Elucidating the effects of isoelectronic atomic substitution on the excited-state dynamics and reactivity of aromatic compounds

Photochemistry of aromatic compounds has attracted significant interest for their distinctive excited-state behavior and potential applications as energy materials. Isoelectronic atomic substitution, which involves replacing ring atoms while maintaining the same number of electrons in aromatic compounds (e.g., from C-C to B-N), offers a promising strategy for modulating these properties by tuning electronic structures. However, a fundamental understanding of its effect on the excited-state dynamics and reactivity remains elusive. In this study, we investigate the photochemical properties of oxaborine, using benzene and azaborine as references, to elucidate the effects of isoelectronic atomic substitution. Potential energy surface (PES) calculations reveal that oxaborine undergoes barrierless ring distortion toward S1/S0 conical intersection (CI), followed by barrierless Dewar isomerization directly from the S1/S0 CI. Using nonadiabatic molecular dynamics simulations, we observe a rapid S1 decay time (125 fs) and a notably high Dewar isomerization yield (23.3%), consistent with the results of PES calculations, highlighting the unique photochemical properties of oxaborine. Orbital-level analysis reveals that atomic substitution breaks the π orbital degeneracy and destabilizes the S1 state, explaining the much faster S1 decay for azaborine and oxaborine. The p orbital energy modulations from O-B or N-B substitution weaken the meta-bridge bond while enhancing para-bridge C-C interactions, favoring Dewar isomerization. These findings offer a comprehensive understanding of the effect of isoelectronic atomic substitution in aromatic compounds and demonstrate its potential as a design strategy for controlling photochemical properties.

Design and Combinatorial Synthesis of Biomimetic Multivariate Metal-Organic Frameworks for Efficient Drug Loading

Multivariate metal-organic frameworks (MOFs) covering diverse iso-reticular materials while encompassing tunable function through the spatial composition of the organic functional groups are an excellent starting point for developing sequence-dependent materials. There remains a demand for synthesizing an extensive library of multivariate MOFs for function-targeted selection, similar to the process of directed evolution in improving the function of proteins by selecting the best mutant from a large mutant library. The design of biomimetic multivariate MOFs (bMTV-MOFs) is reported that incorporate the panel of functionality presented in amino acids to enable the complexity and adjustability of proteins to the structure of MOFs. A total of 1089 MOFs, ranging from single-component to multivariate structures, are synthesized in a combinatorial manner for the delivery of the verteporfin, a photosensitive drug. Tertiary bMTV-MOFs demonstrated superiority in the adsorption and release of verteporfin. In vitro studies on various cancer cell lines demonstrated a 23 to 68-fold enhancement in efficacy for photodynamic therapy using the privileged A1F6H3 or A3D1H6 bMTV-MOFs over pristine MOFs.

Highly Crystalline and Robust Donor-Acceptor Type Covalent Organic Frameworks for Long-life Sodium-Ion Battery Cathodes

Covalent organic frameworks (COFs) hold great potential in sodium-ion battery cathodes. However, most reported COF-based electrodes show unsatisfying capacity and rate performance due to their limited redox site density, low crystallinity, and poor conductivity. Herein, a highly crystalline and robust donor-acceptor type COF with abundant redox active sites is developed by the polymerization of donor unit benzo[1,2-b:3,4-b″:5,6-b″']trithiophene-2,5,8-tricarbaldehyde) (BTT) and acceptor unit s-indacene-1,3,5,7(2H,6H)-tetrone (ICTO) (denoted as BTT-ICTO) for cathodic Na+ storage. The BTT-ICTO-graphene composites (BTT-ICTO@G) synthesized by in situ growth have a loose sheet structure with rough surfaces, contributing to the improved conductivity and active site utilization of BTT-ICTO. Benefiting from the robustness of BTT-ICTO linked by ethylene bonds, the BTT-ICTO@G cathodes exhibit a high capacity of 325 mAh g-1 at 0.1 A g-1 with a high active site utilization of 80%, excellent rate performance of 190 mAh g-1 at 5.0 A g-1, and exceptional cycle performances of 196 mAh g-1 over 10 000 cycles at 2.0 A g-1 with only 0.0015% decay per cycle. These properties make the BTT-ICTO@G cathodes among the best-reported COF-based sodium-ion battery cathodes. In addition, in situ Raman, ex situ Fourier transform infrared, and theoretical calculations disclose the reaction pathway of Na+ storage.

Multivariate Metal-Organic Framework-5 with 36 Different Linkers

We synthesized a series of multivariate metal-organic frameworks (MTV-MOFs) containing 36 different organic linkers with 27 unique functionalities. The functionalities present on the linkers include amine, nitro, halide, naphthalene, alkyne, alkene, alkane, ether, phenyl, pyridine, thiophene, and amide groups. These MTV-MOFs were characterized by powder X-ray diffraction to ensure the MOF-5 connectivity forms, solution-state nuclear magnetic resonance to calculate the final linker incorporations, thermogravimetric analysis to confirm the organic component of the framework, and nitrogen sorption isotherms to measure the porosity and calculate the BET surface areas of each MTV-MOF. Each linker was found to make up between 0.07 and 6.64% of the linkers in the structure, with the total framework mass consisting of 74.8-75.1% linker molecules, compared to 63.9% for the linkers in MOF-5. BET surface areas up to 1,755 m2/g were observed with 36 linkers present compared to 3,380 m2/g in MOF-5. Thirty-four of the 36 linkers had linear correlations between the starting ratio and final incorporation, indicating interactions between linkers do not heavily influence the incorporation of other linkers into the final structure.

Uniform single-crystal mesoporous metal-organic frameworks

The synthesis of mesoporous metal-organic frameworks (meso-MOFs) is desirable as these materials can be used in various applications. However, owing to the imbalance in structural tension at the micro-scale (MOF crystallization) and the meso-scales (assembly of micelles with MOF subunits), the formation of single-crystal meso-MOFs is challenging. Here we report the preparation of uniform single-crystal meso-MOF nanoparticles with ordered mesopore channels in microporous frameworks with definite arrangements, through a cooperative assembly method co-mediated by strong and weak acids. These nanoparticles feature a truncated octahedron shape with variable size and well-defined two-dimensional hexagonally structured (p6mm) columnar mesopores. Notably, the match between the crystallization kinetics of MOFs and the assembly kinetics of micelles is critical for forming the single-crystal meso-MOFs. On the basis of this strategy, we have constructed a library of meso-MOFs with tunable large pore sizes, controllable mesophases, various morphologies and multivariate components.

Topological Transformation and Dimensional Reduction in Multicomponent Metal-Organic Frameworks for Gas Separations

Multicomponent MOFs have offered a wide range of opportunities to harness new properties. However, the synthesis of multicomponent MOFs remains challenging. This work demonstrates the synthesis of a family of multicomponent MOFs by topological transformation from well-established multicomponent partitioned acs (pacs) structures. Such transformation is based on the new understanding on the self-assembly process of pacs MOFs. A key to this understanding is that pacs structures, topologically regarded as the introduction of a pore-partitioning ligand into MOF-235/MIL-88 type framework, are likely to be formed in a layer-pillar-layer fashion in practical reactions. As the π-π interaction between layers and other chemical interactions during the self-assembly process are recognized, the structural transformation can be modulated from 3D pacs structures to 2D interrupted pacs structures (denoted i-pacs). It is especially noteworthy that such dimensional reduction is first observed in metal-organic frameworks and the i-pacs MOFs contain four structural modules and up to five components, which have the highest complexity among 2D MOFs. Interestingly, the i-pacs MOFs have significantly enhanced performance for CO2/N2 separation in comparison with pacs MOFs.

Multivariate Flexible Metal-Organic Frameworks and Covalent Organic Frameworks

Precise control of the void environment, achieved through multiple functional groups and enhanced by structural adaptations to guest molecules, stands at the forefront of scientific inquiry. Flexible multivariate open framework materials (OFMs), including covalent organic frameworks and metal-organic frameworks, meet these criteria and are expected to play a crucial role in gas storage and separation, pollutant removal, and catalysis. Nevertheless, there is a notable lack of critical evaluation of achievements in their chemistry and future prospects for their development or implementation. To provide a comprehensive historical context, the initial discussion explores into the realm of "classical" flexible OFMs, where their origin, various modes of flexibility, similarities to proteins, advanced tuning methods, and recent applications are explored. Subsequently, multivariate flexible materials, the methodologies involved in their synthesis, and horizons of their application are focussed. Furthermore, the reader to the concept of spatial distribution is introduced, providing a brief overview of the latest reports that have contributed to its elucidation. In summary, the critical review not only explores the landscape of multivariate flexible materials but also sheds light on the obstacles that the scientific community must overcome to fully unlock the potential of this fascinating field.

Ligand solid-solution tuning of magnetic and mechanical properties of the van der Waals metal-organic magnet NiCl2(btd)1-x(bod)x

Van der Waals (vdW) magnets offer unique opportunities for exploring magnetism in the 2D limit. Metal-organic magnets (MOM) are of particular interest as the functionalisation of organic ligands can control their physical properties. Here, we demonstrate tuning of mechanical and magnetic function of a noncollinear vdW ferromagnet, NiCl2(btd) (btd = 2,1,3-benzothiadiazole), through creating solid-solutions with the oxygen-substituted analogue ligand 2,1,3-benzoxadiazole (bod). We synthesise NiCl2(btd)1-x(bod)x up to x = 0.33, above which we find mixtures primarily composed of 1D NiCl2(bod)2. Magnetometry reveals bod incorporation reduces the coercivity significantly (up to 60%), without altering the ordering temperatures. High pressure synchrotron diffraction measurements up to 0.4 GPa demonstrate that the stiffest axis is the b axis, through the Ni-N-(O/S)-N-Ni bonds, and the softest is the interlayer direction. Doping with bod fine-tunes this compressibility, softening the layers, but stiffening the interlayer axis. This demonstrates that substitution of organic ligands in vdW MOMs can be used to realise targeted magnetic and mechanical properties.

Steering diffusion selectivity of chemical isomers within aligned nanochannels of metal-organic framework thin film

The movement of molecules (i.e. diffusion) within angstrom-scale pores of porous materials such as metal-organic frameworks (MOFs) and zeolites is influenced by multiple complex factors that can be challenging to assess and manipulate. Nevertheless, understanding and controlling this diffusion phenomenon is crucial for advancing energy-economic membrane-based chemical separation technologies, as well as for heterogeneous catalysis and sensing applications. Through precise assessment of the factors influencing diffusion within a porous metal-organic framework (MOF) thin film, we have developed a chemical strategy to manipulate and reverse chemical isomer diffusion selectivity. In the process of cognizing the molecular diffusion within oriented, angstrom-scale channels of MOF thin film, we have unveiled a dynamic chemical interaction between the adsorbate (chemical isomers) and the MOF using a combination of kinetic mass uptake experiments and molecular simulation. Leveraging the dynamic chemical interactions, we have reversed the haloalkane (positional) isomer diffusion selectivity, forging a chemical pathway to elevate the overall efficacy of membrane-based chemical separation and selective catalytic reactions.

Leveraging Ligand Steric Demand to Control Ligand Exchange and Domain Composition in Stratified Metal-Organic Frameworks

Incorporating diverse components into metal-organic frameworks (MOFs) can expand their scope of properties and applications. Stratified MOFs (sMOFs) consist of compositionally unique concentric domains (strata), offering unprecedented complexity through partitioning of structural and functional components. However, the labile nature of metal-ligand coordination handicaps achieving compositionally distinct domains due to ligand exchange reactions occurring concurrently with secondary strata growth. To achieve complex sMOF compositions, characterizing and controlling the competing processes of new strata growth and ligand exchange are vital. This work systematically examines controlling ligand exchange in UiO-67 sMOFs by tuning ligand sterics. We present quantitative methods for assessing and visualizing the outcomes of strata growth and ligand exchange that rely on high-angle annular dark-field images and elemental mapping via scanning transmission electron microscopy-energy dispersive X-ray spectroscopy. In addition, we leverage ligand sterics to create 'blocking layers' that minimize ligand exchange between strata which are particularly susceptible to ligand exchange and inter-strata ligand mixing. Finally, we evaluate strata compositional integrity in various solvents and find that sMOFs can maintain their compositions for >12 months in some cases. Collectively, these studies and methods enhance understanding and control over ligand placement in multi-domain MOFs, factors that underscore careful tunning of properties and function.

Sulfur-Functionalized Single-Walled Carbon Nanotube Buckypaper/MTV-BioMetal-Organic Framework Nanocomposites for Gold Recovery

Developing sustainable, efficient, and selective gold recovery technology is essential to implement the valorization of complementary alternative sources for this precious metal, such as spent e-waste, and to preserve the environment. The main challenge in recovering gold from liquors obtained from leached waste electronics is the low concentration of this precious metal compared to impurities. Here, we report the preparation of a novel multivariate biological metal-organic framework (MTV-BioMOF) as a potential material for the selective recovery of gold metal ions from water, even in the presence of other interfering metals. Moreover, MTV-BioMOF can be incorporated within single-walled carbon nanotube buckypapers (SWCNT-BP) to yield an MTV-BioMOF@HS-SWCNT-BP composite, which combines enhanced mechanical properties and high chemical stability. The thiol-functionalized SWCNT-BP surface and the presence of thioether groups evenly decorating the MTV-BioMOF channels shape a task-specific functional environment that boosts the interactions with gold metal ions. The efficiency of gold recovery reaches values up to 99.5% when MTV-BioMOF@SWCNT-BP is used as an adsorbent for treating Au(III) in very diluted solutions (initial concentration of 5 ppm). This high recovery efficiency, with values as high as 98.0%, is maintained even in the presence of competing metal cations, also demonstrating a noticeable selectivity. This composite material represents a promising paradigm for the selective extraction, enrichment, and purification of gold.

Biomimetic functionalized metal organic frameworks as multifunctional agents: Paving the way for cancer vaccine advances

Biomimetic functionalized metal-organic frameworks (Fn-MOFs) represent a cutting-edge approach in the realm of cancer vaccines. These multifunctional agents, inspired by biological systems, offer unprecedented opportunities for the development of next-generation cancer vaccines. The vast surface area, tunable pore size, and diverse chemistry of MOFs provide a versatile scaffold for the encapsulation and protection of antigenic components, crucial for vaccine stability and delivery. This work delves into the innovative design and application of Fn-MOFs, highlighting their role as carriers for immune enhancement and their potential to revolutionize vaccine delivery. By mimicking natural processes, Fn-MOFs, with their ability to be functionalized with a myriad of chemical and biological entities, exhibit superior biocompatibility and stimuli-responsive behavior and facilitate targeted delivery to tumor sites. This review encapsulates the latest advancements in Fn-MOF technology, from their synthesis and surface modification to their integration into stimuli-responsive and combination therapies. It underscores the significance of biomimetic approaches in overcoming current challenges in cancer vaccine development, such as antigen stability and immune evasion. By leveraging the biomimetic nature of Fn-MOFs, this work paves the way for innovative strategies in cancer vaccines, aiming to induce potent and long-lasting immune responses against malignancies.

Ordered assembly of two different metal clusters with the same topological connectivity in one single coordination network

The introduction of heterogeneous components within one single coordination network leads to the multifunctionality of the final material. However, it is hard to precisely control the local distribution of these different components in such a coordination network, especially for different components with identical topological connectivity. In this study, we successfully achieved the ordered assembly of [Mn3(μ3-O)] nodes and [Mn6(μ3-O)2(CH3COO)3] nodes within one pacs coordination network. The resulting new structure (NPU-6) with heterogeneous metal nodes simultaneously inherits the advantages of both parent networks (good thermal stability and high pore volume). The significant effect of the reaction concentration of competing ligand CH3COO- on the mixed assembly of these two nodes in NPU-6 is revealed by a series of control experiments. This method is anticipated to offer a valuable reference for orderly assembling heterogeneous components in coordination networks.

Encoding ordered structural complexity to covalent organic frameworks

Installing different chemical entities onto crystalline frameworks with well-defined spatial distributions represents a viable approach to achieve ordered and complex synthetic materials. Herein, a covalent organic framework (COF-305) is constructed from tetrakis(4-aminophenyl)methane and 2,3-dimethoxyterephthalaldehyde, which has the largest unit cell and asymmetric unit among known COFs. The ordered complexity of COF-305 is embodied by nine different stereoisomers of its constituents showing specific sequences on topologically equivalent sites, which can be attributed to its building blocks deviating from their intrinsically preferred simple packing geometries in their molecular crystals to adapt to the framework formation. The insight provided by COF-305 supplements the principle of covalent reticular design from the perspective of non-covalent interactions and opens opportunities for pursuing complex chemical sequences in molecular frameworks.

Unraveling the molecular mechanism for enhanced gas adsorption in mixed-metal MOFs via solid-state NMR spectroscopy

The incorporation of multiple metal ions in metal-organic frameworks (MOFs) through one-pot synthesis can induce unique properties originating from specific atomic-scale spatial apportionment, but the extraction of this crucial information poses challenges. Herein, nondestructive solid-state NMR spectroscopy was used to discern the atomic-scale metal apportionment in a series of bulk Mg1-xCox-MOF-74 samples via identification and quantification of eight distinct arrangements of Mg/Co ions labeled with a 13C-carboxylate, relative to Co content. Due to the structural characteristics of metal-oxygen chains, the number of metal permutations is infinite for Mg1-xCox-MOF-74, making the resolution of atomic-scale metal apportionment particularly challenging. The results were then employed in density functional theory calculations to unravel the molecular mechanism underlying the macroscopic adsorption properties of several industrially significant gases. It is found that the incorporation of weak adsorption sites (Mg2+ for CO and Co2+ for CO2 adsorption) into the MOF structure counterintuitively boosts the gas adsorption energy on strong sites (Co2+ for CO and Mg2+ for CO2 adsorption). Such effect is significant even for Co2+ remote from Mg2+ in the metal-oxygen chain, resulting in a greater enhancement of CO adsorption across a broad composition range, while the enhancement of CO2 adsorption is restricted to Mg2+ with adjacent Co2+. Dynamic breakthrough measurements unambiguously verified the trend in gas adsorption as a function of metal composition. This research thus illuminates the interplay between atomic-scale structures and macroscopic gas adsorption properties in mixed-metal MOFs and derived materials, paving the way for developing superior functional materials.

Electron and Spin Delocalization in [Co6 Se8 (PEt3 )6 ]0/+1 Superatoms

Molecular clusters can function as nanoscale atoms/superatoms, assembling into superatomic solids, a new class of solid-state materials with designable properties through modifications on superatoms. To explore possibilities on diversifying building blocks, here we thoroughly studied one representative superatom, Co6 Se8 (PEt3 )6 . We probed its structural, electronic, and magnetic properties and revealed its detailed electronic structure as valence electrons delocalize over inorganic [Co6 Se8 ] core while ligands function as an insulated shell. 59 Co SSNMR measurements on the core and 31 P, 13 C on the ligands show that the neutral Co6 Se8 (PEt3 )6 is diamagnetic and symmetric, with all ligands magnetically equivalent. Quantum computations cross-validate NMR results and reveal degenerate delocalized HOMO orbitals, indicating aromaticity. Ligand substitution keeps the inorganic core nearly intact. After losing one electron, the unpaired electron in [Co6 Se8 (PEt3 )6 ]+1 is delocalized, causing paramagnetism and a delocalized electron spin. Notably, this feature of electron/spin delocalization over a large cluster is attractive for special single-electron devices.

Mixed-Linker Chiral 2D Covalent Organic Frameworks with Controlled Layer Stacking for Electrochemical Asymmetric Catalysis

Covalent organic frameworks (COFs) have undergone extensive research as heterogeneous catalysts for a wide range of significant reactions, but they have not yet been investigated in the realm of electrochemical asymmetric catalysis, despite their recognition as an economical and sustainable strategy for producing enantiopure compounds. Here, we report a mixed-linker strategy to design multicomponent two-dimensional (2D) chiral COFs with tunable layer stacking for highly enantioselective electrocatalysis. By crystallizing mixtures of triamines with and without the MacMillan imidazolidinone catalyst or aryl substituent (ethyl and isopropyl) and a dialdehyde derivative of thieno-[3,2-b]thiophene, we synthesized and structurally characterized a series of three-component homochiral 2D COFs featuring either AA or ABC stacking. The stacking modes that can be synthetically controlled through steric tuning using different aryl substituents affect their chemical stability and electrochemical performance. With the MacMillan catalyst periodically appended on their channels, all three COFs with conductive thiophene moieties can be highly enantioselective and recyclable electrocatalysts for the asymmetric α-arylation of aldehydes, affording alkylated anilines with up to 97% enantiomeric excess by an anodic oxidation/organocatalytic protocol. Presumably due to their higher charge transfer ability, the ABC stacking COFs exhibit improved reactivity compared to the AA stacking analogue. This work therefore advances COFs as electrocatalysts for asymmetric catalysis and may facilitate the design of more redox-active crystalline organic polymers for electrochemical enantioselective processes.

Exceptionally Stable And Super-Efficient Electrocatalysts Derived From Semiconducting Metal Phosphonate Frameworks

Two new isostructural semiconducting metal-phosphonate frameworks are reported. Co2 [1,4-NDPA] and Zn2 [1,4-NDPA] (1,4-NDPA4- is 1,4-naphthalenediphosphonate) have optical bandgaps of 1.7 eV and 2.5 eV, respectively. The electrocatalyst derived from Co2 [1,4-NPDA] as a precatalyst generated a low overpotential of 374 mV in the oxygen evolution reaction (OER) with a Tafel slope of 43 mV dec-1 at a current density of 10 mA cm-2 in alkaline electrolyte (1 mol L-1 KOH), which is indicative of remarkably superior reaction kinetics. Benchmarking of the OER of Co2 [1,4-NPDA] material as a precatalyst coupled with nickel foam (NF) showed exceptional long-term stability at a current density of 50 mA cm-2 for water splitting compared to the state-of-the-art Pt/C/RuO2 @NF after 30 h in 1 mol L-1 KOH. In order to further understand the OER mechanism, the transformation of Co2 [1,4-NPDA] into its electrocatalytically active species was investigated.

High Mechanical Strength Alloy-like Minerals Prepared by Inorganic Ionic Co-cross-linking

Alloys often combine different metals to generate superior mechanical properties. However, it is challenging to prepare high mechanical strength minerals with similar strategies. Using calcium carbonate (CaC) and calcium phosphate (CaP) as examples, this work synthesizes a group of compounds with the chemical formulas Ca(CO3 )x (PO4 )2(1- x )/3 (0 < x < 1, CaCPs) by cross-linking ionic oligomers. Unlike mixtures, these CaCPs exhibit a single temperature for the phase transition from amorphous to crystallized CaC (calcite) and CaP (hydroxyapatite). By heat-induced synchronous crystallization, dual-phase CaC/CaP with continuous crystallized boundaries are resembled to alloy-like minerals (ALMs). The mechanical properties of the ALMs are adjusted by tailoring their chemical compositions to reach a hardness of 5.6 GPa, which exceed those of control calcite and hydroxyapatite samples by 430% and 260%, respectively. This strategy expands the chemical scope of inorganic materials and holds promise for preparing high-performance minerals.

Fine-Tuning X-Ray Sensitivity in Organic-Inorganic Hybrids via an Unprecedented Mixed-Ligand Strategy

Crystalline organic-inorganic hybrids, which exhibit colorimetric responses to ionizing radiation, have recently been recognized as promising alternatives to conventional X-ray dosimeters. However, X-ray-responsive organic-inorganic hybrids are scarce and the strategy to fine-tune their detection sensitivity remains elusive. Herein, an unprecedented mixed-ligand strategy is reported to modulate the X-ray detection efficacy of organic-inorganic hybrids. Deliberately blending the stimuli-responsive terpyridine carboxylate ligand (tpc- ) and the auxiliary pba- group with different ratios gives rise to two OD thorium-bearing clusters (Th-102 and Th-103) and a 1D coordination polymer (Th-104). Notably, distinct X-ray sensitivity is evident as a function of molar ratio of the tpc- ligand, following the trend of Th-102 > Th-103 > Th-104. Moreover, Th-102, which is exclusively built from the tpc- ligands with the highest degree of π-π interactions, exhibits the most sensitive radiochromic and fluorochromic responses toward X-ray with the lowest detection limit of 1.5 mGy. The study anticipates that this mixed-ligand strategy will be a versatile approach to tune the X-ray sensing efficacy of organic-inorganic hybrids.

Spectroscopically Visualizing the Evolution of Hydrogen-Bonding Interactions

Understanding chemical bond variations is the soul of chemistry as it is essential for any chemical process. The evolution of hydrogen bonds is one of the most fundamental and emblematic events during proton transfer; however, its experimental visualization remains a formidable challenge because of the transient timescales. Herein, by subtly regulating the proton-donating ability of distinct proton donors (zeolites or tungstophosphoric acid), a series of different hydrogen-bonding configurations were precisely manipulated. Then, an advanced two-dimensional (2D) heteronuclear correlation nuclear magnetic resonance (NMR) spectroscopic technique was utilized to simultaneously monitor the electronic properties of proton donors and acceptors (2-13C-acetone or trimethylphosphine oxide) through chemical shifts. Parabolic 1H-13C NMR relationships combined with single-well and double-well potential energy surfaces derived from theoretical simulations quantitatively identified the hydrogen bond types and allowed the evolution of hydrogen bonds to be visualized in diverse acid-base interaction complexes during proton transfer. Our findings provide a new perspective to reveal the nature and evolution of hydrogen bonds and confirm the superiority of 2D NMR techniques in identifying the subtle distinctions of various hydrogen-bonding configurations.

Multivariate metal-organic frameworks generated through post-synthetic modification: impact and future directions

Reticular chemistry has proven to be invaluable over time, thanks to the structural versatility, and tailored porosity observed in structures like metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and metal-organic polyhedra (MOPs). Despite the wide array of ligands and metals available for synthesizing MOFs, they are still somewhat constrained by the reliance on de novo conditions and the focus on generating MOFs with single ligand and metal. To surpass these limitations, researchers have established strategies to generate multivariate (MTV) MOF structures incorporating more than one ligand/metal into the crystal lattice. MTV-MOFs have demonstrated enhanced properties by virtue of the additional functionalities incorporated within their structures. One approach to developing MTV-MOFs is through post-synthetic modification (PSM), where new functionalities are introduced after the initial synthesis, thereby achieving the enhanced properties of MTV-MOFs even in cases where the new functionalities are incompatible with MOF synthesis.

Radiation-Induced De Novo Defects in Metal-Organic Frameworks Boost CO2 Sorption

Defects in metal-organic frameworks (MOFs) can significantly change their local microstructures, thus notably leading to an alteration-induced performance in sorption or catalysis. However, achieving de novo defect engineering in MOFs under ambient conditions without the scarification of their crystallinity remains a challenge. Herein, we successfully synthesize defective ZIF-7 through 60Co gamma ray radiation under ambient conditions. The obtained ZIF-7 is defect-rich but also has excellent crystallinity, enhanced BET surface area, and hierarchical pore structure. Moreover, the amount and structure of these defects within ZIF-7 were determined from the two-dimensional (2D) 13C-1H frequency-switched Lee-Goldburg heteronuclear correlation (FSLG-HETCOR) spectra, continuous rotation electron diffraction (cRED), and high-resolution transmission electron microscopy (HRTEM). Interestingly, the defects in ZIF-7 all strongly bind to CO2, leading to a remarkable enhancement of the CO2 sorption capability compared with that synthesized by the solvothermal method.

Unravelling the Molecular Structure and Confining Environment of an Organometallic Catalyst Heterogenized within Amorphous Porous Polymers

The catalytic activity of multifunctional, microporous materials is directly linked to the spatial arrangement of their structural building blocks. Despite great achievements in the design and incorporation of isolated catalytically active metal complexes within such materials, a detailed understanding of their atomic-level structure and the local environment of the active species remains a fundamental challenge, especially when these latter are hosted in non-crystalline organic polymers. Here, we show that by combining computational chemistry with pair distribution function analysis, 129 Xe NMR, and Dynamic Nuclear Polarization enhanced NMR spectroscopy, a very accurate description of the molecular structure and confining surroundings of a catalytically active Rh-based organometallic complex incorporated inside the cavity of amorphous bipyridine-based porous polymers is obtained. Small, but significant, differences in the structural properties of the polymers are highlighted depending on their backbone motifs.

Diamond rotors

The resolution of magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectra remains bounded by the spinning frequency, which is limited by the material strength of MAS rotors. Since diamond is capable of withstanding 1.5-2.5x greater MAS frequencies, compared to state-of-the art zirconia, we fabricated rotors from single crystal diamond. When combined with bearings optimized for spinning with helium gas, diamond rotors could achieve the highest MAS frequencies to date. Furthermore, the excellent microwave transmission properties and thermal conductivity of diamond could improve sensitivity enhancements in dynamic nuclear polarization (DNP) experiments. The fabrication protocol we report involves novel laser micromachining and produced rotors that presently spin at ωr/2π = 111.000 ± 0.004 kHz, with stable spinning up to 124 kHz, using N2 gas as the driving fluid. We present the first proton-detected 13C/15N MAS spectra recorded using diamond rotors, a critical step towards studying currently inaccessible ex-vivo protein samples with MAS NMR. Previously, the high aspect ratio of MAS rotors (∼10:1) precluded fabrication of MAS rotors from diamond.

Probing distribution and dynamics of lithium ions in supermolecule β-CD-PEO/Li+ solid polymer electrolytes via solid-state NMR

In this work, the distribution and dynamics of Li⁺ ions in β-CD-PEO/Li⁺ (β-CD, β-cyclodextrin; PEO, polyethylene-oxides) crystalline polymer electrolytes were investigated by solid-state NMR to enlighten the ionic conduction mechanism. Specifically, ⁷Li-⁶Li REDOR NMR and variable-contact-time ¹H-⁶Li CP/MAS NMR were adopted for the study. The results demonstrate that Li⁺ ions coordinated by polymer chains have relatively compact spatial density and fast dynamics, which facilitate the improvement of the electrochemical properties. Additionally, the variation of the distribution and dynamics of the Li⁺ ions and the ionic conduction mechanism were studied and discussed by altering the amount of the Li⁺ ions. This work deepens our understanding of the distribution and dynamics of Li⁺ ions in β-CD-PEO/Li⁺ crystals and demonstrates possible future applications of solid-state NMR on the study of the polymer electrolytes.

Constructing functional metal-organic frameworks by ligand design for environmental applications

Metal-organic frameworks (MOFs) with unique physical and chemical properties are composed of metal ions/clusters and organic ligands, including high porosity, large specific surface area, tunable structure and functionality, which have been widely used in chemical sensing, environmental remediation, and other fields. Organic ligands have a significant impact on the performance of MOFs. Selecting appropriate types, quantities and properties of ligands can well improve the overall performance of MOFs, which is one of the critical issues in the synthesis of MOFs. This article provides a comprehensive review of ligand design strategies for functional MOFs from the number of different types of organic ligands. Single-, dual- and multi-ligand design strategies are systematically presented. The latest advances of these functional MOFs in environmental applications, including pollutant sensing, pollutant separation, and pollutant degradation are further expounded. Furthermore, an outlook section of providing some insights on the future research problems and prospects of functional MOFs is highlighted with the purpose of conquering current restrictions by exploring more innovative approaches.

One-dimensional alignment of defects in a flexible metal-organic framework

Crystalline materials are often considered to have rigid periodic lattices, while soft materials are associated with flexibility and nonperiodicity. The continuous evolution of metal-organic frameworks (MOFs) has erased the boundaries between these two distinct conceptions. Flexibility, disorder, and defects have been found to be abundant in MOF materials with imperfect crystallinity, and their intricate interplay is poorly understood because of the limited strategies for characterizing disordered structures. Here, we apply advanced nuclear magnetic resonance spectroscopy to elucidate the mesoscale structures in a defective MOF with a semicrystalline lattice. We show that engineered defects can tune the degree of lattice flexibility by combining both ordered and disordered compartments. The one-dimensional alignment of correlated defects is the key for the reversible topological transition. The unique matrix is featured with both rigid framework of nanoporosity and flexible linkage of high swellability.

Effect of Spatial Heterogeneity on the Unusual Uptake Behavior of Multivariate-Metal-Organic Frameworks

The uniqueness of multivariate metal-organic frameworks (MTV-MOFs) has been widely explored to discover their unknown opportunities. While mesoscopic apportionments have been studied, macroscopic heterogeneity and its spatial effects remain unexplored in MTV-MOFs. In this study, we investigated the effect of macroscopic heterogeneity on MTV-MOFs on their uptake behaviors by comparing three types of MTV-MOFs having the functional groups in inner, outer, or entire parts of crystals. Their adsorption behavior for carbon dioxide (CO₂) and water (H₂O) brought out that functional groups located in the outer part of the crystals dominantly influence the sorption behavior of MTV-MOFs. These results are also visualized by observing iodine adsorption in the three types of MTV-MOFs using scanning transmission electron microscopy-electron energy loss spectroscopy. We believe that this finding provides new ways to decipher and design MTV-MOFs for their unusual properties.

Decoding complex order in reticular frameworks

Periodicity and aperiodicity coexist in a nonchaotic, information-rich crystal structure.

Statistical copolymer metal organic nanotubes

Metal-organic nanotubes (MONTs) are 1-dimensional crystalline porous materials that are formed from ligands and metals in a manner identical to more typical 3-dimensional metal-organic frameworks (MOFs). MONTs form anisotropically in one dimension making them excellent candidates for linker engineering for control of chemical composition and spacing. A novel series of MONTs was synthesized utilizing a mixture of 1,2,4-ditriazole ligands containing both a fully protonated aryl moiety and its tetrafluorinated analog in ratios of, 0 : 1, 1 : 4, 1 : 1, 4 : 1, and 1 : 0, respectively. All MONTs were characterized by both bulk and nanoscale measurements, including SCXRD, PXRD, ssNMR and TEM, to determine the resulting co-polymer architecture (alternating, block, or statistical) and the ligand ratios in the solid materials. All characterization methods point towards statistical copolymerization of the materials in a manner analogous to 3D MOFs, all of which notably could be achieved without destructive analytical methods.

Tuning Photoactive MIL-68(In) by Functionalized Ligands for Boosting Visible-Light Nitrogen Fixation

In this work, MIL-68(In) functionalized with various ligand substitutions including amine, hydroxyl, bromine, nitro, and methyl groups was prepared, via a one-pot solvothermal reaction for visible-light photocatalytic ammonia synthesis. The diversity of ligands tunes the morphology, geometry, pore environment, and electronic structure of MIL-68(In)-based photocatalysts due to the polarity and intraframework interactions. Amine-inserted MIL-68(In) outperforms its counterparts, presenting a boosted nitrogen photofixation rate of 140.34 μmol g_cat^-1 h^-1 with an apparent quantum efficiency of 5.69% at 420 nm. Further, the size of the batch solvothermal reactor and the amine group content also influence the photocatalytic activity. The combined experimental and theoretical results reveal that amine substituents improve the chemisorption of nitrogen molecules and the conversion of nitrogen into ammonia follows a dual pathway, i.e., a Mars-van Krevelen process and a ligand-to-metal charge transfer mechanism. This work provides a molecular engineering strategy via dual catalysis toward efficient ammonia production.

A convenient catalytic method for preparation of new tetrahydropyrido[2,3-d]pyrimidines via a cooperative vinylogous anomeric based oxidation

In this study, a novel functionalized metal-organic frameworks MIL-125(Ti)-N(CH₂PO₃H₂)₂ was designed and synthesized via post-modification methodology. Then, MIL-125(Ti)-N(CH₂PO₃H₂)₂ as a mesoporous catalyst was applied for the synthesis of a wide range of novel tetrahydropyrido[2,3-d]pyrimidines as bioactive candidate compounds by one-pot condensation reaction of 3-(1-methyl-1H-pyrrol-2-yl)-3-oxopropanenitrile, 6-amino-1,3-dimethylpyrimidine-2,4(1H,3H)-dione and aromatic aldehydes at 100 °C under solvent-free condition. Interestingly, the preparation of tetrahydropyrido[2,3-d]pyrimidine was achieved via vinylogous anomeric based oxidation mechanism with a high yield and short reaction time.

Deconvolution of metal apportionment in bulk metal-organic frameworks

We report a general route to decipher the apportionment of metal ions in bulk metal-organic frameworks (MOFs) by solid-state nuclear magnetic resonance spectroscopy. We demonstrate this route in Mg_1-xNi_x-MOF-74, where we uncover all eight possible atomic-scale Mg/Ni arrangements through identification and quantification of the distinct chemical environments of ¹³C-labeled carboxylates as a function of the Ni content. Here, we use magnetic susceptibility, bond pathway, and density functional theory calculations to identify local metal bonding configurations. The results refute the notion of random apportionment from solution synthesis; rather, we reveal that only two of eight Mg/Ni arrangements are preferred in the Ni-incorporated MOFs. These preferred structural arrangements manifest themselves in macroscopic adsorption phenomena as illustrated by CO/CO₂ breakthrough curves. We envision that this nondestructive methodology can be further applied to analyze bulk assembly of other mixed-metal MOFs, greatly extending the knowledge on structure-property relationships of MOFs and their derived materials.

Demonstration of High-Throughput Building Block and Composition Analysis of Metal-Organic Frameworks

Metal-organic frameworks (MOFs) are composed of inorganic metal-containing nodes and organic linker groups and are promising porous materials for a wide range of applications. More than 90 000 different MOFs have been synthesized with different inorganic nodes, organic linkers, and node-linker connectivity patterns. While databases have been created to catalog this enormous number of structures, they generally do not provide functionality to easily search, sort, and understand MOFs based on composition and building blocks. Because structure-property relationships are critical to identify, here we outline our new program MOFseek and demonstrate that it can perform high-throughput structure and composition analyses of MOF structures. This program enables the fast analysis of tens of thousands of MOFs in databases based on the local chemical environment. We demonstrate the unique capabilities of MOFseek by analyzing the CoRE MOF database of structures.

Synthesis and Biomedical Applications of Highly Porous Metal-Organic Frameworks

In this review, aspects of the synthesis, framework topologies, and biomedical applications of highly porous metal-organic frameworks are discussed. The term "highly porous metal-organic frameworks" (HPMOFs) is used to denote MOFs with a surface area larger than 4000 m² g^-1. Such compounds are suitable for the encapsulation of a variety of large guest molecules, ranging from organic dyes to drugs and proteins, and hence they can address major contemporary challenges in the environmental and biomedical field. Numerous synthetic approaches towards HPMOFs have been developed and discussed herein. Attempts are made to categorise the most successful synthetic strategies; however, these are often not independent from each other, and a combination of different parameters is required to be thoroughly considered for the synthesis of stable HPMOFs. The majority of the HPMOFs in this review are of special interest not only because of their high porosity and fascinating structures, but also due to their capability to encapsulate and deliver drugs, proteins, enzymes, genes, or cells; hence, they are excellent candidates in biomedical applications that involve drug delivery, enzyme immobilisation, gene targeting, etc. The encapsulation strategies are described, and the MOFs are categorised according to the type of biomolecule they are able to encapsulate. The research field of HPMOFs has witnessed tremendous development recently. Their intriguing features and potential applications attract researchers' interest and promise an auspicious future for this class of highly porous materials.

Improving the sensitivity of MAS spheres using a 9.5 mm spherical shell with 219 μL sample volume spinning in a spherical solenoid coil

Spherical rotors in magic angle spinning (MAS) nuclear magnetic resonance (NMR) experiments have potential advantages relative to cylindrical rotors in terms of ease of fabrication, low risk of rotor crash, easy sample exchange, and better microwave access. However, one major disadvantage so far of spherical rotors is poor NMR filling factor due to the small sample volume and large cylindrical radiofrequency (RF) coil. Here we present a novel NMR coil geometry in the form of a spherical coil. The spherical coil best fits the spherical sample to maximize sensitivity, while also providing excellent RF homogeneity. We further improve NMR sensitivity by employing a spherical shell as the rotor, thereby maximizing sample volume (219 μL in this case of 9.5 mm outer diameter spheres). The spinning gas is supplied by a 3D-printed ring stator external to the coil, thereby introducing a simplified form of MAS stators. In this apparatus, the RF field generated along the coil axis is perpendicular to the external magnetic field, regardless of rotor orientation. We observe a linear increase in sensitivity with increasing sample volume. We also simulate the RF performance of spherical and cylindrical solenoid coils with constant or variable pitch for spherical and cylindrical rotors, respectively. The simulation results show that spherical solenoid coils generate comparable B₁ field intensities but have better homogeneity than cylindrical solenoid coils do.

Multicomponent, Functionalized HKUST-1 Analogues Assembled via Reticulation of Prefabricated Metal-Organic Polyhedral Cavities

Metal–organic frameworks (MOFs) assembled from multiple building blocks exhibit greater chemical complexity and superior functionality in practical applications. Herein, we report a new approach based on using prefabricated cavities to design isoreticular multicomponent MOFs from a known parent MOF. We demonstrate this concept with the formation of multicomponent HKUST-1 analogues, using a prefabricated cavity that comprises a cuboctahedral Rh(II) metal–organic polyhedron functionalized with 24 carboxylic acid groups. The cavities are reticulated in three dimensions via Cu(II)-paddlewheel clusters and (functionalized) 1,3,5-benzenetricarboxylate linkers to form three- and four-component HKUST-1 analogues.

Influence of the Synthesis and Crystallization Processes on the Cation Distribution in a Series of Multivariate Rare-Earth Metal-Organic Frameworks and Their Magnetic Characterization

The incorporation of multiple metal atoms in multivariate metal-organic frameworks is typically carried out through a one-pot synthesis procedure that involves the simultaneous reaction of the selected elements with the organic linkers. In order to attain control over the distribution of the elements and to be able to produce materials with controllable metal combinations, it is required to understand the synthetic and crystallization processes. In this work, we have completed a study with the RPF-4 MOF family, which is made of various rare-earth elements, to investigate and determine how the different initial combinations of metal cations result in different atomic distributions in the obtained materials. Thus, we have found that for equimolar combinations involving lanthanum and another rare-earth element, such as ytterbium, gadolinium, or dysprosium, a compositional segregation takes place in the products, resulting in crystals with different compositions. On the contrary, binary combinations of ytterbium, gadolinium, erbium, and dysprosium result in homogeneous distributions. This dissimilar behavior is ascribed to differences in the crystallization pathways through which the MOF is formed. Along with the synthetic and crystallization study and considering the structural features of this MOF family, we also disclose here a comprehensive characterization of the magnetic properties of the compounds and the heat capacity behavior under different external magnetic fields.

A scalable solid-state nanoporous network with atomic-level interaction design for carbon dioxide capture

Carbon capture and sequestration reduces carbon dioxide emissions and is critical in accomplishing carbon neutrality targets. Here, we demonstrate new sustainable, solid-state, polyamine-appended, cyanuric acid-stabilized melamine nanoporous networks (MNNs) via dynamic combinatorial chemistry (DCC) at the kilogram scale toward effective and high-capacity carbon dioxide capture. Polyamine-appended MNNs reaction mechanisms with carbon dioxide were elucidated with double-level DCC where two-dimensional heteronuclear chemical shift correlation nuclear magnetic resonance spectroscopy was performed to demonstrate the interatomic interactions. We distinguished ammonium carbamate pairs and a mix of ammonium carbamate and carbamic acid during carbon dioxide chemisorption. The coordination of polyamine and cyanuric acid modification endows MNNs with high adsorption capacity (1.82 millimoles per gram at 1 bar), fast adsorption time (less than 1 minute), low price, and extraordinary stability to cycling by flue gas. This work creates a general industrialization method toward carbon dioxide capture via DCC atomic-level design strategies.

Portable visual assay of Bacillus anthracis biomarker based on ligand-functionalized dual-emission lanthanide metal-organic frameworks and smartphone-integrated mini-device

A single-functionalized ligand single-Ln³⁺ based dual-emission Ln-MOF fluorescent sensor was established for portable and visual dipicolinic acid (DPA, Bacillus anthracis biomarker) detection. First, a theory calculation-based prediction model was developed for designing single-functionalized ligand single-Ln³⁺ dual-emission Ln-MOFs. The model consisted of three calculation modules: intramolecular hydrogen bonds, excited state energy levels, and coordination stability with Ln³⁺ of ligands. Tb³⁺ and Eu³⁺ were selected as metal luminescence centers, PTA-X (PTA: p-phthalic acid, X = NH₂, CH₃, H, OH) with different functional groups as one-step functionalization ligands, and the luminescent feature of four Tb-MOFs and four Eu-MOFs was predicted with the model. Coupled with prediction results and experimental verification results, Tb-PTA-OH was rapidly determined to be the sole dual-emission Ln-MOF. Then, Tb-PTA-OH was applied to DPA detection by ratiometric fluorescence, and an ultra-low limit of detection (13.4 nM) was obtained, which is much lower than the lowest anthrax infectious dose (60 μM). A portable visual assay method based on paper-microchip and smartphone integrated mini-device was further established (limit of qualification 0.48 μM). A new sensing mechanism and a "triple gates" selectivity mechanism to DPA were proposed. This work reveals guidelines for material design and mini-device customization in detecting hazardous substances.

Dynamic network of intermolecular interactions in metal-organic frameworks functionalized by molecular machines

Molecular machines enable external control of structural and dynamic phenomena at the atomic level. To efficiently transfer their tunable properties into designated functionalities, a detailed understanding of the impact of molecular embedding is needed. In particular, a comprehensive insight is fundamental to design hierarchical multifunctional systems that are inspired by biological cells. Here, we applied an on-the-fly trained force field to perform atomistic simulations of a systematically modified rotaxane functionalized metal-organic framework. Our atomistic studies reveal a symmetric and asymmetric interplay of the mechanically bonded rings (MBRs) within the framework depending on the local environment. As a result, their translational motion is modulated ranging from fast oscillatory behavior to cooperative and potentially directed shuttling. The derived picture of competitive interactions, which influence the operation mechanism of the MBRs embedded in these soft porous materials, promotes the development of responsive functional materials, which is a key step toward intelligent matter.

1H Detected Relayed Dynamic Nuclear Polarization

Recently, it has been shown that methods based on the dynamics of 1H nuclear hyperpolarization in magic angle spinning (MAS) NMR experiments can be used to determine mesoscale structures in complex materials. However, these methods suffer from low sensitivity, especially since they have so far only been feasible with indirect detection of 1H polarization through dilute heteronuclei such as 13C or 29Si. Here we combine relayed-DNP (R-DNP) with fast MAS using 0.7 mm diameter rotors at 21.2 T. Fast MAS enables direct 1H detection to follow hyperpolarization dynamics, leading to an acceleration in experiment times by a factor 16. Furthermore, we show that by varying the MAS rate, and consequently modulating the 1H spin diffusion rate, we can record a series of independent R-DNP curves that can be analyzed jointly to provide an accurate determination of domain sizes. This is confirmed here with measurements on microcrystalline l-histidine·HCl·H2O at MAS frequencies up to 60 kHz, where we determine a Weibull distribution of particle sizes centered on a radius of 440 ± 20 nm with an order parameter of k = 2.2.