Production and implantation of renal extracellular matrix scaffolds from porcine kidneys as a platform for renal bioengineering investigations

Current strategies on kidney regeneration using tissue engineering approaches: a systematic review

INTRODUCTION

Over the past two decades, there has been a notable rise in the number of individuals afflicted with End-Stage Renal Disease, resulting in an increased demand for renal replacement therapies. While periodic dialysis is beneficial, it can negatively impact a patient's quality of life and does not fully replicate the secretory functions of the kidneys. Additionally, the scarcity of organ donors and complications associated with organ transplants have underscored the importance of tissue engineering. Regenerative medicine is revolutionized by developing decellularized organs and tissue engineering, which is considered a cutting-edge area of study with enormous potential. Developing bioengineered kidneys using tissue engineering approaches for renal replacement therapy is promising.

METHOD AND MATERIALS

We aimed to systematically review the essential preclinical data to promote the translation of tissue engineering research for kidney repair from the laboratory to clinical practice. A PubMed search strategy was systematically implemented without any linguistic restrictions. The assessment focused on complete circumferential and inlay procedures, thoroughly evaluating parameters such as cell seeding, decellularization techniques, recellularization protocols, and biomaterial types.

RESULTS

Of the 1,484 studies retrieved from the following primary searches, 105 were included. Kidneys were harvested from eight different species. Nine studies performed kidney decellularization from discarded human kidneys. Sixty-four studies performed whole organ decellularization. Some studies used acellular scaffolds to produce hydrogels, sheets, and solutions. Decellularization is achieved through physical, chemical, or enzymatic treatment or a combination of them. Sterilization of acellular scaffolds was also thoroughly and comparatively evaluated. Lastly, different recellularization protocols and types of cells used for further cell seeding were demonstrated.

CONCLUSION

A comprehensive review of the existing literature about kidney tissue engineering was conducted to evaluate its effectiveness in preclinical investigations. Our findings indicate that enhancements in the design of preclinical studies are necessary to facilitate the successful translation of tissue engineering technologies into clinical applications.

Towards Safety and Regulation Criteria for Clinical Applications of Decellularized Organ-Derived Matrices

Whole-organ decellularization generates scaffolds containing native extracellular matrix (ECM) components with preserved tissue microarchitecture, providing a promising advancement in tissue engineering and regenerative medicine. Decellularization retains the ECM integrity which is important for supporting cell attachment, growth, differentiation, and biological function. Although there are consensus guidelines to standardize decellularization processes and ECM characterization, no specific criteria or standards regarding matrix sterility and biosafety have been established so far. This regulatory gap in safety, sterilization, and regulation criteria has hampered the clinical translation of decellularized scaffolds. In this review, we identify essential criteria for the safe clinical use of decellularized products from both human and animal sources. These include the decellularization efficacy, levels of chemical residue, preservation of ECM composition and physical characteristics, and criteria for the aseptic processing of decellularization to assure sterility. Furthermore, we explore key considerations for advancing decellularized scaffolds into clinical practice, focusing on regulatory frameworks and safety requirements. Addressing these challenges is crucial for minimizing risks of adverse reactions or infection transmission, thereby accelerating the adoption of tissue-engineered products. This review aims to provide a foundation for establishing robust guidelines, supporting the safe and effective integration of decellularized scaffolds into regenerative medicine applications.

Evaluation of decellularized sheep kidney scaffolds for renal tissue engineering: Biocompatibility and stem cell differentiation potential

Tissue engineering (TE) combines scaffolds, cells, and bioactive chemicals in order to create tissues. The objective is to restore or sustain tissue functionality and expedite the recovery of damaged tissues or organs in a controlled laboratory environment. This study aimed to evaluate the properties and biocompatibility of decellularized sheep kidney scaffolds (DKS) and to explore the differentiation potential of adipose-derived mesenchymal stem cells (ADSCs) into renal cells. After decellularizing sheep kidneys using freeze-drying and detergent techniques, we conducted histological studies, DNA quantification, and ultrastructural evaluations using scanning electron microscopy (SEM). Furthermore, to assay the feasibility and attachment of stem cells to the decellularized scaffolds, ADSCs were cultured on the scaffolds and subjected to the MTT assay. The expression of the pax2 gene was analyzed using real-time PCR to determine the differentiation of MSCs into kidney cells. DNA quantitation revealed a significant reduction in the quantity of DNA present in the scaffold tissue compared to the control kidney tissue. Ultrastructural examination confirmed the preservation of the decellularized scaffold's ultrastructure. Histological analysis demonstrated the complete removal of nuclear material from the scaffold. Additionally, Pax2 gene expression was significantly increased in ADSC cells cultured on the scaffold compared to the control group. The results demonstrate that the produced scaffolds are well-suited for regenerative medicine, exhibiting excellent biocompatibility and providing a conducive environment for the differentiation of ADSCs.

The Role of the Pancreatic Extracellular Matrix as a Tissue Engineering Support for the Bioartificial Pancreas

Type 1 diabetes mellitus (T1DM) is a chronic condition primarily managed with insulin replacement, leading to significant treatment costs. Complications include vasculopathy, cardiovascular diseases, nephropathy, neuropathy, and reticulopathy. Pancreatic islet transplantation is an option but its success does not depend solely on adequate vascularization. The main limitations to clinical islet transplantation are the scarcity of human pancreas, the need for immunosuppression, and the inadequacy of the islet isolation process. Despite extensive research, T1DM remains a major global health issue. In 2015, diabetes affected approximately 415 million people, with projected expenditures of USD 1.7 trillion by 2030. Pancreas transplantation faces challenges due to limited organ availability and complex vascularization. T1DM is caused by the autoimmune destruction of insulin-producing pancreatic cells. Advances in biomaterials, particularly the extracellular matrix (ECM), show promise in tissue reconstruction and transplantation, offering structural and regulatory functions critical for cell migration, differentiation, and adhesion. Tissue engineering aims to create bioartificial pancreases integrating insulin-producing cells and suitable frameworks. This involves decellularization and recellularization techniques to develop biological scaffolds. The challenges include replicating the pancreas's intricate architecture and maintaining cell viability and functionality. Emerging technologies, such as 3D printing and advanced biomaterials, have shown potential in constructing bioartificial organs. ECM components, including collagens and glycoproteins, play essential roles in cell adhesion, migration, and differentiation. Clinical applications focus on developing functional scaffolds for transplantation, with ongoing research addressing immunological responses and long-term efficacy. Pancreatic bioengineering represents a promising avenue for T1DM treatment, requiring further research to ensure successful implementation.

Liver tissue engineering using decellularized scaffolds: Current progress, challenges, and opportunities

Liver transplantation represents the only definitive treatment for patients with end-stage liver disease. However, the shortage of liver donors provokes a dramatic gap between available grafts and patients on the waiting list. Whole liver bioengineering, an emerging field of tissue engineering, holds great potential to overcome this gap. This approach involves two main steps; the first is liver decellularization and the second is recellularization. Liver decellularization aims to remove cellular and nuclear materials from the organ, leaving behind extracellular matrices containing different structural proteins and growth factors while retaining both the vascular and biliary networks. Recellularization involves repopulating the decellularized liver with appropriate cells, theoretically from the recipient patient, to reconstruct the parenchyma, vascular tree, and biliary network. The aim of this review is to identify the major advances in decellularization and recellularization strategies and investigate obstacles for the clinical application of bioengineered liver, including immunogenicity of the designed liver extracellular matrices, the need for standardization of scaffold fabrication techniques, selection of suitable cell sources for parenchymal repopulation, vascular, and biliary tree reconstruction. In vivo transplantation models are also summarized for evaluating the functionality of bioengineered livers. Finally, the regulatory measures and future directions for confirming the safety and efficacy of bioengineered liver are also discussed. Addressing these challenges in whole liver bioengineering may offer new solutions to meet the demand for liver transplantation and improve patient outcomes.

Exosome-loaded decellularized tissue: Opening a new window for regenerative medicine

Mesenchymal stem cell-derived exosomes (MSCs-EXO) have received a lot of interest recently as a potential therapeutic tool in regenerative medicine. Extracellular vesicles (EVs) known as exosomes (EXOs) are crucial for cell-cell communication throughout a variety of activities including stress response, aging, angiogenesis, and cell differentiation. Exploration of the potential use of EXOs as essential therapeutic effectors of MSCs to encourage tissue regeneration was motivated by success in the field of regenerative medicine. EXOs have been administered to target tissues using a variety of methods, including direct, intravenous, intraperitoneal injection, oral delivery, and hydrogel-based encapsulation, in various disease models. Despite the significant advances in EXO therapy, various methods are still being researched to optimize the therapeutic applications of these nanoparticles, and it is not completely clear which approach to EXO administration will have the greatest effects. Here, we will review emerging developments in the applications of EXOs loaded into decellularized tissues as therapeutic agents for use in regenerative medicine in various tissues.

Recent advances in the treatment of gastrointestinal motility disorders in children

INTRODUCTION

Pediatric gastrointestinal motility disorders represent some of the most challenging clinical conditions with largely undefined pathogenetic pathways and therefore limited therapeutic options. Herein, we provide an overview of the recent advances in treatment options for these disorders and their clinical impact.

AREAS COVERED

PubMed and Medline databases were searched for relevant articles related to the treatment of achalasia, esophageal atresia, gastroparesis, PIPO and constipation published between 2017 and 2022. In this article, we review and summarize recent advances in management of gastrointestinal motility disorders in children with a particular focus on emerging therapies as well as novel diagnostic modalities that help guide their application or develop new, more targeted treatments.

EXPERT OPINION

Gastrointestinal motility disorders represent one of the most challenging conundrums in pediatric age and despite significant advances in investigative tools, the palette of treatment options remain limited. Overall, while pharmacological options have failed to bring a curative solution, recent advances in minimal invasive therapeutic and diagnostic techniques have emerged as potential keys to symptom and quality of life improvement, such as ENDOFLIP, POEM, cine-MRI, fecal microbiota transplantation.

Vascular reconstruction of the decellularized biomatrix for whole-organ engineering-a critical perspective and future strategies

Whole-organ re-engineering is the most challenging goal yet to be achieved in tissue engineering and regenerative medicine. One essential factor in any transplantable and functional tissue engineering is fabricating a perfusable vascular network with macro- and micro-sized blood vessels. Whole-organ development has become more practical with the use of the decellularized organ biomatrix (DOB) as it provides a native biochemical and structural framework for a particular organ. However, reconstructing vasculature and re-endothelialization in the DOB is a highly challenging task and has not been achieved for constructing a clinically transplantable vascularized organ with an efficient perfusable capability. Here, we critically and articulately emphasized factors that have been studied for the vascular reconstruction in the DOB. Furthermore, we highlighted the factors used for vasculature development studies in general and their application in whole-organ vascular reconstruction. We also analyzed in detail the strategies explored so far for vascular reconstruction and angiogenesis in the DOB for functional and perfusable vasculature development. Finally, we discussed some of the crucial factors that have been largely ignored in the vascular reconstruction of the DOB and the future directions that should be addressed systematically.

A proposed model of xeno-keratoplasty using 3D printing and decellularization

Corneal opacity is a leading cause of vision impairment and suffering worldwide. Transplantation can effectively restore vision and reduce chronic discomfort. However, there is a considerable shortage of viable corneal graft tissues. Tissue engineering may address this issue by advancing xeno-keratoplasty as a viable alternative to conventional keratoplasty. In particular, livestock decellularization strategies offer the potential to generate bioartificial ocular prosthetics in sufficient supply to match existing and projected needs. To this end, we have examined the best practices and characterizations that have supported the current state-of-the-art driving preclinical and clinical applications. Identifying the challenges that delimit activities to supplement the donor corneal pool derived from acellular scaffolds allowed us to hypothesize a model for keratoprosthesis applications derived from livestock combining 3D printing and decellularization.

Evolution of biomimetic ECM scaffolds from decellularized tissue matrix for tissue engineering: A comprehensive review

Tissue engineering is essentially a technique for imitating nature. Natural tissues are made up of three parts: extracellular matrix (ECM), signaling systems, and cells. Therefore, biomimetic ECM scaffold is one of the best candidates for tissue engineering scaffolds. Among the many scaffold materials of biomimetic ECM structure, decellularized ECM scaffolds (dECMs) obtained from natural ECM after acellular treatment stand out because of their inherent natural components and microenvironment. First, an overview of the family of dECMs is provided. The principle, mechanism, advances, and shortfalls of various decellularization technologies, including physical, chemical, and biochemical methods are then critically discussed. Subsequently, a comprehensive review is provided on recent advances in the versatile applications of dECMs including but not limited to decellularized small intestinal submucosa, dermal matrix, amniotic matrix, tendon, vessel, bladder, heart valves. And detailed examples are also drawn from scientific research and practical work. Furthermore, we outline the underlying development directions of dECMs from the perspective that tissue engineering scaffolds play an important role as an important foothold and fulcrum at the intersection of materials and medicine. As scaffolds that have already found diverse applications, dECMs will continue to present both challenges and exciting opportunities for regenerative medicine and tissue engineering.

Sustained in vivo perfusion of a re-endothelialized tissue engineered kidney graft in a human-scale animal model

Introduction: Despite progress in whole-organ decellularization and recellularization, maintaining long-term perfusion in vivo remains a hurdle to realizing clinical translation of bioengineered kidney grafts. The objectives for the present study were to define a threshold glucose consumption rate (GCR) that could be used to predict in vivo graft hemocompatibility and utilize this threshold to assess the in vivo performance of clinically relevant decellularized porcine kidney grafts recellularized with human umbilical vein endothelial cells (HUVECs). Materials and methods: Twenty-two porcine kidneys were decellularized and 19 were re-endothelialized using HUVECs. Functional revascularization of control decellularized (n = 3) and re-endothelialized porcine kidneys (n = 16) was tested using an ex vivo porcine blood flow model to define an appropriate metabolic glucose consumption rate (GCR) threshold above which would sustain patent blood flow. Re-endothelialized grafts (n = 9) were then transplanted into immunosuppressed pigs with perfusion measured using angiography post-implant and on days 3 and 7 with 3 native kidneys used as controls. Patent recellularized kidney grafts underwent histological analysis following explant. Results: The glucose consumption rate of recellularized kidney grafts reached a peak of 39.9 ± 9.7 mg/h at 21 ± 5 days, at which point the grafts were determined to have sufficient histological vascular coverage with endothelial cells. Based on these results, a minimum glucose consumption rate threshold of 20 mg/h was set. The revascularized kidneys had a mean perfusion percentage of 87.7% ± 10.3%, 80.9% ± 33.1%, and 68.5% ± 38.6% post-reperfusion on Days 0, 3 and 7, respectively. The 3 native kidneys had a mean post-perfusion percentage of 98.4% ± 1.6%. These results were not statistically significant. Conclusion: This study is the first to demonstrate that human-scale bioengineered porcine kidney grafts developed via perfusion decellularization and subsequent re-endothelialization using HUVEC can maintain patency with consistent blood flow for up to 7 days in vivo. These results lay the foundation for future research to produce human-scale recellularized kidney grafts for transplantation.

Bioengineering liver tissue by repopulation of decellularised scaffolds

Liver transplantation is the only curative therapy for end stage liver disease, but is limited by the organ shortage, and is associated with the adverse consequences of immunosuppression. Repopulation of decellularised whole organ scaffolds with appropriate cells of recipient origin offers a theoretically attractive solution, allowing reliable and timely organ sourcing without the need for immunosuppression. Decellularisation methodologies vary widely but seek to address the conflicting objectives of removing the cellular component of tissues whilst keeping the 3D structure of the extra-cellular matrix intact, as well as retaining the instructive cell fate determining biochemicals contained therein. Liver scaffold recellularisation has progressed from small rodent in vitro studies to large animal in vivo perfusion models, using a wide range of cell types including primary cells, cell lines, foetal stem cells, and induced pluripotent stem cells. Within these models, a limited but measurable degree of physiologically significant hepatocyte function has been reported with demonstrable ammonia metabolism in vivo. Biliary repopulation and function have been restricted by challenges relating to the culture and propagations of cholangiocytes, though advances in organoid culture may help address this. Hepatic vasculature repopulation has enabled sustainable blood perfusion in vivo, but with cell types that would limit clinical applications, and which have not been shown to have the specific functions of liver sinusoidal endothelial cells. Minority cell groups such as Kupffer cells and stellate cells have not been repopulated. Bioengineering by repopulation of decellularised scaffolds has significantly progressed, but there remain significant experimental challenges to be addressed before therapeutic applications may be envisaged.

Easy-to-Assembly System for Decellularization and Recellularization of Liver Grafts in a Bioreactor

Decellularization of organs creates an acellular scaffold, ideal for being repopulated by cells. In this work, a low-cost perfusion system was created to be used in the process of liver decellularization and as a bioreactor after recellularization. It consists of a glass chamber to house the organ coupled to a peristaltic pump to promote liquid flow through the organ vascular tree. The rats' liver decellularization was made with a solution of sodium dodecyl sulfate. The recellularization was made with 10⁸ mesenchymal stromal/stem cells and cultivated for seven days. The decellularized matrices showed an absence of DNA while preserving the collagen and glycosaminoglycans quantities, confirming the efficiency of the process. The functional analyses showed a rise in lactate dehydrogenase levels occurring in the first days of the cultivation, suggesting that there is cell death in this period, which stabilized on the seventh day. Histological analysis showed conservation of the collagen web and some groups of cells next to the vessels. It was possible to establish a system for decellularization and a bioreactor to use for the recellularization method. It is easy to assemble, can be ready to use in little time and be easily sterilized.

Towards human organ generation using interspecies blastocyst complementation: Challenges and perspectives for therapy

Millions of people suffer from end-stage refractory diseases. The ideal treatment option for terminally ill patients is organ transplantation. However, donor organs are in absolute shortage, and sadly, most patients die while waiting for a donor organ. To date, no technology has achieved long-term sustainable patient-derived organ generation. In this regard, emerging technologies of chimeric human organ production via blastocyst complementation (BC) holds great promise. To take human organ generation via BC and transplantation to the next step, we reviewed current emerging organ generation technologies and the associated efficiency of chimera formation in human cells from the standpoint of developmental biology.

Decellularized vascularized bone grafts: A preliminary in vitro porcine model for bioengineered transplantable bone shafts

Introduction: Durable reconstruction of critical size bone defects is still a surgical challenge despite the availability of numerous autologous and substitute bone options. In this paper, we have investigated the possibility of creating a living bone allograft, using the perfusion/decellularization/recellularization (PDR) technique, which was applied to an original model of vascularized porcine bone graft. Materials and Methods: 11 porcine bone forelimbs, including radius and ulna, were harvested along with their vasculature including the interosseous artery and then decellularized using a sequential detergent perfusion protocol. Cellular clearance, vasculature, extracellular matrix (ECM), and preservation of biomechanical properties were evaluated. The cytocompatibility and in vitro osteoinductive potential of acellular extracellular matrix were studied by static seeding of NIH-3T3 cells and porcine adipose mesenchymal stem cells (pAMSC), respectively. Results: The vascularized bone grafts were successfully decellularized, with an excellent preservation of the 3D morphology and ECM microarchitecture. Measurements of DNA and ECM components revealed complete cellular clearance and preservation of ECM's major proteins. Bone mineral density (BMD) acquisitions revealed a slight, yet non-significant, decrease after decellularization, while biomechanical testing was unmodified. Cone beam computed tomography (CBCT) acquisitions after vascular injection of barium sulphate confirmed the preservation of the vascular network throughout the whole graft. The non-toxicity of the scaffold was proven by the very low amount of residual sodium dodecyl sulfate (SDS) in the ECM and confirmed by the high live/dead ratio of fibroblasts seeded on periosteum and bone ECM-grafts after 3, 7, and 16 days of culture. Moreover, cell proliferation tests showed a significant multiplication of seeded cell populations at the same endpoints. Lastly, the differentiation study using pAMSC confirmed the ECM graft's potential to promote osteogenic differentiation. An osteoid-like deposition occurred when pAMSC were cultured on bone ECM in both proliferative and osteogenic differentiation media. Conclusion: Fully decellularized bone grafts can be obtained by perfusion decellularization, thereby preserving ECM architecture and their vascular network, while promoting cell growth and differentiation. These vascularized decellularized bone shaft allografts thus present a true potential for future in vivo reimplantation. Therefore, they may offer new perspectives for repairing large bone defects and for bone tissue engineering.

Organ Regeneration Through Stem Cells and Tissue Engineering

Loss of organ and tissue due to injuries or diseases led to the development of regenerative therapies to decrease reliance on organ transplantations. It deals with employing the self-renewal ability of stem cells to differentiate into numerous lineages to assist in providing effective treatment for a range of various injuries and diseases. Regenerative engineering of organs or tissues represents an ever-expanding field that is aimed at developing biological replacements for dysfunctional organs or injured tissues. The critical issue, however, with the engineering of organs outside the human body is the insufficient availability of human cells, the absence of a suitable matrix with the same architecture and composition as the target tissue, and the maintenance of organ viability in the absence of the blood supply. The issue regarding the maintenance of the engineered organ viability can be solved using bioreactors consisting of mediums with defined chemical composition, i.e., nutrients, cofactors, and growth factors that can successively sustain the target cell's viability. Engineered extracellular matrices and stem cells to regenerate organs outside the human body are also being used. Clinically, various adult stem cell therapies are readily under practice. This review will focus on the regeneration of organs through various types of stem cells and tissue engineering techniques.

Pancreatic Lineage Cell Differentiation of Bone Marrow Mesenchymal Stromal Cells on Acellular Pancreatic Bioscaffold

OBJECTIVES

We evaluated the potential differentiation ability of bone mesenchymal stromal cells (BMSCs) into pancreatic lineage cells on a rat acellular pancreatic bioscaffold (APB) and the effect of differentiated BMSCs in vivo.

METHODS

The BMSCs were dynamically or statically cultured with or without growth factor in both culture systems. We assessed the cytological behavior and differentiation. We also evaluated the pancreatic fibrosis and pathological scores.

RESULTS

The proliferation rates of BMSCs were significantly higher in the APB groups. The APB induced BMSCs to express mRNA markers at higher levels. All tested pancreatic functional proteins were also expressed at higher levels in the APB group. The secretion of metabolic enzymes was higher in the APB system. The ultrastructure of BMSCs in the APB group further revealed the morphological characteristics of pancreatic-like cells. For the in vivo study, the pancreatic fibrosis and pathological scores were significantly lower in the differentiated BMSCs group. In addition, in both the in vitro and the in vivo study, growth factor significantly improved proliferation, differentiation, and pancreatic cell therapy.

CONCLUSIONS

The APB can promote BMSC differentiation toward pancreatic lineage and pancreatic-like phenotypes, giving it the potential for use in pancreatic cell therapies and tissue engineering.

Kidney tissue engineering in preclinical models of renal failure: a systematic review and meta-analysis

Aim: This study aims to compare the efficacy of tissue engineering for kidney reconstruction. Materials & methods: We searched MEDLINE, EMBASE (May 2021), and reference lists of review articles. Results: 19 articles matched our inclusion criteria. A range of natural, synthetic and hybrid scaffolds with or without incorporating cells/growth factors was investigated in 937 animals. More favorable results were observed with a combination of two or more biomaterials, addition of bioactive moieties, and cell seeding. Creatinine concentration, PAX2, collagen type-1, α-SMA, vimentin, IL-1, IL-6 and TNF-α gene expressions were significantly increased compared with native control. Conclusion: Tissue engineering can improve renal function and regeneration; however, further research could benefit from using hybrid scaffolds, stem cells and large animal models.

Approaches to kidney replacement therapies—opportunities and challenges

One out of seven people develop chronic kidney disease (CKD). When kidney function continues to decline, CKD patients may develop end-stage renal disease (ESRD, or kidney failure). More than 2 out of 1,000 adults develop ESRD and these patients must live on dialysis or get a kidney transplant to survive. Each year, more than $51 billion is spent to treat patients with ESRD in the United States. In addition, ESRD greatly reduces longevity and quality of life for patients. Compared to dialysis, kidney transplant offers the best chance of survival, but few donor organs are available. Thus, there is an urgent need for innovative solutions that address the shortage of kidneys available for transplantation. Here we summarize the status of current approaches that are being developed to solve the shortage of donor kidneys. These include the bioartificial kidney approach which aims to make a portable dialysis device, the recellularization approach which utilizes native kidney scaffold to make an engineered kidney, the stem cell-based approach which aims to generate a kidney de novo by recapitulating normal kidney organogenesis, the xenotransplantation approach which has the goal to make immunocompatible pig kidneys for transplantation, and the interspecies chimera approach which has potential to generate a human kidney in a host animal. We also discuss the interconnections among the different approaches, and the remaining challenges of translating these approaches into novel therapies.

Bladder Acellular Matrix Prepared by a Self-Designed Perfusion System and Adipose-Derived Stem Cells to Promote Bladder Tissue Regeneration

The bladder patch constructed with the bladder acellular matrix (BAM) and adipose-derived stem cells (ASCs) was incubated with the omentum for bladder reconstruction in a rat model of bladder augmentation cystoplasty. A self-designed perfusion system and five different decellularization protocols were used to prepare the BAM. Finally, an optimal protocol (group C) was screened out by comparing the cell nucleus residue, collagen structure preservation and biologically active components retention of the prepared BAM. ASCs-seeded (BAM-ASCs group) and unseeded BAM (BAM group) were incubated with the omentum for 7 days to promote neovascularization and then perform bladder reconstruction. Hematoxylin and eosin and Masson’s trichrome staining indicated that the bladder patches in the BAM-ASCs group could better regenerate the bladder wall structure compared to the BAM group. Moreover, immunofluorescence analyses demonstrated that the ASCs could promote the regeneration of smooth muscle, neurons and blood vessels, and the physiological function (maximal bladder capacity, max pressure prior to voiding and bladder compliance) restoration in the BAM-ASCs group. The results demonstrated that the self-designed perfusion system could quickly and efficiently prepare the whole bladder scaffold and confirmed that the prepared BAM could be used as the scaffold material for functional bladder tissue engineering applications.

Recellularization of Bioengineered Scaffolds for Vascular Composite Allotransplantation

Traumatic injuries or cancer resection resulting in large volumetric soft tissue loss requires surgical reconstruction. Vascular composite allotransplantation (VCA) is an emerging reconstructive option that transfers multiple, complex tissues as a whole subunit from donor to recipient. Although promising, VCA is limited due to side effects of immunosuppression. Tissue-engineered scaffolds obtained by decellularization and recellularization hold great promise. Decellularization is a process that removes cellular materials while preserving the extracellular matrix architecture. Subsequent recellularization of these acellular scaffolds with recipient-specific cells can help circumvent adverse immune-mediated host responses and allow transplantation of allografts by reducing and possibly eliminating the need for immunosuppression. Recellularization of acellular tissue scaffolds is a technique that was first investigated and reported in whole organs. More recently, work has been performed to apply this technique to VCA. Additional work is needed to address barriers associated with tissue recellularization such as: cell type selection, cell distribution, and functionalization of the vasculature and musculature. These factors ultimately contribute to achieving tissue integration and viability following allotransplantation. The present work will review the current state-of-the-art in soft tissue scaffolds with specific emphasis on recellularization techniques. We will discuss biological and engineering process considerations, technical and scientific challenges, and the potential clinical impact of this technology to advance the field of VCA and reconstructive surgery.

Re-Endothelialization of Decellularized Liver Scaffolds: A Step for Bioengineered Liver Transplantation

Bioengineered livers (BELs) are an attractive therapeutic alternative to address the donor organ shortage for liver transplantation. The goal of BELs technology aims at replacement or regeneration of the native human liver. A variety of approaches have been proposed for tissue engineering of transplantable livers; the current review will highlight the decellularization-recellularization approach to BELs. For example, vascular patency and appropriate cell distribution and expansion are critical components in the production of successful BELs. Proper solutions to these components of BELs have challenged its development. Several strategies, such as heparin immobilization, heparin-gelatin, REDV peptide, and anti-CD31 aptamer have been developed to extend the vascular patency of revascularized bioengineered livers (rBELs). Other novel methods have been developed to enhance cell seeding of parenchymal cells and to increase graft functionality during both bench and in vivo perfusion. These enhanced methods have been associated with up to 15 days of survival in large animal (porcine) models of heterotopic transplantation but have not yet permitted extended survival after implantation of BELs in the orthotopic position. This review will highlight both the remaining challenges and the potential for clinical application of functional bioengineered grafts.

Perfusion-Based Recellularization of Rat Livers with Islets of Langerhans

Purpose

Artificial organs might serve as alternative solutions for whole organ transplantation. Decellularization of a liver provides a non-immunogenic matrix with the advantage of three afferent systems, the portal vein, the hepatic artery and the bile duct. This study aims to evaluate the recellularization of rat livers with islets of Langerhans via the bile duct and the portal vein for the comparison of different perfusion routes.

Methods

Rat livers were decellularized in a pressure-controlled perfusion manner and repopulated with intact isolated islets of Langerhans via either the portal vein or the bile duct.

Results

Repopulation via the portal vein showed islet clusters stuck within the vascular system demonstrated by ellipsoid borders of thick reticular tissue around the islet cluster in Azan staining. After recellularization via the bile duct, islets were distributed close to the vessels within the parenchymal space and without a surrounding reticular layer. Large clusters of islets had a diameter of up to 1000 µm without clear shapes.

Conclusion

We demonstrated the bile duct to be superior to the portal vein for repopulation of a decellularized rat liver with islets of Langerhans. This technique may serve as a bioengineering platform to generate an implantable and functional endocrine neo-pancreas and provide scaffolds with the anatomic benefit of three afferent systems to facilitate co-population of cells.

Improving hemocompatibility of decellularized liver scaffold using Custodiol solution

Organ decellularization is one of the most promising approaches of tissue engineering to overcome the shortage of organs available for transplantation. However, there are key hurdles that still hinder its clinical application, and the lack of hemocompatibility of decellularized materials is a central one. In this work, we demonstrate that Custodiol (HTK solution), a common solution used in organ transplantation, increased the hemocompatibility of acellular scaffolds obtained from rat livers. We showed that Custodiol inhibited ex vivo, in vitro, and in vivo blood coagulation to such extent that allowed successful transplantation of whole-liver scaffolds into recipient animals. Scaffolds previously perfused with Custodiol showed no signs of platelet aggregation and maintained in vitro and in vivo cellular compatibility. Proteomic analysis revealed that proteins related to platelet aggregation were reduced in Custodiol samples while control samples were enriched with thrombogenicity-related proteins. We also identified distinct components that could potentially be involved with this anti-thrombogenic effect and thus require further investigation. Therefore, Custodiol perfusion emerge as a promising strategy to reduce the thrombogenicity of decellularized biomaterials and could benefit several applications of whole-organ tissue engineering.

Kidney bioengineering by using decellularized kidney scaffold and renal progenitor cells

Patients with end-stage renal disease often need dialysis to maintain their lives because of donor organ shortage. The creation of a transplantable graft to permanently replace kidney function would overcome the organ shortage problem and the morbidity associated with immunosuppression. In the present study, we decellularized rat kidneys by the perfusion of detergent, yielding acellular scaffolds with the vascular, uretic, as well as cortical and medullary architecture. To regenerate the functional organ, we seeded tubular epithelial cells and mouse kidney progenitor cells from the ureter together with endothelial cells and mouse kidney progenitor cells from the renal artery. The renal constructs from seeded cells were cultured in a whole-organ bioreactor. After 3 months of organ culture, the seeded cells formed renal tubules, grew in the glomeruli, and some mouse kidney progenitor cells were also scattered in the interstitium. We tested the function of the bioengineered kidney with standardized perfusate in vitro. The bioengineered kidney not only produced urine but also reabsorbed albumin, glucose, and calcium. We conclude that seeded cell-based bioengineering of kidneys with physiological secreting and reabsorbing properties is possible and holds therapeutic promise.

Renal bioengineering with scaffolds prepared from discarded human kidneys by human mesenchymal stem cells

AIMS

Regeneration of discarded human kidneys has been considered as an ideal approach to overcome organ shortage for the end-stage renal diseases (ESRDs). The aim of this study was to develop an effective method for preparation of kidney scaffolds that retain the matrix structure required for proliferation and importantly, differentiation of human adipose-derived mesenchymal stem cells (hAd-MSCs) into renal cells.

MAIN METHODS

we first compared two different methods using triton X-100 and sodium dodecyl sulfate (SDS) for human kidney decellularization; and characterized developed human renal extracellular matrix (ECM) scaffolds. Then, hAd-MSCs were seeded on human decellularized kidney scaffolds and cultured for up to 3 weeks. Next, viability, proliferation, and migration of seeded hAd-MSCs within the scaffolds, underwent histological and scanning electron microscopy (SEM) assessments. Moreover, differentiation of hAd-MSCs into kidney-specific cell types was examined using immunohistochemistry (IHC) staining and qRT-PCR.

KEY FINDINGS

Our results indicated that triton X-100 was a more effective detergent for decellularization of human kidneys compared with SDS. Moreover, attachment and proliferation of hAd-MSCs within the recellularized human kidney scaffolds, were confirmed. Seeded cells expressed epithelial and endothelial differentiation markers, and qRT-PCR results indicated increased expression of platelet and endothelial cell adhesion Molecule 1 (PECAM-1), paired box 2 (PAX2), and e-cadherine (E-CDH) as factors required for differentiation of hAd-MSCs into epithelial and endothelial cells.

SIGNIFICANCE

These observations indicate effectiveness of decellularization by triton X-100 to generate suitable human ECM renal scaffolds, which supported adhesion and proliferation of hAd-MSCs and could induce their differentiation towards a renal lineage.

Heparin modification improves the re-endothelialization and angiogenesis of decellularized kidney scaffolds through antithrombosis and anti-inflammation in vivo

Background

Constructing tissue-engineered kidneys using decellularized kidney scaffolds (DKS) has attracted widespread attention as it is expected to be the key to solving the shortage of donor kidneys. However, thrombosis and the host inflammatory response are unfavorable factors that hider the re-endothelialization and vascularization of the decellularized scaffolds.

Methods

Heparin was immobilized into the DKS using the method of 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide/N-hydroxysuccinimide (EDC/NHS) activation. Fourier-transform infrared (FTIR) spectra were used to verify the heparinization of DKS. Human umbilical vein endothelial cells (HUVECs) were seeded and cultured in the DKS, then the sliced scaffolds were transplanted subcutaneously into nude mouse. Scanning electron microscopy and a series of histochemical stains including hematoxylin and eosin (H&E), elastic Verhöeff-Van Gieson (EVG), Sirius red, Masson’s trichrome, and toluidine blue (TB) staining were used for morphological characterization. The qRT-PCR analysis, immunohistochemistry (IHC), and immunofluorescence (IF) staining were used to determine the expression of related molecular markers.

Results

The rat DKS completely retained the extracellular matrix and heparinized modification. The H&E staining results showed there were more HUVECs covering the internal surfaces of tubular structures in the HEP-DKS group compared with the DKS group. The IF analysis results revealed that CD31, Ki67, and CD206 had higher positive rates in HUVECs in the HEP-DKS group compared to the DKS group. Both groups of scaffolds showed blood vessel formation via H&E staining, and there were more blood vessels in the HEP-DKS group compared with the native DKS group (P<0.05). The qRT-PCR results showed that the levels of IL-1β, IL-6, and TNF-α in the HEP-DKS group were significantly lower than those of the native DKS group, while the expression level of IL-10 was significantly higher than that in the native DKS group (P<0.05).

Conclusions

Heparin modification improves the re-endothelialization and vascular regeneration of the DKS through anticoagulation in vitro and in vivo. The anti-inflammatory effect of heparin on the transplanted host was initially confirmed, and it is considered that this effect may play a non-negligible role in promoting DKS re-endothelialization and angiogenesis. Heparinized DKS is therefore a promising candidate for kidney tissue engineering.

Renal Biology Driven Macro- and Microscale Design Strategies for Creating an Artificial Proximal Tubule Using Fiber-Based Technologies

Chronic kidney disease affects one in six people worldwide. Due to the scarcity of donor kidneys and the complications associated with hemodialysis (HD), a cell-based bioartificial kidney (BAK) device is desired. One of the shortcomings of HD is the lack of active transport of solutes that would normally be performed by membrane transporters in kidney epithelial cells. Specifically, proximal tubule (PT) epithelial cells play a major role in the active transport of metabolic waste products. Therefore, a BAK containing an artificial PT to actively transport solutes between the blood and the filtrate could provide major therapeutic advances. Creating such an artificial PT requires a biocompatible tubular structure which supports the adhesion and function of PT-specific epithelial cells. Ideally, this scaffold should structurally replicate the natural PT basement membrane which consists mainly of collagen fibers. Fiber-based technologies such as electrospinning are therefore especially promising for PT scaffold manufacturing. This review discusses the use of electrospinning technologies to generate an artificial PT scaffold for ex vivo/in vivo cellularization. We offer a comparison of currently available electrospinning technologies and outline the desired scaffold properties required to serve as a PT scaffold. Discussed also are the potential technologies that may converge in the future, enabling the effective and biomimetic incorporation of synthetic PTs in to BAK devices and beyond.

Effect of heparinization on promoting angiogenesis of decellularized kidney scaffolds

Native decellularized extracellular matrix provides an adequate platform for tissues and organs and promotes the development of organogenesis and tissue remodeling. However, thrombosis poses a great challenge that hinders the transplantation for a substantial organ in vivo. Therefore, anticoagulation and re-reendothelialization of organ biological scaffolds are the primary concerns to be addressed before orthotopic transplantation. Herein, a heparinized decellularized kidney scaffold (HEP-DKSs) was prepared using end-point attachment technology, followed by binding the vascular endothelial growth factor (VEGF) to greatly improve the hemocompatibility and angiogenesis of DKSs. Based on the anticoagulant, co-culture of human umbilical vein endothelial cells, and subcapsular transplantation of kidney experiments, HEP-VEGF-DKSs are shown to reduce platelet adhesion, which is crucial for subsequent vascularization and slow release of heparin and VEGF, suggesting its ability of improve neovascularization. Taken together, these data indicated an optimal anticoagulation function of HEP-VEGF-DKSs and the potential of vascularization for regeneration of whole decellularized kidney.

In vitro investigation of the impact of pulsatile blood flow on the vascular architecture of decellularized porcine kidneys

A method was established using a scaffold-bioreactor system to examine the impact pulsatile blood flow has on the decellularized porcine kidney vascular architecture and functionality. These scaffolds were subjected to continuous arterial perfusion of whole blood at normal physiological (650 ml/min and 500 ml/min) and pathophysiological (200 ml/min) rates to examine dynamic changes in venous outflow and micro-/macrovascular structure and patency. Scaffolds subjected to normal arterial perfusion rates observed drops in venous outflow over 24 h. These reductions rose from roughly 40% after 12 h to 60% after 24 h. There were no apparent signs of clotting at the renal artery, renal vein, and ureter. In comparison, venous flow rates decreased by 80% to 100% across the 24 h in acellular scaffolds hypoperfused at a rate of 200 ml/min. These kidneys also appeared intact on the surface after perfusion. However, they presented several arterial, venous, and ureteral clots. Fluoroscopic angiography confirmed substantial alterations to normal arterial branching patterns and patency, as well as parenchymal damage. Scanning electron microscopy revealed that pulsatile blood perfusion significantly disrupted glomerular microarchitecture. This study provides new insight into circumstances that limit scaffold viability and a simplified model to analyze conditions needed to prepare more durable scaffolds for long-term transplantation.

Renal Regeneration: The Role of Extracellular Matrix and Current ECM-Based Tissue Engineered Strategies

Natural extracellular matrices (ECM) are currently being studied as an alternative source for organ transplantation or as new solutions to treat kidney injuries, which can evolve to end-stage renal disease, a life devastating condition. This paper provides an overview on the current knowledge in kidney ECM and its usefulness on future investigations. The composition and structure of kidney ECM is herein associated with its intrinsic capacity of remodeling and repair after insult. Moreover, it provides a deeper insight on altered ECM components during disease. The use of decellularized kidney matrices is discussed in the second part of the review, with emphasis on how these matrices contribute to tissue-specific differentiation of embryonic, pluripotent, and other stem cells. The evolution on the field toward different uses of xenogeneic ECM as a biological scaffold material is discussed, namely the major outcomes on whole kidney recellularization and its in vivo implantation. At last, the recent literature on the use of processed kidney decellularized ECM to produce diverse biomaterial substrates, such as hydrogels, membranes, and bioinks are reviewed, with emphasis on future perspectives of its translation into the clinic.

Engineering the Vasculature of Stem-Cell-Derived Liver Organoids

The vasculature of stem-cell-derived liver organoids can be engineered using methods that recapitulate embryonic liver development. Hepatic organoids with a vascular network offer great application prospects for drug screening, disease modeling, and therapeutics. However, the application of stem cell-derived organoids is hindered by insufficient vascularization and maturation. Here, we review different theories about the origin of hepatic cells and the morphogenesis of hepatic vessels to provide potential approaches for organoid generation. We also review the main protocols for generating vascularized liver organoids from stem cells and consider their potential and limitations in the generation of vascularized liver organoids.

Decellularized kidney scaffold alters the healing response in chronic renal failure

Decellularized (DC) kidney scaffold shows great potential for renal recovering. Our study explored the effect of the DC kidney scaffolds treating on chronic renal failure (CRF) through grafting them on 5/6 nephrectomized (5/6 Nx) rat kidneys compared with gelatin sponges covered the incision edges. Blood urea nitrogen and angiotensin II were significantly lower in most time in scaffold-grafted groups. Remnant kidney tumor necrosis factor-α and fibroblast growth factor in scaffold-grafted groups significantly reduced in majority of time points compared with controls. But platelet-derived growth factor-BB showed a different varied tendency, first higher in scaffold groups on week 2, 4, 6, but lower on week 8, finally no difference on week 12 compared with gelatin-sponge groups. In addition, the index of glomerular sclerosis was significantly lesser in scaffold-grafted groups, and, the accumulation of collagen III and collagen IV decreased in scaffold-grafted groups on week 6, 8, 12 compared with gelatin-sponge groups. Moreover, DC scaffolds enhanced the expression of CD133 on week 2, 6, 8, 12. In conclusion, DC kidney scaffold altered the healing response after 5/6 nephrectomy and ameliorated renal injury to some degree. Therefore, DC kidney scaffold could be a promising therapeutic method on CRF.

Detection of the residual concentration of sodium dodecyl sulfate in the decellularized whole rabbit kidney extracellular matrix

To optimize rabbit kidney decellularization protocol, using sodium dodecyl sulfate (SDS) as a commonly used detergent, a methylene blue based assay was employed for detecting the minimum nontoxic SDS level for future cell seeding. The rabbit kidney tissues were decellularized with the perfusion-based method and underwent several investigations to determine the efficacy of decellularization in preserving the extracellular matrix (ECM) and cell removal. SDS detection was performed by incubating with methylene blue and subsequent extraction with chloroform. MTT (3-(4, 5-dimethylthiazol-2-yr)-2,5-diphenyltetrazolium bromide) assay and SDS release were also evaluated during the entire process. After the first washing cycle, SDS concentration was 0.036, in 500 mL of the washing liquid, which slowly decreased and reached to 0.009 % after at the end of seventh washing cycle. In the 9th cycle, SDS was gradually decreased and reached to 0.003 %. SDS was significantly released after one week of incubation which ceased after ten washing cycles. The results of MTT assay demonstrated that different cells exhibited various sensitivity levels when exposed to serial concentrations of SDS. Human embryonic kidney cells (HEK293) with 0.003 % threshold for cellular toxicity and 87.4 % cell viability were more resistant compared with mesenchymal stem cells with 0.001 % threshold and 85.4 % cell viability. Colorimetric assay with methylene blue is a straightforward and non-invasive method to detect residual SDS present in tissue and can also prevent ECM destruction after several washings for detergent removal from decellularized tissues.

Bioengineering of the digestive tract: approaching the clinic

The field of regenerative medicine is developing technologies that, in the near future, will offer alternative approaches to either cure diseases affecting the gastrointestinal tract or slow their progression by leveraging the intrinsic ability of our tissues and organs to repair after damage. This article will succinctly illustrate the three technologies that are closer to clinical translation-namely, human intestinal organoids, sphincter bioengineering and decellularization, whereby the cellular compartment of a given segment of the digestive tract is removed to obtain a scaffold consisting of the extracellular matrix. The latter will be used as a template for the regeneration of a functional organ, whereby the newly generated cellular compartment will be obtained from the patient's own cells. Although clinical application of this technology is approaching, product development challenges are being tackled to warrant safety and efficacy.

Stem/progenitor cell in kidney: characteristics, homing, coordination, and maintenance

Renal failure has a high prevalence and is becoming a public health problem worldwide. However, the renal replacement therapies such as dialysis are not yet satisfactory for its multiple complications. While stem/progenitor cell-mediated tissue repair and regenerative medicine show there is light at the end of tunnel. Hence, a better understanding of the characteristics of stem/progenitor cells in kidney and their homing capacity would greatly promote the development of stem cell research and therapy in the kidney field and open a new route to explore new strategies of kidney protection. In this review, we generally summarize the main stem/progenitor cells derived from kidney in situ or originating from the circulation, especially bone marrow. We also elaborate on the kidney-specific microenvironment that allows stem/progenitor cell growth and chemotaxis, and comment on their interaction. Finally, we highlight potential strategies for improving the therapeutic effects of stem/progenitor cell-based therapy. Our review provides important clues to better understand and control the growth of stem cells in kidneys and develop new therapeutic strategies.

The Renal Extracellular Matrix as a Supportive Scaffold for Kidney Tissue Engineering: Progress and Future Considerations

During the past decades, diverse methods have been used toward renal tissue engineering in order to replace renal function. The goals of all these techniques included the recapitulation of renal filtration, re-absorptive, and secretary functions, and replacement of endocrine/metabolic activities. It is also imperative to develop a reliable, up scalable, and timely manufacturing process. Decellularization of the kidney with intact ECM is crucial for in-vivo compatibility and targeted clinical application. Contemporarily there is an increasing interest and research in the field of regenerative medicine including stem cell therapy and tissue bioengineering in search for new and reproducible sources of kidneys. In this chapter, we sought to determine the most effective method of renal decellularization and recellularization with emphasis on biologic composition and support of stem cell growth. Current barriers and limitations of bioengineered strategies will be also discussed, and strategies to overcome these are suggested.

Syndecan-4 promotes vascular beds formation in tissue engineered liver via thrombospondin 1

Instantaneous blood coagulation after bioengineered liver transplantation is a major issue, and the key process in its prevention is the construction of the endothelial vascular bed on biomimetic scaffolds. However, the specific molecules involved in the regulation of the vascular bed formation remain unclear. Syndecan-4 is a type I transmembrane glycoprotein commonly expressed in the human body; its receptor has been reported as critical for optimal cell adhesion and initiation of intracellular signaling, indicating its promising application in vascular bed formation. In the current study, bioinformatics analysis and in vitro experiments were performed to evaluate whether syndecan-4 promoted endothelial cell migration and functional activation. Exogenous syndecan-4-overexpressing endothelial cells were perfused into the decellularized liver scaffold, which was assessed by Masson’s trichrome staining. Western blotting and qRT-PCR were used to evaluate the effects of syndecan-4 on the thrombospondin 1 (THBS1) stability. We found that syndecan-4 promoted the adhesion of vascular endothelial cells and facilitated cell migration and angiogenesis. Furthermore, syndecan-4 overexpression resulted in a well-aligned endothelium on the decellularized liver scaffolds. Mechanistically, syndecan-4 destabilized THBS1 at the protein level. Therefore, our data revealed that syndecan-4 promoted the biological activity of endothelial cells on the bionic liver vascular bed through THBS1. These findings provide scientific evidences for solving transient blood coagulation after bionic liver transplantation.

Bioengineering lungs - current status and future prospects

INTRODUCTION

Once pulmonary disease progresses to end-stage pulmonary disease, treatment options are very limited. An important advance in the field is the development of a bioartificial lung derived from a generic matrix scaffold populated with patients' own cells. Significant progress has already been made in the engineering of bioartificial lungs.

AREAS COVERED

This review explains how previous and current research contributes to the goal of creating a successful bioartificial lung, and the barriers faced in doing so. We will also highlight some of the design considerations being explored to optimize bioartificial lungs and considerations for clinical translation.

EXPERT OPINION

While current bioartificial lungs are able to provide short-term gas exchange in large-animal studies, much work is still required to combine the disciplines of cell biology, materials science, and tissue engineering to create such clinically useful and functioning artificial lungs.

Progressing the field of Regenerative Rehabilitation through novel interdisciplinary interaction

The synergy between biological and bioengineering advances is critical to developing novel and impactful translational therapies. However, there currently are few opportunities for regenerative scientists to be exposed to the methodologies commonly employed in the clinic by rehabilitation professionals, and most rehabilitation scientists and clinicians are not exposed to the many advances of regenerative medicine. This disconnect has impeded the pace of progress in the field. The Eighth Annual International Symposium on Regenerative Rehabilitation brought together basic scientists, engineers, and rehabilitation clinicians to present scientifically rigorous and cutting-edge research and clinical management, focusing on new and innovative approaches that combine discoveries in tissue engineering, medical devices, and cellular therapies with rehabilitative protocols.

Decellularized gastric matrix as a mesh for gastric perforation repair

The development of novel materials with effective defect-repairing properties will help avoid subtotal gastrectomy in patients with large gastric perforations. We prepared perfused decellularized gastric matrix (PDGM) and analyzed its components, spatial structure, biomechanics, cytotoxicity, and histocompatibility to validate its efficacy in the repair of gastric perforation. PDGM retained large amounts of gastric extracellular matrix, while residual glandular cells and muscle fibers were not found. The spatial structure of the tissue was well preserved, while the DNA and glycosaminoglycan contents were significantly decreased compared with normal gastric tissue (p < .01). There was no obvious deformation of the spatial structure and tissue elasticity of PDGM after sterilization by Cobalt-60 irradiation. The PDGM had good histocompatibility. PDGM was then used to repair a rat gastric perforation model. Radiography of the upper gastrointestinal tract at 24 hr postoperatively revealed no contrast agent leakage. There was evidence of early fibroblast proliferation, which was complicated by capillary regeneration. The hyperplastic gastric gland was slightly disarranged after repair. Defects of the muscular layer also healed a little with the regeneration process. PDGM is a nontoxic biocompatible biological mesh that may be useful for repairing relatively large gastric defects.

Decellularised whole ovine testis as a potential bio-scaffold for tissue engineering

The aim of this study was to determine an efficient whole-organ decellularisation protocol of a human-sized testis by perfusion through the testicular arteries. In the first step of this study, we determined the most efficient detergent agent, whereas the second phase delineated the optimal time required for the decellularisation process. Initially sheep testes were decellularised by one of three different detergent agents: sodium dodecyl sulphate (SDS), Triton X-100 and trypsin-ethylenediamine tetraacetic acid (EDTA) solutions, each perfused for 6h. In the second phase, the selected detergent agent was applied for different time periods. A total number of 20 organs were processed during this investigation. The efficacy of the decellularisation process and the preservation of the extracellular matrix components and structure were evaluated by histopathological examinations, 4',6'-diamidino-2-phenylindole (DAPI) staining, DNA quantification, hydroxyproline measurement, magnetic resonance imaging and scanning electron microscopy. Organ perfusion with 1% SDS solution for 6 to 8h demonstrated the most desirable outcomes regarding decellularisation and extracellular matrix preservation. The 3-[4, 5-dimethylthiazol-2-yl]-2, 5-diphenyltetrazolium bromide (MTT) assay was used to determine the toxicity of the scaffold and its potential for further application in tissue-engineering investigations. This investigation introduces an efficient method to produce a three-dimensional testicular bio-scaffold resembling the properties of the native organ that could be employed in tissue-engineering studies.

Enhanced vascularization and biocompatibility of rat pancreatic decellularized scaffolds loaded with platelet-rich plasma

The ultimate goal of pancreatic tissue engineering is to create a long-lived substitute organ to treat diabetes. However, the lack of neovascularization and the occurrence of immune response limit the efficacy of tissue-engineered pancreas after in vivo transplantation. Platelet-rich plasma (PRP) is an autologous platelet concentrate containing a large number of growth factors and immunoregulatory factors. The aim of this study was to evaluate rat pancreatic decellularized scaffold (PDS) loaded with PRP for vascularization, host inflammatory response and macrophage polarization in an animal model. The study results indicated that compared to PDS, PRP-loading PDS exhibited the enhanced mechanical properties and released growth factors in a slow and sustained manner to supplement the loss of growth factors during decellularization. In vitro, human umbilical vein endothelial cells (HUVECs) were seeded in PDS and PRP-loading PDS, and cultured in the circular perfusion system. When compared with PDS, PRP-loading PDS significantly promoted the colonization, proliferation and pro-angiogenic genes expression of cells on scaffolds. In vivo, PDS loaded with PRP then re-endothelialized with HUVECs were implanted subcutaneously in rats, which enhanced the angiogenesis of scaffolds, inhibited the host inflammatory response, and induced the polarization dominated by pro-regenerative M2 macrophages that also facilitated tissue vascular regeneration. Thus, the re-endothelialized PRP-loading PDS may represent a promising bioengineered pancreas with sustained vascularization and excellent biocompatibility.

Evaluation of different sterilization methods for decellularized kidney tissue

The main goal of this study was to assess the effect of different sterilization treatment for sterilization of decellularized kidney tissue. Rabbit kidneys were decellularized by the perfusion-based method using sodium dodecyl sulfate (SDS) and Triton X-100. Then, decellularized kidney slices were prepared and sterilized by an antibiotic cocktail, PAA (0.5 %, 1% and 1.5 %), 5KG γ-irradiation and 320-480 nm UV-irradiation. Histological evaluations, DNA quantification assay, MTT assay, scanning electron microscopy (SEM), mechanical test and bacterial and fungal culture tests were performed to determine the quality of decellularization and sterilization processes. The kidney slices were seeded by adipose-derived mesenchymal stem cells (ASCs) to assess the cell adhesion capability after treatment. The results of the current study indicated that PAA 0.5 % was the most efficient method to completely decontaminate rabbit decellularized kidney tissue while preserving the mechanical properties and main components of the matrix which are necessary for cell-matrix interaction and cell adhesion. The 5KG γ-irradiation was determined to be the most destructive sterilization method, with reduced the mechanical strengths as well as altered microstructure of the kidney matrix and no cell adhesion. In addition, UV-irradiation is not able to sterile the decellularized tissues. Therefore PAA 0.5 % sterilization method can be a powerful means for sterilization of biological scaffolds.