Impact of Reaction Environment on Photogenerated Charge Transfer Demonstrated by Sequential Imaging

Most photocatalysis research focuses on understanding the photogenerated charge transfer processes within the solid catalysts themselves. However, these studies often overlook the impact of the reaction environment on photogenerated charge separation and reactions. To address this gap, our study employed a sequential imaging methodology that integrates surface photovoltage microscopy (SPVM), in situ atomic force microscopy (AFM), and scanning electrochemical microscopy (SECM) to track the transfer of photogenerated charges from the space charge region to the reactants at the nanoscale on individual BiVO4 particles. It identifies the key role that surface charges at the photocatalyst-electrolyte interface play in photogenerated charge transfer. Specifically, we demonstrated that the surface charge generates an additional driving force, which adjusts the interface electric field and reverses the photovoltage of {010} facet from 90 to -25 mV in a neutral electrolyte. This competitive or even larger driving force compels the photogenerated electrons, which are confined within the bulk, to migrate to the surface, ultimately leading to the redistribution of photogenerated charges. Furthermore, our findings uncovered that the difference between the solution pH and the isoelectric point of the facet serves as the origin of the interfacial electric field. Overall, our sequential imaging research fills an important gap in understanding the driving and influencing factors of charge transfer across the solid-liquid interface for photocatalytic reactions in solution. It provides significant insights into clarifying the bottleneck issue of charge separation in photocatalytic reactions.

Putting Charge Transfer Degree as a Bridge Connecting Surface-Enhanced Raman Spectroscopy and Photocatalysis

To date, few systematic approach has been established for predicting catalytic performance by analyzing the spectral information of molecules adsorbed on photocatalyst surfaces. Effective charge transfer (CT) between the semiconductor photocatalysts and surface-absorbed molecules is essential for enhancing catalytic activity and optimizing light energy utilization. This study aimed to validate the surface-enhanced Raman spectroscopy (SERS) based on the CT enhancement mechanism in investigating the CT process during semiconductor photocatalytic C-C coupling model reactions. A copper ion doping strategy was employed to simultaneously enhance the SERS effect and catalytic activity of zinc oxide (ZnO) derived from metal-organic framework (MOF). By analyzing molecular fingerprint SERS spectra, we calculated the degree of CT (ρCT), revealing that SERS enhancement is attributed to the CT mechanism. In situ SERS spectra confirmed a high correlation between the catalytic activity and ρCT of ZnO with varying copper ion doping levels. A range of photoelectric and spectroscopic tests validated the effectiveness of SERS in linking CT to photocatalytic performance, consistent with first-principles density functional theory (DFT) simulations. This finding is also validated in other semiconductor materials and catalytic reactions, demonstrating the broad applicability of ρCT for predicting and evaluating SERS and catalytic activity.

Sulfur isotope engineering in heterostructures of transition metal dichalcogenides

Heterostructuring of two-dimensional materials offers a robust platform to precisely tune optoelectronic properties through interlayer interactions. Here we achieved a strong interlayer coupling in a double-layered heterostructure of sulfur isotope-modified adjacent MoS2 monolayers via two-step chemical vapor deposition growth. The strong interlayer coupling in the MoS2(34S)/MoS2(32S) was affirmed by low-frequency shear and breathing modes in the Raman spectra. The photoluminescence emission spectra showed that isotope-induced changes in the electronic structure and strong interlayer coupling led to the suppression of intralayer excitons, resulting in dominant emission from the MoS2(32S) layer. Time-resolved photoluminescence experiments indicated faster lifetimes in the MoS2(34S)/MoS2(32S) heterostructure compared to the conventional bilayers with the natural isotopic abundance, highlighting nuanced interlayer exciton dynamics due to the isotopic modification. This study underscores the great potential of isotope engineering in van der Waals heterostructures, as it enables tailoring the band structure and exciton dynamics at the nuclear level without the need of chemical modification.

Water adsorption on ferroelectric PbTiO3 (0 0 1) surface: A density functional theory study

In this work, combining the density functional theory (DFT) calculations and the ab initio molecular dynamics (AIMD) simulations, the water adsorption behavior, including the molecular and the dissociative adsorption on the negatively polarized (0 0 1) surface of ferroelectric PbTiO3 was comprehensively studied. Our theoretical results show that the dissociative adsorption of water is more energetically favorable than the molecular adsorption on the pristine PbTiO3 (0 0 1) surface. It has been also found that introducing surface oxygen vacancies (OV) can enhance the thermodynamic stability of dissociative adsorption of water molecule. The AIMD simulations demonstrate that water molecule can spontaneously dissociate into hydrogen atoms (H) and hydroxyl groups (OH) on the pristine PbTiO3 (0 0 1) surface at room temperature. Moreover, the surface OV can effectively facilitate the dissociative adsorption of water molecules, leading to a high surface coverage of OH group, thus giving rise to a high reactivity for water splitting on defective PbTiO3 (0 0 1) surface with OV. Our results not only comprehensively understand the reason for the photocatalytic water oxidation activity of single domain PbTiO3, but also shed light on the development of high performance ferroelectric photocatalysts for water splitting.

Facile synthesis of a novel CeCO3OH@(H/C-CdS) catalyst with synergistic effect of heterophase junction and heterojunction for enhanced visible-light photocatalytic degradation efficiency at room temperature

A new CeCO3OH@(hexagonal/cubic phases-CdS) (CeCO3OH@(H/C-CdS)) composite catalyst was facilely synthesized by a simple microinjection titration-stirring method, in which CdS nanoparticles were dispersed on the surface of CeCO3OH nanolines. The optimal conditions for the preparation of composite catalysts with high photocatalytic performance were determined by single-factor experiments and response surface experiments. Under these conditions, the degradation rate of 30 mL 2.000 g/L rhodamine B (Rh B) by CeCO3OH@(H/C-CdS) in a photocatalytic reaction for 1 h at 25 °C was up to 86.81 % and its degradation rate in a photocatalytic reaction for 150 min was up to 99.62 %. The degradation rate could be maintained above 80 % even after six times recycling. Especially, the photocatalytic degradation efficiency of 2.000 g/L Rh B on the composite catalyst under sunlight and at room temperature for 30 min reached 97.66 %. Meanwhile, the large size of CeCO3OH considerably alleviated the agglomeration of CdS, providing more adsorption and active sites for visible light-mediated degradation of Rh B. Importantly, the Z-scheme charge transfer realized by CdS and CeCO3OH enhanced the efficient separation of photogenerated electrons and holes, and successfully inhibited the recombination of photogenerated electrons with holes. At the same time, owing to the low energy band difference between the two phases of CdS, charge was transferred between the hexagonal and cubic phases, leaving more effective photogenerated charge to participate in the degradation of Rh B. The synergism of the heterophase junction and heterojunction and the presence of oxygen and sulfur vacancies considerably enhanced the degradation performance of the catalyst. Thus, this study provides a new strategy for the modification and enhanced visible-light catalysis performance of CdS-based catalysts.

Charge Transfer Kinetics and Thermodynamics Control the Energy Conversion Efficiency of a Gallium Phosphide Solar Hydrogen Photocathode

P-type gallium phosphide (GaP) photocathodes for hydrogen evolution from water have a theoretical energy conversion efficiency of 12% based on the 2.4 eV optical band gap of the material. The performance of actual GaP photocathodes is much lower, for reasons not entirely clear. Here we use vibrating Kelvin probe surface photovoltage (VKP-SPV), open circuit potential (OCP) measurements, and photoelectrochemical (PEC) experiments to evaluate the kinetic and thermodynamic factors that control energy conversion with GaP photocathodes for the hydrogen evolution reaction (HER). We find that the open circuit photovoltage of the bare GaP-H2O junction is limited by recombination at surface states and that an CdS overlayer increases both photovoltage and photocurrent due to formation of a n-p-junction. An optimized GaP/CdS/Pt photocathode drives hydrogen evolution with a quantum efficiency of 62% at 400 nm and 0.0 V RHE and an open circuit photovoltage of 0.43 V at 250 mW cm-2. The Pt cocatalyst increases the photocurrent due to improve HER kinetics but reduces the photovoltage by promoting recombination. Added hydrogen or oxygen gas raise or lower the photovoltage by modifying the electrostatic barrier (band bending) in GaP. This shows that the GaP/CdS junction is not "buried" but behaves like a Schottky junction whose charge separating properties are controlled by the electrochemical potential of the electrolyte. The dynamic junction properties need to be considered in the design of optimized hydrogen evolution photoelectrodes and photocatalysts. Additionally, the work reveals that PEC or OCP measurements tend to underestimate the photovoltage because they do not account for changes in the electrochemical potential at the electrode-liquid contact. In contrast, the VKP-SPV method provides the open circuit photovoltage value directly. By combining the photovoltage data with OCP data, the minority carrier electrochemical potential at the electrode-liquid contact can be measured in a contactless way. This provides an improved understanding of illuminated photoelectrodes for the production of solar fuels.

Imaging hot photocarrier transfer across a semiconductor heterojunction with ultrafast electron microscopy

Semiconductor heterojunctions have gained significant attention for efficient optoelectronic devices owing to their unique interfaces and synergistic effects. Interaction between charge carriers with the heterojunction plays a crucial role in determining device performance, while its spatial-temporal mapping remains lacking. In this study, we employ scanning ultrafast electron microscopy (SUEM), an emerging technique that combines high spatial-temporal resolution and surface sensitivity, to investigate photocarrier dynamics across a Si/Ge heterojunction. Charge dynamics are selectively examined across the junction and compared to far bulk areas, through which the impact of the built-in potential, band offsets, and surface effects is directly visualized. In particular, we find that the heterojunction drastically modifies the hot photocarrier diffusivities in both Si and Ge regions due to charge trapping. These findings are further elucidated with insights from the band structure and surface potential measured by complementary techniques. This work demonstrates the tremendous effect of heterointerfaces on hot photocarrier dynamics and showcases the potential of SUEM in characterizing realistic optoelectronic devices.

A contactless in situ EFISH method for measuring electrostatic potential profile of semiconductor/electrolyte junctions

In photoelectrochemical cells, promising devices for directly converting solar energy into storable chemical fuels, the spatial variation of the electrostatic potential across the semiconductor-electrolyte junction is the key parameter that determines the cell performance. In principle, electric field induced second harmonic generation (EFISH) provides a contactless in situ spectroscopic tool to measure the spatial variation of electrostatic potential. However, the total second harmonic generation (SHG) signal contains the contributions of the EFISH signals of semiconductor space charge layer and the electric double layer, in addition to the SHG signal of the electrode surface. The interference of these complex quantities hinders their analysis. In this work, to understand and deconvolute their contributions to the total SHG signals, bias-dependent SHG measurements are performed on the rutile TiO2(100)-electrolyte junction as a function of light polarization and crystal azimuthal angle (angle of the incident plane relative to the crystal [001] axis). A quadratic response between SHG intensity and the applied potential is observed in both the accumulation and depletion regions of TiO2. The relative phase difference and amplitude ratio are extracted at selected azimuthal angles and light polarizations. At 0° azimuthal angle and s-in-p-out polarization, the SHG intensity minimum has the best match with the TiO2 flatband potential due to the orthogonal relative phase difference between bias-dependent and bias-independent SHG terms. We further measure the pH-dependent flatband potential and probe the photovoltage under open circuit conditions using the EFISH technique, demonstrating the capability of this contactless method for measuring electrostatic potential at semiconductor-electrolyte junctions.

Revealing the Optimization Route of Piezoelectric Sonosensitizers: From Mechanism to Engineering Methods

Piezoelectric catalysis is a novel catalytic technology that has developed rapidly in recent years and has attracted extensive interest among researchers in the field of tumor therapy for its acoustic-sensitizing properties. Nevertheless, researchers are still controversial about the key technical difficulties in the modulation of piezoelectric sonosensitizers for tumor therapy applications, which is undoubtedly a major obstacle to the performance modulation of piezoelectric sonosensitizers. Clarification of this challenge will be beneficial to the design and optimization of piezoelectric sonosensitizers in the future. Here, the authors start from the mechanism of piezoelectric catalysis and elaborate the mechanism and methods of defect engineering and phase engineering for the performance modulation of piezoelectric sonosensitizers based on the energy band theory. The combined therapeutic strategy of piezoelectric sonosensitizers with enzyme catalysis and immunotherapy is introduced. Finally, the challenges and prospects of piezoelectric sonosensitizers are highlighted. Hopefully, the explorations can guide researchers toward the optimization of piezoelectric sonosensitizers and can be applied in their own research.

Surface photovoltage microscopy for mapping charge separation on photocatalyst particles

Solar-driven photocatalytic reactions offer a promising route to clean and sustainable energy, and the spatial separation of photogenerated charges on the photocatalyst surface is the key to determining photocatalytic efficiency. However, probing the charge-separation properties of photocatalysts is a formidable challenge because of the spatially heterogeneous microstructures, complicated charge-separation mechanisms and lack of sensitivity for detecting the low density of separated photogenerated charges. Recently, we developed surface photovoltage microscopy (SPVM) with high spatial and energy resolution that enables the direct mapping of surface-charge distributions and quantitative assessment of the charge-separation properties of photocatalysts at the nanoscale, potentially providing unprecedented insights into photocatalytic charge-separation processes. Here, this protocol presents detailed procedures that enable researchers to construct the SPVM instruments by integrating Kelvin probe force microscopy with an illumination system and the modulated surface photovoltage (SPV) approach. It then describes in detail how to perform SPVM measurements on actual photocatalyst particles, including sample preparation, tuning of the microscope, adjustment of the illuminated light path, acquisition of SPVM images and measurements of spatially resolved modulated SPV signals. Moreover, the protocol also includes sophisticated data analysis that can guide non-experts in understanding the microscopic charge-separation mechanisms. The measurements are ordinarily performed on photocatalysts with a conducting substrate in gases or vacuum and can be completed in 15 h.

Charge redistribution of a spatially differentiated ferroelectric Bi4Ti3O12 single crystal for photocatalytic overall water splitting

Artificial photosynthesis is a promising approach to produce clean fuels via renewable solar energy. However, it is practically constrained by two issues of slow photogenerated carrier migration and rapid electron/hole recombination. It is also a challenge to achieve a 2:1 ratio of H2 and O2 for overall water splitting. Here we report a rational design of spatially differentiated two-dimensional Bi4Ti3O12 nanosheets to enhance overall water splitting. Such a spatially differentiated structure overcomes the limitation of charge transfer across different crystal planes in a single crystal semiconductor. The experimental results show a redistribution of charge within a crystal plane. The resulting photocatalyst produces 40.3 μmol h-1 of hydrogen and 20.1 μmol h-1 of oxygen at a near stoichiometric ratio of 2:1 and a solar-to-hydrogen efficiency of 0.1% under simulated solar light.

14.8% Quantum Efficient Gallium Phosphide Photocatalyst for Hydrogen Evolution

Gallium phosphide is an established photoelectrode material for H2 or O2 evolution from water, but particle-based GaP photocatalysts for H2 evolution are very rare. To understand the reasons, we investigated the photocatalytic H2 evolution reaction (HER) of suspended n-type GaP particles with iodide, sulfite, ferricyanide, ferrous ion, and hydrosulfide as sacrificial electron donors, and using Pt, RhyCr2-yO3, and Ni2P HER cocatalysts. A record apparent quantum efficiency of 14.8% at 525 nm was achieved after removing gallium and oxide charge trapping states from the GaP surface, adding a Ni2P cocatalyst to reduce the proton reduction overpotential, lowering the Schottky-barrier at the GaP-cocatalyst interface, adjusting the polarity of the depletion layer at the GaP-liquid interface, and optimizing the electrochemical potential of the electron donor. The work not only showcases the main factors that control charge separation in suspended photocatalysts, but it also explains why most known HER photocatalysts in the literature are based on n-type and not p-type semiconductors.

Spatiotemporal Visualization of Photogenerated Carriers on an Avalanche Photodiode Surface Using Ultrafast Scanning Electron Microscopy

The spatiotemporal evolution of photogenerated charge carriers on surfaces and at interfaces of photoactive materials is an important issue for understanding fundamental physical processes in optoelectronic devices and advanced materials. Conventional optical probe-based microscopes that provide indirect information about the dynamic behavior of photogenerated carriers are inherently limited by their poor spatial resolution and large penetration depth. Herein, we develop an ultrafast scanning electron microscope (USEM) with a planar emitter. The photoelectrons per pulse in this USEM can be two orders of magnitude higher than that of a tip emitter, allowing the capture of high-resolution spatiotemporal images. We used the contrast change of the USEM to examine the dynamic nature of surface carriers in an InGaAs/InP avalanche photodiode (APD) after femtosecond laser excitation. It was observed that the photogenerated carriers showed notable longitudinal drift, lateral diffusion, and carrier recombination associated with the presence of photovoltaic potential at the surface. This work demonstrates an in situ multiphysics USEM platform with the capability to stroboscopically record carrier dynamics in space and time.

Unraveling Spatiotemporal Transient Dynamics at the Nanoscale via Wavelet Transform-Based Kelvin Probe Force Microscopy

Mechanistic probing of surface potential changes arising from dynamic charge transport is the key to understanding and engineering increasingly complex nanoscale materials and devices. Spatiotemporal averaging in conventional heterodyne detection-based Kelvin probe force microscopy (KPFM) inherently limits its time resolution, causing an irretrievable loss of transient response and higher-order harmonics. Addressing this, we report a wavelet transform (WT)-based methodology capable of quantifying the sub-ms charge dynamics and probing the elusive transient response. The feedback-free, open-loop wavelet transform KPFM (OL-WT-KPFM) technique harnesses the WT's ability to simultaneously extract spatial and temporal information from the photodetector signal to provide a dynamic mapping of surface potential, capacitance gradient, and dielectric constant at a temporal resolution 3 orders of magnitude higher than the lock-in time constant. We further demonstrate the method's applicability to explore the surface-photovoltage-induced sub-ms hole-diffusion transient in bismuth oxyiodide semiconductor. The OL-WT-KPFM concept is readily applicable to commercial systems and can provide the underlying basis for the real-time analysis of transient electronic and electrochemical properties.

Constructing Type-II and S-Scheme Heterojunctions of Cu2O@Cu4(SO4)(OH)6·H2O Polyhedra by In Situ Etching Cu2O with Different Exposed Facets for Enhanced Photocatalytic Sterilization and Degradation Performance

The construction of type-II or S-scheme heterojunctions can effectively accelerate the directional migration of charge carriers and inhibit the recombination of electron-hole pairs to improve the catalytic performance of the composite catalyst; therefore, the construction and formation mechanism of a heterojunction are worth further investigation. Herein, Cu₂O@Cu₄(SO₄)(OH)₆·H₂O core-shell polyhedral heterojunctions were fabricated via in situ etching Cu₂O with octahedral, cuboctahedral, and cubic shapes by sodium thiosulfate (Na₂S₂O₃). Cu₂O@Cu₄(SO₄)(OH)₆·H₂O polyhedral heterojunctions demonstrated obviously enhanced sterilization and degradation performance than the corresponding single Cu₂O polyhedra and Cu₄(SO₄)(OH)₆·H₂O. When Cu₂O with a different morphology contacts with Cu₄(SO₄)(OH)₆·H₂O, a built-in electric field is established at the interface due to the difference in Fermi level (E_f); meanwhile, the direction of band bending and the band alignment are determined. These lead to the different migration pathways of electrons and holes, and thereby, a type-II or S-scheme heterojunction is constructed. The results showed that octahedral o-Cu₂O@Cu₄(SO₄)(OH)₆·H₂O is an S-scheme heterojunction; however, cuboctahedral co-Cu₂O@Cu₄(SO₄)(OH)₆·H₂O and cubic c-Cu₂O@Cu₄(SO₄)(OH)₆·H₂O are type-II heterojunctions. By means of X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), diffuse reflectance spectra (DRS), and Mott-Schottky analyses, the band alignments, Fermi levels, and band offsets (ΔE_CB, ΔE_VB) of Cu₂O@Cu₄(SO₄)(OH)₆·H₂O polyhedral heterojunctions were estimated; the results indicated that the catalytic ability of the composite catalyst is determined by the type of heterojunction and the sizes of band offsets. Cubic c-Cu₂O@Cu₄(SO₄)(OH)₆·H₂O has the strongest driving force (namely, biggest band offsets) to accelerate charge migration and effectively separate charge carriers, so it exhibits the strongest catalytic bactericidal and degrading abilities.

Photocatalysis screening for group III-V vdW heterostructures constructed by MX (M = Ga, In and X = P, As) monolayers

To harvest solar energy for water splitting and produce pollution-free hydrogen and oxygen, high-performance photocatalysts are essential. Here, by combining different two-dimensional (2D) group III-V MX (M = Ga, In and X = P, As) monolayers, we designed 144 van der Waals (vdW) heterostructures to identify efficient photoelectrochemical materials. Using first-principles calculations, we investigated the stabilities, electronic properties, and optical properties of these heterostructures. After a careful screening process, we elected GaP/InP in a BB-II stacking configuration as the most promising candidate. This specific GaP/InP configuration has a type-II band alignment with a gap value of 1.83 eV. The conduction band minimum (CBM) is located at -4.276 eV, and the valence band maximum (VBM) is located at -6.217 eV, fully satisfying the requirements of the catalytic reaction under pH = 0. Additionally, light absorption has been improved through the construction of the vdW heterostructure. These results could help in understanding the properties of the III-V heterostructures and guide the experimental synthesis of these materials for photocatalysis applications.

Strain insensitive flexible photodetector based on molybdenum ditelluride/molybdenum disulfide heterostructure

Flexible electronic and optoelectronic devices are highly desirable for various emerging applications, such as human-computer interfaces, wearable medical electronics, flexible display, etc. Layered two-dimensional (2D) material is one of the most promising types of materials to develop flexible devices due to its atomically thin thickness, which gives it excellent flexibility and mechanical endurance. However, the 2D material devices fabricated on flexible substrate inevitably suffer from mechanical deformation, which can severely affect device performances, resulting in function degradation and even failure. In this work, we propose a strain insensitive flexible photodetector based on MoS₂/MoTe₂heterostructure on polyimide substrate, which provides a feasible approach to cancel unpredicted impacts of strain on the device performances. Specifically, the MoS₂/MoTe₂heterostructure is deposited with 4 electrodes to form three independent devices of MoS₂FET, MoTe₂FET and MoS₂/MoTe₂heterojunction. Among them, the MoS₂/MoTe₂heterojunction is used as the photodetector, while the MoS₂FET is used as a strain gauge to calibrate the photo detection result. Such configuration is enabled by the Schottky barrier formed between the electrodes and the MoS₂flake, which leads to obvious and negligible photo response of MoS₂/MoTe₂heterojunction and MoS₂FET, respectively, under low source-drain bias (ex. 10 mV). The experimental results show that the proposed mechanism can not only calibrate the photo response to cancel strain effect, but also successfully differentiate the wavelength (with fixed power) or power (with fixed wavelength) of light illumination.

Direct In Situ Measurement of Quantum Efficiencies of Charge Separation and Proton Reduction at TiO2-Protected GaP Photocathodes

Photoelectrochemical solar fuel generation at the semiconductor/liquid interface consists of multiple elementary steps, including charge separation, recombination, and catalytic reactions. While the overall incident light-to-current conversion efficiency (IPCE) can be readily measured, identifying the microscopic efficiency loss processes remains difficult. Here, we report simultaneous in situ transient photocurrent and transient reflectance spectroscopy (TRS) measurements of titanium dioxide-protected gallium phosphide photocathodes for water reduction in photoelectrochemical cells. Transient reflectance spectroscopy enables the direct probe of the separated charge carriers responsible for water reduction to follow their kinetics. Comparison with transient photocurrent measurement allows the direct probe of the initial charge separation quantum efficiency (ϕ_CS) and provides support for a transient photocurrent model that divides IPCE into the product of quantum efficiencies of light absorption (ϕ_abs), charge separation (ϕ_CS), and photoreduction (ϕ_red), i.e., IPCE = ϕ_absϕ_CSϕ_red. Our study shows that there are two general key loss pathways: recombination within the bulk GaP that reduces ϕ_CS and interfacial recombination at the junction that decreases ϕ_red. Although both loss pathways can be reduced at a more negative applied bias, for GaP/TiO₂, the initial charge separation loss is the key efficiency limiting factor. Our combined transient reflectance and photocurrent study provides a time-resolved view of microscopic steps involved in the overall light-to-current conversion process and provides detailed insights into the main loss pathways of the photoelectrochemical system.

Emerging Chalcohalide Materials for Energy Applications

Semiconductors with multiple anions currently provide a new materials platform from which improved functionality emerges, posing new challenges and opportunities in material science. This review has endeavored to emphasize the versatility of the emerging family of semiconductors consisting of mixed chalcogen and halogen anions, known as "chalcohalides". As they are multifunctional, these materials are of general interest to the wider research community, ranging from theoretical/computational scientists to experimental materials scientists. This review provides a comprehensive overview of the development of emerging Bi- and Sb-based as well as a new Cu, Sn, Pb, Ag, and hybrid organic-inorganic perovskite-based chalcohalides. We first highlight the high-throughput computational techniques to design and develop these chalcohalide materials. We then proceed to discuss their optoelectronic properties, band structures, stability, and structural chemistry employing theoretical and experimental underpinning toward high-performance devices. Next, we present an overview of recent advancements in the synthesis and their wide range of applications in energy conversion and storage devices. Finally, we conclude the review by outlining the impediments and important aspects in this field as well as offering perspectives on future research directions to further promote the development of chalcohalide materials in practical applications in the future.

Engineering Vacancies at the 2D Nanocrystals for Robust Bifunctional Electrocatalysts

Hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) through water decomposition are feasible methods to produce green and clean energy. Herein, we report a facile two-step strategy for the preparation of non-noble metal defect-rich nanosheets by an electrochemical process at room temperature. First-principle calculations are used to study the bifunctional catalytic reaction mechanism of defect engineering in transition-metal dichalcogenides (TMDs); from the first-principle calculations, we predicted that the rich S vacancies on the nanosheet promoted electron transfer and reduced the energy barrier of electrocatalysis. As a substantiation, we conducted HER/OER electrochemical characterizations and found that the defect-rich atomic-thick tantalum sulfide is a kind of dual-function electrocatalyst with enhanced comprehensive properties of Tafel slope (39 mV/dec for HER, 38 mV/dec for OER) and low overpotential (0.099 V for HER, 0.153 V for OER) in acidic and alkaline environments, respectively. Likewise, the defect-rich catalysts exhibit high stability in acidic and alkaline solutions, which have potential applications as electrocatalysts for the large-scale production of hydrogen and oxygen.

Improved Ultrafast Carrier Relaxation and Charge Transfer Dynamics in CuI Films and Their Heterojunctions via Sn Doping

CuI is one of the promising hole transport materials for perovskite solar cells. However, its tendency to form defects is currently limiting its use for device applications. Here, we report the successful improvement of CuI through Sn doping and the direct measurement of the carrier relaxation and interfacial charge-transfer processes in Sn-doped CuI films and their heterostructures. Femtosecond-transient absorption (fs-TA) measurements reveal that Sn doping effectively passivates the trap states within the bandgap of CuI. The I-V characteristics of heterostructures demonstrate drastic improvement in transport characteristics upon Sn doping. Fs-TA measurements further confirm that the CuSnI/ZnO heterojunction has a type-II configuration with ultrafast charge transfer (<280 fs). The charge transfer time of a CuI/ZnO heterostructure is ∼2.8 times slower than that of the CuSnI/ZnO heterostructure, indicating that Sn doping suppresses the interfacial states that retard the charge transfer. These results elucidate the effect of Sn doping on the performance of CuI-based heterostructures.

Spatiotemporal imaging of charge transfer in photocatalyst particles

The water-splitting reaction using photocatalyst particles is a promising route for solar fuel production^1-4. Photo-induced charge transfer from a photocatalyst to catalytic surface sites is key in ensuring photocatalytic efficiency⁵; however, it is challenging to understand this process, which spans a wide spatiotemporal range from nanometres to micrometres and from femtoseconds to seconds^6-8. Although the steady-state charge distribution on single photocatalyst particles has been mapped by microscopic techniques^9-11, and the charge transfer dynamics in photocatalyst aggregations have been revealed by time-resolved spectroscopy^12,13, spatiotemporally evolving charge transfer processes in single photocatalyst particles cannot be tracked, and their exact mechanism is unknown. Here we perform spatiotemporally resolved surface photovoltage measurements on cuprous oxide photocatalyst particles to map holistic charge transfer processes on the femtosecond to second timescale at the single-particle level. We find that photogenerated electrons are transferred to the catalytic surface quasi-ballistically through inter-facet hot electron transfer on a subpicosecond timescale, whereas photogenerated holes are transferred to a spatially separated surface and stabilized through selective trapping on a microsecond timescale. We demonstrate that these ultrafast-hot-electron-transfer and anisotropic-trapping regimes, which challenge the classical perception of a drift-diffusion model, contribute to the efficient charge separation in photocatalysis and improve photocatalytic performance. We anticipate that our findings will be used to illustrate the universality of other photoelectronic devices and facilitate the rational design of photocatalysts.

Observation of polarity-switchable photoconductivity in III-nitride/MoSx core-shell nanowires

III-V semiconductor nanowires are indispensable building blocks for nanoscale electronic and optoelectronic devices. However, solely relying on their intrinsic physical and material properties sometimes limits device functionalities to meet the increasing demands in versatile and complex electronic world. By leveraging the distinctive nature of the one-dimensional geometry and large surface-to-volume ratio of the nanowires, new properties can be attained through monolithic integration of conventional nanowires with other easy-synthesized functional materials. Herein, we combine high-crystal-quality III-nitride nanowires with amorphous molybdenum sulfides (a-MoS_x) to construct III-nitride/a-MoS_x core-shell nanostructures. Upon light illumination, such nanostructures exhibit striking spectrally distinctive photodetection characteristic in photoelectrochemical environment, demonstrating a negative photoresponsivity of -100.42 mA W^-1 under 254 nm illumination, and a positive photoresponsivity of 29.5 mA W^-1 under 365 nm illumination. Density functional theory calculations reveal that the successful surface modification of the nanowires via a-MoS_x decoration accelerates the reaction process at the electrolyte/nanowire interface, leading to the generation of opposite photocurrent signals under different photon illumination. Most importantly, such polarity-switchable photoconductivity can be further tuned for multiple wavelength bands photodetection by simply adjusting the surrounding environment and/or tailoring the nanowire composition, showing great promise to build light-wavelength controllable sensing devices in the future.

Unraveling Charge-Separation Mechanisms in Photocatalyst Particles by Spatially Resolved Surface Photovoltage Techniques

The photocatalytic conversion of solar energy offers a potential route to renewable energy, and its efficiency relies on effective charge separation in nanostructured photocatalysts. Understanding the charge-separation mechanism is key to improving the photocatalytic performance and this has now been enabled by advances in the spatially resolved surface photovoltage (SRSPV) method. In this Review we highlight progress made by SRSPV in mapping charge distributions at the nanoscale and determining the driving forces of charge separation in heterogeneous photocatalyst particles. We discuss how charge separation arising from a built-in electric field, diffusion, and trapping can be exploited and optimized through photocatalyst design. We also highlight the importance of asymmetric engineering of photocatalysts for effective charge separation. Finally, we provide an outlook on further opportunities that arise from leveraging these insights to guide the rational design of photocatalysts and advance the imaging technique to expand the knowledge of charge separation.

Designing Self-Adaptive Donor-Switch-Acceptor for Molecular Opto-Electronic Conversion Based on Dimethyldihydropyrene/Cyclophanediene

Introduction of self-adaptive molecular switch is an appealing strategy to achieve complete charge separation (CS) in donor-acceptor (D-A) systems. Here we designed donor-switch-acceptor (D-S-A) systems using the platinum(II) terpyridyl complex as the acceptor, the dimethyldihydropyrene /cyclophanediene (DHP/CPD) as the bridge, and the methoxybenzene, thieno[3,​2-​ b ]thiophene, 2,2'-bifuran, and 4,8-dimethoxybenzo[1,2-b:4,5-b']difuran as the donors, respectively. We then systematically studied the whole opto-electronic conversion process of the donor-DHP/CPD-acceptor (D-DHP/CPD-A) systems based on time-dependent density functional theory, time-dependent ultrafast electron evolution, and electron transport property calculations. We first found that the substitution of -CH 3 by -H and -CN groups in DHP/CPD can enlarge the range of the adsorption wavenumber in opto-electric conversion. Then the light absorption induces the cationization of DHP switch, largely accelerating the forth-isomerization to CPD form. Once the D-CPD-A molecule is formed, the poor conjugation can realize the complete CS state by inhibiting the radiative and nonradiative charge recombinations. Finally, the repeatable and complete CS can be achieved through the automatic back-isomerization of CPD to DHP. The present work provides valuable insights into design of D-S-A systems for practical utilization of molecule-based solar harvesting.

Probing Longitudinal Carrier Transport in Perovskite Thin Films via Modified Transient Reflection Spectroscopy

Accurate characterization of the longitudinal (along the thickness direction) carrier transport property is of significant importance for evaluating the quality and performance of perovskite thin films. Herein, we report the development of a modified transient reflection (TR) spectroscopy method to realize the direct observation and determination of the longitudinal carrier transport process in MAPbI₃ polycrystalline thin films. Unlike the traditional TR spectroscopy, the carrier transport dynamics along the film thickness is resolved by making the pump (excitation) and probe beams spatially separated on each side of the film, so that the carrier transport from the excitation side to the probe side is directly captured. Utilizing this method, the longitudinal carrier diffusion coefficients (D) in various perovskite films with different thicknesses and grain sizes (extracted from SEM images) are determined, showing D values of ∼1.5 to 1.8 cm² s⁻¹ (∼0.5 to 0.8 cm² s⁻¹) for films with grain size larger (smaller) than the thickness. This empirical correlation between the longitudinal D and film thickness/grain size provides a reference for quick quality screening and evaluation of perovskite polycrystalline thin films.

A back-excitation transient reflection spectroscopy was developed to visualize longitudinal carrier transport in perovskite films, showing that the longitudinal diffusion coefficient decreases sharply with increasing thickness-to-grain-size ratio.

Nanoscale TiO2 Protection Layer Enhances the Built-In Field and Charge Separation Performance of GaP Photoelectrodes

Nanoscale oxide layer protected semiconductor photoelectrodes show enhanced stability and performance for solar fuels generation, although the mechanism for the performance enhancement remains unclear due to a lack of understanding of the microscopic interfacial field and its effects. Here, we directly probe the interfacial fields at p-GaP electrodes protected by n-TiO₂ and its effect on charge carriers by transient reflectance spectroscopy. Increasing the TiO₂ layer thickness from 0 to 35 nm increases the field in the GaP depletion region, enhancing the rate and efficiency of interfacial electron transfer from the GaP to TiO₂ on the ps time scale as well as retarding interfacial recombination on the microsecond time scale. This study demonstrates a general method for providing a microscopic view of the photogenerated charge carrier's pathway and loss mechanisms from the bulk of the electrode to the long-lived separated charge at the interface that ultimately drives the photoelectrochemical reactions.

Tuning p-Si(111) Photovoltage via Molecule|Semiconductor Electronic Coupling

Photoelectrochemical (PEC) device efficiency depends heavily on the energetics and band alignment of the semiconductor|overlayer junction. Exerting energetic control over these junctions via molecular functionalization is an extremely attractive strategy. Herein we report a study of the structure-function relationship between chemically functionalized pSi(111) and the resulting solar fuels performance. Specifically, we highlight the interplay of chemical structure and electronic coupling between the attached molecule and the underlying semiconductor. Covalent attachment of aryl surface modifiers (phenyl, Ph; nitrophenyl, PhNO₂; anthracene, Anth; and nitroanthracene, AnthNO₂) resulted in high-fidelity surfaces with low defect densities (S < 50 cm/s). Electrochemical characterization of these surfaces in contact with methyl viologen resulted in systematically shifted band edges (up to 0.99 V barrier height) and correspondingly high photoelectrochemical performance (V_oc up to 0.43 V vs MV²⁺) consistent with the introduction of a positive interfacial dipole. We extend this functionalization to HER conditions and demonstrate systematic tuning of the HER V_oc using pSi(111)-R|TiO₂|Pt architecture. Correlation of the shifts in barrier height with the photovoltage provides evidence for nonideality despite low surface recombination. Critically, DFT calculations of the electronic structure of the organic-functionalized interfaces show that the molecule-based electronic states effectively hybridized with the silicon band edges. A comparison of these interfacial states with their isolated molecular analogues further confirms electronic coupling between the attached molecule and the underlying semiconductor, providing an induced density of interfacial states (IDIS) which decreases the potential drop across the semiconductor. These results demonstrate the delicate interplay between interfacial chemical structure, interfacial dipole, and electronic structure.

Activating Co nanoparticles on graphitic carbon nitride by tuning the Schottky barrier via P doping for the efficient dehydrogenation of ammonia-borane

A highly active Mott–Schottky nanocatalyst for the efficient dehydrogenation of ammonia-borane was constructed by rationally tuning the Schottky barrier of Co/P_xCN (P-doped g-C₃N₄) via simply varying the doping amount of P atoms.

Transient Evolution of the Built-in Field at Junctions of GaAs

Built-in electric fields at semiconductor junctions are vital for optoelectronic and photocatalytic applications since they govern the movement of photogenerated charge carriers near critical surfaces and interfaces. Here, we exploit transient photoreflectance (TPR) spectroscopy to probe the dynamical evolution of the built-in field for n-GaAs photoelectrodes upon photoexcitation. The transient fields are modeled in order to quantitatively describe the surface carrier dynamics that influence those fields. The photoinduced surface field at different types of junctions between n-GaAs and n-TiO2, Pt, electrolyte and p-NiO are examined, and the results reveal that surface Fermi-level pinning, ubiquitous for many GaAs surfaces, can have beneficial consequences that impact photoelectrochemical applications. That is, Fermi-level pinning results in the primary surface carrier dynamics being invariant to the contacting layer and promotes beneficial carrier separation. For example, when p-NiO is deposited there is no Fermi-level equilibration that modifies the surface field, but photogenerated holes are promoted to the n-GaAs/p-NiO interface and can transfer into defect midgap states within the p-NiO resulting in an elongated charge separation time and those transferred holes can participate in chemical reactions. In contrast, when the Fermi-level is unpinned via molecular surface functionalization on p-GaAs, the carriers undergo surface recombination faster due to a smaller built-in field, thus potentially degrading their photochemical performance.

Nickel-cobalt bimetallic sulfide NiCo2S4 nanostructures for a robust hydrogen evolution reaction in acidic media

There are many challenges associated with the fabrication of efficient, inexpensive, durable and very stable nonprecious metal catalysts for the hydrogen evolution reaction (HER). In this study, we have designed a facile strategy by tailoring the concentration of precursors to successfully obtain nickel–cobalt bimetallic sulfide (NiCo₂S₄) using a simple hydrothermal method. The morphology of the newly prepared NiCo₂S₄ comprised a mixture of microparticles and nanorods, which were few microns in dimension. The crystallinity of the composite sample was found to be excellent with a cubic phase. The sample that contained a higher amount of cobalt compared to nickel and produced single-phase NiCo₂S₄ exhibited considerably improved HER performance. The variation in the salt precursor concentration during the synthesis of a material is a simple methodology to produce a scalable platinum-free catalyst for HER. The advantageous features of the multiple active sites of cobalt in the CN-21 sample as compared to that for pristine CoS and NiS laid the foundation for the provision of abundant active edges for HER. The composite sample produced a current density of 10 mA cm⁻² at an overpotential of 345 mV. Also, it exhibited a Tafel value of 60 mV dec⁻¹, which predominantly ensured rapid charge transfer kinetics during HER. CN-21 was highly durable and stable for 30 hours. Electrochemical impedance spectroscopy showed that the charge transfer resistance was 21.88 ohms, which further validated the HER polarization curves and Tafel results. CN-21 exhibited a double layer capacitance of 4.69 μF cm⁻² and a significant electrochemically active surface area of 134.0 cm², which again supported the robust efficiency for HER. The obtained results reveal that our developed NiCo₂S₄ catalyst has a high density of active edges, and it is a non-noble metal catalyst for the hydrogen evolution reaction. The present findings provide an alternative strategy and an active nonprecious material for the development of energy-related applications.

There are many challenges associated with the fabrication of efficient, inexpensive, durable and very stable nonprecious metal catalysts for the hydrogen evolution reaction (HER).

2D-3D Cs2PbI2Cl2-CsPbI2.5Br0.5 Mixed-Dimensional Films for All-Inorganic Perovskite Solar Cells with Enhanced Efficiency and Stability

The phase instability of cesium lead halide perovskite is still a substantial challenge hindering its application. A 2D-3D all-inorganic Cs₂PbI₂Cl₂-CsPbI_2.5Br_0.5 perovskite solar cell was successfully developed to address this issue. The 2D Cs₂PbI₂Cl₂ phase distributed among the grain boundaries of the 3D CsPbI_3-xBr_x grains. The existence of Cs₂PbI₂Cl₂ effectively facilitated the (100) preferential crystal orientation of the CsPbI_2.5Br_0.5 crystals, promoting the carrier transport. The smooth transition region between the (003)_2D//(001)_3D interface indicated the formation of a 2D-3D heterostructure. Due to the improved crystal quality, high uniformity, and repeatability, the efficiency of the solar cells with areas of 0.09, 1, and 2 cm² significantly improved to 15.09%, 12.74%, and 10.01%, respectively. The power conversion efficiency (PCE) retained 95.3% of the initial efficiency after 60 days in a nitrogen atmosphere at room temperature and 80% of the initial efficiency at a humidity of 70 ± 10% relative humidity (RH) under continuous heating at 80 °C for 12 h.

Hot-carrier transfer at photocatalytic silicon/platinum interfaces

Interfacial charge transfer from silicon to heterogeneous catalysts plays a key role in silicon-based photoelectrochemical systems. In general, prior to interfacial charge transfer, carriers that are generated by photons with energies above the bandgap dissipate the excess kinetic energy via hot-carrier cooling, and such energy loss limits the maximum power conversion efficiency. The excess energy of hot-carriers, however, could be utilized through hot-carrier transfer from silicon to the catalysts, but such hot-carrier extraction has not yet been demonstrated. Here, we exploit transient reflection spectroscopy to interrogate charge transfer at the interface between silicon and platinum. Quantitative modeling of the surface carrier kinetics indicates that the velocity of charge transfer from silicon to platinum exceeds 2.6 × 10⁷ cm s^-1, corresponding to an average carrier temperature of extracted carriers of ∼600 K, two times higher than the lattice temperature. The charge transfer velocity can be controllably reduced by inserting silica spacing layers between silicon and platinum.

Metal-free photocatalysts for hydrogen evolution

This article provides a comprehensive review of the latest progress, challenges and recommended future research related to metal-free photocatalysts for hydrogen productionviawater-splitting.

The elusive photocatalytic water splitting reaction using sunlight on suspended nanoparticles: is there a way forward?

For many decades hydrogen production from water by photocatalytic methods has been pursued over a variety of semiconductor powder catalysts featuring many structures and compositions. The stoichiometric formation of molecular hydrogen and oxygen has stayed largely elusive.

Interlayer Photoelectron Transfer Boosted by Bridged RuIV Atoms in GaS Nanosheets for Efficient Water Splitting

Photocatalytic water splitting over layered nanosheet (NS) catalysts has caught a lot of attention for renewable hydrogen fuel production. However, the weak van der Waals interlayer interactions make it a great challenge to realize an effective dissociation of photogenerated excitons and efficient charge transfer across the interior of layered catalysts during the photocatalysis process. Here, we propose an intercalation strategy of high-valence Ru^IV atoms to render two-dimensional GaS NS photocatalysts with rapid electron-hole dissociation and long photocarrier lifetime in visible-light-driven water splitting. Experimental and theoretical results unravel that the intercalated single-site Ru, confined in interlayer of GaS NSs, with a hexagonal structural configuration of "Ru₁-S₆", can serve as an electron-trapped high-speed channel toward simultaneously accelerating electron-hole pairs dissociation and promoting photoelectron transportation through the van der Waals interlayer. Consequently, the as-developed Ru-intercalated GaS NSs can give a notable H₂ production rate of 340 μmol g^-1 h^-1 under visible-light irradiation and an apparent yield of 7% at 420 nm, 38 times that of pure GaS NSs. This study opens up a feasible way for a new design of highly active layered photocatalysts toward high-efficiency solar energy conversion.

High performance III-V photoelectrodes for solar water splitting via synergistically tailored structure and stoichiometry

Catalytic interface of semiconductor photoelectrodes is critical for high-performance photoelectrochemical solar water splitting because of its multiple roles in light absorption, electrocatalysis, and corrosion protection. Nevertheless, simultaneously optimizing each of these processes represents a materials conundrum owing to conflicting requirements of materials attributes at the electrode surface. Here we show an approach that can circumvent these challenges by collaboratively exploiting corrosion-resistant surface stoichiometry and structurally-tailored reactive interface. Nanoporous, density-graded surface of 'black' gallium indium phosphide (GaInP₂), when combined with ammonium-sulfide-based surface passivation, effectively reduces reflection and surface recombination of photogenerated carriers for high efficiency photocatalysis in the hydrogen evolution half-reaction, but also augments electrochemical durability with lifetime over 124 h via strongly suppressed kinetics of corrosion. Such synergistic control of stoichiometry and structure at the reactive interface provides a practical pathway to concurrently enhance efficiency and durability of semiconductor photoelectrodes without solely relying on the development of new protective materials.

Giant Defect-Induced Effects on Nanoscale Charge Separation in Semiconductor Photocatalysts

Defects can markedly impact the performance of semiconductor-based photocatalysts, where the spatial separation of photogenerated charges is required for converting solar energy into fuels. However, understanding exactly how defects affect photogenerated charge separation at nanometer scale remains quite challenging. Here, using time- and space-resolved surface photovoltage approaches, we demonstrate that the distribution of surface photogenerated charges and the direction of photogenerated charge separation are determined by the defects distributed within a 100 nm surface region of a photocatalytic Cu₂O particle. This is enabled by the defect-induced charge separation process, arising from the trapping of electrons at the near-surface defect states and the accumulation of holes at the surface states. More importantly, the driving force for defect-induced charge separation is greater than 4.2 kV/cm and can be used to drive photocatalytic reactions. These findings highlight the importance of near-surface defect engineering in promoting photogenerated charge separation and manipulating surface photogenerated charges; further, they open up a powerful avenue for improving photocatalytic charge separation and solar energy conversion efficiency.

Ultrafast probes at the interfaces of solar energy conversion materials

Transient reflection, photoreflectance and attenuated total reflection spectroscopy are developed to understand the ultrafast interfacial dynamics of solar conversion materials.

Inorganic semiconductor biointerfaces

Biological systems respond to and communicate through biophysical cues, such as electrical, thermal, mechanical and topographical signals. However, precise tools for introducing localized physical stimuli and/or for sensing biological responses to biophysical signals with high spatiotemporal resolution are limited. Inorganic semiconductors display many relevant electrical and optical properties, and they can be fabricated into a broad spectrum of electronic and photonic devices. Inorganic semiconductor devices enable the formation of functional interfaces with biological material, ranging from proteins to whole organs. In this Review, we discuss fundamental semiconductor physics and operation principles, with a focus on their behaviour in physiological conditions, and highlight the advantages of inorganic semiconductors for the establishment of biointerfaces. We examine semiconductor device design and synthesis and discuss typical signal transduction mechanisms at bioelectronic and biophotonic interfaces for electronic and optoelectronic sensing, optoelectronic and photothermal stimulation and photoluminescent in vivo imaging of cells and tissues. Finally, we evaluate cytotoxicity and highlight possible new material components and biological targets of inorganic semiconductor devices.

Electrically tunable optical properties of few-layer black arsenic phosphorus

Black arsenic phosphorus (b-AsP) is a promising two-dimensional material for various optoelectronic applications, bridging the wavelength gap between two-dimensional molybdenum disulfide and graphene. In particular, it has intriguing potential in photodetectors and great advantages in the mid-infrared field. However, its optoelectronic modulation has yet to be elucidated, which requires a fundamental understanding of its field-effect optical modulation. Here, we report the measurements of the lower-energy infrared anisotropic optical response of thin b-AsP under different electrical gating. We reveal that in addition to band edge absorption, amplitude modulation of sub-band absorption up to ten percent is also obtained in reflection extinction. These in-gap absorptions are attributed to spin-orbital coupling and free carrier absorption. Our results suggest the important potential for use of b-AsP in mid-infrared optoelectronic modulator applications.

Time-Resolved Observations of Photo-Generated Charge-Carrier Dynamics in Sb2Se3 Photocathodes for Photoelectrochemical Water Splitting

Solar-energy conversion by photoelectrochemical (PEC) devices is driven by the separation and transfer of photogenerated charge carriers. Thus, understanding carrier dynamics in a PEC device is essential to realizing efficient solar-energy conversion. Here, we investigate time-resolved carrier dynamics in emerging low-cost Sb₂Se₃ nanostructure photocathodes for PEC water splitting. Using terahertz spectroscopy, we observed an initial mobility loss within tens of picoseconds due to carrier localization and attributed the origin of carrier localization to the rich surface of Sb₂Se₃ nanostructures. In addition, a possible recombination at the interface between Sb₂Se₃ and the back contact is elucidated by time-resolved photoluminescence analysis. We also demonstrated the dual role of the RuO _x co-catalyst in reducing surface recombination and enhancing charge transfer in full devices using intensity-modulated spectroscopy. The relatively low onset potential of the Sb₂Se₃ photocathode is attributed to the sluggish charge transfer at a low applied bias rather than to fast surface recombination. We believe that our insights on carrier dynamics would be an important step toward achieving highly efficient Sb₂Se₃ photocathodes.

2D Polymers as Emerging Materials for Photocatalytic Overall Water Splitting

Converting solar energy into storable and transportable chemical fuels using artificial photosynthetic systems can provide an alternative route to the current unsustainable use of fossil fuels, addressing the worldwide energy crisis and environmental issues. Recently, semiconducting polymers have emerged as a very promising class of photocatalysts for water splitting as their electronic and structural properties can be conveniently controlled and systematically designed at a molecular level. Among the various polymer photocatalysts that are reported so far, 2D polymer nanosheets are particularly interesting and gaining more attention. The 2D planar structure offers unique features such as high surface area, abundant surface active sites, efficient charge separation, and facile formation of heterostructures. The design and synthesis of 2D polymer nanosheets have greatly advanced the research in photocatalytic overall water splitting. Here, recent advances in developing photocatalysts based on 2D polymer nanosheets for photocatalytic overall water splitting are highlighted. Specifically, the existing approaches to tune their electronic structures and surface active sites for photocatalysis are discussed. Future opportunities and challenges for developing 2D polymers for photocatalytic overall water splitting are also included.

Tuning the Intrinsic Properties of Carbon Nitride for High Quantum Yield Photocatalytic Hydrogen Production

The low quantum yield of photocatalytic hydrogen production in carbon nitride (CN) has been improved upon via the modulation of both the extrinsic and intrinsic properties of the material. Although the modification of extrinsic properties has been widely investigated in the past, recently there has been growing interest in the alteration of intrinsic properties. Refining the intrinsic properties of CN provides flexibility in controlling the charge transport and selectivity in photoredox reactions, and therefore makes available a pathway toward superior photocatalytic performance. An analysis of recent progress in tuning the intrinsic photophysical properties of CN facilitates an assessment of the goals, achievements, and gaps. This article is intended to serve this purpose. Therefore, selected techniques and mechanisms of the tuning of intrinsic properties of CN are critically discussed here. This article concludes with a recommendation of the issues that need to be considered for the further enhancement in the quantum efficiency of CN photocatalysts.