigations into the rapid emergence have mostly included short variants. For the first time, we utilize de novo-assembled genomes, and systematically include Structural Variations (SV) and heterogeneity to comprehensively study this rapid emergence. We show high prevalence of preexisting resistance, identify novel markers of resistance, and lay the foundation for preventing preexisting resistance in future drug development.

METHODS

First, a systematic literature review revealed 313 NRD resistance variants in 13 genes. Next, 409 globally diverse clinical isolates collected prior to the drugs' programmatic use (308 were multidrug resistant, 106 had de novo assembled genomes) were utilized to study the 13 genes comprehensively for conventional, structural, and heterogeneous variants.

FINDINGS

We identified 5 previously reported and 67 novel putative NRD resistance variants. These variants were 2 promoter mutations (in 8/409 isolates), 13 frameshifts (21/409), 6 SVs (9/409), 35 heterogeneous frameshifts (32/409) and 11 heterogeneous SVs (12/106). Delamanid and pretomanid resistance mutations were most prevalent (48/409), while linezolid resistance mutations were least prevalent (8/409).

INTERPRETATION

Preexisting mutations implicated in resistance to at least one NRD was highly prevalent (85/409, 21 %). This was mostly caused by loss-of-function mutations in genes responsible for prodrug activation and efflux pump regulation. These preexisting mutations may have emerged through a bet-hedging strategy, or through cross-resistance with non-tuberculosis drugs such as metronidazole. Future drugs that could be resisted through loss-of-function in non-essential genes may suffer from preexisting resistance. The methods used here for comprehensive preexisting resistance assessment (especially SVs and heterogeneity) may mitigate this risk during early-stage drug development.

Localization of Insertion Sequences in Plasmids for L-Cysteine Production in E. coli

Insertion sequence elements (ISE) are often found to be responsible for the collapse of production in synthetically engineered Escherichia coli. By the transposition of ISE into the open reading frame of the synthetic pathway, E. coli cells gain selection advantage over cells expressing the metabolic burdensome production genes. Here, we present the exact entry sites of insertion sequence (IS) families 3 and 5 within plasmids for l-cysteine production in evolved E. coli populations. Furthermore, we identified an uncommon occurrence of an 8-bp direct repeat of IS5 which is atypical for this particular family, potentially indicating a new IS5 target site.

Correction of frameshift mutations in the atpB gene by translational recoding in chloroplasts of Oenothera and tobacco

Translational recoding, also known as ribosomal frameshifting, is a process that causes ribosome slippage along the messenger RNA, thereby changing the amino acid sequence of the synthesized protein. Whether the chloroplast employs recoding is unknown. I-iota, a plastome mutant of Oenothera (evening primrose), carries a single adenine insertion in an oligoA stretch [11A] of the atpB coding region (encoding the β-subunit of the ATP synthase). The mutation is expected to cause synthesis of a truncated, nonfunctional protein. We report that a full-length AtpB protein is detectable in I-iota leaves, suggesting operation of a recoding mechanism. To characterize the phenomenon, we generated transplastomic tobacco lines in which the atpB reading frame was altered by insertions or deletions in the oligoA motif. We observed that insertion of two adenines was more efficiently corrected than insertion of a single adenine, or deletion of one or two adenines. We further show that homopolymeric composition of the oligoA stretch is essential for recoding, as an additional replacement of AAA lysine codon by AAG resulted in an albino phenotype. Our work provides evidence for the operation of translational recoding in chloroplasts. Recoding enables correction of frameshift mutations and can restore photoautotrophic growth in the presence of a mutation that otherwise would be lethal.

Characterization of a functional insertion sequence ISSau2 from Staphylococcus aureus

Background

ISSau2 has been suggested as a member of the IS150 f subgroup in the IS3 family. It encodes a fusion transposase OrfAB produced by programmed − 1 translational frameshifting with two overlapping reading frames orfA and orfB. To better characterize ISSau2, the binding and cleaving activities of the ISSau2 transposase and its transposition frequency were studied.

Results

The purified ISSau2 transposase OrfAB was a functional protein in vitro since it bound specifically to ISSau2 terminal inverted repeat sequences (IRs) and cleaved the transposon ends at the artificial mini-transposon pUC19-IRL-gfp-IRR. In addition, the transposition frequency of ISSau2 in vivo was approximately 1.76 ± 0.13 × 10^− 3, based on a GFP hop-on assay. Furthermore, OrfB cleaved IRs with the similar catalytic activity of OrfAB, while OrfA had no catalytic activity. Finally, either OrfA or OrfB significantly reduced the transposition of ISSau2 induced by OrfAB.

Conclusion

We have confirmed that ISSau2 is a member of IS150/IS3 family. The ISSau2 transposase OrfAB could bind to and cleave the specific fragments containing the terminal inverted repeat sequences and induce the transposition, suggesting that ISSau2 is at least partially functional. Meanwhile, both OrfA and OrfB inhibited the transposition by ISSau2. Our results will help understand biological roles of ISSau2 in its host S. aureus.

Copy-out-Paste-in Transposition of IS911: A Major Transposition Pathway

IS911 has provided a powerful model for studying the transposition of members of a large class of transposable element: the IS3 family of bacterial Insertion Sequences (IS). These transpose by a Copy-out-Paste-in mechanism in which a double-strand IS circle transposition intermediate is generated from the donor site by replication and proceeds to integrate into a suitable double strand DNA target. This is perhaps one of the most common transposition mechanisms known to date. Copy-out-Paste-in transposition has been adopted by members of at least eight large IS families. This chapter details the different steps of the Copy-out-Paste-in mechanism involved in IS911 transposition. At a more biological level it also describes various aspects of regulation of the transposition process. These include transposase production by programmed translational frameshifting, transposase expression from the circular intermediate using a specialized promoter assembled at the circle junction and binding of the nascent transposase while it remains attached to the ribosome during translation (co-translational binding). This co-translational binding of the transposase to neighboring IS ends provides an explanation for the longstanding observation that transposases show a cis-preference for their activities.

Characterization of Insertion Sequence ISSau2 in the Human and Livestock-Associated Staphylococcus aureus

Mobile genetic elements play important roles in evolution and diversification of bacterial genomes. ISSau2 is 1660bp in length with terminal 5’-TG and CA-3’ dinucleotides and has two overlapping reading frames orfA and orfB. It has been found in a wide range of S. aureus, such as HA-MRSA252, LGA251, MRSA S0385 and ED133. To determine distribution of ISSau2, 164 S. aureus isolates from milk samples of mastitic cows from our laboratory and all the S. aureus strains from the National Center for Biotechnology Information (NCBI) database were screened for the presence of ISSau2. Next, in order to explore a potential relationship among S. aureus ISSau2-containing strains and isolates, a relationship among 10 ISSau2-positive S. aureus isolates and 27 ISSau2-positive S. aureus strains was investigated by a phylogenetic analysis. These ISSau2 isolates and strains could be classified into four groups (A, B, C and D). The strains or isolates in Group D were all isolated from mammary glands, suggesting tissue specificity. All strains in Group B had an identical ISSau2 derivative, termed ISSau2₁₆₂₈, with 32bp deletion at the 3’ terminus. ISSau2₁₆₂₈ in strain ST398 from Group B was closely related to ISSau2 in strain LGA251 from Group D.

Analysis of tetra- and hepta-nucleotides motifs promoting -1 ribosomal frameshifting in Escherichia coli

Programmed ribosomal -1 frameshifting is a non-standard decoding process occurring when ribosomes encounter a signal embedded in the mRNA of certain eukaryotic and prokaryotic genes. This signal has a mandatory component, the frameshift motif: it is either a Z_ZZN tetramer or a X_XXZ_ZZN heptamer (where ZZZ and XXX are three identical nucleotides) allowing cognate or near-cognate repairing to the -1 frame of the A site or A and P sites tRNAs. Depending on the signal, the frameshifting frequency can vary over a wide range, from less than 1% to more than 50%. The present study combines experimental and bioinformatics approaches to carry out (i) a systematic analysis of the frameshift propensity of all possible motifs (16 Z_ZZN tetramers and 64 X_XXZ_ZZN heptamers) in Escherichia coli and (ii) the identification of genes potentially using this mode of expression amongst 36 Enterobacteriaceae genomes. While motif efficiency varies widely, a major distinctive rule of bacterial -1 frameshifting is that the most efficient motifs are those allowing cognate re-pairing of the A site tRNA from ZZN to ZZZ. The outcome of the genomic search is a set of 69 gene clusters, 59 of which constitute new candidates for functional utilization of -1 frameshifting.

Evidence that the insertion events of IS2 transposition are biased towards abrupt compositional shifts in target DNA and modulated by a diverse set of culture parameters

Insertion specificity of mobile genetic elements is a rather complex aspect of DNA transposition, which, despite much progress towards its elucidation, still remains incompletely understood. We report here the results of a meta-analysis of IS2 target sites from genomic, phage, and plasmid DNA and find that newly acquired IS2 elements are consistently inserted around abrupt DNA compositional shifts, particularly in the form of switch sites of GC skew. The results presented in this study not only corroborate our previous observations that both the insertion sequence (IS) minicircle junction and target region adopt intrinsically bent conformations in IS2, but most interestingly, extend this requirement to other families of IS elements. Using this information, we were able to pinpoint regions with high propensity for transposition and to predict and detect, de novo, a novel IS2 insertion event in the 3' region of the gfp gene of a reporter plasmid. We also found that during amplification of this plasmid, process parameters such as scale, culture growth phase, and medium composition exacerbate IS2 transposition, leading to contamination levels with potentially detrimental clinical effects. Overall, our findings provide new insights into the role of target DNA structure in the mechanism of transposition of IS elements and extend our understanding of how culture conditions are a relevant factor in the induction of genetic instability.

Protein-DNA interactions define the mechanistic aspects of circle formation and insertion reactions in IS2 transposition

BACKGROUND

Transposition in IS3, IS30, IS21 and IS256 insertion sequence (IS) families utilizes an unconventional two-step pathway. A figure-of-eight intermediate in Step I, from asymmetric single-strand cleavage and joining reactions, is converted into a double-stranded minicircle whose junction (the abutted left and right ends) is the substrate for symmetrical transesterification attacks on target DNA in Step II, suggesting intrinsically different synaptic complexes (SC) for each step. Transposases of these ISs bind poorly to cognate DNA and comparative biophysical analyses of SC I and SC II have proven elusive. We have prepared a native, soluble, active, GFP-tagged fusion derivative of the IS2 transposase that creates fully formed complexes with single-end and minicircle junction (MCJ) substrates and used these successfully in hydroxyl radical footprinting experiments.

RESULTS

In IS2, Step I reactions are physically and chemically asymmetric; the left imperfect, inverted repeat (IRL), the exclusive recipient end, lacks donor function. In SC I, different protection patterns of the cleavage domains (CDs) of the right imperfect inverted repeat (IRR; extensive in cis) and IRL (selective in trans) at the single active cognate IRR catalytic center (CC) are related to their donor and recipient functions. In SC II, extensive binding of the IRL CD in trans and of the abutted IRR CD in cis at this CC represents the first phase of the complex. An MCJ substrate precleaved at the 3' end of IRR revealed a temporary transition state with the IRL CD disengaged from the protein. We propose that in SC II, sequential 3' cleavages at the bound abutted CDs trigger a conformational change, allowing the IRL CD to complex to its cognate CC, producing the second phase. Corroborating data from enhanced residues and curvature propensity plots suggest that CD to CD interactions in SC I and SC II require IRL to assume a bent structure, to facilitate binding in trans.

CONCLUSIONS

Different transpososomes are assembled in each step of the IS2 transposition pathway. Recipient versus donor end functions of the IRL CD in SC I and SC II and the conformational change in SC II that produces the phase needed for symmetrical IRL and IRR donor attacks on target DNA highlight the differences.

Soluble expression, purification and characterization of the full length IS2 Transposase

BACKGROUND

The two-step transposition pathway of insertion sequences of the IS3 family, and several other families, involves first the formation of a branched figure-of-eight (F-8) structure by an asymmetric single strand cleavage at one optional donor end and joining to the flanking host DNA near the target end. Its conversion to a double stranded minicircle precedes the second insertional step, where both ends function as donors. In IS2, the left end which lacks donor function in Step I acquires it in Step II. The assembly of two intrinsically different protein-DNA complexes in these F-8 generating elements has been intuitively proposed, but a barrier to testing this hypothesis has been the difficulty of isolating a full length, soluble and active transposase that creates fully formed synaptic complexes in vitro with protein bound to both binding and catalytic domains of the ends. We address here a solution to expressing, purifying and structurally analyzing such a protein.

RESULTS

A soluble and active IS2 transposase derivative with GFP fused to its C-terminus functions as efficiently as the native protein in in vivo transposition assays. In vitro electrophoretic mobility shift assay data show that the partially purified protein prepared under native conditions binds very efficiently to cognate DNA, utilizing both N- and C-terminal residues. As a precursor to biophysical analyses of these complexes, a fluorescence-based random mutagenesis protocol was developed that enabled a structure-function analysis of the protein with good resolution at the secondary structure level. The results extend previous structure-function work on IS3 family transposases, identifying the binding domain as a three helix H + HTH bundle and explaining the function of an atypical leucine zipper-like motif in IS2. In addition gain- and loss-of-function mutations in the catalytic active site define its role in regional and global binding and identify functional signatures that are common to the three dimensional catalytic core motif of the retroviral integrase superfamily.

CONCLUSIONS

Intractably insoluble transposases, such as the IS2 transposase, prepared by solubilization protocols are often refractory to whole protein structure-function studies. The results described here have validated the use of GFP-tagging and fluorescence-based random mutagenesis in overcoming this limitation at the secondary structure level.

A pilot study of bacterial genes with disrupted ORFs reveals a surprising profusion of protein sequence recoding mediated by ribosomal frameshifting and transcriptional realignment

Bacterial genome annotations contain a number of coding sequences (CDSs) that, in spite of reading frame disruptions, encode a single continuous polypeptide. Such disruptions have different origins: sequencing errors, frameshift, or stop codon mutations, as well as instances of utilization of nontriplet decoding. We have extracted over 1,000 CDSs with annotated disruptions and found that about 75% of them can be clustered into 64 groups based on sequence similarity. Analysis of the clusters revealed deep phylogenetic conservation of open reading frame organization as well as the presence of conserved sequence patterns that indicate likely utilization of the nonstandard decoding mechanisms: programmed ribosomal frameshifting (PRF) and programmed transcriptional realignment (PTR). Further enrichment of these clusters with additional homologous nucleotide sequences revealed over 6,000 candidate genes utilizing PRF or PTR. Analysis of the patterns of conservation apparently associated with nontriplet decoding revealed the presence of both previously characterized frameshift-prone sequences and a few novel ones. Since the starting point of our analysis was a set of genes with already annotated disruptions, it is highly plausible that in this study, we have identified only a fraction of all bacterial genes that utilize PRF or PTR. In addition to the identification of a large number of recoded genes, a surprising observation is that nearly half of them are expressed via PTR-a mechanism that, in contrast to PRF, has not yet received substantial attention.

The interplay of mRNA stimulatory signals required for AUU-mediated initiation and programmed -1 ribosomal frameshifting in decoding of transposable element IS911

The IS911 bacterial transposable element uses -1 programmed translational frameshifting to generate the protein required for its mobility: translation initiated in one gene (orfA) shifts to the -1 frame and continues in a second overlapping gene (orfB), thus generating the OrfAB transposase. The A-AAA-AAG frameshift site of IS911 is flanked by two stimulatory elements, an upstream Shine-Dalgarno sequence and a downstream stem-loop. We show here that, while they can act independently, these stimulators have a synergistic effect when combined. Mutagenic analyses revealed features of the complex stem-loop that make it a low-efficiency stimulator. They also revealed the dual role of the upstream Shine-Dalgarno sequence as (i) a stimulator of frameshifting, by itself more potent than the stem-loop, and (ii) a mandatory determinant of initiation of OrfB protein synthesis on an AUU codon directly preceding the A6G motif. Both roles rely on transient base pairing of the Shine-Dalgarno sequence with the 3' end of 16S rRNA. Because of its effect on frameshifting, the Shine-Dalgarno sequence is an important determinant of the level of transposase in IS911-containing cells, and hence of the frequency of transposition.

Transposition of a bacterial insertion sequence in chloroplasts

Bacterial transposable elements (IS elements, transposons) represent an important determinant of genome structure and dynamics, and are a major force driving genome evolution. Here, we have tested whether bacterial insertion sequences (IS elements) can transpose in a prokaryotic compartment of the plant cell, the plastid (chloroplast). Using plastid transformation, we have integrated different versions of the Escherichia coli IS element IS150 into the plastid genome of tobacco (Nicotiana tabacum) plants. We show that IS150 is faithfully mobilized inside the chloroplast, and that enormous quantities of transposition intermediates accumulate. As synthesis of the IS150 transposase is dependent upon programmed ribosomal frame shifting, our data indicate that this process also occurs in chloroplasts. Interestingly, all insertion events detected affect a single site in the plastid genome, suggesting that the integration of IS150 is highly sequence dependent. In contrast, the initiation of the transposition process was found to be independent of the sequence context. Finally, our data also demonstrate that plastids lack the capacity to repair double-strand breaks in their genomes by non-homologous end joining, a finding that has important implications for genome stability, and which may explain the peculiar immunity of the plastid to invading promiscuous DNA sequences of nuclear and mitochondrial origin.

Apical loop-internal loop RNA pseudoknots: a new type of stimulator of -1 translational frameshifting in bacteria

Nearly all members of a widespread family of bacterial transposable elements related to insertion sequence 3 (IS3), therefore called the IS3 family, very likely use programmed -1 ribosomal frameshifting to produce their transposase, a protein required for mobility. Comparative analysis of the potential frameshift signals in this family suggested that most of the insertion sequences from the IS51 group contain in their mRNA an elaborate pseudoknot that could act as a recoding stimulator. It results from a specific intramolecular interaction between an apical loop and an internal loop from two stem-loop structures. Directed mutagenesis, chemical probing, and gel mobility assays of the frameshift region of one element from the IS51 group, IS3411, provided clear evidences of the existence of the predicted structure. Modeling was used to generate a three-dimensional molecular representation of the apical loop-internal loop complex. We could demonstrate that mutations affecting the stability of the structure reduce both frameshifting and transposition, thus establishing the biological importance of this new type of RNA structure for the control of transposition level.

The complete genome sequence of Escherichia coli DH10B: insights into the biology of a laboratory workhorse

Escherichia coli DH10B was designed for the propagation of large insert DNA library clones. It is used extensively, taking advantage of properties such as high DNA transformation efficiency and maintenance of large plasmids. The strain was constructed by serial genetic recombination steps, but the underlying sequence changes remained unverified. We report the complete genomic sequence of DH10B by using reads accumulated from the bovine sequencing project at Baylor College of Medicine and assembled with DNAStar's SeqMan genome assembler. The DH10B genome is largely colinear with that of the wild-type K-12 strain MG1655, although it is substantially more complex than previously appreciated, allowing DH10B biology to be further explored. The 226 mutated genes in DH10B relative to MG1655 are mostly attributable to the extensive genetic manipulations the strain has undergone. However, we demonstrate that DH10B has a 13.5-fold higher mutation rate than MG1655, resulting from a dramatic increase in insertion sequence (IS) transposition, especially IS150. IS elements appear to have remodeled genome architecture, providing homologous recombination sites for a 113,260-bp tandem duplication and an inversion. DH10B requires leucine for growth on minimal medium due to the deletion of leuLABCD and harbors both the relA1 and spoT1 alleles causing both sensitivity to nutritional downshifts and slightly lower growth rates relative to the wild type. Finally, while the sequence confirms most of the reported alleles, the sequence of deoR is wild type, necessitating reexamination of the assumed basis for the high transformability of DH10B.

Two Frameshift Products Involved in the Transposition of Bacterial Insertion Sequence IS629

IS629 is 1,310 bp in length with a pair of 25-bp imperfect inverted repeats at its termini. Two partially overlapping open reading frames, orfA and orfB, are present in IS629, and two putative translational frameshift signals, TTTTG (T4G) and AAAAT (A4T), are located near the 3'-end of orfA. With the lacZ gene as the reporter, both T4G and A4T motifs are determined to be a -1 frameshift signal. Two peptides representing the two transframe products designated OrfAB' and OrfAB, are identified by a liquid chromatography-tandem mass spectrometric approach. Results of transposition assays show that OrfAB' is the transposase and that OrfAB aids in the transposition of IS629. Pulse-chase experiments and Escherichia coli two-hybrid assays demonstrate that OrfAB binds to and stabilizes OrfAB', thus increasing the transposition activity of IS629. This is the first transposable element in the IS3 family shown to have two functional frameshifted products involved in transposition and to use a transframe product to regulate transposition.

Host-dependent activation of IS1203v excision in Shiga toxin-producing Escherichia coli

IS1203v is an insertion sequence (IS) which is identical to the most abundant IS elements in the genome of Escherichia coli O157:H7. However, there is no sequence homologous to IS1203v in the genome of E. coli K-12. We constructed a system to analyze the excision frequency of IS1203v, and demonstrated that the frequency in E. coli O157:H7 was approximately 10(5) times higher than that in E. coli K-12. We also investigated the excision frequencies of IS1203v in various E. coli isolates, and showed that the excision frequencies of IS1203v-possessing strains were approximately 10(3) times higher than those of IS1203v-nonpossessing strains. The results suggest that the IS1203v-possessing strains use a common system to enhance IS1203v excision.

Antibiotic-induced expression of a crypticcpb2gene in equine β2-toxigenicClostridium perfringens

The cpb2 gene of beta2-toxigenic Clostridium perfringens isolated from horses, cattle, sheep, human and pigs was sequenced. The cpb2 gene of equine and other non-porcine isolates differed from porcine isolates by the absence of an adenine in a poly A tract immediately downstream of the start codon in all non-porcine C. perfringens strains. This deletion involved formation of a cryptic gene harbouring a premature stop codon after only nine amino acid codons, while the full beta2-toxin protein consists of 265 amino acids. Immunoblots carried out with antibodies directed against a recombinant beta2-toxin showed the absence of expression of the beta2-toxin in equine and the other non-porcine strains under standard culture conditions. However, treatment of C. perfringens with the aminoglycosides gentamicin or streptomycin was able to induce expression of the cpb2 gene in a representative equine strain of this group, presumably by frameshifting. The presence of the beta2-toxin was revealed by immunohistology in tissue samples of small and large intestine from horses with severe typhlocolitis that had been treated before with gentamicin. This result may explain the finding that antibiotic treatment of horses affected by beta2-toxigenic C. perfringens leads to a more accentuated and fatal progression of equine typhlocolitis. Clinical observations show a reduced appearance of strong typhlocolitis in horses with intestinal complications admitted to hospital care since the standard use of gentamicin has been abandoned. This is the first report on expression of a bacterial toxin gene by antibiotic-induced ribosomal frameshifting.

-1 frameshifting at a CGA AAG hexanucleotide site is required for transposition of insertion sequence IS1222

The discovery of programmed -1 frameshifting at the hexanucleotide shift site CGA_AAG, in addition to the classical X_XXY_YYZ heptanucleotide shift sequences, prompted a search for instances among eubacterial insertion sequence elements. IS1222 has a CGA_AAG shift site. A genetic analysis revealed that frameshifting at this site is required for transposition.

The left end of IS2: a compromise between transpositional activity and an essential promoter function that regulates the transposition pathway

Cut-and-paste (simple insertion) and replicative transposition pathways are the two classical paradigms by which transposable elements are mobilized. A novel variation of cut and paste, a two-step transposition cycle, has recently been proposed for insertion sequences of the IS3 family. In IS2 this variation involves the formation of a circular, putative transposition intermediate (the minicircle) in the first step. Two aspects of the minicircle may involve its proposed role in the second step (integration into the target). The first is the presence of a highly reactive junction formed by the two abutted ends of the element. The second is the assembly at the minicircle junction of a strong hybrid promoter which generates higher levels of transposase. In this report we show that IS2 possesses a highly reactive minicircle junction at which a strong promoter is assembled and that the promoter is needed for the efficient completion of the pathway. We show that the sequence diversions which characterize the imperfect inverted repeats or ends of this element have evolved specifically to permit the formation and optimal function of this promoter. While these sequence diversions eliminate catalytic activity of the left end (IRL) in the linear element, sufficient sequence information essential for catalysis is retained by the IRL in the context of the minicircle junction. These data confirm that the minicircle is an essential intermediate in the two-step transposition pathway of IS2.

ISLpl1 is a functional IS30-related insertion element in Lactobacillus plantarum that is also found in other lactic acid bacteria

We describe the first functional insertion sequence (IS) element in Lactobacillus plantarum. ISLpl1, an IS30-related element, was found on the pLp3 plasmid in strain FB335. By selection of spontaneous mutants able to grow in the presence of uracil, it was demonstrated that the IS had transposed into the uracil phosphoribosyltransferase-encoding gene upp on the FB335 chromosome. The plasmid-carried IS element was also sequenced, and a second potential IS element was found: ISLpl2, an IS150-related element adjacent to ISLpl1. When Southern hybridization was used, the copy number and genome (plasmid versus chromosome) distribution data revealed different numbers and patterns of ISLpl1-related sequences in different L. plantarum strains as well as in Pediococcus strains. The ISLpl1 pattern changed over many generations of the strain L. plantarum NCIMB 1406. This finding strongly supports our hypothesis that ISLpl1 is a mobile element in L. plantarum. Database analysis revealed five quasi-identical ISLpl1 elements in Lactobacillus, Pediococcus, and Oenococcus strains. Three of these elements may be cryptic IS, since point mutations or 1-nucleotide deletions were found in their transposase-encoding genes. In some cases, ISLpl1 was linked to genes involved in cold shock adaptation, bacteriocin production, sugar utilization, or antibiotic resistance. ISLpl1 is transferred among lactic acid bacteria (LAB) and may play a role in LAB genome plasticity and adaptation to their environment.

Escherichia coli insertion sequence IS150: transposition via circular and linear intermediates

IS150, a member of the widespread IS3 family, contains two consecutive out-of-phase open reading frames, orfA and orfB, that partially overlap. These open reading frames encode three proteins, InsA, InsB, and the InsAB protein, which is jointly encoded by both open reading frames by means of programmed translational frameshifting. We demonstrate that the InsAB protein represents the IS150 element's transposase. In vivo, the wild-type IS150 element generates circular excision products and linear IS150 molecules. Circular and linear species have previously been detected with mutant derivatives of other members of the IS3 family. Our finding supports the assumption that these products represent true transposition intermediates of members of this family. Analysis of the molecular nature of these two species suggested that the circular forms are precursors of the linear molecules. Elimination of InsA synthesis within the otherwise intact element led to accumulation of large amounts of the linear species, indicating that the primary role of InsA may be to prevent abortive production of the linear species and to couple generation of these species to productive insertion events.

Characterization of ISRgn1, a novel insertion sequence of the IS3 family isolated from a bacteriocin-negative mutant of Ruminococcus gnavus E1

ISRgn1, an insertion sequence of the IS3 family, has been identified in the genome of a bacteriocin-negative mutant of Ruminococcus gnavus E1. The copy number of ISRgn1 in R. gnavus E1, as well as its distribution among phylogenetically E1-related strains, has been determined. Results obtained suggest that ISRgn1 is not indigenous to the R. gnavus phylogenetic group but that it can transpose in this bacterium.

The basis of asymmetry in IS2 transposition

In the first step of IS2 transposition, the formation of an IS2 minicircle, the roles of the two IS ends differ. Terminal cleavage initiates exclusively at the right inverted repeat (IRR) - the donor end - whereas IRL is always the target. At the resulting minicircle junction, the two abutted ends are separated by a spacer of 1 or 2 basepairs. In this study, we have identified the determinants of donor and target function. The inability of IRL to act as a donor results largely from two sequence differences between IRL and IRR - an extra basepair between the conserved transposase binding sequences and the end of the element, and a change of the terminal dinucleotide from CA-3' to TA-3'. These two changes also impose a characteristic size on the minicircle junction spacer. The only sequences required for the efficient target function of IRL appear to be contained within the segment from position 11-42. Although IRR can function as a target, its shorter length and additional contacts with transposase (positions 1-7) result in minicircles with longer, and inappropriate, spacers. We propose a model for the synaptic complex in which the terminus of IRL makes different contacts with the transposase for the initial and final strand transfer steps. The sequence differences between IRR and IRL, and the behavioural characteristics of IRL that result from them, have probably been selected because they optimize expression of transposase from the minicircle junction promoter, Pjunc.

Characterisation of IS153, an IS3-family insertion sequence isolated from Lactobacillus sanfranciscensis and its use for strain differentiation

An insertion sequence has been identified in the genome of Lactobacillus sanfranciscensis DSM 20451T as segment of 1351 nucleotides containing 37-bp imperfect terminal inverted repeats. The sequence of this element encodes two out of phase, overlapping open reading frames, orfA and orfB, from which three putative proteins are produced. OrfAB is a transframe protein produced by -1 translational frame shifting between orf A and orf B that is presumed to be the transposase. The large orfAB of this element encodes a 342 amino acid protein that displays similarities with transposases encoded by bacterial insertion sequences belonging to the IS3 family. In L. sanfranciscensis type strain DSM 20451T multiple truncated IS elements were identified. Inverse PCR was used to analyze target sites of four of these elements, but except of their highly AT rich character not any sequence specificity was identified so far. Moreover, no flanking direct repeats were identified. Multiple copies of IS153 were detected by hybridization in other strains of L. sanfranciscensis. Resulting hybridization patterns were shown to differentiate between organisms at strain level rather than a probe targeted against the 16S rDNA. With a PCR based approach IS153 or highly similar sequences were detected in L. acidophilus, L. casei, L. malefermentans, L. plantarum, L. hilgardii, L. collinoides L. farciminis L. sakei and L. salivarius, L. reuteri as well as in Enterococcus faecium, Pediococcus acidilactici and P. pentosaceus.

Transposition of IS1397 in the family Enterobacteriaceae and first characterization of ISKpn1, a new insertion sequence associated with Klebsiella pneumoniae palindromic units

IS1397 and ISKpn1 are IS3 family members which are specifically inserted into the loop of palindromic units (PUs). IS1397 is shown to transpose into PUs with sequences close or identical to the Escherichia coli consensus, even in other enterobacteria (Salmonella enterica serovar Typhimurium, Klebsiella pneumoniae, and Klebsiella oxytoca). Moreover, we show that homologous intergenic regions containing PUs constitute IS1397 transpositional hot spots, despite bacterial interspersed mosaic element structures that differ among the three species. ISKpn1, described here for the first time, is specific for PUs from K. pneumoniae, in which we discovered it. A sequence comparison between the two insertion sequences allowed us to define a motif possibly accounting for their specificity.

Transposition in Lactobacillus sakei: inactivation of a second lactocin S operon by the insertion of IS1520, a new member of the IS3 family of insertion sequences

The analysis of spontaneous bacteriocin-negative mutants has led to the identification and characterization of a new, transpositionally active, insertion sequence of the IS3 family in the lactocin-S-producing Lactobacillus sakei strain L45. The element, which has been designated IS1520, is 1302 bp long with 10 bp perfect inverted repeat ends and generates direct repeats of a trinucleotide of target sequence upon transposition to the lactocin S locus. IS1520 encodes two consecutive, partially overlapping, major ORFs, which are frameshifted in a manner typical of the IS3 family. Despite a low overall DNA sequence similarity, the putative frameshifting region of IS1520 is highly similar to the corresponding region of IS1163, which is a related element previously shown to be active in L. sakei L45.

Reactivation of insertionally inactivated Shiga toxin 2 genes of Escherichia coli O157:H7 caused by nonreplicative transposition of the insertion sequence

IS1203v is an insertion sequence which has been found in inactivated Shiga toxin 2 genes of Escherichia coli O157:H7. We analyzed the transpositional mechanism of IS1203v in order to investigate whether the Shiga toxin 2 genes inactivated by IS1203v could revert to the wild type. When the transposase activity of IS1203v was enhanced by artificial frameshifting, IS1203v was obviously excised from the Shiga toxin 2 gene in a circular form. The IS1203v circle consisted of the entire IS1203v, but an extra 3-bp sequence (ATC) intervened between the 5' and 3' ends of IS1203v. The extra 3-bp sequence was identical to a direct repeat which was probably generated upon insertion. Moreover, we detected the Shiga toxin 2 gene with a precise excision of IS1203v. In the wild-type situation, the transposition products of IS1203v could be observed by PCR amplification. These results show that IS1203v can transpose in a nonreplicative manner and that the Shiga toxin gene inactivated by this insertion sequence can revert to the wild type.

IS1630 of Mycoplasma fermentans, a novel IS30-type insertion element that targets and duplicates inverted repeats of variable length and sequence during insertion

A new insertion sequence (IS) of Mycoplasma fermentans is described. This element, designated IS1630, is 1,377 bp long and has 27-bp inverted repeats at the termini. A single open reading frame (ORF), predicted to encode a basic protein of either 366 or 387 amino acids (depending on the start codon utilized), occupies most of this compact element. The predicted translation product of this ORF has homology to transposases of the IS30 family of IS elements and is most closely related (27% identical amino acid residues) to the product of the prototype of the group, IS30. Multiple copies of IS1630 are present in the genomes of at least two M. fermentans strains. Characterization and comparison of nine copies of the element revealed that IS1630 exhibits unusual target site specificity and, upon insertion, duplicates target sequences in a manner unlike that of any other IS element. IS1630 was shown to have the striking ability to target and duplicate inverted repeats of variable length and sequence during transposition. IS30-type elements typically generate 2- or 3-bp target site duplications, whereas those created by IS1630 vary between 19 and 26 bp. With the exception of two recently reported IS4-type elements which have the ability to generate variable large duplications (B. B. Plikaytis, J. T. Crawford, and T. M. Shinnick, J. Bacteriol. 180:1037-1043, 1998; E. M. Vilei, J. Nicolet, and J. Frey, J. Bacteriol. 181:1319-1323, 1999), such large direct repeats had not been observed for other IS elements. Interestingly, the IS1630-generated duplications are all symmetrical inverted repeat sequences that are apparently derived from rho-independent transcription terminators of neighboring genes. Although the consensus target site for IS30 is almost palindromic, individual target sites possess considerably less inverted symmetry. In contrast, IS1630 appears to exhibit an increased stringency for inverted repeat recognition, since the majority of target sites had no mismatches in the inverted repeat sequences. In the course of this study, an additional copy of the previously identified insertion sequence ISMi1 was cloned. Analysis of the sequence of this element revealed that the transposase encoded by this element is more than 200 amino acid residues longer and is more closely related to the products of other IS3 family members than had previously been recognized. A potential site for programmed translational frameshifting in ISMi1 was also identified.

Stimulation of transposition of the Mycobacterium tuberculosis insertion sequence IS6110 by exposure to a microaerobic environment

The Mycobacterium tuberculosis-specific insertion sequence IS6110/986 has been widely used as a probe because of the multiple polymorphism observed among different strains. To investigate transposition of IS6110, a series of artificially constructed composite transposons containing IS6110 and a kanamycin resistance marker were constructed. The composite transposons were inserted into a conditionally replicating, thermosensitive, Escherichia coli-mycobacterial shuttle vector and introduced into M. smegmatis mc2155. Lawns of transformants were grown at the permissive temperature on kanamycin-supplemented agar and subsequently prevented from further growth by shifting to the non-permissive temperature. Under normal atmospheric conditions, kanamycin-resistant papillae appeared after only about 5-6 weeks of incubation. However, these events were not associated with transposon mobilization. In contrast, lawns that were exposed to a 48 h microaerobic shock generated kanamycin-resistant papillae after only 6-14 days. These events were generated by conservative transposition of the IS6110 composite transposon into the M. smegmatis chromosome, with loss of the shuttle vector. In common with other IS3 family elements, transposition of IS6110 is thought to be controlled by translational frameshifting. However, we were unable to detect any significant frameshifting within the putative frameshifting site of IS6110, and the level of frameshifting was not affected by microaerobic incubation. The finding that transposition of IS6110 is stimulated by incubation at reduced oxygen tensions may be relevant to transposition of IS6110 in M. tuberculosis harboured within TB lesions.

Lac and lambda repressors relieve silencing of the Escherichia coli bgl promoter. Activation by alteration of a repressing nucleoprotein complex

The Escherichia coli bgl promoter is kept in a repressed state by silencer sequences which flank the promoter and by the histone-like protein H-NS. Silencing of the bgl promoter is likely due to the formation of a repressing nucleoprotein complex of which H-NS is an essential component. Here, we show that silencing is abolished by the binding of Lac or lambda repressors to their respective operators that were inserted within the bgl upstream silencer. Efficient activation of bgl operon transcription by Lac and lambda repressors was independent of the position and phasing of the operators with respect to the promoter. Activation by Lac and lambda repressors as shown here is unprecedented. We conclude that the activation of bgl transcription by both repressors is achieved by a novel mechanism, that is by alteration of the repressing nucleoprotein complex rather than by protein-protein interactions with RNA polymerase and the catabolite activator protein, CAP.

Multiple oligomerisation domains in the IS911 transposase: a leucine zipper motif is essential for activity

Structure-function relationships involved in oligomerisation of the transposase OrfAB of the bacterial insertion sequence IS911 have been investigated. Site-directed mutagenesis and sequential deletion coupled with immunoprecipitation have led to the definition of three regions of the protein capable of promoting multimerisation. These include a region predicted to assume a coiled-coil conformation, which is shown to be essential for activity, promoting correct multimerisation of the N-terminal domain of OrfAB and sequence-specific binding to the IS911 terminal inverted repeats mediated by this domain. This region presents the structural and functional characteristics of the leucine zipper motif described in eukaryotic proteins. The two other regions are located further towards the C-terminal end of the protein, adjacent to the leucine zipper and in the region that carries the conserved catalytic DD(35)E motif.

Cointegrase, a naturally occurring, truncated form of IS21 transposase, catalyzes replicon fusion rather than simple insertion of IS21

The bacterial insertion sequence IS21 contains two genes, istA and istB, which are organized as an operon. IS21 spontaneously forms tandem repeats designated (IS21)2. Plasmids carrying (IS21)2 react efficiently with other replicons, producing cointegrates via a cut-and-paste mechanism. Here we show that transposition of a single IS21 element (simple insertion) and cointegrate formation involving (IS21)2 result from two distinct non-replicative pathways, which are essentially due to two differentiated IstA proteins, transposase and cointegrase. In Escherichia coli, transposase was characterized as the full-length, 46 kDa product of the istA gene, whereas the 45 kDa cointegrase was expressed, in-frame, from a natural internal translation start of istA. The istB gene, which could be experimentally disconnected from istA, provided a helper protein that strongly stimulated the transposase and cointegrase-driven reactions. Site-directed mutagenesis was used to express either cointegrase or transposase from the istA gene. Cointegrase promoted replicon fusion at high frequencies by acting on IS21 ends which were linked by 2, 3, or 4 bp junction sequences in (IS21)2. By contrast, cointegrase poorly catalyzed simple insertion of IS21 elements. Transposase had intermediate, uniform activity in both pathways. The ability of transposase to synapse two widely spaced IS21 ends may reside in the eight N-terminal amino acid residues which are absent from cointegrase. Given the 2 or 3 bp spacing in naturally occurring IS21 tandems and the specialization of cointegrase, the fulminant spread of IS21 via cointegration can now be understood.

Insertion sequences

Insertion sequences (ISs) constitute an important component of most bacterial genomes. Over 500 individual ISs have been described in the literature to date, and many more are being discovered in the ongoing prokaryotic and eukaryotic genome-sequencing projects. The last 10 years have also seen some striking advances in our understanding of the transposition process itself. Not least of these has been the development of various in vitro transposition systems for both prokaryotic and eukaryotic elements and, for several of these, a detailed understanding of the transposition process at the chemical level. This review presents a general overview of the organization and function of insertion sequences of eubacterial, archaebacterial, and eukaryotic origins with particular emphasis on bacterial elements and on different aspects of the transposition mechanism. It also attempts to provide a framework for classification of these elements by assigning them to various families or groups. A total of 443 members of the collection have been grouped in 17 families based on combinations of the following criteria: (i) similarities in genetic organization (arrangement of open reading frames); (ii) marked identities or similarities in the enzymes which mediate the transposition reactions, the recombinases/transposases (Tpases); (iii) similar features of their ends (terminal IRs); and (iv) fate of the nucleotide sequence of their target sites (generation of a direct target duplication of determined length). A brief description of the mechanism(s) involved in the mobility of individual ISs in each family and of the structure-function relationships of the individual Tpases is included where available.

Negative regulation of IS2 transposition by the cyclic AMP (cAMP)-cAMP receptor protein complex

Three sequences similar to that of the consensus binding sequence of the cyclic AMP (cAMP)-cAMP receptor protein (CRP) complex were found in the major IS2 promoter region. Experiments were performed to determine whether the cAMP-CRP complex plays a role in the regulation of IS2 transposition. In the gel retardation assay, the cAMP-CRP complex was found to be able to bind the major IS2 promoter. A DNA footprinting assay confirmed that the cAMP-CRP complex binds to the sequences mentioned above. With an IS2 promoter-luciferase gene fusion construct, the cAMP-CRP complex was shown to inhibit transcription from the major IS2 promoter. IS2 was found to transpose at a frequency approximately 200-fold higher in an Escherichia coli host defective for CRP or adenyl cyclase than in a wild-type host. These results suggest that the cAMP-CRP complex is a negative regulator of IS2 transposition.

Growth phase dependent stop codon readthrough and shift of translation reading frame in Escherichia coli

Nonsense codon readthrough and changed translational reading frame were measured in different growth phases in E. coli. The strains used carry plasmid constructs with a translation assay reporter gene. This reporter gene contains an internal stop codon or a run of U-residues. Termination or frameshifting give rise to stable proteins that can be physically quantified on gels along with the complete protein products. Readthrough of the stop codon UGA by a nearcognate tRNA is several fold higher in active growth than in late exponential phase. In early exponential phase, about 7% of -1 frameshift at a U9 slippery sequence is detectable; upon entry to stationary phase this frameshifting increases to about 40% followed by a decrease in stationary phase. A similar increase is observed in the case of +1 reading frameshift at the U9 sequence, which increases from 13% in early exponential growth phase up to 38% at the beginning of stationary phase followed by a decrease. Thus, the levels of both stop codon readthrough and frameshifting are growth phase dependent, though not in an identical fashion.

A code in the protein coding genes

A statistical analysis with 12,288 autocorrelation functions applied in protein (coding) genes of prokaryotes and eukaryotes identifies three subsets of trinucleotides in their three frames: T0 = X0 [symbol: see text] {AAA, TTT} with X0 = {AAC, AAT, ACC, ATC, ATT, CAG, CTC, CTG, GAA, GAC, GAG, GAT, GCC, GGC, GGT, GTA, GTC, GTT, TAC, TTC} in frame 0 (the reading frame established by the ATG start trinucleotide), T1 = X1 [symbol: see text] {CCC} in frame 1 and T2 = X2 [symbol: see text] {GGG} in frame 2 (the frames 1 and 2 being the frame 0 shifted by one and two nucleotides, respectively, to the right). These three subsets are identical in these two gene populations and have five important properties: (i) the property of maximal (20 trinucleotides) circular code for X0 (resp. X1, X2) allowing to retrieve automatically the frame 0 (resp. 1, 2) in any region of the gene without start codon; (ii) the DNA complementarity property C (e.g. C(AAC) = GTT): C(T0) = T0, C(T1) = T2 and C(T2) = T1 allowing the two paired reading frames of a DNA double helix simultaneously to code for amino acids; (iii) the circular permutation property P (e.g. P(AAC) = ACA): P(X0) = X1 and P(X1) = X2 implying that the two subsets X1 and X2 can be deduced from X0; (iv) the rarity property with an occurrence probability of X0 = 6 x 10(-8); and (v) the concatenation properties in favour of an evolutionary code: a high frequency (27.5%) of misplaced trinucleotides in the shifted frames, a maximum (13 nucleotides) length of the minimal window to retrieve automatically the frame and an occurrence of the four types of nucleotides in the three trinucleotide sites. In Discussion, a simulation based on an independent mixing of the trinucleotides of T0 allows to retrieve the two subsets T1 and T2. Then, the identified subsets T0, T1 and T2 replaced in the 2-letter genetic alphabet {R, Y} (R = purine = A or G, Y = pyrimidine = C or T) allow to retrieve the RNY model (N = R or Y) and to explain previous works in the alphabet {R, Y}. Then, these three subsets are related to the genetic code. The trinucleotides of T0 code for 13 amino acids: Ala, Asn, Asp, Gln, Glu, Gly, Ile, Leu, Lys, Phe, Thr, Tyr and Val. Finally, a strong correlation between the usage of the trinucleotides of T0 in protein genes and the amino acid frequencies in proteins is observed as six among seven amino acids not coded by T0, have as expected the lowest frequencies in proteins of both prokaryotes and eukaryotes.

ISD1, an insertion element from the sulfate-reducing bacterium Desulfovibrio vulgaris Hildenborough: structure, transposition, and distribution

Insertion element ISD1, discovered when its transposition caused the insertional inactivation of an introduced sacB gene, is present in two copies in the genome of Desulfovibrio vulgaris Hildenborough. Southern blot analysis indicated at least two insertion sites in the sacB gene. Cloning and sequencing of a transposed copy of ISD1 indicated a length of 1,200 bp with a pair of 44-bp imperfect inverted repeats at the ends, flanked by a direct repeat of the 4-bp target sequence. AAGG and AATT were found to function as target sequences. ISD1 encodes a transposase from two overlapping open reading frames by programmed translational frameshifting at an A6G shifty codon motif. Sequence comparison showed that ISD1 belongs to the IS3 family. Isolation and analysis of the chromosomal copies, ISD1-A and ISD1-B, by PCR and sequencing indicated that these are not flanked by direct repeats. ISD1-A is inserted in a region of the chromosome containing the gapdh-pgk genes (encoding glyceraldehyde-3-phosphate dehydrogenase and phosphoglycerate kinase). Active transposition to other loci in the genome was demonstrated, offering the potential of a new tool for gene cloning and mutagenesis. ISD1 is the first transposable element described for the sulfate reducers, a large and environmentally important group of bacteria. The distribution of ISD1 in genomes of sulfate-reducing bacteria is limited. A single copy is present in the genome of D. desulfuricans Norway.

Structural probing and mutagenic analysis of the stem-loop required for Escherichia coli dnaX ribosomal frameshifting: programmed efficiency of 50%

Three elements are crucial for the programmed frameshifting in translation of dnaX mRNA: a Shine-Dalgarno (SD)-like sequence, a double-shift site, and a 3' structure. The conformation of the mRNA containing these three elements was investigated using chemical and enzymatic probes. The probing data show that the structure is a specific stem-loop. The bottom half of the stem is more stable than the top half of the stem. The function of the stem-loop was further investigated by mutagenic analysis. Reducing the stability of the bottom half of the stem strongly effects frameshifting levels, whereas similar changes in the top half are not as effective. Stabilizing the top half of the stem gives increased frameshifting beyond the WT efficiency. The identity of the primary RNA sequence in the stem-loop is unimportant, provided that the overall structure is maintained. The calculated stabilities of the variant stem-loop structures correlate with frameshifting efficiency. The SD-interaction and the stem-loop element act independently to increase frameshifting in dnaX.

Expression of a coronavirus ribosomal frameshift signal in Escherichia coli: influence of tRNA anticodon modification on frameshifting

Eukaryotic ribosomal frameshift signals generally contain two elements, a heptanucleotide slippery sequence (XXXYYYN) and an RNA secondary structure, often an RNA pseudoknot, located downstream. Frameshifting takes place at the slippery sequence by simultaneous slippage of two ribosome-bound tRNAs. All of the tRNAs that are predicted to decode frameshift sites in the ribosomal A-site (XXXYYYN) possess a hypermodified base in the anticodon-loop and it is conceivable that these modifications play a role in the frameshift process. To test this, we expressed slippery sequence variants of the coronavirus IBV frameshift signal in strains of Escherichia coli unable to modify fully either tRNA(Lys) or tRNA(Asn). At the slippery sequences UUUAAAC and UUUAAAU (underlined codon decoded by tRNA(Asn), anticodon 5' QUU 3'), frameshifting was very inefficient (2 to 3%) and in strains deficient in the biosynthesis of Q base, was increased (AAU) or decreased (AAC) only two-fold. In E. coli, therefore, hypomodification of tRNA(Asn) had little effect on frameshifting. The situation with the efficient slippery sequences UUUAAAA (15%) and UUUAAAG (40%) (underlined codon decoded by tRNA(Lys), anticodon 5' mnm5s2UUU 3') was more complex, since the wobble base of tRNA(Lys) is modified at two positions. Of four available mutants, only trmE (s2UUU) had a marked influence on frameshifting, increasing the efficiency of the process at the slippery sequence UUUAAAA. No effect on frameshifting was seen in trmC1 (cmnm5s2UUU) or trmC2 (nm5s2UUU) strains and only a very small reduction (at UUUAAAG) was observed in an asuE (mnm5UUU) strain. The slipperiness of tRNA(Lys), therefore, cannot be ascribed to a single modification site on the base. However, the data support a role for the amino group of the mnm5 substitution in shaping the anticodon structure. Whether these conclusions can be extended to eukaryotic translation systems is uncertain. Although E. coli ribosomes changed frame at the IBV signal (UUUAAAG) with an efficiency similar to that measured in reticulocyte lysates (40%), there were important qualitative differences. Frameshifting of prokaryotic ribosomes was pseudoknot-independent (although secondary structure dependent) and appeared to require slippage of only a single tRNA.

Bacterial interspersed mosaic elements (BIMEs) are a major source of sequence polymorphism in Escherichia coli intergenic regions including specific associations with a new insertion sequence

A significant fraction of Escherichia coli intergenic DNA sequences is composed of two families of repeated bacterial interspersed mosaic elements (BIME-1 and BIME-2). In this study, we determined the sequence organization of six intergenic regions in 51 E. coli and Shigella natural isolates. Each region contains a BIME in E. coli K-12. We found that multiple sequence variations are located within or near these BIMEs in the different bacteria. Events included excisions of a whole BIME-1, expansion/deletion within a BIME-2 and insertions of non-BIME sequences like the boxC repeat or a new IS element, named IS 1397. Remarkably, 14 out of IS 1397 integration sites correspond to a BIME sequence, strongly suggesting that this IS element is specifically associated with BIMEs, and thus inserts only in extragenic regions. Unlike BIMEs, IS 1397 is not detected in all E. coli isolates. Possible relationships between the presence of this IS element and the evolution of BIMEs are discussed.

Programmed translational frameshifting

Errors that alter the reading frame occur extremely rarely during translation, yet some genes have evolved sequences that efficiently induce frameshifting. These sequences, termed programmed frameshift sites, manipulate the translational apparatus to promote non-canonical decoding. Frameshifts are mechanistically diverse. Most cause a -1 shift of frames; the first such site was discovered in a metazoan retrovirus, but they are now known to be dispersed quite widely among evolutionarily diverse species. +1 frameshift sites are much less common, but again dispersed widely. The rarest form are the translational hop sites which program the ribosome to bypass a region of several dozen nucleotides. Each of these types of events are stimulated by distinct mechanisms. All of the events share a common phenomenology in which the programmed frameshift site causes the ribosome to pause during elongation so that the kinetically unfavorable alternative decoding event can occur. During this pause most frameshifts occur because one or more ribosome-bound tRNAs slip between cognate or near-cognate codons. However, even this generalization is not entirely consistent, since some frameshifts occur without slippage. Because of their similarity to rarer translational errors, programmed frameshift sites provide a tool with which to probe the mechanism of frame maintenance.

Detection of an IS2-encoded 46-kilodalton protein capable of binding terminal repeats of IS2

The genome of the transposable element IS2 contains five open reading frames that are capable of encoding proteins greater than 50 amino acids; however, only one IS2 protein of 14 kDa had been detected. By replacing the major IS2 promoter located in the right terminal repeat of IS2 with the T7 promoter to express IS2 genes, we have detected another IS2 protein of 46 kDa. This 46-kDa protein was designated InsAB'. Analyses of the InsAB' sequence revealed motifs that are characteristic of transposases of other transposable elements. InsAB' has the ability to bind both terminal repeat sequences of IS2. It was shown to bind a 27-bp sequence (5'-GTTAAGTGATAACAGATGTCTGGAAAT-3', positions 1316 to 1290 by our numbering system [16 to 42 by the previous numbering system]) located at the inner end of the right terminal repeat and a 31-bp sequence (5'-TTATTTAAGTGATATTGGTTGTCTGGAGATT-3', positions 46 to 16 [1286 to 1316]), including the last 27 bp of the inner end and the adjacent 4 bp of the left terminal repeat of IS2. This result suggests that InsAB' is a transposase of IS2. Since there is no open reading frame capable of encoding a 46-kDa protein in the entire IS2 genome, this 46-kDa protein is probably produced by a translational frameshifting mechanism.

The integrons In0, In2, and In5 are defective transposon derivatives

The class 1 integrons In0, In2, and In5, found in different locations in pVS1, Tn21, and pSCH884, have closely related structures. All three integrons contain an insertion sequence, IS1326, that is a new member of the IS21 family. IS1326 has caused deletions of adjacent 3'-conserved segment and transposition module sequences, and all three integrons retain a complete copy of only one of four genes required for transposition of related transposons and are thus defective transposon derivatives. In2 contains an additional insertion sequence, IS1353, located within IS1326. IS1353 is a member of the IS3 family and appears to have been acquired after the integron was inserted into an ancestral mercury resistance transposon to create the ancestor of Tn21 and several other transposons that are close relatives of Tn21.

The biallelic a mating type locus of Ustilago maydis: remnants of an additional pheromone gene indicate evolution from a multiallelic ancestor

The a mating type locus of Ustilago maydis contains the structural genes for a pheromone-based cell recognition system that governs fusion of haploid cells. The locus exists in two alleles, termed a1 and a2. We have completed the analysis of the nucleotide sequences unique to a1 and a2. Within these dissimilar regions we find two short patches of DNA sequence similarity. Interestingly, one of these segments corresponds to the transcribed region of the a1 pheromone precursor. As a result of multiple nucleotide exchanges this sequence does not code for a functional product. The existence of a second pheromone gene in the a2 allele suggests that the present locus had a multiallelic ancestor. In addition, we describe the presence of two additional genes in the a2 allele. We have investigated the role of these genes during mating and pathogenic development and speculate that they might affect mitochondrial inheritance.