Decellularized scaffolds as a platform for bioengineered organs

Region-specific brain decellularized extracellular matrix promotes cell recovery in an in vitro model of stroke

Brain decellularized extracellular matrix (ECM) can be an attractive scaffold capable of mimicking the native ecosystem of the central nervous system tissue. We studied the in vitro response of neural cultures exposed to region-specific brain decellularized ECM scaffolds from three distinct neuroanatomical sections: cortex, cerebellum and remaining areas. First, each brain region was evaluated with the isotropic fractionator method to understand the cellular composition of the different cerebral areas. Second, the cerebral regions were subjected to the decellularization process and their respective characterization using molecular, histological, and ultrastructural techniques. Third, the levels of neurotrophic factors in the decellularized brain scaffold were analyzed. Fourth, we studied the region-specific brain decellularized ECM as a mimetic platform for the maturation of PC12 cells, as a unidirectional model of differentiation. Finally, in vitro studies were carried out to evaluate the cell recovery capacity of brain decellularized ECM under stroke-mimetic conditions. Our results show that region-specific brain decellularized ECM can serve as a biomimetic scaffold capable of promoting the growth of neural lineage cells and, in addition, it possesses a combination of structural and biochemical signals (e.g., neurotrophic factors) that are capable of inducing cell phenotypic changes and promote viability and cell recovery in a stroke/ischemia model in vitro.

Thrombogenicity Assessment of Perfusable Tissue-Engineered Constructs: A Systematic Review

Vascular surgery is facing a critical demand for novel vascular grafts that are biocompatible and thromboresistant. This urgency is particularly applicable to bypass operations involving small caliber vessels. In the realm of tissue engineering, the development of fully vascularized organs is promising as a solution to organ shortage for transplantation. To achieve this, it is essential to (re)construct a biocompatible and nonthrombogenic vascular network within these organs. In this systematic review, we identify, classify, and discuss basic principles and methods used to perform in vitro/ex vivo dynamic thrombogenicity testing of perfusable tissue-engineered organs and tissues. We conducted a preregistered systematic review of studies published in the last 23 years according to PRISMA-P Guidelines. This comprised a systematic data extraction, in-depth analysis, and risk of bias assessment of 116 included studies. We identified shaking (n = 28), flow loop (n = 17), ex vivo (arteriovenous shunt, n = 33), and dynamic in vitro models (n = 38) as the main approaches for thrombogenicity assessment. This comprehensive review reveals a prevalent lack of standardization and provides a valuable guide in the design of standardized experimental setups.

Innovative approaches in lung tissue engineering: the role of exosome-loaded bioscaffolds in regenerative medicine

Lung diseases account for over four million premature deaths every year, and experts predict that this number will increase in the future. The top cause of death globally is diseases which include conditions like lung cancer asthma and COPD. Treating severe acute lung injury is a complex task because lungs struggle to heal themselves in the presence of swelling inflammation and scarring caused by damage, to the lung tissues. Though achieving lung regeneration, in controlled environments is still an ambition; ongoing studies are concentrating on notable progress, in the field of lung tissue engineering and methods for repairing lung damage. This review delves into methods, for regenerating lungs with a focus on exosome carry bioscaffolds and mesenchymal stem cells among others. It talks about how these new techniques can help repair lung tissue and improve lung function in cases of damage. Also noted is the significance of ex vivo lung perfusion (EVLP), for rejuvenating donor lungs and the healing properties of exosomes in supporting lung regeneration.

Mesenchymal stem cell therapy in diabetic foot ulcer: An updated comprehensive review

Background

Diabetes has evolved into a worldwide public health issue. One of the most serious complications of diabetes is diabetic foot ulcer (DFU), which frequently creates a significant financial strain on patients and lowers their quality of life. Up until now, there has been no curative therapy for DFU, only symptomatic relief or an interruption in the disease's progression. Recent studies have focused attention on mesenchymal stem cells (MSCs), which provide innovative and potential treatment candidates for several illnesses as they can differentiate into various cell types. They are mostly extracted from the placenta, adipose tissue, umbilical cord (UC), and bone marrow (BM). Regardless of their origin, they show comparable features and small deviations. Our goal is to investigate MSCs' therapeutic effects, application obstacles, and patient benefit strategies for DFU therapy.

Methodology

A comprehensive search was conducted using specific keywords relating to DFU, MSCs, and connected topics in the databases of Medline, Scopus, Web of Science, and PubMed. The main focus of the selection criteria was on English-language literature that explored the relationship between DFU, MSCs, and related factors.

Results and Discussion

Numerous studies are being conducted and have demonstrated that MSCs can induce re-epithelialization and angiogenesis, decrease inflammation, contribute to immunological modulation, and subsequently promote DFU healing, making them a promising approach to treating DFU. This review article provides a general snapshot of DFU (including clinical presentation, risk factors and etiopathogenesis, and conventional treatment) and discusses the clinical progress of MSCs in the management of DFU, taking into consideration the side effects and challenges during the application of MSCs and how to overcome these challenges to achieve maximum benefits.

Conclusion

The incorporation of MSCs in the management of DFU highlights their potential as a feasible therapeutic strategy. Establishing a comprehensive understanding of the complex relationship between DFU pathophysiology, MSC therapies, and related obstacles is essential for optimizing therapy outcomes and maximizing patient benefits.

Decellularized extracellular matrix biomaterials for regenerative therapies: Advances, challenges and clinical prospects

Tissue engineering and regenerative medicine have shown potential in the repair and regeneration of tissues and organs via the use of engineered biomaterials and scaffolds. However, current constructs face limitations in replicating the intricate native microenvironment and achieving optimal regenerative capacity and functional recovery. To address these challenges, the utilization of decellularized tissues and cell-derived extracellular matrix (ECM) has emerged as a promising approach. These biocompatible and bioactive biomaterials can be engineered into porous scaffolds and grafts that mimic the structural and compositional aspects of the native tissue or organ microenvironment, both in vitro and in vivo. Bioactive dECM materials provide a unique tissue-specific microenvironment that can regulate and guide cellular processes, thereby enhancing regenerative therapies. In this review, we explore the emerging frontiers of decellularized tissue-derived and cell-derived biomaterials and bio-inks in the field of tissue engineering and regenerative medicine. We discuss the need for further improvements in decellularization methods and techniques to retain structural, biological, and physicochemical characteristics of the dECM products in a way to mimic native tissues and organs. This article underscores the potential of dECM biomaterials to stimulate in situ tissue repair through chemotactic effects for the development of growth factor and cell-free tissue engineering strategies. The article also identifies the challenges and opportunities in developing sterilization and preservation methods applicable for decellularized biomaterials and grafts and their translation into clinical products.

Vascular reconstruction of the decellularized biomatrix for whole-organ engineering-a critical perspective and future strategies

Whole-organ re-engineering is the most challenging goal yet to be achieved in tissue engineering and regenerative medicine. One essential factor in any transplantable and functional tissue engineering is fabricating a perfusable vascular network with macro- and micro-sized blood vessels. Whole-organ development has become more practical with the use of the decellularized organ biomatrix (DOB) as it provides a native biochemical and structural framework for a particular organ. However, reconstructing vasculature and re-endothelialization in the DOB is a highly challenging task and has not been achieved for constructing a clinically transplantable vascularized organ with an efficient perfusable capability. Here, we critically and articulately emphasized factors that have been studied for the vascular reconstruction in the DOB. Furthermore, we highlighted the factors used for vasculature development studies in general and their application in whole-organ vascular reconstruction. We also analyzed in detail the strategies explored so far for vascular reconstruction and angiogenesis in the DOB for functional and perfusable vasculature development. Finally, we discussed some of the crucial factors that have been largely ignored in the vascular reconstruction of the DOB and the future directions that should be addressed systematically.

Stimuli-responsive hydrogels: smart state of-the-art platforms for cardiac tissue engineering

Biomedicine and tissue regeneration have made significant advancements recently, positively affecting the whole healthcare spectrum. This opened the way for them to develop their applications for revitalizing damaged tissues. Thus, their functionality will be restored. Cardiac tissue engineering (CTE) using curative procedures that combine biomolecules, biomimetic scaffolds, and cells plays a critical part in this path. Stimuli-responsive hydrogels (SRHs) are excellent three-dimensional (3D) biomaterials for tissue engineering (TE) and various biomedical applications. They can mimic the intrinsic tissues' physicochemical, mechanical, and biological characteristics in a variety of ways. They also provide for 3D setup, adequate aqueous conditions, and the mechanical consistency required for cell development. Furthermore, they function as competent delivery platforms for various biomolecules. Many natural and synthetic polymers were used to fabricate these intelligent platforms with innovative enhanced features and specialized capabilities that are appropriate for CTE applications. In the present review, different strategies employed for CTE were outlined. The light was shed on the limitations of the use of conventional hydrogels in CTE. Moreover, diverse types of SRHs, their characteristics, assembly and exploitation for CTE were discussed. To summarize, recent development in the construction of SRHs increases their potential to operate as intelligent, sophisticated systems in the reconstruction of degenerated cardiac tissues.

SAXS imaging reveals optimized osseointegration properties of bioengineered oriented 3D-PLGA/aCaP scaffolds in a critical size bone defect model

Healing large bone defects remains challenging in orthopedic surgery and is often associated with poor outcomes and complications. A major issue with bioengineered constructs is achieving a continuous interface between host bone and graft to enhance biological processes and mechanical stability. In this study, we have developed a new bioengineering strategy to produce oriented biocompatible 3D PLGA/aCaP nanocomposites with enhanced osseointegration. Decellularized scaffolds -containing only extracellular matrix- or scaffolds seeded with adipose-derived mesenchymal stromal cells were tested in a mouse model for critical size bone defects. In parallel to micro-CT analysis, SAXS tensor tomography and 2D scanning SAXS were employed to determine the 3D arrangement and nanostructure within the critical-sized bone. Both newly developed scaffold types, seeded with cells or decellularized, showed high osseointegration, higher bone quality, increased alignment of collagen fibers and optimal alignment and size of hydroxyapatite minerals.

Decellularized Extracellular Matrix Scaffolds for Cardiovascular Tissue Engineering: Current Techniques and Challenges

Cardiovascular diseases are the leading cause of global mortality. Over the past two decades, researchers have tried to provide novel solutions for end-stage heart failure to address cardiac transplantation hurdles such as donor organ shortage, chronic rejection, and life-long immunosuppression. Cardiac decellularized extracellular matrix (dECM) has been widely explored as a promising approach in tissue-regenerative medicine because of its remarkable similarity to the original tissue. Optimized decellularization protocols combining physical, chemical, and enzymatic agents have been developed to obtain the perfect balance between cell removal, ECM composition, and function maintenance. However, proper assessment of decellularized tissue composition is still needed before clinical translation. Recellularizing the acellular scaffold with organ-specific cells and evaluating the extent of cardiomyocyte repopulation is also challenging. This review aims to discuss the existing literature on decellularized cardiac scaffolds, especially on the advantages and methods of preparation, pointing out areas for improvement. Finally, an overview of the state of research regarding the application of cardiac dECM and future challenges in bioengineering a human heart suitable for transplantation is provided.

Bioengineering the Vascularized Endocrine Pancreas: A Fine-Tuned Interplay Between Vascularization, Extracellular-Matrix-Based Scaffold Architecture, and Insulin-Producing Cells

Intrahepatic islet transplantation is a promising β-cell replacement strategy for the treatment of type 1 diabetes. Instant blood-mediated inflammatory reactions, acute inflammatory storm, and graft revascularization delay limit islet engraftment in the peri-transplant phase, hampering the success rate of the procedure. Growing evidence has demonstrated that islet engraftment efficiency may take advantage of several bioengineering approaches aimed to recreate both vascular and endocrine compartments either ex vivo or in vivo. To this end, endocrine pancreas bioengineering is an emerging field in β-cell replacement, which might provide endocrine cells with all the building blocks (vascularization, ECM composition, or micro/macro-architecture) useful for their successful engraftment and function in vivo. Studies on reshaping either the endocrine cellular composition or the islet microenvironment have been largely performed, focusing on a single building block element, without, however, grasping that their synergistic effect is indispensable for correct endocrine function. Herein, the review focuses on the minimum building blocks that an ideal vascularized endocrine scaffold should have to resemble the endocrine niche architecture, composition, and function to foster functional connections between the vascular and endocrine compartments. Additionally, this review highlights the possibility of designing bioengineered scaffolds integrating alternative endocrine sources to overcome donor organ shortages and the possibility of combining novel immune-preserving strategies for long-term graft function.

Scaffold-based delivery of mesenchymal stromal cells to diabetic wounds

Foot ulceration is a major complication of diabetes mellitus, which results in significant human suffering and a major burden on healthcare systems. The cause of impaired wound healing in diabetic patients is multifactorial with contributions from hyperglycaemia, impaired vascularization and neuropathy. Patients with non-healing diabetic ulcers may require amputation, creating an urgent need for new reparative treatments. Delivery of stem cells may be a promising approach to enhance wound healing because of their paracrine properties, including the secretion of angiogenic, immunomodulatory and anti-inflammatory factors. While a number of different cell types have been studied, the therapeutic use of mesenchymal stromal cells (MSCs) has been widely reported to improve delayed wound healing. However, topical administration of MSCs via direct injection has several disadvantages, including low cell viability and poor cell localization at the wound bed. To this end, various biomaterial conformations have emerged as MSC delivery vehicles to enhance cell viability and persistence at the site of implantation. This paper discusses biomaterial-based MSCs therapies in diabetic wound healing and highlights the low conversion rate to clinical trials and commercially available therapeutic products.

Human Endothelial Cell Seeding in Partially Decellularized Kidneys

The excessive demand for organ transplants has promoted the development of strategies that increase the supply of immune compatible organs, such as xenotransplantation of genetically modified pig organs and the generation of bioartificial organs. We describe a method for the partial replacement of rat endothelial cells for human endothelial cells in a rat's kidney, obtaining as a final result a rat-human bioartificial kidney. First, in order to maintain parenchymal epithelial cells and selectively eliminate rat endothelial cells, three methods were evaluated in which different solutions were perfused through the renal artery: 0.1% sodium dodecyl sulfate (SDS), 0.01% SDS, and hyperosmolar solutions of sucrose. Then, partially decellularized kidneys were recellularized with human endothelial cells and finally transplanted in an anesthetized rat. The solution of 0.1% SDS achieved the highest vascular decellularization but with high degree of damage in the parenchyma side. On the contrary, 0.01% SDS and hyperosmolar solutions achieved a partial degree of endothelial decellularization. TUNEL assays reveal that hyperosmolar solutions maintained a better epithelial cell viability contrasting with 0.01% SDS. Partially decellularized kidneys were then recellularized with human endothelial cells. Histological analysis showed endothelial cells attached in almost all the vascular bed. Recellularized kidney was transplanted in an anesthetized rat. After surgery, recellularized kidney achieved complete perfusion, and urine was produced for at least 90 min posttransplant. Histological analysis showed endothelial cells attached in almost all the vascular bed. Therefore, endothelial decellularization of grafts and recellularization with human endothelial cells derived from transplant recipients can be a feasible method with the aim to reduce the damage of the grafts.

Small-diameter artery decellularization: Effects of anionic detergent concentration and treatment duration on porcine internal thoracic arteries

Engineered replacement materials have tremendous potential for vascular applications where over 400,000 damaged and diseased blood vessels are replaced annually in the United States alone. Unlike large diameter blood vessels, which are effectively replaced by synthetic materials, prosthetic small-diameter vessels are prone to early failure, restenosis, and reintervention surgery. We investigated the differential response of varying 0%-6% sodium dodecyl sulfate and sodium deoxycholate anionic detergent concentrations after 24 and 72 h in the presence of DNase using biochemical, histological, and biaxial mechanical analyses to optimize the decellularization process for xenogeneic vascular tissue sources, specifically the porcine internal thoracic artery (ITA). Detergent concentrations greater than 1% were successful at removing cytoplasmic and cell surface proteins but not DNA content after 24 h. A progressive increase in porosity and decrease in glycosaminoglycan (GAG) content was observed with detergent concentration. Augmented porosity was likely due to the removal of both cells and GAGs and could influence recellularization strategies. The treatment duration on the other hand, significantly improved decellularization by reducing DNA content to trace amounts after 72 h. Prolonged treatment times reduced laminin content and influenced the vessel's mechanical behavior in terms of altered circumferential stress and stretch while further increasing porosity. Collectively, DNase with 1% detergent for 72 h provided an effective and efficient decellularization strategy to be employed in the preparation of porcine ITAs as bypass graft scaffolding materials with minor biomechanical and histological penalties.

Transplantation of bioengineered liver capable of extended function in a preclinical liver failure model

Unlimited organ availability would represent a paradigm shift in transplantation. Long-term in vivo engraftment and function of scaled-up bioengineered liver grafts have not been previously reported. In this study, we describe a human-scale transplantable liver graft engineered on a porcine liver-derived scaffold. We repopulated the scaffold parenchyma with primary hepatocytes and the vascular system with endothelial cells. For in vivo functional testing, we performed auxiliary transplantation of the repopulated scaffold in pigs with induced liver failure. It was observed that the auxiliary bioengineered liver graft improved liver function for 28 days and exhibited upregulation of liver-specific genes. This study is the first of its kind to present 28 days of posttransplant evaluation of a bioengineered liver graft using a preclinical large animal model. Furthermore, it provides definitive evidence for the feasibility of engineering human-scale transplantable liver grafts for clinical applications.

Optimizing Decellularization Strategies for the Efficient Production of Whole Rat Kidney Scaffolds

BACKGROUND

Renal dysfunction remains a global issue, with chronic kidney disease being the 18th most leading cause of death, worldwide. The increased demands in kidney transplants, led the scientific society to seek alternative strategies, utilizing mostly the tissue engineering approaches. Unlike to perfusion decellularization of kidneys, we proposed alternative decellularization strategies to obtain acellular kidney scaffolds. The aim of this study was the evaluation of two different decellularization approaches for producing kidney bioscaffolds.

METHODS

Rat kidneys from Wistar rats, were submitted to decellularization, followed two different strategies. The decellularization solutions used in both approaches were the same and involved the use of 3-[(3-cholamidopropyl) dimethylammonio]-1-propanesulfonate and sodium dodecyl sulfate buffers for 12 h each, followed by incubation in a serum medium. Both approaches involved 3 decellularization cycles. Histological analysis, biochemical and DNA quantification were performed. Cytotoxicity assay and repopulation of acellular kidneys were also applied.

RESULTS

Histological, biochemical and DNA quantification confirmed that the 2nd approach had the best outcome regarding the kidney composition and cell elimination. Acellular kidneys from both approaches were successfully recellularized.

CONCLUSION

Based on the above data, the production of kidney scaffolds with the proposed cost- effective decellularization approaches, was efficient.

3D Printing: Advancement in Biogenerative Engineering to Combat Shortage of Organs and Bioapplicable Materials

ABSTRACT

Organ or cell transplantation is medically evaluated for end-stage failure saving or extending the lives of thousands of patients who are suffering from organ failure disorders. The unavailability of adequate organs for transplantation to meet the existing demand is a major challenge in the medical field. This led to day-day-increase in the number of patients on transplant waiting lists as well as in the number of patients dying while on the queue. Recently, technological advancements in the field of biogenerative engineering have the potential to regenerate tissues and, in some cases, create new tissues and organs. In this context, major advances and innovations are being made in the fields of tissue engineering and regenerative medicine which have a huge impact on the scientific community is three-dimensional bioprinting (3D bioprinting) of tissues and organs. Besides this, the decellularization of organs and using this as a scaffold for generating new organs through the recellularization process shows promising results. This review discussed about current approaches for tissue and organ engineering including methods of scaffold designing, recent advances in 3D bioprinting, organs regenerated successfully using 3D printing, and extended application of 3D bioprinting technique in the field of medicine. Besides this, information about commercially available 3D printers has also been included in this article.

LAY SUMMARY

Today's need for organs for the transplantation process in order to save a patient's life or to enhance the survival rate of diseased one is the prime concern among the scientific community. Recent, advances in the field of biogenerative engineering have the potential to regenerate tissues and create organs compatible with the patient's body. In this context, major advances and innovations are being made in the fields of tissue engineering and regenerative medicine which have a huge impact on the scientific community is three-dimensional bioprinting (3D bioprinting) of tissues and organs. Besides this, the decellularization of organs and using this as a scaffold for generating new organs through the recellularization process shows promising results. This review dealt with the current approaches for tissue and organ engineering including methods of scaffold designing, recent advances in 3D bioprinting, organs regenerated successfully using 3D printing, and extended application of 3D bioprinting technique in the field of medicine. Furthermore, information about commercially available 3D printers has also been included in this article.

A narrative overview of utilizing biomaterials to recapitulate the salient regenerative features of dental-derived mesenchymal stem cells

Tissue engineering approaches have emerged recently to circumvent many limitations associated with current clinical practices. This elegant approach utilizes a natural/synthetic biomaterial with optimized physiomechanical properties to serve as a vehicle for delivery of exogenous stem cells and bioactive factors or induce local recruitment of endogenous cells for in situ tissue regeneration. Inspired by the natural microenvironment, biomaterials could act as a biomimetic three-dimensional (3D) structure to help the cells establish their natural interactions. Such a strategy should not only employ a biocompatible biomaterial to induce new tissue formation but also benefit from an easily accessible and abundant source of stem cells with potent tissue regenerative potential. The human teeth and oral cavity harbor various populations of mesenchymal stem cells (MSCs) with self-renewing and multilineage differentiation capabilities. In the current review article, we seek to highlight recent progress and future opportunities in dental MSC-mediated therapeutic strategies for tissue regeneration using two possible approaches, cell transplantation and cell homing. Altogether, this paper develops a general picture of current innovative strategies to employ dental-derived MSCs combined with biomaterials and bioactive factors for regenerating the lost or defective tissues and offers information regarding the available scientific data and possible applications.

Cytokines secretion from human mesenchymal stem cells induced by bovine bone matrix

BACKGROUND

Bovine bone matrix is a natural material that has been used in the treatment of bone lesions. In this study, bovine bone matrix Nukbone® (NKB) was investigated due its osteoconductive and osteoinductive properties. This biomaterial induces CBFA-1 activation and osteogenic differentiation, although the cytokines involved in these processes is still unknown.

OBJECTIVE

The aim of this work was to determine the influence of NKB on the pro-osteoblastic and anti-osteoblastic cytokines secretion from human mesenchymal stem cells (hMSCs).

METHODS

The hMSCs were cultured onto NKB and cytokines IL-2, IL-4, IL-6, IL-10, IL-12, IFN-γ and TNF-α were analized at 0-14 days by immunoassay. In addition, hemocompatibility of NKB and characterization of hMSCs were evaluated.

RESULTS

NKB induces an increase on pro-osteoblastic cytokine secretion IL-4 and a decrease on anti-osteoblastic cytokine IL-6 secretion, at days 7 and 14 of cell culture. Interestingly, there was no statistical difference between secretion profiles of others cytokines analized.

CONCLUSIONS

The up-regulation of IL-4 and down-regulation of IL-6, and the secretion profiles of other cytokines examined in this work, are findings that will contribute to the understanding of the role of NKB, and similar biomaterials, in bone homeostasis and in the osteoblastic differentiation of hMSCs.

Factors to consider when interrogating 3D culture models with plate readers or automated microscopes

Along with the increased use of more physiologically relevant three-dimensional cell culture models comes the responsibility of researchers to validate new assay methods that measure events in structures that are physically larger and more complex compared to monolayers of cells. It should not be assumed that assays designed using monolayers of cells will work for cells cultured as larger three-dimensional masses. The size and barriers for penetration of molecules through the layers of cells result in a different microenvironment for the cells in the outer layer compared to the center of three-dimensional structures. Diffusion rates for nutrients and oxygen may limit metabolic activity which is often measured as a marker for cell viability. For assays that lyse cells, the penetration of reagents to achieve uniform cell lysis must be considered. For live cell fluorescent imaging assays, the diffusion of fluorescent probes and penetration of photons of light for probe excitation and fluorescent emission must be considered. This review will provide an overview of factors to consider when implementing assays to interrogate three dimensional cell culture models.

Reconstitution of a functional human thymus by postnatal stromal progenitor cells and natural whole-organ scaffolds

The thymus is a primary lymphoid organ, essential for T cell maturation and selection. There has been long-standing interest in processes underpinning thymus generation and the potential to manipulate it clinically, because alterations of thymus development or function can result in severe immunodeficiency and autoimmunity. Here, we identify epithelial-mesenchymal hybrid cells, capable of long-term expansion in vitro, and able to reconstitute an anatomic phenocopy of the native thymus, when combined with thymic interstitial cells and a natural decellularised extracellular matrix (ECM) obtained by whole thymus perfusion. This anatomical human thymus reconstruction is functional, as judged by its capacity to support mature T cell development in vivo after transplantation into humanised immunodeficient mice. These findings establish a basis for dissecting the cellular and molecular crosstalk between stroma, ECM and thymocytes, and offer practical prospects for treating congenital and acquired immunological diseases.

Peroxidasin is essential for endothelial cell survival and growth signaling by sulfilimine crosslink-dependent matrix assembly

Peroxidasin (PXDN) has been reported to crosslink the C-terminal non-collagenous domains of collagen IV (Col IV) by forming covalent sulfilimine bond. Here, we explored the physiological role of PXDN and its mechanism of action in endothelial cell survival and growth. Silencing of PXDN using siRNAs decreased cell proliferation without increase of the number of detached cells and decreased cell viability under serum-starved condition with increased fragmented nuclei and caspase 3/7 activity. Conditioned medium (CM) containing wild-type PXDN restored the proliferation of PXDN-depleted cells, but CM containing mutant PXDN with deletion of either N-terminal extracellular matrix (ECM) motifs or peroxidase domain failed to restore PXDN function. Accordingly, anti-PXDN antibody [raised against IgC2 (3-4) subdomain within ECM motifs] and peroxidase inhibitor phloroglucinol prevented the rescue of the PXDN-depleted cells by PXDN-containing CM. PXDN depletion resulted in loss of sulfilimine crosslinks, and decreased dense fibrillar network assembly of not only Col IV, but also fibronectin and laminin like in Col IV knockdown. Exogenous PXDN-containing CM restored ECM assembly as well as proliferation of PXDN-depleted cells. Accordingly, purified recombinant PXDN protein restored the proliferation and ECM assembly, and prevented cell death of the PXDN-depleted cells. PXDN depletion also showed reduced growth factors-induced phosphorylation of FAK and ERK1/2. In addition, siPXDN-transfected cell-derived matrix failed to provide full ECM-mediated activation of FAK and ERK1/2. These results indicate that both the ECM motifs and peroxidase activity are essential for the cellular function of PXDN and that PXDN is crucial for ECM assembly for survival and growth signaling.

Bioengineering the ovary to preserve and reestablish female fertility

Different bioengineering strategies can be presently adopted and have been shown to have great potential in the treatment of female infertility and ovarian dysfunction deriving from chemotherapy, congenital malformations, massive adhesions as well as aging and lifestyle. One option is transplantation of fresh or cryopreserved organs/fragments into the patient. A further possibility uses tissue engineering approaches that involve a combination of cells, biomaterials and factors that stimulate local ability to regenerate/ repair the reproductive organ. Organ transplant has shown promising results in large animal models. However, the source of the organ needs to be identified and the immunogenic effects of allografts remain still to be solved before the technology may enter the clinical practice. Decellularization/ repopulation of ovary with autologous cells or follicles could represent an interesting, still very experimental alternative. Here we summarize the recent advancements in the bioengineering strategies applied to the ovary, we present the principles for these systems and discuss the advantages of these emerging opportunities to preserve or improve female fertility.

Young at Heart: Combining Strategies to Rejuvenate Endogenous Mechanisms of Cardiac Repair

True cardiac regeneration of the injured heart has been broadly described in lower vertebrates by active replacement of lost cardiomyocytes to functionally and structurally restore the myocardial tissue. On the contrary, following severe injury (i.e., myocardial infarction) the adult mammalian heart is endowed with an impaired reparative response by means of meager wound healing program and detrimental remodeling, which can lead over time to cardiomyopathy and heart failure. Lately, a growing body of basic, translational and clinical studies have supported the therapeutic use of stem cells to provide myocardial regeneration, with the working hypothesis that stem cells delivered to the cardiac tissue could result into new cardiovascular cells to replenish the lost ones. Nevertheless, multiple independent evidences have demonstrated that injected stem cells are more likely to modulate the cardiac tissue via beneficial paracrine effects, which can enhance cardiac repair and reinstate the embryonic program and cell cycle activity of endogenous cardiac stromal cells and resident cardiomyocytes. Therefore, increasing interest has been addressed to the therapeutic profiling of the stem cell-derived secretome (namely the total of cell-secreted soluble factors), with specific attention to cell-released extracellular vesicles, including exosomes, carrying cardioprotective and regenerative RNA molecules. In addition, the use of cardiac decellularized extracellular matrix has been recently suggested as promising biomaterial to develop novel therapeutic strategies for myocardial repair, as either source of molecular cues for regeneration, biological scaffold for cardiac tissue engineering or biomaterial platform for the functional release of factors. In this review, we will specifically address the translational relevance of these two approaches with ad hoc interest in their feasibility to rejuvenate endogenous mechanisms of cardiac repair up to functional regeneration.

Hybrid cardiovascular sourced extracellular matrix scaffolds as possible platforms for vascular tissue engineering

The aim when designing a scaffold is to provide a supportive microenvironment for the native cells, which is generally achieved by structurally and biochemically imitating the native tissue. Decellularized extracellular matrix (ECM) possesses the mechanical and biochemical cues designed to promote native cell survival. However, when decellularized and reprocessed, the ECM loses its cell supporting mechanical integrity and architecture. Herein, we propose dissolving the ECM into a polymer/solvent solution and electrospinning it into a fibrous sheet, thus harnessing the biochemical cues from the ECM and the mechanical integrity of the polymer. Bovine aorta and myocardium were selected as ECM sources. Decellularization was achieved using sodium dodecyl sulfate (SDS), and the ECM was combined with polycaprolactone and hexafluoro-2-propanol for electrospinning. The scaffolds were seeded with human umbilical vein endothelial cells (HUVECs). The study found that the inclusion of aorta ECM increased the scaffold's wettability and subsequently lead to increased HUVEC adherence and proliferation. Interestingly, the inclusion of myocardium ECM had no effect on wettability or cell viability. Furthermore, gene expression and mechanical changes were noted with the addition of ECM. The results from this study show the vast potential of electrospun ECM/polymer bioscaffolds and their use in tissue engineering.

A Hepatic Scaffold from Decellularized Liver Tissue: Food for Thought

Allogeneic liver transplantation is still deemed the gold standard solution for end-stage organ failure; however, donor organ shortages have led to extended waiting lists for organ transplants. In order to overcome the lack of donors, the development of new therapeutic options is mandatory. In the last several years, organ bioengineering has been extensively explored to provide transplantable tissues or whole organs with the final goal of creating a three-dimensional growth microenvironment mimicking the native structure. It has been frequently reported that an extracellular matrix-based scaffold offers a structural support and important biological molecules that could help cellular proliferation during the recellularization process. The aim of the present review is to underline the recent developments in cell-on-scaffold technology for liver bioengineering, taking into account: (1) biological and synthetic scaffolds; (2) animal and human tissue decellularization; (3) scaffold recellularization; (4) 3D bioprinting; and (5) organoid technology. Future possible clinical applications in regenerative medicine for liver tissue engineering and for drug testing were underlined and dissected.

Effect of normal saline flush injection into a bronchus on lung decellularization

BACKGROUND

The aim of this study was to evaluate effect of normal saline flush injection into bronchus on creation of decellularized lung scaffolds.

METHODS

Pigs were used: 3 lung grafts for decellularization with pre-treatment of normal saline injection into a bronchus, 3 for decellularization without pre-treatment and 3 treated as normal controls. We compared the characteristics of lung scaffolds created by each method.

RESULTS

The pretreatment procedure significantly reduced the DNA content of lung grafts, suggesting effective removal of cellular components. However, this pretreatment also reduced the elastin contents of lung grafts.

CONCLUSIONS

Considering this characteristic of saline pretreatment, we must continue to look for better methods to produce ideal decellularized lung grafts.

A Novel Protocol to Generate Decellularized Bovine Spinal Cord Extracellular Matrix-Based Scaffolds (3D-dCBS)

Extracellular matrix (ECM)-based tissue engineering scaffolds have an essential role in promoting tissue regeneration. Nerve tissue engineering aims at facilitating the repair of permanent damage to the peripheral and central nervous systems, which are difficult to heal. For this purpose, a variety of biomaterials are being developed consisting of numerous synthetic and/or natural polymers to provide axonal reinnervation and to direct the growth of axons. Here, we present a novel protocol that enables to fabricate a 3-dimensional (3D) decellularized scaffold derived from the bovine spinal cord (BSC) ECM (3D-dCBS) for neural tissue engineering applications. In this protocol, a viscous ECM-derived gel from BSC is prepared, molded, and chemically crosslinked with EDC/NHS (3D-CBS) before decellularization process. Decellularization of 3D-CBS is performed with 1% SDS to attain 3D-dCBS. As compared with other available methods, our protocol is a novel decellularization method that preserves a more significant part of the ECM. We believe that the mentioned protocol has the potential to produce a bioengineered scaffold from spinal cord tissue with desired geometry for regenerative medicine applications related to neural tissue engineering.

Cardiac tissue-derived extracellular matrix scaffolds for myocardial repair: advantages and challenges

Decellularized extracellular matrix (dECM) derived from myocardium has been widely explored as a nature scaffold for cardiac tissue engineering applications. Cardiac dECM offers many unique advantages such as preservation of organ-specific ECM microstructure and composition, demonstration of tissue-mimetic mechanical properties and retention of biochemical cues in favor of subsequent recellularization. However, current processes of dECM decellularization and recellularization still face many challenges including the need for balance between cell removal and extracellular matrix preservation, efficient recellularization of dECM for obtaining homogenous cell distribution, tailoring material properties of dECM for enhancing bioactivity and prevascularization of thick dECM. This review summarizes the recent progresses of using dECM scaffold for cardiac repair and discusses its major advantages and challenges for producing biomimetic cardiac patch.

Current research trends and challenges in tissue engineering for mending broken hearts

Cardiovascular disease (CVD) is among the leading causes of mortality worldwide. The shortage of donor hearts to treat end-stage heart failure patients is a critical problem. An average of 3500 heart transplant surgeries are performed globally, half of these transplants are performed in the US alone. Stem cell therapy is growing rapidly as an alternative strategy to repair or replace the damaged heart tissue after a myocardial infarction (MI). Nevertheless, the relatively poor survival of the stem cells in the ischemic heart is a major challenge to the therapeutic efficacy of stem-cell transplantation. Recent advancements in tissue engineering offer novel biomaterials and innovative technologies to improve upon the survival of stem cells as well as to repair the damaged heart tissue following a myocardial infarction (MI). However, there are several limitations in tissue engineering technologies to develop a fully functional, beating cardiac tissue. Therefore, the main goal of this review article is to address the current advancements and barriers in cardiac tissue engineering to augment the survival and retention of stem cells in the ischemic heart.

Immunogenicity analysis of decellularized cardiac scaffolds after transplantation into rats

Aim: Cardiac extracellular matrix (cECM) scaffolds are promising biomaterials for clinical applications. Our aim is to determine the immunogenicity of decellularized scaffolds from different sources for use as artificial organs during organ transplantation. Materials & methods: We transplanted Lewis rats with syngeneic (Lewis rat cECM), allogeneic (BN rat cECM) or xenogeneic (hamster cECM) decellularized cardiac scaffolds. Acute vascular and cellular rejection was quantified by immunohistochemistry and immune cell infiltration. Results: BN rat and hamster hearts were rejected following transplantation. BN and hamster cECMs had similarly low immunogenicity compared with Lewis rat cECMs and did not lead to increased rejection. Conclusion: We found that scaffolds from all sources did not induce vascular or cellular rejection and exhibited low immunogenicity.

Efficient methodology for the extraction and analysis of lipids from porcine pulmonary artery by supercritical fluid chromatography coupled to mass spectrometry

Pulmonary artery grafts are needed as cardiovascular bioprosthetics. For successful tissue recellularization after transplantation, lipids have to be removed from the donor artery. Developing a selective process to remove lipids without damaging the extracellular matrix greatly depends on knowing the amount and type of lipid compounds in the specific tissue. Here we present an efficient methodology for the study of lipids present in porcine pulmonary arteries. The performance of six extraction methods to recover lipids from artery was evaluated. For this purpose, a supercritical fluid chromatography method coupled to quadrupole time-of-flight mass spectrometry detection (UHPSFC/QTOF-MS) was adapted. The method enabled separation of lipids of a wide range of polarity according to lipid class in less than 7 min. One dichloromethane-based extraction method was shown to be the most efficient one for the recovery of lipids from pulmonary artery. However, one MTBE-based extraction method was able to show the highest fatty acid extraction yields (to the expense of longer extraction times). Lipids were relative quantified according to class, and the major species within each class were identified. Triacylglycerols and glycerophospholipids were the most abundant classes, followed by sphingomyelins, monoacylglycerols and fatty acyls. The matrix effect exerted no interference on the analytical method, except for some few combinations of extraction method and lipid class. These results are of relevance for lipidomic studies from solid tissue, in particular for studies on pulmonary and cardiovascular diseases. Finally, our work sets the basis for the further development of a selective processes to remove lipids from pulmonary artery without damaging the tissue prior to transplantation.

Decellularization of rat adipose tissue, diaphragm, and heart: a comparison of two decellularization methods

Decellularization is a process that involves the removal of cellular material from the tissues and organs while maintaining the structural, functional, and mechanical properties of extracellular matrix. The purpose of this study was to carry out decellularization of rat adipose tissue, diaphragm, and heart by using two different methods in order to compare their efficiency and investigate proliferation profiles of rat adipose-tissue-derived mesenchymal stem cells (AdMSCs) on these scaffolds. Tissues were treated with an optimized detergent-based decellularization (Method A) and a freeze-and-thaw-based decellularization (Method B). AdMSCs were then seeded on scaffolds having a density of 2 × 10⁵ cells/scaffold and AO/PI double-staining and MTT assays were performed in order to determine cell viability. In this study, which is the first research comparing two methods of decellularization of an adipose tissue, diaphragm, and heart scaffolds with AdMSCs, Method A provided efficient decellularization in these three tissues and it was shown that these porous scaffolds were cyto-compatible for the cells. Method B caused severe tissue damage in diaphragm and insufficient decellularization in heart whereas it also resulted in cyto-compatible adipose tissue scaffolds.

Rebuilding a better home for transplanted islets

Diabetes can be treated with β cell replacement therapy, where a patient is transplanted with cadaveric human islets to restore glycemic control. Despite this being an effective treatment, the process of isolating islets from the pancreas requires collagenase digestion which disrupts the islet extracellular matrix (ECM) and activates anoikis-mediated apoptosis. To improve islet survival in culture and after transplantation, the islet microenvironment may be enhanced with the addition of ECM components which are lost during isolation. Furthermore, novel β cell replacement strategies, such as stem cell-derived beta cell (SCβC) treatments or alternative transplant sites and devices, could benefit from a better understanding of how β cells interact with ECM. In this mini-review, we discuss the current understanding of the pancreas and islet ECM composition and review decellularization approaches to generate a native pancreatic ECM scaffold for use in both islet and SCβC culture and transplantation.

Cardiac tissue engineering: current state-of-the-art materials, cells and tissue formation

Cardiovascular diseases are the major cause of death worldwide. The heart has limited capacity of regeneration, therefore, transplantation is the only solution in some cases despite presenting many disadvantages. Tissue engineering has been considered the ideal strategy for regenerative medicine in cardiology. It is an interdisciplinary field combining many techniques that aim to maintain, regenerate or replace a tissue or organ. The main approach of cardiac tissue engineering is to create cardiac grafts, either whole heart substitutes or tissues that can be efficiently implanted in the organism, regenerating the tissue and giving rise to a fully functional heart, without causing side effects, such as immunogenicity. In this review, we systematically present and compare the techniques that have drawn the most attention in this field and that generally have focused on four important issues: the scaffold material selection, the scaffold material production, cellular selection and in vitro cell culture. Many studies used several techniques that are herein presented, including biopolymers, decellularization and bioreactors, and made significant advances, either seeking a graft or an entire bioartificial heart. However, much work remains to better understand and improve existing techniques, to develop robust, efficient and efficacious methods.

β Cell Replacement Therapy: The Next 10 Years

β cell replacement with either pancreas or islet transplantation has progressed immensely over the last decades with current 1- and 5-year insulin independence rates of approximately 85% and 50%, respectively. Recent advances are largely attributed to improvements in immunosuppressive regimen, donor selection, and surgical technique. However, both strategies are compromised by a scarce donor source. Xenotransplantation offers a potential solution by providing a theoretically unlimited supply of islets, but clinical application has been limited by concerns for a potent immune response against xenogeneic tissue. β cell clusters derived from embryonic or induced pluripotent stem cells represent another promising unlimited source of insulin producing cells, but clinical application is pending further advances in the function of the β cell like clusters. Exciting developments and rapid progress in all areas of β cell replacement prompted a lively debate by members of the young investigator committee of the International Pancreas and Islet Transplant Association at the 15th International Pancreas and Islet Transplant Association Congress in Melbourne and at the 26th international congress of The Transplant Society in Hong Kong. This international group of young investigators debated which modality of β cell replacement would predominate the landscape in 10 years, and their arguments are summarized here.

Application of adult mesenchymal stem cells in bone and vascular tissue engineering

Tissue engineering is a very promising field of regenerative medicine. Life expectancy has been increasing, and tissue replacement is increasingly needed in patients suffering from various degenerative disorders of the organs. The use of adult mesenchymal stem cells (e.g. from adipose tissue or from bone marrow) in tissue engineering seems to be a promising approach for tissue replacements. Clinical applications can make direct use of the large secretome of these cells, which can have a positive influence on other cells around. Another advantage of adult mesenchymal stem cells is the possibility to differentiate them into various mature cells via appropriate culture conditions (i.e. medium composition, biomaterial properties, and dynamic conditions). This review is focused on current and future ways to carry out tissue replacement of damaged bones and blood vessels, especially with the use of suitable adult mesenchymal stem cells as a potential source of differentiated mature cells that can later be used for tissue replacement. The advantages and disadvantages of different stem cell sources are discussed, with a main focus on adipose-derived stem cells. Patient factors that can influence later clinical applications are taken into account.

Rapid Protocol of Porcine Kidney Decellularization

Chronic kidney disease is a problem that has grown in recent decades worldwide. The National Kidney Foundation (NKF) estimates that the number of patients will double in the next 10 years. Dialysis and kidney transplantation are the treatments used for chronic kidney disease. There is hope in slowing down chronic kidney disease or even stopping its progression. Bioengineering and cell therapy are the main fields in kidney regeneration research using three-dimensional matrices in which cells are cultured, an ideal solution for scarcity organs for kidney transplantation. The difficulty in re-creating a functional kidney due to the complexity of its three-dimensional structure and its composition of different cell types and that can be incorporated in vivo with low immunogenicity is a very difficult task. Therefore, the aim of the present study was to meet the enormous demand for new treatments, developing strategies of tissue engineering on the basis of the decellularization of the porcine kidney performed through a new cell removal protocol. We determined the effective removal of cells by histologic and immunohistochemical analyses, showing the preservation of type IV collagen and fibronectin. Therefore, this method is a quick way to obtain decellularized porcine kidneys for future recellularization studies.

Quantifying extracellular matrix turnover in human lung scaffold cultures

Remodelling of the extracellular matrix is accomplished by altering the balance between matrix macromolecule production and degradation. However, it is not well understood how cells balance production of new matrix molecules and degradation of existing ones during tissue remodelling and regeneration. In this study, we used decellularized lung scaffolds repopulated with allogenic lung fibroblasts cultured with stable isotope labelled amino acids to quantify the balance between matrix production and degradation at a proteome-wide scale. Specific temporal dynamics of different matrisome proteins were found to correspond to the proliferative activity of the repopulating cells and the degree of extracellular deposition. The remodeling of the scaffold was characterized by an initial phase with cell proliferation and high production of cell adhesion proteins such as emilin-1 and fibronectin. Extended culture time resulted in increased levels of core matrisome proteins. In a comparison with monolayer cultures on plastic, culture in lung scaffolds lead to a pronounced accumulation of proteoglycans, such as versican and decorin, resulting in regeneration of an extracellular matrix with greater resemblance to native lung tissue compared to standard monolayer cultures. Collectively, the study presents a promising technique for increasing the understanding of cell- extracellular matrix interactions under healthy and diseased conditions.

Mechanistics of biomass discharge during whole-heart decellularization

Whole-organ engineering-based on the functional repopulation of acellular whole-organ scaffolds derived from perfusion-based in toto decellularization of the specific organ system-is one of the most promising fields in tissue engineering. However, to date, we still have hardly any insights into the process of perfusion-based scaffold generation itself, with human-scale scaffolds usually obtained by adoption of small animal decellularization models, although those organs are of decreased biomass and potentially different biological characteristics. Therefore, in this study we analyzed perfusion-based human-scale whole-heart decellularization by evaluating and comparing the dynamics of biomass discharge and its kinetic characteristics during in toto decellularization of ovine and rodent hearts, while introducing a theoretical model of biomass depletion during perfusion-based whole-heart decellularization. Our results suggest highly varying process characteristics for the in toto decellularization of individual human-scale organs, such as protein discharge kinetics or time-dependent viscoelasticity of formed debris, despite seemingly consistent inter-sample decellularization efficacy, as evaluated by conventional disruptive analysis of obtained ECM scaffolds. Hence, the here exposed insights into the mechanistics of whole-heart decellularization as well as the introduced non-disruptive process accompanying tools may help to monitor and further optimize the decellularization process, especially with regards to human-scale scaffold production.

Evaluation of a Miniaturized Biologically Vascularized Scaffold in vitro and in vivo

In tissue engineering, the generation and functional maintenance of dense voluminous tissues is mainly restricted due to insufficient nutrient supply. Larger three-dimensional constructs, which exceed the nutrient diffusion limit become necrotic and/or apoptotic in long-term culture if not provided with an appropriate vascularization. Here, we established protocols for the generation of a pre-vascularized biological scaffold with intact arterio-venous capillary loops from rat intestine, which is decellularized under preservation of the feeding and draining vascular tree. Vessel integrity was proven by marker expression, media/blood reflow and endothelial LDL uptake. In vitro maintenance persisted up to 7 weeks in a bioreactor system allowing a stepwise reconstruction of fully vascularized human tissues and successful in vivo implantation for up to 4 weeks, although with time-dependent decrease of cell viability. The vascularization of the construct lead to a 1.5× increase in cellular drug release compared to a conventional static culture in vitro. For the first time, we performed proof-of-concept studies demonstrating that 3D tissues can be maintained within a miniaturized vascularized scaffold in vitro and successfully implanted after re-anastomosis to the intrinsic blood circulation in vivo. We hypothesize that this technology could serve as a powerful platform technology in tissue engineering and regenerative medicine.