Thigmomorphogenesis: the role of ethylene in the response of Pinus taeda and Abies fraseri to mechanical perturbation

Touch-induced seedling morphological changes are determined by ethylene-regulated pectin degradation

How mechanical forces regulate plant growth is a fascinating and long-standing question. After germination underground, buried seedlings have to dynamically adjust their growth to respond to mechanical stimulation from soil barriers. Here, we designed a lid touch assay and used atomic force microscopy to investigate the mechanical responses of seedlings during soil emergence. Touching seedlings induced increases in cell wall stiffness and decreases in cell elongation, which were correlated with pectin degradation. We revealed that PGX3, which encodes a polygalacturonase, mediates touch-imposed alterations in the pectin matrix and the mechanics of morphogenesis. Furthermore, we found that ethylene signaling is activated by touch, and the transcription factor EIN3 directly associates with PGX3 promoter and is required for touch-repressed PGX3 expression. By uncovering the link between mechanical forces and cell wall remodeling established via the EIN3-PGX3 module, this work represents a key step in understanding the molecular framework of touch-induced morphological changes.

Thigmomorphogenesis and biomechanical responses of shade-grown Serianthes nelsonii plants to stem flexure

The influences of stem flexure on shade-grown Serianthes nelsonii Merr. stem growth and strength were determined in a container nursery setting. Treated stems were bent 90° two times daily for a 14 wk nursery production period. Plant height, internode length, and slenderness were decreased by stem flexure when compared with control plants that received no flexure. Two force-displacement tests revealed stem strength was increased by the flexure treatment. Control plants exhibited undesirable lean of the main stem, and 1 hr of wind stress further increased the angle of lean. Treated plants were close to orthotropic and the wind stress did not change the stem lean. Results indicate stem flexure is a reliable method for increasing the quality of shade-grown S. nelsonii plants and some form of mechanical stimulation should be added to nursery production protocols for the species.

Forest trees filter chronic wind-signals to acclimate to high winds

Controlled experiments have shown that trees acclimate thigmomorphogenetically to wind-loads by sensing their deformation (strain). However, the strain regime in nature is exposed to a full spectrum of winds. We hypothesized that trees avoid overreacting by responding only to winds which bring information on local climate and/or wind exposure. Additionally, competition for light dependent on tree social status also likely affects thigmomorphogenesis. We monitored and manipulated quantitatively the strain regimes of 15 pairs of beech (Fagus sylvatica) trees of contrasting social status in an acclimated stand, and quantified the effects of these regimes on the radial growth over a vegetative season. Trees exposed to artificial bending, the intensity of which corresponds to the strongest wind-induced strains, enhanced their secondary growth by at least 80%. Surprisingly, this reaction was even greater - relatively - for suppressed trees than for dominant ones. Acclimated trees did not sense the different types of wind events in the same way. Daily wind speed peaks due to thermal winds were filtered out. Thigmomorphogenesis was therefore driven by intense storms. Thigmomorphogenesis is also likely to be involved in determining social status.

Review: Wind impacts on plant growth, mechanics and damage

Land plants have adapted to survive under a range of wind climates and this involve changes in chemical composition, physical structure and morphology at all scales from the cell to the whole plant. Under strong winds plants can re-orientate themselves, reconfigure their canopies, or shed needles, leaves and branches in order to reduce the drag. If the wind is too strong the plants oscillate until the roots or stem fail. The mechanisms of root and stem failure are very similar in different plants although the exact details of the failure may be different. Cereals and other herbaceous crops can often recover after wind damage and even woody plants can partially recovery if there is sufficient access to water and nutrients. Wind damage can have major economic impacts on crops, forests and urban trees. This can be reduced by management that is sensitive to the local site and climatic conditions and accounts for the ability of plants to acclimate to their local wind climate. Wind is also a major disturbance in many plant ecosystems and can play a crucial role in plant regeneration and the change of successional stage.

Five willow varieties cultivated across diverse field environments reveal stem density variation associated with high tension wood abundance

Sustainable and inexpensive production of biomass is necessary to make biofuel production feasible, but represents a challenge. Five short rotation coppice willow cultivars, selected for high biomass yield, were cultivated on sites at four diverse regions of Quebec in contrasting environments. Wood composition and anatomical traits were characterized. Tree height and stem diameter were measured to evaluate growth performance of the cultivars according to the diverse pedoclimatic conditions. Each cultivar showed very specific responses to its environment. While no significant variation in lignin content was observed between sites, there was variation between cultivars. Surprisingly, the pattern of substantial genotype variability in stem density was maintained across all sites. However, wood anatomy did differ between sites in a cultivar (producing high and low density wood), suggesting a probable response to an abiotic stress. Furthermore, twice as many cellulose-rich G-fibers, comprising over 50% of secondary xylem, were also found in the high density wood, a finding with potential to bring higher value to the lignocellulosic bioethanol industry.

Proliferation of axial parenchymatic xylem cells is a key step in wound closure of girdled stems in Pinus canariensis

BACKGROUND

Wounds caused by fire, herbivorism, rock impacts, etc. cause the direct loss of photosynthetic, storage and/or vascular tissue. In addition, they may entail other damages, such as desiccation of the exposed internal parts, or become a gateway to infection by fungi and other pathogens. To successfully overcome such injuries, plants must reorganize their meristems or even differentiate new ones, producing new traumatic tissues to cover the wound and restore the vascular connection.

RESULTS

In this work we analyse the anatomical growth response in conifers after debarking and injuring the vascular cambium, using Pinus canariensis as model species, due to its high wound recovery ability. Conversely to angiosperm woody species, this process is initiated and largely driven by the damaged vascular cambium and not by proliferation in the wound surface. We have detected alterations and switches in the divisions of cambial cells, associated to their position relative to the surface and edges of the wound, resulting in disordered traumatic xylem. We also describe the formation of column-like structures, after girdling, which are in part formed by the proliferation of xylem parenchymatous cells, associated to axial resin ducts.

CONCLUSIONS

Abundant resinosis on the wound surface, typical of conifers, is an efficient barrier against opportunistic fungi, insects, etc. but it also hinders the healing process directly from the surface. Thus, wound closure must be largely carried out from the wound margins, being a much slower process, which very often remains unconcluded for long years. This work also describes for the first time the proliferation of inner parenchymatous cells to form column-like structures, which accelerates wound closure in girdled P. canariensis. Irregularities in the surface of the healing edge or column-like structures result in the production of disordered vascular tissues, compromising their future functionality, and which must be overcome through the fast restoration of the proper polarity in vascular cambium.

Responses to environmental stresses in woody plants: key to survive and longevity

Environmental stresses have adverse effects on plant growth and productivity, and are predicted to become more severe and widespread in decades to come. Especially, prolonged and repeated severe stresses affecting growth and development would bring down long-lasting effects in woody plants as a result of its long-term growth period. To counteract these effects, trees have evolved specific mechanisms for acclimation and tolerance to environmental stresses. Plant growth and development are regulated by the integration of many environmental and endogenous signals including plant hormones. Acclimation of land plants to environmental stresses is controlled by molecular cascades, also involving cross-talk with other stresses and plant hormone signaling mechanisms. This review focuses on recent studies on molecular mechanisms of abiotic stress responses in woody plants, functions of plant hormones in wood formation, and the interconnection of cell wall biosynthesis and the mechanisms shown above. Understanding of these mechanisms in depth should shed light on the factors for improvement of woody plants to overcome severe environmental stress conditions.

Signaling and gene regulatory programs in plant vascular stem cells

A key question about the development of multicellular organisms is how they precisely control the complex pattern formation during their growth. For plants to grow for many years, a tight balance between pluripotent dividing cells and cells undergoing differentiation should be maintained within stem cell populations. In this process, cell-cell communication plays a central role by creating positional information for proper cell type patterning. Cell-type specific gene regulatory networks govern differentiation of cells into particular cell types. In this review, we will provide a comprehensive overview of emerging key signaling and regulatory programs in the stem cell population that direct morphogenesis of plant vascular tissues.

Effect of mechanical perturbation on the biomechanics, primary growth and secondary tissue development of inflorescence stems of Arabidopsis thaliana

BACKGROUND AND AIMS

Mechanical perturbation is known to inhibit elongation of the inflorescence stem of Arabidopsis thaliana. The phenomenon has been reported widely for both herbaceous and woody plants, and has implications for how plants adjust their size and form to survive in mechanically perturbed environments. While this response is an important aspect of the plant's architecture, little is known about how mechanical properties of the inflorescence stem are modified or how its primary and secondary tissues respond to mechanical perturbation.

METHODS

Plants of the Columbia-0 ecotype were exposed to controlled brushing treatments and then submitted to three-point bending tests to determine stem rigidity and stiffness. Contributions of different tissues to the inflorescence stem geometry were analysed.

KEY RESULTS

Perturbed plants showed little difference in stem diameter, were 50 % shorter, 75 % less rigid and 70 % less stiff than controls. Changes in mechanical properties were linked to significant changes in tissue geometry - size and position of the pith, lignified interfascicular tissue and cortex - as well as a reduction in density of lignified cells. Stem mechanical properties were modified by changes in primary tissues and thus differ from changes observed in most woody plants tested with indeterminate growth - even though a vascular cambium is present in the inflorescence axis.

CONCLUSIONS

The study suggests that delayed development of key primary developmental features of the stem in this ecotype of Arabidopsis results in a 'short and flexible' rather than a 'short and rigid' strategy for maintaining upright axes in conditions of severe mechanical perturbation. The mechanism is comparable with more general phenomena in plants where changes in developmental rate can significantly affect the overall growth form of the plant in both ecological and evolutionary contexts.

Stem cell function during plant vascular development

While many regulatory mechanisms controlling the development and function of root and shoot apical meristems have been revealed, our knowledge of similar processes in lateral meristems, including the vascular cambium, is still limited. Our understanding of even the anatomy and development of lateral meristems (procambium or vascular cambium) is still relatively incomplete, let alone their genetic regulation. Research into this particular tissue type has been mostly hindered by a lack of suitable molecular markers, as well as the fact that thus far very few mutants affecting plant secondary development have been described. The development of suitable molecular markers is a high priority in order to help define the anatomy, especially the location and identity of cambial stem cells and the developmental phases and molecular regulatory mechanisms of the cambial zone. To date, most of the advances have been obtained by studying the role of the major plant hormones in vascular development. Thus far auxin, cytokinin, gibberellin and ethylene have been implicated in regulating the maintenance and activity of cambial stem cells; the most logical question in research would be how these hormones interact during the various phases of cambial development.

Characterization of a 1-aminocyclopropane-1-carboxylate synthase gene from loblolly pine (Pinus taeda L.)

1-Aminocyclopropane-1-carboxylate (ACC) synthase catalyzes what is typically the rate-limiting step in the biosynthesis of ethylene, a gaseous plant growth regulator that plays numerous roles in the growth and development of higher plants. Although ACC synthase genes have been characterized from a wide variety of angiosperm plant species, no ACC synthase genes have been described previously for gymnosperms. Evidence suggests that ethylene helps to regulate wood formation in trees, and may also signal for the metabolic shifts that lead to compression wood formation on the undersides of branches and leaning stems in gymnosperm trees. Since compression wood is an inferior feedstock for the manufacturing of most wood products, a better understanding of the factors influencing its formation could lead to substantial economic benefits. This study describes the isolation and characterization of a putative ACC synthase gene, PtaACS1, from loblolly pine (Pinus taeda L.), an important commercial forest tree species. Also described is an apparent splice variant of PtaACS1 (PtaACS1s) that is missing 138 bp from the 5' end of the transcript, including bases that encode a conserved amino acid residue considered critical for ACC synthase activity. The two sequences share interesting homologies with a group of plant aminotransferases, in addition to ACC synthases, but structural models and the conservation of critical catalytic amino acid residues strongly support PtaACS1 as encoding an active ACC synthase. The two transcripts were differentially expressed in various tissues of loblolly pine, as well as in response to perturbations of pine seedling stems. Transcript levels of this ACC synthase gene increased rapidly in response to bending stress but returned to near starting levels within 30 min. It remains unclear to what extent bending-induced expression of this gene product plays a role in compression wood formation.

Height convergence in response to neighbour growth: genotypic differences in the stoloniferous plant Potentilla reptans

Using a new experimental set up, the way in which height growth of stoloniferous plants is adjusted to that of their neighbours, as well as differences between genotypes in their ability to keep up with neighbour height growth were tested. Five Potentilla reptans genotypes inherently differing in petiole length were subjected to three experimental light gradients, involving light intensity and red : far-red ratio. Each plant was placed in a vertically adjustable cylinder of green foil, and the treatments differed in the speed of cylinder height increase and final height. Total weight of plants decreased from the 'Slow' to the 'Fast' treatment, while petiole length increased. Leaves reaching the top of the cylinder stopped petiole elongation, resulting in similar final heights for all genotypes in the 'Slow' treatment. In the 'Fast' treatment only the fastest-growing genotype maintained its position in the top of the cylinder and genotypes differed strongly in final height within the cylinders. Plants adjust their height growth to that of the surrounding vegetation, leading to height convergence in short light gradients that slowly increase. These adjustments and genotypic differences in ability to keep up with fast-growing neighbours can influence the outcome of competition for light.

Plant growth forms: an ecological and evolutionary perspective

Trees, shrubs, lianas and herbs have widely different mechanical architectures, which can also vary phenotypically with the environment. This review investigates how environmental effects, particularly mechanical perturbation, can influence biomechanical development in self-supporting and climbing growth forms. The bifacial vascular cambium is discussed in terms of its significance to growth form variation, ecology and evolution among extant plants, and during its appearance and early evolution. A key aspect of this developmental innovation concerned its potential for architectural and mechanical variation in response to environmental effects as well as optimizing hydraulic supply before the appearance of laminate leaves. Growth form diversity and its importance to past and present ecosystems are discussed in relation to both evolutionary constraints and ecological factors such as climatic change and atmospheric CO2 concentrations. We discuss how widely ranging growth forms such as climbers show a large range of developmental and phenotypic variation that has much to offer in understanding how the environment can modify plant development, particularly in terms of the bifacial vascular cambium. The broad approach we propose would benefit a wide range of studies from research into wood development to long-term ecological censuses of today's potentially changing ecosystems.

Methyl jasmonate-induced ethylene production is responsible for conifer phloem defense responses and reprogramming of stem cambial zone for traumatic resin duct formation

Conifer stem pest resistance includes constitutive defenses that discourage invasion and inducible defenses, including phenolic and terpenoid resin synthesis. Recently, methyl jasmonate (MJ) was shown to induce conifer resin and phenolic defenses; however, it is not known if MJ is the direct effector or if there is a downstream signal. Exogenous applications of MJ, methyl salicylate, and ethylene were used to assess inducible defense signaling mechanisms in conifer stems. MJ and ethylene but not methyl salicylate caused enhanced phenolic synthesis in polyphenolic parenchyma cells, early sclereid lignification, and reprogramming of the cambial zone to form traumatic resin ducts in Pseudotsuga menziesii and Sequoiadendron giganteum. Similar responses in internodes above and below treated internodes indicate transport of a signal giving a systemic response. Studies focusing on P. menziesii showed MJ induced ethylene production earlier and 77-fold higher than wounding. Ethylene production was also induced in internodes above the MJ-treated internode. Pretreatment of P. menziesii stems with the ethylene response inhibitor 1-methylcyclopropene inhibited MJ and wound responses. Wounding increased 1-aminocyclopropane-1-carboxylic acid (ACC) oxidase protein, but MJ treatment produced a higher and more rapid ACC oxidase increase. ACC oxidase was most abundant in ray parenchyma cells, followed by cambial zone cells and resin duct epithelia. The data show these MJ-induced defense responses are mediated by ethylene. The cambial zone xylem mother cells are reprogrammed to differentiate into resin-secreting epithelial cells by an MJ-induced ethylene burst, whereas polyphenolic parenchyma cells are activated to increase polyphenol production. The results also indicate a central role of ray parenchyma in ethylene-induced defense.

Asymmetric expression of a poplar ACC oxidase controls ethylene production during gravitational induction of tension wood

Ethylene is produced in wood-forming tissues, and when applied exogenously, it has been shown to cause profound effects on the pattern and rate of wood development. However, the molecular regulation of ethylene biosynthesis during wood formation is poorly understood. We have characterised an abundant 1-aminocyclopropane-1-carboxylic acid (ACC) oxidase gene (PttACO1) in the wood-forming tissues of Populus tremula (L.) x P. tremuloides (Michx). PttACO1 is primarily expressed in developing secondary xylem, and is specifically upregulated during secondary wall formation. Nevertheless, according to GC-MS analysis combined with tangential cryosectioning, the distribution of ACC was found to be fairly uniform across the cambial-region tissues. Gravitational stimulation, which causes tension wood to form on the upper side of the stem, resulted in a strong induction of PttACO1 expression and ACC oxidase activity in the tension wood-forming tissues. The ACC levels increased in parallel to the PttACO1 expression. However, the increase on the upper (tension wood) side was only minor, whereas large amounts of both ACC and its hydrolysable conjugates accumulated on the lower (opposite) side of the stem. This suggests that the relatively low level of ACC on the tension wood side is a result of its conversion to ethylene by the highly upregulated PttACO1, and the concurrent accumulation of ACC on the opposite side of the wood is because of the low PttACO1 levels. We conclude that PttACO1 and ACC oxidase activity, but not ACC availability, are important in the control of the asymmetric ethylene production within the poplar stem when tension wood is induced by gravitational stimulation.

Compression wood-responsive proteins in developing xylem of maritime pine (Pinus pinaster ait.)

When a conifer shoot is displaced from its vertical position, compression wood (CW) is formed on the under side and can eventually return the shoot to its original position. Changes in cell wall structure and chemistry associated with CW are likely to result from differential gene/protein expression. Two-dimensional polyacrylamide gel electrophoresis of differentiating xylem proteins was combined with the physical characterization of wooden samples to identify and characterize CW-responsive proteins. Differentiating xylem was harvested from a 22-year-old crooked maritime pine (Pinus pinaster Ait.) tree. Protein extracted from different samples were revealed by high-resolution silver stained two-dimensional polyacrylamide gel electrophoresis and analyzed with a computer-assisted system for single spot quantification. Growth strain (GS) measurements allowed xylem samples to be classified quantitatively from normal wood to CW. Regression of lignin and cellulose content on GS showed that an increase in the percentage of lignin and a decrease of the percentage of cellulose corresponded to increasing GS values, i.e. CW. Of the 137 studied spots, 19% were significantly associated with GS effect. Up-regulated proteins included 1-aminocyclopropane-1-carboxylate oxidase (an ethylene forming enzyme), a putative transcription factor, two lignification genes (caffeic O-methyltransferase and caffeoyl CoA-O-methyltransferase), members of the S-adenosyl-L-methionine-synthase gene family, and enzymes involved in nitrogen and carbon assimilation (glutamine synthetase and fructokinase). A clustered correlation analysis was performed to study simultaneously protein expression along a gradient of gravistimulated stressed xylem tissue. Proteins were found to form "expression clusters" that could identify: (a) Gene product under similar control mechanisms, (b) partner proteins, or (c) functional groups corresponding to specialized pathways. The possibility of obtaining regulatory correlations and anticorrelations between proteins provide us with a new category of homology (regulatory homology) in tracing functional relationships.

The influences of increased CO2 and water supply on growth, biomass allocation and water use efficiency of Sinapis alba L. grown under different wind speeds

We examined how independent and interactive effects of CO₂ concentrations, water supply and wind speed affect growth rates, biomass partitioning, water use efficiency, diffusive conductance and stomatal density of plants. To test the prediction that wind stress will be ameliorated by increased CO₂ and/or by unrestricted water supply we grew Sinapis alba L. plants in controlled chambers under combinations of two levels of CO₂ (350 ppmv, 700 ppmv), two water regimes and two wind speeds (0.3 ms^-1, 3.7 ms^-1). We harvested at ten different dates over a period of 60 days. A growth analysis was carried out to evaluate treatment effects on plant responses. Plants grown both in increased CO₂ and in low wind conditions had significantly greater stem length, leaf area and dry weights of plant parts. Water supply significantly affected stem diameter, root weight and leaf area. CO₂ enrichment significantly increased the rate of biomass accumulation and the relative ratio of biomass increase to leaf area expansion. High wind speed significantly reduced plant growth rates and the rate of leaf area expansion was reduced more than the rate of biomass accumulation. Regression analysis showed significant CO₂ effects on the proportion of leaf and stem dry weight to total dry weight. A marked plant-age effect was dependent on water supply, wind speed and CO₂ concentration. A reduced water supply significantly decreased the stomatal conductance, and water use efficiency significantly increased with a limited water supply, low wind and increased CO₂. We found significant CO₂ x wind effects for water diffusion resistance, adaxial number of stomata and water use efficiencies and significant wind x water effect for water use efficiency. In conclusion, wind stress was ameliorated by growing in unrestricted water but not by growing in increased CO₂.

Thigmomorphogenesis: the effect of mechanical perturbation on plants

Thigmomorphogenetic responses occur in many environmental settings. The most pronounced effects are found under conditions of extremely high rates of turbulent wind or water flow. However, it is an ubiquitous phenomenon, since mechanical perturbations are to be encountered under all but the most stringent laboratory conditions. Our present understanding of these phenomena is the result of studies at the ecological, anatomical, physiological, biochemical, biophysical and molecular biological levels.

Rain-, wind-, and touch-induced expression of calmodulin and calmodulin-related genes in Arabidopsis

In response to water spray, subirrigation, wind, touch, wounding, or darkness, Arabidopsis regulates the expression of at least four touch-induced (TCH) genes. Ten to thirty minutes after stimulation, mRNA levels increase up to 100-fold. Arabidopsis plants stimulated by touch develop shorter petioles and bolts. This developmental response is known as thigmomorphogenesis. TCH 1 cDNA encodes the putative Arabidopsis calmodulin differing in one amino acid from wheat calmodulin. Sequenced regions of TCH 2 and TCH 3 contain 44% and 70% amino acid identities to calmodulin, respectively. The regulation of this calmodulin-related gene family in Arabidopsis suggests that calcium ions and calmodulin are involved in transduction of signals from the environment, enabling plants to sense and respond to environmental changes.