Ultrafast water permeation through nanochannels with a densely fluorous interior surface

Rapid Water Permeation by Aramid Foldamer Nanochannels With Hydrophobic Interiors

Aquaporins are natural proteins that rapidly transport water across cell membranes, maintaining homeostasis, whilst strictly excluding salt. This has inspired their use in water purification and desalination, a critical emerging need. However, stability, scalability, and cost have prevented their widespread adoption in water purification membrane technologies. As such, attention has turned to the use of artificial water channels, with pore-functionalized polymers and macrocycles providing a powerful alternative. Whilst impressive rates of transport have been achieved, the combination of a scalable, high-yielding synthesis and efficient transport has not yet been reported. Herein, we report such a system, with densely functionalized channel interiors, synthesized by high-yielding living polymerization with low polydispersities, showing high salt exclusion and excellent water transport rates. Our aramid foldamers create artificial water channels with hydrophobic interiors and single-channel water permeability rates of up to 108 water molecules per second per channel, approaching the range of natural aquaporins (c. 109). We show that water transport rates closely correspond to the helical length, with the polymer that most closely matches bilayer thickness showing optimal efficacy, as supported by molecular dynamics (MD) simulations. Our work provides a basis for the scalable synthesis of next-generation artificial water channels.

Mechanical Flexibility Improves Thermal Conduction of Confined Liquid in Nanofluidics

Nanofluidics systems demonstrate the potential to address the thermal management challenge in nanoelectronics devices with extraordinary transport properties. However, the phonon features in different substrates have led to contradictory thermal transport properties of the confined liquid. Understanding the correlation between the thermal transport of nanoconfined liquid and substrate vibration is of critical importance. Herein, we demonstrate that the phonon resonance between the substrates and the confined water molecules can significantly enhance the thermal conductivity of the water. Detailed analyses reveal that the phonon resonance shortens the lifetime of hydrogen bonds, promotes the mobility of the water molecules, and enhances the thermal conductivity. Moreover, the effect of phonon resonance is more pronounced with a reduced channel size owing to stronger solid-liquid interactions. These results and findings offer a fundamental understanding of the thermal transport of the nanoconfined liquid and provide theoretical guidance for developing nanofluidics-based cooling strategies.

Tuning the free energy of host-guest encapsulation by cosolvent

Supramolecular hosts create unique microenvironments which enable the tuning of reactions via steric confinement and electrostatics. It has been shown that "solvent shaping inside hydrophobic cavities" is an important thermodynamic driving force for guest encapsulation in the nanocage host. Here, we show that even small (5%) changes in the solvent composition can have a profound impact on the free energy of encapsulation. In a combined THz, NMR and ab initio MD study, we reveal that the preferential residing of a single DMSO molecule in the cavity upon addition of ≥5% DMSO results in a considerable change of ΔS from 63-76 cal mol-1 K-1 to 23-24 cal mol-1 K-1. This can be rationalized by reduction of the cavity volume due to the DMSO molecule which resides preferentially in the cavity. These results provide novel insights into the guest-binding interactions, emphasizing that the entropic driving force is notably influenced by even small changes in the solvent composition, irrespective of changes in metal ligand vertices. Having demonstrated that the local solvent composition within the cage is essential for regulating catalytic efficiency, solvent tuning might enable novel applications in supramolecular chemistry in catalysis and chemical separation.

Fluorinated Covalent Organic Framework Membranes with Robust Wetting Resistance for Durable Membrane Distillation

Membrane distillation (MD) is a promising separation technique for producing pure water from brine using low-grade heat. Covalent organic framework (COF) membranes with high porosity and well-ordered pore structure exhibit excellent flux and salt rejection during MD. However, long-term MD operation is often restricted by the inevitable gradual wetting of COF membranes, which causes deterioration of salt rejection, primarily resulting from the lack of intrinsic hydrophobicity. Herein, a fluorinated COF (TGTf) membrane with intrinsic hydrophobicity and excellent anti-wetting property is reported. Under 65 °C and 12 kPa operation pressure, the TGTf membrane maintained a high water flux of 195 L m-2 h-1 and a salt rejection of 99.80% over 168 h of MD operation, which is the longest operation time ever reported for MD using COF membranes. In addition, the TGTf membrane showed unparalleled resistance to scaling and organic fouling, demonstrating great potential for real-world brine treatment. Experimental and simulation studies revealed that incorporation of fluorine atom not only enhanced the hydrophobicity of the COF membrane, but also created electrostatic barriers within the fluorinated nanochannels, efficiently preventing ion penetration. These results underscore the remarkable potential of fluorinated COF membranes in MD, offering a promising solution for sustainable brine desalination.

Dicarboxylate recognition based on ultracycle hosts through cooperative hydrogen bonding and anion-π interactions

The efficient binding of dicarboxylates represents an important yet challenging issue in supramolecular chemistry. In this study, we designed functional ultracycles as hosts to accommodate large organic dicarboxylate anions. These ultracycles were synthesized via a one-pot strategy starting from macrocyclic precursors. Host-dicarboxylate binding was investigated using 1H NMR titrations, revealing that B4aH exhibits strong binding affinities toward a series of dicarboxylates, with association constants reaching up to 6896 M-1. The selectivity for heptanedioate (C7 2- ) was attributed to cooperative hydrogen bonding, anion-π interactions, and a size-matching effect, as supported by DFT optimizations.

Degradation of Hydrogen Bonds Enormously Enhances Convective Heat Transfer in Nanofluidics

The ultrafast mass transport of liquid through nanochannels holds promising potential to tackle the challenge of thermal management in high-power-density electronic devices. However, convective heat transfer in underpinned nanofluidics-based environments remains elusive. Here, we report with atomistic simulations that the convective heat transfer in nanochannels can be enhanced by ∼50% due to the deterioration of hydrogen bonds subjected to internal stress. The degraded hydrogen bonds largely weaken the intrinsic constraints by local confinement, significantly promoting the mobility of the confined liquid molecules, which facilitates phonon transmission for rapid heat transfer. The internal stress is further elucidated and quantitatively correlated with the convective heat transfer through the development of a thermal-mechanics scaling law that incorporates the Nusselt number and the interaction energy between the nanoconfined liquid and solid. This work provides theoretical insights for designing nanofluidics-based cooling strategies to meet stringent thermal dissipation requirements of high-power-density electronics.

Rolling two-dimensional covalent organic framework (COF) sheets into one-dimensional electronic and proton-conductive nanotubes

Mimicking the interconvertible carbon allotropes of 2-dimensional (2D) graphene and 1-dimensional (1D) carbon nanotubes (CNTs), herein we report the in situ transformation of 2D π-conjugated covalent organic frameworks (COFs) sheet into 1D nanotubular structures via self-assembly the sheets at solvent interfaces. The facile "roll-sheets" self-assembly resulted in coaxial nanotubes with uniform cross-sectional diameter, which was realized for diazapyrene-based COFs but not for the corresponding pyrene COF, although both possess similar chemical structures. Upon replacing the carbon atoms at 2,7-positions of pyrene with nitrogen, contrasting optical and electronic properties were realized, reflecting the rolled structure of the conjugated 2D sheets. The nanotubes exhibited concerted electronic- and proton-conducting nature with stable conducting pathways at ambient conditions. The nitrogen centers act simultaneously as the site for charge carrier doping and proton acceptors, as evidenced by the high photo- and electrical conductivity, as well as the record proton conductivity (σ = 1.98 S cm-1) results. The present diazapyrene-based 1D nanotubular COF serves as a unique materials platform with electronic conduction in the wall and proton conduction in the core, respectively.

Fast water transport and ionic sieving in ultrathin stacked nanoporous 2D membranes

Atomically thin nanoporous 2D membranes, featuring unique sieving characteristics for molecules and ions, have significant potential for seawater desalination. However, they face a common trade-off between permeability and selectivity. Here, we report an ultrathin stacked nanoporous graphene membrane (SNGM) created by layering atomically thin graphene nanomesh. This design achieves highly efficient and selective sieving of water molecules and ions. The SNGMs showcase in-plane nanopores for optimal size-exclusive water input and output, and interlayer 2D nanochannels between adjacent graphene nanomesh membranes for rapid water transport and precise ion/molecular sieving. The resulting SNGMs effectively address the trade-off between water permeability and ion selectivity in conventional desalination membranes, delivering a water permeability of ∼ 1-2 orders of magnitude higher than that of commercial membranes, while maintaining a comparable ion rejection ratio (>95% for NaCl). This advance marks a significant leap forward in adopting 2D nanoporous membranes for desalination technology.

Mechanically Compatible Sealing of Hydrogel with Coherent Interface

Long-term operation of hydrogels relies on protective coatings to avoid water swelling or evaporation, but these protections often cause substantial decreases in overall softness and stretchability. Here, a mechanically compatible seal with a coherent interfacial design is developed to encapsulate hydrogels. This seal is made from polybutylene (PIB) and polypropylene-graft-maleic anhydride (PP-g-MAH) blended poly(styrene-isobutylene-styrene) (SIBS). The PIB oligomers soften the SIBS networks, while the MAH groups facilitate covalent bonding between the SIBS and hydrogel. The sealed hydrogel exhibits an elastic modulus of 24 kPa and an elongation at a break of >1000%, both comparable to those of the pristine hydrogel. The adhesion energy between the seal and hydrogel reached >140 J m-2 and can be further increased to >400 J m-2 by a thermal treatment. This tough interface, together with the intrinsically low water vapor transmission rate of SIBS, allows the sealed hydrogel to maintain its modulus and stretchability after 10 days of drying in air. The sealed hydrogel is chemically and mechanically stable under harsh conditions, including acidic/alkaline/salty solutions, high temperatures, and cyclic mechanical deformation. This strategy applies to various hydrogels with diverse compositions and structures, leading to orders of magnitude improvements in the longevity of hydrogel-based electronic devices.

Tillandsia-Inspired Asymmetric Covalent Organic Framework Membranes for Unidirectional Low-Friction Water Collection

Friction plays a pivotal role in many phenomena of physical chemistry and has long been in the focus of research thereof. As a crucial parameter, friction in membranes' inner and/or outer surface can be minimized to reduce solvent inlet resistance and enlarge inner pore fluid flux, ideally reaching near frictionless transport of water at nanoscale. Inspired by the leaf structure of Tillandsia, a porous membrane with a rough surface and a hydrophilic inlet together with hydrophobic pore channels was designed and fabricated, based on covalent organic frameworks (COFs). Combined with COFs' inherent highly oriented pore structures, the as-made asymmetric membranes through chemical etching can minimize the solvent critical intrusion pressure and enable inner pore low friction water transport. Ultimately, obtained COF membranes succeeded in trapping fog from air and achieved a water harvesting rate (WHR) of 1570 mg cm-2 h-1, together with small molecular pollutants filtrated off in the meantime. Intriguingly, the synthesized asymmetric COF membranes illustrated unidirectional low friction water collecting and transporting features, the successful imitation of T. macdougallii. This work presents a practical strategy to construct functional porous membranes for low friction water collection and transport, and created a model paradigm to design fluid transporting pore channels.

Ordered Interfacial Water Generated at Poly(ionic liquid) Membrane Surface Imparts Ultrafast Water Transport and Superoleophobicity

Achieving ultrahigh permeance and superoleophobicity is crucial for membrane application. Here, we demonstrated that a poly(ionic liquid)/PES hydrogel membrane can achieve dual goals. The high polarity of the ionic liquids induces the water molecules on the membrane surface to be arranged more ordered, as verified by molecular dynamics (MD) simulation and advanced femtosecond sum frequency generation (SFG) vibrational spectroscopy. Meanwhile, a large amount of water exists in membrane pores, demonstrated by water absorption, low-field nuclear magnetic resonance, and SFG spectroscopy. The interfacial water layer endows the membrane with superior anti-oil-fouling properties, and the large amount of water in membrane pores imparts membrane with ultrahigh permeability. The positive charge on the channel surface and moderate channel size confer a high rejection of metal ions. The optimal membrane exhibited a permeance of 35.1 L m-2 h-1 bar-1, 5-10 times that of conventional hydrogel membranes with similar rejection. Moreover, the membrane exhibited excellent antibacterial properties. It can be expected that highly polar poly(ionic liquid) membranes will find promising applications in the water treatment field.

Covalent Folding of Fluorinated Polyphenylene by Sulfur Fluorine Annulative Substitution

We report that fluorinated polyphenylene P50 undergoes folding-like sulfur fluorine annulative substitution (SFAS) to form a well-defined tubular helix H50. This is achieved with atomic precision in an exceptionally efficient manner, involving the simultaneous transformation of 98 C-F bonds with the yield per reaction site approaching 99.9 %. The desired product H50 features a fully fused dibenzothiophene skeleton of 5.8 helical turns in total. It is truly monodisperse (Đ=1.0) in nature, allowing for thorough spectroscopic characterizations. Unambiguous single crystal X-ray structure, distinct chiroptical properties, and intriguing through-cavity threading complexation are described. These results, in addition to those of H50's lower congeners, H34 and H18, illustrate the great potential of folding-like SFAS in shaping random-coiled polymer chains into higher-order functional structures.

Approaching Ideal Selectivity with Bioinspired and Biomimetic Membranes

The applications of polymeric membranes have grown rapidly compared to traditional separation technologies due to their energy efficiency and smaller footprint. However, their potential is not fully realized due, in part, to their heterogeneity, which results in a "permeability-selectivity" trade-off for most membrane applications. Inspired by the intricate architecture and excellent homogeneity of biological membranes, bioinspired and biomimetic membranes (BBMs) aim to emulate biological membranes for practical applications. This Review highlights the potential of BBMs to overcome the limitations of polymeric membranes by utilizing the "division of labor" between well-defined permeable pores and impermeable matrix molecules seen in biological membranes. We explore the exceptional performance of membranes in biological organisms, focusing on their two major components: membrane proteins (biological channels) and lipid matrix molecules. We then discuss how these natural materials can be replaced with artificial mimics for enhanced properties and how macro-scale BBMs are developed. We highlight key demonstrations in the field of BBMs that draw upon the factors responsible for transport through biological membranes. Additionally, current state-of-the-art methods for fabrication of BBMs are reviewed with potential challenges and prospects for future applications. Finally, we provide considerations for future research that could enable BBMs to progress toward scale-up and enhanced applicability.

Transmembrane Ion Channels: From Natural to Artificial Systems

Natural channel proteins allow the selective permeation of ions, water or other nutritious entities across bilayer membranes, facilitating various essential physiological functions in living systems. Inspired by nature, chemists endeavor to simulate the structural features and transport behaviors of channel proteins through biomimetic strategies. In this review, we start from introducing the inherent traits of channel proteins such as their crystal structures, functions and mechanisms. Subsequently, different kind of synthetic ion channels including their design principles, dynamic regulations and therapeutic applications were carefully reviewed. Finally, the potential challenges and opportunities in this research field were also carefully discussed. It is anticipated that this review could provide some inspiring ideas and future directions towards the construction of novel bionic ion channels with higher-level structures, properties, functions and practical applications.

Partitioning / Self-assembly of Artificial Water Channels - Toward Controlled Permselectivity through Bilayer Membrane

Artificial water channels (AWCs) have been extensively explored to mimic natural proteins, which enables to effectively transport water while blocking ions. As one of the first AWCs, self-assembled I-quartets (HCx) have showcased high water-permselectivity that can be enhanced by improving their distribution and stability within membrane. The use of long alkyl chains (n>8) is constrained by their low solubility and aggregation. Herein, we considered cycloalkyl moieties, explored for the increase of the solubility favoring enhanced partition and/ for their self-assembly behaviors resulting the formation of effective stable water-channels with increased water permeability in bilayer membranes. This class of cycloalkyl-ureido-ethyl-imidazole amphiphilic (CxUH) channel could serve as a new reference for the effective design of self-assembled artificial water channels, it may give rise to the applications in desalination or in water treatment.

Spontaneous Lifting and Self-Cleaning of Gas Hydrate Crystals

Crystal fouling, which refers to the accumulation of precipitates on surfaces and the associated damage, is a common problem in many industrial processes. In deepwater oil and gas transportation, hydrate blockage poses as a considerable barrier. Consequently, modifying hydrophobicity of surfaces has become an increasingly focused strategy to mitigate hydrate. However, the design of surfaces that effectively control the hydrate remains challenging. Herein, we report a superior smooth anti-hydrate material based on silanized modification. The low-adhesion silanized silicon wafer (SSW) realizes a win-win strategy of hard formation and easy removal. Through a comprehensive study combining experimental validation with theoretical analysis, the unique characteristics of SSW in the field of anti-hydrate surfaces were deeply discussed. Various hydrate crystals exhibited a completely different hydrate growth mode at the SSW surface, in which hydrate crystals spontaneously elevated and lifted themselves off from the surface. The presence of the fluorine element on the SSW surface allowed self-lifting growth of hydrate crystals after they covered the water droplet. And the loose and porous crystal structure in this self-lifting growth could reduce the contact area between the hydrate crystals and the substrate, allowing the crystals with minimal adhesion force and removal disturbance. Furthermore, the gas enrichment on the SSW surface also reduced the contact with the substrate, thereby decreasing the adhesion and allowing self-cleaning behavior. These results indicate that the silanized surface is a promising candidate for developing anti-hydrate materials for hydrocarbon production and transportation industry.

Highly Alternating Copolymer of [1.1.1]Propellane and Perfluoro Vinyl Ether: Forming a Hydrophobic and Oleophobic Surface with <50% Fluorine Monomer Content

Utilizing the unique properties of fluorine substitution is an effective strategy for constructing highly functional materials. Here, we synthesized a novel copolymer composed of [1.1.1]propellane and perfluoro(propyl vinyl ether) (PPVE), rich in alternating sequences. The spin-coated copolymer film was amorphous, and its surface exhibited an extremely low surface free energy (γ). The γ value was lower than that of polytetrafluoroethylene despite containing only 40 mol % PPVE units. This can be attributed to the cancellation of the C-F dipole moments by the entirely random orientation of the fluorine units.

Fluorine-Doped Carbon Support Enables Superfast Oxygen Reduction Kinetics by Breaking the Scaling Relationship

It is well-established that Pt-based catalysts suffer from the unfavorable linear scaling relationship (LSR) between *OOH and *OH (ΔG(*OOH)=ΔG(*OH)+3.2±0.2 eV) for the oxygen reduction reaction (ORR), resulting in a great challenge to significantly reduced ORR overpotentials. Herein, we propose a universal and feasible strategy of fluorine-doped carbon supports, which optimize interfacial microenvironment of Pt-based catalysts and thus significantly enhance their reactive kinetics. The introduction of C-F bonds not only weakens the *OH binding energy, but also stabilizes the *OOH intermediate, resulting in a break of LSR. Furthermore, fluorine-doped carbon constructs a local super-hydrophobic interface that facilitates the diffusion of H2O and the mass transfer of O2. Electrochemical tests show that the F-doped carbon-supported Pt catalysts exhibit over 2-fold higher mass activities than those without F modification. More importantly, those catalysts also demonstrate excellent stability in both rotating disk electrode (RDE) and membrane electrode assembly (MEA) tests. This study not only validates the feasibility of tuning the electrocatalytic microenvironment to improve mass transport and to break the scaling relationship, but also provides a universal catalyst design paradigm for other gas-involving electrocatalytic reactions.

3D Cryo-Electron Microscopy Reveals the Structure of a 3-Fluorenylmethyloxycarbonyl Zipper Motif Ensuring the Self-Assembly of Tripeptide Nanofibers

Short peptide-based supramolecular hydrogels appeared as highly interesting materials for applications in many fields. The optimization of their properties relies mainly on the design of a suitable hydrogelator through an empirical trial-and-error strategy based on the synthesis of various types of peptides. This approach is in part due to the lack of prior structural knowledge of the molecular architecture of the various families of nanofibers. The 3D structure of the nanofibers determines their ability to interact with entities present in their surrounding environment. Thus, it is important to resolve the internal structural organization of the material. Herein, using Fmoc-FFY tripeptide as a model amphiphilic hydrogelator and cryo-EM reconstruction approach, we succeeded to obtain a 3.8 Å resolution 3D structure of a self-assembled nanofiber with a diameter of approximately 4.1 nm and with apparently "infinite" length. The elucidation of the spatial organization of such nano-objects addresses fundamental questions about the way short amphiphilic N-Fmoc peptides lacking secondary structure can self-assemble and ensure the cohesion of such a lengthy nanostructure. This nanofiber is organized into a triple-stranded helix with an asymmetric unit composed of two Fmoc-FFY peptides per strand. The three identical amphiphilic strands are maintained together by strong lateral interactions coming from a 3-Fmoc zipper motif. This hydrophobic core of the nanofiber is surrounded by 12 phenyl groups from phenylalanine residues, nonplanar with the six Fmoc groups. Polar tyrosine residues at the C-term position constitute the hydrophilic shell and are exposed all around the external part of the assembly. This fiber has a highly hydrophobic central core with an internal diameter of only 2.4 Å. Molecular dynamics simulations highlight van der Waals and hydrogen bonds between peptides placed on top of each other. We demonstrate that the self-assembly of Fmoc-FFY, whether induced by annealing or by the action of a phosphatase on the phosphorylated precursor Fmoc-FFpY, results in two nanostructures with minor differences that we are unable to distinguish.

Aquaporin-1 and Osmosis: From Physiology to Precision in Peritoneal Dialysis

The discovery of the aquaporin family of water channels has provided a molecular counterpart to the movement of water across biological membranes. The distribution of aquaporins in specific cell types, their selectivity and very high capacity for water permeation, and the control of their expression and/or trafficking are key to sustain osmosis in multiple tissues. Here, we review the convergent evidence demonstrating that aquaporin-1 (AQP1) facilitates water transport across endothelial cells in the peritoneal membrane, a key process for peritoneal dialysis-the leading modality of home-based dialysis therapy for patients with kidney failure. Genetic and pharmacologic studies in mouse and cell models indicated that AQP1 plays a critical role in crystalloid osmosis, with clinically relevant effects on water transport and risk of death and technique failure for patients on dialysis. By contrast, AQP1 plays no role in colloid osmosis. These studies substantiate potential strategies to improve free water transport and ultrafiltration in patients treated by peritoneal dialysis.

Angstrom-Scale 2D Channels Designed For Osmotic Energy Harvesting

Confronting the impending exhaustion of traditional energy, it is urgent to devise and deploy sustainable clean energy alternatives. Osmotic energy contained in the salinity gradient of the sea-river interface is an innovative, abundant, clean, and renewable osmotic energy that has garnered considerable attention in recent years. Inspired by the impressively intelligent ion channels in nature, the developed angstrom-scale 2D channels with simple fabrication process, outstanding design flexibility, and substantial charge density exhibit excellent energy conversion performance, opening up a new era for osmotic energy harvesting. However, this attractive research field remains fraught with numerous challenges, particularly due to the complexities associated with the regulation at angstrom scale. In this review, the latest advancements in the design of angstrom-scale 2D channels are primarily outlined for harvesting osmotic energy. Drawing upon the analytical framework of osmotic power generation mechanisms and the insights gleaned from the biomimetic intelligent devices, the design strategies are highlighted for high-performance angstrom channels in terms of structure, functionalization, and application, with a particular emphasis on ion selectivity and ion transport resistance. Finally, current challenges and future prospects are discussed to anticipate the emergence of more anomalous properties and disruptive technologies that can promote large-scale power generation.

Effect of Co-exposure to Additional Substances on the Bioconcentration of Per(poly)fluoroalkyl Substances: A Meta-Analysis Based on Hydroponic Experimental Evidence

A consensus has yet to emerge regarding the bioconcentration responses of per(poly)fluoroalkyl substances under co-exposure with other additional substances in aqueous environments. This study employed a meta-analysis to systematically investigate the aforementioned issues on the basis of 1,085 published datasets of indoor hydroponic simulation experiments. A hierarchical meta-analysis model with an embedded variance covariance matrix was constructed to eliminate the non-independence and shared controls of the data. Overall, the co-exposure resulted in a notable reduction in PFAS bioaccumulation (cumulative effect size, CES =  - 0.4287, p < 0.05) and bioconcentration factor (R2 = 0.9507, k < 1, b < 0) in hydroponics. In particular, the inhibition of PFAS bioconcentration induced by dissolved organic matter (percentage form of the effect size, ESP =  - 48.98%) was more pronounced than that induced by metal ions (ESP =  - 35.54%), particulate matter (ESP =  - 24.70%) and persistent organic pollutants (ESP =  - 18.66%). A lower AS concentration and a lower concentration ratio of ASs to PFASs significantly promote PFAS bioaccumulation (p < 0.05). The bioaccumulation of PFASs with long chains or high fluoride contents tended to be exacerbated in the presence of ASs. Furthermore, the effect on PFAS bioaccumulation was also significantly dependent on the duration of co-exposure (p < 0.05). The findings of this study provide novel insights into the fate and bioconcentration of PFAS in aquatic environments under co-exposure conditions.

Chiral versus Achiral Assemblies in Multi-Stimuli Responsive Supramolecular Polymerization of Tetra-Substituted Azobenzene Dye

Incorporating photoswitchable moieties into the molecular design of supramolecular architectures provides unique opportunities for controlling their morphology and functionality via optical stimuli. Harnessing geometrical and electrical changes in response to multiple external stimuli on the molecular level to modulate properties remains a fundamental challenge. Herein, the reversible formation of the aggregates of l-tyrosine E-azobenzene-tetracarboxamide (E-ABT) is shown to be finely controlled by light, solvent, or chemical additives. The resulting products differ not only in their overall morphology and supramolecular interactions, but also in their intrinsic chirality, that is, depending on the conditions applied, self-assembly yields chiral columns or π-stacked "achiral" oligomers. This report shows the potential of rational monomer design to achieve controlled self-assembly by stimuli of choice and paves the way toward the use of multi-responsive, sterically hindered azo-benzene aggregates in materials chemistry and nanotechnology.

Comparisons between full molecular dynamics simulation and Zhang's multiscale scheme for nanochannel flows

CONTEXT

In a very small surface separation, the fluid flow is actually multiscale consisting of both the molecular scale non-continuum adsorbed layer flow and the intermediate macroscopic continuum fluid flow. Classical simulation of this flow often takes over large computational source and is not affordable owing to using molecular dynamics simulation (MDS) to model the adsorbed layer flow, if the flow field size is on the engineering size scale such as of 0.01-10 mm or even bigger like occurring in micro or macro hydrodynamic bearings. The present paper uses full MDS to validate Zhang's multiscale flow model, which yields the closed-form explicit flow equations respectively for the adsorbed layer flow and the intermediate continuum fluid flow. Here, full MDS was carried out for the pressure-driven flow of methane in the nano slit pore made of silicon respectively with the channel heights 5.79 nm, 11.57 nm, and 17.36 nm. According to the number density distribution, the flow areas were respectively discriminated as the adsorbed layer zone and the intermediate fluid zone. The values of the characteristic parameters for Zhang's multiscale scheme were extracted from full MDS and input to Zhang's multiscale flow equations respectively for calculating the flow velocity profile and the volume flow rates of the adsorbed layers and the intermediate fluid. It was found that for these three channel heights, the flow velocity profiles calculated from Zhang's model approximate those calculated from full MDS, while the total flow rates through the channel calculated from Zhang's model are close to those calculated from full MDS. The accuracy of Zhang's multiscale flow model is improved with the increase of the channel height.

METHOD

The recent modification of the optimized potential for liquid simulation (MOPLS) model was used to calculate the interaction force between two methane molecules. In order to calculate the interaction force between the wall atoms and the methane molecules accurately, our previous non-equilibrium multiscale MDS was used. The interaction forces between the methane molecule and the wall atom were obtained from the coupled potential function by the L-B mixing rule when the fluid molecules arrived at near wall. The methane molecule diameter was obtained from the radial distribution function by using equilibrium MDS under the same initial conditions. The local viscosities across the adsorbed layer were obtained from the local velocity profile by using the Poiseuille flow method. The motion equation of the methane molecule was solved by the leapfrog method. The temperature of the simulation system was checked by Bhadauria's method, i.e., the system temperature was rectified by the velocities in the y- and z-directions. The flow velocity distributions across the channel height and the volume flow rates through the channel were also calculated from Zhang's closed-form explicit flow equations respectively for the adsorbed layer flow and the intermediate fluid flow. The results respectively obtained from full MDS and Zhang's multiscale flow equations were then compared.

Fluoro-Crown Ether Phosphate as Efficient Cell-Permeable Drug Carrier by Disrupting Hydration Layer

Fast and direct permeation of drug molecules is crucial for effective biotherapeutics. Inspired by a recent finding that fluorous compounds disrupt the hydrogen-bonded network of water, we developed fluoro-crown ether phosphate CyclicFP-X. This compound acts as a fast cell-permeating agent, enabling direct delivery of various bioactive cargos (X) into cancer cells without endocytic entrapment. In contrast, its nonfluorinated cyclic analog (CyclicP-X) failed to achieve cellular internalization. Although the acyclic fluorous analog AcyclicFP-X was internalized, this process occurred slowly owing to the involvement of an endocytic trapping pathway. Designed with a high fluorine density, CyclicFP-X exhibits compactness, polarity, and high-water solubility, facilitating lipid vesicle fusion by disrupting their hydration layers. Raman spectroscopy confirmed the generation of dangling -OH bonds upon addition of CyclicFP-OH to water. Furthermore, conjugating CyclicFP-X with fluorouracil (FU, an anticancer drug) via a reductively cleavable disulfide linker (CyclicFP-SS-FU) demonstrated the general utility of fluoro-crown ether phosphate as a potent carrier for biotherapeutics.

Designing Highly Ordered Helical and Nonhelical Porous Crystalline and Disordered Nonhelical Columnar Liquid Crystalline Self-Organizations

Helical self-organizations are equilibrium structures responsible for the assembly of nonequilibrium and equilibrium living and synthetic systems. Racemic helical columnar systems transform into one-handed systems with the help of enantiomerically rich or pure components. Racemic, enantiomerically rich, and enantiomerically pure helical periodic arrays of columns are analyzed by oriented fiber X-ray diffraction (XRD). With few exceptions, highly ordered helical 3-D organizations as generated from homochiral columns cannot be obtained from achiral, racemic, or enantiomerically rich helical columns. Here, we report an unprecedented class of nonhelical porous ordered, disordered nonhelical columnar liquid crystalline (LC) self-organizations and columnar liquids constructed from AB4 to AB9 isomeric terphenyls by molecular design unwinding of a 3-D helical organization. A library of 16 nonhelical porous ordered, disordered columnar and four liquids was designed by employing as a model a closely related achiral AB4 meta-terphenyl, which self-organizes one of the most perfect synthetic ordered columnar hexagonal helices known. A general molecular mechanism to unwind highly ordered 3-D helices into nonhelical porous columnar ordered LCs and liquids was elaborated to design this transformation, which provided unprecedented nonequilibrium synthetic systems. This methodology is expected to be general for transformation of helical macromolecular and supramolecular organizations into nonhelical crystals, LCs, and liquids.

Diurnal humidity cycle driven selective ion transport across clustered polycation membrane

The ability to manipulate the flux of ions across membranes is a key aspect of diverse sectors including water desalination, blood ion monitoring, purification, electrochemical energy conversion and storage. Here we illustrate the potential of using daily changes in environmental humidity as a continuous driving force for generating selective ion flux. Specifically, self-assembled membranes featuring channels composed of polycation clusters are sandwiched between two layers of ionic liquids. One ionic liquid layer is kept isolated from the ambient air, whereas the other is exposed directly to the environment. When in contact with ambient air, the device showcases its capacity to spontaneously produce ion current, with promising power density. This result stems from the moisture content difference of ionic liquid layers across the membrane caused by the ongoing process of moisture absorption/desorption, which instigates selective transmembrane ion flux. Cation flux across the polycation clusters is greatly inhibited because of intensified charge repulsion. However, anions transport across polycation clusters is amplified. Our research underscores the potential of daily cycling humidity as a reliable energy source to trigger ion current and convert it into electrical current.

Precise Helium Sieving from Hydrogen Using Fluorine-Decorated Carbon Hollow Fiber Membranes

Separating helium (He) and hydrogen (H2), two gases that are extremely similar in molecular size and condensation properties, presents a formidable challenge in the helium industry. The development of membranes capable of precisely differentiating between these gases is crucial for achieving large-scale, energy-efficient He/H2 separation. However, the limited selectivity of current membranes has hindered their practical application. In this study, we propose a novel approach to overcome this challenge by engineering submicroporous membranes through the fluorination of partially carbonized hollow fibers. We demonstrate that the fluorine substitution on the inner rim of the micropore walls within the carbon hollow fibers enables tunability of the microporous architecture. Furthermore, it enhances interactions between H2 molecules and the micropore walls through the polarization and hydrogen bonding induced by C-F bonds, resulting in simultaneous improvements in both He/H2 diffusivity and solubility selectivities. The fluorinated HFM-550-F-1 min membrane exhibits exceptional mixed-gas separation performance, with a binary mixed-gas He/H2 selectivity of 10.5 and a ternary mixed-gas He/(H2+CO2) selectivity of 20.8, at 40 bar feed pressure and 35 °C, surpassing all previously reported polymer-based gas separation membranes, and remarkable plasticization resistance and long-term continuous stability over 30 days.

Effect of Droplet-Removal Processes on Fog-Harvesting Performance on Wettability-Controlled Wire Array with Staggered Arrangement

Development of freshwater resources is vital to overcoming severe worldwide water scarcity. Fog harvesting has attracted attention as a candidate technology that can be used to obtain fresh water from a stream of foggy air without energy input. Drainage of captured droplets from fog harvesters is necessary to maintain the permeability of harp-shaped harvesters. In the present study, we investigated the effect of the droplet-removal process on the amount of water harvested using a harvester constructed by wettability-controlled wires with an alternating and staggered arrangement. Droplet transfer from hydrophobic to hydrophilic wires, located upstream and downstream of the fog flow, respectively, was observed with a fog velocity greater than 1.5 m/s. The proportion of harvesting resulting from droplet transfer exceeded 30% of the total, and it reflected more than 20% increase of the harvesting performance compared with that of a harvester with wires of the same wettability: this value varied with the adhesive property of the wires and fog velocity. Scaled-up and multilayered harvesters were developed to enhance harvesting performance. We demonstrated certain enhancements under multilayered conditions and obtained 15.99 g/30 min as the maximum harvested amount, which corresponds to 13.3% of the liquid contained in the fog stream and is enhanced by 10% compared with that without droplet transfer.

Thiourea as a "Polar Hydrophobic" Hydrogen-Bonding Motif: Application to Highly Durable All-Underwater Adhesion

Here, we report that, in contrast to urea, thiourea functions as a "polar hydrophobic" hydrogen-bonding motif. Although thiourea is more acidic than urea, thiourea exchanges its N-H protons with water at a rate that is 160 times slower than that for urea at 70 °C. This suggests that thiourea is much less hydrated than urea in an aqueous environment. What led us to this interesting principle was the serendipitous finding that self-healable poly(ether thiourea) adhered strongly to wet glass surfaces. This discovery enabled us to develop an exceptionally durable all-underwater adhesive that can maintain large adhesive strength for over a year even in seawater, simply by mechanically mixing three water-insoluble liquid components on target surfaces. Because thiourea is hydrophobic, its hydrogen-bonding networks within the adhesive structure and at the adhesive-target interface are presumed to be dehydrated. For comparison, a reference adhesive using urea as a representative "polar hydrophilic" hydrogen-bonding motif was durable for less than 4 days in water. Highly durable all-underwater adhesives are needed in various fields of marine engineering and biomedical sciences, but their development has been a major challenge because a hydration layer that spontaneously forms in water always inhibits adhesion.

Porous Organic Nanotubes: Chemistry of One-Dimensional Space

ConspectusOne-dimensional organic nanotubes feature unique properties, such as confined chemical environments and transport channels, which are highly desirable for many applications. Advances in synthetic methods have enabled the creation of different types of organic nanotubes, including supramolecular, hydrogen-bonded, and carbon nanotube analogues. However, challenges associated with chemical and mechanical stability along with difficulties in controlling aspect ratios remain a significant bottleneck. The fascination with structured porous materials has paved the way for the emergence of reticular solids such as metal-organic frameworks (MOFs), covalent organic frameworks (COFs), and organic cages. Reticular materials with tubular morphology promise architectural stability with the additional benefit of permeant porosity. Despite this, the current synthetic approaches to these reticular nanotubes focus more on structural design resulting in less reliable morphological uniformity. This Account, highlights the design motivation behind various classes of organic nanotubes, emphasizing their porous interior space. We explore the strategic assembly of organic nanotubes based on their bonding characteristics, from weak supramolecular to robust covalent interactions. Special attention is given to reticular nanotubes, which have gained prominence over the past two decades due to their distinctive micro and mesoporous structures. We examine the synergy of covalent and noncovalent interactions in constructing assembly of these nanotube structures.This Account furnishes a comprehensive overview of our efforts and advancements in developing porous covalent organic nanotubes (CONTs). We describe a general synthetic approach for creating robust imine-linked nanotubes based on the reticular chemistry principles. The use of spatially oriented tetratopic triptycene-based amine and linear ditopic aldehyde building blocks facilitates one-dimensional nanotube growth. The interplay between directional covalent bonds and solvophobic interactions is crucial for forming uniform, well-defined, and high aspect ratio nanotubes. The nanotubes derive their permeant porosity and thermal and chemical stability from their covalent architecture. We also highlight the adaptability of our synthetic methodology to guide the transformation of one-dimensional nanotubes to toroidal superstructures and two-dimensional thin fabrics. Such morphological transformation can be directed by tuning the reaction time or incorporating additional intermolecular interactions to control the intertwining behavior of individual nanotubes. The cohesion of covalent and noncovalent interactions in the tubular nanostructures manifests superior viscoelastic mechanical properties in the assembled CONT fabrics. We establish a strong correlation between structural framework design and nanostructures by translating reticular synthesis to morphological space and gaining insights into the assembly processes. We anticipate that the present Account will lay the foundation for exploring new designs and chemistry of organic nanotubes for many application platforms.

Strength, number, and kinetics of hydrogen bonds for water confined inside boron nitride nanotubes

Water has shown a myriad of highly interesting properties and behaviors, such as very low friction, phase transition under unexpected conditions, massive property alterations, etc. inside strong nanoconfinements of few-nanometer to sub-nanometer diameters. Water-water hydrogen bonding is one of the most important factors dictating such water behavior and properties inside such strong nanoconfinements. In this paper, we employ Reactive Force Field (ReaxFF) molecular dynamics (MD) simulations for studying multiple facets of such water-water hydrogen bonds (HBs) inside boron-nitride nanotubes (BNNTs) having diameters ranging from a few nanometers to sub-nanometers. First, the strength of the water-water HB interactions, as a function of the HB configuration, is quantified by studying the corresponding PMF (potential of mean force). For water present in extreme confinements (BNNTs with sub-nanometric diameters), we see completely isolated HB basins. On the other hand, for bulk water the HB basin is connected (via a saddle point) to a nearby second PMF well. Therefore, our analysis successfully distinguishes the HB characteristics between the cases of water in extreme confinement and bulk water. Second, we study the kinetics of such water-water HBs: HBs formed by a given pair of water molecules in extreme confinements show a much larger probability of remaining intact once formed or re-forming after they have been broken. Both these results, which shed new light on water-water hydrogen bonding inside strong nanoconfinements, can be explained by the single-file structure formed by the water molecules in extreme BNNT confinements.

2D Materials Kill Bacteria from Within

Early work demonstrated that some two-dimensional (2D) materials could kill bacteria by using their sharp edges to physically rupture the bacteria envelope, which presents distinct advantages over traditional antibiotics, as bacteria are not able to evolve resistance to the former. This mechano-bactericidal mode of action, however, suffers from low antibacterial efficiency, fundamentally because of random orientation of 2D materials outside the bacteria, where the desirable "edge-to-envelope" contacts occur with low probability. Here, we demonstrate a proof-of-concept approach to significantly enhance the potency of the mechano-bactericidal activity of 2D materials. This approach is in marked contrast with previous work, as the 2D materials are designed to be in situ generated inside the bacteria from a molecularly engineered monomer in a self-assembled manner, profoundly promoting the probability of the "edge-to-envelope" contacts. The rationale in this study sheds light on a mechanically new nanostructure-enabled antibacterial strategy to combat antibiotic resistance.

Fast-Crosslinking Enabled Self-Roughed Polydimethylsiloxane Transparent Superhydrophobic Coating and Its Application in Anti-Liquid-Interference Electrothermal Device

Polydimethylsiloxane (PDMS)-based transparent and superhydrophobic coatings have important applications, such as anti-icing, corrosion resistance, self-cleaning, etc. However, their applications are limited by the inevitable introduction of nanoparticles/high-temperature/segmented PDMS to facilitate a raspy surface. In this study, a self-roughed, neat PDMS superhydrophobic coating with high transparency is developed via a one-step spray-coating technique. PDMS suspensions with various droplet sizes are synthesized and used as building blocks for raspy surface formation by controlled curing on the warm substrate. The optimal coating exhibits a large water contact angle of 155.4° and transparency (T550 = 82.3%). Meanwhile, the employed spray-coating technique is applicable to modify a plethora of substrates. For proof-of-concept demonstrations, the use of the PDMS hydrophobic coating for anti-liquid-interference electrothermal devices and further transparent observation window for long-term operation in a sub-zero environment is shown successful. The proposed facile synthesis method of hydrophobic PDMS coating is expected to have great potential for a broad range of applications in the large-scale fabrication of fluorine-free, eco-friendly superhydrophobic surfaces.

Ion-Concentration-Hopping Heterolayer Gel for Ultrahigh Gradient Energy Conversion

Conventional solid ion channel systems relying on single one- or two-dimensional confined nanochannels enabled selective and ultrafast convective ion transport. However, due to intrinsic solid channel stacking, these systems often face pore-pore polarization and ion concentration blockage, thereby restricting their efficiency in macroscale ion transport. Here, we constructed a soft heterolayer-gel system that integrated an ion-selective hydrogel layer with a water-barrier organogel layer, achieving ultrahigh cation selectivity and flux and effectively providing high-efficiency gradient energy conversion on a macroscale order of magnitude. Specifically, the hydrogel layer featured an unconfined 3D network, where the fluctuations of highly hydrated polyelectrolyte chains driven by thermal dynamics enhanced cation selectivity and mitigated transfer energy barriers. Such chain fluctuation mechanisms facilitated ion-cluster internal transmission, thereby enhancing ion concentration hopping for more efficient ion-selective transport. Compared to the existing rigid nanochannel-based gradient energy conversion systems, such a heterogel-based power generator exhibited a record power density of 192.90 and 1.07 W/m2 at the square micrometer scale and square centimeter scale, respectively (under a 500-fold artificial solution). We anticipate that such heterolayer gels would be a promising candidate for energy separation and storage applications.

Self-assembly of rigid amphiphilic graft cyclic-brush copolymers to nanochannels using dissipative particle dynamics simulation

The synthesis of specific artificial nanochannels remains a formidable challenge in the field of nanomaterials and synthetic chemistry. In particular, the preparation of artificial nanochannels using amphiphilic graft cyclic-brush copolymers (AGCCs) as monomers has garnered substantial attention. Nevertheless, because of the constrained time and length scales inherent in traditional molecular dynamics simulations, a comprehensive theoretical understanding of the morphological regulation mechanism governing the self-assembly of AGCCs into nanochannels remains elusive. In this study, we employed the dissipative particle dynamics (DPD) method to explore the self-assembly mechanism considering factors such as the DPD interaction parameters, concentrations, and sizes of AGCCs. By calculating the phase diagrams, we predicted the emergence of four distinct nanochannel types: short independent, long independent, parallel, and disordered channels. Importantly, the formation of these nanochannels is highly contingent on specific environmental conditions. Furthermore, we extensively discussed self-assembly processes that lead to different types of nanochannels. The self-assembly of AGCCs is revealed as a multistep process primarily influenced by the interaction parameters. However, while the monomer size and concentration do not introduce novel self-assembly morphologies, they do influence the final aggregation state. The elucidation of the self-assembly mechanism presented in this study deepens our understanding of AGCC nanochannel formation. Consequently, this is a valuable guide for the preparation of copolymer materials with specific functionalities, offering insights into targeted copolymer material design.

Metal-Free, Hindered, Regioselective Access to Multifunctional Groups Diarylamines via SN Ar Substitution of P-Nitroso Aromatic Methyl Ether by Arylamines

Multifunctional groups diarylamines, an innovative product, efficiently produced from arylamines and p-nitrosoanisole derivatives by intermolecular SN Ar under weak acid conditions. This SN Ar proceeds under mild reaction conditions, and more significantly, the substrates involved do not necessarily require strong electron-withdrawing groups. Moreover, this SN Ar is characterized by resistance to space crowding, tolerance to halogen and nitroso functional groups, and high regioselectivity. Mechanistic observations suggest that the SN Ar is the result of the transfer of the positive charge center of the protonated nitroso group to the p-methoxy group.

Beyond Natural Channel Proteins: Recent Advances in Fluorinated Nanochannels

Inspired by the structures and functions of natural channel proteins that selectively permeate ions and molecules across biological membranes, synthetic molecules capable of self-assembling into supramolecular nanotubes within the hydrophobic layer of the membranes have been designed and their material permeation properties have been studied. More recently, synthetic chemists have ventured to incorporate fluorine atoms, elements rarely found in natural proteins, into the structure of synthetic channels and discovered anomalous transmembrane material permeation properties. In this Perspective, the author provides a brief overview of recent advances in the development of fluorinated nanochannels and possible directions for the future.

Fluorine-free nanoparticle coatings on cotton fabric: comparing the UV-protective and hydrophobic capabilities of silica vs. silica-ZnO nanostructures

Robust, hydrophobic woven cotton fabrics were obtained through the sol-gel dip coating of two different nanoparticle (NP) architectures; silica and silica-ZnO. Water repellency values as high as 148° and relatively low tilt angles for fibrous fabrics (12°) were observed, without the need for fluorinated components. In all cases, this enhanced functionality was achieved with the broad retention of water vapor permeability characteristics, i.e., less than 10% decrease. NP formation routes indicated direct bonding interactions in both the silica and silica-ZnO structures. The physico-chemical effects of NP-compatibilizer (i.e., polydimethoxysilane (PDMS) and n-octyltriethoxysilane (OTES) at different ratios) coatings on cotton fibres indicate that compatibilizer-NP interactions are predominantly physical. Whenever photoactive ZnO-containing additives were used, there was a minor decrease in hydrophobic character, but order of magnitude increases in UV-protective capability (i.e., UPF > 384); properties which were absent in non-ZnO-containing samples. Such water repellency and UPF capabilities were stable to both laundering and UV-exposure, resisting the commonly encountered UV-induced wettability transitions associated with photoactive ZnO. These results suggest that ZnO-containing silica NP coatings on cotton can confer both excellent and persistent surface hydrophobicity as well as UV-protective capability, with potential uses in wearables and functional textiles applications.

Collective Effects of Multiple Fluorine Atoms Causing π-philic Characteristic within a Caged Polyoxometalate Framework

Perfluorination brings about distinctive properties arising from the unusual nature of the F element, which have been extensively developed in materials science and chemistry. Herein we report that the construction of F-rich inner space within a hollowed Mo132 O372 cage ([Mo132 O372 (OCOR)30 (H2 O)72 ]42- ) leads to the emergence of unique guest binding activities in encapsulation. Prominently, the trifluoroacetate-modified cage (R=CF3 , 2) having as many as 90 F groups inside favors trapping cyclopentadiene (Cp), which is hardly trapped by the non-fluorinated counterpart (R=CH3 , 1). Systematic studies using related hydrocarbons show that the amount of the encapsulated guest is correlated with the unsaturation degree of the guests, implying the involvement of the attractive interaction of the CF3 -modified interior wall with the guest π-electron clouds. Control experiments using the semi-fluorinated analogues (R=CF2 H, CFH2 ) reveal that the perfluorination is a critical factor to facilitate the Cp encapsulation by 2, indicating that collective effects of polar C-F bonds spreading over the interior surface, rather than the polarity of the individual C-F bonds, are responsible. We also provide a successful example of the physical molecular confinement within the cage through the "ship-in-a-bottle" Diels-Alder reaction between trapped diene and dienophile.

Covalent Organic Framework with 3D Ordered Channel and Multi-Functional Groups Endows Zn Anode with Superior Stability

Achieving a highly robust zinc (Zn) metal anode is extremely important for improving the performance of aqueous Zn-ion batteries (AZIBs) for advancing "carbon neutrality" society, which is hampered by the uncontrollable growth of Zn dendrite and severe side reactions including hydrogen evolution reaction, corrosion, and passivation, etc. Herein, an interlayer containing fluorinated zincophilic covalent organic framework with sulfonic acid groups (COF-S-F) is developed on Zn metal (Zn@COF-S-F) as the artificial solid electrolyte interface (SEI). Sulfonic acid group (- SO3H) in COF-S-F can effectively ameliorate the desolvation process of hydrated Zn ions, and the three-dimensional channel with fluoride group (-F) can provide interconnected channels for the favorable transport of Zn ions with ion-confinement effects, endowing Zn@COF-S-F with dendrite-free morphology and suppressed side reactions. Consequently, Zn@COF-S-F symmetric cell can stably cycle for 1,000 h with low average hysteresis voltage (50.5 mV) at the current density of 1.5 mA cm-2. Zn@COF-S-F|MnO2 cell delivers the discharge specific capacity of 206.8 mAh g-1 at the current density of 1.2 A g-1 after 800 cycles with high-capacity retention (87.9%). Enlightening, building artificial SEI on metallic Zn surface with targeted design has been proved as the effective strategy to foster the practical application of high-performance AZIBs.

Solvent-controlled synthesis of hydrophilic and hydrophobic carbon dots

Hydrophilicity and hydrophobicity are of paramount importance in surface chemistry. In this study, a solvent-controlled synthesis of hydrophilic and hydrophobic carbon dots (CDs) was prepared via a solvothermal process using pentafluorobenzyl alcohol as the carbon source in either deionized water or N,N-dimethylformamide (DMF) medium. By simply varying the reaction solvent to control the doping of nitrogen and fluorine elements, the hydrophilicity or hydrophobicity of the CDs could be regulated. Hydrophobic and hydrophilic CDs showed blue and green light under a UV lamp, respectively. Besides, we regulated the volume ratio of water/DMF (1 : 2, 1 : 1 and 2 : 1) in the reaction solvent to prepare amphiphilic CDs and further studied their hydrophilicity and hydrophobicity. Furthermore, the sensitivity of hydrophobic CDs to water was investigated. In water detection, the photoluminescent intensity of the blue peak and green peak showed high linearity within the water content of 4-80% and 10-80%, respectively (limit of detection = 0.08%, v/v, in DMF).

Solvent Dependent Folding of an Amphiphilic Polyaramid

A series of synthetic alternating and amphiphilic aromatic amide polymers were synthesized by a step growth polymerization. Alternating meta- and para-linkages were introduced to force the polymer chain into a helical shape in the highly polar solvent water. The polymers were analyzed by 1H NMR spectroscopy and SEC in polar aprotic solvents such as DMSO and DMF. However, the polymers also showed good solubility in water. 1H NMR spectroscopy, small-angle X-ray scattering, and dynamic light scattering provided clear evidence of polymer folding in water but not DMF. We employed parallel tempering metadynamics in the well-tempered ensemble (PTMetaD-WTE) to simulate the free energy surfaces of an analogous model polymer in DMF and water. The simulations gave a molecular model of an unfolded structure in DMF and a helically folded tubular structure in water.

Ultrafast Proton Conduction in an Aqueous Electrolyte Confined in Adamantane-like Micropores of a Sulfonated, Aromatic Framework

Sulfonated, cross-linked porous polymers are promising frameworks for aqueous high-performance electrolyte-host systems for electrochemical energy storage and conversion. The systems offer high proton conductivities, excellent chemical and mechanical stabilities, and straightforward water management. However, little is known about mass transport mechanisms in such nanostructured hosts. We report on the synthesis and postsynthetic sulfonation of an aromatic framework (SPAF-2) with a 3D-interconnected nanoporosity and varying sulfonation degrees. Water adsorption produces the system SPAF-2H20. It features proton exchange capacities up to 6 mequiv g-1 and exceptional proton conductivities of about 1 S cm-1. Two contributions are essential for the highly efficient transport. First, the nanometer-sized pores link the charge transport to the diffusion of adsorbed water molecules, which is almost as fast as bulk water. Second, continuous exchange between interface-bound and mobile species enhances the conductivities at elevated temperatures. SPAF-2H20 showcases how to tailor nanostructured electrolyte-host systems with liquid-like conductivities.

Visualizing Water Monomers and Chiral OH-(H2O) Complexes Infiltrated in a Macroscopic Hydrophobic Teflon Matrix

Insights into the interaction of fluoroalkyl groups with water are crucial to understanding the polar hydrophobicity of fluorinated compounds, such as Teflon. While an ordered hydrophobic-like 2D water layer has been demonstrated to be present on the surface of macroscopically hydrophobic fluorinated polymers, little is known about how the water infiltrates into the Teflon and what is the molecular structure of the water infiltrated into the Teflon. Using highly sensitive femtosecond sum frequency generation vibrational spectroscopy (SFG-VS), we observe for the first time that monomeric H2O and chiral OH-(H2O) complexes are present in macroscopically hydrophobic Teflon. The species are inhomogeneously distributed inside the Teflon matrix and at the Teflon surface. No water clusters or single-file water "wires" are observed in the matrix. SFG free induction decay (SFG-FID) experiments demonstrate that the OH oscillators of physically absorbed molecular water at the surface dephase on the time scale of <230 fs, whereas the water monomers and hydrated hydroxide ions infiltrated in the Teflon matrix dephase much more slowly (680-830 fs), indicating that the embedded monomeric H2O and OH-(H2O) complexes are decoupled from the outer environment. Our findings can well interpret ultrafast water permeation through fluorous nanochannels and the charging mechanism of Teflon, which may tailor the desired applications of organofluorines.

Tailoring Enantiomeric Chiral Channels in Metal-Peptide Networks: A Novel Foldamer-Based Approach for Host-Guest Interactions

Designing chiral channels in organic frameworks presents an ongoing challenge due to the intricate control of size, shape, and functionality required. A novel approach is presented, which crafts enantiomeric chiral channels in metal-peptide networks (MPNs) by integrating short foldamer ligands with CuI clusters. The MPN structure serves as a 3D blueprint for host-guest chemistry, fostering modular substitution to refine chiral channel properties at the atomic scale. Incorporating hydrogen bond networks augments guest molecule interactions with the channel surface. This approach expedites enantiomer discrimination in racemic mixtures and incites adaptable guest molecules to take on specific axially chiral conformations. Distinct from traditional metal-organic frameworks (MOFs) and conventional reticular architectures, this foldamer-based methodology provides a predictable and customizable host-guest interaction system within a 3D topology. This innovation sets the stage for multifunctional materials that merge host-guest interaction systems with metal-complex properties, opening up potential applications in catalysis, sensing, and drug delivery.

2D Fluorinated Graphene Oxide (FGO)-Polyethyleneimine (PEI) Based 3D Porous Nanoplatform for Effective Removal of Forever Toxic Chemicals, Pharmaceutical Toxins, and Waterborne Pathogens from Environmental Water Samples

Although water is essential for life, as per the United Nations, around 2 billion people in this world lack access to safely managed drinking water services at home. Herein we report the development of a two-dimensional (2D) fluorinated graphene oxide (FGO) and polyethylenimine (PEI) based three-dimensional (3D) porous nanoplatform for the effective removal of polyfluoroalkyl substances (PFAS), pharmaceutical toxins, and waterborne pathogens from contaminated water. Experimental data show that the FGO-PEI based nanoplatform has an estimated adsorption capacity (qm) of ∼219 mg g-1 for perfluorononanoic acid (PFNA) and can be used for 99% removal of several short- and long-chain PFAS. A comparative PFNA capturing study using different types of nanoplatforms indicates that the qm value is in the order FGO-PEI > FGO > GO-PEI, which indicates that fluorophilic, electrostatic, and hydrophobic interactions play important roles for the removal of PFAS. Reported data show that the FGO-PEI based nanoplatform has a capability for 100% removal of moxifloxacin antibiotics with an estimated qm of ∼299 mg g-1. Furthermore, because the pore size of the nanoplatform is much smaller than the size of pathogens, it has a capability for 100% removal of Salmonella and Escherichia coli from water. Moreover, reported data show around 96% removal of PFAS, pharmaceutical toxins, and pathogens simultaneously from spiked river, lake, and tap water samples using the nanoplatform.

Tunable Electrochemical Entropy through Solvent Ordering by a Supramolecular Host

An aqueous electrochemically controlled host-guest encapsulation system demonstrates a large and synthetically tunable redox entropy change. Electrochemical entropy is the basis for thermally regenerative electrochemical cycles (TRECs), which utilize reversible electrochemical processes with large molar entropy changes for thermogalvanic waste-heat harvesting and electrochemical cooling, among other potential applications. A supramolecular host-guest system demonstrates a molar entropy change of 4 times that of the state-of-the-art aqueous TREC electrolyte potassium ferricyanide. Upon encapsulation of a guest, water molecules that structurally resemble amorphous ice are displaced from the host cavity, leveraging a change in the degrees of freedom and ordering of the solvent rather than the solvation of the redox-active species to increase entropy. The synthetic tunability of the host allows rational optimization of the system's ΔS, showing a range of -51 to -101 cal mol-1 K-1 (-2.2 to -4.4 mV K-1) depending on ligand and metal vertex modifications, demonstrating the potential for rational design of high-entropy electrolytes and a new strategy to overcome theoretical limits on ion solvation reorganization entropy.

Enhancement of Circularly Polarized Luminescence from Pulsating Nanotubules

Enhancing the dissymmetry factor (glum ) is a crucial issue in developing circularly polarized luminescence (CPL) materials. Herein, based on supramolecular self-assembly of diethyl l-glutamate-cyanodiarylethene (L-GC) in mixed solution of EtOH-H2 O with different water fraction, enhanced circularly polarized emission from pulsating nanotubules is realized. In the mixture of ethanol and water (30/70, v/v), L-GC self-assembles into roll-up-type dense nanotubes and shows l-CPL. Remarkably, by increasing the water fraction to 80% and 90%, the diameter of the roll-up nanotubes increases and the dissymmetry factor of the nanotubes is significantly enhanced from 6.9 × 10-3  (dense nanotubes) to 3.7 × 10-2 (loose nanotubes) because of the enhanced intermolecular interactions and more ordered supramolecular stacking when increasing the water fraction. An efficient way is provided here to realize the increase of the dissymmetry factor by only changing the composition of solvents.

Supramolecular Polymer Polymorphism: Spontaneous Helix-Helicoid Transition through Dislocation of Hydrogen-Bonded π-Rosettes

Polymorphism, a phenomenon whereby disparate self-assembled products can be formed from identical molecules, has incited interest in the field of supramolecular polymers. Conventionally, the monomers that constitute supramolecular polymers are engineered to facilitate one-dimensional aggregation and, consequently, their polymorphism surfaces primarily when the states of assembly differ significantly. This engenders polymorphs of divergent dimensionalities such as one- and two-dimensional aggregates. Notwithstanding, realizing supramolecular polymer polymorphism, wherein polymorphs maintain one-dimensional aggregation, persists as a daunting challenge. In this work, we expound upon the manifestation of two supramolecular polymer polymorphs formed from a large discotic supramolecular monomer (rosette), which consists of six hydrogen-bonded molecules with an extended π-conjugated core. These polymorphs are generated in mixtures of chloroform and methylcyclohexane, attributable to distinctly different disc stacking arrangements. The face-to-face (minimal displacement) and offset (large displacement) stacking arrangements can be predicated on their distinctive photophysical properties. The face-to-face stacking results in a twisted helix structure. Conversely, the offset stacking induces inherent curvature in the supramolecular fiber, thereby culminating in a hollow helical coil (helicoid). While both polymorphs exhibit bistability in nonpolar solvent compositions, the face-to-face stacking attains stability purely in a kinetic sense within a polar solvent composition and undergoes conversion into offset stacking through a dislocation of stacked rosettes. This occurs without the dissociation and nucleation of monomers, leading to unprecedented helicoidal folding of supramolecular polymers. Our findings augment our understanding of supramolecular polymer polymorphism, but they also highlight a distinctive method for achieving helicoidal folding in supramolecular polymers.