Molecular junctions by joining single-walled carbon nanotubes

The Formation and Transformation of Low-Dimensional Carbon Nanomaterials by Electron Irradiation

Low-dimensional materials based on graphene or graphite show a large variety of phenomena when they are subjected to irradiation with energetic electrons. Since the 1990s, electron microscopy studies, where a certain irradiation dose is unavoidable, have witnessed unexpected structural transformations of graphitic nanoparticles. It is recognized that electron irradiation is not only detrimental but also bears considerable potential in the formation of new graphitic structures. With the availability of aberration-corrected electron microscopes and the discovery of techniques to produce monolayers of graphene, detailed insight into the atomic processes occurring during electron irradiation became possible. Threshold energies for atom displacements are determined and models of different types of lattice vacancies are confirmed experimentally. However, experimental evidence for the configuration of interstitial atoms in graphite or adatoms on graphene remained indirect, and the understanding of defect dynamics still depends on theoretical concepts. This article reviews irradiation phenomena in graphene- or graphite-based nanomaterials from the scale of single atoms to tens of nanometers. Observations from the 1990s can now be explained on the basis of new results. The evolution of the understanding during three decades of research is presented, and the remaining problems are pointed out.

Electron irradiation effects in transmission electron microscopy: Random displacements and collective migrations

Electron beam damage in transmission electron microscopy (TEM) is complicated because the damage phenomena can be the result of random atomic displacements or collective migrations. The former is categorized as the primary beam effects and the latter is the secondary beam effects. The mechanisms for these two distinguishing atomic processes of damage are different. The primary beam effects can be caused by the mechanisms of knock-on and/or radiolysis, while the secondary effects must be driven by a field that is induced by electron irradiation. One such field has been identified to be the electric field produced by the accumulated charges due to the ejection of secondary and Auger electrons from the irradiated region. One convincing example is the electron irradiation-induced domain switch in ferroelectric materials, in which the collective cation displacements are driven by the induced electric field. A detailed interpretation is given in this review. The sintering of metal NPs under electron irradiation is a secondary beam effect and is most likely also caused by the induced electric fields. The interactions between the charged NP and substrate, and between charged NPs, result in NP motion. Interchanging atoms between NPs during the sintering may also be driven by the electric fields. Although many beam-damage phenomena in C nanotubes and layered materials, such as graphene, BN, and transition metal dichalcogenides, are caused by the primary beam effects and have been well studied experimentally and theoretically in the literature, some phenomena from the secondary beam effects have also been identified in this review. These phenomena are sensitive to electron current density, the shape and orientation of the specimen, and even the illumination mode (i.e., TEM or STEM). Unfortunately, the mechanisms responsible for these phenomena still need to be clarified.

Frequency dynamics of a chain of magnetized rotors: dumbbell model vs Landau-Lifshitz equation

During the past decades magnetic materials and structures that span several length scales have been of interest mainly due to their application in data storage and processing, flexible electronics, medicine, between others. From a microscopic point of view, these systems are typically studied using the Landau-Lifshitz equation (LLE), while approaches such as the dumbbell model are used to study macroscopic magnetic structures. In this work we use both the LLE and the dumbbell model to study spin chains of various lengths under the effect of a time dependent-magnetic field, allowing us to compare qualitatively the results obtained by both approaches. This has allowed us to identify and describe in detail several frequency modes that appear, with additional modes arising as the chain length increases. Moreover, we find that high frequency modes tend to be absorbed by lower frequency ones as the amplitude of the field increases. The results obtained in this work are of interest not only to better understand the behavior of the macroscopic spins chains, but also expands the available tools for qualitative studies of both macroscopic and microscopic versions of the studied system, or more complex structures such as junctions or lattices. This would allow to study the qualitative behavior of microscopic systems (e.g. nanoparticles) using macroscopic arrays of magnets, and vice versa.

Nanoscale thermoplasmonic welding

Establishing direct, close contact between individual nano-objects is crucial to fabricating hierarchical and multifunctional nanostructures. Nanowelding is a technical prerequisite for successfully manufacturing such structures. In this paper, we review the nanoscale thermoplasmonic welding with a focus on its physical mechanisms, key influencing factor, and emerging applications. The basic mechanisms are firstly described from the photothermal conversion to self-limited heating physics. Key aspects related to the welding process including material scrutinization, nanoparticle geometric and spatial configuration, heating scheme and performance characterization are then discussed in terms of the distinctive properties of plasmonic welding. Based on the characteristics of high precision and flexible platform of thermoplasmonic welding, the potential applications are further highlighted from electronics and optics to additive manufacturing. Finally, the future challenges and prospects are outlined for future prospects of this dynamic field. This work summarizes these innovative concepts and works on thermoplasmonic welding, which is significant to establish a common link between nanoscale welding and additive manufacturing communities.

Influence of Defect Number, Distribution Continuity and Orientation on Tensile Strengths of the CNT-Based Networks: A Molecular Dynamics Study

Networks based on carbon nanotube (CNT) have been widely utilized to fabricate flexible electronic devices, but defects inevitably exist in these structures. In this study, we investigate the influence of the CNT-unit defects on the mechanical properties of a honeycomb CNT-based network, super carbon nanotube (SCNT), through molecular dynamics simulations. Results show that tensile strengths of the defective SCNTs are affected by the defect number, distribution continuity and orientation. Single-defect brings 0 ~ 25% reduction of the tensile strength with the dependency on defect position and the reduction is over 50% when the defect number increases to three. The distribution continuity induces up to 20% differences of tensile strengths for SCNTs with the same defect number. A smaller arranging angle of defects to the tensile direction leads to a higher tensile strength. Defective SCNTs possess various modes of stress concentration with different concentration degrees under the combined effect of defect number, arranging direction and continuity, for which the underlying mechanism can be explained by the effective crack length of the fracture mechanics. Fundamentally, the force transmission mode of the SCNT controls the influence of defects and the cases that breaking more force transmission paths cause larger decreases of tensile strengths. Defects are non-negligible factors of the mechanical properties of CNT-based networks and understanding the influence of defects on CNT-based networks is valuable to achieve the proper design of CNT-based electronic devices with better performances.

Electron beam-induced athermal nanowelding of crossing SiOx amorphous nanowires

Athermal welding of crossing SiOx nanowires under e-beam irradiation is in situ observed by TEM. A relevant simulation considering nanocurvature effect and athermal activation effect gives the corresponding 3D structural evolution and the velocity field of atom migration.

Nanowelding in Whole-Lifetime Bottom-Up Manufacturing: From Assembly to Service

The continuous miniaturization of microelectronics is pushing the transformation of nanomanufacturing modes from top-down to bottom-up. Bottom-up manufacturing is essentially the way of assembling nanostructures from atoms, clusters, quantum dots, etc. The assembly process relies on nanowelding which also existed in the synthesis process of nanostructures, construction and repair of nanonetworks, interconnects, integrated circuits, and nanodevices. First, many kinds of novel nanomaterials and nanostructures from 0D to 1D, and even 2D are synthesized by nanowelding. Second, the connection of nanostructures and interfaces between metal/semiconductor-metal/semiconductor is realized through low-temperature heat-assisted nanowelding, mechanical-assisted nanowelding, or cold welding. Finally, 2D and 3D interconnects, flexible transparent electrodes, integrated circuits, and nanodevices are constructed, functioned, or self-healed by nanowelding. All of the three nanomanufacturing stages follow the rule of "oriented attachment" mechanisms. Thus, the whole-lifetime bottom-up manufacturing process from the synthesis and connection of nanostructures to the construction and service of nanodevices can be organically integrated by nanowelding. The authors hope this review can bring some new perspective in future semiconductor industrialization development in the expansion of multi-material systems, technology pathway for the refined design, controlled synthesis and in situ characterization of complex nanostructures, and the strategies to develop and repair novel nanodevices in service.

Electrically Conductive Networks from Hybrids of Carbon Nanotubes and Graphene Created by Laser Radiation

A technology for the formation of electrically conductive nanostructures from single-walled carbon nanotubes (SWCNT), multi-walled carbon nanotubes (MWCNT), and their hybrids with reduced graphene oxide (rGO) on Si substrate has been developed. Under the action of single pulses of laser irradiation, nanowelding of SWCNT and MWCNT nanotubes with graphene sheets was obtained. Dependences of electromagnetic wave absorption by films of short and long nanotubes with subnanometer and nanometer diameters on wavelength are calculated. It was determined from dependences that absorption maxima of various types of nanotubes are in the wavelength region of about 266 nm. It was found that contact between nanotube and graphene was formed in time up to 400 fs. Formation of networks of SWCNT/MWCNT and their hybrids with rGO at threshold energy densities of 0.3/0.5 J/cm² is shown. With an increase in energy density above the threshold value, formation of amorphous carbon nanoinclusions on the surface of nanotubes was demonstrated. For all films, except the MWCNT film, an increase in defectiveness after laser irradiation was obtained, which is associated with appearance of C–C bonds with neighboring nanotubes or graphene sheets. CNTs played the role of bridges connecting graphene sheets. Laser-synthesized hybrid nanostructures demonstrated the highest hardness compared to pure nanotubes. Maximum hardness (52.7 GPa) was obtained for MWCNT/rGO topology. Regularity of an increase in electrical conductivity of nanostructures after laser irradiation has been established for films made of all nanomaterials. Hybrid structures of nanotubes and graphene sheets have the highest electrical conductivity compared to networks of pure nanotubes. Maximum electrical conductivity was obtained for MWCNT/rGO hybrid structure (~22.6 kS/m). Networks of nanotubes and CNT/rGO hybrids can be used to form strong electrically conductive interconnections in nanoelectronics, as well as to create components for flexible electronics and bioelectronics, including intelligent wearable devices (IWDs).

A Thermal Transport Study of Branched Carbon Nanotubes with Cross and T-Junctions

This study investigated the thermal transport behaviors of branched carbon nanotubes (CNTs) with cross and T-junctions through non-equilibrium molecular dynamics (NEMD) simulations. A hot region was created at the end of one branch, whereas cold regions were created at the ends of all other branches. The effects on thermal flow due to branch length, topological defects at junctions, and temperature were studied. The NEMD simulations at room temperature indicated that heat transfer tended to move sideways rather than straight in branched CNTs with cross-junctions, despite all branches being identical in chirality and length. However, straight heat transfer was preferred in branched CNTs with T-junctions, irrespective of the atomic configuration of the junction. As branches became longer, the heat current inside approached the values obtained through conventional prediction based on diffusive thermal transport. Moreover, directional thermal transport behaviors became prominent at a low temperature (50 K), which implied that ballistic phonon transport contributed greatly to directional thermal transport. Finally, the collective atomic velocity cross-correlation spectra between branches were used to analyze phonon transport mechanisms for different junctions. Our findings deeply elucidate the thermal transport mechanisms of branched CNTs, which aid in thermal management applications.

PyXtal_FF: a python library for automated force field generation

We present PyXtal_FF—a package based on Python programming language—for developing machine learning potentials (MLPs). The aim of PyXtal_FF is to promote the application of atomistic simulations through providing several choices of atom-centered descriptors and machine learning regressions in one platform. Based on the given choice of descriptors (including the atom-centered symmetry functions, embedded atom density, SO4 bispectrum, and smooth SO3 power spectrum), PyXtal_FF can train MLPs with either generalized linear regression or neural network models, by simultaneously minimizing the errors of energy/forces/stress tensors in comparison with the data from ab-initio simulations. The trained MLP model from PyXtal_FF is interfaced with the Atomic Simulation Environment (ASE) package, which allows different types of light-weight simulations such as geometry optimization, molecular dynamics simulation, and physical properties prediction. Finally, we will illustrate the performance of PyXtal_FF by applying it to investigate several material systems, including the bulk SiO2, high entropy alloy NbMoTaW, and elemental Pt for general purposes. Full documentation of PyXtal_FF is available at https://pyxtal-ff.readthedocs.io.

Mechanical Characterisation of Single-Walled Carbon Nanotube Heterojunctions: Numerical Simulation Study

The elastic properties of single-walled carbon nanotube heterojunctions were investigated using conventional tensile, bending and torsion tests. A three-dimensional finite element model was built in order to describe the elastic behaviour of cone heterojunctions (armchair-armchair and zigzag-zigzag). This comprehensive systematic study, to evaluate the tensile, bending and torsional rigidities of heterojunctions, enabled the formulation analytical methods for easy assessment of the elastic properties of heterojunctions using a wide range of their geometrical parameters.

Effective 1D Time-Dependent Schrödinger Equations for 3D Geometrically Correlated Systems

The so-called Born–Huang ansatz is a fundamental tool in the context of ab-initio molecular dynamics, viz., it allows effectively separating fast and slow degrees of freedom and thus treating electrons and nuclei with different mathematical footings. Here, we consider the use of a Born–Huang-like expansion of the three-dimensional time-dependent Schrödinger equation to separate transport and confinement degrees of freedom in electron transport problems that involve geometrical constrictions. The resulting scheme consists of an eigenstate problem for the confinement degrees of freedom (in the transverse direction) whose solution constitutes the input for the propagation of a set of coupled one-dimensional equations of motion for the transport degree of freedom (in the longitudinal direction). This technique achieves quantitative accuracy using an order less computational resources than the full dimensional simulation for a typical two-dimensional geometrical constriction and upto three orders for three-dimensional constriction.

From coordination polymer to carbon nanotube: Preparation, characterization and rapid adsorption capacity toward organic pollutants

A CuI coordination polymer based on the N,N’-bis(3-pyridinecarboxamide)-1,4-butane (3-dpyb) ligand, namely [Cu(3-dpyb)0.5Cl], is hydrothermally synthesized and structurally characterized, and is used as a catalyst precursor to synthesize multi-walled carbon nanotubes. Interestingly, the as-grown multi-walled carbon nanotubes exhibit high performance in removing dyes from solution and can serve as a low-cost and fast adsorbent. In addition, the adsorption behavior of this new adsorbent fits well with the Freundlich isotherm and the pseudo-second-order kinetic model.

Protein-Polymer Matrices with Embedded Carbon Nanotubes for Tissue Engineering: Regularities of Formation and Features of Interaction with Cell Membranes

This paper reveals the mechanism of nanowelding a branched network of single-walled carbon nanotubes (SWCNTs) used as a framework for the formation of protein-polymer matrices with albumin, collagen, and chitosan. It is shown that the introduction of certain point defects into the structure of SWCNTs (single vacancy, double vacancy, Stone-Wales defect, and a mixed defect) allows us to obtain strong heating in defective regions as compared to ideal SWCNTs. The wavelengths at which absorption reaches 50% are determined. Non-uniform absorption of laser radiation along with inefficient heat removal in defective regions determines the formation of hot spots, in which nanowelding of SWCNTs is observed even at 0.36 nm between contacting surfaces. The regularities of formation of layered protein-polymer matrices and the features of their interaction with cell membrane are revealed. All studies are carried out in silico using high-precision quantum approaches.

Nanoscale modification of one-dimensional single-crystalline cuprous oxide

In this work we report for the first time a method to modify the surface of Cu₂O nanowires in a controllable way and physically weld them into a network form, which contributes to higher electrical conductivity as well as a strong water-repelling nature. We have used state-of-the-art theoretical calculations to support our experimental observations. We demonstrate how varying the irradiation fluence can modulate the surface and decorate the nanowire with a uniform distribution of Cu₈O nanocrystals due to preferential sputtering. While several well studied joining techniques are available for carbon and metal-based nanowires, the same information for ceramic nanowires is scarce at present. The current study sheds light into this and a state-of-the-art 3D simulation technique predicts most of the modifications including surface modulation, oxygen depletion and welding. The welded network shows higher electrical conductivity than the unwelded assembly. With Cu₂O being of p-type the current ion beam joining technique shows a novel path for fabricating p-i-n junctions or solar cell devices through bottom-up approach. Furthermore, we have explored the response of this network to moisture. Our calculation based on density functional theory predicts the hydrophilic nature of individual copper oxide nanowires both before and after irradiation. However, the network shows a strong water-repelling nature, which has been explained quantitatively using the Cassie-Baxter model.

Carbon Nanotube Assembly and Integration for Applications

Carbon nanotubes (CNTs) have attracted significant interest due to their unique combination of properties including high mechanical strength, large aspect ratios, high surface area, distinct optical characteristics, high thermal and electrical conductivity, which make them suitable for a wide range of applications in areas from electronics (transistors, energy production and storage) to biotechnology (imaging, sensors, actuators and drug delivery) and other applications (displays, photonics, composites and multi-functional coatings/films). Controlled growth, assembly and integration of CNTs is essential for the practical realization of current and future nanotube applications. This review focuses on progress to date in the field of CNT assembly and integration for various applications. CNT synthesis based on arc-discharge, laser ablation and chemical vapor deposition (CVD) including details of tip-growth and base-growth models are first introduced. Advances in CNT structural control (chirality, diameter and junctions) using methods such as catalyst conditioning, cloning, seed-, and template-based growth are then explored in detail, followed by post-growth CNT purification techniques using selective surface chemistry, gel chromatography and density gradient centrifugation. Various assembly and integration techniques for multiple CNTs based on catalyst patterning, forest growth and composites are considered along with their alignment/placement onto different substrates using photolithography, transfer printing and different solution-based techniques such as inkjet printing, dielectrophoresis (DEP) and spin coating. Finally, some of the challenges in current and emerging applications of CNTs in fields such as energy storage, transistors, tissue engineering, drug delivery, electronic cryptographic keys and sensors are considered.

Constructing a three-dimensional graphene structure via bonding layers by ion beam irradiation

In recent years, the use of the multilayer graphene sheets has been considered more than the single-layer due to the cost-effectiveness and the possibility of mass production. But this type of graphene has some kind of structural weakness due to the weak physical link between its layers. Then, in order to strengthen, many structural modifications are proposed by various techniques to manage the mechanisms at interlayer distances. In this study, the focused ion beam irradiation method has been examined to cross-link and strengthen multi-layer graphene sheets with the help of the molecular dynamics simulation technique. Then, uniaxial and transverse tensile tests were performed to check the mechanical properties of obtained cross-linked multilayer graphene sheets. The results of this research can be considered for the creation of a new class of graphene structures. Such structures could be implemented as a membrane in water desalination or as a storage foam in hydrogen or carbon dioxide storage.

Covalent Atomic Bridges Enable Unidirectional Enhancement of Electronic Transport in Aligned Carbon Nanotubes

Interconnecting the surfaces of nanomaterials without compromising their outstanding mechanical, thermal, and electronic properties is critical in the design of advanced bulk structures that still preserve the novel properties of their nanoscale constituents. As such, bridging the π-conjugated carbon surfaces of single-walled carbon nanotubes (SWNTs) has special implications in next-generation electronics. This study presents a rational path toward the improvement of the electrical transport in aligned semiconducting SWNT films by deposition of metal atoms. The formation of conducting Cr-mediated pathways between the parallel SWNTs increases the transverse (intertube) conductance while having a negligible effect on the parallel (intratube) transport. In contrast, doping with Li has a predominant effect on the intratube electrical transport of aligned SWNT films. Large-scale first-principles calculations of electrical transport on aligned SWNTs show good agreement with the experimental electrical measurements and provide insight into the changes that different metal atoms exert on the density of states near the Fermi level of the SWNTs and the formation of transport channels.

Locally Controlled Growth of Individual Lambda-Shaped Carbon Nanofibers

The locally defined growth of carbon nanofibers with lambda shape in an open flame process is demonstrated. Via the growth time, the geometry of the structures can be tailored to a Λ- or λ-type shape. Microchannel cantilever spotting and dip-pen nanolithography are utilized for the deposition of catalytic salt NiCl₂ · 6H₂ O for locally controlled growth of lambda-shaped carbon nanofibers. Rigorous downscaling reveals a critical catalytic salt volume of 0.033 µm³, resulting in exactly one lambda-shaped carbon nanofiber at a highly predefined position. An empirical model explains the observed growth process.

Large tunability in the mechanical and thermal properties of carbon nanotube-fullerene hierarchical monoliths

Carbon based materials have attracted much attention as building blocks in technologically relevant nanocomposites due to their unique chemical and physical properties. Here, we propose a new class of hierarchical carbon based nano-truss structures consisting of fullerene joints attached with carbon nanotubes as the truss forming a three-dimensional network. Atomistic molecular dynamics simulations allow us to systematically demonstrate the ability to simultaneously control the mechanical and thermal properties of these structures, elucidating their unique physical properties. Specifically, we perform uniaxial tensile and compressive loading to show that by controlling the length of the carbon nanotube trusses, the mechanical properties can be tuned over a large range. Furthermore, we utilize the Green-Kubo method under the equilibrium molecular dynamics simulations framework to show that the thermal conductivities of these structures can be manipulated by varying the densities of the overall structures. This work provides a computational framework guiding future research on the manipulation of the fundamental physical properties in these organic-based hierarchical structures composed of carbon nanotubes and fullerenes as building blocks.

Effect of crosslink torsional stiffness on elastic behavior of semiflexible polymer networks

Networks of semiflexible filaments are building blocks of different biological and structural materials such as cytoskeleton and extracellular matrix. The mechanical response of these systems when subjected to an applied strain at zero temperature is often investigated numerically using networks composed of filaments, which are either rigidly welded or pinned together at their crosslinks. In the latter, filaments during deformation are free to rotate about their crosslinks while the relative angles between filaments remain constant in the former. The behavior of crosslinks in actual semiflexible networks is different than these idealized models and there exists only partial constraint on torques at crosslinks. The present work develops a numerical model in which two intersecting filaments are connected to each other by torsional springs with arbitrary stiffness. We show that fiber networks composed of rigid and freely rotating crosslinks are the limiting case of the present model. Furthermore, we characterize the effects of stiffness of crosslinks on effective Young's modulus of semiflexible networks as a function of filament flexibility and crosslink density. The effective Young's modulus is determined as a function of the mechanical properties of crosslinks and is found to vanish for networks composed of very weak torsional springs. Independent of the stiffness of crosslinks, it is found that the effective Young's modulus is a function of fiber flexibility and crosslink density. In low density networks, filaments primarily bend and the effective Young's modulus is much lower than the affine estimate. With increasing filament bending stiffness and/or crosslink density, the mechanical behavior of the networks becomes more affine and the stretching of filaments depicts itself as the dominant mode of deformation. The torsional stiffness of the crosslinks significantly affects the effective Young's modulus of the semiflexible random fiber networks.

Epitaxial Welding of Carbon Nanotube Networks for Aqueous Battery Current Collectors

Carbon nanomaterials are desirable candidates for lightweight, highly conductive, and corrosion-resistant current collectors. However, a key obstacle is their weak interconnection between adjacent nanostructures, which renders orders of magnitude lower electrical conductivity and mechanical strength in the bulk assemblies. Here we report an "epitaxial welding" strategy to engineer carbon nanotubes (CNTs) into highly crystalline and interconnected structures. Solution-based polyacrylonitrile was conformally coated on CNTs as "nanoglue" to physically join CNTs into a network, followed by a rapid high-temperature annealing (>2800 K, overall ∼30 min) to graphitize the polymer coating into crystalline layers that also bridge the adjacent CNTs to form an interconnected structure. The contact-welded CNTs (W-CNTs) exhibit both a high conductivity (∼1500 S/cm) and a high tensile strength (∼120 MPa), which are 5 and 20 times higher than the unwelded CNTs, respectively. In addition, the W-CNTs display chemical and electrochemical stabilities in strong acidic/alkaline electrolytes (>6 mol/L) when potentiostatically stressing at both cathodic and anodic potentials. With these exceptional properties, the W-CNT films are optimal as high-performance current collectors and were demonstrated in the state-of-the-art aqueous battery using a "water-in-salt" electrolyte.

In situ generation of 3D graphene-like networks from cellulose nanofibres in sintered ceramics

Establishing a 3D electrically percolating network in an insulating matrix is key to numerous engineering and functional applications. To this end, using hydrophobic carbon nanofillers is tempting, but still results in suboptimal performance due to processing challenges. Here, we demonstrate how natural cellulose nanofibres can be in situ transformed into graphene-like sheets connected to a 3D network enhancing both the transport and the mechanical properties of sintered engineering ceramics. The network architecture also permits the decoupling of electrical and thermal conductivities, which represents a major obstacle in attaining efficient thermoelectric materials. We foresee that our transferable methodology can pave the way for the use of natural nanofibres to unravel the full potential of 3D graphene-like networks to accelerate development in fields like energy and telecommunications.

Designing Hysteresis with Dipolar Chains

Materials that have hysteretic response to an external field are essential in modern information storage and processing technologies. A myriad of magnetization curves of several natural and artificial materials have previously been measured and each has found a particular mechanism that accounts for it. However, a phenomenological model that captures all the hysteresis loops and at the same time provides a simple way to design the magnetic response of a material while remaining minimal is missing. Here, we propose and experimentally demonstrate an elementary method to engineer hysteresis loops in metamaterials built out of dipolar chains. We show that by tuning the interactions of the system and its geometry we can shape the hysteresis loop which allows for the design of the softness of a magnetic material at will. Additionally, this mechanism allows for the control of the number of loops aimed to realize multiple-valued logic technologies. Our findings pave the way for the rational design of hysteretical responses in a variety of physical systems such as dipolar cold atoms, ferroelectrics, or artificial magnetic lattices, among others.

Two Sprayer CVD Synthesis of Nitrogen-doped Carbon Sponge-type Nanomaterials

Nitrogen-doped carbon sponge-type nanostructures (N-CSTNs) containing coaxial multiwalled carbon nanotubes are synthesized at 1020 °C by using a modified chemical vapor deposition (CVD) arrangement. Here, the CVD reactor is supplied by two flows coming from two independent sprayers (called sprayer A and sprayer B). The nebulized material in each sprayer is transported by two different gases with different flow velocities. The synthesis of carbon N-CSTNs is performed using different precursors: sprayer A contains a solution composed of ethanol, thiophene and ferrocene, whereas sprayer B contains a solution of benzylamine, thiophene and ferrocene. Samples are classified according to the position inside the reactor and characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and thermogravimetric analysis (TGA). Samples collected at the beginning of the reactor contain curly structures with diameters of 10–100 nm. At the end of the reactor, the sample is mainly formed by one type of structure. A spongy-type material is mainly formed in the hottest zone of the tubular furnace. The N-CSTNs are highly hydrophobic with oil sorption properties, which could be used for adsorption of oil spills.

Developing nanotube junctions with arbitrary specifications

Experimentally synthesized carbon nanotube (CNTs) junctions (either single or with 2D/3D CNT network topology) are expected to have random orientation of defect sites (non-hexagonal rings) around the junction. This random and irregular nature of the junction topology and defect characteristics is expected to affect their strength and durability as well as impact the associated mesoscopic and macroscopic properties. On the contrary, theoretical and computational studies often investigate structure-property relationships of pristine and regular junctions of carbon nanostructures. In this study, we developed a computational framework to model a variety of junction structures between CNTs with arbitrary spatial (orientation and degree of overlap) and intrinsic (chirality) specifications. The developed computational model also has the ability to tune the degree of topological defects around the junction via a variety of defect annihilation approaches. Our method makes use of the primal/dual meshing concept, where the development and manipulation of the junction nodes occur using triangular meshes (primal mesh), which is eventually converted to its dual mesh (honeycomb mesh) to render a fully covalently bonded CNT junction. Here each carbon atom has 3 bonded neighbors (mimicking sp² hybridization). Under a given set of CNT orientation, overlap and chirality specifications, the approach creates a number of CNT junction configurations with varying degrees of energetic stability, offering an opportunity to investigate the effect of topological arrangement of defects around the junction on mechanical, electrical and thermal properties. In addition, it is shown via few examples that the discussed methodology can easily be extended to create multi-junction nanotube clusters, multi-wall nanotube junctions, as well as true 3D random network structures.

Ultrafast structural evolution and formation of linear carbon chains in single-walled carbon nanotube networks by femtosecond laser irradiation

Inter-allotropic structural transformation of sp² structured nanocarbon is a topic of fundamental and technological interest in scalable nanomanufacturing. Such modifications usually require extremely high temperature or high-energy irradiation, and are usually a destructive and time-consuming process. Here, we demonstrate a method for engineering a molecular structure of single-walled carbon nanotubes (SWNTs) and their network properties by femtosecond laser irradiation. This method allows effective coalescence between SWNTs, transforming them into other allotropic nanocarbon structures (double-walled, triple-walled and multi-walled nanotubes) with the formation of linear carbon chains. The nanocarbon network created by this laser-induced transformation process shows extraordinarily strong coalescence induced mode in Raman spectra and two-times enhanced electrical conductivity. This work suggests a powerful method for engineering sp² carbon allotropes and their junctions, which provides possibilities for next generation materials with structural hybridization at the atomic scale.

Lightweight Hexagonal Boron Nitride Foam for CO2 Absorption

Weak van der Waals forces between inert hexagonal boron nitride (h-BN) nanosheets make it easy for them to slide over each other, resulting in an unstable structure in macroscopic dimensions. Creating interconnections between these inert nanosheets can remarkably enhance their mechanical properties. However, controlled design of such interconnections remains a fundamental problem for many applications of h-BN foams. In this work, a scalable in situ freeze-drying synthesis of low-density, lightweight 3D macroscopic structures made of h-BN nanosheets chemically connected by poly(vinyl alcohol) (PVA) molecules via chemical cross-link is demonstrated. Unlike pristine h-BN foam which disintegrates upon handling after freeze-drying, h-BN/PVA foams exhibit stable mechanical integrity in addition to high porosity and large surface area. Fully atomistic simulations are used to understand the interactions between h-BN nanosheets and PVA molecules. In addition, the h-BN/PVA foam is investigated as a possible CO₂ absorption and as laser irradiation protection material.

In Situ Electron Driven Carbon Nanopillar-Fullerene Transformation through Cr Atom Mediation

The promise of sp² nanomaterials remains immense, and ways to strategically combine and manipulate these nanostructures will further enhance their potential as well as advance nanotechnology as a whole. The scale of these structures requires precision at the atomic scale. In this sense electron microscopes are attractive as they offer both atomic imaging and a means to structurally modify structures. Here we show how Cr atoms can be used as physical linkers to connect carbon nanotubes and fullerenes to graphene. Crucially, while under electron irradiation, the Cr atoms can drive transformations such as catalytic healing of a hole in graphene with simultaneous transformation of a single wall carbon nanotube into a fullerene. The atomic resolution of the electron microscopy along with density functional theory based total energy calculations provide insight into the dynamic transformations of Cr atom linkers. The work augments the potential of transmission electron microscopes as nanolaboratories.

Rotating-Electric-Field-Induced Carbon-Nanotube-Based Nanomotor in Water: A Molecular Dynamics Study

Using molecular dynamics simulations, it is shown that a carbon nanotube (CNT) suspended in water and subjected to a rotating electric field of proper magnitude and angular speed can be rotated with the aid of water dipole orientations. Based on this principle, a rotational nanomotor structure is designed and the system is simulated in water. Use of the fast responsiveness of electric-field-induced CNT orientation in water is employed and its operation at ultrahigh-speed (over 10¹¹ r.p.m.) is shown. To explain the basic mechanism, the behavior of the rotational actuation, originated from the water dipole orientation, is also analyzed . The proposed nanomotor is capable of rotating an attached load (such as CNT) at a precise angle as well as nanogear-based complex structures. The findings suggest a potential way of using the electric-field-induced CNT rotation in polarizable fluids as a novel tool to operate nanodevices and systems.

A controllable water signal transistor

We performed molecular dynamics simulations to study the regulating ability of water chains confined in a Y-shaped nanochannel. It was shown that a signal at the molecular level could be controlled by two other charge-induced signals when the water chains were confined in a Y-shaped nanochannel, demonstrating promising applications as water signal transistors in nanosignal systems. The mechanism of a water signal transistor is similar to a signal logic device. This remarkable ability to control the water signal is attributed to the strong dipole-ordering of the water chains in the nanochannel. The controllable water signal process of the Y-shaped nanochannel provides opportunities for future application in the design of molecular-scale signal devices.

Simulation of carbon nanotube welding through Ar bombardment

Single-walled carbon nanotubes show promise as nanoscale transistors for nanocomputing applications. This use will require appropriate methods for creating electrical connections between distinct nanotubes, analogous to welding of metallic wires at larger length scales, but methods for performing nanoscale chemical welding are not yet sufficiently understood. This study examines the effect of Ar bombardment on the junction of two crossed single-walled carbon nanotubes, to understand the value and limitations of this method for generating connections between nanotubes. A geometric criterion was used to assess the quality of the junctions formed, with the goal of identifying the most productive conditions for experimental ion bombardment. In particular, the effects of nanotube chirality, Ar impact kinetic energy, impact particle flux and fluence, and annealing temperature were considered. The most productive bombardment conditions, leading to the most crosslinking of the tubes with the smallest loss of graphitic (i.e., conductive) character, were found to be at relatively mild impact energies (100 eV), with low flux and high-temperature (3000 K) annealing. Particularly noteworthy for experimental application, a high junction quality is maintained for a relatively broad range of fluences, from 3 × 10¹⁹ m^-2 to at least 1 × 10²⁰ m^-2.

Considerable knock-on displacement of metal atoms under a low energy electron beam

Under electron beam irradiation, knock-on atomic displacement is commonly thought to occur only when the incident electron energy is above the incident-energy threshold of the material in question. However, we report that when exposed to intense electrons at room temperature at a low incident energy of 30 keV, which is far below the theoretically predicted incident-energy threshold of zirconium, Zircaloy-4 (Zr-1.50Sn-0.25Fe-0.15Cr (wt.%)) surfaces can undergo considerable displacement damage. We demonstrate that electron beam irradiation of the bulk Zircaloy-4 surface resulted in a striking radiation effect that nanoscale precipitates within the surface layer gradually emerged and became clearly visible with increasing the irradiation time. Our transmission electron microscope (TEM) observations further reveal that electron beam irradiation of the thin-film Zircaly-4 surface caused the sputtering of surface α-Zr atoms, the nanoscale atomic restructuring in the α-Zr matrix, and the amorphization of precipitates. These results are the first direct evidences suggesting that displacement of metal atoms can be induced by a low incident electron energy below threshold. The presented way to irradiate may be extended to other materials aiming at producing appealing properties for applications in fields of nanotechnology, surface technology, and others.

Inter-allotropic transformations in the heterogeneous carbon nanotube networks

The allotropic transformations of carbon provide an immense technological interest for tailoring the desired molecular structures in the scalable nanoelectronic devices. Herein, we explore the effects of morphology and geometric alignment of the nanotubes for the re-engineering of carbon bonds in the heterogeneous carbon nanotube (CNT) networks. By applying alternating voltage pulses and electrical forces, the single-walled CNTs in networks were predominantly transformed into other predetermined sp² carbon structures (multi-walled CNTs and multi-layered graphitic nanoribbons), showing a larger intensity in a coalescence-induced mode of Raman spectra with the increasing channel width. Moreover, the transformed networks have a newly discovered sp²-sp³ hybrid nanostructures in accordance with the alignment. The sp³ carbon structures at the small channel are controlled, such that they contain up to about 29.4% networks. This study provides a controllable method for specific types of inter-allotropic transformations/hybridizations, which opens up the further possibility for the engineering of nanocarbon allotropes in the robust large-scale network-based devices.

Direct Preparation of Carbon Nanotube Intramolecular Junctions on Structured Substrates

Leveraging the unique properties of single-walled carbon nanotube (SWNT) intramolecular junctions (IMJs) in innovative nanodevices and next-generation nanoelectronics requires controllable, repeatable, and large-scale preparation, together with rapid identification and comprehensive characterization of such structures. Here we demonstrate SWNT IMJs through directly growing ultralong SWNTs on trenched substrates. It is found that the trench configurations introduce axial strain in partially suspended nanotubes, and promote bending deformation in the vicinity of the trench edges. As a result, the lattice and electronic structure of the nanotubes can be locally modified, to form IMJs in the deformation regions. The trench patterns also enable pre-defining the formation locations of SWNT IMJs, facilitating the rapid identification. Elaborate Raman characterization has verified the formation of SWNT IMJs and identified their types. Rectifying behavior has been observed by electrical measurements on the as-prepared semiconducting-semiconducting (S-S) junction.

Ultrasonic processing of SbSI nanowires for their application to gas sensors

Ultrasonic processing has been applied to create durable electrical contacts between antimony sulfoiodide (SbSI) nanowires and Au microelectrodes on glass substrate. After DC electric field alignment of SbSI nanowires between the microelectrodes, the sample was irradiated with ultrasound using chromium copper alloy sonotrode ended with silicon carbide (SiC) single crystal. The SEM and AFM investigations have showed that the ends of SbSI nanowires have been well compacted and bonded with microelectrodes. Ultrasonic processing has caused 420% increase of DC electric conductance of the junctions between Au microelectrodes and SbSI nanowires. The fabricated structures of SbSI nanowires bonded to Au microelectrodes are useful e.g. as nitrous oxide (N2O) gas sensors. These low power devices can operate at room temperature and do not require heating system for recovery.

In situ nanojoining of Y- and T-shaped silver nanowires structures using femtosecond laser radiation

We report the in situ joining of spatially separated silver nanowires without additional filler material by controlled irradiation with femtosecond laser pulses. Nanojoining under these conditions arises from highly localized heat generation in the vicinity of the gap between adjacent silver nanowires. Melting, followed by the flow of silver into the gap, is optimized by adjusting the direction of laser polarization relative to gap geometry. Our results show that melting of silver occurs on both nanowires in the vicinity of the gap between the two components. Successful formation of a joint is found to be a function of the angle between the long axis of the nanowires and the gap distance. Finite element simulations show that the strong localized electric field generated by optical excitation determines the location and the morphology of the resulting bond. Light coupling and the resulting emission properties of these Y-shaped nanowire structures have been simulated and are compared to similar structures where the gap remains open. It is suggested that joined Y-shaped couplers will have a higher switching ratio between emitted nanowire ends than those occurring in open-gap structures. Nanojoining induced by localized heating under strong field excitation may enable the production of robust branched metal nanowire structures for optical applications.