Single Crystal Metals Encapsulated in Carbon Nanoparticles

Recent progress in realizing novel one-dimensional polymorphs via nanotube encapsulation

Encapsulation of various materials inside nanotubes has emerged as an effective method in nanotechnology that facilitates the formation of novel one-dimensional (1D) structures and enhances their functionality. Because of the effects of geometrical confinement and electronic interactions with host nanotubes, encapsulated materials often exhibit low-dimensional polymorphic structures that differ from their bulk forms. These polymorphs exhibit unique properties, including altered electrical, optical, and magnetic behaviors, making them promising candidates for applications in electronics, energy storage, spintronics, and quantum devices. This review explores recent advancements in the encapsulation of a wide range of materials such as organic molecules, elemental substances, metal halides, metal chalcogenides, and other complex compounds. In particular, we focus on novel polymorphs formed through the geometrical confinement effect within the nanotubes. The atomic structure, other key properties, and potential applications of these encapsulated materials are discussed, highlighting the impact of nanotube encapsulation on their functionalities.

Encapsulating Transition Metal Nanoparticles inside Carbon (TM@C) Chainmail Catalysts for Hydrogen Evolution Reactions: A Review

Green hydrogen energy from electrocatalytic hydrogen evolution reactions (HERs) has gained much attention for its advantages of low carbon, high efficiency, interconnected energy medium, safety, and controllability. Non-precious metals have emerged as a research hotspot for replacing precious metal catalysts due to low cost and abundant reserves. However, maintaining the stability of non-precious metals under harsh conditions (e.g., strongly acidic, alkaline environments) remains a significant challenge. By leveraging the curling properties of two-dimensional materials, a new class of catalysts, encapsulating transition metal nanoparticles inside carbon (TM@C) chainmail, has been successfully developed. This catalyst can effectively isolate the active metal from direct contact with harsh reaction media, thereby delaying catalyst deactivation. Furthermore, the electronic structure of the carbon layer can be regulated through the transfer of electrons, which stimulates its catalytic activity. This addresses the issue of the insufficient stability of traditional non-precious metal catalysts. This review commences with a synopsis of the synthetic advancement of the engineering of TM@C chainmail catalysts. Thereafter, a critical discussion ensues regarding the electrocatalytic performance of TM@C chainmail catalysts during hydrogen production. Ultimately, a comprehensive review of the conformational relationship between the structure of TM@C chainmail catalysts and HER activity is provided, offering substantial support for the large-scale application of hydrogen energy.

Competitive Formation Zones in Carbon Nanotube Float-Catalysis Synthesis: Growth in Length vs. Growth Suppression

Catalytic synthesis of carbon nanotubes (CNT) produces numerous various byproducts such as soot, graphite platelets, catalyst nanoparticles, etc. Identification of the byproduct formation mechanisms would help develop routes to more selective synthesis of better carbon-based materials. This work reports on the identification of the formation zone and conditions for rather unusual closed multishell carbon nanocapsules in a reactor for float-catalysis synthesis of longer CNT. Structural investigation of the formed nanocapsule material along with computational fluid dynamics (CFD) simulations of the reactor suggested a nanocapsule formation mechanism, in which CNT embryos are suppressed in growth by the in-reactor turbulence. By means of TEM and FFT investigation, it is found that differently oriented single crystals of γ-Fe₂O₃, which do not have clear connections with each other, determine a spherical surface. The carbon atoms that seep through these joints do not form crystalline graphite layers. The resulting additional product in the form of graphene-coated (γ-Fe/Fe₃C)/γ-Fe₂O₃ nanoparticles can be a lightweight and effective microwave absorber.

Revealing Surface Restraint-Induced Hexagonal Pd Nanocrystals via In Situ Transmission Electron Microscopy

Achieving metal nanocrystals with metastable phase draws much attention due to their anticipated fascinating properties, wheras it is still challenging because their polymorphism nature and phase transition mechanism remain elusive. Here, phase stability of face-centered cubic (fcc) Pd nanocrystals was studied via in situ spherical aberration (Cs)-corrected transmission electron microscopy (TEM). By constructing a well-defined Pd/C composite structure, Pd nanocrystals encapsulated by graphite, the dispersion process of fcc Pd was observed through a nucleation and growth process. Interestingly, Cs-corrected scanning TEM analysis demonstrated that the newly formed Pd nanocrystals could adopt a metastable hexagonal phase, which was considered challenging to obtain. Accordingly, formation mechanism of the hexagonal Pd nanocrystals was proposed, which involved the combined effect of two factors: (1) templating of graphite and (2) size effect. This work is expected to offer new insight into the polymorphism of Pd nanocrystals and pave the way for the future design of metastable metal nanomaterials.

Effect of Metal Nanopowders on the Performance of Solid Rocket Propellants: A Review

The effects of different types of nano-sized metal particles, such as aluminum (nAl), zirconium (nZr), titanium (nTi), and nickel (nNi), on the properties of a variety of solid rocket propellants (composite, fuel-rich, and composite modified double base (CMDB)) were analyzed and compared with those of propellants loaded with micro-sized Al (mAl) powder. Emphasis was placed on the investigation of burning rate, pressure exponent (n), and hazardous properties, which control whether a propellant can be adopted in solid rocket motors. It was found that nano-sized additives can affect the combustion behavior and increase the burning rate of propellants. Compared with the corresponding micro-sized ones, the nano-sized particles promote higher impact sensitivity and friction sensitivity. In this paper, 101 references are enclosed.

Plasma-Assisted Synthesis of Platinum Nitride Nanoparticles under HPHT: Realized by Carbon-Encapsulated Ultrafine Pt Nanoparticles

Noble metal nitrides (NMNs) have important theoretical significance and potential application prospects due to their high bulk modulus and remarkable electrical properties. However, NMNs can only be synthesized under extreme conditions of ultrahigh pressure and temperature, and nanoscaled NMNs have not been reported. In this work, as typical NMNs, PtN_x nanoparticles were synthesized at 5 GPa and 750 K by the method of plasma-assisted laser-heating diamond anvil cell. The significantly reduced synthesis condition benefited from the ingenious design of the precursor and the remarkable chemical activity of the ultrafine Pt nanoparticles. This study, combining nanomaterials with high-pressure and -temperature (HPHT) techniques, provides a novel process for the preparation of NMN nanomaterials, and a new direction for the synthesis of superhard materials.

Temperature-dependent c-axis lattice-spacing reduction and novel structural recrystallization in carbon nano-onions filled with Fe3C/α-Fe nanocrystals

Carbon nano-onions are approximately spherical nanoscale graphitic shells. When filled with ferromagnetic Fe3C/α-Fe nanocrystals, these structures have several important applications, such as point electron-sources, magnetic data recording, energy storage, and others, that exploit the interaction of either or both the shells and the magnetic moments in the filling. Despite these applications receiving much recent attention, little is known about the structural relationship between the carbon shells and the internal nanocrystal. In this work, the graphitic c-axis lattice-spacing in Fe3C/α-Fe-filled multi-shell structures was determined by XRD in the temperature range from 130 K to 298 K. A significant reduction in the c-axis lattice-spacing was observed in the multi-shell structures. A defect-induced magnetic transition was probed and ascribed to the formation of randomly oriented ferromagnetic clusters in the recrystallized disclination-rich regions of the CNOs-shells, in agreement with the percolative theory of ferromagnetism.

The structure of ScC2 (X̃2A1): A combined Fourier transform microwave/millimeter-wave spectroscopic and computational study

Pure rotational spectra of Sc¹³C₂ (X̃²A₁) and Sc¹²C¹³C (X̃²A') have been measured using Fourier transform microwave/millimeter-wave methods. These molecules were synthesized in a DC discharge from the reaction of scandium vapor, produced via laser ablation, with ¹³CH₄ or ¹³CH₄/¹²CH₄, diluted in argon. The N_Ka,Kc = 1_0,1 → 0_0,0, 2_0,2 → 1_0,1, 3_0,3 → 2_0,2, and 4_0,4 → 3_0,3 transitions in the frequency range of 14 GHz-61 GHz were observed for both species, each exhibiting hyperfine splittings due to the nuclear spins of ¹³C (I = 1/2) and/or Sc (I = 7/2). These data have been analyzed with an asymmetric top Hamiltonian, and rotational, spin-rotation, and hyperfine parameters have been determined for Sc¹³C₂ and Sc¹²C¹³C. In addition, a quartic force field was calculated for ScC₂ and its isotopologues using a highly accurate coupled cluster-based composite method, incorporating complete basis set extrapolation, scalar relativistic corrections, outer core and inner core electron correlation, and higher-order valence correlation effects. The agreement between experimental and computed rotational constants, including the effective constant (B + C), is ∼0.5% for all three isotopologues. This remarkable agreement suggests promise in predicting rotational spectra of new transition metal-carbon bearing molecules. In combination with previous work on Sc¹²C₂, an accurate structure for ScC₂ has been established using combined experimental (B, C) and theoretical (A) rotational constants. The radical is cyclic (or T-shaped) with r_(Sc-C) = 2.048(2) Å, r_(C-C) = 1.272(2) Å, and ∠_(C-Sc-C) = 36.2(1)°. The experimental and theoretical results also suggest that ScC₂ contains a C₂ ^- moiety and is largely ionic.

Crossing interfacial conduction in nanometer-sized graphitic carbon layers

Graphitic carbon layers (GCLs), exemplified by graphene, have been proposed for potential application in high-performance functional devices due to superior electrical properties, e.g., high electron mobility. In state-of-the-art electronics, it is required that GCLs are miniaturized to nanometer scales and incorporated into the integrated circuits to exhibit novel functions at nanometer scales. However, the implementation of nanometer-scale GCLs is suspended; the function in devices is deteriorated by increasing contact resistance in miniaturized GCL/electrode interfaces. In this study, nanometer-sized GCL/gold (Au) interfaces were fabricated via atomistic visualization of nanomanipulation, and simultaneously their contact resistance was measured. We showed that the contact resistivity of the interfaces was decreased to the order of 10^-10Ω cm², which was 10⁴ times smaller than that of micrometer-sized or larger GCL/metal interfaces. In addition, it was revealed that peculiar electrical conduction at the nanometer-sized GCL/Au interfaces emerged; current flows throughout the entire area of the interfaces unlike micrometer-sized or larger GCL/metal interfaces. These results directly contribute to actual application of GCLs in advanced nanodevices.

Tuning the magnetic properties of beryllium chains

In this work we explore the effect of confining beryllium chains inside carbon nanotubes. Linear Ben systems are characterized by two states originating from the presence of edge orbitals localized at the chain extremities. The two spins occupying these orbitals are, in the gas phase, antiferromagnetically coupled, with the magnetic coupling J decaying exponentially as a function of increasing length of the chain. When inserted into narrow carbon nanotubes, the linear geometry is found to be more stable than the more compact cluster conformation favored for the isolated case: the lack of space inside the cavity prevents the chain from folding. Most importantly, the presence of the surrounding nanotube not only preserves the linear structure of Ben, but affects its magnetic properties too. In particular it was found that the magnetic coupling between the ground and the first excited state can be modulated according to the nanotube diameter as well as the chain length, and our calculations suggest a possible direct relationship between these parameters and J. This behavior can be exploited to engineer a composite Ben@CNT system with the magnetic coupling tuned by construction, with interesting potential applications.

Engineering FeCo alloy@N-doped carbon layers by directly pyrolyzing Prussian blue analogue: new peroxidase mimetic for chemiluminescence glucose biosensing

Direct pyrolysis of a Prussian blue analogue produced FeCo@NC with high and stable peroxidase-like activity, which catalyzes luminol oxidation by H₂O₂ to generate strong CL emission, and this finding results in a new CL biosensor for glucose.

The Isolation and Identification of Bacteria on Feathers of Migratory Bird Species

Worldwide, bacteria are the most ubiquitous microorganisms, and it has been extensively demonstrated that migratory wild birds can increase bacterial global scale dispersion through long-distance migration and dispersal. The microbial community hosted by wild birds can be highly diverse, including pathogenic strains that can contribute to infections and disease spread. This study focused on feather and plumage bacteria within bird microbial communities. Samples were collected during ornithological activities in a bird ringing station. Bacterial identification was carried out via DNA barcoding of the partial 16S rRNA gene. Thirty-seven isolates of bacteria were identified on the chest feathers of 60 migratory birds belonging to three trans-Saharan species: Muscicapastriata, Hippolaisicterina, and Sylviaborin. Our results demonstrate the possibility of bacterial transfer, including pathogens, through bird migration between very distant countries. The data from the analysis of plumage bacteria can aid in the explanation of phenomena such as migratory birds’ fitness or the development of secondary sexual traits. Moreover, these results have deep hygienic–sanitary implications, since many bird species have synanthropic behaviors during their migration that increase the probability of disease spread.

Microwave-assisted CVD-like synthesis of dispersed monolayer/few-layer N-doped graphene encapsulated metal nanocrystals for efficient electrocatalytic oxygen evolution

Herein a novel and general microwave-assisted chemical vapor deposition (CVD)-like synthetic strategy was developed to realize the ultrafast synthesis of a series of well-dispersed monolayer/few-layer N-doped graphene shell encapsulated metal nanocrystals (M@NC) by using a metal-organic framework (MOF) on graphene as precursors for the first time. Unlike traditional programmed heat treatment, this microwave-assisted method decomposed the MOF into separated metal and carbon- and nitrogen-containing gases rather than aggregated metal and carbon composites during the initial thermal transformation stages. This change ensured the effective control of the subsequent formation process of carbon on the surface of metal and led to the formation of well-dispersed M@NC with monolayer/few-layer NC. Moreover, the graphene substrate promoted the full exposure of all active monolayer/few-layer NC, and thus the obtained FeNi@NC/graphene displays the best electrocatalytic properties for the oxygen evolution reaction of all of the previously reported M@NC based catalysts, including the lowest overpotential (261 mV) at 10 mA cm-2 in alkaline electrolyte (1 M KOH), the smallest Tafel slope (40 mV dec-1) and excellent durability for at least 120 h.

On the morphological, structural and electrochemical properties of entangled Cu-filled carbon nano-onions

We demonstrate an advanced CVS approach in which the synthesis of Cu-filled carbon nano-onions (CNOs) is achieved by direct sublimation and pyrolysis of a not previously used precursor, namely chloro(1,5-cyclooctadiene)copper(i) dimer.

Ferromagnetically filled carbon nano-onions: the key role of sulfur in dimensional, structural and electric control

A key challenge in the fabrication of ferromagnetically filled carbon nano-onions (CNOs) is the control of their thickness, dimensions and electric properties. Up to now literature works have mainly focused on the encapsulation of different types of ferromagnetic materials including α-Fe, Fe3C, Co, FeCo, FePd3 and others within CNOs. However, no report has yet shown a suitable method for controlling both the number of shells, diameter and electric properties of the produced CNOs. Here, we demonstrate an advanced chemical vapour deposition approach in which the use of small quantities of sulfur during the pyrolysis of ferrocene allows for the control of (i) the diameter of the CNOs, (ii) the number of shells and (iii) the electric properties. We demonstrate the morphological, structural, electric and magnetic properties of these new types of CNOs by using SEM, XRD, TEM, HRTEM, EIS and VSM techniques.

Synthesis and Characterization of Graphite-Encapsulated Iron Nanoparticles from Ball Milling-Assisted Low-Pressure Chemical Vapor Deposition

Graphite-encapsulated Fe nanoparticles were synthesized using a combined method of high-energy ball milling and low-pressure chemical vapor deposition (LPCVD). Fe₂O₃ and graphite powders were milled to increase their surface areas and obtain a more homogeneous distribution. LPCVD was performed at a pressure of ~0.57 Torr in a tube furnace under a CH₄/H₂ atmosphere at 1050°C for 1 and 3 h. As-synthesized samples were purified in a 2 M HF solution. Characterization was performed using X-ray diffractometry (XRD), scanning and transmission electron microscopy (SEM and TEM) and alternating gradient magnetometry (AGM). XRD revealed the presence of body centered cubic (BCC) and face centered cubic (FCC) Fe phases without residual iron oxides. SEM confirmed the powders were better mixed and smaller after ball milling compared to mortar and pestle milled powders. High resolution TEM showed all nanoparticles had at least four and on average 16 graphitic layers, around an Fe core ranging from 20-300 nm. Magnetic measurements indicated that nanoparticles exhibit soft ferromagnetic behavior with low saturation magnetization (17-21 emu/g) and coercivity (110 Oe). A chemical stability test performed in a 2 M HCl solution showed that graphitic shells did not degrade, nor was there evidence of core dissolution or shell discontinuity.

Achieving independent control of core diameter and carbon shell thickness in Pd-C core-shell nanoparticles by gas phase synthesis

Pd-C core-shell nanoparticles with independently controllable core size and shell thickness are grown by gas phase synthesis. First, the core size is selected by electrical mobility values of charged particles, and second, the shell thickness is controlled by the concentration of carbon precursor gas. The carbon shell grows by adsorption of carbon precursor gas molecules on the surface of nanoparticles, followed by sintering. The presence of a carbon shell on Pd nanoparticles is potentially important in hydrogen-related applications operating at high temperatures or in catalytic reactions in acidic/aqueous environments.

Cm-size free-standing self-organized buckypaper of bucky-onions filled with ferromagnetic Fe3C

Novel cm-size free-standing buckypapers of bucky-onions filled with a single-phase of ferromagnetic Fe₃C single crystals were serendipitously discovered.

Dynamic encapsulation of corannulene molecules into a single-walled carbon nanotube

Corannulene molecules dynamically encapsulated into a single-walled carbon nanotube form an ordered stack or a partially ordered stack where concave–concave corannulene dimers are the structural motif.

Structures and electrical properties of single nanoparticle junctions assembled using LaC2-encapsulating carbon nanocapsules

As the miniaturization of integrated circuits advances, electronics using single molecules and nanosize particles are being studied increasingly. Single nanoparticle junctions (SNPJs) consist of two electrodes sandwiching a single nanoparticle. Nanocarbons with nanospaces in their center, such as fullerenes, carbon nanotubes, and carbon nanocapsules (CNCs), are expected to be elements of advanced SNPJs. In this study, SNPJs were assembled using lanthanum dicarbide (LaC2)-encapsulating CNCs and two gold (Au) electrodes by a nanotip operation inside a high-resolution transmission electron microscope. The atomic configuration and electrical resistance of the SNPJs were investigated in situ. The results implied that the electrical resistance of the SNPJ depended on the interface structures of the contacts between the CNC and Au electrodes, i.e., the contact electrical resistance, and the greatest portion of the current through the SNPJ flowed along the outermost carbon layer of the CNC. Thus, the resistance of the SNPJs using the CNCs was demonstrated and the electrical conduction mechanism of one of the CNC was discussed in this study.

Enhanced dechlorination of m-DCB using iron@graphite/palladium (Fe@C/Pd) nanoparticles produced by pulsed laser ablation in liquid

In this work, the zero valent Fe (ZVI) and graphite-encapsulated Fe (Fe@C) nanoparticles (NPs) were easily and selectively prepared by a pulsed laser ablation (PLA) method in an aqueous sodium borohydride solution and ascorbic acid dissolved in methanol, respectively. Here, the Fe@C NPs were uniquely synthesized by PLA in methanol, where the solvent is used as both a carbon source for the graphitic layers and solvent, which is very unique. Furthermore, Pd NPs were loaded onto the surface of the Fe@C NPs to prepare bimetallic (Fe@C/Pd) NPs for the enhancement of the degradation efficiency of m-dichlorobenzene (m-DCB). The morphology, crystallinity, and surface composition of the prepared NPs were carefully characterized by high-resolution transmission electron microscopy (HRTEM), energy dispersive x-ray spectrometer (EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The degradation rate of m-DCB using single (Fe and Pd) or bimetallic (Fe/Pd and Fe@C/Pd) NPs were compared by using gas chromatography. Among these NPs produced in this work, the Fe@C/Pd NPs with 1.71 wt % of Pd showed an excellent dechlorination efficiency for m-DCB with 100% degradation within 75 min. The graphitic layer on the Fe NPs played as not only an oxidation resistant for the Fe NPs to surroundings, but also a supporter of the Pd NPs for the enhanced degradation efficiency of m-DCB.

Comparative cytotoxicity studies of carbon-encapsulated iron nanoparticles in murine glioma cells

Carbon-encapsulated iron nanoparticles (CEINs) have recently emerged as a new class of magnetic nanomaterials with a great potential for an increasing number of biomedical applications. To address the current deficient knowledge of cellular responses due to CEIN exposures, we focused on the investigation of internalization profile and resulting cytotoxic effects of CEINs (0.0001-100 μg/ml) in murine glioma cells (GL261) in vitro. The studied CEIN samples were characterized (TEM, FT-IR, Zeta potential, Boehm titration) and examined as raw and purified nanomaterials with various surface chemistry composition. Of the four type CEINs (the mean diameter 47-56 nm) studied here, the as-synthesized raw nanoparticles (Fe@C/Fe) exhibited high cytotoxic effects on the plasma cell membrane (LDH, Calcein AM/PI) and mitochondria (MTT, JC-1) causing some pro-apoptotic evens (Annexin V/PI) in glioma cells. The effects of the purified (Fe@C) and surface-modified (Fe@C-COOH and Fe@C-(CH2)2COOH) CEINs were found in quite similar patterns; however, most of these cytotoxic events were slightly diminished compared to those induced by Fe@C/Fe. The study showed that the surface-functionalized CEINs affected the cell cycle progression in both S and G2/M phases to a greater extent compared to that of the rest of nanoparticles studied to data. Taken all together, the present results highlight the importance of the rational design of CEINs as their physicochemical features such as morphology, hydrodynamic size, impurity profiles, and especially surface characteristics are critical determinants of different cytotoxic responses.

Organic synthesis on graphene

Graphene is a two-dimensional crystalline carbon allotrope that has fascinated researchers worldwide and has extended the interest in carbon structures such as fullerenes and nanotubes. In this Account, we use electrical characterization tools to study chemistry on supported graphene. These experiments elucidate the way covalently bound phenyl units can change graphene's physical properties. Can we use chemistry to control electronic properties of graphene? What can we learn from well-known carbon allotropes like fullerenes? The surfaces of fullerenes and graphene show distinct differences in reactivity because of the high strain of sp² carbon in fullerenes compared with the complete lack of strain in graphene. Diazonium chemistry provides a versatile tool for attaching phenyl units covalently to carbon to produce advanced materials and electronic components, but diazonium-based carbon chemistry is strongly influenced by strain. Although fullerenes are highly reactive, graphite (stacks of graphene) remains relatively inert. We chemically introduce n- and p-like doping patterns in two-dimensional graphene using photolithography and extend the ability to chemically control doping to the chemical design of conducting and insulating areas. Thereby we can shape graphene surfaces into functional electronic devices. This Account also describes multistep synthesis on graphene-coated nanoparticles and the introduction of various functional groups on graphene surfaces. Only few functional groups can be produced directly via diazonium chemistry. To overcome this issue, we used these functional groups as starting points for more demanding organic reactions. We covalently attached chelating agents, catalysts, or polymers on the carbon surface. These more complex reactions facilitate the design of electronic modifications, intergraphene connections, and anchors for polymer incorporation. Diazonium chemistry forms strong covalent bridges between graphene and other areas of chemistry.

Conjugates of magnetic nanoparticle-actinide specific chelator for radioactive waste separation

A novel nanotechnology for the separation of radioactive waste that uses magnetic nanoparticles (MNPs) conjugated with actinide specific chelators (MNP-Che) is reviewed with a focus on design and process development. The MNP-Che separation process is an effective way of separating heat generating minor actinides (Np, Am, Cm) from spent nuclear fuel solution to reduce the radiological hazard. It utilizes coated MNPs to selectively adsorb the contaminants onto their surfaces, after which the loaded particles are collected using a magnetic field. The MNP-Che conjugates can be recycled by stripping contaminates into a separate, smaller volume of solution, and then become the final waste form for disposal after reusing number of times. Due to the highly selective chelators, this remediation method could be both simple and versatile while allowing the valuable actinides to be recovered and recycled. Key issues standing in the way of large-scale application are stability of the conjugates and their dispersion in solution to maintain their unique properties, especially large surface area, of MNPs. With substantial research progress made on MNPs and their surface functionalization, as well as development of environmentally benign chelators, this method could become very flexible and cost-effective for recycling used fuel. Finally, the development of this nanotechnology is summarized and its future direction is discussed.

In-flight gas phase growth of metal/multi layer graphene core shell nanoparticles with controllable sizes

In this report, we present a general method for a continuous gas-phase synthesis of size-selected metal/multi layer graphene (MLG) core shell nanoparticles having a narrow size distribution of metal core and MLG shell for direct deposition onto any desired substrate kept under clean vacuum conditions. Evolution of MLG signature is clearly observed as the metal-carbon agglomerates get transformed to well defined metal/MLG core shell nanoparticles during their flight through the sintering zone. The growth takes place via an intermediate state of alloy nanoparticle (Pd-carbon) or composite nanoparticle (Cu-carbon), depending upon the carbon solubility in the metal and relative surface energy values. It has been also shown that metal/MLG nanoparticles can be converted to graphene shells. This study will have a large impact on how graphene or graphene based composite nanostructures can be grown and deposited in applications requiring controllable dimensions, varied substrate choice, large area and large scale depositions.

Liquid metal nanodroplet dynamics inside nanocontainers

Here we report direct observations of spatial movements of nanodroplets of Pb metal trapped inside sealed carbon nanocontainers. We find drastic changes in the mobility of the liquid droplets as the particle size increases from a few to a few ten nanometers. In open containers the droplet becomes immobile and readily evaporates to the vacuum environment. The particle mobility strongly depends on confinement, particle size, and wetting on the enclosed surface. The collisions between droplets increase mobility but the tendency is reversed if collisions lead to droplet coalescence. The dynamics of confined nanodroplets could provide new insights into the activity of nanostructures in spatially constrained geometries.

Synthesis of novel CoCx@C nanoparticles

CoC(x) nanoparticles encapsulated in carbon shells were synthesized using a pulsed plasma in liquid ethanol. This is the first time that monolithic cubic phase cobalt carbide nanoparticles have been obtained. X-ray diffraction refinement of the nanoparticles showed that the lattice parameter of prepared cubic phase cobalt carbide is larger than that of CoC(x) (44-0962) and cubic phase Co (15-0806 and 01-1259). The x-ray absorption fine structure spectra near the Co K-edge of the synthesized sample indicated differences from commercial metallic cobalt and cobalt oxide samples. High resolution transmission electron microscopy revealed that a thin carbon coating covered the surface of the nanoparticles. These carbon layers might isolate core CoC(x) material from the outside environment, and allow functionalization by carboxyl groups for the further purpose of targeted drug delivery. The obtained CoC(x)@C particles, with a crystallite size of about 10 nm confirmed by the electron microscope, aggregate into 20-40 nm secondary particles in distilled water as shown by dynamic light scattering, and possess high saturation magnetization of about 120 emu g(-1). The sodium 3'-[1-(phenylaminocarbonyl)-3,4-tetrazolium]-bis(4-methoxy-6-nitro)benzene sulfonic acid hydrate assay and defragmentation of deoxyribonucleic acid on MCF-7 cells after incubation with particles indicate relatively low cytotoxicity of CoC(x)@C nanoparticles, compared with micro-sized and nano-sized metallic cobalt particles and commonly used iron oxides. For the small sized CoC(x)@C particles, the release of cobalt ions was checked by a chelation method with ethylenediaminetetraacetic acid solution to be at a very low level compared with other reference materials.

Synthesis of Cobalt-Encapsulated Carbon Nanocapsules Using Cobalt-Doped Fullerene Nanowhiskers

We synthesized cobalt- (Co-) doped C60 nanowhiskers (NWs) by applying a liquid-liquid interfacial precipitation method using a C60-saturated toluene solution and 2-propanol with Co nitrate hexahydrate (Co(NO3)3⋅6H2O). Heating the NWs at 873–1173 K produced carbon nanocapsules (CNCs) that encapsulated Co clusters with a hexagonal-closed-packed structure. After heating at 1273 K, the encapsulated Co clusters in CNCs were transformed into orthorhombic Co2C clusters. It was found that Co- and Co2C-encapsulated CNCs can be produced by varying heating temperature.

Synthesis of Carbon Nanocapsules and Nanotubes Using Fe-Doped Fullerene Nanowhiskers

We synthesized iron-(Fe-)doped C60nanowhiskers (NWs) by applying the liquid-liquid interfacial precipitation method that employs a C60-saturated toluene solution and a solution of 2-propanol containing ferric nitrate nonahydrate (Fe(NO3)3⋅9H2O). Fe particles of 3–7 nm in diameter were precipitated in the NWs. By heating at 1173 K, the NWs were transformed into hollow and Fe3C-encapsulated carbon nanocapsules and carbon nanotubes.

Novel C/Cu sheath/core nanostructures synthesized via low-temperature MOCVD

C/Cu sheath/core nanocable arrays were mass-produced on various substructures, such as Si, SiO(2), Cu or glass, by using a one-step low-temperature metal-organic chemical vapor deposition. The novel nanostructures consist of a faceted Cu nanowire core with six side surfaces and four top surfaces, and a sheath of carbon. The as-synthesized nanocables are demonstrated excellent oxidization resistance and field emission properties, and are expected to be excellent candidates as nano-interconnectors, or nanocables, in electronic devices and nano-emitters for field emissions.