Effect of the addition of silanated silica on the mechanical properties of microwave heat-cured acrylic resin

The flexural strength of orthodontic acrylic resin containing resveratrol nanoparticles as antimicrobial agent: An in vitro study

OBJECTIVE

This study aimed to evaluate how the addition of resveratrol nanoparticles (RNPs), which act as an antimicrobial agent, affects the strength of acrylic resin used in orthodontics.

METHODS

According to ISO 20795-1-2013, 76 cold cure acrylic resin samples (65×10×3.3mm) were prepared. The samples were divided into four groups (19 samples in each group) based on RN concentrations added to 1mL acrylic monomer (0 for control, 256, 512, and 1024μg/mL). Flexural strength was assessed in megapascal (MPa) using a universal testing machine. Data analysis involved nonparametric Kruskal-Wallis analysis of variance and pairwise post-hoc Dunn's test.

RESULTS

The flexural strength decreased as the concentration of RNPs increased, with the lowest value observed at 1024μg/mL (63.06±5.33MPa). The control group exhibited the highest mean of flexural strength (88.43±4.41MPa), followed by the groups with RNPs at the concentrations of 256μg/mL (82.69±4.41MPa) and 512μg/mL (76.02±4.59MPa).

CONCLUSION

In conclusion, the addition of RNs to orthodontic acrylic resin had a dose-dependent impact on its flexural strength. Based on the findings, we recommend incorporating RNs at a concentration of 256μg/mL as an antimicrobial agent in orthodontic acrylic resin. However, further research is necessary to assess the long-term effects and clinical applications of this approach.

Mapping the research landscape of nanoparticles and their use in denture base resins: a bibliometric analysis

BACKGROUND

Nanoparticles are increasingly used in dentistry for various applications, including enhancing the mechanical properties of denture base resins. This study aimed to comprehensively review and analyze the research landscape of nanoparticles and their effect on the flexural strength of denture base resins to identify key research areas and trends and to highlight the importance of collaboration between authors and institutions.

METHODS

A Bibliometric Analysis was conducted using the Keywords "Nanoparticle*" AND "Denture*" OR "CAD/CAM." The literature search from the WOS database was restricted to the publication years 2011 to 2022.

RESULTS

Key findings encompass an increase in research publications but a decline in citations. Saudi Arabia, China, and Iraq led this research, with specific institutions excelling. Notable journals with high impact factors were identified. Authorship patterns show variations in citation impact. Additionally, keyword analysis revealed that current research trends offer insights into influential authors and their networks.

CONCLUSIONS

The analysis of nanoparticles and denture base resins reveals a dynamic and evolving landscape that emphasizes the importance of collaboration, staying current with research trends, and conducting high-quality research in this ever-evolving domain.

The effect of different concentration of emodin nanoparticles, as an antibacterial agent, on the flexural resistance of acrylic resin used in orthodontics: An in vitro study

OBJECTIVE

The aim of this study was to investigate the impact of emodin nanoparticles (n-Emo) on the flexural strength of acrylic resin used in orthodontics.

METHODS

A total of 24 acrylic resin discs were prepared according to ISO:20795-1 and divided into four groups (n=6): 0% n-Emo, 0.5% n-Emo, 1% n-Emo, and 2% n-Emo. The flexural strength of each group was measured using the Universal Testing Machine. One-way analysis of variance (ANOVA) and Tukey tests were used to analyse the data.

RESULTS

The highest flexural strength values were observed in the groups containing 0% and 0.5% concentrations of n-Emo, while the lowest mean flexural strength was recorded in the group containing 2% concentration of n-Emo. There were significant difference in flexural strength values between the groups containing 0% with those containing 1% and 2% concentrations (P=0.045, P=0.011, respectively), as well as between those containing 0.5% and 2% concentrations of n-Emo (P=0.041).

CONCLUSIONS

The results of the study showed that the incorporation of n-Emo had a negative impact on the flexural strength of the acrylic resin utilized in orthodontics. Nonetheless, the mean flexural strength values of all groups fell within the normal range, implying that the addition of n-Emo did not jeopardize the mechanical properties of the acrylic resin. It is therefore conceivable that the use of n-Emo as an antimicrobial agent in acrylic resin could be a promising approach to reducing enamel demineralisation and dental caries, while preserving its mechanical properties. This study was approved by the ethics committee of the Tehran University of Medical Sciences (1401-2-398-54892).

Influence of inorganic nanoparticles on dental materials' mechanical properties. A narrative review

Inorganic nanoparticles have been widely incorporated in conventional dental materials to help in improving their properties. The literature has shown that incorporating nanoparticles in dental materials in different specialties could have a positive effect on reinforcing the mechanical properties of those materials; however, there was no consensus on the effectiveness of using nanoparticles in enhancing the mechanical properties of dental materials, due to the variety of the properties of nanoparticles itself and their effect on the mechanical properties. This article attempted to analytically review all the studies that assessed the effect of different types of inorganic nanoparticles on the most commonly used dental materials in dental specialties such as polymethyl methacrylate, glass ionomer cement, resin composite, resin adhesive, orthodontic adhesive, and endodontic sealer. The results had shown that those inorganic nanoparticles demonstrated positive potential in improving those mechanical properties in most of the dental materials studied. That potential was attributed to the ultra-small sizes and unique physical and chemical qualities that those inorganic nanoparticles possess, together with the significant surface area to volume ratio. It was concluded from this comprehensive analysis that while a definitive recommendation cannot be provided due to the variety of nanoparticle types, shapes, and incorporated dental material, the consensus suggests using nanoparticles in low concentrations less than 1% by weight along with a silane coupling agent to minimize agglomeration issues and benefit from their properties.

Comparative Effect of Incorporation of ZrO2, TiO2, and SiO2 Nanoparticles on the Strength and Surface Properties of PMMA Denture Base Material: An In Vitro Study

Objective

This study aimed to investigate the effects of nanoparticles (zirconium dioxide (ZrO₂), titanium dioxide (TiO₂), and silicon dioxide (SiO₂)) on the flexural strength, impact strength, hardness, and wear resistance of the acrylic resin denture base material.

Materials and Methods

Acrylic resin specimens were fabricated in dimensions according to American Dental Association (ADA) specifications per test. Specimens were divided according to nanofiller into four groups; unmodified as control, ZrO₂ (Z), TiO₂, (T), and SiO₂ (S) groups. Each one was subdivided into two subgroups according to nanoparticle concentrations; 3% and 7% (Z3, Z7, T3, T7, S3, and S7). A 3-point bending test, Charpy impact test, and Vickers hardness test were used for flexural strength, impact strength, and hardness measurements, respectively. Wear resistance was measured by the differences in surface roughness of tested specimens before and after the wear test. A scanning electron microscope was used to assess nanoparticle specifications and distributions and for fracture surfaces analysis. ANOVA, Bonferroni's post hoc test, and the Kruskal–Wallis test were applied for data analysis (α = 0.05).

Results

Regarding the flexural and impact strength, there was a statistically remarkable increase for all tested groups compared with the control group, except for the T7 and S7 groups (P value <0.001, effect size = 0.893) and (P value <0.001, effect size = 0.759), respectively. There was a statistically significant improvement in the hardness of all tested groups compared with the control group (P value <0.001, effect size = 0.67) except T3 and S3. Regarding wear, a statistically significant enhancement was noticed in the wear resistance of all tested groups (P value <0.001, effect size = 0.685), except for the T7 and S7 groups.

Conclusion

The flexural strength, impact strength, and wear resistance improved with both concentrations of ZrO₂ and low TiO₂ and SiO₂ concentrations. The hardness increased with both concentrations of ZrO₂ and high TiO₂ and SiO₂ concentrations.

Effects of SiO2 Incorporation on the Flexural Properties of a Denture Base Resin: An In Vitro Study

Objective  The aim of this study was to evaluate the effects of the addition of low-silicon dioxide nanoparticles (nano-SiO ₂ ) on the flexural strength and elastic modulus of polymethyl methacrylate (PMMA) denture base material.

Materials and Methods  A total of 50 rectangular acrylic specimens (65 × 10 × 2.5 mm ³ ) were fabricated from heat-polymerized acrylic resin. In accordance with the amount of nano-SiO ₂ , specimens were divided into the following five groups ( n = 10 per group): a control group with no added SiO ₂ , and four test groups modified with 0.05, 0.25, 0.5, and 1.0 wt% nano-SiO ₂ of acrylic powder. Flexural strength and elastic modulus were measured by using a 3-point bending test with a universal testing machine. A scanning electron microscope was used for fracture surface analyses. Data analyses were conducted through analysis of variance and Tukey’s post hoc test (α = 0.05).

Results  Compared with the control group, flexural strength and modulus of elasticity tended to significantly increase ( p ˂ 0.001) with the incorporation of nano-SiO ₂ . In between the reinforced groups, the flexural strength significantly decreased ( p ˂ 0.001) as the concentrations increased from 0.25 to 1.0%, with the 1.0% group showing the lowest value. Furthermore, the elastic modulus significantly increased ( p ˂ 0.001) at 0.05% followed by 1.0%, 0.25%, 0.5%, and least in control group.

Conclusion  A low nano-SiO ₂ addition increased the flexural strength and elastic modulus of a PMMA denture base resin.

Chemical Characterisation of Silanised Zirconia Nanoparticles and Their Effects on the Properties of PMMA-Zirconia Nanocomposites

Objectives: The objective of this study was to investigate the mechanical properties of high-impact (HI) heat-cured acrylic resin (PMMA) reinforced with silane-treated zirconia nanoparticles. Methods: Forty-five PMMA specimens reinforced with zirconia were fabricated and divided into three groups: Pure HI PMMA (control group), PMMA reinforced with 3 wt.% of non-silanised zirconia nanoparticles and PMMA reinforced with 3 wt.% of silanised zirconia nanoparticles. Silanised and non-silanised zirconia nanoparticles were analysed with Fourier Transform Infrared (FTIR) Spectroscopy. For measuring the flexural modulus and strength, a Zwick universal tester was used, and for surface hardness, a Vickers hardness tester were used. Furthermore, raw materials and fractured surfaces were analysed using Scanning Electron Microscopy (SEM). A one-way ANOVA test followed by a post-hoc Bonferroni test was employed to analyse the data. Results: The results showed that the mean values for flexural strength (83.5 ± 6.2 MPa) and surface hardness (20.1 ± 2.3 kg/mm²) of the group containing 3 wt.% treated zirconia increased significantly (p < 0.05) in comparison to the specimens in the group containing non-treated zirconia (59.9 ± 7.1 MPa; 15.0 ± 0.2 kg/mm²) and the control group (72.4 ± 8.6 MPa; 17.1 ± 0.9 kg/mm²). However, the group with silanised zirconia showed an increase in flexural modulus (2313 ± 161 MPa) but was not significantly different (p > 0.05) from the non-silanised group (2207 ± 252 MPa) and the control group (1971 ± 235 MPa). Conclusion: Silane-treated zirconia nano-filler improves the surface hardness and flexural strength of HI PMMA-zirconia nanocomposites, giving a potentially longer service life of the denture base.

Antifungal Efficacy and Physical Properties of Poly(methylmethacrylate) Denture Base Material Reinforced with SiO2 Nanoparticles

PURPOSE

To evaluate the effect of the addition of low concentration of silicon-dioxide nanoparticles (nano-SiO₂ ) to poly(methylmethacrylate) (PMMA) denture base material on Candida albicans adhesion, surface roughness, contact angle, hardness, and translucency.

MATERIALS AND METHODS

A total of 150 acrylic disks were fabricated from heat-polymerized acrylic resin and specimens were divided into 3 groups of 50 per test. They were further subdivided into 5 subgroups (n = 10) according to the concentration of nano-SiO₂ : control (no addition) and four tested groups modified with 0.05, 0.25, 0.5, and 1.0 wt% nano-SiO₂ of acrylic powder. Slide count and direct culture methods were used to measure C. albicans count (CFU/mL). The surface roughness values (R_a ; μm) were determined using a profilometer. The contact angle (^o ) measurement was performed by a goniometer using the sessile drop method. Vickers hardness was used to analyze surface hardness. Translucency was measured using a spectrophotometer. Data analysis was conducted through analysis of variance and Tukey's post hoc tests (α = 0.05).

RESULTS

Compared to the control group, direct culture and slide count methods illustrated a significant decrease in C. albicans count (p ˂ 0.001) with the addition of nano-SiO₂ , and this decrease was correlated with the concentration of nano-SiO₂ . The addition of nano-SiO₂ significantly decreased the contact angle (p ˂ 0.001), whereas hardness and surface roughness significantly increased (p ˂ 0.001). The addition of nano-SiO₂ significantly decreased translucency (p ˂ 0.001), and this decrease was concentration dependent.

CONCLUSION

Addition of low concentration of nano-SiO₂ decreased C. albicans adhesion to PMMA denture base resin. Also, low additions of nano-SiO₂ have positive effects on contact angle and hardness, whereas surface roughness and translucency were adversely affected at high concentrations.

Influence of Addition of Different Nanoparticles on the Surface Properties of Poly(methylmethacrylate) Denture Base Material

PURPOSE

To evaluate and compare the surface properties (roughness and hardness) of poly(methylmethacrylate) denture base material modified with zirconium dioxide (ZNPs), silicon dioxide (SNPs), and diamond (DNPs) nanoparticles.

MATERIALS AND METHODS

Two hundred sixty heat-polymerized acrylic resin disks (15 × 2 mm) were prepared. ZNPs, SNPs, and DNPs were added in concentrations of 0%, 0.5%, 1.0%, 2.5%, and 5.0% by weight of acrylic powder. This yielded a total of 13 groups for each test according to filler type and concentration (n = 10/group). The control group was made of pure acrylic. A mechanical polisher was used to standardize specimens' surfaces before testing. A profilometer and Vickers hardness indenter were used to test the surface roughness and hardness, respectively. ANOVA and Tukey post hoc tests were used for data analysis (α = 0.05).

RESULTS

In comparison to control, results showed a nonsignificant increase in surface roughness (R_a ) of acrylic material after the addition of 0.5% nanoparticles (ZNPs p = 0.168, SNPs p = 0.166, and DNPs p = 0.177), while a significant increase was seen with all other concentrations (p ˂ 0.05). R_a values of ZNP and DNP groups were significantly higher than those of the SNPs group (p < 0.001). The addition of any of the fillers to acrylic denture base materials significantly increased the hardness (p ˂ 0.05), with ZNPs and DNPs having values lower than those of the SNPs group (p < 0.001).

CONCLUSIONS

Although nanofiller addition increased the hardness of denture base material, R_a was adversely affected when the concentration exceeded 0.5%. Therefore, 0.5% is suggested to be the most appropriate ratio to improve hardness with acceptable R_a .

Effect of SiO2 Nanoparticles Addition on the Flexural Strength of Repaired Acrylic Denture Base

Objective  The objective of this study was to evaluate the effect of nano-SiO ₂ addition on the flexural strength (FS) of repaired acrylic denture base.

Materials and Methods  Heat-polymerized acrylic resin specimens were fabricated in dimensions of (65 × 10 × 2.5 ± 0.1 mm ³ ) and then sectioned and prepared, creating repair gap with butt (90 degrees) and bevel (45 degrees) repair surface designs forming two main groups according to joint design. Further subdivision was done into four groups ( n = 10) according to nano-SiO ₂ concentration: one unmodified group and three modified groups (0.25, 0.5, and 0.75 wt %) in the autopolymerized repair resin. Each pair of a specimen was assembled in a mold and repaired according to manufacturer’s recommendations.

Statistical Analysis  Three-point bending test was done to measure FS, followed by scanning electron microscope (SEM) examination for fracture surface analysis. Data were analyzed using ANOVA and Tukey’s post hoc test (α = 0.05).

Results  The addition of nano-SiO ₂ significantly improved FS of repaired acrylic resin in comparison to the unmodified group ( p ˂ 0.05). For butt joint, significant differences between nano-SiO ₂ reinforced groups were noticed ( p ˂ 0.05), while reinforced beveled groups did not differ significantly ( p ˃ 0.05). Bevel design remarkably increased FS compared with butt design per respective filler concentration. From the SEM images, improved FS was presented with a homogeneous distribution of nano-SiO ₂ within polymethyl methacrylate.

Conclusion  Nano-SiO ₂ addition to repair resin and 45 degree-beveled repair surface increased FS of repaired acrylic resin.

Comparative Effect of Glass Fiber and Nano-Filler Addition on Denture Repair Strength

PURPOSE

To evaluate and compare the effects of glass fiber (GF), Zirconium oxide nanoparticles (nano-ZrO₂ ), and silicon dioxide nanoparticles (nano-SiO₂ ) addition on the flexural strength and impact strength of repaired denture base material.

MATERIALS AND METHODS

Heat-polymerized acrylic resin specimens were fabricated. All specimens were sectioned centrally and beveled creating 2.5 mm repair gap except for 10 controls. Specimen grouping (n = 10/group) was done according to filler concentration of 0%, 0.25%, 0.5%, and 0.75% of auto-polymerized acrylic powder. Modified resin was mixed, packed in the repair gap, polymerized, finished and polished. Three-point bending test and Charpy type impact testing were done. Data were analyzed using one-way-ANOVA and Post-Hoc Tukey test (α = 0.05).

RESULTS

All additives significantly increased flexural strength and impact strength (p < 0.05). Within the modified subgroups, no significant differences were found for GF. Significant increase for nano-ZrO₂ and significant decrease for nano-SiO₂ as the concentration of additive increased were noted for both flexural strength and impact strength. Highest flexural strength was found with 0.75%-nano-ZrO₂ (69.59 ± 2.52MPa) and the lowest was found with 0.75%-nano-SiO₂ (53.82 ± 3.10MPa). The 0.25%-nano-SiO₂ showed the highest impact strength value (2.54 ± 0.21 kJ/m² ) while the lowest impact strength value was seen with 0.75%-nano-SiO₂ (1.54 ± 0.17 kJ/m² ).

CONCLUSION

Nano-filler effect was concentration dependent and its addition to repair resin increased the flexural and impact strengths. The incorporation of 0.75%-ZrO₂ or 0.25%-SiO₂ into repair resin proved to be a promising technique to enhance repair strength and avoid repeated fractures.

Evaluation of Flexural Strength of Different Denture Base Materials Reinforced with Different Nanoparticles

PURPOSE

To evaluate the effect of adding Al₂ O₃ , SiO₂ , and TiO₂ nanoparticles in ratios of 1, 3, and 5 wt% to different acrylic resins on flexural strength.

MATERIALS AND METHODS

A total of 210 specimens were prepared in 30 groups (n = 7/group) (Control, 1% Al₂ O₃ , 3% Al₂ O₃ , 5% Al₂ O₃ , 1% SiO₂ , 3% SiO₂ , 5% SiO₂ , 1% TiO₂ , 3% TiO₂ , 5% TiO₂ ). The specimens were polished with 200-, 400-, and 600-grit abrasive paper to provide a standard surface before testing and then suspended in distilled water for 30 days. Flexural strength was measured via three-point bending tests. Subsequently, SEM analysis was performed for one specimen from each group. Homogeneity of data was assessed by Kolmogov-Smirnov test followed by two-way ANOVA and Tukey HSD tests (α = 0.05).

RESULTS

There was a significant increase in the flexural strength of polymethylmethacrylate (PMMA) after addition of 1% nanoparticles in both heat-polymerized and autopolymerized acrylic resins (p ˂ 0.05). The flexural strength values of the groups to which Al₂ O₃ and TiO₂ nanoparticles were added exceeded those of the group with SiO₂ addition (p ˂ 0.05). The electron microscopy images revealed that the nanoparticles were more homogeneously dispersed in PMMA with higher flexural strength.

CONCLUSIONS

The mechanical properties of PMMA can be improved by the addition of nanoparticles to PMMA; however, the flexural strength values of PMMA decrease with the addition of nanoparticles at higher percentages (3-5%). Hence, the ideal filler ratio corresponds to 1%.

PMMA denture base material enhancement: a review of fiber, filler, and nanofiller addition

This paper reviews acrylic denture base resin enhancement during the past few decades. Specific attention is given to the effect of fiber, filler, and nanofiller addition on poly(methyl methacrylate) (PMMA) properties. The review is based on scientific reviews, papers, and abstracts, as well as studies concerning the effect of additives, fibers, fillers, and reinforcement materials on PMMA, published between 1974 and 2016. Many studies have reported improvement of PMMA denture base material with the addition of fillers, fibers, nanofiller, and hybrid reinforcement. However, most of the studies were limited to in vitro investigations without bioactivity and clinical implications. Considering the findings of the review, there is no ideal denture base material, but the properties of PMMA could be improved with some modifications, especially with silanized nanoparticle addition and a hybrid reinforcement system.

The Effect of Silica and Prepolymer Nanoparticles on the Mechanical Properties of Denture Base Acrylic Resin

PURPOSE

To evaluate how hydrophobic nanoparticle silica and prepolymer affect the flexural strength, surface hardness, surface roughness, and resilience of a denture base acrylic resin.

MATERIALS AND METHODS

A total of 40 denture base acrylic resin specimens with dimensions 65 × 10 × 3 mm³ were fabricated in this study. Specimens were divided into five experimental groups (n = 8) according to surface-treated silica and prepolymer concentration incorporated into the acrylic resin (weight %) prior to polymerization: G1 acted as control, no fillers were used in this group. G2: 1 wt% 12 nm silica nanoparticles; G3: 5 wt% 12 nm silica nanoparticles; G4: 1 wt% 12 nm prepolymer nanoparticles; G5: 5 wt% 12 nm prepolymer nanoparticles were added into the acrylic mixture. Acrylic specimens were polymerized according to the manufacturer's instructions. Three-point bending test was performed to evaluate the flexural strength and the resilience of the specimens. Then, a digital profilometer was used to determine the surface roughness of the specimens. Surface hardness was conducted by a digital Shore D hardness testing machine. Surface analysis of one specimen in each group was performed with a scanning electron microscopy (SEM) to observe the fracture surfaces of specimens. ANOVA and Tukey tests were used for the statistical analysis (p < 0.05).

RESULTS

Statistical analysis revealed significant differences among the groups. All groups showed poor flexural strength as compared with the control (p < 0.05). Regarding resilience, silica 5% showed the highest value whereas silica 1% showed the lowest value. Regarding Shore D hardness, silica 1% had the lowest hardness whereas polymer addition did not significantly influence the hardness of the acrylic resin (p < 0.05). Furthermore, silica 1% presented the highest roughness as compared with the other groups (p < 0.05). SEM images indicated some porosity and voids on fracture surfaces.

CONCLUSIONS

Both the silica and prepolymer incorporation into acrylic resin adversely affected the flexural strength of the acrylic resin compared to control group. In all concentrations, prepolymer incorporation resulted in increased flexural strength of acrylic resins compared to silica addition. The greater concentrations of the fillers resulted in increased mechanical properties of the acrylic resin.

Effect of nanoscale particles incorporation on microhardness of polymers for oral prosthesis

Objectives:

This study aimed to evaluate the influence of the incorporation of pigments on surface hardness of four acrylic resins subjected to thermocycling and analyze their elemental composition using energy dispersive X-ray spectroscopy (EDS).

Materials and Methods:

Twenty-one discs of each resin were fabricated, whereas seven had no additive, seven had 3% of nanoscale pigments and last seven had 10% of them. The percentage was obtained by measuring the total weight of each resin disc. Besides, seven discs composed by only nanoscale pigments were also fabricated, totalizing 91 discs. The pigment was weighed by using an analytical balance (BEL Analytical Equipment, SP, Brazil). The surface hardness was measured through a hardness tester machine before and after thermocycling (5–55°C, for 2000 cycles). Data were analyzed by ANOVA and Tukey's test (P < 0.05). The chemical composition of the discs composed only by nanoscale pigments was analyzed with EDS test.

Results:

Hardness of all resins decreased after thermocycling. The lowest values were observed on the discs with 3% of nanoscale pigments and discs fabricated only with them. EDS showed the presence of titanium dioxide.

Conclusion:

Discs with 7% of pigments (after thermocycling) showed higher hardness values.