Metal Doping of Strongly Confined Halide Perovskite Nanocrystals under Ambient Conditions

Halide perovskite nanocrystals are promising materials for optoelectronic applications. Metal doping provides an avenue to boost their performance further, e.g., by enhancing light emission, or to provide additional functionalities, such as nanoscale magnetism and polarization control. However, the synthesis of widely size-tunable nanocrystals with controlled doping levels has been inaccessible using traditional hot injection synthesis, preventing systematic studies on dopant effects toward device applications. Here, we report a versatile synthesis method for metal-doped perovskite nanocrystals with precise control over size and doping concentration under ambient conditions. Our room temperature approach results in fully size-tunable isovalent doping of CsPbX3 nanocrystals (X = Cl, Br, I) with various transition metals M2+ tested (M = Mn, Ni, Zn). This gives for the first time access to small, yet precisely doped quantum dots beyond the weak confinement regime reported so far. It also enables a comparative study of the photophysics across multiple size and dopant regimes, where we show dopant-induced localization to dominate over quantum confinement effects. This generalizable, facile synthesis method thus provides a toolbox for engineering perovskite nanocrystals toward light-emitting technologies under industrially relevant conditions.

Photocatalytic Hydrogen Production Using Semiconductor (CdSe)13 Clusters

Atomically precise (CdSe)13 clusters, the smallest CdSe semiconductors, represent a unique class of materials at the boundary between nanocrystals and molecules. Despite their promising potential, low structural stability limits their applications as photocatalysts. Herein, we report photocatalytic hydrogen production using atomically precise (CdSe)13 clusters. To improve stability in aqueous environments, we induce self-assembly into suprastructures, making them suitable for water splitting. Our findings demonstrate that Co2+ doping enhances the electrical properties of these clusters, while bipyridine serves as cocatalyst by interacting with Co2+ dopants and providing catalytic active sites. Through the synergistic effects of Co2+ doping and bipyridine, Co2+-doped (CdSe)13 suprastructures achieve promising hydrogen evolution activity, surpassing those of undoped suprastructures or nanoclusters. Theoretical calculations confirm that Co2+ doping and bipyridine incorporation lower the hydrogen adsorption energy, consistent with the experimental results. These results highlight the potential of semiconductor (CdSe)13 clusters as photocatalysts for sustainable hydrogen production.

Tailoring Substitutional Sites for Efficient Lanthanide Doping in Lead-Free Perovskite Nanocrystals with Enhanced Near-Infrared Photoluminescence

The incorporation of rare earth lanthanide ions (Ln3+) into lead-free halide perovskite nanocrystals (NCs) is an effective and promising strategy to expand their optical, magnetic, and electrochemical properties. Herein, we designed and synthesized various Ln3+ (including Yb3+, Er3+, and Nd3+), doped Sb3+- or Bi3+-based and Sb3+/Bi3+ alloyed lead-free perovskite NCs, including vacancy-induced perovskite (A3B(III)2X9), double perovskite (A2B(I)B (III)X6), and layered-double perovskite (A4B(II)B(III)2X12) NCs with different energy transfer pathways to study the Ln3+ dopant photoluminescence (PL). While a small size mismatch between dopant ions and host substitutional sites are critical for efficient doping of many first-row transitional metal ion doped metal chalcogenides, surprisingly, the Ln3+ ions, including the large Nd3+ ions (112 pm), prefer smaller isovalent Sb(III) octahedral (Oh) sites (90 pm) instead of Bi(III) Oh sites (117 pm) in these lead-free perovskite NCs. Significantly, similar substitutional site-dependent Ln3+ doping efficiencies were obtained across all three different perovskite host lattices, despite differences in host-to-dopant energy transfer mechanisms, which can provide strong evidence of the preferred Sb3+ substitutional sites for lanthanide dopants in these lead-free perovskite lattices. The efficient Ln3+ doping in Sb3+-rich perovskite NCs leads to enhanced Ln3+ ion PL of the doped NCs. The preference of smaller Sb (III) over Bi(III) substitutional sites for Ln3+ dopants is attributed to the relatively high polarizabilities of lanthanide ions and the smaller cationic sites inside [SbX6]3- compared with [BiX6]3- octahedra. This study provides a fundamental understanding of Ln3+ doping behavior in lead-free perovskite NCs and opportunities for designing efficient Ln3+-doped functional materials by tuning the microenvironment of the host lattice for enhanced properties.

Strong Coupling between Mn2+ Dopants and CdSe Nanoplatelets Enables Charge-Transfer Transition and Dual Emission

Doping transitional metals into colloidal nanocrystals can significantly modify their excited-state dynamics and enrich their optical and magneto-optical functionalities. Here we synthesize Mn-doped CdSe nanoplatelets and investigate their excited-state dynamics and light-emission mechanisms. Extensive characterizations suggest that Mn2+ ions are situated near the surface-region of the nanoplatelets. The atomic thinness of nanoplatelets allows for a strong host-dopant coupling, manifested as broadband charge-transfer absorption and emission (near 575 nm) between the host valence band and the dopant d-orbitals. Photoexcitation of the host leads to rapid (a few ps) electron transfer from the conduction band to the d-orbitals, and the resultant charge-transfer state decays within a few ns not only through charge-transfer emission but also generating an excited-state species (likely Mn-Mn dimer) with a characteristic near-infrared emission. These novel photophysics and photochemistry uncovered for quasi-two-dimensional Mn-doped nanocrystals form the basis for optical, magneto-optical, and energy conversion applications using such materials.

An Atomically Dispersed Mn Photocatalyst for Vicinal Dichlorination of Nonactivated Alkenes

A novel Mn-based single-atom photocatalyst is disclosed in this study, designed for the dichlorination of alkenes to achieve vicinal dichlorinated products using N-chlorosuccinimide as a mild chlorinating agent, which have widespread applications as pest controlling agents, polymers, flame retardants, and pharmaceuticals. In developing this innovative catalyst, we achieved the atomic dispersion of Mn on aryl-amino-substituted graphitic carbon nitride (f-C3N4). This marks the first instance of a heterogeneous version, offering an operationally simple, sustainable, and efficient pathway for dichlorination of alkenes, including drugs, bioactive compounds, and natural products. This material was extensively characterized by using techniques such as UV-vis spectroscopy, X-ray absorption near-edge structure (XANES), extended X-ray absorption fine structure (EXAFS), high-resolution transmission electron microscopy (HR-TEM), X-ray photoelectron spectroscopy (XPS), magic-angle spinning (MAS), and solid-state nuclear magnetic resonance (ssNMR) spectroscopy to understand it at the atomic level. Furthermore, mechanistic studies based on multiscale molecular modeling, combining classical reactive molecular dynamics (RMD) simulations and quantum chemistry (QC) calculations, illustrated that the controlled formation of Cl radicals from the in situ formed Mn-Cl bond is responsible for the dichlorination reaction of alkenes. In addition, gram-scale and reusability tests were also performed to demonstrate the applicability of this approach on an industrial scale.

In situ n-doped nanocrystalline electron-injection-layer for general-lighting quantum-dot LEDs

Quantum-dot optoelectronics, pivotal for lighting, lasing and photovoltaics, rely on nanocrystalline oxide electron-injection layer. Here, we discover that the prevalent surface magnesium-modified zinc oxide electron-injection layer possesses poor n-type attributes, leading to the suboptimal and encapsulation-resin-sensitive performance of quantum-dot light-emitting diodes. A heavily n-doped nanocrystalline electron-injection layer-exhibiting ohmic transport with 1000 times higher electron conductivity and improved hole blockage-is developed via a simple reductive treatment. The resulting sub-bandgap-driven quantum-dot light-emitting diodes exhibit optimal efficiency and extraordinarily-high brightness, surpassing current benchmarks by at least 2.6-fold, and reaching levels suitable for quantum-dot laser diodes with only modest bias. This breakthrough further empowers white-lighting quantum-dot light-emitting diodes to exceed the 2035 U.S. Department of Energy's targets for general lighting, which currently accounts for ~15% of global electricity consumption. Our work opens a door for understanding and optimizing carrier transport in nanocrystalline semiconductors shared by various types of solution-processed optoelectronic devices.

Pressure-Modulated Energy Transfer Dynamics in Mn2+-Doped CdS/ZnS Core/Shell Quantum Dots

Transition metal doping in semiconductor quantum dots (QDs) significantly impacts their optical properties, thus expanding the range of their potential optoelectronic applications. This study investigates the pressure-dependent energy transfer dynamics in Mn2+-doped CdS/ZnS core/shell QDs, focusing on how external hydrostatic pressure modulates these dynamics and optical properties. By synthesizing Mn2+-doped QDs with varying Mn2+ doping concentrations, we explore the effects of the pressure on photoluminescence (PL) spectra and energy transfer efficiency. Our study reveals that increasing pressure induces a blueshift in the QD host bandgap PL and a redshift in the Mn2+ dopant PL. The pressure-induced shifts highlight a unique modulation mechanism where the energy transfer efficiency decreases with pressure due to reduced wave function overlap between host excitons and Mn2+ dopants. Detailed analysis of the PL quantum yields and energy transfer rate constants provides insights into these dynamics, suggesting that the pressure can effectively and reversibly regulate the energy transfer efficiencies and rates. These results have implications for developing pressure-sensitive configurable devices and exploring pressure-induced phenomena in doped nanomaterials.

Phonon Involved Photoluminescence of Mn2+ Ions Doped CsPbCl3 Micro-Size Perovskite Assembled Crystals

Mn2+ ions doped CsPbCl3 perovskite nanocrystals (NCs) exhibit superiority of spin-associated optical and electrical properties. However, precisely controlling the doping concentration, doping location, and the mono-distribution of Mn2+ ions in the large-micro-size CsPbCl3 perovskite host is a formidable challenge. Here, the micro size CsPbCl3 perovskite crystals (MCs) are reported with uniform Mn2+ ions doping by self-assembly of Mn2+ ions doped CsPbCl3 perovskite NCs. The electron-phonon coupling strength is enhanced in the perovskite self-assembled CsPbCl3 MCs, which remarkably accelerates the PL decay of Mn2+ ions in room temperature. Furthermore, the phonon-involved PL emission splits to two peaks at low temperature of 80 K, due to the phonon emission and absorption-induced energy exchange for exciton recombination in Mn2+ ions. These findings not only demonstrate a novel material system but also introduce a new theoretical framework for phonon-modulated PL manipulation in Mn2+-doped perovskite materials.

Optical signatures of lattice strain in chemically doped colloidal quantum wells

Lattice strain plays a vital role in tailoring the optoelectronic performance of colloidal nanocrystals (NCs) with exotic geometries. Although optical identifications of lattice strain in irregular-shaped NCs or hetero-structured NCs have been well documented, less is known about optical signatures of the sparsely distributed lattice mismatch in chemically-doped NCs. Here, we show that coherent acoustic phonons (CAPs) following bandgap optical excitations in Cu-doped CdSe colloidal quantum wells (CQWs) offer a unique platform for indirectly measuring the dopant-induced lattice strain. By comparing the behavior of CAPs in Cu-doped and undoped CQWs (i.e., vibrational phase/lifetime/amplitude), we have revealed the driving force of CAPs related to the optical screening of lattice strain-induced piezoelectric fields, which thus allows to determine the strain-induced piezoelectric field of ~102 V/m in Cu-doped CdSe CQWs. This work may facilitate a detailed understanding of lattice strain in chemically-doped colloidal NCs, which is a prerequisite for the design of favorable doped colloids in optoelectronics.

Data-Driven Machine Learning Strategy for Designing Metal-Ion-Doped γ-Bi2MoO6 Photocatalysts to Enhance Degradation Performance

Doped semiconductors are often used to improve photocatalytic efficiency and address the challenges of easy recombination of electron-hole pairs and poor photoluminescence. However, the reproducibility and complexity of experimental studies result in time-consuming and less cost-effective studies, and it is difficult to gain insights into the intrinsic properties of doped photocatalysts to control their performance. Introducing a machine learning approach, we constructed a photocatalytic model of transition-metal- and rare earth metal-ion-doped γ-Bi2MoO6. We selected 18 factors of preparation conditions and dopant ion properties, and constructed 806 data sets through literature collection for correlation analysis, paving the way for a more efficient and cost-effective research process. The results of our study are promising. The trained and improved XGboost model demonstrated high resistance to the variability caused by data segmentation, with a cross-validated model showing a coefficient of determination of 0.942. Through the combination of characteristic importance and Shapley additive explanation analysis, the importance and correlation trends of preparation conditions and dopant ion properties are obtained, especially the positive correlation trend of excitation time and preparation time and the negative correlation trend of atomic mass and bandwidth. Model prediction and experimental validation are used to demonstrate the effectiveness and behavioral prediction ability, and the Zn and Cd elements are successfully predicted for doping modification means. This study contributes to the modification and preparation of γ-Bi2MoO6 materials and provides a solid foundation for the efficient design of photocatalysts.

Laser-assisted synthesis and modification of 2D materials

Two-dimensional (2D) materials with unique physical, electronic, and optical properties have been intensively studied to be utilized for the next-generation electronic and optical devices, and the use of laser energy in the synthesis and modification of 2D materials is advantageous due to its convenient and fast fabrication processes as well as selective, controllable, and cost-effective characteristics allowing the precise control in materials properties. This paper summarizes the recent progress in utilizations of laser technology in synthesizing, doping, etching, transfer and strain engineering of 2D materials, which is expected to provide an insight for the future applications across diverse research areas.

Cluster-doping in silicon nanocrystals

Creating tin-alloyed silicon nanocrystals with tailored bandgap values is a significant challenge, primarily because a substantial concentration of tin is essential to observe useful changes in the electronic structure. However, high concentration of Sn leads to instability of the silicon-tin nanocrystals. This work introduces a completely new approach to doping and the modification of the electronic structure of nanoparticles by incorporating few-atom clusters in nanocrystals, deviating from isolated atom doping or attempting alloying. This approach is exemplified via a combined theoretical and experimental study on tin (Sn) 'cluster-doping' of silicon (Si) nanocrystals, motivated by the opportunities offered by the Si-Sn system with tailored band energy. First-principles modelling predicts two noteworthy outcomes: a considerably smaller bandgap of these nanocrystals even with a modest concentration of tin compared to an equivalent-sized pure silicon nanocrystal and an unexpected decrease in the bandgap of nanocrystals as the diameter of nanocrystals increases, contrary to the typical quantum confined behaviour. Experimental verification using atmospheric pressure microplasma synthesis confirms the stability of these nanocrystals under ambient conditions. The plasma-synthesised nanocrystals exhibited the predicted atypical size-dependent behaviour of the bandgap, which ranged from 1.6 eV for 1.4 nm mean diameter particles to 2.4 eV for 2.2 nm mean diameter particles.

Controllable p- and n-type behaviours in emissive perovskite semiconductors

Reliable control of the conductivity and its polarity in semiconductors is at the heart of modern electronics1-7, and has led to key inventions including diodes, transistors, solar cells, photodetectors, light-emitting diodes and semiconductor lasers. For archetypal semiconductors such as Si and GaN, positive (p)- and negative (n)-type conductivities are achieved through the doping of electron-accepting and electron-donating elements into the crystal lattices, respectively1-6. For halide perovskites, which are an emerging class of semiconductors, mechanisms for reliably controlling charge conduction behaviours while maintaining high optoelectronic qualities are yet to be discovered. Here we report that the p- and n-type characteristics in a wide-bandgap perovskite semiconductor can be adjusted by incorporating a phosphonic acid molecular dopant with strong electron-withdrawing abilities. The resultant carrier concentrations were more than 1013 cm-3 for the p- and n-type samples, with Hall coefficients ranging from -0.5 m3 C-1 (n-type) to 0.6 m3 C-1 (p-type). A shift of the Fermi level across the bandgap was observed. Importantly, the transition from n- to p-type conductivity was achieved while retaining high photoluminescence quantum yields of 70-85%. The controllable doping in the emissive perovskite semiconductor enabled the demonstration of ultrahigh brightness (more than 1.1 × 106 cd m-2) and exceptional external quantum efficiency (28.4%) in perovskite light-emitting diodes with a simple architecture.

Ultrafast electron shuttling suppresses the energy transfer process in Mn-doped CsPbCl3 nanocrystals

Taking advantage of the slow exciton-to-dopant energy transfer process, we dissociated the exciton in Mn-doped perovskite via ultrafast electron shuttling to a surface adsorbed 4-nitro phenol molecule. The observed ultrafast electron transfer process is competitive to the ultrafast exciton scattering process (∼140 fs) to the continuum states via optical phonons, but three-orders faster than the exciton-to-Mn energy transfer timescale.

Interplay between photoinduced charge and energy transfer in manganese doped perovskite quantum dots

A comprehensive study on the photo-excited relaxation dynamics in semiconducting perovskite quantum dots (PQDs) is pivotal in realizing their extensive potential for optoelectronics applications. Among different competing photoinduced relaxation kinetics, energy transfer and charge transfer (CT) in PQDs need special attention, as they often influence the device efficacy, particularly with the donor-acceptor hybrid architecture. In this work, we explore a detailed investigation into photoinduced CT dynamics in mixed halide undoped CsPb(Br/Cl)3 and Mn2+ doped CsPb(Br/Cl)3 PQDs with a quinone molecule, p-benzoquinone (BQ). The energy level alignment of undoped PQDs with BQ allows an efficient CT, whereas Mn2+ doping reduces the CT efficiency, experiencing a competition between energy transfer from host to dopant and CT to BQ. The conductive atomic force microscopy measurements unveil a direct correlation with the spectroscopic studies by showing a significant improvement in the conductance of undoped PQDs in the presence of BQ, while an inappreciable change is observed for doped PQDs. A much-reduced transition voltage and barrier height in the presence of BQ further validate faster CT for undoped PQD than the doped one. Furthermore, Mn2+ doping in PQDs is observed to enhance their stability, showing better air and thermal stability compared to their undoped counterparts. These results reveal that doping strategy can regulate the CT dynamics in these PQDs and increase their stability, which will be beneficial for the development of desired optoelectronic devices with long-term stability.

Potassium Iodide Doping for Vacancy Substitution and Dangling Bond Repair in InP Core-Shell Quantum Dots

This work highlights the novel approach of incorporating potassium iodide (KI) doping during the synthesis of In0.53P0.47 core quantum dots (QDs) to significantly reduce the concentration of vacancies (i.e., In vacancies; VIn-) within the bulk of the core QD and inhibit the formation of InPOx at the core QD-Zn0.6Se0.4 shell interfaces. The photoluminescence quantum yield (PLQY) of ~97% and full width at half maximum (FWHM) of ~40 nm were achieved for In0.53P0.47/Zn0.6Se0.4/Zn0.6Se0.1S0.3/Zn0.5S0.5 core/multi-shell QDs emitting red light, which is essential for a quantum-dot organic light-emitting diode (QD-OLED) without red, green, and blue crosstalk. KI doping eliminated VIn- in the core QD bulk by forming K+-VIn- substitutes and effectively inhibited the formation of InPO4(H2O)2 at the core QD-Zn0.6Se0.4 shell interface through the passivation of phosphorus (P)-dangling bonds by P-I bonds. The elimination of vacancies in the core QD bulk was evidenced by the decreased relative intensity of non-radiative unpaired electrons, measured by electron spin resonance (ESR). Additionally, the inhibition of InPO4(H2O)2 formation at the core QD and shell interface was confirmed by the absence of the {210} X-ray diffraction (XRD) peak intensity for the core/multi-shell QDs. By finely tuning the doping concentration, the optimal level was achieved, ensuring maximum K-VIn- substitution, minimal K+ and I- interstitials, and maximum P-dangling bond passivation. This resulted in the smallest core QD diameter distribution and maximized optical properties. Consequently, the maximum PLQY (~97%) and minimum FWHM (~40 nm) were observed at 3% KI doping. Furthermore, the color gamut of a QD-OLED display using R-, G-, and B-QD functional color filters (i.e., ~131.1%@NTSC and ~98.2@Rec.2020) provided a nearly perfect color representation, where red-light-emitting KI-doped QDs were applied.

Silver-doped CdSe magic-sized nanocrystals

Magic-sized nanocrystals (MSNCs) grow via jumps between very specific sizes. This discrete growth is a possible avenue toward monodisperse nanomaterials that are completely identical in size and shape. In spite of this potential, MSNCs have seen limited study and application due to their poor optical properties. Specifically, MSNCs are limited in their range of emission wavelengths and commonly exhibit poor photoluminescence quantum yields (PLQYs). Here, we report silver doping of CdSe MSNCs as a strategy to improve the optical properties of MSNCs. Silver doping leads to controllable shifts in emission wavelength and significant increases in MSNC PLQYs. These results suggest that doped MSNCs are interesting candidates for displays or luminescent solar concentrators. Finally, we demonstrate that the doping process does not affect the magic size of our MSNCs, allowing further photophysical study of this class of nanomaterial.

Dedoping of Intraband Silver Selenide Colloidal Quantum Dots through Strong Electronic Coupling at Organic/Inorganic Hybrid Interfaces

Colloidal quantum dot (CQD) infrared (IR) photodetectors can be fabricated and operated with larger spectral tunability, fewer limitations in terms of cooling requirements and substrate lattice matching, and at a potentially lower cost than detectors based on traditional bulk materials. Silver selenide (Ag2Se) has emerged as a promising sustainable alternative to current state-of-the-art toxic semiconductors based on lead, cadmium, and mercury operating in the IR. However, an impeding gap in available absorption bandwidth for Ag2Se CQDs exists in the short-wave infrared (SWIR) region due to degenerate doping by the environment, switching the CQDs from intrinsic interband semiconductors in the near-infrared (NIR) to intraband absorbing CQDs in the mid-wave infrared (MWIR). Herein, we show that the small molecular p-type dopant 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4-TCNQ) can be used to extract electrons from the 1Se state of MWIR active Ag2Se CQDs to activate their intrinsic energy gap in the SWIR window. We demonstrate quenching of the MWIR Ag2Se absorbance peak, shifting of nitrile vibrational peaks characteristic of charge-neutral F4-TCNQ, as well as enhanced CQD absorption around ∼2500 nm after doping both in ambient and under air-free conditions. We elucidate the doping mechanism to be one that involves an integer charge transfer akin to doping in semiconducting polymers. These indications of charge transfer are promising milestones on the path to achieving sustainable SWIR Ag2Se CQD photodetectors.

High conductivity characteristics of phosphorus-doped nanocrystalline silicon thin films by KrF pulsed excimer laser irradiation method

The microstructure and high conductivity properties of phosphorus-doped nanocrystalline silicon films were investigated on samples prepared by a plasma-enhanced chemical vapor deposition technique and the KrF pulsed excimer laser irradiation method. The results of Fourier transform infrared spectroscopy and Raman spectroscopy show that Si nanocrystallites with an average diameter of 2 nm to 3 nm are formed in the film. The degree of crystallinity increases with the increase of laser radiation intensity, while the content of hydrogen decreases gradually. More phosphorus atoms are substitutionally incorporated into the nc-Si dots under higher laser irradiation fluence, which is responsible for the high dark conductivity. By controlling the laser fluence at 1.0 J cm-2, the dark conductivity as high as 25.7 S cm-1 can be obtained. Based on the measurements of temperature-dependent conductivity, the carrier transport processes are discussed. The phosphorus doping and the increase of electron concentration are considered to be the reason for high dark conductivity and extremely low conductivity activation energy.

Resolving Multielement Semiconductor Nanocrystals at the Atomic Level: Complete Deciphering of Domains and Order in Complex CuαZnβSnγSeδ (CZTSe) Tetrapods

Semiconductor nanocrystals (NCs) with high elemental and structural complexity can be engineered to tailor for electronic, photovoltaic, thermoelectric, and battery applications etc. However, this greater complexity causes ambiguity in the atomic structure understanding. This in turn hinders the mechanistic studies of nucleation and growth, the theoretical calculations of functional properties, and the capability to extend functional design across complementary semiconductor nanocrystals. Herein, we successfully deciphered the atomic arrangements of 4 different nanocrystal domains in CuαZnβSnγSeδ (CZTSe) nanocrystals using crucial zone axis analysis on multiple crystals in different orientations. The results show that the essence of crystallographic progression from binary to multielemental semiconductors is actually the change of theoretical periodicity. This transition is caused by decreased symmetry in the crystal instead of previously assumed crystal deformation. We further reveal that these highly complex crystalline entities have highly ordered element arrangements as opposed to the previous understanding that their elemental orderings are random.

Controlled Sequential Doping of Metal Nanocluster

Atomically precise doping of metal nanoclusters provides excellent opportunities not only for subtly tailoring their properties but also for in-depth understanding of composition (structure)-property correlation of metal nanoclusters and has attracted increasing interest partly due to its significance for fundamental research and practical applications. Although single and multiple metal atom doping of metal nanoclusters (NCs) has been achieved, sequential single-to-multiple metal atom doping is still a big challenge and has not yet been reported. Herein, by introducing a second ligand, a novel multistep synthesis method was developed, controlled sequential single-to-multiple metal atom doping was successfully achieved for the first time, and three doped NCs Au25Cd1(p-MBT)17(PPh3)2, Au18Cd2(p-MBT)14(PPh3)2, and [Au19Cd3(p-MBT)18]- (p-MBTH: para-methylbenzenethiol) were obtained, including two novel NCs that were precisely characterized via mass spectrometry, single-crystal X-ray crystallography, and so forth. Furthermore, sequential doping-induced evolutions in the atomic and crystallographic structures and optical and catalytic properties of NCs were revealed.

Bright Blue Emission Lead-Free Halides with Narrow Bandwidth Enabled by Oversaturated Europium Doping

Eu2+-based lead-free metal halide nanocrystals (LFMH NCs), including CsEuCl3 NCs and CsX:Eu2+ NCs (X = Cl or Br), exhibit highly efficient narrow-band blue photoluminescence, making them competitive candidates for next-generation lighting and displays. However, the growing mechanism of the aforementioned NCs lacks in-depth study, which hinders the development of Eu2+-based nanomaterials. Herein, we demonstrate the colloidal synthesis of CsBr:Eu2+ NCs based on an air-stable europium source. The NCs show deep blue photoluminescence centered at 444 nm, with a maximum photoluminescence quantum yield (PLQY) reaching 53.4% and a fwhm of 30 nm. We further reveal the mechanism that determines CsBr host growth and Eu2+ doping in CsBr:Eu2+ nanocrystals, especially dopant trapping and self-purification, that determine the PLQY level. Pure white, warm white, and cold white LEDs are fabricated based on CsBr:Eu2+ NCs, red and green phosphors, and their performance suits the needs of high-quality lighting.

Generating Long-Lived Charge Carriers in CdS Quantum Dots by Cu-Doping for Photocatalytic CO2 Reduction

Converting CO2 into high-value-added chemicals has been recognized as a promising way to tackle the fossil fuel crisis. Quantum dots (QDs) have been extensively studied for photocatalytic CO2 reduction due to their excellent optoelectronic properties. However, most of the photogenerated charge carriers recombine before they participate in the photocatalytic reaction. It is crucial to regulate the charge carriers to minimize undesired charge recombination, thus, promoting surface photocatalysis. Herein, we report a copper-doped CdS (Cu:CdS) QD photocatalyst for CO2 reduction. Density functional theory simulations and experimental results demonstrate that Cu dopants create intermediate energy levels in CdS QDs that can extend the lifetime of exciton charge carriers. Furthermore, the long-lived charge carriers can be harnessed for the photocatalytic reaction on Cu:CdS QDs. The resultant Cu:CdS QDs exhibited a significantly enhanced photocatalytic activity toward CO2 reduction compared to the pristine CdS QDs. This work highlights the importance of charge regulation in photocatalysts and opens new pathways for the exploration of efficient QD photocatalysts.

Entropy-Driven Strongly Confined Low-Toxicity Pure-Red Perovskite Quantum Dots for Spectrally Stable Light-Emitting Diodes

Spectrally stable pure-red perovskite quantum dots (QDs) with low lead content are essential for high-definition displays but are difficult to synthesize due to QD self-purification. Here, we make use of entropy-driven quantum-confined pure-red perovskite QDs to fabricate light-emitting diodes (LEDs) that have low toxicity and are efficient and spectrum-stable. Based on experimental data and first-principles calculations, multiple element alloying results in a 60% reduction in lead content while improving QD entropy to promote crystal stability. Entropy-driven QDs exhibit photoluminescence with 100% quantum yields and single-exponential decay lifetimes without alteration of their morphology or crystal structure. The pure-red LEDs utilizing entropy-driven QDs have spectrally stable electroluminescence, achieving a brightness of 4932 cd/m2, a maximum external quantum efficiency of over 20%, and a 15-fold longer operational lifetime than the CsPbI3 QD-based LEDs. These achievements demonstrate that entropy-driven QDs can mitigate local compositional heterogeneity and ion migration.

Exciton-to-Dopant Energy Transfer Dynamics in Mn2+ Doped CsPbBr3 Nanowires Synthesized by Diffusion Doping

Mn2+ doped perovskite nanocrystals have garnered significant attention in optoelectronic applications. However, the synthesis of Mn2+ doped perovskite nanowires (NWs) poses challenges, and the dynamics of energy transfer from the exciton to Mn2+ remains unexplored, which is crucial for optimizing Mn2+ luminescence efficiency. Herein, we present a method to synthesize Mn2+ doped CsPbBr3 NWs with a photoluminescence quantum yield of 52% by diffusing Mn2+ into seed CsPbBr3 NWs grown via a hot injection method. We control the solution and lattice chemical potentials of Pb2+ and Mn2+ to enable Mn2+ to diffuse into the CsPbBr3 NWs while minimizing Ostwald ripening. Variable temperature photoluminescence spectroscopy reveals that the energy transfer from the exciton to Mn2+ in Mn2+ doped CsPbBr3 NWs is temperature dependent. A dynamic competition is observed between energy transfer and backward energy transfer, resulting in stronger Mn2+ photoluminescence at 80 K. This work provides a specific synthesis pathway for Mn2+ doped CsPbBr3 NWs and sheds light on their exciton-to-Mn2+ energy transfer dynamics.

Inserting an "atomic trap" for directional dopant migration in core/multi-shell quantum dots

Diffusion of atoms or ions in solid crystalline lattice is crucial in many areas of solid-state technology. However, controlling ion diffusion and migration is challenging in nanoscale lattices. In this work, we intentionally insert a CdZnS alloyed interface layer, with small cationic size mismatch with Mn(ii) dopant ions, as an "atomic trap" to facilitate directional (outward and inward) dopant migration inside core/multi-shell quantum dots (QDs) to reduce the strain from the larger cationic mismatch between dopants and host sites. Furthermore, it was found that the initial doping site/environment is critical for efficient dopant trapping and migration. Specifically, a larger Cd(ii) substitutional site (92 pm) for the Mn(ii) dopant (80 pm), with larger local lattice distortion, allows for efficient atomic trapping and dopant migration; while Mn(ii) dopant ions can be very stable with no significant migration when occupying a smaller Zn(ii) substitutional site (74 pm). Density functional theory calculations revealed a higher energy barrier for a Mn(ii) dopant hopping from the smaller Zn substitutional tetrahedral (Td) site as compared to a larger Cd substitutional Td site. The controlled dopant migration by "atomic trapping" inside QDs provides a new way to fine tune the properties of doped nanomaterials.

One-pot synthesis of Ag-In-Ga-S nanocrystals embedded in a Ga2O3 matrix and enhancement of band-edge emission by Na+ doping

I-III-VI-based semiconductor quantum dots (QDs) have been intensively explored because of their unique controllable optoelectronic properties. Here we report one-pot synthesis of Na-doped Ag-In-Ga-S (AIGS) QDs incorporated in a Ga2O3 matrix. The obtained QDs showed a sharp band-edge photoluminescence peak at 557 nm without a broad-defect site emission. The PL quantum yield (QY) of such QDs was 58%, being much higher than that of AIGS QDs without Na+ doping, 29%. The obtained Na-doped AIGS/Ga2O3 composite particles were used as an emitting layer of green QD light-emitted diodes. A sharp electroluminescence (EL) peak was observed at 563 nm, being similar to that in the PL spectrum of the QDs used. The external quantum efficiency of the device was 0.6%.

Spotlight on Luminescence Thermometry: Basics, Challenges, and Cutting-Edge Applications

Luminescence (nano)thermometry is a remote sensing technique that relies on the temperature dependency of the luminescence features (e.g., bandshape, peak energy or intensity, and excited state lifetimes and risetimes) of a phosphor to measure temperature. This technique provides precise thermal readouts with superior spatial resolution in short acquisition times. Although luminescence thermometry is just starting to become a more mature subject, it exhibits enormous potential in several areas, e.g., optoelectronics, photonics, micro- and nanofluidics, and nanomedicine. This work reviews the latest trends in the field, including the establishment of a comprehensive theoretical background and standardized practices. The reliability, repeatability, and reproducibility of the technique are also discussed, along with the use of multiparametric analysis and artificial-intelligence algorithms to enhance thermal readouts. In addition, examples are provided to underscore the challenges that luminescence thermometry faces, alongside the need for a continuous search and design of new materials, experimental techniques, and analysis procedures to improve the competitiveness, accessibility, and popularity of the technology.

Heterogeneity in Cation Exchange Ag+ Doping of CdSe Nanocrystals

Cation exchange is becoming extensively used for nanocrystal (NC) doping in order to produce NCs with unique optical and electronic properties. However, despite its ever-increasing use, the relationships between the cation exchange process, its doped NC products, and the resulting NC photophysics are not well characterized. For example, similar doping procedures on NCs with the same chemical compositions have resulted in quite different photophysics. Through a detailed single molecule investigation of a postsynthesis Ag+ doping of CdSe NCs, a number of species were identified within a single doped NC sample, suggesting the differences in the optical properties of the various synthesis methods are due to the varied contributions of each species. Electrostatic force microscopy (EFM), electron energy loss spectroscopy (EELS) mapping, and single molecule photoluminescence (PL) studies were used to identify four possible species resulting from the Ag+-CdSe cation exchange doping process. The heterogeneity of these samples shows the difficulty in controlling a postsynthesis cation exchange method to produce homogeneous samples needed for use in any potential application. Additionally, the heterogeneity in the doped samples demonstrates that significant care must be taken in describing the ensemble or average characteristics of the sample.

Beyond Universal Volume Scaling: Tailoring Two-Photon Absorption in Nanomaterials by Heterostructure Design

Colloidal semiconductor nanomaterials present broadband, with large cross-section, two-photon absorption (2PA) spectra, which turn them into an important platform for applications that benefit from a high nonlinear optical response. Despite that, to date, the only means to control the magnitude of the 2PA cross-section is by changing the nanoparticle volume, as it follows a universal volume scale, independent of the material composition. As the emission spectrum is connected utterly to the nanomaterial dimensions, for a given material, the magnitude of the nonlinear optical response is also coupled to the emission spectra. Here, we demonstrate a means to decouple both effects by exploring the 2PA response of different types of heterostructures, tailoring the volume dependence of the 2PA cross-section due to the different dependence of the density of final states on the nanoparticle volume. By heterostructure engineering, one can obtain 1 order of magnitude enhancement of the 2PA cross-section with minimum emission spectra shift.

Mono- and Co-Doped Mn-Doped CsPbCl3 Perovskites with Enhanced Doping Efficiency and Photoluminescent Performance

To investigate the effect of Mn and other metal dopants on the photoelectronic performance of CsPbCl3 perovskites, we conducted a series of theoretical analyses. Our findings showed that after Mn mono-doping, the CsPbCl3 lattice contracted and the bonding strength increased, resulting in a more compact structure of the metal octahedral cage. The relaxation of the metal octahedral cage, along with the Jahn-Teller effect, results in a decrease in lattice strain between the octahedra and a reduction in the energy of the entire lattice due to the deformation of the metal octahedron. These three factors work together to reduce intrinsic defects and enhance the stability and electronic properties of CsPbCl3 perovskites. The solubility of the Mn dopant is significantly increased when co-doped with Ni, Fe, and Co dopants, as it compensates for the lattice strain induced by Mn. Doping CsPbCl3 perovskites reduces the band gap due to the decreased contributions of 3d orbitals from the dopants. Our analyses have revealed that strengthening the CsPbCl3 lattice and reducing intrinsic defects can result in improved stability and PL properties. Moreover, increasing Mn solubility and decreasing the bandgap can enhance the PLQY of orange luminescence in CsPbCl3 perovskites. These findings offer valuable insights for the development of effective strategies to enhance the photoelectronic properties of these materials.

An Atomically Dispersed Mn-Photocatalyst for Generating Hydrogen Peroxide from Seawater via the Water Oxidation Reaction (WOR)

In this work, we have fabricated an aryl amino-substituted graphitic carbon nitride (g-C₃N₄) catalyst with atomically dispersed Mn capable of generating hydrogen peroxide (H₂O₂) directly from seawater. This new catalyst exhibited excellent reactivity, obtaining up to 2230 μM H₂O₂ in 7 h from alkaline water and up to 1800 μM from seawater under identical conditions. More importantly, the catalyst was quickly recovered for subsequent reuse without appreciable loss in performance. Interestingly, unlike the usual two-electron oxygen reduction reaction pathway, the generation of H₂O₂ was through a less common two-electron water oxidation reaction (WOR) process in which both the direct and indirect WOR processes occurred; namely, photoinduced h⁺ directly oxidized H₂O to H₂O₂ via a one-step 2e^- WOR, and photoinduced h⁺ first oxidized a hydroxide (OH^-) ion to generate a hydroxy radical (^•OH), and H₂O₂ was formed indirectly by the combination of two ^•OH. We have characterized the material, at the catalytic sites, at the atomic level using electron paramagnetic resonance, X-ray absorption near edge structure, extended X-ray absorption fine structure, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, magic-angle spinning solid-state NMR spectroscopy, and multiscale molecular modeling, combining classical reactive molecular dynamics simulations and quantum chemistry calculations.

Colloidal Quantum Dots in Very-Long-Wave Infrared Detection: Progress, Challenges, and Opportunities

The very long wave infrared (VLWIR) is an electromagnetic wave with a wavelength range of 15-30 μm, which plays an important role in missile defense and weather monitoring. This paper briefly introduces the development of intraband absorption of colloidal quantum dots (CQDs) and investigates the possibility of using CQDs to produce VLWIR detectors. We calculated the detectivity of CQDs for VLWIR. The results show that the detectivity is affected by parameters such as quantum dot size, temperature, electron relaxation time, and distance between quantum dots. The theoretical derivation results, combined with the current development status, show that the detection of VLWIR by CQDs is still in the theoretical stage.

Single-atom vibrational spectroscopy with chemical-bonding sensitivity

Correlation of lattice vibrational properties with local atomic configurations in materials is essential for elucidating functionalities that involve phonon transport in solids. Recent developments in vibrational spectroscopy in a scanning transmission electron microscope have enabled direct measurements of local phonon modes at defects and interfaces by combining high spatial and energy resolution. However, pushing the ultimate limit of vibrational spectroscopy in a scanning transmission electron microscope to reveal the impact of chemical bonding on local phonon modes requires extreme sensitivity of the experiment at the chemical-bond level. Here we demonstrate that, with improved instrument stability and sensitivity, the specific vibrational signals of the same substitutional impurity and the neighbouring carbon atoms in monolayer graphene with different chemical-bonding configurations are clearly resolved, complementary with density functional theory calculations. The present work opens the door to the direct observation of local phonon modes with chemical-bonding sensitivity, and provides more insights into the defect-induced physics in graphene.

Engineering interface structures for heterojunction photocatalysts

Solar photocatalysis is the most ideal solution to global energy concerns and environmental deterioration nowadays. The heterojunction combination has become one of the most successful and effective strategies to design and manufacture composite photocatalysts. Heterojunction structures are widely documented to markedly improve the photocatalytic behavior of materials by enhancing the separation and transfer of photogenerated charges, widening the light absorption range, and broadening redox potentials, which are attributed to the presence of both build-in electric fields at the interface of two different materials and the complementarity between different electron structures. So far, a large number of heterojunction photocatalytic materials have been reported and applied for water splitting, reduction of carbon dioxide and nitrogen, environmental cleaning, etc. This review outlines the recent accomplishments in the design and modification of interface structures in heterojunction photocatalysts, aiming to provide some useful perspectives for future research in this field.

Atomically flat semiconductor nanoplatelets for light-emitting applications

The last decade has witnessed extensive breakthroughs and significant progress in atomically flat two-dimensional (2D) semiconductor nanoplatelets (NPLs) in terms of synthesis, growth mechanisms, optical and electronic properties and practical applications. Such NPLs have electronic structures similar to those of quantum wells in which excitons are predominantly confined along the vertical direction, while electrons are free to move in the lateral directions, resulting in unique optical properties, such as extremely narrow emission line width, short photoluminescence (PL) lifetime, high gain coefficient, and giant oscillator strength transition (GOST). These unique optical properties make NPLs favorable for high color purity light-emitting applications, in particular in light-emitting diodes (LEDs), backlights for liquid crystal displays (LCDs) and lasers. This review article first introduces the intrinsic characteristics of 2D semiconductor NPLs with atomic flatness. Subsequently, the approaches and mechanisms for the controlled synthesis of atomically flat NPLs are summarized followed by an insight on recent progress in the mediation of core/shell, core/crown and core/crown@shell structures by selective epitaxial growth of passivation layers on different planes of NPLs. Moreover, an overview of the unique optical properties and the associated light-emitting applications is elaborated. Despite great progress in this research field, there are some issues relating to heavy metal elements such as Cd²⁺ in NPLs, and the ambiguous gain mechanisms of NPLs and others are the main obstacles that prevent NPLs from widespread applications. Therefore, a perspective is included at the end of this review article, in which the current challenges in this stimulating research field are discussed and possible solutions to tackle these challenges are proposed.

Nanomaterials as Photocatalysts-Synthesis and Their Potential Applications

Increasing demand for energy and environmental degradation are the most serious problems facing the man. An interesting issue that can contribute to solving these problems is the use of photocatalysis. According to literature, solar energy in the presence of a photocatalyst can effectively (i) be converted into electricity/fuel, (ii) break down chemical and microbial pollutants, and (iii) help water purification. Therefore, the search for new, efficient, and stable photocatalysts with high application potential is a point of great interest. The photocatalysts must be characterized by the ability to absorb radiation from a wide spectral range of light, the appropriate position of the semiconductor energy bands in relation to the redox reaction potentials, and the long diffusion path of charge carriers, besides the thermodynamic, electrochemical, and photoelectrochemical stabilities. Meeting these requirements by semiconductors is very difficult. Therefore, efforts are being made to increase the efficiency of photo processes by changing the electron structure, surface morphology, and crystal structure of semiconductors. This paper reviews the recent literature covering the synthesis and application of nanomaterials in photocatalysis.

Review of Mn-Doped Semiconductor Nanocrystals for Time-Resolved Luminescence Biosensing/Imaging

Colloidal semiconductor nanocrystals (NCs) have been developed for decades and are widely applied in biosensing/imaging. However, their biosensing/imaging applications are mainly based on luminescence-intensity measurement, which suffers from autofluorescence in complex biological samples and thus limits the biosensing/imaging sensitivities. It is expected for these NCs to be further developed to gain luminescence features that can overcome sample autofluorescence. On the other hand, time-resolved luminescence measurement utilizing long-lived-luminescence probes is an efficient technique to eliminate short-lived autofluorescence of samples while recording time-resolved luminescence of the probes for signal measurement after pulsed excitation from a light source. Despite time-resolved measurement being very sensitive, the optical limitations of many of the current long-lived-luminescence probes cause time-resolved measurement to be generally performed in laboratories with bulky and costly instruments. In order to apply highly sensitive time-resolved measurement for in-field or point-of-care (POC) testing, it is essential to develop probes possessing high brightness, low-energy (visible-light) excitation, and long lifetimes of up to milliseconds. Such desired optical features can significantly simplify the design criteria of time-resolved measurement instruments and facilitate the development of low-cost, compact, sensitive instruments for in-field or POC testing. Mn-doped NCs have recently been in rapid development and provide a strategy to solve the challenges faced by both colloidal semiconductor NCs and time-resolved luminescence measurement. In this review, we outline the major achievements in the development of Mn-doped binary and multinary NCs, with emphasis on their synthesis approaches and luminescence mechanisms. Specifically, we demonstrate how researchers approached these obstacles to achieve the aforementioned desired optical properties on the basis of the progressive understanding of Mn emission mechanisms. Afterward, we review representative applications of Mn-doped NCs in time-resolved luminescence biosensing/imaging and present the potential of Mn-doped NCs in advancing time-resolved luminescence biosensing/imaging for in-field or POC testing.

Slow Hole Localization and Fast Electron Cooling in Cu-Doped InP/ZnSe Quantum Dots

Impurity doping of low-dimensional semiconductors is an interesting route towards achieving control over carrier dynamics and energetics, e.g., to improve hot carrier extraction, or to obtain strongly Stokes shifted luminescence. Such studies remain, however, underexplored for the emerging family of III-V colloidal quantum dots (QDs). Here, we show through a detailed global analysis of multiresonant pump-probe spectroscopy that electron cooling in copper-doped InP quantum dot (QDs) proceeds on subpicosecond time scales. Conversely, hole localization on Cu dopants is remarkably slow (1.8 ps), yet still leads to very efficient subgap emission. Due to this slow hole localization, common Auger assisted pathways in electron cooling cannot be blocked by Cu doping III-V systems, in contrast with the case of II-VI QDs. Finally, we argue that the structural relaxation around the Cu dopants, estimated to impart a reorganization energy of 220 meV, most likely proceeds simultaneously with the localization itself leading to efficient luminescence.

Cu+ → Mn2+ Energy Transfer in Cu, Mn Coalloyed Cs3ZnCl5 Colloidal Nanocrystals

In this work, we report the hot-injection synthesis of Cs₃ZnCl₅ colloidal nanocrystals (NCs) with tunable amounts of Cu⁺ and Mn²⁺ substituent cations. All the samples had a rodlike morphology, with a diameter of ∼14 nm and a length of ∼30-100 nm. Alloying did not alter the crystal structure of the host Cs₃ZnCl₅ NCs, and Cu ions were mainly introduced in the oxidation state +1 according to X-ray photoelectron and electron paramagnetic resonance spectroscopies. The spectroscopic analysis of unalloyed, Cu-alloyed, Mn-alloyed, and Cu, Mn coalloyed NCs indicated that (i) the Cs₃ZnCl₅ NCs have a large band gap of ∼5.35 eV; (ii) Cu(I) aliovalent alloying leads to an absorption shoulder/peak at ∼4.8 eV and cyan photoluminescence (PL) peaked at 2.50 eV; (iii) Mn(II) isovalent alloying leads to weak Mn PL, which intensifies remarkably in the coalloyed samples, prompted by an energy transfer (ET) process between the Cu and Mn centers, favored by the overlap between the lowest (⁶A₁ → ⁴T₁) transition for tetrahedrally coordinated Mn²⁺ and the PL profile from Cu(I) species in the Cs₃ZnCl₅ NCs. The efficiency of this ET process reaches a value of 61% for the sample with the highest extent of Mn alloying. The PL quantum yield (QY) values in these Cu, Mn coalloyed NCs are lower at higher Mn contents. The analysis of the Mn PL dynamics in these samples indicates that this PL drop stems from inter-Mn exciton migration, which increases the likelihood of trapping in defect sites, in agreement with previous studies.

Modulating the Energy Band Structure of the Mg-Doped Sr0.5Pr0.5Fe0.2Mg0.2Ti0.6O3-δ Electrolyte with Boosted Ionic Conductivity and Electrochemical Performance for Solid Oxide Fuel Cells

Achieving fast ionic conductivity in the electrolyte at low operating temperatures while maintaining the stable and high electrochemical performance of solid oxide fuel cells (SOFCs) is challenging. Herein, we propose a new type of electrolyte based on perovskite Sr_0.5Pr_0.5Fe_0.4Ti_0.6O_3-δ for low-temperature SOFCs. The ionic conducting behavior of the electrolyte is modulated using Mg doping, and three different Sr_0.5Pr_0.5Fe_0.4-xMg_xTi_0.6O_3-δ (x = 0, 0.1, and 0.2) samples are prepared. The synthesized Sr_0.5Pr_0.5Fe_0.2Mg_0.2Ti_0.6O_3-δ (SPFMg_0.2T) proved to be an optimal electrolyte material, exhibiting a high ionic conductivity of 0.133 S cm^-1 along with an attractive fuel cell performance of 0.83 W cm^-2 at 520 °C. We proved that a proper amount of Mg doping (20%) contributes to the creation of an adequate number of oxygen vacancies, which facilitates the fast transport of the oxide ions. Considering its rapid oxide ion transport, the prepared SPFMg_0.2T presented heterostructure characteristics in the form of an insulating core and superionic conduction via surface layers. In addition, the effect of Mg doping is intensively investigated to tune the band structure for the transport of charged species. Meanwhile, the concept of energy band alignment is employed to interpret the working principle of the proposed electrolyte. Moreover, the density functional theory is utilized to determine the perovskite structures of SrTiO_3-δ and Sr_0.5Pr_0.5Fe_0.4-xMg_xTi_0.6O_3-δ (x = 0, 0.1, and 0.2) and their electronic states. Further, the SPFMg_0.2T with 20% Mg doping exhibited low dissociation energy, which ensures the fast and high ionic conduction in the electrolyte. Inclusively, Sr_0.5Pr_0.5Fe_0.4Ti_0.6O_3-δ is a promising electrolyte for SOFCs, and its performance can be efficiently boosted via Mg doping to modulate the energy band structure.

Highly Luminescent and Photostable Core/Shell/Shell ZnSeS/Cu:ZnS/ZnS Quantum Dots Prepared via a Mild Aqueous Route

An aqueous-phase synthesis of 3-mercaptopropionic acid (3-MPA)-capped core/shell/shell ZnSeS/Cu:ZnS/ZnS QDs was developed. The influence of the Cu-dopant location on the photoluminescence (PL) emission intensity was investigated, and the results show that the introduction of the Cu dopant in the first ZnS shell leads to QDs exhibiting the highest PL quantum yield (25%). The influence of the Cu-loading in the dots on the PL emission was also studied, and a shift from blue-green to green was observed with the increase of the Cu doping from 1.25 to 7.5%. ZnSeS/Cu:ZnS/ZnS QDs exhibit an average diameter of 2.1 ± 0.3 nm and are stable for weeks in aqueous solution. Moreover, the dots were found to be photostable under the continuous illumination of an Hg-Xe lamp and in the presence of oxygen, indicating their high potential for applications such as sensing or bio-imaging.

Tunable Multicolor Fluorescence of Perovskite-Based Composites for Optical Steganography and Light-Emitting Devices

Multicolor fluorescence of mixed halide perovskites enormously enables their applications in photonics and optoelectronics. However, it remains an arduous task to obtain multicolor emissions from perovskites containing single halogen to avoid phase segregation. Herein, a fluorescent composite containing Eu-based metal-organic frameworks (MOFs), 0D Cs₄PbBr₆, and 3D CsPbBr₃ is synthesized. Under excitations at 365 nm and 254 nm, the pristine composite emits blue (B) and red (R) fluorescence, which are ascribed to radiative defects within Cs₄PbBr₆ and ⁵D₀→⁷F_J transitions of Eu³⁺, respectively. Interestingly, after light soaking in the ambient environment, the blue fluorescence gradually converts into green (G) emission due to the defect repairing and 0D-3D phase conversion. This permanent and unique photochromic effect enables anticounterfeiting and microsteganography with increased security through a micropatterning technique. Moreover, the RGB luminescence is highly stable after encapsulation by a transparent polymer layer. Thus, trichromatic light-emitting modules are fabricated by using the fluorescent composites as color-converting layers, which almost fully cover the standard color gamut. Therefore, this work innovates a strategy for construction of tunable multicolor luminescence by manipulating the radiative defects and structural dimensionality.

Plasmonic metal oxides and their biological applications

Metal oxides modified with dopants and defects are an emerging class of novel materials supporting the localized surface plasmon resonance across a wide range of optical wavelengths, which have attracted tremendous research interest particularly in biological applications in the past decade. Compared to conventional noble metal-based plasmonic materials, plasmonic metal oxides are particularly favored for their cost efficiency, flexible plasmonic properties, and improved biocompatibility, which can be important to accelerate their practical implementation. In this review, we first explicate the origin of plasmonics in dopant/defect-enabled metal oxides and their associated tunable localized surface plasmon resonance through the conventional Mie-Gans model. The research progress of dopant incorporation and defect generation in metal oxide hosts, including both in situ and ex situ approaches, is critically discussed. The implementation of plasmonic metal oxides in biological applications in terms of therapy, imaging, and sensing is summarized, in which the uniqueness of dopant/defect-driven plasmonics for inducing novel functionalities is particularly emphasized. This review may provide insightful guidance for developing next-generation plasmonic devices for human health monitoring, diagnosis and therapy.

Comparative Research on the Thermophysical Properties of Nano-Sized La2(Zr0.7Ce0.3)2O7 Synthesized by Different Routes

La2(Zr0.7Ce0.3)2O7 has been regarded as an ideal candidate for the next generation of thermal barrier coatings (TBCs) due to its prominent superiority. In this paper, the nano-sized La2(Zr0.7Ce0.3)2O7 was synthesized using two different synthetic routes: sol-gel and hydrothermal processes. Various techniques were utilized to assess the differences in the relevant thermophysical properties created by the different synthetic methods. According to the investigations, both samples exhibited pyrochlore structures with an excellent thermal stability. The sample synthesized via the hydrothermal method showed a more uniform particle size and morphology than that obtained through the sol-gel technique. The former also possessed a better sinter-resistance property, a more outstanding TEC (thermal expansion coefficient) and thermal conductivity, and a larger activation energy for crystal growth than the latter. The micro-strain of both samples showed an interesting change as the temperature increased, and 1200 °C was the turning point. Additionally, relative mechanisms were discussed in detail.