Topographical analysis of canine parvovirus virions and recombinant VP2 capsids

Emergence of novel canine parvovirus type 2 and its pathogenesis in raccoon dogs

Three parvoviruses were isolated from the raccoon dogs experiencing severe enteritis, named RDPV-DP1, RDPV-DP2 and RDPV-DP3, respectively. The VP2 genes of the 3 isolates showed 99.9% identity at the nucleotide level, and shared 99.1%-99.5% identity with the reference CPVs. The RDPVs resembled original CPV-2, but with four mutations. The RDPVs displayed S297A of VP2 protein as CPV-2a or CPV-2b prevalent throughout most of the world. Residue N375D was found in the 3 isolates, resembling CPV-2a/2b/2c. And the 3 isolates had a natural mutation of VP2 residue V562L, which is adjacent to residue 564 and 568 and might be involved in host range. Interestingly, VP2 S27T was firstly found in the isolates. Phylogenetic analysis of VP2 genes revealed that the RDPVs were clustered into one small evolutionary branch and shared the identical branch with 7 CPV-2 isolates from raccoon dogs and one CPV-2 isolate from fox, not with CPV vaccine viruses. Phylogenetic analysis of NS1 genes demonstrated that the RDPVs shared the identical branch with the reference CPV-2a/2b/2c. Experimental infection showed that RDPV infection caused a high morbidity in raccoon dogs. It implied that the RDPV was virulent to raccoon dogs and continued to evolve in China.

Development of a duplex rapid assay for immunoglobulins M and G to evaluate the parvoviral immune status of clinically healthy dogs

A duplex rapid assay for detection of serum antibodies to canine parvovirus (CPV) was developed. Canine immunoglobulin (Ig)M or IgG were captured in immunotubes with anti-canine IgM or IgG and detected with parvovirus VP2 recombinant protein followed by an anti-VP2 monoclonal antibody. The assay was tested using a collection of sera from dogs that were vaccinated against CPV on arrival at an animal shelter in Madrid, Spain. Results were compared with those of 2 commercial enzyme-linked immunosorbent assays (ELISAs) considered as reference techniques. A high correlation was found between the duplex rapid assay and the ELISAs, presenting an accuracy of 98% and 100% for IgG and IgM, respectively. According to the IgG and IgM levels at days 0-3 postvaccination, the samples were divided into 2 groups. One group of dogs showed high IgG and low IgM values at the first sampling post-vaccination and during the following 14 days, indicating that they had previously been in contact with the virus, either by vaccination or infection before arrival at the animal shelter. A second group of dogs appeared to be unvaccinated or uninfected before arrival at the animal shelter because they had negative IgM and IgG values soon after vaccination. These animals responded to vaccination, as demonstrated by seroconversion of both isotypes of immunoglobulins. The developed assay appears to be useful in determining the unknown immune status of dogs to CPV, especially in kennels and shelters where the rate of infection by CPV is relatively high.

Expression and subcellular targeting of canine parvovirus capsid proteins in baculovirus-transduced NLFK cells

A mammalian baculovirus delivery system was developed to study targeting in Norden Laboratories feline kidney (NLFK) cells of the capsid proteins of canine parvovirus (CPV), VP1 and VP2, or corresponding counterparts fused to EGFP. VP1 and VP2, when expressed alone, both had equal nuclear and cytoplasmic distribution. However, assembled form of VP2 had a predominantly cytoplasmic localization. When VP1 and VP2 were simultaneously present in cells, their nuclear localization increased. Thus, confocal immunofluorescence analysis of cells transduced with the different baculovirus constructs or combinations thereof in the absence or presence of infecting CPV revealed that the VP1 protein is a prerequisite for efficient targeting of VP2 to the nucleus. The baculovirus vectors were functional and the genes of interest efficiently introduced to this CPV susceptible mammalian cell line. Thus, we show evidence that the system could be utilized to study targeting of the CPV capsid proteins.

Influence of flanking sequences on presentation efficiency of a CD8+ cytotoxic T-cell epitope delivered by parvovirus-like particles

We have previously developed an antigen-delivery system based on hybrid recombinant porcine parvovirus-like particles (PPV-VLPs) formed by the self-assembly of the VP2 protein of PPV carrying a foreign epitope at its N terminus. In this study, different constructs were made containing a CD8(+) T-cell epitope of chicken ovalbumin (OVA) to analyse the influence of the sequence inserted into VP2 on the correct processing of VLPs by antigen-presenting cells. We analysed the presentation of the OVA epitope inserted without flanking sequences or with either different natural flanking sequences or with the natural flanking sequences of a CD8(+) T-cell epitope from the lymphocytic choriomeningitis virus nucleoprotein, and as a dimer with or without linker sequences. All constructs were studied in terms of level of expression, assembly of VLPs and ability to deliver the inserted epitope into the MHC I pathway. The presentation of the OVA epitope was considerably improved by insertion of short natural flanking sequences, which indicated the relevance of the flanking sequences on the processing of PPV-VLPs. Only PPV-VLPs carrying two copies of the OVA epitope linked by two glycines were able to be properly processed, suggesting that the introduction of flexible residues between the two consecutive OVA epitopes may be necessary for the correct presentation of these dimers by PPV-VLPs. These results provide information to improve the insertion of epitopes into PPV-VLPs to facilitate their processing and presentation by MHC class I molecules.

Release of canine parvovirus from endocytic vesicles

Canine parvovirus (CPV) is a small nonenveloped virus with a single-stranded DNA genome. CPV enters cells by clathrin-mediated endocytosis and requires an acidic endosomal step for productive infection. Virion contains a potential nuclear localization signal as well as a phospholipase A(2) like domain in N-terminus of VP1. In this study we characterized the role of PLA(2) activity on CPV entry process. PLA(2) activity of CPV capsids was triggered in vitro by heat or acidic pH. PLA(2) inhibitors inhibited the viral proliferation suggesting that PLA(2) activity is needed for productive infection. The N-terminus of VP1 was exposed during the entry, suggesting that PLA(2) activity might have a role during endocytic entry. The presence of drugs modifying endocytosis (amiloride, bafilomycin A(1), brefeldin A, and monensin) caused viral proteins to remain in endosomal/lysosomal vesicles, even though the drugs were not able to inhibit the exposure of VP1 N-terminal end. These results indicate that the exposure of N-terminus of VP1 alone is not sufficient to allow CPV to proliferate. Some other pH-dependent changes are needed for productive infection. In addition to blocking endocytic entry, amiloride was able to block some postendocytic steps. The ability of CPV to permeabilize endosomal membranes was demonstrated by feeding cells with differently sized rhodamine-conjugated dextrans together with the CPV in the presence or in the absence of amiloride, bafilomycin A(1), brefeldin A, or monensin. Dextran with a molecular weight of 3000 was released from vesicles after 8 h of infection, while dextran with a molecular weight of 10,000 was mainly retained in vesicles. The results suggest that CPV infection does not cause disruption of endosomal vesicles. However, the permeability of endosomal membranes apparently changes during CPV infection, probably due to the PLA(2) activity of the virus. These results suggest that parvoviral PLA(2) activity is essential for productive infection and presumably utilized in membrane penetration process of the virus, but CPV also needs other pH-dependent changes or factors to be released to the cytoplasm from endocytic vesicles.

Assembly of fluorescent chimeric virus-like particles of canine parvovirus in insect cells

Canine parvovirus (CPV) is a small non-enveloped ssDNA virus composed of the viral proteins VP1, VP2, and VP3 with a T=1 icosahedral symmetry. VP2 is nested in VP1 and the two proteins are produced by differential splicing of a primary transcript of the right ORF of the viral genome. The VP2 protein can be further proteolytically cleaved to form VP3. Previous studies have shown that VP1 and VP3 are unnecessary for capsid formation and consequently, that VP2 alone is sufficient for assembly. We have hypothesized that insertion of the enhanced green fluorescent protein (EGFP) at the N-terminus of VP2 could be carried out without altering assembly. To investigate the possibility to develop fluorescent virus-like particles (fVLPs) from such chimeric VP2 proteins, the corresponding fusion construct was abundantly expressed in insect cells. Confocal imaging indicated that the EGFP-VP2 fusion product was assembled to fluorescent capsid-like complexes. In addition, electron micrographs of purified EGFP-VP2 complexes showed that they displayed a very similar size and appearance when compared to VP2 VLPs. Further, immunolabelling of purified EGFP-VP2 VLPs showed the presence of EGFP within the structure. Fluorescence correlation spectroscopy (FCS) studies confirmed that fVLPs were very similar in size when compared to authentic CPV. Finally, feeding of mammalian cells susceptible to CPV infection with these fVLPs indicated that entry and intracellular trafficking could be observed. In summary, we have developed fluorescent virus-like nanoparticles carrying a heterologous entity that can be utilized as a visualization tool to elucidate events related to a canine parvovirus infection.

Minor displacements in the insertion site provoke major differences in the induction of antibody responses by chimeric parvovirus-like particles

An antigen-delivery system based on hybrid virus-like particles (VLPs) formed by the self-assembly of the capsid VP2 protein of canine parvovirus (CPV) and expressing foreign peptides was investigated. In this report, we have studied the effects of inserting the poliovirus C3:B epitope in the four loops and the C terminus of the CPV VP2 on the particle structure and immunogenicity. Epitope insertions in the four loops allowed the recovery of capsids in all of the mutants. However, only insertions of the C3:B epitope in VP2 residue 225 of the loop 2 were able to elicit a significant anti-peptide antibody response, but not poliovirus-neutralizing antibodies, probably because residue 225 is located in an small depression of the surface. To fine modulate the insertion site in loop 2, a cassette-mutagenesis was carried out to insert the epitope in adjacent positions 226, 227, and 228. The epitope C3:B inserted into these positions was well recognized by the specific monoclonal antibody C3 by immunoelectron microscopy. BALB/c mice immunized with these chimeric C3:B CPV:VLPs were able to elicit an strong neutralizing antibody response (>3 log(10) units) against poliovirus type 1 (Mahoney strain). Therefore, minor displacements in the insertion place cause dramatic changes in the accessibility of the epitope and the induction of antibody responses.

Parvovirus-like particles as vaccine vectors

A wide array of systems have been developed to improve "classic" vaccines. The use of small polypeptides able to elicit potent antibody and cytotoxic responses seems to have enormous potential in the design of safer vaccines. While peptide coupling to large soluble proteins such as keyhole limpet hemocyanin is the current method of choice for eliciting antibody responses and insertion in live viruses for cytotoxic T-lymphocyte responses, alternative cheaper and/or safer methods will clearly be required in the future. Virus-like particles constitute very immunogenic molecules that allow for covalent coupling of the epitopes of interest in a simple way. In this article, we detail the methodology employed for the preparation of efficient virus vectors as delivery systems. We used parvovirus as the model for the design of new vaccine vectors. Recently parvovirus-like particles have been engineered to express foreign polypeptides in certain positions, resulting in the production of large quantities of highly immunogenic peptides, and to induce strong antibody, helper-T-cell, and cytotoxic T-lymphocyte responses. We discuss the different alternatives and the necessary steps to carry out this process, placing special emphasis on the flow of decisions that need to be made during the project.

Epitope mapping of Aleutian mink disease parvovirus virion protein VP1 and 2

Six overlapping fragments of the Aleutian Mink Disease parvoVirus (AMDV) virion protein VP1 and 2 (VP1/2) gene were inserted into the expression vector pMAL-c2. Four of the clones carried large overlapping fragments covering the entire VP1/2 gene. The remaining two clones covered specifically chosen regions within the VP1/2 gene. Using a Western blotting detection system, sera from AMDV-infected mink were tested against the recombinant polypeptides. These studies showed reactions primarily directed against the two AMDV polypeptides ranging from amino acids 297 to 518. Weaker reactions against other regions of the VP1/2 were also observed. The small fusion protein designed to cover the presumed AMDV VP1/2 loop 4 was purified by affinity chromatography and used to develop solid-phase immunoassays. Twelve small synthetic peptides were constructed and used as inhibitors. A peptide covering amino acids S428 to T448 was shown to block the reactivity of a pool of positive mink sera, indicating the presence of one dominant linear epitope.

Mapping the antigenic structure of porcine parvovirus at the level of peptides

The antigenic structure of the capsid proteins of porcine parvovirus (PPV) was investigated. A total of nine linear epitopes were identified by Pepscan using porcine or rabbit anti-PPV antisera. No sites were identified with a panel of neutralising monoclonal antibodies (MAbs). All epitopes were located in the region corresponding to the major capsid protein VP2. Based on this information, and on analogy to other autonomous parvoviruses, 24 different peptides were synthesised, coupled to keyhole limpet haemocyanin (KLH) and used to immunise rabbits. Most antisera were able to bind viral protein. Only peptides from the N-terminal part of VP2 were able to induce virus-neutralising antibodies, although at low levels. A similar neutralising activity could be obtained in pigs. The exposure of the N-terminus was shown in full virions, both by immunoelectron microscopy and absorption experiments. It is concluded that in PPV, the VP2 N-terminus is involved in virus neutralisation (VN) and peptides from this region are therefore primary targets for developing peptide-based vaccines against this virus.

Identification of domains in canine parvovirus VP2 essential for the assembly of virus-like particles

Canine parvovirus capsids are composed of 60 copies of VP2 and 6 to 10 copies of VPl. To locate essential sites of interaction between VP2 monomers, we have analyzed the effects of a number of VP2 deletion mutants representing the amino terminus and the four major loops of the surface, using as an assay the formation of virus-like particles (VLPs) expressed by recombinant baculoviruses. For the amino terminus we constructed three mutants with progressively larger deletions, i.e., 9, 14, and 24 amino acids. Deletions of 9 and 14 amino acids did not affect the morphology and assembly capabilities of the mutants. However, the mutant with the 24-amino-acid deletion did not show hemagglutination properties or correct VLP morphology, stressing again the relevance of the RNER domain in canine parvovirus functionality. Three of the four mutants with deletions in the loops failed to make correct VLPs, indicating that these regions are essential for correct capsid assembly and morphology. Only the mutant with the deletion in loop 2 was able to assemble in regular VLPs, suggesting that this loop has little or no effect in capsid morphogenesis. Further research has demonstrated that this region can tolerate the insertion of foreign epitopes that are correctly exposed in the surface of the capsid. This result opens the door to the use of these VLPs for antigen delivery.

Peptide vaccine against canine parvovirus: identification of two neutralization subsites in the N terminus of VP2 and optimization of the amino acid sequence

The N-terminal domain of the major capsid protein VP2 of canine parvovirus was shown to be an excellent target for development of a synthetic peptide vaccine, but detailed information about number of epitopes, optimal length, sequence choice, and site of coupling to the carrier protein was lacking. Therefore, several overlapping peptides based on this N terminus were synthesized to establish conditions for optimal and reproducible induction of neutralizing antibodies in rabbits. The specificity and neutralizing ability of the antibody response for these peptides were determined. Within the N-terminal 23 residues of VP2, two subsites able to induce neutralizing antibodies and which overlapped by only two glycine residues at positions 10 and 11 could be discriminated. The shortest sequence sufficient for neutralization induction was nine residues. Peptides longer than 13 residues consistently induced neutralization, provided that their N termini were located between positions 1 and 11 of VP2. The orientation of the peptides at the carrier protein was also of importance, being more effective when coupled through the N terminus than through the C terminus to keyhole limpet hemocyanin. The results suggest that the presence of amino acid residues 2 to 21 (and probably 3 to 17) of VP2 in a single peptide is preferable for a synthetic peptide vaccine.

Full protection in mink against mink enteritis virus with new generation canine parvovirus vaccines based on synthetic peptide or recombinant protein

Two recently developed vaccine--one based on synthetic peptide and one based on recombinant capsid protein--fully protected dogs against heavy experimental canine parvovirus (CPV) infection. The high sequence homology ( > 98%) and antigenic similarity between CPV and mink enteritis virus (MEV), feline panleukopenia virus, and raccoon parvovirus, suggest that both vaccines could protect mink, cats and raccoons against these respective host range variants. This was tested in mink and turned out to be the case. The two vaccines were fully protective and as effective as a conventional commercial vaccine based on inactivated virus. Surprisingly, this protection was obtained after only a single injection. Furthermore, the vaccinal dose of 150 micrograms of conjugated peptide or 3 micrograms of recombinant VP2 particles per animal, are sufficiently low to be cost-effective and applicable on a large scale.

Effective induction of neutralizing antibodies with the amino terminus of VP2 of canine parvovirus as a synthetic peptide

Fourteen synthetic peptides corresponding to previously mapped antigenic sites in VP2 of canine parvovirus (CPV) were used for immunization of rabbits to identify antiviral properties favourable for inclusion into a vaccine. Most antipeptide antisera obtained were reactive with viral protein, and with one of them it was possible to locate the hypothetical amino terminus of VP3 within positions 15-31 of VP2. Virus-neutralizing antibodies were only obtained with two overlapping 15-mer peptides corresponding in sequence to the amino terminus of VP2 (MSDGAVQPDGGQPAVRNERAT). Antibodies in the neutralizing sera bound most strongly to amino acids of the sequence DGGQPAV within the N-terminus of VP2, indicating that efforts to develop a synthetic vaccine against CVP should be focused on this stretch of amino acids. The two peptides induced long-lasting immunity (at least 8 months) using either Freund's adjuvant or aluminium hydroxide plus Quil A. Thus, this approach delineated the exact peptide sequence useful for vaccines applied to the amino-terminal region of VP2. These findings in experimental animals form a solid basis for exploration of a synthetic peptide vaccine against parvovirus infection in dogs, minks or cats.

First peptide vaccine providing protection against viral infection in the target animal: studies of canine parvovirus in dogs

A synthetic peptide vaccine which protects dogs against challenge with virulent canine parvovirus is described. The amino acid sequence used was discovered in previous studies on the immunogenic properties of previously mapped antigenic sites and represents the amino-terminal region of viral protein VP2. As with marker vaccines, it is possible to discriminate between vaccinated dogs that have not been exposed to the virus and dogs that have been infected with the virus. The protective mechanism can be explained by a humoral response against the peptide aided by T-cell epitopes contained in the carrier protein used for peptide coupling. This is the first example of a synthetic peptide vaccine that induces protection in target animals.