Fluoride-containing nanoporous calcium-silicate MTA cements for endodontics and oral surgery: early fluorapatite formation in a phosphate-containing solution

Guttapercha Improves In Vitro Bioactivity and Dentin Remineralization Ability of a Bioglass Containing Polydimethylsiloxane-Based Root Canal Sealer

Guttapercha (GP, trans-1,4-polyisoprene) is the most used tooth root filling material, and it must be used with an appropriate cement (typically a polydimethylsiloxane (PDMS)-based sealer) to ensure an adequate canal obturation. This study aimed to assess the bioactivity and dentin remineralization ability of a bioglass containing PDMS commercial endodontic sealer, BG-PDMS (GuttaFlow Bioseal), and to evaluate the possible influence of a GP cone (Roeko GP point) on the mineralization process. To this end, BG-PDMS disks were aged alone or in the presence of a GP cone in Hank's Balanced Salt Solution (28 d, 37 °C). Dentin remineralization experiments were carried out under the same conditions. Micro-Raman and IR analyses demonstrated that BG-PDMS is bioactive, thanks to the formation of a silica-rich layer with nucleation sites for B-type carbonated apatite deposition. This phase was thicker when BG-PDMS was aged in the presence of GP. The two materials influenced each other because GP, which alone did not show any bioactivity, nucleated a calcium phosphate phase under these conditions. Analogously, dentin remineralization experiments showed that BG-PDMS is able to remineralize dentin, especially in the presence of GP. Under the experimental conditions, GP acted as a templating agent for calcium phosphate deposition.

The Use of Premixed Calcium Silicate Bioceramic Sealer with Warm Carrier-Based Technique: A 2-Year Study for Patients Treated in a Master Program

Background: Recently several calcium silicate flowable sealers have been introduced as endodontic materials for the root canal. This clinical study tested the use of a new premixed calcium silicate bioceramic sealer in association with the Thermafil warm carrier-based technique (TF). Epoxy-resin-based sealer with the warm carrier-based technique was the control group. Methodology: Healthy consecutive patients (n = 85) requiring 94 root canal treatments were enrolled in this study and assigned to one filling group (Ceraseal-TF n = 47, AH Plus-TF n = 47) in accordance with operator training and best clinical practice. Periapical X-rays were taken preoperatively, after root canal filling and after 6, 12 and 24 months. Two evaluators blindly assessed the periapical index (PAI) and sealer extrusion in the groups (k = 0.90). Healing rate and survival rate were also evaluated. Chi-square tests was used to analyze significant differences between the groups. Multilevel analysis was performed to evaluate the factors associated with healing status. Results: A total of 89 root canal treatments in 82 patients were analyzed at the end-line (24 months). The total drop-out was 3.6% (3 patients; 5 teeth). A total of 91.1% of healed teeth (PAI 1-2) was observed in Ceraseal-TF, with 88.6% in AH Plus-TF. No significant difference was observed on healing outcome and survival among the two filling groups (p > 0.05). Apical extrusion of the sealers occurred in 17 cases (19.0%). Of these, 6 occurred in Ceraseal-TF (13.3%) and 11 in AH Plus-TF (25.0%). Three Ceraseal extrusions were radiographically undetectable after 24 months. All the AH Plus extrusions did not change during the evaluation time. Conclusions: The combined use of the carrier-based technique and premixed CaSi-based bioceramic sealer showed clinical results comparable with carrier-based technique and epoxy-resin-based sealer. The radiographical disappearance of apically extruded Ceraseal is a possible event in the first 24 months.

The Influence of the Matrix on the Apatite-Forming Ability of Calcium Containing Polydimethylsiloxane-Based Cements for Endodontics

This study aimed to characterize the chemical properties and bioactivity of an endodontic sealer (GuttaFlow Bioseal) based on polydimethylsiloxane (PDMS) and containing a calcium bioglass as a doping agent. Commercial PDMS-based cement free from calcium bioglass (GuttaFlow 2 and RoekoSeal) were characterized for comparison as well as GuttaFlow 2 doped with dicalcium phosphate dihydrate, hydroxyapatite, or a tricalcium silicate-based cement. IR and Raman analyses were performed on fresh materials as well as after aging tests in Hank’s Balanced Salt Solution (28 d, 37 °C). Under these conditions, the strengthening of the 970 cm−1 Raman band and the appearance of the IR components at 1455−1414, 1015, 868, and 600−559 cm−1 revealed the deposition of B-type carbonated apatite. The Raman I970/I638 and IR A1010/A1258 ratios (markers of apatite-forming ability) showed that bioactivity decreased along with the series: GuttaFlow Bioseal > GuttaFlow 2 > RoekoSeal. The PDMS matrix played a relevant role in bioactivity; in GuttaFlow 2, the crosslinking degree was favorable for Ca2+ adsorption/complexation and the formation of a thin calcium phosphate layer. In the less crosslinked RoekoSeal, such processes did not occur. The doped cements showed bioactivity higher than GuttaFlow 2, suggesting that the particles of the mineralizing agents are spontaneously exposed on the cement surface, although the hydrophobicity of the PDMS matrix slowed down apatite deposition. Relevant properties in the endodontic practice (i.e., setting time, radiopacity, apatite-forming ability) were related to material composition and the crosslinking degree.

Cytotoxicity and Antibacterial Activity of Mineral Trioxide Aggregate Cement with Radiopacity Introduced by ZrO2

The article presents the results of in vitro studies on cytotoxicity and antibacterial activity of new MTA-type cements, developed on the basis of the sintered tricalcium silicate enriched with ZnO, along with an agent introducing the radiopacity in the form of ZrO₂. The new materials have been developed to ensure that their physical and chemical properties are suited for endodontic applications. The cements were evaluated via characterisation of setting time, compressive strength, as well as translucency on X-ray images, and bioactivity in the simulated body fluid (SBF). The μCT was used to test the influence of the ZrO₂ grains in the powder component on the microstructure of the produced cement. Then, the cytotoxic action of the cements was evaluated by applying a reference L-929 cell line. The conditions of the culture upon contact with the tested materials or with extracts from the cements were assessed using image analysis or an MTT colorimetric assay. Two strains of streptococci, Streptococcus mutans and Streptococcus sanguinis, were used to study the antibacterial activity of the tested cements with ZrO₂ acting as the agent introducing the radiopacity. The new cements are characterised by appropriate properties as far as retrograde root canal filling is concerned.

Periapical Healing following Root Canal Treatment Using Different Endodontic Sealers: A Systematic Review

The healing of the periapical tissues is crucial to the success of root canal treatment. The review studies effectively examine various endodontic root canal sealants in terms of periapical healing. This systematic review was formulated following the PRISMA 2020 guidelines and registered in the international prospective register of systematic reviews (PROSPERO) number-CRD42021239192. To find relevant articles, PubMed Central and Medline databases (until February 2022) were searched. Studies that evaluated healing following the application of different endodontic sealers were analysed. A primary outcome measure was the resolution of periapical lesions following the endodontic treatment. In vivo studies comparing radiographic treatment outcomes and articles with a minimum of 6-month follow-up were included. A total of 9 clinical trial studies that met all the inclusion criteria were included in the analysis. The overall risk of bias was high in four studies out of nine studies. Periapical lesions showed significant healing after endodontic treatment regardless of sealer type, although bioceramic and bioactive sealers had shown better results.

Comparative evaluation of diffused calcium and hydroxyl ion release from three different Indirect pulp capping agents in permanent teeth - An in vitro study

Background

Indirect pulp capping therapy has gained increased popularity in paediatric dentistry since it is less invasive, and is of low cost. The aim of the present study was to evaluate and to compare the diffusion of calcium (Ca2+) and hydroxyl (OH-) ions through coronal dentin into pulp after indirect pulp capping in vitro using TheraCal LC, ProRoot MTA and Calcimol LC.

Materials and methods

Total of 60 human caries-free maxillary first premolars were selected for the study. Samples were divided into 4 groups with 15 in each group: Group 1 TheraCal LC; Group 2 ProRoot MTA; Group 3 Calcimol LC; Group 4 Control Group. Indirect pulpcapping on the coronal RDT (remaining dentine thickness) system was performed using pulp-capping materials, such as TheraCal LC, ProRoot MTA and Calcimol LC, on the respective samples. The control group was completely filled with composite. Ca2+ ions (ppm) and OH- ions (pH) were analysed in deionized water using a multimeter connected to a calcium probe (calcium ion electrode) and pH metre connected to a temperature-compensated pH probe after 3 h, 24 h, 7 days, 14 days, 28 days and 60 days.

Results

Calcium release was significantly higher (P < 0.05) in the TheraCal LC group than in the other groups. Slightly alkaline pH values were observed in all the groups except for the control.

Conclusion

TheraCal is a new light-curable pulp capping material that initially releases high Ca2+ ions and creates an environmental pH close to physiological pH after 60 days.

Green Hydrogels Composed of Sodium Mannuronate/Guluronate, Gelatin and Biointeractive Calcium Silicates/Dicalcium Phosphate Dihydrate Designed for Oral Bone Defects Regeneration

Innovative green, eco-friendly, and biologically derived hydrogels for non-load bearing bone sites were conceived and produced. Natural polysaccharides (copolymers of sodium D-mannuronate and L-guluronate) with natural polypeptides (gelatin) and bioactive mineral fillers (calcium silicates CaSi and dicalcium phosphate dihydrate DCPD) were used to obtain eco-sustainable biomaterials for oral bone defects. Three PP-x:y formulations were prepared (PP-16:16, PP-33:22, and PP-31:31), where PP represents the polysaccharide/polypeptide matrix and x and y represent the weight % of CaSi and DCPD, respectively. Hydrogels were tested for their chemical-physical properties (calcium release and alkalizing activity in deionized water, porosity, solubility, water sorption, radiopacity), surface microchemistry and micromorphology, apatite nucleation in HBSS by ESEM-EDX, FT-Raman, and micro-Raman spectroscopies. The expression of vascular (CD31) and osteogenic (alkaline phosphatase ALP and osteocalcin OCN) markers by mesenchymal stem cells (MSCs) derived from human vascular walls, cultured in direct contact with hydrogels or with 10% of extracts was analysed. All mineral-filled hydrogels, in particular PP-31:31 and PP-33:22, released Calcium ions and alkalized the soaking water for three days. Calcium ion leakage was high at all the endpoints (3 h-28 d), while pH values were high at 3 h-3 d and then significantly decreased after seven days (p < 0.05). Porosity, solubility, and water sorption were higher for PP-31:31 (p < 0.05). The ESEM of fresh samples showed a compact structure with a few pores containing small mineral granules agglomerated in some areas (size 5-20 microns). PP-CTRL degraded after 1-2 weeks in HBSS. EDX spectroscopy revealed constitutional compounds and elements of the hydrogel (C, O, N, and S) and of the mineral powders (Ca, Si and P). After 28 days in HBSS, the mineral-filled hydrogels revealed a more porous structure, partially covered with a thicker mineral layer on PP-31:31. EDX analyses of the mineral coating showed Ca and P, and Raman revealed the presence of B-type carbonated apatite and calcite. MSCs cultured in contact with mineral-filled hydrogels revealed the expression of genes related to vascular (CD31) and osteogenic (mainly OCN) differentiation. Lower gene expression was found when cells were cultured with extracts added to the culture medium. The incorporation of biointeractive mineral powders in a green bio-derived algae-based matrix allowed to produce bioactive porous hydrogels able to release biologically relevant ions and create a suitable micro-environment for stem cells, resulting in interesting materials for bone regeneration and healing in oral bone defects.

Evaluation of pH, Calcium Ion Release, and Dimensional Stability of an Experimental Silver Nanoparticle-Incorporated Calcium Silicate-Based Cement

An experimental calcium silicate-based root-end filling material incorporated with silver nanoparticles intended for use in periapical surgeries was developed with the purpose to overcome the drawbacks of existing materials and to satisfy the ideal requirements of root-end filling materials. This study was designed to evaluate the physicochemical properties, pH, calcium ion release, and dimensional stability of the experimental cement, and compare the results with commercially available ProRoot MTA (Dentsply). An independent sample test was used to analyze the data. Mean initial pH (immediately after mixing) of the experimental cement was 10.42 ± 0.04 which was higher than that of MTA. However, there was a significant increase in pH of MTA at 1 day, 2 days, and 7 days. Presence of calcium chloride favored the release of calcium ions which was significantly increased in the experimental group at 24 hours. At the end of 30 days, MTA showed a significant expansion when compared to the experimental cement (p < 0.001). In conclusion, the experimental nanoparticle-incorporated calcium silicate-based cement showed clinically acceptable physicochemical properties.

Cell-Free Biomimetic Mineralization Strategies to Regenerate the Enamel Microstructure

The distinct architecture of native enamel gives it its exquisite appearance and excellent intrinsic-extrinsic fracture toughening properties. However, damage to the enamel is irreversible. At present, the clinical treatment for enamel lesion is an invasive method; besides, its limitations, caused by the chemical and physical difference between restorative materials and dental hard tissue, makes the restorative effects far from ideal. With more investigations on the mechanism of amelogenesis, biomimetic mineralization techniques for enamel regeneration have been well developed, which hold great promise as a non-invasive strategy for enamel restoration. This review disclosed the chemical and physical mechanism of amelogenesis; meanwhile, it overviewed and summarized studies involving the regeneration of enamel microstructure in cell-free biomineralization approaches, which could bring new prospects for resolving the challenges in enamel regeneration.

The biocompatibility and mineralization potential of mineral trioxide aggregate containing calcium fluoride-An in vitro study

BACKGROUND/PURPOSE

MTA is used to induce hard tissue regeneration in various procedures. This study evaluated the biocompatibility and mineralization potential of mineral trioxide aggregate (MTA) containing calcium fluoride (CaF2). To verify if the change of components affected physical properties, the setting time, solubility, and surface roughness were measured.

MATERIALS AND METHODS

Human dental pulp cells (HDPCs) were treated with powder and set MTA containing CaF2 (0, 1, 5, and 10 wt %). The proliferation of HDPCs was investigated using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The mineralization potential of HDPCs was investigated with the relative gene expression of alkaline phosphatase (ALP), collagen type I (ColI), osteocalcin (OCN), and runt-related transcription factor 2 (Runx2) using real-time reverse transcription polymerase chain reaction (RT-PCR). For investigating the physical properties, setting time and solubility were tested. Surface profiles of material were analyzed by a non-contact surface profiler and a scanning electron microscope (SEM).

RESULTS

MTA-5% CaF2 mixtures increased the proliferation and the mineralization-related gene expression of HDPCs to a greater degree than pure MTA. The addition of CaF2 to MTA delayed the setting, but the difference was only significant in the MTA-10% CaF2. Solubility and surface roughness was not altered.

CONCLUSION

The addition of more than 5% CaF2 can be considered to increase the regeneration potential of pulp cells without adverse effects on physical property.

Comparison of Rat Connective Tissue Response to BioMTA, Angelus MTA, and Root MTA

Due to the widespread use of MTA in dentistry and various brands of this product, we decided to compare the three brands available in the country market by their biocompatibility. We divided 20 male Wistar rats into four groups. After local anesthesia and washing, we made two incisions on both sides (4 incisions in total). The experimental groups were Angelus MTA (Angelus, Brazil), BioMTA (CERKAMED, Poland), Root MTA (Dr. Lotfi, Tabriz, Iran), and the control group. The resulting paste was placed in a tube and implanted subcutaneously into male Wistar rats. Wistar rats were sacrificed 7, 15, 30, and 60 days later, with high anesthetic doses. The sample implanted in 10% formalin was stabilized after tissue processing and H&E staining under a microscope. The inflammatory reaction in the tissues received different scores at the beginning of the tube opening. BioMTA had the highest inflammatory response among the groups, but the difference was not statistically significant (p > 0.05). Also, there was no significant difference between the groups' granulation and calcification (p < 0.05). There was a significant difference between BioMTA, Angelus MTA, Root MTA, and control groups in fibrous capsule formation (p < 0.05). Angelus MTA showed the lowest mean fibrous capsule formation in all periods. The effects of Angelus MTA, Root MTA, and BioMTA on connective tissue were investigated and compared. According to this study, these materials have good biocompatibility. According to the findings and statistical analysis, Angelus MTA has the most biocompatibility.

Osteogenic Potential of Fast Set Bioceramic Cements: Molecular and In Vitro Study

Recently, pre-mixed bioceramics in fast set formulations have been increasingly utilized in clinical practice as an alternative to mineral trioxide aggregate (MTA) for their shorter setting time and better handling properties. However, the impact on their osteogenic potential, due to modifications in chemical composition to promote a fast setting, is still unclear. This molecular and in vitro study compared the osteogenic potential of root repairing material putty fast set (FSP) with root-repairing material putty (RRMPU), root-repairing material paste (RRMPA), Biodentine™ and MTA. The null hypothesis tested was that there are no differences among the tricalcium silicate materials in terms of osteogenic potential. Standardized discs were cultured with MG-63 human osteoblastic-like cells to assess biocompatibility, the activity of alkaline phosphatase (ALP) and osteogenic potential. Biocompatibility was evaluated at baseline and after 24 and 48 h. Osteogenic differentiation was assessed after 15 days. Data were analyzed with one-way ANOVAs and Tukey’s post-hoc test (p < 0.05). All materials showed biocompatibility and bioactivity. ALP activity, which induces mineral nodule deposition, increased in all the cements tested, with a significant increase in RRMPU (p < 0.001) and FSP (p < 0.001) samples versus MTA. In vitro mineralization was significantly increased for RRMPU (p < 0.0001), FSP (p = 0.00012) and Biodentine™ (p < 0.0001) versus MTA. The bioceramics tested showed higher levels of biocompatibility and bioactivity than MTA; a higher capacity for mineralization was observed with RRMPU and FSP versus MTA.

Cytotoxicity, inflammation, biomineralization, and immunoexpression of IL-1β and TNF-α promoted by a new bioceramic cement

Aim To evaluate the cytotoxicity, biocompatibility and mineralization capacity of BIO-C PULPO, and MTA. Methodology L929 fibroblasts were cultured and MTT assay was used to determine the material cytotoxicity on 6, 24, and 48 h. A total of 30 male rats (Wistar) aged between 4 and 6 months, weighing between 250 and 300 g were used. Polyethylene tubes containing BIO-C PULPO, MTA, and empty tubes were implanted into dorsal connective tissue. After the experimental periods (7, 15, 30, 60, and 90 days) the tubes were histologically analyzed using hematoxylin-eosin (H&E), immunolabeling of IL-1β and TNF-α, and von Kossa staining, or without staining for polarized light analysis. The average number of inflammatory cells was quantified; the mineralization assessment was determined by the area marked in μm2 and semiquantitative immunolabeling analyses of IL-1β and TNF-α were performed. Then, data underwent statistical analysis with a 5% significance level. Results It was observed that BIO-C PULPO and MTA presented cytocompatibility at 6, 24, and 48 similar or higher than control for all evaluated period. On periods 7 and 15 days, BIO-C PULPO was the material with the highest number of inflammatory cells (p<0.05). On periods 30, 60, and 90 days, BIO-C PULPO and MTA presented similar inflammatory reactions (p>0.05). No statistical differences were found between Control, BIO-C PULPO, and MTA for immunolabeling of IL-1β and TNF-α in the different periods of analysis (p<0.05). Positive von Kossa staining and birefringent structures under polarized light were observed in all analyzed periods in contact with both materials, but larger mineralization area was found with BIO-C PULPO on day 90 (p<0.05). Conclusion BIO-C PULPO was biocompatible and induced mineralization similar to MTA.

Morphological and Spectroscopic Study of an Apatite Layer Induced by Fast-Set Versus Regular-Set EndoSequence Root Repair Materials

This study aimed to evaluate the morphology and chemistry of an apatite layer induced by fast-set versus regular-set EndoSequence root repair materials using spectroscopic analysis. Holes of a 4 mm diameter were created in the root canal dentin, which were filled with the test material. Fetal calf serum was used as the incubation medium, and the samples incubated in deionized water were used as controls. The material-surface and material-dentin interfaces were analyzed after 28 days using Raman and infrared spectroscopy, scanning electron microscopy/energy dispersive X-ray, and X-ray diffraction. After incubation in fetal calf serum, both materials formed a uniform layer of calcium phosphate precipitate on their surfaces, with the dentinal interface. This precipitated layer was a combination of hydroxyapatite and calcite or aragonite, and had a high mineral maturity with the regular-set paste. However, its crystallinity index was high with the fast-set putty. Typically, both consistencies (putty and paste) of root repair material have an apatite formation ability when they are incubated in fetal calf serum. This property could be beneficial in improving their sealing ability for root canal dentin.

Effect of Irrigants on the Push-Out Bond Strength of Two Bioceramic Root Repair Materials

The purpose of this study was to compare different irrigants’ effect on two EndoSequence root repair materials’ push-out bond strength. Sixty root slices were filled either with EndoSequence premixed fast-set putty or regular-set paste, and then immersed either in sodium hypochlorite, chlorhexidine gluconate, or saline (as control) for 30 min, after which the slices were subjected to the push-out test. The surface structures were evaluated with Scanning Electron Microscopy and Fourier Transform Infrared. Fast-set putty exhibited greater displacement resistance when immersed in saline and subjected to adhesive failure mode, while regular-set paste showed greater resistance when immersed in chlorhexidine and subjected to cohesive failure mode. Infrared analysis showed changes in organic filler, and carbonate and phosphate bands after using irrigants. The lowest carbonate/phosphate ratio was found for chlorhexidine in both materials. Therefore, sodium hypochlorite reduced EndoSequence root repair materials’ displacement resistance markedly.

Novel injectable strontium-hardystonite phosphate cement for cancellous bone filling applications

Injectable bone cement (IBC) such as those based on methacrylates and hydraulic calcium phosphate and calcium sulfate-based cements have been used extensively for filling bone defects with acceptable clinical outcomes. There is a need however for novel IBC materials that can address some of the inherent limitations of currently available formulations to widen the clinical application of IBC. In this study, we characterized a novel hydraulic IBC formulation consisting of bioactive strontium-doped hardystonite (Sr-HT) ceramic microparticles and sodium dihydrogen phosphate, herein named Sr-HT phosphate cement (SPC). The resultant cement is comprised of two distinct amorphous phases with embedded partially reacted crystalline reactants. The novel SPC formulation possesses a unique combination of physicochemical properties suitable for use as an IBC, and demonstrates in vitro cytocompatibility when seeded with primary human osteoblasts. In vivo injection of SPC into rabbit sinus defects show minor new bone formation at the SPC periphery, similar to those exhibited in sinus defects filled with a clinically available calcium phosphate cement. The current SPC formulation presented in this paper shows promise as a clinically applicable IBC which can be further enhanced with additives.

Physicochemical properties of calcium silicate-based formulations MTA Repair HP and MTA Vitalcem

Objective

This study aimed to analyze the following physicochemical properties: radiopacity, final setting time, calcium release, pH change, solubility, water sorption, porosity, surface morphology, and apatite-forming ability of two calcium silicate-based materials.

Material and methods

We tested MTA Repair HP and MTA Vitalcem in comparison with conventional MTA, analyzing radiopacity and final setting time. Water absorption, interconnected pores and apparent porosity were measured after 24-h immersion in deionized water at 37°C. Calcium and pH were tested up to 28 d in deionized water. We analyzed data using two-way ANOVA with Student-Newman-Keuls tests (p<0.05). We performed morphological and chemical analyses of the material surfaces using ESEM/EDX after 28 d in HBSS.

Results

MTA Repair HP showed similar radiopacity to that of conventional MTA. All materials showed a marked alkalinizing activity within 3 h, which continued for 28 d. MTA Repair HP showed the highest calcium release at 28 d (p<0.05). MTA Vitalcem showed statistically higher water sorption and solubility values (p<0.05). All materials showed the ability to nucleate calcium phosphate on their surface after 28 d in HBSS.

Conclusions

MTA Repair HP and MTA Vitalcem had extended alkalinizing activity and calcium release that favored calcium phosphate nucleation. The presence of the plasticizer in MTA HP might increase its solubility and porosity. The radiopacifier calcium tungstate can be used to replace bismuth oxide.

Evaluation of the bioactivity of fluoride-enriched mineral trioxide aggregate on osteoblasts

AIM

To investigate whether a combination of mineral trioxide aggregate (MTA) and fluoride compounds affects bone cells.

METHODOLOGY

Mineral trioxide aggregate (MTA) discs (ProRoot^® , Dentsply Sirona, Ballaigues, Switzerland) with and without the addition of 0.1%, 0.25% and 0.5% sodium fluoride were characterized for their surface roughness by laser scanning microscopy and for the adhesion of human alveolar osteoblasts by scanning electron microscopy. Using eluates from fluoride-enriched MTA discs, the cell proliferation was measured by monitoring the DNA incorporation of 5-bromo-2'-deoxyuridine. Further, gene expression was evaluated by qPCR arrays, extracellular matrix mineralization was quantified by absorption measurement of Alizarin red stains, and effects were calculated with repeated measures analysis and post hoc P-value adjustment.

RESULTS

Irrespective of fluoride addition, cell adhesion was similar on MTA discs, of which the surface roughness was comparable. Control osteoblasts had a curvilinear proliferation pattern peaking at d5, which was levelled out by incubation with MTA. The addition of fluoride partly restored the MTA-related reduction in the cellular proliferation rate in a dose-dependent manner. At the mRNA level, both fluoride and MTA modulated a number of genes involved in osteogenesis, bone mineral metabolism and extracellular matrix formation. Although MTA significantly impaired extracellular matrix mineralization, the addition of fluoride supported the formation of mineralized nodules in a dose-dependent manner.

CONCLUSION

The addition of fluoride modulated the biocompatibility of MTA in terms of supporting bone cell proliferation and hard tissue formation. Hence, fluoride enrichment is a trend-setting advancement for MTA-based endodontic therapies.

The physical properties and ion release of CPP-ACP-modified calcium silicate-based cements

BACKGROUND

This study investigated the physical properties and ion release of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP)-modified calcium silicate-based cements (CSCs) and compared the properties of a trial mineral trioxide aggregate (MTA) with two commercially available CSCs, Biodentine(™) and Angelus(®) MTA.

METHODS

The setting time, solubility, compressive strength and Vickers surface microhardness of the three CSCs incorporated with 0%, 0.5%, 1.0%, 2.0% and 3.0% (w/w) CPP-ACP were investigated. Release of calcium (Ca(2+) ), phosphate ions (Pi ) and pH of the test cements were measured after 24, 72, 168 and 336 h of storage.

RESULTS

The addition of up to 1.0% CPP-ACP into Biodentine(™) and 0.5% into the other cements did not adversely affect their physical properties except for the setting time. The addition of 0.5% CPP-ACP increased Ca(2+) released from Biodentine(™) (after 168 and 336 h), Angelus(®) MTA (after 168 h) and the trial MTA (after 72 h). The addition of 1.0-3.0% CPP-ACP increased Ca(2+) and Pi released from all the cements. Biodentine(™) released more Ca(2+) particularly in the early stages and showed shorter setting time and higher mechanical properties than the other cements. The mechanical properties of Angelus(®) MTA and the trial MTA were similar. All the cements produced highly alkaline storage solutions.

CONCLUSIONS

Up to 1.0% CPP-ACP in Biodentine(™) improves Ca(2+) and Pi release and 0.5% CPP-ACP in Angelus(®) MTA and the trial MTA improves Ca(2+) release without altering the mechanical properties and solubility. The addition of CPP-ACP into CSCs prolonged the setting time.

Calcium phosphate precipitation in experimental gaps between fluoride-containing fast-setting calcium silicate cement and dentin

A novel fast-setting calcium silicate cement containing fluoride (novel-CSC) has been developed for applications in tooth crowns. The aim of this study was to assess the ability of the novel-CSC to close the experimental gaps at the dentin-cement interface. The novel-CSC was tested against Vitrebond and GC Fuji II LC. Experimental gaps of 50 or 300 μm width were created between the materials and dentin. Specimens with the 300-μm-wide gap were immersed in phosphate-buffered saline and the closed gap area was measured during 96 h. All specimens with 50 or 300 μm gap width were analyzed by scanning electron microscopy equipped with energy dispersive X-ray spectroscopy (SEM/EDX) to assess the morphology and chemical composition of the precipitates after 96 h immersion in phosphate-buffered saline. High-resolution micro-computed tomography (μCT) was used to evaluate the integrity and continuity of the precipitiates after 96 h and 180 d. In all novel-CSC samples, precipitates closed the gap area completely after 96 h. The SEM/EDX revealed that the globular precipitates closing the gap area were mainly composed of calcium and phosphorus. After 180 d, μCT indicated thicker precipitates compared with initial precipitates only in the novel-CSC group, whereas no precipitates were observed in resin-modified glass ionomers. Novel-CSC promoted continuous precipitation of calcium phosphate, including apatite, and closed the experimental gaps.

Mineral trioxide aggregate and other bioactive endodontic cements: an updated overview - part II: other clinical applications and complications

Mineral trioxide aggregate (MTA) is a dental material used extensively for vital pulp therapies (VPT), protecting scaffolds during regenerative endodontic procedures, apical barriers in teeth with necrotic pulps and open apices, perforation repairs as well as root canal filling and root-end filling during surgical endodontics. A number of bioactive endodontic cements (BECs) have recently been introduced to the market. Most of these materials have calcium and silicate in their compositions; however, bioactivity is a common property of these cements. These materials include the following: BioAggregate, Biodentine, BioRoot RCS, calcium-enriched mixture cement, Endo-CPM, Endocem, EndoSequence, EndoBinder, EndoSeal MTA, iRoot, MicroMega MTA, MTA Bio, MTA Fillapex, MTA Plus, Neo MTA Plus, Ortho MTA, Quick-Set, Retro MTA, Tech Biosealer, and TheraCal LC. It has been claimed that these materials have properties similar to those of MTA but without the drawbacks. In Part I of this review, the available information on the chemical composition of the materials listed above was reviewed and their applications for VPT was discussed. In this article, the clinical applications of MTA and other BECs will be reviewed for apexification, regenerative endodontics, perforation repair, root canal filling, root-end filling, restorative procedures, periodontal defects and treatment of vertical and horizontal root fractures. In addition, the literature regarding the possible drawbacks of these materials following their clinical applications is reviewed. These drawbacks include their discolouration potential, systemic effects and retreatability following use as a root filling material. Based on selected keywords, all publications were searched regarding the use of MTA as well as BECs for the relevant clinical applications. Numerous publications were found regarding the use of BECs for various endodontic applications. The majority of these investigations compared BECs with MTA. Despite promising results for some materials, the number of publications using BECs for various clinical applications was limited. Furthermore, most studies had several methodological shortcomings and low levels of evidence.

Apatite precipitation on a novel fast-setting calcium silicate cement containing fluoride

Aim: Calcium silicate cements are widely used in endodontics. Novel fast-setting calcium silicate cement with fluoride (Protooth) has been developed for potential applications in teeth crowns including cavity lining and cementation.

Objective: To evaluate the surface apatite-forming ability of Protooth compositions as a function of fluoride content and immersion time in phosphate-buffered saline (PBS).

Material and methods: Three cement compositions were tested: Protooth (3.5% fluoride and 10% radiocontrast), ultrafast Protooth (3.5% fluoride and 20% radiocontrast), and high fluoride Protooth (15% fluoride and 25% radiocontrast). Powders were cap-mixed with liquid, filled to the molds and immersed in PBS. Scanning electron microscopy, energy dispersive X-ray analysis, and Raman spectroscopy were used to characterize the precipitations morphology and composition after 1, 7, 28, and 56 days. Apatite/belite Raman peak height indicated the apatite thickness.

Results: Spherical calcium phosphate precipitations with acicular crystallites were formed after 1-day immersion in PBS and Raman spectra disclosed the phosphate band at 965 cm⁻¹, supporting the apatite formation over Protooth compositions. The apatite deposition continued and more voluminous precipitations were observed after 56 days over the surface of all cements. Raman bands suggested the formation of β-type carbonated apatite over Protooth compositions. High fluoride Protooth showed the most compact deposition with significantly higher apatite/belite ratio compared to Protooth and ultrafast Protooth after 28 and 56 days.

Conclusions: Calcium phosphate precipitations (apatite) were formed over Protooth compositions after immersion in PBS with increasing apatite formation as a function of time. High fluoride Protooth exhibited thicker apatite deposition.

Nanomaterials: the next step in injectable bone cements

Injectable bone cements (IBCs) are biocompatible materials that can be used as bone defect fillers in maxillofacial surgeries and in orthopedic fracture treatment in order to augment weakened bone due to osteoporosis. Current clinically available IBCs, such as polymethylmethacrylate and calcium phosphate cement, have certain advantages; however, they possess several drawbacks that prevent them from gaining universal acceptance. New gel-based injectable materials have also been developed, but these are too mechanically weak for load-bearing applications. Recent research has focused on improving various injectable materials using nanomaterials in order to render them suitable for bone tissue regeneration. This article outlines the requirements of IBCs, the advantages and limitations of currently available IBCs and the state-of-the-art developments that have demonstrated the effects of nanomaterials within injectable systems.

Calcium Silicate and Calcium Hydroxide Materials for Pulp Capping: Biointeractivity, Porosity, Solubility and Bioactivity of Current Formulations

Aim

The chemical-physical properties of novel and long-standing calcium silicate cements versus conventional pulp capping calcium hydroxide biomaterials were compared.

Methods

Calcium hydroxide–based (Calxyl, Dycal, Life, Lime-Lite) and calcium silicate–based (ProRoot MTA, MTA Angelus, MTA Plus, Biodentine, Tech Biosealer capping, TheraCal) biomaterials were examined. Calcium and hydroxyl ion release, water sorption, interconnected open pores, apparent porosity, solubility and apatite-forming ability in simulated body fluid were evaluated.

Results

All calcium silicate materials released more calcium. Tech Biosealer capping, MTA Plus gel and Biodentine showed the highest values of calcium release, while Lime-Lite the lowest. All the materials showed alkalizing activity except for Life and Lime-Lite. Calcium silicate materials showed high porosity values: Tech Biosealer capping, MTA Plus gel and MTA Angelus showed the highest values of porosity, water sorption and solubility, while TheraCal the lowest. The solubility of water-containing materials was higher and correlated with the liquid-to-powder ratio. Calcium phosphate (CaP) deposits were noted on materials surfaces after short aging times. Scant deposits were detected on Lime-Lite. A CaP coating composed of spherulites was detected on all calcium silicate materials and Dycal after 28 days. The thickness, continuity and Ca/P ratio differed markedly among the materials. MTA Plus showed the thickest coating, ProRoot MTA showed large spherulitic deposits, while TheraCal presented very small dense spherulites.

Conclusions

calcium silicate-based cements are biointeractive (ion-releasing) bioactive (apatite-forming) functional biomaterials. The high rate of calcium release and the fast formation of apatite may well explain the role of calcium silicate biomaterials as scaffold to induce new dentin bridge formation and clinical healing.

Use of calcium-containing endodontic sealers as apical barrier in fluid-contaminated wide-open apices

PURPOSE

The sealing of wide-open apex roots is still a challenge and requires the use of apical barrier techniques. The aim was to evaluate ex vivo the sealing and the apical morphology of 3 commercial calcium oxide (CaO)-containing sealers - namely, 2 zinc oxide-based (CRCS and Sealapex) and a calcium silicate MTA-based (TechBiosealer Endo) - placed in wet root canals with artificial wide-open apices.


METHODS

Thirty human single-rooted teeth were shaped with Protaper and an artificial open apex (diameter size 110) was created. Each root was inserted in a custom-designed support containing simulated body fluid (Hank's balanced salt solution, HBSS) at the bottom simulating the presence of periapical fluid in the canal. Each sealer (TechBiosealer Endo, CRCS, Sealapex) was compacted to the apical 5 mm and the filled roots stored in HBSS at 37°C. The sealing was evaluated as microinfiltrated fluid since 24 hours up to 6 months using a high-precision digital fluid flow meter. The sealers were also studied for setting time in HBSS, calcium releasing (statistical analysis by 2-way ANOVA followed by Student-Newman-Keuls test, P<0.05) and surface morpho-chemistry by ESEM-EDX and OM analysis.


RESULTS

All sealers showed a stable seal. TechBiosealer Endo maintained a better seal than the other materials (P<0.05) and ESEM-EDX and OM analyses showed the presence of apatite deposits.


CONCLUSIONS

The clinical use of hydraulic hydrophilic MTA-based sealers can be recommended to stop/reduce the fluid flow rate through the apex. The artificial apical barrier in wet wide apices is a suitable technique able to seal wet root canals.

A review of the bioactivity of hydraulic calcium silicate cements

OBJECTIVES

In tissue regeneration research, the term "bioactivity" was initially used to describe the resistance to removal of a biomaterial from host tissues after intraosseous implantation. Hydraulic calcium silicate cements (HCSCs) are putatively accepted as bioactive materials, as exemplified by the increasing number of publications reporting that these cements produce an apatite-rich surface layer after they contact simulated body fluids.

METHODS

In this review, the same definitions employed for establishing in vitro and in vivo bioactivity in glass-ceramics, and the proposed mechanisms involved in these phenomena are used as blueprints for investigating whether HCSCs are bioactive.

RESULTS

The literature abounds with evidence that HCSCs exhibit in vitro bioactivity; however, there is a general lack of stringent methodologies for characterizing the calcium phosphate phases precipitated on HCSCs. Although in vivo bioactivity has been demonstrated for some HCSCs, a fibrous connective tissue layer is frequently identified along the bone-cement interface that is reminiscent of the responses observed in bioinert materials, without accompanying clarifications to account for such observations.

CONCLUSIONS

As bone-bonding is not predictably achieved, there is insufficient scientific evidence to substantiate that HCSCs are indeed bioactive. Objective appraisal criteria should be developed for more accurately defining the bioactivity profiles of HCSCs designed for clinical use.