Microwave Processing: Current Background and Effects on the Physicochemical and Microbiological Aspects of Dairy Products

Effect of the Application of Ultrasound to Homogenize Milk and the Subsequent Pasteurization by Pulsed Electric Field, High Hydrostatic Pressure, and Microwaves

The efficacy of applying ultrasound (US) as a system to homogenize emulsions has been widely demonstrated. However, research has not yet shown whether the effect achieved by homogenizing milk with US is modified by subsequent pasteurization treatments that use new processing technologies such as pulsed electric fields (PEF), microwaves (MW), and high hydrostatic pressure (HPP). The aim of this study was, therefore, to optimize the application of US for milk homogenization and to evaluate the effect of PEF, HPP, and MW pasteurization treatments on the sensorial, rheological, and microbiological properties of milk throughout its shelf life. To homogenize whole milk, a continuous US system (20 kHz, 0.204 kJ/mL, 100%, 40 °C) was used, and different ultrasonic intensities (0.25, 0.5, and 1.0 kJ/mL) were evaluated. The optimal ultrasonic treatment was selected on the basis of fat globule size distribution and pasteurization treatments by MW (5800 W, 1.8 L/min), PEF (120 kJ/kg, 20 kV/cm) and HPP (600 MPa, 2 min, 10 °C) was applied. The ultrasound intensity that achieved the highest reduction in fat globule size (0.22 ± 0.02 µm) and the most homogeneous distribution was 1.0 kJ/mL. Fat globule size was smaller than in commercial milk (82% of volume < 0.5 µm for US milk versus 97% of volume < 1.2 µm for commercial milk). That size was maintained after the application of the different pasteurization treatments, and the resulting milk had better emulsion stability than commercial milk. After 28 days of storage, no differences in viscosity (4.4–4.9 mPa s) were observed. HPP pasteurization had the greatest impact on color, leading to higher yellowness values than commercial milk. Microbial counts did not vary significantly after 28 days of storage, with counts below 102 CFU/mL for samples incubated at 15 °C and at 37 °C. In summary, the homogenization of milk obtained by US was not affected by subsequent pasteurization processes, regardless of the technology applied (MW, PEF, or HPP). Further research is needed to evaluate these procedures’ effect on milk’s nutritional and functional properties.

Device Testing: High-Efficiency and High-Uniformity Microwave Water Treatment System Based on Horn Antennas

Microwave heating has excellent potential for applications in wastewater treatment. This study proposes a highly efficient continuous liquid-phase microwave heating system to overcome the problems of low treatment capacity, low dynamic range of loads, and insufficient heating uniformity of the existing equipment. First, a quarter-wavelength impedance-matching layer improves heating efficiency, and the heating uniformity has been enhanced by horn antennas. Second, an experimental system is developed. The simulation and experimental results are consistent, with the microwave system achieving over 90% energy utilization for different thicknesses and concentrations of salt water. Finally, simulations are performed to analyze microwave efficiency and heating uniformity at different flow rates, salinities, dielectric properties, and sawtooth structures. The system can efficiently heat loads with a wide range of dielectric properties, including saline water. Generally, when the permittivity varies from 10 to 80, and the loss tangent varies dynamically from 0.15 to 0.6, more than 90% of microwave efficiency and excellent temperature distribution (The coefficient of temperature variation COV < 0.5) can be achieved. The system’s modular design enables scaling up to further boost processing capacity. Overall, the system provides high-throughput, high-efficiency, high-uniformity, and large-dynamic-range microwave water treatment, which has promising applications in industrial water treatment.

Research advances of advanced glycation end products in milk and dairy products: Formation, determination, control strategy and immunometabolism via gut microbiota

Advanced glycosylation end products (AGEs) are a series of complex compounds which generate in the advanced phase of Maillard reaction, which can pose a non-negligible risk to human health. This article systematically encompasses AGEs in milk and dairy products under different processing conditions, influencing factors, inhibition mechanism and levels among the different categories of dairy products. In particular, it describes the effects of various sterilization techniques on the Maillard reaction. Different processing techniques have a significant effect on AGEs content. In addition, it clearly articulates the determination methods of AGEs and even discusses its immunometabolism via gut microbiota. It is observed that the metabolism of AGEs can affect the composition of the gut microbiota, which further has an impact on intestinal function and the gut-brain axis. This research also provides a suggestion for AGEs mitigation strategies, which are beneficial to optimize the dairy production, especially innovative processing technology application.

A Review and Perspective of Environmental Disinfection Technology Based on Microwave Irradiation

PURPOSE OF REVIEW

In the context of COVID-19 sweeping the world, the development of microbial disinfection methods in gas, liquid, and solid media has received widespread attention from researchers. As a disinfection technology that can adapt to different environmental media, microwave-assisted disinfection has the advantages of strong permeability, no secondary pollution, etc. The purpose of this review is to put forward new development requirements for future microwave disinfection strategies by summarizing current microwave disinfection methods and effects. From the perspective of the interaction mechanism of microwave and microorganisms, this review provides a development direction for more accurate and microscopic disinfection mechanism research.

RECENT FINDINGS

Compared to other traditional environmental disinfection techniques, microwave-assisted disinfection means have the advantages of being more destructive, free of secondary contamination, and thorough. Currently, researchers generally agree that the efficiency of microwave disinfection is the result of a combination of thermal and non-thermal effects. However, the performance of microwave disinfection shows the differences in the face of different environmental media as well as different types of microorganisms.

SUMMARY

This review highlights the inactivation mechanism of microwave-assisted disinfection techniques used in different scenarios. Suggestions for promoting the efficiency and overcoming the limitations of low energy utilization, complex reactor design, and inaccurate monitoring methods are proposed.

Continuous flow microwave heating and sterilization for liquid food

Continuous flow microwave sterilization for liquid food has advantages of a short time and high retention rate of nutrients. However, uneven microwave heating is the critical factor restricting the industrialization of microwave sterilization. This paper reviews the up-to-date research on the continuous flow microwave heating and the continuous flow microwave sterilization system for liquid food. The causes of the non-uniformity of continuous flow microwave heating are thoroughly discussed and the methods of improving the uniformity are proposed. Finally, the recommendations for future research of continuous flow microwave sterilization for liquid food are presented.

Citrus juice off-flavor during different processing and storage: Review of odorants, formation pathways, and analytical techniques

As the most widespread juice produced and consumed globally, citrus juice (mandarin juice, orange juice, and grapefruit juice) is appreciated for its attractive and distinct aroma. While the decrease of characteristic aroma-active compounds and the formation of off-flavor compounds are easy to occur in processing and storage conditions. This review provides a comprehensive literature of recent research and discovery on citrus juice off-flavor, primarily focusing on off-flavor compounds induced during processing and storage (i.e., thermal, storage, light, oxygen, package, fruit maturity, diseases, centrifugal pretreatment, and debittering process), formation pathways (i.e., terpene acid-catalyzed hydration, caramelization reaction, Maillard reaction, Strecker degradation, and other oxidative degradation) of the off-flavor compounds, effective inhibitor pathway to off-flavor (i.e., electrical treatments, high pressure processing, microwave processing, ultrasound processing, and chemical treatment), as well as odor assessment techniques based on molecular sensory science. The possible precursors (terpenes, sulfur-containing amino acids, carbohydrates, carotenoids, vitamins, and phenolic acids) of citrus juice off-flavor are listed and are also proposed. This review intends to unravel the regularities of aroma variations and even off-flavor formation of citrus juice during processing and storage. Future aroma analysis techniques will evolve toward a colorimetric sensor array for odor visualization to obtain a "marker" of off-flavor in citrus juice.

The influence of the microwave oven on the production of solid culture medium and quality of microbial growth

Numerous cultivation media currently exist, whether selective, non-selective, enrichment or identification. However, they all have a common goal, which is the growth of microorganisms; the constitution and quality of the culture medium must favor it. For this reason, an important factor that directly affects the quality of a culture medium is its production. Thus, this article investigated the use of a microwave oven in the production of Sabouraud dextrose agar (SDA), and the microbial inactivation compared to the autoclave in a microbiology laboratory. The quality of the medium, time exposure, and sterilization potential were performed using fungal strains of Candida spp., Cryptococcus spp., Microsporum spp., and Aspergillus spp. The results showed that the advantages of the use of a microwave oven for the preparation of SDA are practicality, speed, lower energy expense, pH, and constituents preservation of the culture medium, resulting in a richer growth compared to autoclaved SDA. The multivariate analysis of digital images allowed the detection of melanoidins (brownish tone of medium), which are responsible for the negative influence on the microorganisms growth. This research shows the use of the microwave oven as an efficient alternative for the production of the culture medium and maintaining their best quality.

Conventional and Novel Technologies in the Production of Dairy Bioactive Peptides

Background

In recent years, researchers have focused on functional ingredients, functional foods, and nutraceuticals due to the rapidly increasing interest in bioactive components, especially in bioactive peptides. Dairy proteins are a rich and balanced source of amino acids and their derived bioactive peptides, which possess biological and physiological properties. In the dairy industry, microbial fermentation and enzymatic hydrolysis are promising methods for producing bioactive peptides because of their rapid efficiency, and mild reaction conditions. However, these methods utilize less raw material, take long reaction time, result in low yields, and low activity products when used alone, which pose industry to seek for novel methods as pretreatments to increase the yield of bioactive peptides.

Scope and Approach

This review emphasizes the production of peptides from the dairy proteins and discusses the potential use of novel technologies as pretreatments to conventional methods of bioactive peptides production from dairy proteins, including the mechanisms of novel technologies along with respective examples of use, advantages, limitations, and challenges to each technology.

Key Findings and Conclusion

Noteworthily, hydrolysis of dairy proteins liberate wide-range of peptides that possess remarkable biological functions to maintain human health. Novel technologies in the dairy industry such as ultrasound-assisted processing (UAP), microwave-assisted processing (MAP), and high pressure processing (HPP) are innovative and environmentally friendly. Generally, novel technologies are less effectual compared to conventional methods, therefore used in combination with fermentation and enzymatic hydrolysis, and are promising pretreatments to modify peptides’ profile, improve the yields, and high liberation of bioactive peptides as compared to conventional technologies. UAP is an innovative and most efficient technology as its mechanical effects and cavitation change the protein conformation, increase the biological activities of enzymes, and enhance enzymatic hydrolysis reaction rate.

The future of functional food: Emerging technologies application on prebiotics, probiotics and postbiotics

This review was the first to gather literature about the effect of emerging technologies on probiotic, prebiotic, and postbiotic products. Applying emerging technologies to probiotic products can increase probiotic survival and improve probiotic properties (cholesterol attachment, adhesion to Caco-2 cells, increase angiotensin-converting enzyme (ACE) inhibitory, antioxidant, and antimicrobial activities, and decrease systolic blood pressure). Furthermore, it can optimize the fermentation process, produce or maintain compounds of interest (bacteriocin, oligosaccharides, peptides, phenolic compounds, flavonoids), improve bioactivity (vitamin, aglycones, calcium), and sensory characteristics. Applying emerging technologies to prebiotic products did not result in prebiotic degradation. Still, it contributed to higher concentrations of bioactive compounds (citric and ascorbic acids, anthocyanin, polyphenols, flavonoids) and health properties (antioxidant activity and inhibition of ACE, α-amylase, and α-glucosidase). Emerging technologies may also be applied to obtain postbiotics with increased health effects. In this way, current studies suggest that emerging food processing technologies enhance the efficiency of probiotics and prebiotics in food. The information provided may help food industries to choose a more suitable technology to process their products and provide a basis for the most used process parameters. Furthermore, the current gaps are discussed. Emerging technologies may be used to process food products resulting in increased probiotic functionality, prebiotic stability, and higher concentrations of bioactive compounds. In addition, they can be used to obtain postbiotic products with improved health effects compared to the conventional heat treatment.

Advances in Microwave Synthesis of Nanoporous Materials

Usually, porous materials are synthesized by using conventional electric heating, which can be energy- and time-consuming. Microwave heating is commonly used in many households to quickly heat food. Microwave ovens can also be used as powerful devices in the synthesis of various porous materials. The microwave-assisted synthesis offers a simple, fast, efficient, and economic way to obtain many of the advanced nanomaterials. This review summarizes the recent achievements in the microwave-assisted synthesis of diverse groups of nanoporous materials including silicas, carbons, metal-organic frameworks, and metal oxides. Microwave-assisted methods afford highly porous materials with high specific surface areas (SSAs), e.g., activated carbons with SSA ≈3100 m² g^-1 , metal-organic frameworks with SSA ≈4200 m² g^-1 , covalent organic frameworks with SSA ≈2900 m² g^-1 , and metal oxides with relatively small SSA ≈300 m² g^-1 . These methods are also successfully implemented for the preparation of ordered mesoporous silicas and carbons as well as spherically shaped nanomaterials. Most of the nanoporous materials obtained under microwave irradiation show potential applications in gas adsorption, water treatment, catalysis, energy storage, and drug delivery, among others.

Bio Discarded from Waste to Resource

The modern linear agricultural production system allows the production of large quantities of food for an ever-growing population. However, it leads to large quantities of agricultural waste either being disposed of or treated for the purpose of reintroduction into the production chain with a new use. Various approaches in food waste management were explored to achieve social benefits and applications. The extraction of natural bioactive molecules (such as fibers and antioxidants) through innovative technologies represents a means of obtaining value-added products and an excellent measure to reduce the environmental impact. Cosmetic, pharmaceutical, and nutraceutical industries can use natural bioactive molecules as supplements and the food industry as feed and food additives. The bioactivities of phytochemicals contained in biowaste, their potential economic impact, and analytical procedures that allow their recovery are summarized in this study. Our results showed that although the recovery of bioactive molecules represents a sustainable means of achieving both waste reduction and resource utilization, further research is needed to optimize the valuable process for industrial-scale recovery.

Invited review: Stress resistance of Cronobacter spp. affecting control of its growth during food production

Members of the Cronobacter genus include food-borne pathogens that can cause infections in infants, with a mortality rate as high as 40 to 80%. The high fatality rate of Cronobacter and its isolation from numerous types of food, especially from powdered infant formula, demonstrate the serious nature of this organism. The source tracking of Cronobacter spp. and the analysis of high-frequency species from different sources are helpful for a more targeted control. Furthermore, the persistence during food processing and storage may be attributed to strong resistance of Cronobacter spp. to environment stresses such as heat, pH, and desiccation. There are many factors that support the survival of Cronobacter spp. in harsh environments, such as some genes, regulatory systems, and biofilms. Advanced detection technology is helpful for the strict monitoring of Cronobacter spp. In addition to the traditional heat treatment, many new control techniques have been developed, and the ability to control Cronobacter spp. has been demonstrated. The control of this bacteria is required not only during manufacture, but also through the selection of packaging methods to reduce postprocessing contamination. At the same time, the effect of inactivation methods on product quality and safety must be considered. This review considers the advances in our understanding of environmental stress response in Cronobacter spp. with special emphasis on its implications in food processing.

Extraction of protein from food waste: An overview of current status and opportunities

The chief intent of this review is to explain the different extraction techniques and efficiencies for the recovery of protein from food waste (FW) sources. Although FW is not a new concept, increasing concerns about chronic hunger, nutritional deficiency, food security, and sustainability have intensified attention on alternative and sustainable sources of protein for food and feed. Initiatives to extract and utilize protein from FW on a commercial scale have been undertaken, mainly in the developed countries, but they remain largely underutilized and generally suited for low-quality products. The current analysis reveals the extraction of protein from FW is a many-sided (complex) issue, and that identifies for a stronger and extensive integration of diverse extraction perspectives, focusing on nutritional quality, yield, and functionality of the isolated protein as a valued recycled ingredient.

Effects of microwave heating on the chemical composition and bioactivity of orange juice-milk beverages

The effect of microwave heating (MH, 65 and 75 °C for 15, 30, and 60 s) on the bioactive compounds, fatty acid profile, and volatile compounds of orange juice-milk beverage (OJMB) was evaluated during 28 days of refrigerated (4 °C) storage. Conventionally pasteurized (75 °C/15 s) and untreated beverages were used as controls. MH-OJMB presented a lower browning index and higher levels of ascorbic acid, total phenolics, and carotenoids, higher antioxidant activity, and greater α-amylase, α-glucosidase, and ACE inhibitory activity than the pasteurized product, similar to the untreated beverage. No significant differences were observed in the volatile organic compounds and fatty acids levels. Lower temperatures (65 °C) and longer process times (60 s) resulted in higher retention of bioactive compounds. MH can be an alternative to conventional pasteurization for OJMB processing.

Phenolic Compounds in Mesoamerican Fruits-Characterization, Health Potential and Processing with Innovative Technologies

Diets rich in phenolic compounds have been associated to reducing the risk of metabolic syndrome and its derived disorders. Fruits are healthy components of the human diet because of their vitamin, mineral, fiber and phenolic profile. However, they have a short shelf-life which is limited by microbiological growth and enzymatic activity. Innovative preservation methods such as high hydrostatic pressure, pulsed electric fields, ultrasound, microwave, cold plasma and ultraviolet light have become popular for the processing of fruits because they can preserve nutritional quality. In this review, the phenolic profile and health potential of 38 Mesoamerican fruits were assessed. Phenolic compounds were classified based on their contribution to the diet as flavonoids, phenolic acids, tannin, lignins and stilbenoids. Due to this composition, fruits showed a wide range of bioactivities which included anti-inflammatory, anti-diabetic, anti-hypertensive and anti-obesity activities, among others. Phenolic content in fruits submitted to innovative food processing technologies depended on parameters such as enzymatic activity, antioxidant capacity, microstructure integrity and cell viability. Innovative technologies could increase phenolic content while assuring microbiological safety by (i) promoting the release of bound phenolic compounds during processing and (ii) inducing the synthesis of phenolic compounds by activation of phenylpropanoid pathway during storage.