Molecular characterization and structural instability of the industrially important composite metabolic plasmid pLP712

The resident TP712 prophage of Lactococcus lactis MG1363 provides extra holin functions to the new P335 phage CAP for effective host lysis

Prophages are widely present in Lactococcus lactis, a lactic acid bacterium (LAB) that plays a key role in dairy fermentations. L. lactis MG1363 is a laboratory strain used worldwide as a model LAB. Initially regarded as plasmid- and prophage-free, MG1363 carries two complete prophages TP712 and MG-3. Only TP712 seems to be inducible but unable to lyse the host. Several so-called TP712 lysogens able to lyse upon prophage induction were reported in the past, but the reason for their lytic phenotype remained unknown. In this work, we describe CAP, a new P335 prophage detected in the "lytic TP712 lysogens", which had remained unnoticed. CAP is able to excise after mitomycin C treatment, along with TP712, and able to infect L. lactis MG1363-like strains but not the lytic TP712 lysogens. Both phages cooperate for efficient host lysis. While the expression in trans of the CAP lytic genes was sufficient to trigger cell lysis, this process was boosted when the resident TP712 prophage was concomitantly induced. Introduction of mutations into the TP712 lytic genes revealed that its holin but not its endolysin plays a major role. Accordingly, it is shown that the lytic activity of the recombinant CAP endolysin relies on membrane depolarization. Revisiting the seminal work to generate the extensively used L. lactis MG1363 strain led us to conclude that the CAP phage was originally present in its ancestor L. lactis NCDO712 and our results solved long-standing mysteries around the MG1363 resident prophage TP712 reported in the "pre-sequencing" era. Importance Prophages are bacterial viruses that integrate in the chromosome of bacteria until an environmental trigger induces their lytic cycle ending with lysis of the host. Prophages present in dairy starters can compromise milk fermentation and represent a serious threat in dairy plants. In this work, we have discovered that two temperate phages TP712 and CAP infecting the laboratory strain Lactococcus lactis MG1363 join forces to lyse the host. Based on the in vitro lytic activity of the LysCAP endolysin, in combination with mutated versions of TP712 lacking either its holin or endolysin, we conclude that this cooperation relies on the combined activity of the holins of both phages that boost the activity of LysCAP. The presence of an additional prophage explains the lytic phenotype of the formerly thought to be single TP712 lysogens that had remained a mystery for many years.

Generation of Lactose- and Protease-Positive Probiotic Lacticaseibacillus rhamnosus GG by Conjugation with Lactococcus lactis NCDO 712

Lacticaseibacillus rhamnosus GG (LGG) is the most studied probiotic bacterium in the world. It is used as a probiotic supplement in many foods, including various dairy products. However, LGG grows poorly in milk, as it neither metabolizes the main milk carbohydrate lactose nor degrades the major milk protein casein effectively. In this study, we made L. rhamnosus GG lactose and protease positive by conjugation with the dairy Lactococcus lactis strain NCDO 712 carrying the lactose-protease plasmid pLP712. A lactose-hydrolyzing transconjugant colony was obtained on agar containing lactose as the sole source of carbohydrates. By microscopic analysis and PCR with LGG- and pLP712-specific primers, the transconjugant was confirmed to have originated from LGG and to carry the plasmid pLP712. The transconjugant was named L. rhamnosus LAB49. The isolation of plasmids revealed that not only pLP712 but also other plasmids had been transferred from L. lactis into LGG during conjugation. With plasmid-specific PCR primers, four additional lactococcal plasmids were detected in LAB49. Proteolytic activity assay and SDS-PAGE analysis verified that L. rhamnosus LAB49 effectively degraded β-casein. In contrast to its parental strain, LGG, the ability of LAB49 to metabolize lactose and degrade casein enabled strong and fast growth in milk. As strains with new properties made by conjugation are not regarded as genetically modified organisms (GMOs), L. rhamnosus LAB49 could be beneficial in dairy fermentations as a probiotic starter culture.IMPORTANCE Probiotic strain Lacticaseibacillus rhamnosus GG (LGG) is widely sold on the market as a probiotic or added as a supplement in dairy foods because of its benefits in human health. However, due to the deficiency of lactose and casein utilization, LGG does not grow well in milk. On the other hand, lactose intolerance and cow's milk protein allergy are the two major problems related to milk consumption. One option to help with these two conditions is the use of probiotic or lactose- and casein-hydrolyzing bacteria in dairy products. The purpose of this study was to equip LGG with lactose/casein-hydrolyzing ability by bacterial conjugation. As a result, we generated a non-GMO LGG derivative with improved properties and better growth in milk.

Efficient Production of Pyruvate Using Metabolically Engineered Lactococcus lactis

Microbial production of commodity chemicals has gained increasing attention and most of the focus has been on reducing the production cost. Selecting a suitable microorganism, which can grow rapidly on cheap feedstocks, is of key importance when developing an economically feasible bioprocess. We chose Lactococcus lactis, a well-characterized lactic acid bacterium, as our microbial host to produce pyruvate, which is a commodity chemical with various important applications. Here we report the engineering of Lactococcus lactis into becoming an efficient microbial platform for producing pyruvate. The strain obtained, FS1076 (MG1363 Δ3 ldh Δpta ΔadhE Δals), was able to produce pyruvate as the sole product. Since all the competitive pathways had been knocked out, we achieved growth-coupled production of pyruvate with high yield. More than 80 percent of the carbon flux was directed toward pyruvate, and a final titer of 54.6 g/L was obtained using a fed-batch fermentation setup. By introducing lactose catabolism into FS1076, we obtained the strain FS1080, which was able to generate pyruvate from lactose. We then demonstrated the potential of FS1080 for valorizing lactose contained in dairy side-streams, by achieving a high titer (40.1 g/L) and high yield (78.6%) of pyruvate using residual whey permeate (RWP) as substrate. The results obtained, show that the L. lactis platform is well-suited for transforming lactose in dairy waste into food-grade pyruvate, and the yields obtained are the highest reported in the literature. These results demonstrate that it is possible to achieve sustainable bioconversion of waste products from the dairy industry (RWP) to valuable products.

Employing lytic phage-mediated horizontal gene transfer in Lactococcus lactis

Lactococcus lactis is a lactic acid bacterium widely used as a starter culture in the manufacture of dairy products, especially a wide variety of cheeses. Improved industrial strains would help to manufacture better food products that can meet the industry's and consumer's demands with respect to e.g. quality, taste, texture and shelf life. Bacteriophage infection of L. lactis starter cultures represents one of the main causes of fermentation failure and consequent economic losses for the dairy industry. In this study, however, we aim at employing bacteriophages for beneficial purposes. We developed an experimental setup to assess whether phage-mediated horizontal gene transfer could be used to enhance the genetic characteristics of L. lactis strains in accordance with the European law regarding the use of genetically modified organisms (GMOs) in the food industry. Although we could not show the transfer of chromosomal DNA we did successfully transduce two dissimilar plasmids from L. lactis strain MG1363 to one of its derivatives employing three different lactococcal bacteriophages.

Editing of the Proteolytic System of Lactococcus lactis Increases Its Bioactive Potential

Large-scale mass spectrometry-based peptidomics for bioactive-peptide discovery is relatively unexplored because of challenges in intracellular peptide extraction and small-peptide identification. Here, we present an analytical pipeline for large-scale intracellular peptidomics of Lactococcus lactis It entails an optimized sample preparation protocol for L. lactis, used as an "enzyme complex" to digest β-casein, an extraction method for its intracellular peptidome, and a peptidomics data analysis and visualization procedure. In addition, we proofread the publicly available bioactive-peptide databases and obtained an optimized database of bioactive peptides derivable from bovine β-casein. We used the pipeline to examine cultures of L. lactis MG1363 and a set of 6 isogenic multiple peptidase mutants incubated with β-casein. We observed a clearly strain-dependent accumulation of peptides with several bioactivities, such as angiotensin-converting enzyme (ACE)-inhibitory, dipeptidyl peptidase 4 (DPP-IV)-inhibitory, and immunoregulatory functions. The results suggest that both the number of different bioactive peptides and the bioactivity diversity can be increased by editing the proteolytic system of L. lactis This comprehensive pipeline offers a model for discovery of bioactive peptides in combination with other proteins and might be applicable to other bacteria.IMPORTANCE Lactic acid bacteria (LAB) are very important for the production of safe and healthy human and animal fermented foods and feed and, increasingly more, in the functional food industry. The intracellular peptidomes of LAB are promising reservoirs of bioactive peptides. We show here that targeted genetic engineering of the peptide degradation pathway allows steering the composition of the peptide pool of the LAB Lactococcus lactis and production of peptides with interesting bioactivities. Our work could be used as a guideline for modifying proteolytic systems in other LAB to further explore their potential as cell peptide factories.

Insight into the Lytic Functions of the Lactococcal Prophage TP712

The lytic cassette of Lactococcus lactis prophage TP712 contains a putative membrane protein of unknown function (Orf54), a holin (Orf55), and a modular endolysin with a N-terminal glycoside hydrolase (GH_25) catalytic domain and two C-terminal LysM domains (Orf56, LysTP712). In this work, we aimed to study the mode of action of the endolysin LysTP712. Inducible expression of the holin-endolysin genes seriously impaired growth. The growth of lactococcal cells overproducing the endolysin LysTP712 alone was only inhibited upon the dissipation of the proton motive force by the pore-forming bacteriocin nisin. Processing of a 26-residues signal peptide is required for LysTP712 activation, since a truncated version without the signal peptide did not impair growth after membrane depolarization. Moreover, only the mature enzyme displayed lytic activity in zymograms, while no lytic bands were observed after treatment with the Sec inhibitor sodium azide. LysTP712 might belong to the growing family of multimeric endolysins. A C-terminal fragment was detected during the purification of LysTP712. It is likely to be synthesized from an alternative internal translational start site located upstream of the cell wall binding domain in the lysin gene. Fractions containing this fragment exhibited enhanced activity against lactococcal cells. However, under our experimental conditions, improved in vitro inhibitory activity of the enzyme was not observed upon the supplementation of additional cell wall binding domains in. Finally, our data pointed out that changes in the lactococcal cell wall, such as the degree of peptidoglycan O-acetylation, might hinder the activity of LysTP712. LysTP712 is the first secretory endolysin from a lactococcal phage described so far. The results also revealed how the activity of LysTP712 might be counteracted by modifications of the bacterial peptidoglycan, providing guidelines to exploit the biotechnological potential of phage endolysins within industrially relevant lactococci and, by extension, other bacteria.

The Lactococcus lactis Pan-Plasmidome

Plasmids are autonomous, self-replicating, extrachromosomal genetic elements that are typically not essential for growth of their host. They may encode metabolic capabilities, which promote the maintenance of these genetic elements, and may allow adaption to specific ecological niches and consequently enhance survival. Genome sequencing of 16 Lactococcus lactis strains revealed the presence of 83 plasmids, including two megaplasmids. The limitations of Pacific Biosciences SMRT sequencing in detecting the total plasmid complement of lactococcal strains is examined, while a combined Illumina/SMRT sequencing approach is proposed to combat these issues. Comparative genome analysis of these plasmid sequences combined with other publicly available plasmid sequence data allowed the definition of the lactococcal plasmidome, and facilitated an investigation into (bio) technologically important plasmid-encoded traits such as conjugation, bacteriocin production, exopolysaccharide (EPS) production, and (bacterio) phage resistance.

Adaptive Evolution of Industrial Lactococcus lactis Under Cell Envelope Stress Provides Phenotypic Diversity

Lactococcus lactis is widely used as a starter in the manufacture of cheese and fermented milk. Its main role is the production of lactic acid, but also contributes to the sensory attributes of cheese. Unfortunately, the diversity of suitable strains to be commercialized as dairy starters is limited. In this work, we have applied adaptive evolution under cell envelope stress (AE-CES) as means to provide evolved L. lactis strains with distinct physiological and metabolic traits. A total of seven strains, three of industrial origin and four wild nisin Z-producing L. lactis, were exposed to subinhibitory concentrations of Lcn972, a bacteriocin that triggers the cell envelope stress response in L. lactis. Stable Lcn972 resistant (Lcn972R) mutants were obtained from all of them and two mutants per strain were further characterized. Minimal inhibitory Lcn972 concentrations increased from 4- to 32-fold compared to their parental strains and the Lcn972R mutants retained similar growth parameters in broth. All the mutants acidified milk to a pH below 5.3 with the exception of one that lost the lactose plasmid during adaptation and was unable to grow in milk, and two others with slower acidification rates in milk. While in general phage susceptibility was unaltered, six mutants derived from three nisin Z producers became more sensitive to phage attack. Loss of a putative plasmid-encoded anti-phage mechanism appeared to be the reason for phage susceptibility. Otherwise, nisin production in milk was not compromised. Different inter- and intra-strain-dependent phenotypes were observed encompassing changes in cell surface hydrophobicity and in their autolytic profile with Lcn972R mutants being, generally, less autolytic. Resistance to other antimicrobials revealed cross-protection mainly to cell wall-active antimicrobials such as lysozyme, bacitracin, and vancomycin. Finally, distinct and shared non-synonymous mutations were detected in the draft genome of the Lcn972R mutants. Depending on the parental strain, mutations were found in genes involved in stress response, detoxification modules, cell envelope biogenesis and/or nucleotide metabolism. As a whole, the results emphasize the different strategies by which each strain becomes resistant to Lcn972 and supports the feasibility of AE-CES as a novel platform to introduce diversity within industrial L. lactis dairy starters.

Fluorescently Labeled DNA Interacts with Competence and Recombination Proteins and Is Integrated and Expressed Following Natural Transformation of Bacillus subtilis

During competence, Bacillus subtilis is able to take up DNA from its environment through the process of transformation. We investigated the ability of B. subtilis to take up fluorescently labeled DNA and found that it is able to take up fluorescein-dUTP-, DyLight 550-dUTP-, and DyLight 650-dUTP-labeled DNA. Transformation with labeled DNA containing an antibiotic cassette resulted in uptake of the labeled DNA and also generated antibiotic-resistant colonies. DNA is primarily taken up at the pole, as it can be seen to colocalize with ComFC, which is a component of the competence machinery. The DNA is taken up rapidly and can be seen to localize with (the actively searching form of) RecA. Colocalization with a homologous locus on the chromosome increases over time. Using microfluidics, we observed replacement of the homologous locus and subsequent expression of the integrated labeled and unlabeled DNA, although whether the integrated DNA contains labeled nucleotides needs to be determined conclusively. Integrated DNA in cells with a doubling time of 60 min is expressed on average 6 h 45 min after the addition of DNA and 4 h 45 min after the addition of fresh medium. We also found that the expression of the incoming DNA under these conditions can occur before cell division and, thus, before complete exit from the competence state. Because the competence machinery is conserved among naturally competent bacteria, this method of labeling is also suitable for studying transformation of other naturally competent bacteria.IMPORTANCE We used DNA that was covalently labeled with fluorescent nucleotides to investigate the transformation process of Bacillus subtilis at the molecular level. We show that the labeled DNA colocalizes with components of the competence machinery, the chromosome, and the recombination protein RecA. Using time-lapse microscopy and microfluidics, we visualized, in real-time, the uptake of fluorescently labeled DNA. We found that under these conditions, cell division is not required for the expression of integrated DNA. Because the competence machinery is conserved in naturally competent bacteria, this method can also be used to investigate the transformation process in many other bacterial species.

Genome Analysis of Lactobacillus plantarum LL441 and Genetic Characterisation of the Locus for the Lantibiotic Plantaricin C

Bacteriocins are ribosomally synthesized peptides produced by bacteria with antimicrobial activity. The bacteriocins produced by lactic acid bacteria (LAB) may inhibit food-borne pathogens and spoilage organisms, and therefore have potential as natural preservatives. Lactobacillus plantarum LL441 produces a lantibiotic bacteriocin known as plantaricin C, a pore-forming antimicrobial peptide containing modified amino acids that inhibits cell wall synthesis by forming a complex with the peptidoglycan precursor lipid II. The present work describes the genome sequencing of L. plantarum LL441 and the characterisation of the plantaricin C locus. The draft genome sequence of L. plantarum LL441 consisted of 170 contigs and had a total 3,124,603 bp; the GC content was 44.52%. The plantaricin C locus was found in an 18 kbp-long contig, and consisted of six genes organized in an operon-like arrangement. This locus included the bacteriocin structural gene (plnC), followed by a gene encoding a LanM-like protein thought to be involved in the maturation of plantaricin C, and four downstream genes encoding ABC-type transporter components, probably belonging to its putative immunity and export machinery. plnC encodes a precursor of the bacteriocin, i.e., a 58-amino acid peptide containing a 31-amino acid double-glycine leader peptide and a 27-amino acid core peptide. In silico analysis and hybridisation experiments placed the plantaricin C locus to be located on pLL441-1, a large plasmid of L. plantarum LL441. Joining up the gaps between the contigs by conventional PCR, sequencing of the amplicons, and sequence assemblage, allowed the complete 55.3 kbp pLL441-1 molecule to be established. A portion of pLL441-1 larger than 34 kbp, which included the plantaricin C region, was identified in a plasmid-derived contig from the L. plantarum Nizo 3893 genome. Further, the plantaricin C coding locus (about 8.7 kbp) was shown to share 91% nucleotide identity with a portion of the plasmids pPECL-6 from Pediococcus claussenii ATCC BAA-344 and pL11995-4 from Lactobacillus paracollinoides TMW 1.1995. Knowledge of the sequence of the plantaricin C coding region will help in studying its molecular components and allow their involvement in bacteriocin synthesis to be investigated, facilitating the use of the bacteriocin or its genetic elements in new biotechnological applications.

Altering textural properties of fermented milk by using surface-engineered Lactococcus lactis

Lactic acid bacteria are widely used for the fermentation of dairy products. While bacterial acidification rates, proteolytic activity and the production of exopolysaccharides are known to influence textural properties of fermented milk products, little is known about the role of the microbial surface on microbe-matrix interactions in dairy products. To investigate how alterations of the bacterial cell surface affect fermented milk properties, 25 isogenic Lactococcus lactis strains that differed with respect to surface charge, hydrophobicity, cell chaining, cell-clumping, attachment to milk proteins, pili expression and EPS production were used to produce fermented milk. We show that overexpression of pili increases surface hydrophobicity of various strains from 3-19% to 94-99%. A profound effect of different cell surface properties was an altered spatial distribution of the cells in the fermented product. Aggregated cells tightly fill the cavities of the protein matrix, while chaining cells seem to be localized randomly. A positive correlation was found between pili overexpression and viscosity and gel hardness of fermented milk. Gel hardness also positively correlated with clumping of cells in the fermented milk. Viscosity of fermented milk was also higher when it was produced with cells with a chaining phenotype or with cells that overexpress exopolysaccharides. Our results show that alteration of cell surface morphology affects textural parameters of fermented milk and cell localization in the product. This is indicative of a cell surface-dependent potential of bacterial cells as structure elements in fermented foods.

Assessing the functionality and genetic diversity of lactococcal prophages

Lactococcus lactis is a lactic acid bacterium that is intensively and globally exploited in commercial dairy food fermentations. Though the presence of prophages in lactococcal genomes is widely reported, only limited studies pertaining to the stability of prophages in lactococcal genomes have been performed. The current study reports on the complete genome exploration of thirty lactococcal strains for the presence of potentially intact prophages, so as to assess their genomic diversity and the associated risk or benefit of harbouring such prophages. Genomic predictions partnered with mitomycin C inductions and flow cytometric analysis of the induced cell lysates confirmed that only four strains consistently produced intact phage particles, thus indicating a relatively low risk associated with prophage induction in the fermentation setting. Our analysis revealed the widespread presence of putative phage-resistance systems encoded by lactococcal prophages, thus highlighting the potential benefits for host fitness. Many of the identified lactococcal prophages belong to the so-called P335 phage group, while a large group of phage remnants bear similarity to members of the 936 phage group. The P335 phage group was recently shown to encompass four distinct genetic lineages. Our study identified an additional lineage, thus expanding the diversity of this industrially significant phage group.

Early Transcriptome Response of Lactococcus lactis to Environmental Stresses Reveals Differentially Expressed Small Regulatory RNAs and tRNAs

Bacteria can deploy various mechanisms to combat environmental stresses. Many genes have previously been identified in Lactococcus lactis that are involved in sensing the stressors and those that are involved in regulating and mounting a defense against the stressful conditions. However, the expression of small regulatory RNAs (sRNAs) during industrially relevant stress conditions has not been assessed yet in L. lactis, while sRNAs have been shown to be involved in many stress responses in other bacteria. We have previously reported the presence of hundreds of putative regulatory RNAs in L. lactis, and have used high-throughput RNA sequencing (RNA-seq) in this study to assess their expression under six different stress conditions. The uniformly designed experimental set-up enabled a highly reliable comparison between the different stress responses and revealed that many sRNAs are differentially expressed under the conditions applied. The primary stress responses of L. lactis NCDO712 was benchmarked to earlier work and, for the first time, the differential expression was assessed of transfer RNAs (tRNAs) and the genes from the six recently sequenced plasmids of NCDO712. Although, we only applied stresses for 5 min, the majority of the well-known specific stress-induced genes are already differentially expressed. We find that most tRNAs decrease after all stresses applied, except for a small number, which are increased upon cold stress. Starvation was shown to induce the highest differential response, both in terms of number and expression level of genes. Our data pinpoints many novel stress-related uncharacterized genes and sRNAs, which calls for further assessment of their molecular and cellular function. These insights furthermore could impact the way parameters are designed for bacterial culture production and milk fermentation, as we find that very short stress conditions already greatly alter gene expression.

Cell Surface Properties of Lactococcus lactis Reveal Milk Protein Binding Specifically Evolved in Dairy Isolates

Surface properties of bacteria are determined by the molecular composition of the cell wall and they are important for interactions of cells with their environment. Well-known examples of bacterial interactions with surfaces are biofilm formation and the fermentation of solid materials like food and feed. Lactococcus lactis is broadly used for the fermentation of cheese and buttermilk and it is primarily isolated from either plant material or the dairy environment. In this study, we characterized surface hydrophobicity, charge, emulsification properties, and the attachment to milk proteins of 55 L. lactis strains in stationary and exponential growth phases. The attachment to milk protein was assessed through a newly developed flow cytometry-based protocol. Besides finding a high degree of biodiversity, phenotype-genotype matching allowed the identification of candidate genes involved in the modification of the cell surface. Overexpression and gene deletion analysis allowed to verify the predictions for three identified proteins that altered surface hydrophobicity and attachment of milk proteins. The data also showed that lactococci isolated from a dairy environment bind higher amounts of milk proteins when compared to plant isolates. It remains to be determined whether the alteration of surface properties also has potential to alter starter culture functionalities.

Chromosome segregation drives division site selection in Streptococcus pneumoniae

Accurate spatial and temporal positioning of the tubulin-like protein FtsZ is key for proper bacterial cell division. Streptococcus pneumoniae (pneumococcus) is an oval-shaped, symmetrically dividing opportunistic human pathogen lacking the canonical systems for division site control (nucleoid occlusion and the Min-system). Recently, the early division protein MapZ was identified and implicated in pneumococcal division site selection. We show that MapZ is important for proper division plane selection; thus, the question remains as to what drives pneumococcal division site selection. By mapping the cell cycle in detail, we show that directly after replication both chromosomal origin regions localize to the future cell division sites, before FtsZ. Interestingly, Z-ring formation occurs coincidently with initiation of DNA replication. Perturbing the longitudinal chromosomal organization by mutating the condensin SMC, by CRISPR/Cas9-mediated chromosome cutting, or by poisoning DNA decatenation resulted in mistiming of MapZ and FtsZ positioning and subsequent cell elongation. Together, we demonstrate an intimate relationship between DNA replication, chromosome segregation, and division site selection in the pneumococcus, providing a simple way to ensure equally sized daughter cells.

From Genome to Phenotype: An Integrative Approach to Evaluate the Biodiversity of Lactococcus lactis

Lactococcus lactis is one of the most extensively used lactic acid bacteria for the manufacture of dairy products. Exploring the biodiversity of L. lactis is extremely promising both to acquire new knowledge and for food and health-driven applications. L. lactis is divided into four subspecies: lactis, cremoris, hordniae and tructae, but only subsp. lactis and subsp. cremoris are of industrial interest. Due to its various biotopes, Lactococcus subsp. lactis is considered the most diverse. The diversity of L. lactis subsp. lactis has been assessed at genetic, genomic and phenotypic levels. Multi-Locus Sequence Type (MLST) analysis of strains from different origins revealed that the subsp. lactis can be classified in two groups: “domesticated” strains with low genetic diversity, and “environmental” strains that are the main contributors of the genetic diversity of the subsp. lactis. As expected, the phenotype investigation of L. lactis strains reported here revealed highly diverse carbohydrate metabolism, especially in plant- and gut-derived carbohydrates, diacetyl production and stress survival. The integration of genotypic and phenotypic studies could improve the relevance of screening culture collections for the selection of strains dedicated to specific functions and applications.

Characterization of prophages of Lactococcus garvieae

This report describes the morphological characterization and genome analysis of an induced prophage (PLg-TB25) from a dairy strain of Lactococcus garvieae. The phage belongs to the Siphoviridae family and its morphology is typical of other lactococcal phages. A general analysis of its genome did not reveal similarities with other lactococcal phage genomes, confirming its novelty. However, similarities were found between genes of its morphogenesis cluster and genes of Gram-positive bacteria, suggesting that this phage genome resulted from recombination events that took place in a heterogeneous microbial environment. An in silico search for other prophages in 16 L. garvieae genomes available in public databases, uncovered eight seemingly complete prophages in strains isolated from dairy and fish niches. Genome analyses of these prophages revealed three novel L. garvieae phages. The remaining prophages had homology to phages of Lactococcus lactis (P335 group) suggesting a close relationship between these lactococcal species. The similarity in GC content of L. garvieae prophages to the genomes of L. lactis phages further supports the hypothesis that these phages likely originated from the same ancestor.

Plasmid Complement of Lactococcus lactis NCDO712 Reveals a Novel Pilus Gene Cluster

Lactococcus lactis MG1363 is an important gram-positive model organism. It is a plasmid-free and phage-cured derivative of strain NCDO712. Plasmid-cured strains facilitate studies on molecular biological aspects, but many properties which make L. lactis an important organism in the dairy industry are plasmid encoded. We sequenced the total DNA of strain NCDO712 and, contrary to earlier reports, revealed that the strain carries 6 rather than 5 plasmids. A new 50-kb plasmid, designated pNZ712, encodes functional nisin immunity (nisCIP) and copper resistance (lcoRSABC). The copper resistance could be used as a marker for the conjugation of pNZ712 to L. lactis MG1614. A genome comparison with the plasmid cured daughter strain MG1363 showed that the number of single nucleotide polymorphisms that accumulated in the laboratory since the strains diverted more than 30 years ago is limited to 11 of which only 5 lead to amino acid changes. The 16-kb plasmid pSH74 was found to contain a novel 8-kb pilus gene cluster spaCB-spaA-srtC1-srtC2, which is predicted to encode a pilin tip protein SpaC, a pilus basal subunit SpaB, and a pilus backbone protein SpaA. The sortases SrtC1/SrtC2 are most likely involved in pilus polymerization while the chromosomally encoded SrtA could act to anchor the pilus to peptidoglycan in the cell wall. Overexpression of the pilus gene cluster from a multi-copy plasmid in L. lactis MG1363 resulted in cell chaining, aggregation, rapid sedimentation and increased conjugation efficiency of the cells. Electron microscopy showed that the over-expression of the pilus gene cluster leads to appendices on the cell surfaces. A deletion of the gene encoding the putative basal protein spaB, by truncating spaCB, led to more pilus-like structures on the cell surface, but cell aggregation and cell chaining were no longer observed. This is consistent with the prediction that spaB is involved in the anchoring of the pili to the cell.

Stimulation of acetoin production in metabolically engineered Lactococcus lactis by increasing ATP demand

Having a sufficient supply of energy, usually in the form of ATP, is essential for all living organisms. In this study, however, we demonstrate that it can be beneficial to reduce ATP availability when the objective is microbial production. By introducing the ATP hydrolyzing F₁-ATPase into a Lactococcus lactis strain engineered into producing acetoin, we show that production titer and yield both can be increased. At high F₁-ATPase expression level, the acetoin production yield could be increased by 10 %; however, because of the negative effect that the F₁-ATPase had on biomass yield and growth, this increase was at the cost of volumetric productivity. By lowering the expression level of the F₁-ATPase, both the volumetric productivity and the final yield could be increased by 5 % compared to the reference strain not overexpressing the F₁-ATPase, and in batch fermentation, it was possible to convert 176 mM (32 g/L) of glucose into 146.5 mM (12.9 g/L) acetoin with a yield of 83 % of the theoretical maximum. To further demonstrate the potential of the cell factory developed, we complemented it with the lactose plasmid pLP712, which allowed for growth and acetoin production from a dairy waste stream, deproteinized whey. Using this cheap and renewable feedstock, efficient acetoin production with a titer of 157 mM (14 g/L) acetoin was accomplished.

A novel cell factory for efficient production of ethanol from dairy waste

BACKGROUND

Sustainable and economically feasible ways to produce ethanol or other liquid fuels are becoming increasingly relevant due to the limited supply of fossil fuels and the environmental consequences associated with their consumption. Microbial production of fuel compounds has gained a lot of attention and focus has mostly been on developing bio-processes involving non-food plant biomass feedstocks. The high cost of the enzymes needed to degrade such feedstocks into its constituent sugars as well as problems due to various inhibitors generated in pretreatment are two challenges that have to be addressed if cost-effective processes are to be established. Various industries, especially within the food sector, often have waste streams rich in carbohydrates and/or other nutrients, and these could serve as alternative feedstocks for such bio-processes. The dairy industry is a good example, where large amounts of cheese whey or various processed forms thereof are generated. Because of their nutrient-rich nature, these substrates are particularly well suited as feedstocks for microbial production.

RESULTS

We have generated a Lactococcus lactis strain which produces ethanol as its sole fermentation product from the lactose contained in residual whey permeate (RWP), by introducing lactose catabolism into a L. lactis strain CS4435 (MG1363 Δ(3) ldh, Δpta, ΔadhE, pCS4268), where the carbon flow has been directed toward ethanol instead of lactate. To achieve growth and ethanol production on RWP, we added corn steep liquor hydrolysate (CSLH) as the nitrogen source. The outcome was efficient ethanol production with a titer of 41 g/L and a yield of 70 % of the theoretical maximum using a fed-batch strategy. The combination of a low-cost medium from industrial waste streams and an efficient cell factory should make the developed process industrially interesting.

CONCLUSIONS

A process for the production of ethanol using L. lactis and a cheap renewable feedstock was developed. The results demonstrate that it is possible to achieve sustainable bioconversion of waste products from the dairy industry (RWP) and corn milling industry (CSLH) to ethanol and the process developed shows great potential for commercial realization.

Plasmids from Food Lactic Acid Bacteria: Diversity, Similarity, and New Developments

Plasmids are widely distributed in different sources of lactic acid bacteria (LAB) as self-replicating extrachromosomal genetic materials, and have received considerable attention due to their close relationship with many important functions as well as some industrially relevant characteristics of the LAB species. They are interesting with regard to the development of food-grade cloning vectors. This review summarizes new developments in the area of lactic acid bacteria plasmids and aims to provide up to date information that can be used in related future research.

The Plasmid Complement of the Cheese Isolate Lactococcus garvieae IPLA 31405 Revealed Adaptation to the Dairy Environment

Lactococcus garvieae is a lactic acid bacterium found in raw-milk dairy products as well as a range of aquatic and terrestrial environments. The plasmids in L. garvieae have received little attention compared to those of dairy Lactococcus lactis, in which the genes carried by these extrachromosomal elements are considered of adaptive value. The present work reports the sequencing and analysis of the plasmid complement of L. garvieae IPLA 31405, a strain isolated from a traditional, Spanish, starter-free cheese made from raw-milk. It consists of pLG9 and pLG42, of 9,124 and 42,240 nucleotides, respectively. Based on sequence and structural homology in the putative origin of replication (ori) region, pLG9 and pLG42 are predicted to replicate via a theta mechanism. Real-time, quantitative PCR showed the number of copies per chromosome equivalent of pLG9 and pLG42 to be around two and five, respectively. Sequence analysis identified eight complete open reading frames (orfs) in pLG9 and 36 in pLG42; these were organized into functional modules or cassettes containing different numbers of genes. These modules were flanked by complete or interrupted insertion sequence (IS)-like elements. Among the modules of pLG42 was a gene cluster encoding specific components of a phosphoenolpyruvate-phosphotransferase (PEP-PTS) system, including a phospho-β-galacosidase. The cluster showed a complete nucleotide identity respect to that in plasmids of L. lactis. Loss of pLG42 showed this to be involved in lactose assimilation. In the same plasmid, an operon encoding a type I restriction/modification (R/M) system was also identified. The specificity of this R/M system might be broadened by different R/M specificity subunits detected in pLG9 and in the bacterial chromosome. However, challenges of L. garvieae IPLA 31405 against L. lactis phages proved that the R/M system was not involved in phage resistance. Together, these results support the hypothesis that, as in L. lactis, pLG42 contribute towards the adaptation of L. garvieae to the dairy environment.

Early adaptation to oxygen is key to the industrially important traits of Lactococcus lactis ssp. cremoris during milk fermentation

Background

Lactococcus lactis is the most used species in the dairy industry. Its ability to adapt to technological stresses, such as oxidative stress encountered during stirring in the first stages of the cheese-making process, is a key factor to measure its technological performance. This study aimed to understand the response to oxidative stress of Lactococcus lactis subsp. cremoris MG1363 at the transcriptional and metabolic levels in relation to acidification kinetics and growth conditions, especially at an early stage of growth. For those purposes, conditions of hyper-oxygenation were initially fixed for the fermentation.

Results

Kinetics of growth and acidification were not affected by the presence of oxygen, indicating a high resistance to oxygen of the L. lactis MG1363 strain. Its resistance was explained by an efficient consumption of oxygen within the first 4 hours of culture, leading to a drop of the redox potential. The efficient consumption of oxygen by the L. lactis MG1363 strain was supported by a coherent and early adaptation to oxygen after 1 hour of culture at both gene expression and metabolic levels. In oxygen metabolism, the over-expression of all the genes of the nrd (ribonucleotide reductases) operon or fhu (ferrichrome ABC transports) genes was particularly significant. In carbon metabolism, the presence of oxygen led to an early shift at the gene level in the pyruvate pathway towards the acetate/2,3-butanediol pathway confirmed by the kinetics of metabolite production. Finally, the MG1363 strain was no longer able to consume oxygen in the stationary growth phase, leading to a drastic loss of culturability as a consequence of cumulative stresses and the absence of gene adaptation at this stage.

Conclusions

Combining metabolic and transcriptomic profiling, together with oxygen consumption kinetics, yielded new insights into the whole genome adaptation of L. lactis to initial oxidative stress. An early and transitional adaptation to oxidative stress was revealed for L. lactis subsp. cremoris MG1363 in the presence of initially high levels of oxygen. This enables the cells to maintain key traits that are of great importance for industry, such as rapid acidification and reduction of the redox potential of the growth media.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2164-15-1054) contains supplementary material, which is available to authorized users.

From field to fermentation: the origins of Lactococcus lactis and its domestication to the dairy environment

Lactococcus lactis is an organism of substantial economic importance, used extensively in the production of fermented foods and widely held to have evolved from plant strains. The domestication of this organism to the milk environment is associated with genome reduction and gene decay, and the acquisition of specific genes involved in protein and lactose utilisation by horizontal gene transfer. In recent years, numerous studies have focused on uncovering the physiology and molecular biology of lactococcal strains from the wider environment for exploitation in the dairy industry. This in turn has facilitated comparative genome analysis of lactococci from different environments and provided insight into the natural phenotypic and genetic diversity of L. lactis. This diversity may be exploited in dairy fermentations to develop products with improved quality and sensory attributes. In this review, we discuss the classification of L. lactis and the problems that arise with phenotype/genotype designation. We also discuss the adaptation of non-dairy lactococci to milk, the traits associated with this adaptation and the potential application of non-dairy lactococci to dairy fermentations.

The Lactococcus lactis plasmidome: much learnt, yet still lots to discover

Lactococcus lactis is used extensively worldwide for the production of a variety of fermented dairy products. The ability of L. lactis to successfully grow and acidify milk has long been known to be reliant on a number of plasmid-encoded traits. The recent availability of low-cost, high-quality genome sequencing, and the quest for novel, technologically desirable characteristics, such as novel flavour development and increased stress tolerance, has led to a steady increase in the number of available lactococcal plasmid sequences. We will review both well-known and very recent discoveries regarding plasmid-encoded traits of biotechnological significance. The acquired lactococcal plasmid sequence information has in recent years progressed our understanding of the origin of lactococcal dairy starter cultures. Salient points on the acquisition and evolution of lactococcal plasmids will be discussed in this review, as well as prospects of finding novel plasmid-encoded functions.

A bacteriocin gene cluster able to enhance plasmid maintenance in Lactococcus lactis

BACKGROUND

Lactococcus lactis is widely used as a dairy starter and has been extensively studied. Based on the acquired knowledge on its physiology and metabolism, new applications have been envisaged and there is an increasing interest of using L. lactis as a cell factory. Plasmids constitute the main toolbox for L. lactis genetic engineering and most rely on antibiotic resistant markers for plasmid selection and maintenance. In this work, we have assessed the ability of the bacteriocin Lactococcin 972 (Lcn972) gene cluster to behave as a food-grade post-segregational killing system to stabilize recombinant plasmids in L. lactis in the absence of antibiotics. Lcn972 is a non-lantibiotic bacteriocin encoded by the 11-kbp plasmid pBL1 with a potent antimicrobial activity against Lactococcus.

RESULTS

Attempts to clone the full lcn972 operon with its own promoter (P972), the structural gene lcn972 and the immunity genes orf2-orf3 in the unstable plasmid pIL252 failed and only plasmids with a mutated promoter were recovered. Alternatively, cloning under other constitutive promoters was approached and achieved, but bacteriocin production levels were lower than those provided by pBL1. Segregational stability studies revealed that the recombinant plasmids that yielded high bacteriocin titers were maintained for at least 200 generations without antibiotic selection. In the case of expression vectors such as pTRL1, the Lcn972 gene cluster also contributed to plasmid maintenance without compromising the production of the fluorescent mCherry protein. Furthermore, unstable Lcn972 recombinant plasmids became integrated into the chromosome through the activity of insertion sequences, supporting the notion that Lcn972 does apply a strong selective pressure against susceptible cells. Despite of it, the Lcn972 gene cluster was not enough to avoid the use of antibiotics to select plasmid-bearing cells right after transformation.

CONCLUSIONS

Inserting the Lcn972 cluster into segregational unstable plasmids prevents their lost by segregation and probable could be applied as an alternative to the use of antibiotics to support safer and more sustainable biotechnological applications of genetically engineered L. lactis.

Lack of the host membrane protease FtsH hinders release of the Lactococcus lactis bacteriophage TP712

The temperate bacteriophage TP712 was unable to plaque on Lactococcus lactis ΔftsH lacking the membrane protease FtsH and complementation in trans restored the WT phenotype. Absence of ftsH did not hinder phage adsorption, phage DNA delivery or activation of the lytic cycle. Thin sections revealed that TP712 virions appeared to be correctly assembled inside the ΔftsH host, but were not released. These virions were infective, demonstrating that a functional host FtsH is required by TP712 to proceed effectively with lysis of the host.

Interaction between the genomes of Lactococcus lactis and phages of the P335 species

Phages of the P335 species infect Lactococcus lactis and have been particularly studied because of their association with strains of L. lactis subsp. cremoris used as dairy starter cultures. Unlike other lactococcal phages, those of the P335 species may have a temperate or lytic lifestyle, and are believed to originate from the starter cultures themselves. We have sequenced the genome of L. lactis subsp. cremoris KW2 isolated from fermented corn and found that it contains an integrated P335 species prophage. This 41 kb prophage (Φ KW2) has a mosaic structure with functional modules that are highly similar to several other phages of the P335 species associated with dairy starter cultures. Comparison of the genomes of 26 phages of the P335 species, with either a lytic or temperate lifestyle, shows that they can be divided into three groups and that the morphogenesis gene region is the most conserved. Analysis of these phage genomes in conjunction with the genomes of several L. lactis strains shows that prophage insertion is site specific and occurs at seven different chromosomal locations. Exactly how induced or lytic phages of the P335 species interact with carbohydrate cell surface receptors in the host cell envelope remains to be determined. Genes for the biosynthesis of a variable cell surface polysaccharide and for lipoteichoic acids (LTAs) are found in L. lactis and are the main candidates for phage receptors, as the genes for other cell surface carbohydrates have been lost from dairy starter strains. Overall, phages of the P335 species appear to have had only a minor role in the adaptation of L. lactis subsp. cremoris strains to the dairy environment, and instead they appear to be an integral part of the L. lactis chromosome. There remains a great deal to be discovered about their role, and their contribution to the evolution of the bacterial genome.