The transition to flying insects: lessons from evo-devo and fossils

Insects are the only arthropod group to achieve powered flight, which facilitated their explosive radiation on land. It remains a significant challenge to understand the evolutionary transition from nonflying (apterygote) to flying (pterygote) insects due to the large gap in the fossil record. Under such a situation, ontogenic information has historically been used to compensate for fossil evidence. Recent evo-devo studies support and refine a paleontology-based classical hypothesis that an ancestral exite incorporated into the body wall contributed to the origin of insect wings. The modern hypothesis locates an ancestral precoxa leg segment with an exite within the hexapod lateral tergum, reframing the long-standing debate on the insect wing origin. A current focus is on the contributions of the incorporated exite homolog and surrounding tissues, such as the pleuron and the medial bona fide tergum, to wing evolution. In parallel, recent analyses of Paleozoic fossils have confirmed thoracic and abdominal lateral body outgrowths as transitional wing precursors and suggested their possible role as respiratory organs in aquatic or semiaquatic environments. These recent studies have revised our understanding of the transition to flying insects. This review highlights recent progress in both evo-devo and paleontology, and discusses future challenges, including the evolution of metamorphic development.

The cryptonephridial/rectal complex: an evolutionary adaptation for water and ion conservation

Arthropods have integrated digestive and renal systems, which function to acquire and maintain homeostatically the substances they require for survival. The cryptonephridial complex (CNC) is an evolutionary novelty in which the renal organs and gut have been dramatically reorganised. Parts of the renal or Malpighian tubules (MpTs) form a close association with the surface of the rectum, and are surrounded by a novel tissue, the perinephric membrane, which acts to insulate the system from the haemolymph and thus allows tight regulation of ions and water into and out of the CNC. The CNC can reclaim water and solutes from the rectal contents and recycle these back into the haemolymph. Fluid flow in the MpTs runs counter to flow within the rectum. It is this countercurrent arrangement that underpins its powerful recycling capabilities, and represents one of the most efficient water conservation mechanisms in nature. CNCs appear to have evolved multiple times, and are present in some of the largest and most evolutionarily successful insect groups including the larvae of most Lepidoptera and in a major beetle lineage (Cucujiformia + Bostrichoidea), suggesting that the CNC is an important adaptation. Here we review the knowledge of this remarkable organ system gained over the past 200 years. We first focus on the CNCs of tenebrionid beetles, for which we have an in-depth understanding from physiological, structural and ultrastructural studies (primarily in Tenebrio molitor), which are now being extended by studies in Tribolium castaneum enabled by advances in molecular and microscopy approaches established for this species. These recent studies are beginning to illuminate CNC development, physiology and endocrine control. We then take a broader view of arthropod CNCs, phylogenetically mapping their reported occurrence to assess their distribution and likely evolutionary origins. We explore CNCs from an ecological viewpoint, put forward evidence that CNCs may primarily be adaptations for facing the challenges of larval life, and argue that their loss in many aquatic species could point to a primary function in conserving water in terrestrial species. Finally, by considering the functions of renal and digestive epithelia in insects lacking CNCs, as well as the typical architecture of these organs in relation to one another, we propose that ancestral features of these organs predispose them for the evolution of CNCs.

Taking flight!

Understanding the origins of novel complex traits, the evolutionary transitions they enabled, and how those shaped the subsequent course of evolution, are all foundational objectives of evolutionary biology. Yet how developmental systems may transform to yield the first eye, limb, or placenta remains poorly understood. Seminal work by Courtney Clark-Hachtel, David Linz, and Yoshinori Tomoyasu published in the Proceedings of the National Academy of Sciences in 2013 used the origins of insect wings - one of the most impactful innovations of animal life on Earth - to provide both a case study and a new way of thinking of how novel complex traits may come into being. This paradigm-setting study not only transformed the way we view insect wings, their origins, and their affinities to other morphological structures; even more importantly, it created entryways to envision innovation as emerging gradually, not somehow divorced from ancestral homology, but through it via the differential modification, fusion, and elaboration of ancestral component parts. In a conceptual universe of descent with modification, where everything new must ultimately emerge from the old, this work thereby established a powerful bridge connecting ancestral homology and novelty through a gradual process of innovation, sparking much creative and groundbreaking work to follow since its publication just a little over a decade ago.

Identification of Multifunctional Putative Bioactive Peptides in the Insect Model Red Palm Weevil (Rhynchophorus ferrugineus)

Innate immunity, the body's initial defense against bacteria, fungi, and viruses, heavily depends on antimicrobial peptides (AMPs), which are small molecules produced by all living organisms. Insects, with their vast biodiversity, are one of the most abundant and innovative sources of AMPs. In this study, AMPs from the red palm weevil (RPW) Rhynchophorus ferrugineus (Coleoptera: Curculionidae), a known invasive pest of palm species, were examined. The AMPs were identified in the transcriptomes from different body parts of male and female adults, under different experimental conditions, including specimens collected from the field and those reared in the laboratory. The RPW transcriptomes were examined to predict antimicrobial activity, and all sequences putatively encoding AMPs were analyzed using several machine learning algorithms available in the CAMPR3 database. Additionally, anticancer, antiviral, and antifungal activity of the peptides were predicted using iACP, AVPpred, and Antifp server tools, respectively. Physicochemical parameters were assessed using the Antimicrobial Peptide Database Calculator and Predictor. From these analyses, 198 putatively active peptides were identified, which can be tested in future studies to validate the in silico predictions. Genome-wide analysis revealed that several AMPs have predominantly emerged through gene duplication. Noticeably, we detect a newly originated defensin allele from an ancestral defensin via the deletion of two amino acids following gene duplication in RPW, which may confer an enhanced resilience to microbial infection. Our study shed light on AMP gene families and shows that high duplication and deletion rates are essential to achieve a diversity of antimicrobial mechanisms; hence, we propose the RPW AMPs as a model for exploring gene duplication and functional variations against microbial infection.

Insect Flight: State of the Field and Future Directions

The evolution of flight in an early winged insect ancestral lineage is recognized as a key adaptation explaining the unparalleled success and diversification of insects. Subsequent transitions and modifications to flight machinery, including secondary reductions and losses, also play a central role in shaping the impacts of insects on broadscale geographic and ecological processes and patterns in the present and future. Given the importance of insect flight, there has been a centuries-long history of research and debate on the evolutionary origins and biological mechanisms of flight. Here, we revisit this history from an interdisciplinary perspective, discussing recent discoveries regarding the developmental origins, physiology, biomechanics, and neurobiology and sensory control of flight in a diverse set of insect models. We also identify major outstanding questions yet to be addressed and provide recommendations for overcoming current methodological challenges faced when studying insect flight, which will allow the field to continue to move forward in new and exciting directions. By integrating mechanistic work into ecological and evolutionary contexts, we hope that this synthesis promotes and stimulates new interdisciplinary research efforts necessary to close the many existing gaps about the causes and consequences of insect flight evolution.

Lepidopteran prolegs are novel traits, not leg homologs

Lepidopteran larvae have both thoracic legs and abdominal prolegs, yet it is unclear whether these are serial homologs. A RNA-seq analysis with various appendages of Bicyclus anynana butterfly larvae indicated that the proleg transcriptome resembles the head-horn transcriptome, a novel trait in the lepidoptera, but not a thoracic leg. Under a partial segment abdominal-A (abd-A) knockout, both thoracic leg homologs (pleuropodia) and prolegs developed in the same segment, arguing that both traits are not serial homologs. Further, three of the four coxal marker genes, Sp5, Sp6-9, and araucan, were absent from prolegs, but two endite marker genes, gooseberry and Distal-less, were expressed in prolegs, suggesting that prolegs may be using a modular endite gene-regulatory network (GRN) for their development. We propose that larval prolegs are novel traits derived from the activation of a pre-existing modular endite GRN in the abdomen using abd-A, the same Hox gene that still represses legs in more lateral positions.

Temporal changes in the physical and mechanical properties of beetle elytra during maturation

Changes in physical properties of Tenebrio molitor and Tribolium castaneum elytra (hardened forewings) were studied to understand how the development of microstructure and chemical interactions determine cuticle mechanical properties. Analysis of these properties supports a model in which cuticular material is continuously secreted from epidermal cells to produce an extracellular matrix so that the outermost layers mature first. It is hypothesized that enzymatic crosslinking and pigmentation reactions along with dehydration help to stabilize the protein-chitin network within the initial layers of cuticle shortly after eclosion. Mature layers are proposed to bear most of the mechanical loads. The frequency dependence of the storage modulus and the tan δ values decreased during the beginning of maturation, reaching constant values after 48 h post-eclosion. A decrease of tan δ indicates an increase in crosslinking of the material. The water content declined from 75% to 31%, with a significant portion lost from within the open spaces between the dorsal and ventral cuticular layers. Dehydration had a less significant influence than protein crosslinking on the mechanical properties of the elytron during maturation. When Tribolium cuticular protein TcCP30 expression was decreased by RNAi, the tan δ and frequency dependence of E' of the elytron did not change during maturation. This indicates that TcCP30 plays a role in the crosslinking process of the beetle's exoskeleton. This study was inspired by previous work on biomimetic multicomponent materials and helps inform future work on creating robust lightweight materials derived from natural sources. STATEMENT OF SIGNIFICANCE: Examination of changes in the physical properties of the elytra (hardened forewings) of two beetle species advanced understanding of how the molecular interactions influence the mechanical properties of the elytra. Physical characterization, including dynamic mechanical analysis, determined that the outer portion of the elytra matured first, while epidermal cells continued to secrete reactive components until the entire structure reached maturation. RNA interference was used to identify the role of a key protein in the elytra. Suppression of its expression reduced the formation of crosslinked polymeric components in the elytra. Identifying the molecular interactions in the matrix of proteins and polysaccharides in the elytra together with their hierarchical architecture provides important design concepts in the development of biomimetic materials.

Fossoriality in desert-adapted tenebrionid (Coleoptera) larvae

In many extreme arid ecosystems, insects constitute major faunal components and are key contributors in nutrient cycling. Previous research on xerophily in insects has focused on adult forms. This study investigates skeletomuscular and behavioural adaptations of the Kalahari sandworm beetle larvae (Gonopus tibialis Fabricius) for dwelling in the sand. Microcomputed tomography enabled cuticle thickness distribution analysis, revealing structural reinforcements of the mandibular edge, the middle part of the head, and the ventral side of the front legs. Laboratory observations and the analysis of muscular system allowed for the definition and functional description of the elements of the digging apparatus of the sandworm larvae. Obtained results point to the crucial role of the head and mandibles in the digging process. These observations are important for understanding desert ecology and pose a challenge to develop newer excavation techniques.

Abdominal serial homologues of wings in Paleozoic insects

The Late Paleozoic acquisition of wings in insects represents one of the key steps in arthropod evolution. While the origin of wings has been a contentious matter for nearly two centuries, recent evolutionary developmental studies suggest either the participation of both tergal and pleural tissues in the formation of wings¹ or wings originated from exites of the most proximal leg podite incorporated into the insect body wall.² The so-called "dual hypothesis" for wing origins finds support from studies of embryology, evo-devo, and genomics, although the degree of the presumed contribution from tergal and pleural tissues differ.^3-6 Ohde et al.,⁷ confirmed a major role for tergal tissue in the formation of the cricket wing and suggested that "wings evolved from the pre-existing lateral terga of a wingless insect ancestor." Additional work has focused on identifying partial serially homologous structures of wings on the prothorax^8,9 and abdominal segments.¹⁰ Thus, several studies have suggested that the prothoracic horns in scarab beetles,⁹ gin traps of tenebrionid and scarab beetle pupae,^11,12 or abdominal tracheal gills of mayfly larvae^1,13 evolved from serial homologues of wings. Here, we present critical information from abdominal lateral outgrowths (flaps) of Paleozoic palaeodictyopteran larvae, which show comparable structure to thoracic wings, consisting of cordate lateral outgrowths antero-basally hinged by muscle attachments. These flaps therefore most likely represent wing serial homologues. The presence of these paired outgrowths on abdominal segments I-IX in early diverging Pterygota likely corresponds to crustacean epipods^14,15 and resembles a hypothesized ancestral body plan of a "protopterygote" model.

A hemimetabolous wing development suggests the wing origin from lateral tergum of a wingless ancestor

The origin and evolution of the novel insect wing remain enigmatic after a century-long discussion. The mechanism of wing development in hemimetabolous insects, in which the first functional wings evolved, is key to understand where and how insect wings evolutionarily originate. This study explored the developmental origin and the postembryonic dramatic growth of wings in the cricket Gryllus bimaculatus. We find that the lateral tergal margin, which is homologous between apterygote and pterygote insects, comprises a growth organizer to expand the body wall to form adult wing blades in Gryllus. We also find that Wnt, Fat-Dachsous, and Hippo pathways are involved in the disproportional growth of Gryllus wings. These data provide insights into where and how insect wings originate. Wings evolved from the pre-existing lateral terga of a wingless insect ancestor, and the reactivation or redeployment of Wnt/Fat-Dachsous/Hippo-mediated feed-forward circuit might have expanded the lateral terga.

Here, the authors investigate wing development in cricket and find support for evolution of the novel insect wing from the pre-existing dorsal body wall of a wingless ancestor by activation of an evolutionarily conserved growth mechanism.

Out from under the wing: reconceptualizing the insect wing gene regulatory network as a versatile, general module for body-wall lobes in arthropods

Body plan evolution often occurs through the differentiation of serially homologous body parts, particularly in the evolution of arthropod body plans. Recently, homeotic transformations resulting from experimental manipulation of gene expression, along with comparative data on the expression and function of genes in the wing regulatory network, have provided a new perspective on an old question in insect evolution: how did the insect wing evolve? We investigated the metamorphic roles of a suite of 10 wing- and body-wall-related genes in a hemimetabolous insect, Oncopeltus fasciatus. Our results indicate that genes involved in wing development in O. fasciatus play similar roles in the development of adult body-wall flattened cuticular evaginations. We found extensive functional similarity between the development of wings and other bilayered evaginations of the body wall. Overall, our results support the existence of a versatile development module for building bilayered cuticular epithelial structures that pre-dates the evolutionary origin of wings. We explore the consequences of reconceptualizing the canonical wing-patterning network as a bilayered body-wall patterning network, including consequences for long-standing debates about wing homology, the origin of wings and the origin of novel bilayered body-wall structures. We conclude by presenting three testable predictions that result from this reconceptualization.

Transcriptome dynamics during metamorphosis of imaginal discs into wings and thoracic dorsum in Apis mellifera castes

BACKGROUND

Much of the complex anatomy of a holometabolous insect is built from disc-shaped epithelial structures found inside the larva, i.e., the imaginal discs, which undergo a rapid differentiation during metamorphosis. Imaginal discs-derived structures, like wings, are built through the action of genes under precise regulation.

RESULTS

We analyzed 30 honeybee transcriptomes in the search for the gene expression needed for wings and thoracic dorsum construction from the larval wing discs primordia. Analyses were carried out before, during, and after the metamorphic molt and using worker and queen castes. Our RNA-seq libraries revealed 13,202 genes, representing 86.2% of the honeybee annotated genes. Gene Ontology analysis revealed functional terms that were caste-specific or shared by workers and queens. Genes expressed in wing discs and descendant structures showed differential expression profiles dynamics in premetamorphic, metamorphic and postmetamorphic developmental phases, and also between castes. At the metamorphic molt, when ecdysteroids peak, the wing buds of workers showed maximal gene upregulation comparatively to queens, thus underscoring differences in gene expression between castes at the height of the larval-pupal transition. Analysis of small RNA libraries of wing buds allowed us to build miRNA-mRNA interaction networks to predict the regulation of genes expressed during wing discs development.

CONCLUSION

Together, these data reveal gene expression dynamics leading to wings and thoracic dorsum formation from the wing discs, besides highlighting caste-specific differences during wing discs metamorphosis.

Hox genes are essential for the development of eyespots in Bicyclus anynana butterflies

The eyespot patterns found on the wings of nymphalid butterflies are novel traits that originated first in hindwings and subsequently in forewings, suggesting that eyespot development might be dependent on Hox genes. Hindwings differ from forewings in the expression of Ultrabithorax (Ubx), but the function of this Hox gene in eyespot development as well as that of another Hox gene Antennapedia (Antp), expressed specifically in eyespots centers on both wings, are still unclear. We used CRISPR-Cas9 to target both genes in Bicyclus anynana butterflies. We show that Antp is essential for eyespot development on the forewings and for the differentiation of white centers and larger eyespots on hindwings, whereas Ubx is essential not only for the development of at least some hindwing eyespots but also for repressing the size of other eyespots. Additionally, Antp is essential for the development of silver scales in male wings. In summary, Antp and Ubx, in addition to their conserved roles in modifying serially homologous segments along the anterior-posterior axis of insects, have acquired a novel role in promoting the development of a new set of serial homologs, the eyespot patterns, in both forewings (Antp) and hindwings (Antp and Ubx) of B. anynana butterflies. We propose that the peculiar pattern of eyespot origins on hindwings first, followed by forewings, could be due to an initial co-option of Ubx into eyespot development followed by a later, partially redundant, co-option of Antp into the same network.

What crustaceans can tell us about the evolution of insect wings and other morphologically novel structures

Acquisition of novel structures often has a profound impact on the adaptation of organisms. The wing of insects is one such example, facilitating their massive success and enabling them to become the dominant clade on this planet. However, its evolutionary origin as well as the mechanisms underpinning its evolution remain elusive. Studies in crustaceans, a wingless sister group of insects, have played a pivotal role in the wing origin debate. Three recent investigations into the genes related to insect wings and legs in crustaceans provided intriguing insights into how and where insect wings evolved. Interestingly, each study proposes a distinct mechanism as a key process underlying insect wing evolution. Here, I discuss what we can learn about the evolution of insect wings and morphological novelty in general by synthesizing the outcomes of these studies.

Tergal and pleural wing-related tissues in the German cockroach and their implication to the evolutionary origin of insect wings

The acquisition of wings has facilitated the massive evolutionary success of pterygotes (winged insects), which now make up nearly three-quarters of described metazoans. However, our understanding of how this crucial structure has evolved remains quite elusive. Historically, two ideas have dominated in the wing origin debate, one placing the origin in the dorsal body wall (tergum) and the other in the lateral pleural plates and the branching structures associated with these plates. Through studying wing-related tissues in the wingless segments (such as wing serial homologs) of the beetle, Tribolium castaneum, we obtained several crucial pieces of evidence that support a third idea, the dual origin hypothesis, which proposes that wings evolved from a combination of tergal and pleural tissues. Here, we extended our analysis outside of the beetle lineage and sought to identify wing-related tissues from the wingless segments of the cockroach, Blattella germanica. Through detailed functional and expression analyses for a critical wing gene, vestigial (vg), along with re-evaluating the homeotic transformation of a wingless segment induced by an improved RNA interference protocol, we demonstrate that B. germanica possesses two distinct tissues in their wingless segments, one with tergal and one with pleural nature, that might be evolutionarily related to wings. This outcome appears to parallel the reports from other insects, which may further support a dual origin of insect wings. However, we also identified a vg-independent tissue that contributes to wing formation upon homeotic transformation, as well as vg-dependent tissues that do not appear to participate in wing formation, in B. germanica, indicating a more complex evolutionary history of the tissues that contributed to the emergence of insect wings.

Wing serial homologues and the diversification of insect outgrowths: insights from the pupae of scarab beetles

Modification of serially homologous structures is a common avenue towards functional innovation in developmental evolution, yet ancestral affinities among serial homologues may be obscured as structure-specific modifications accumulate over time. We sought to assess the degree of homology to wings of three types of body wall projections commonly observed in scarab beetles: (i) the dorsomedial support structures found on the second and third thoracic segments of pupae, (ii) the abdominal support structures found bilaterally in most abdominal segments of pupae, and (iii) the prothoracic horns which depending on species and sex may be restricted to pupae or also found in adults. We functionally investigated 14 genes within, as well as two genes outside, the canonical wing gene regulatory network to compare and contrast their role in the formation of each of the three presumed wing serial homologues. We found 11 of 14 wing genes to be functionally required for the proper formation of lateral and dorsal support structures, respectively, and nine for the formation of prothoracic horns. At the same time, we document multiple instances of divergence in gene function across our focal structures. Collectively, our results support the hypothesis that dorsal and lateral support structures as well as prothoracic horns share a developmental origin with insect wings. Our findings suggest that the morphological and underlying gene regulatory diversification of wing serial homologues across species, life stages and segments has contributed significantly to the extraordinary diversity of arthropod appendages and outgrowths.

Knockout of crustacean leg patterning genes suggests that insect wings and body walls evolved from ancient leg segments

The origin of insect wings has long been debated. Central to this debate is whether wings are a novel structure on the body wall resulting from gene co-option, or evolved from an exite (outgrowth; for example, a gill) on the leg of an ancestral crustacean. Here, we report the phenotypes for the knockout of five leg patterning genes in the crustacean Parhyale hawaiensis and compare these with their previously published phenotypes in Drosophila and other insects. This leads to an alignment of insect and crustacean legs that suggests that two leg segments that were present in the common ancestor of insects and crustaceans were incorporated into the insect body wall, moving the proximal exite of the leg dorsally, up onto the back, to later form insect wings. Our results suggest that insect wings are not novel structures, but instead evolved from existing, ancestral structures.

Distinguishing serial homologs from novel traits: Experimental limitations and ideas for improvements

One of the central but yet unresolved problems in evolutionary biology concerns the origin of novel complex traits. One hypothesis is that complex traits derive from pre-existing gene regulatory networks (GRNs) reused and modified to specify a novel trait somewhere else in the body. This simple explanation encounters problems when the novel trait that emerges in a body is in a region that is known to harbor a latent or repressed trait that has been silent for millions of years. Is the novel trait merely a re-emerged de-repressed trait or a truly novel trait that emerged via a novel deployment of an old GRN? A couple of new studies sided on opposite sides of this question when investigating the origin of horns in dung beetles and helmets in treehoppers that develop in the first thoracic segment (T1) of their bodies, a segment known to harbor a pair of repressed/modified wings in close relatives. Here, I point to some key limitations of the experimental approaches used and highlight additional experiments that could be done in future to resolve the developmental origin of these and other traits.

Two sets of candidate crustacean wing homologues and their implication for the origin of insect wings

The origin of insect wings is a biological mystery that has fascinated scientists for centuries. Identification of tissues homologous to insect wings from lineages outside of Insecta will provide pivotal information to resolve this conundrum. Here, through expression and clustered regularly interspaced short palindromic repeats (CRISPR)-CRISPR-associated protein 9 (Cas9) functional analyses in Parhyale, we show that a gene network similar to the insect wing gene network (preWGN) operates both in the crustacean terga and in the proximal leg segments, suggesting that the evolution of a preWGN precedes the emergence of insect wings, and that from an evo-devo perspective, both of these tissues qualify as potential crustacean wing homologues. Combining these results with recent wing origin studies in insects, we discuss the possibility that both tissues are crustacean wing homologues, which supports a dual evolutionary origin of insect wings (that is, novelty through a merger of two distinct tissues). These outcomes have a crucial impact on the course of the intellectual battle between the two historically competing wing origin hypotheses.

Genomic adaptations to aquatic and aerial life in mayflies and the origin of insect wings

The evolution of winged insects revolutionized terrestrial ecosystems and led to the largest animal radiation on Earth. However, we still have an incomplete picture of the genomic changes that underlay this diversification. Mayflies, as one of the sister groups of all other winged insects, are key to understanding this radiation. Here, we describe the genome of the mayfly Cloeon dipterum and its gene expression throughout its aquatic and aerial life cycle and specific organs. We discover an expansion of odorant-binding-protein genes, some expressed specifically in breathing gills of aquatic nymphs, suggesting a novel sensory role for this organ. In contrast, flying adults use an enlarged opsin set in a sexually dimorphic manner, with some expressed only in males. Finally, we identify a set of wing-associated genes deeply conserved in the pterygote insects and find transcriptomic similarities between gills and wings, suggesting a common genetic program. Globally, this comprehensive genomic and transcriptomic study uncovers the genetic basis of key evolutionary adaptations in mayflies and winged insects.

Multiple Loci Control Eyespot Number Variation on the Hindwings of Bicyclus anynana Butterflies

The underlying genetic changes that regulate the appearance and disappearance of repeated traits, or serial homologs, remain poorly understood. One hypothesis is that variation in genomic regions flanking master regulatory genes, also known as input-output genes, controls variation in trait number, making the locus of evolution almost predictable. Another hypothesis implicates genetic variation in up- or downstream loci of master control genes. Here, we use the butterfly Bicyclus anynana, a species that exhibits natural variation in eyespot number on the dorsal hindwing, to test these two hypotheses. We first estimated the heritability of dorsal hindwing eyespot number by breeding multiple butterfly families differing in eyespot number and regressing eyespot numbers of offspring on midparent values. We then estimated the number and identity of independent genetic loci contributing to eyespot number variation by performing a genome-wide association study with restriction site-associated DNA sequencing from multiple individuals varying in number of eyespots sampled across a freely breeding laboratory population. We found that dorsal hindwing eyespot number has a moderately high heritability of ∼0.50 and is characterized by a polygenic architecture. Previously identified genomic regions involved in eyespot development, and novel ones, display high association with dorsal hindwing eyespot number, suggesting that homolog number variation is likely determined by regulatory changes at multiple loci that build the trait, and not by variation at single master regulators or input-output genes.

Beetle horns evolved from wing serial homologs

Understanding how novel complex traits originate is a foundational challenge in evolutionary biology. We investigated the origin of prothoracic horns in scarabaeine beetles, one of the most pronounced examples of secondary sexual traits in the animal kingdom. We show that prothoracic horns derive from bilateral source tissues; that diverse wing genes are functionally required for instructing this process; and that, in the absence of Hox input, prothoracic horn primordia transform to contribute to ectopic wings. Once induced, however, the transcriptional profile of prothoracic horns diverges markedly from that of wings and other wing serial homologs. Our results substantiate the serial homology between prothoracic horns and insects wings and suggest that other insect innovations may derive similarly from wing serial homologs and the concomitant establishment of structure-specific transcriptional landscapes.

Evolutionary origin and functioning of pregenital abdominal outgrowths in a viviparous insect, Arixenia esau

Although pregenital abdominal outgrowths occur only rarely in pterygote insects, they are interesting from the evolutionary viewpoint because of their potential homology to wings. Our previous studies of early development of an epizoic dermapteran, Arixenia esau revealed that abdominal segments of the advanced embryos and larvae, growing inside a mother’s uterus, are equipped with paired serial outgrowths. Here, we focus on the origin and functioning of these outgrowths. We demonstrate that they bud from the lateral parts of the abdominal nota, persist till the end of intrauterine development, and remain in contact with the uterus wall. We also show that the bundles of muscle fibers associated with the abdominal outgrowths may facilitate flow of the haemolymph from the outgrowths’ lumen to the larval body cavity. Following completion of the intrauterine development, abdominal outgrowths are shed together with the larval cuticle during the first molt after the larva birth. Using immunohistochemical and biochemical approaches, we demonstrate that the Arixenia abdominal outgrowths represent an evolutionary novelty, presumably related to intrauterine development, and suggest that they are not related to serial wing homologs.

Establishment of the mayfly Cloeon dipterum as a new model system to investigate insect evolution

The great capability of insects to adapt to new environments promoted their extraordinary diversification, resulting in the group of Metazoa with the largest number of species distributed worldwide. To understand this enormous diversity, it is essential to investigate lineages that would allow the reconstruction of the early events in the evolution of insects. However, research on insect ecology, physiology, development and evolution has mostly focused on few well-established model species. The key phylogenetic position of mayflies within Paleoptera as the sister group of the rest of winged insects and life history traits of mayflies make them an essential order to understand insect evolution. Here, we describe the establishment of a continuous culture system of the mayfly Cloeon dipterum and a series of experimental protocols and omics resources that allow the study of its development and its great regenerative capability. Thus, the establishment of Cloeon as an experimental platform paves the way to understand genomic and morphogenetic events that occurred at the origin of winged insects.

Morphogenesis of serial abdominal outgrowths during development of the viviparous dermapteran, Arixenia esau (Insecta, Dermaptera)

The embryos and first instar larvae of the epizoic earwig, Arixenia esau, develop sequentially in two different compartments of the female reproductive system, that is ovarian follicles and the lateral oviducts (the uterus). Here we show that the second (intrauterine) phase of development consists of three physiologically disparate stages: early embryos (before dorsal closure, surrounded by an egg envelope), late embryos (after dorsal closure, surrounded by an egg envelope) and the first instar larvae (after "hatching" from an egg envelope). Early and late embryos float in the fluid filling the uterus, whereas the first instar larvae develop attached to the uterus wall. Our analyses revealed also that in Arixenia serial multilobed outgrowths develop on dorso-lateral aspects of all abdominal segments. At the onset of the third developmental stage and after liberation from an egg envelope, these outgrowths (or more precisely their lobes) adhere to the epithelium lining the uterus, forming a series of small contact sites, where the mother and embryo tissues are separated only by a thin, presumably permeable, embryonic cuticle. We suggest that all these contact sites collectively constitute a dispersed placenta-like organ involved in the nourishment of the embryo.

Viviparity in Two Closely Related Epizoic Dermapterans Relies on Disparate Modifications of Reproductive Systems and Embryogenesis

Nutritional modes operating during embryonic/larval development of viviparous species range from "pure" lecitothrophy in which embryos rely solely on reserve materials (yolk spheres, lipid droplets, and glycogen particles) accumulated in the egg cytoplasm to matrotrophy in which embryos are continuously supplied with nutrients from a parental organism. Interestingly, a wide spectrum of diverse "mixed" modes employed in the embryo nourishment have also been described among viviparous species. Here, we summarize results of histochemical, ultrastructural, and biochemical analyses of reproductive systems as well as developing embryos of two closely related viviparous species of earwigs (Dermaptera), Hemimerus talpoides and Arixenia esau. These analyses clearly indicate that morphological as well as physiological modifications (adaptations) supporting viviparity and matrotrophy in Hemimerus and Arixenia, with the exception of a complex biphasic respiration, are markedly different. Most importantly, Hemimerus embryos complete their development inside terminal (largest) ovarian follicles, whereas Arixenia embryos, after initial developmental stages, are transferred to highly modified lateral oviducts, that is the uterus, where they develop until the release (birth) of larvae. The obtained results strongly suggest that viviparity in hemimerids and arixeniids had evolved independently and might therefore serve as an example of evolutionary parallelism as well as remarkable functional plasticity of insect reproduction and embryonic development.

Rhinoceros beetle horn development reveals deep parallels with dung beetles

Beetle horns are attractive models for studying the evolution of novel traits, as they display diverse shapes, sizes, and numbers among closely related species within the family Scarabaeidae. Horns radiated prolifically and independently in two distant subfamilies of scarabs, the dung beetles (Scarabaeinae), and the rhinoceros beetles (Dynastinae). However, current knowledge of the mechanisms underlying horn diversification remains limited to a single genus of dung beetles, Onthophagus. Here we unveil 11 horn formation genes in a rhinoceros beetle, Trypoxylus dichotomus. These 11 genes are mostly categorized as larval head- and appendage-patterning genes that also are involved in Onthophagus horn formation, suggesting the same suite of genes was recruited in each lineage during horn evolution. Although our RNAi analyses reveal interesting differences in the functions of a few of these genes, the overwhelming conclusion is that both head and thoracic horns develop similarly in Trypoxylus and Onthophagus, originating in the same developmental regions and deploying similar portions of appendage patterning networks during their growth. Our findings highlight deep parallels in the development of rhinoceros and dung beetle horns, suggesting either that both horn types arose in the common ancestor of all scarabs, a surprising reconstruction of horn evolution that would mean the majority of scarab species (~35,000) actively repress horn growth, or that parallel origins of these extravagant structures resulted from repeated co-option of the same underlying developmental processes.

Goliath and Hercules beetles include some of the largest insects known, and the horns they wield are spectacular. These ‘rhinoceros’ beetles form a subfamily within the Scarabaeidae, a clade containing ~35,000 primarily hornless species. The other subfamily of horned scarabs, dung beetles, is distantly related and their horns are considered a separate origin and parallel radiation. We characterize horn development in a rhinoceros beetle and show that the details are surprisingly similar to the horns of dung beetles. Our results reveal exciting parallels at the level of underlying developmental mechanism. The superficial similarity of these two types of beetle horns mirrors an even deeper similarity in the pathways and genes responsible for their construction.

A morphological novelty evolved by co-option of a reduced gene regulatory network and gene recruitment in a beetle

The mechanisms underlying the evolution of morphological novelties have remained enigmatic but co-option of existing gene regulatory networks (GRNs), recruitment of genes and the evolution of orphan genes have all been suggested to contribute. Here, we study a morphological novelty of beetle pupae called gin-trap. By combining the classical candidate gene approach with unbiased screening in the beetle Tribolium castaneum, we find that 70% of the tested components of the wing network were required for gin-trap development. However, many downstream and even upstream components were not included in the co-opted network. Only one gene was recruited from another biological context, but it was essential for the anteroposterior symmetry of the gin-traps, which represents a gin-trap-unique morphological innovation. Our data highlight the importance of co-option and modification of GRNs. The recruitment of single genes may not be frequent in the evolution of morphological novelties, but may be essential for subsequent diversification of the novelties. Finally, after having screened about 28% of annotated genes in the Tribolium genome to identify the genes required for gin-trap development, we found none of them are orphan genes, suggesting that orphan genes may have played only a minor, if any, role in the evolution of gin-traps.

Jumping and the aerial behavior of aquatic mayfly larvae (Myobaetis ellenae, Baetidae)

Mayfly larvae generally are aquatic, but some madicolous taxa (i.e., living in thin water films) crawl over rocks within streams and waterfalls. When startled, these larvae can break the water film, jump, and enter an aerial phase of locomotion. Because mayfly larvae have been suggested as potential exemplars for the origin of insect wings as tracheal gills, and furthermore represent the most basal extant lineage of pterygotes, we analyzed jumping behavior and free-fall trajectories for one such species of mayfly (Myobaetis ellenae, Baetidae) in Costa Rica. Jumping was commonplace in this taxon, but was undirected and was characterized by body spinning at high angular velocities. No aerodynamic role for the tracheal gills was evident. By contrast, jumping by a sympatric species of bristletail (Meinertellus sp., Archaeognatha) consistently resulted in head-first and stable body postures during aerial translation. Although capable of intermittently jumping into the air, the mayfly larvae could neither control nor target their aerial behavior. By contrast, a stable body posture during jumps in adult bristletails, together with the demonstrated capacity for directed aerial descent in arboreal representatives of this order, support ancestrally terrestrial origins for insect flight within the behavioral context of either jumping or falling from heights.

Detailed analysis of the prothoracic tissues transforming into wings in the Cephalothorax mutants of the Tribolium beetle

Despite the immense importance of the wing in the evolution and successful radiation of the insect lineages, the origin of this critical structure remains a hotly-debated mystery. Two possible tissues have been identified as an evolutionary origin of wings; the lateral expansion of the dorsal body wall (tergal edge) and structures related to an ancestral proximal leg segment (pleural tissues). Through studying wing-related tissues in the red flour beetle, Tribolium castaneum, we have previously presented evidence in support of a dual origin of insect wings, a third hypothesis proposing that wings evolved from a combination of both tergal and pleural tissues. One key finding came from the investigation of a Cephalothorax (Cx) mutant, in which the ectopic wing characteristic to this mutant was found to be formed from both tergal and pleural contributions. However, the degree of contribution of the two tissues to the wing remains elusive. Here, we took advantage of multiple Cx alleles available in Tribolium, and produced a variety of degrees and types of ectopic wing tissues in their prothoracic segments. Through detailed phenotypic scoring of the Cx phenotypes based on nine categories of mutant traits, along with comprehensive morphological analysis of the ectopic wing tissues, we found that (i) ectopic wing tissues can be formed at various locations in the prothorax, even internally, (ii) the lateral external ectopic wing tissues have tergal origin, while the internal and posterior external ectopic wing tissues appear to be of pleural origin, and (iii) the ectopic wing tissues of both tergal and pleural origin are capable of transforming into wing surface tissues. Collectively, these outcomes suggest that the evolutionary contribution of each tissue to a complete wing may be more complex than the simple binary view that is typically invoked by a dual origin model (i.e. the wing blade from the tergal contribution + musculature and articulation from the pleural contribution).

The tracheal system in post-embryonic development of holometabolous insects: a case study using the mealworm beetle

The tracheal (respiratory) system is regarded as one of the key elements which enabled insects to conquer terrestrial habitats and, as a result, achieve extreme species diversity. Despite this fact, anatomical data concerning this biological system is relatively scarce, especially in an ontogenetic context. The purpose of this study is to provide novel and reliable information on the post-embryonic development of the tracheal system of holometabolous insects using micro-computed tomography methods. Data concerning the structure of the respiratory system acquired from different developmental stages (larvae, pupae and adults) of a single insect species (Tenebrio molitor) are co-analysed in detail. Anatomy of the tracheal system is presented. Sample sizes used (29 individuals) enabled statistical analysis of the results obtained. The following aspects have been investigated (among others): the spiracle arrangement, the number of tracheal ramifications originating from particular spiracles, the diameter of longitudinal trunks, tracheal system volumes, tracheae diameter distribution and fractal dimension analysis. Based on the data acquired, the modularity of the tracheal system is postulated. Using anatomical and functional factors, the following respiratory module types have been distinguished: cephalo-prothoracic, metathoracic and abdominal. These modules can be unambiguously identified in all of the studied developmental stages. A cephalo-prothoracic module aerates organs located in the head capsule, prothorax and additionally prolegs. It is characterised by relatively thick longitudinal trunks and originates in the first thoracic spiracle pair. Thoracic modules support the flight muscles, wings, elytra, meso- and metalegs. The unique feature of this module is the presence of additional longitudinal connections between the neighbouring spiracles. These modules are concentrated around the second prothoracic and the first abdominal spiracle pairs. An abdominal module is characterised by relatively thin ventral longitudinal trunks. Its main role is to support systems located in the abdomen; however, its long visceral tracheae aerate organs situated medially from the flight muscles. Analysis of changes of the tracheal system volume enabled the calculation of growth scaling among body tissues and the volume of the tracheal system. The data presented show that the development of the body volume and tracheal system is not linear in holometabola due to the occurrence of the pupal stage causing a decrease in body volume in the imago and at the same time influencing high growth rates of the tracheal system during metamorphosis, exceeding that ones observed for hemimetabola.

Dual evolutionary origin of insect wings supported by an investigation of the abdominal wing serial homologs in Tribolium

The origin of insect wings is still a highly debated mystery in biology, despite the importance of this evolutionary innovation. There are currently two prominent, but contrasting wing origin hypotheses (the tergal origin hypothesis and the pleural origin hypothesis). Through studies in the Tribolium beetle, we have previously obtained functional evidence supporting a third hypothesis, the dual origin hypothesis. Although this hypothesis can potentially unify the two competing hypotheses, it requires further testing from various fields. Here, we investigated the genetic regulation of the tissues serially homologous to wings in the abdomen, outside of the appendage-bearing segments, in Tribolium We found that the formation of ectopic wings in the abdomen upon homeotic transformation relies not only on the previously identified abdominal wing serial homolog (gin-trap), but also on a secondary tissue in the pleural location. Using an enhancer trap line of nubbin (a wing lineage marker), we were able to visualize both of these two tissues (of tergal and pleural nature) contributing to form a complete wing. These results support the idea that the presence of two distinct sets of wing serial homologs per segment represents an ancestral state of the wing serial homologs, and can therefore further support a dual evolutionary origin of insect wings. Our analyses also uncovered detailed Hox regulation of abdominal wing serial homologs, which can be used as a foundation to elucidate the molecular mechanisms that have facilitated the evolution of bona fide insect wings, as well as the diversification of other wing serial homologs.

What serial homologs can tell us about the origin of insect wings

Although the insect wing is a textbook example of morphological novelty, the origin of insect wings remains a mystery and is regarded as a chief conundrum in biology. Centuries of debates have culminated into two prominent hypotheses: the tergal origin hypothesis and the pleural origin hypothesis. However, between these two hypotheses, there is little consensus in regard to the origin tissue of the wing as well as the evolutionary route from the origin tissue to the functional flight device. Recent evolutionary developmental (evo-devo) studies have shed new light on the origin of insect wings. A key concept in these studies is “serial homology”. In this review, we discuss how the wing serial homologs identified in recent evo-devo studies have provided a new angle through which this century-old conundrum can be explored. We also review what we have learned so far from wing serial homologs and discuss what we can do to go beyond simply identifying wing serial homologs and delve further into the developmental and genetic mechanisms that have facilitated the evolution of insect wings.

Tergal and pleural structures contribute to the formation of ectopic prothoracic wings in cockroaches

Wings were a fundamental morphological innovation for the adaptive radiation of insects, the most diversified group among all animals. Pterygote insects have two pairs of wings, the mesothoracic (T2) forewings and the metathoracic (T3) hindwings, whereas the prothorax (T1) is wingless. Using RNA interference approaches, we have found that the gene Sex combs reduced (Scr) determines the wingless identity of T1 in the cockroach Blattella germanica. Interference of Scr triggers the formation of ectopic wing structures in T1, which are formed from the expansion of the latero-posterior region of the pronotum, along with a contribution of the epimeron, a pleurite of T1. These data support the theory of a dual origin for insect wings, from pronotal (tergal origin theory) and pleural (pleural origin theory) structures and genes.

Exploring the origin of insect wings from an evo-devo perspective

Although insect wings are often used as an example of morphological novelty, the origin of insect wings remains a mystery and is regarded as a major conundrum in biology. Over a century of debates and observations have culminated in two prominent hypotheses on the origin of insect wings: the tergal hypothesis and the pleural hypothesis. However, despite accumulating efforts to unveil the origin of insect wings, neither hypothesis has been able to surpass the other. Recent investigations using the evolutionary developmental biology (evo-devo) approach have started shedding new light on this century-long debate. Here, we review these evo-devo studies and discuss how their findings may support a dual origin of insect wings, which could unify the two major hypotheses.

Origin and diversification of wings: Insights from a neopteran insect

Winged insects underwent an unparalleled evolutionary radiation, but mechanisms underlying the origin and diversification of wings in basal insects are sparsely known compared with more derived holometabolous insects. In the neopteran species Oncopeltus fasciatus, we manipulated wing specification genes and used RNA-seq to obtain both functional and genomic perspectives. Combined with previous studies, our results suggest the following key steps in wing origin and diversification. First, a set of dorsally derived outgrowths evolved along a number of body segments including the first thoracic segment (T1). Homeotic genes were subsequently co-opted to suppress growth of some dorsal flaps in the thorax and abdomen. In T1 this suppression was accomplished by Sex combs reduced, that when experimentally removed, results in an ectopic T1 flap similar to prothoracic winglets present in fossil hemipteroids and other early insects. Global gene-expression differences in ectopic T1 vs. T2/T3 wings suggest that the transition from flaps to wings required ventrally originating cells, homologous with those in ancestral arthropod gill flaps/epipods, to migrate dorsally and fuse with the dorsal flap tissue thereby bringing new functional gene networks; these presumably enabled the T2/T3 wing's increased size and functionality. Third, "fused" wings became both the wing blade and surrounding regions of the dorsal thorax cuticle, providing tissue for subsequent modifications including wing folding and the fit of folded wings. Finally, Ultrabithorax was co-opted to uncouple the morphology of T2 and T3 wings and to act as a general modifier of hindwings, which in turn governed the subsequent diversification of lineage-specific wing forms.

Recent developments in the study of insect flight

Here we review recent contributions to the study of insect flight, in particular those brought about by advances in experimental techniques. We focus particularly on the following areas: wing flexibility and deformation, the physiology and biophysics of asynchronous insect flight muscle, the aerodynamics of flight, and stability and maneuverability. This recent research reveals the importance of wing flexibility to insect flight, provides a detailed model of how asynchronous flight muscle functions and how it may have evolved, synthesizes many recent studies of insect flight aerodynamics into a broad-reaching summary of unsteady flight aerodynamics, and highlights new insights into the sources of flight stability in insects. The focus on experimental techniques and recently developed apparatus shows how these advancements have occurred and point the way towards future experiments.

Molecular developmental evidence for a subcoxal origin of pleurites in insects and identity of the subcoxa in the gnathal appendages

Pleurites are chitinous plates in the body wall of insects and myriapods. They are believed to be an adaptation to locomotion on land but their developmental and evolutionary origins are unclear. A widely endorsed explanation for their origin is through toughening pre-existing parts of the body wall; in contrast, the subcoxal theory suggests pleurites derive from a redeployment of the proximal-most section of the leg, the subcoxa. Here, by studying expression of appendage patterning genes in embryos and larvae of the beetle Tribolium castaneum, we provide the first molecular evidence for the existence of a cryptic subcoxal segment in developing legs. We follow this structure during development and show that the embryonic subcoxa later forms the pleurites of the larva as predicted by the subcoxal theory. Our data also demonstrate that subcoxal segments are present in all post-antennal appendages, including the first molecular evidence of a two-segmented mandible with a subcoxal segment in insects.

The making of an octopus arm

BACKGROUND

Most of our current findings on appendage formation and patterning stem from studies on chordate and ecdysozoan model organisms. However, in order to fully understand the evolution of animal appendages, it is essential to include information on appendage development from lophotrochozoan representatives. Here, we examined the basic dynamics of the Octopus vulgaris arm's formation and differentiation - as a highly evolved member of the lophotrochozoan super phylum - with a special focus on the formation of the arm's musculature.

RESULTS

The octopus arm forms during distinct phases, including an early outgrowth from an epithelial thickening, an elongation, and a late differentiation into mature tissue types. During early arm outgrowth, uniform proliferation leads to the formation of a rounded bulge, which subsequently elongates along its proximal-distal axis by means of actin-mediated epithelial cell changes. Further differentiation of all tissue layers is initiated but end-differentiation is postponed to post-hatching stages. Interestingly, muscle differentiation shows temporal differences in the formation of distinct muscle layers. Particularly, first myocytes appear in the area of the future transverse prior to the longitudinal muscle layer, even though the latter represents the more dominant muscle type at hatching stage. Sucker rudiments appear as small epithelial outgrowths with a mesodermal and ectodermal component on the oral part of the arm. During late differentiation stages, cell proliferation becomes localized to a distal arm region termed the growth zone of the arm.

CONCLUSIONS

O. vulgaris arm formation shows both, similarities to known model species as well as species-specific patterns of arm formation. Similarities include early uniform cell proliferation and actin-mediated cell dynamics, which lead to an elongation along the proximal-distal axis. Furthermore, the switch to an adult-like progressive distal growth mode during late differentiation stages is reminiscent of the vertebrate progress zone. However, tissue differentiation shows a species-specific delay, which is correlated to a paralarval pelagic phase after hatching and concomitant emerging behavioral modifications. By understanding the general dynamics of octopus arm formation, we established a basis for further studies on appendage patterning, growth, and differentiation in a representative of the lophotrochozoan super phylum.

The Last Breath: A μCT-based method for investigating the tracheal system in Hexapoda

In recent years, μCT-based studies of the insect tracheal system have become an increasingly important area of research. Nevertheless, the methods proposed in previous research for investigating the respiratory system in the three-dimensional space were described and tested based on a relatively small number of specimens. Additionally, the individuals studied in all these cases represented only a single post-embryonic stadium - pupa or imago - of a particular insect species. Therefore, in the current situation it is difficult to predict the reliability and possible limitations of these methods. To address this problem we conducted a methodological study, during which we used 65 individuals representing larvae, pupae and imagines of the mealworm beetle (Tenebrio molitor). In addition to the protocol previously described, which implicated freezing as a killing technique, we also tested a novel one, which was based on ethyl acetate fumigation of the specimens studied. We included step-by-step guides for the manual and semiautomatic approaches in order to facilitate the digital visualization of the tracheal system. Our investigations enabled us to generate multiple models of the tracheal system of all post-embryonic stages of the mealworm beetle. The methods used proved to be minimally invasive, thus allowing for the application of post-scanning manipulations, such as drying with critical point dryer (CPD). This approach enabled us to merge different three-dimensional models into a single picture and analyse the relationship of the tracheal system with other tissues (e.g., muscles, nervous system). We comprehensively discuss the advantages and possible limitations of the tested methods and provide practical suggestions for conducting the analyses on a wider scale. The visualizations presented in this publication are the first three-dimensional models of the respiratory system using a representative of the extremely diverse order Coleoptera.

RNAi screening of developmental toolkit genes: a search for novel wing genes in the red flour beetle, Tribolium castaneum

The amazing array of diversity among insect wings offers a powerful opportunity to study the mechanisms guiding morphological evolution. Studies in Drosophila (the fruit fly) have identified dozens of genes important for wing development. These genes are often called candidate genes, serving as an ideal starting point to study wing development in other insects. However, we also need to explore beyond the candidate genes to gain a more comprehensive view of insect wing evolution. As a first step away from the traditional candidate genes, we utilized Tribolium (the red flour beetle) as a model and assessed the potential involvement of a group of developmental toolkit genes (embryonic patterning genes) in beetle wing development. We hypothesized that the highly pleiotropic nature of these developmental genes would increase the likelihood of finding novel wing genes in Tribolium. Through the RNA interference screening, we found that Tc-cactus has a less characterized (but potentially evolutionarily conserved) role in wing development. We also found that the odd-skipped family genes are essential for the formation of the thoracic pleural plates, including the recently discovered wing serial homologs in Tribolium. In addition, we obtained several novel insights into the function of these developmental genes, such as the involvement of mille-pattes and Tc-odd-paired in metamorphosis. Despite these findings, no gene we examined was found to have novel wing-related roles unique in Tribolium. These results suggest a relatively conserved nature of developmental toolkit genes and highlight the limited degree to which these genes are co-opted during insect wing evolution.

Complete mitochondrial genome of yellow meal worm (Tenebrio molitor)

The yellow meal worm (Tenebrio molitor L.) is an important resource insect typically used as animal feed additive. It is also widely used for biological research. The first complete mitochondrial genome of T. molitor was determined for the first time by long PCR and conserved primer walking approaches. The results showed that the entire mitogenome of T. molitor was 15 785 bp long, with 72.35% A+T content [deposited in GenBank with accession number KF418153]. The gene order and orientation were the same as the most common type suggested as ancestral for insects. Two protein-coding genes used atypical start codons (CTA in ND2 and AAT in COX1), and the remaining 11 protein-coding genes started with a typical insect initiation codon ATN. All tRNAs showed standard clover-leaf structure, except for tRNA(Ser) (AGN), which lacked a dihydrouridine (DHU) arm. The newly added T. molitor mitogenome could provide information for future studies on yellow meal worm.

Insights into the molecular mechanisms underlying diversified wing venation among insects

Insect wings are great resources for studying morphological diversities in nature as well as in fossil records. Among them, variation in wing venation is one of the most characteristic features of insect species. Venation is therefore, undeniably a key factor of species-specific functional traits of the wings; however, the mechanism underlying wing vein formation among insects largely remains unexplored. Our knowledge of the genetic basis of wing development is solely restricted to Drosophila melanogaster. A critical step in wing vein development in Drosophila is the activation of the decapentaplegic (Dpp)/bone morphogenetic protein (BMP) signalling pathway during pupal stages. A key mechanism is the directional transport of Dpp from the longitudinal veins into the posterior crossvein by BMP-binding proteins, resulting in redistribution of Dpp that reflects wing vein patterns. Recent works on the sawfly Athalia rosae, of the order Hymenoptera, also suggested that the Dpp transport system is required to specify fore- and hindwing vein patterns. Given that Dpp redistribution via transport is likely to be a key mechanism for establishing wing vein patterns, this raises the interesting possibility that distinct wing vein patterns are generated, based on where Dpp is transported. Experimental evidence in Drosophila suggests that the direction of Dpp transport is regulated by prepatterned positional information. These observations lead to the postulation that Dpp generates diversified insect wing vein patterns through species-specific positional information of its directional transport. Extension of these observations in some winged insects will provide further insights into the mechanisms underlying diversified wing venation among insects.

Genomic correlates of relationship QTL involved in fore- versus hind limb divergence in mice

Divergence of serially homologous elements of organisms is a common evolutionary pattern contributing to increased phenotypic complexity. Here, we study the genomic intervals affecting the variational independence of fore- and hind limb traits within an experimental mouse population. We use an advanced intercross of inbred mouse strains to map the loci associated with the degree of autonomy between fore- and hind limb long bone lengths (loci affecting the relationship between traits, relationship quantitative trait loci [rQTL]). These loci have been proposed to interact locally with the products of pleiotropic genes, thereby freeing the local trait from the variational constraint due to pleiotropic mutations. Using the known polymorphisms (single nucleotide polymorphisms [SNPs]) between the parental strains, we characterized and compared the genomic regions in which the rQTL, as well as their interaction partners (intQTL), reside. We find that these two classes of QTL intervals harbor different kinds of molecular variation. SNPs in rQTL intervals more frequently reside in limb-specific cis-regulatory regions than SNPs in intQTL intervals. The intQTL loci modified by the rQTL, in contrast, show the signature of protein-coding variation. This result is consistent with the widely accepted view that protein-coding mutations have broader pleiotropic effects than cis-regulatory polymorphisms. For both types of QTL intervals, the underlying candidate genes are enriched for genes involved in protein binding. This finding suggests that rQTL effects are caused by local interactions among the products of the causal genes harbored in rQTL and intQTL intervals. This is the first study to systematically document the population-level molecular variation underlying the evolution of character individuation.

Wing serial homologs and the origin and evolution of the insect wing

The origin and evolution of insect wings has been the subject of extensive debate. The issue has remained controversial largely because of the absence of definitive fossil evidence or direct developmental evidence of homology between wings and a putative wing origin. Recent identification of wing serial homologs (WSHs) has provided researchers with a potential strategy for identifying WSHs in other species. Future comparative developmental analyses between wings and WSHs may clarify the important steps underlying the evolution of insect wings.

Insights into insect wing origin provided by functional analysis of vestigial in the red flour beetle, Tribolium castaneum

Despite accumulating efforts to unveil the origin of insect wings, it remains one of the principal mysteries in evolution. Currently, there are two prominent models regarding insect wing origin: one connecting the origin to the paranotal lobe and the other to the proximodorsal leg branch (exite). However, neither hypothesis has been able to surpass the other. To approach this conundrum, we focused our analysis on vestigial (vg), a critical wing gene initially identified in Drosophila. Our investigation in Tribolium (Coleoptera) has revealed that, despite the well-accepted view of vg as an essential wing gene, there are two groups of vg-dependent tissues in the "wingless" first thoracic segment (T1). We show that one of these tissues, the carinated margin, also depends on other factors essential for wing development (such as Wingless signal and apterous), and has nubbin enhancer activity. In addition, our homeotic mutant analysis shows that wing transformation in T1 originates from both the carinated margin and the other vg-dependent tissue, the pleural structures (trochantin and epimeron). Intriguingly, these two tissues may actually be homologous to the two proposed wing origins (paranotal lobes and exite bearing proximal leg segments). Therefore, our findings suggest that the vg-dependent tissues in T1 could be wing serial homologs present in a more ancestral state, thus providing compelling functional evidence for the dual origin of insect wings.