Topological phonon-polariton funneling in midinfrared metasurfaces

Ultrafast evanescent heat transfer across solid interfaces via hyperbolic phonon-polariton modes in hexagonal boron nitride

Thermal transport across solid-solid interfaces is vital for advanced electronic and photonic applications, yet conventional conduction pathways often restrict performance. In polar crystals, hybridized vibrational modes called phonon polaritons offer a promising avenue to overcome the limitations of intrinsic phonon heat conduction. Here our work demonstrates that volume-confined hyperbolic phonon polariton (HPhP) modes can transfer energy across solid-solid interfaces at rates far exceeding phonon-phonon conduction. Using pump-probe thermoreflectance with a mid-infrared, tunable probe pulse with subpicosecond resolution, we remotely and selectively observe HPhP modes in hexagonal boron nitride (hBN) via broadband radiative heating from a gold source. Our measurements ascertain that hot electrons impinging at the interface radiate directly into the HPhPs of hBN in the near field, bypassing the phonon-phonon transport pathway. Such polaritonic coupling enables thermal transport speeds in solids orders of magnitude faster than possible through diffusive phonon processes. We thereby showcase a pronounced thermal transport enhancement across the gold-hBN interface via phonon-polariton coupling, advancing the limits of interfacial heat transfer.

Tailoring Phonon Polaritons with a Single-Layer Photonics-Empowered Polaritonic Crystal

Photonic crystals (PhCs) are artificial periodic structures that can compress and control light at the nanoscale. Recently, the emerging van der Waals (vdW) materials with extreme anisotropy exhibit exotic hyperbolic phonon resonances and ray-like propagation. However, localization and manipulation of these hyperbolic phonon polaritons (PhPs) in polaritonic crystals (PoCs) on a scale deeply below the polariton wavelength have remained elusive so far. Here, we experimentally demonstrate tailored PhP localization in a single layer PoC of patterned α-MoO3. The biaxial PoCs have a rotation degree of freedom between the lattice orientation and the optical axis of α-MoO3. By tailoring the rotation angle, the bandgap exhibits a transition from open to closed at certain wavelengths. Two-dimensional localization of PhPs in these rotated PoCs have been directly revealed in real space by infrared nanoimaging. Our work provides a robust platform to construct polaritonic cavities for ultrastrong light-matter interactions and nanoscale polariton manipulation.

Backscattering-free edge states below all bands in two-dimensional auxetic media

Unidirectional and backscattering-free propagation of sound waves is of fundamental interest in physics and highly sought-after in engineering. Current strategies utilize topologically protected chiral edge modes in bandgaps, or complex mechanisms involving active constituents or nonlinearity. Here we propose passive, linear, one-way edge states based on spin-momentum locking of Rayleigh waves in two-dimensional media in the limit of vanishing bulk to shear modulus ratio, which provides perfect unidirectional and backscattering-free edge propagation that is immune to any edge roughness and has no limitation on its frequency (instead of residing in gaps between bulk bands). We further show that such modes are characterized by a topological winding number that protects the linear momentum of the wave along the edge. These passive and backscattering-free edge waves have the potential to enable phononic devices in the form of lattices or continua that work in previously inaccessible frequency ranges.

Multiple Hyperbolic Dispersion Branches and Broadband Canalization in a Phonon-Polaritonic Heterostructure

Hyperbolic polaritons in anisotropic crystals hold great promise for guiding the flow of light at deep-subwavelength scales. However, conventional hyperbolic dispersion with a single pair of symmetric branches inherently confines polaritons to propagate only within specific spatial directions. Here we demonstrate a multibranch in-plane hyperbolic dispersion in a phonon-polaritonic heterostructure composed of α-phase molybdenum trioxide (α-MoO3) and 4H-silicon carbide (4H-SiC). Leveraging the in-plane hyperbolicity of α-MoO3 and the interlayer coupling with 4H-SiC, the polaritons manifest distinct dispersive responses along the mutually orthogonal crystal directions of α-MoO3, enabling asymmetric multidirectional polariton propagation. Furthermore, the dispersion contours of polaritons along the [100] crystal direction of α-MoO3 evolves into flat bands as the frequency decreases, yielding broadband polariton canalization in the low-frequency region. These findings deepen our understanding of the evolution of polariton dispersions in α-MoO3/4H-SiC heterostructures and highlight the potential of this phonon-polaritonic heterostructure as a versatile platform for nanolight manipulation.

A Topological Parametric Phonon Oscillator

Topological bosonic systems have recently aroused intense interests in exploring exotic phenomena that have no counterparts in electronic systems. The squeezed bosonic interaction in these systems is particularly interesting, because it can modify the vacuum fluctuations of topological states, drive them into instabilities, and lead to topological parametric oscillators. However, these phenomena remain experimentally elusive because of limited nonlinearities in most existing topological bosonic systems. Here, a topological parametric phonon oscillator is experimentally realized based on a nonlinear nano-electromechanical Dirac-vortex cavity with strong squeezed interaction. Specifically, the Dirac-vortex cavity is parametrically driven to provide phase-sensitive amplification for topological phonons, leading to the observation of coherent parametric phonon oscillation above the threshold. Additionally, it is confirmed that the random frequency variation caused by fabrication disorders can be suppressed effectively by increasing the cavity size while the free spectral range reduces at a much slower rate, which benefits the realization of large-area single-mode lasers. These results represent an important advance in experimental investigations of topological physics with large bosonic nonlinearities and parametric gain.

Chiral flat-band optical cavity with atomically thin mirrors

A fundamental requirement for photonic technologies is the ability to control the confinement and propagation of light. Widely used platforms include two-dimensional (2D) optical microcavities in which electromagnetic waves are confined in either metallic or distributed Bragg reflectors. Recently, transition metal dichalcogenides hosting tightly bound excitons with high optical quality have emerged as promising atomically thin mirrors. In this work, we propose and experimentally demonstrate a subwavelength 2D nanocavity using two atomically thin mirrors with degenerate resonances. Angle-resolved measurements show a flat band, which sets this system apart from conventional photonic cavities. We demonstrate how the excitonic nature of the mirrors enables the formation of chiral and tunable optical modes upon the application of an external magnetic field. Moreover, we show the electrical tunability of the confined mode. Our work demonstrates a mechanism for confining light with high-quality excitonic materials, opening perspectives for spin-photon interfaces, and chiral cavity electrodynamics.

Topological valley Hall polariton condensation

A photonic topological insulator features robust directional propagation and immunity to defect perturbations of the edge/surface state. Exciton-polaritons, that is, the hybrid quasiparticles of excitons and photons in semiconductor microcavities, have been proposed as a tunable nonlinear platform for emulating topological phenomena. However, mainly due to excitonic material limitations, experimental observations so far have not been able to enter the nonlinear condensation regime or only show localized condensation in one dimension. Here we show a topological propagating edge state with polariton condensation at room temperature and without any external magnetic field. We overcome material limitations by using excitonic CsPbCl3 halide perovskites with a valley Hall lattice design. The polariton lattice features a large bandgap of 18.8 meV and exhibits strong nonlinear polariton condensation with clear long-range spatial coherence across the critical pumping density. The geometric parameters and material composition of our nonlinear many-body photonic system platform can in principle be tailored to study topological phenomena of other interquasiparticle interactions.

Spectroscopic and Interferometric Sum-Frequency Imaging of Strongly Coupled Phonon Polaritons in SiC Metasurfaces

Phonon polaritons enable waveguiding and localization of infrared light with extreme confinement and low losses. The spatial propagation and spectral resonances of such polaritons are usually probed with complementary techniques such as near-field optical microscopy and far-field reflection spectroscopy. Here, infrared-visible sum-frequency spectro-microscopy is introduced as a tool for spectroscopic imaging of phonon polaritons. The technique simultaneously provides sub-wavelength spatial resolution and highly-resolved spectral resonance information. This is implemented by resonantly exciting polaritons using a tunable infrared laser and wide-field microscopic detection of the upconverted light. The technique is employed to image hybridization and strong coupling of localized and propagating surface phonon polaritons in a metasurface of SiC micropillars. Spectro-microscopy allows to measure the polariton dispersion simultaneously in momentum space by angle-dependent resonance imaging, and in real space by polariton interferometry. Notably, it is possible to directly image how strong coupling affects the spatial localization of polaritons, inaccessible with conventional spectroscopic techniques. The formation of edge states is observed at excitation frequencies where strong coupling prevents polariton propagation into the metasurface. The technique is applicable to the wide range of polaritonic materials with broken inversion symmetry and can be used as a fast and non-perturbative tool to image polariton hybridization and propagation.

Dirac exciton-polariton condensates in photonic crystal gratings

Bound states in the continuum have recently been utilized in photonic crystal gratings to achieve strong coupling and ultralow threshold condensation of exciton-polariton quasiparticles with atypical Dirac-like features in their dispersion relation. Here, we develop the single- and many-body theory of these new effective relativistic polaritonic modes and describe their mean-field condensation dynamics facilitated by the interplay between protection from the radiative continuum and negative-mass optical trapping. Our theory accounts for tunable grating parameters giving full control over the diffractive coupling properties between guided polaritons and the radiative continuum, unexplored for polariton condensates. In particular, we discover stable cyclical condensate solutions mimicking a driven-dissipative analog of the zitterbewegung effect characterized by coherent superposition of ballistic and trapped polariton waves. We clarify important distinctions between the polariton nearfield and farfield explaining recent experiments on the emission characteristics of these long lived nonlinear Dirac polaritons.

Polaritonic states trapped by topological defects

The miniaturization of photonic technologies calls for a deliberate integration of diverse materials to enable novel functionalities in chip-scale devices. Topological photonic systems are a promising platform to couple structured light with solid-state matter excitations and establish robust forms of 1D polaritonic transport. Here, we demonstrate a mechanism to efficiently trap mid-IR structured phonon-polaritons in topological defects of a metasurface integrated with hexagonal boron nitride (hBN). These defects, created by stitching displaced domains of a Kekulé-patterned metasurface, sustain localized polaritonic modes that originate from coupling of electromagnetic fields with hBN lattice vibrations. These 0D higher-order topological modes, comprising phononic and photonic components with chiral polarization, are imaged in real- and Fourier-space. The results reveal a singular radiation leakage profile and selective excitation through spin-polarized edge waves at heterogeneous topological interfaces. This offers impactful opportunities to control light-matter waves in their dimensional hierarchy, paving the way for topological polariton shaping, ultrathin structured light sources, and thermal management at the nanoscale.

Observation of topological frequency combs

On-chip generation of optical frequency combs using nonlinear ring resonators has enabled numerous applications of combs that were otherwise limited to mode-locked lasers. Nevertheless, on-chip frequency combs have relied predominantly on single-ring resonators. In this study, we experimentally demonstrate the generation of a novel class of frequency combs, the topological frequency combs, in a two-dimensional lattice of hundreds of ring resonators that hosts fabrication-robust topological edge states with linear dispersion. By pumping these edge states, we demonstrate the generation of a nested frequency comb that shows oscillation of multiple edge state resonances across ≈40 longitudinal modes and is spatially confined at the lattice edge. Our results provide an opportunity to explore the interplay between topological physics and nonlinear frequency comb generation in a commercially available nanophotonic platform.

Localized thermal emission from topological interfaces

The control of thermal radiation by shaping its spatial and spectral emission characteristics plays a key role in many areas of science and engineering. Conventional approaches to tailoring thermal emission using metamaterials are hampered both by the limited spatial resolution of the required subwavelength material structures and by the materials' strong absorption in the infrared. In this work, we demonstrate an approach based on the concept of topology. By changing a single parameter of a multilayer coating, we were able to control the reflection topology of a surface, with the critical point of zero reflection being topologically protected. The boundaries between subcritical and supercritical spatial domains host topological interface states with near-unity thermal emissivity. These topological concepts enable unconventional manipulation of thermal light for applications in thermal management and thermal camouflage.

Pseudo-spin switches and Aharonov-Bohm effect for topological boundary modes

Topological boundary modes in electronic and classical-wave systems exhibit fascinating properties. In photonics, topological nature of boundary modes can make them robust and endows them with an additional internal structure-pseudo-spins. Here, we introduce heterogeneous boundary modes, which are based on mixing two of the most widely used topological photonics platforms-the pseudo-spin-Hall-like and valley-Hall photonic topological insulators. We predict and confirm experimentally that transformation between the two, realized by altering the lattice geometry, enables a continuum of boundary states carrying both pseudo-spin and valley degrees of freedom (DoFs). When applied adiabatically, this leads to conversion between pseudo-spin and valley polarization. We show that such evolution gives rise to a geometrical phase associated with the synthetic gauge fields, which is confirmed via an Aharonov-Bohm type experiment on a silicon chip. Our results unveil a versatile approach to manipulating properties of topological photonic states and envision topological photonics as a powerful platform for devices based on synthetic DoFs.

Near-Unity Light-Matter Interaction in Mid-Infrared van der Waals Metasurfaces

Accessing mid-infrared radiation is of great importance for a range of applications, including thermal imaging, sensing, and radiative cooling. Here, we study light interaction with hexagonal boron nitride (hBN) nanocavities and reveal strong and tunable resonances across its hyperbolic transition. In addition to conventional phonon-polariton excitations, we demonstrate that the high refractive index of hexagonal boron nitride outside the Reststrahlen band allows enhanced light-matter interactions in deep subwavelength (<λ/15) nanostructures across a broad 7-8 μm range. Emergence and interplay of Fabry-Perot and Mie-like resonances are examined experimentally and theoretically. Near-unity absorption and high quality (Q ≥ 80) resonance interaction in the vicinity of the hBN transverse optical phonon is further observed. Our study provides avenues to design highly efficient and ultracompact structures for controlling mid-infrared radiation and accessing strong light-matter interactions with hBN.

Spin-dependent properties of optical modes guided by adiabatic trapping potentials in photonic Dirac metasurfaces

The Dirac-like dispersion in photonic systems makes it possible to mimic the dispersion of relativistic spin-1/2 particles, which led to the development of the concept of photonic topological insulators. Despite recent demonstrations of various topological photonic phases, the full potential offered by Dirac photonic systems, specifically their ability to emulate the spin degree of freedom-referred to as pseudo-spin-beyond topological boundary modes has remained underexplored. Here we demonstrate that photonic Dirac metasurfaces with smooth one-dimensional trapping gauge potentials serve as effective waveguides with modes carrying pseudo-spin. We show that spatially varying gauge potentials act unevenly on the two pseudo-spins due to their different field distributions, which enables control of guided modes by their spin, a property that is unattainable with conventional optical waveguides. Silicon nanophotonic metasurfaces are used to experimentally confirm the properties of these guided modes and reveal their distinct spin-dependent radiative character; modes of opposite pseudo-spin exhibit disparate radiative lifetimes and couple differently to incident light. The spin-dependent field distributions and radiative lifetimes of their guided modes indicate that photonic Dirac metasurfaces could be used for spin-multiplexing, controlling the characteristics of optical guided modes, and tuning light-matter interactions with photonic pseudo-spins.

Hyperbolic polaritonic crystals with configurable low-symmetry Bloch modes

Photonic crystals (PhCs) are a kind of artificial structures that can mold the flow of light at will. Polaritonic crystals (PoCs) made from polaritonic media offer a promising route to controlling nano-light at the subwavelength scale. Conventional bulk PhCs and recent van der Waals PoCs mainly show highly symmetric excitation of Bloch modes that closely rely on lattice orders. Here, we experimentally demonstrate a type of hyperbolic PoCs with configurable and low-symmetry deep-subwavelength Bloch modes that are robust against lattice rearrangement in certain directions. This is achieved by periodically perforating a natural crystal α-MoO₃ that hosts in-plane hyperbolic phonon polaritons. The mode excitation and symmetry are controlled by the momentum matching between reciprocal lattice vectors and hyperbolic dispersions. We show that the Bloch modes and Bragg resonances of hyperbolic PoCs can be tuned through lattice scales and orientations while exhibiting robust properties immune to lattice rearrangement in the hyperbolic forbidden directions. Our findings provide insights into the physics of hyperbolic PoCs and expand the categories of PhCs, with potential applications in waveguiding, energy transfer, biosensing and quantum nano-optics.

Unique Huygens-Fresnel electromagnetic transportation of chiral Dirac wavelet in topological photonic crystal

Light propagates in various ways depending on environment, including uniform medium, surface/interface and photonic crystals, which appears ubiquitously in daily life and has been exploited for advanced optics technology. We unveiled that a topological photonic crystal exhibits unique electromagnetic (EM) transport properties originating from the Dirac frequency dispersion and multicomponent spinor eigenmodes. Measuring precisely local Poynting vectors in microstrips of honeycomb structure where optics topology emerges upon a band gap opening in the Dirac dispersion and a p-d band inversion induced by a Kekulé-type distortion respecting C_6v symmetry, we showed that a chiral wavelet induces a global EM transportation circulating in the direction counter to the source, which is intimately related to the topological band gap specified by a negative Dirac mass. This brand-new Huygens-Fresnel phenomenon can be considered as the counterpart of negative refraction of EM plane waves associated with upwardly convex dispersions of photonic crystals, and our present finding is expected to open a new window for photonic innovations.

In-plane hyperbolic polariton tuners in terahertz and long-wave infrared regimes

One of the main bottlenecks in the development of terahertz (THz) and long-wave infrared (LWIR) technologies is the limited intrinsic response of traditional materials. Hyperbolic phonon polaritons (HPhPs) of van der Waals semiconductors couple strongly with THz and LWIR radiation. However, the mismatch of photon - polariton momentum makes far-field excitation of HPhPs challenging. Here, we propose an In-Plane Hyperbolic Polariton Tuner that is based on patterning van der Waals semiconductors, here α-MoO3, into ribbon arrays. We demonstrate that such tuners respond directly to far-field excitation and give rise to LWIR and THz resonances with high quality factors up to 300, which are strongly dependent on in-plane hyperbolic polariton of the patterned α-MoO3. We further show that with this tuner, intensity regulation of reflected and transmitted electromagnetic waves, as well as their wavelength and polarization selection can be achieved. Our results can help the development of THz and LWIR miniaturized devices.

Hyperbolic whispering-gallery phonon polaritons in boron nitride nanotubes

Light confinement in nanostructures produces an enhanced light-matter interaction that enables a vast range of applications including single-photon sources, nanolasers and nanosensors. In particular, nanocavity-confined polaritons display a strongly enhanced light-matter interaction in the infrared regime. This interaction could be further boosted if polaritonic modes were moulded to form whispering-gallery modes; but scattering losses within nanocavities have so far prevented their observation. Here, we show that hexagonal BN nanotubes act as an atomically smooth nanocavity that can sustain phonon-polariton whispering-gallery modes, owing to their intrinsic hyperbolic dispersion and low scattering losses. Hyperbolic whispering-gallery phonon polaritons on BN nanotubes of ～4 nm radius (sidewall of six atomic layers) are characterized by an ultrasmall nanocavity mode volume (V_m ≈ 10^-10λ₀³ at an optical wavelength λ₀ ≈ 6.4 μm) and a Purcell factor (Q/V_m) as high as 10¹². We posit that BN nanotubes could become an important material platform for the realization of one-dimensional, ultrastrong light-matter interactions, with exciting implications for compact photonic devices.

Coupled Tamm Phonon and Plasmon Polaritons for Designer Planar Multiresonance Absorbers

Wavelength-selective absorbers (WS-absorbers) are of interest for various applications, including chemical sensing and light sources. Lithography-free fabrication of WS-absorbers can be realized via Tamm plasmon polaritons (TPPs) supported by distributed Bragg reflectors (DBRs) on plasmonic materials. While multifrequency and nearly arbitrary spectra can be realized with TPPs via inverse design algorithms, demanding and thick DBRs are required for high quality-factors (Q-factors) and/or multiband TPP-absorbers, increasing the cost and reducing fabrication error tolerance. Here, high Q-factor multiband absorption with limited DBR layers (3 layers) is experimentally demonstrated by Tamm hybrid polaritons (THPs) formed by coupling TPPs and Tamm phonon polaritons when modal frequencies are overlapped. Compared to the TPP component, the Q-factors of THPs are improved twofold, and the angular broadening is also reduced twofold, facilitating applications where narrow-band and nondispersive WS-absorbers are needed. Moreover, an open-source algorithm is developed to inversely design THP-absorbers consisting of anisotropic media and exemplify that the modal frequencies can be assigned to desirable positions. Furthermore, it is demonstrated that inversely designed THP-absorbers can realize same spectral resonances with fewer DBR layers than a TPP-absorber, thus reducing the fabrication complexity and enabling more cost-effective, lithography-free, wafer-scale WS-absorberss for applications such as free-space communications and gas sensing.

Polaritons in Van der Waals Heterostructures

2D monolayers supporting a wide variety of highly confined plasmons, phonon polaritons, and exciton polaritons can be vertically stacked in van der Waals heterostructures (vdWHs) with controlled constituent layers, stacking sequence, and even twist angles. vdWHs combine advantages of 2D material polaritons, rich optical structure design, and atomic scale integration, which have greatly extended the performance and functions of polaritons, such as wide frequency range, long lifetime, ultrafast all-optical modulation, and photonic crystals for nanoscale light. Here, the state of the art of 2D material polaritons in vdWHs from the perspective of design principles and potential applications is reviewed. Some fundamental properties of polaritons in vdWHs are initially discussed, followed by recent discoveries of plasmons, phonon polaritons, exciton polaritons, and their hybrid modes in vdWHs. The review concludes with a perspective discussion on potential applications of these polaritons such as nanophotonic integrated circuits, which will benefit from the intersection between nanophotonics and materials science.

Photonic Dirac cavities with spatially varying mass term

In recent years, photonics has proven itself as an excellent platform for emulation of relativistic phenomena. Here, we show an example of relativistic-like trapping in photonic system that realizes Dirac-like dispersion with spatially inhomogeneous mass term. The modes trapped by such cavities, their energy levels, and corresponding orbitals are then characterized through optical imaging in real and momentum space. The fabricated cavities host a hierarchy of photonic modes with distinct radiation profiles directly analogous to various atomic orbitals endowed with unique characteristics, such as pseudo-particle-hall symmetry and spin degeneracy, and they carry topological charge which gives rise to radiative profiles with angular momentum. We demonstrate that these modes can be directionally excited by pseudo-spin-polarized boundary states. In addition to the fundamental interest in the structure of these pseudo-relativistic orbitals, the proposed system offers a route for designing new types of nanophotonic devices, spin-full resonators and topological light sources compatible with integrated photonics platforms.

Hexagonal Boron Nitride for Photonic Device Applications: A Review

Hexagonal boron nitride (hBN) has emerged as a key two-dimensional material. Its importance is linked to that of graphene because it provides an ideal substrate for graphene with minimal lattice mismatch and maintains its high carrier mobility. Moreover, hBN has unique properties in the deep ultraviolet (DUV) and infrared (IR) wavelength bands owing to its indirect bandgap structure and hyperbolic phonon polaritons (HPPs). This review examines the physical properties and applications of hBN-based photonic devices that operate in these bands. A brief background on BN is provided, and the theoretical background of the intrinsic nature of the indirect bandgap structure and HPPs is discussed. Subsequently, the development of DUV-based light-emitting diodes and photodetectors based on hBN's bandgap in the DUV wavelength band is reviewed. Thereafter, IR absorbers/emitters, hyperlenses, and surface-enhanced IR absorption microscopy applications using HPPs in the IR wavelength band are examined. Finally, future challenges related to hBN fabrication using chemical vapor deposition and techniques for transferring hBN to a substrate are discussed. Emerging techniques to control HPPs are also examined. This review is intended to assist researchers in both industry and academia in the design and development of unique hBN-based photonic devices operating in the DUV and IR wavelength regions.

Ideal acoustic quantum spin Hall phase in a multi-topology platform

Fermionic time-reversal symmetry ([Formula: see text])-protected quantum spin Hall (QSH) materials feature gapless helical edge states when adjacent to arbitrary trivial cladding materials. However, due to symmetry reduction at the boundary, bosonic counterparts usually exhibit gaps and thus require additional cladding crystals to maintain robustness, limiting their applications. In this study, we demonstrate an ideal acoustic QSH with gapless behaviour by constructing a global T_f on both the bulk and the boundary based on bilayer structures. Consequently, a pair of helical edge states robustly winds several times in the first Brillouin zone when coupled to resonators, promising broadband topological slow waves. We further reveal that this ideal QSH phase behaves as a topological phase transition plane that bridges trivial and higher-order phases. Our versatile multi-topology platform sheds light on compact topological slow-wave and lasing devices.

Planar Optical Cavities Hybridized with Low-Dimensional Light-Emitting Materials

Low-dimensional light-emitting materials have been actively investigated due to their unprecedented optical and optoelectronic properties that are not observed in their bulk forms. However, the emission from low-dimensional light-emitting materials is generally weak and difficult to use in nanophotonic devices without being amplified and engineered by optical cavities. Along with studies on various planar optical cavities over the last decade, the physics of cavity-emitter interactions as well as various integration methods are investigated deeply. These integrations not only enhance the light-matter interaction of the emitters, but also provide opportunities for realizing nanophotonic devices based on the new physics allowed by low-dimensional emitters. In this review, the fundamentals, strengths and weaknesses of various planar optical resonators are first provided. Then, commonly used low-dimensional light-emitting materials such as 0D emitters (quantum dots and upconversion nanoparticles) and 2D emitters (transition-metal dichalcogenide and hexagonal boron nitride) are discussed. The integration of these emitters and cavities and the expect interplay between them are explained in the following chapters. Finally, a comprehensive discussion and outlook of nanoscale cavity-emitter integrated systems is provided.

Brown fat detection by infrared thermography-An invaluable research methodology with noteworthy uncertainties confirmed by a mathematical proof

Brown adipose tissue (BAT) represents a pivotal scientific renaissance worthy as a strategy for obesity and diabetes since its re-discovery in adults over a decade ago. Equally compelling is the adoption of infrared thermography (IRT) in recent times as a precise and viable alternative methodology over the 'gold standard' PET-CT scan, given constraints of the latter's high ionizing radiation doses and costs. Unravelling BAT metabolic physiology in live humans has been challenging until recent rigorous validation of IRT against PET. Nevertheless, IRT remains a nascent technique with pitfalls unbeknownst to many researchers. Factors impacting its accuracy merit an in-depth scientific scrutiny. This article discusses the strengths and pitfalls of IRT as an emergent BAT detection technique and provides a mathematical proof of its limitations that BAT researchers should be cognizant of. Understanding these limitations of IRT can prompt extra efforts to control these uncertainties with greater rigour. In conclusion, this warrants further investigations of improving IRT quality via advanced auto-segmentation, powerful image processing of thermograms and protocol standardization along the lines of BARCIST 1.0 to minimize errors and enhance the confidence of the global BAT research community in IRT as a robust and reliable BAT research tool.

Menezes L, Tittl A, Ren H, Maier SA. Optical Metasurfaces for Energy Conversion

Nanostructured surfaces with designed optical functionalities, such as metasurfaces, allow efficient harvesting of light at the nanoscale, enhancing light-matter interactions for a wide variety of material combinations. Exploiting light-driven matter excitations in these artificial materials opens up a new dimension in the conversion and management of energy at the nanoscale. In this review, we outline the impact, opportunities, applications, and challenges of optical metasurfaces in converting the energy of incoming photons into frequency-shifted photons, phonons, and energetic charge carriers. A myriad of opportunities await for the utilization of the converted energy. Here we cover the most pertinent aspects from a fundamental nanoscopic viewpoint all the way to applications.

Observation of Dirac Hierarchy in Three-Dimensional Acoustic Topological Insulators

Dirac cones (DCs) play a pivotal role in various unique phenomena ranging from massless electrons in graphene to robust surface states in topological insulators (TIs). Recent studies have theoretically revealed a full Dirac hierarchy comprising an eightfold bulk DC, a fourfold surface DC, and a twofold hinge DC, associated with a hierarchy of topological phases including first-order to third-order three-dimensional (3D) topological insulators, using the same 3D base lattice. Here, we report the first experimental observation of the Dirac hierarchy in 3D acoustic TIs. Using acoustic measurements, we unambiguously reveal that lifting of multifold DCs in each hierarchy can induce two-dimensional topological surface states with a fourfold DC in a first-order 3D TI, one-dimensional topological hinge states with a twofold DC in a second-order 3D TI, and zero-dimensional topological corner states in a third-order 3D TI. Our Letter not only expands the fundamental research scope of Dirac physics, but also opens up a new route for multidimensional robust wave manipulation.

Phototunable chip-scale topological photonics: 160 Gbps waveguide and demultiplexer for THz 6G communication

The revolutionary 5G cellular systems represent a breakthrough in the communication network design to provide a single platform for enabling enhanced broadband communications, virtual reality, autonomous driving, and the internet of everything. However, the ongoing massive deployment of 5G networks has unveiled inherent limitations that have stimulated the demand for innovative technologies with a vision toward 6G communications. Terahertz (0.1-10 THz) technology has been identified as a critical enabler for 6G communications with the prospect of massive capacity and connectivity. Nonetheless, existing terahertz on-chip communication devices suffer from crosstalk, scattering losses, limited data speed, and insufficient tunability. Here, we demonstrate a new class of phototunable, on-chip topological terahertz devices consisting of a broadband single-channel 160 Gbit/s communication link and a silicon Valley Photonic Crystal based demultiplexer. The optically controllable demultiplexing of two different carriers modulated signals without crosstalk is enabled by the topological protection and a critically coupled high-quality (Q) cavity. As a proof of concept, we demultiplexed high spectral efficiency 40 Gbit/s signals and demonstrated real-time streaming of uncompressed high-definition (HD) video (1.5 Gbit/s) using the topological photonic chip. Phototunable silicon topological photonics will augment complementary metal oxide semiconductor (CMOS) compatible terahertz technologies, vital for accelerating the development of futuristic 6G and 7G communication era driving the real-time terabits per second wireless connectivity for network sensing, holographic communication, and cognitive internet of everything.

Interfacial topological photonics: broadband silicon waveguides for THz 6G communication and beyond

Topological photonics has expanded our understanding of electromagnetic wave propagation and unraveled new methods of electromagnetic wave shaping. Among the various topological photonic systems, valley photonic crystal (VPC) is a highly versatile platform for constructing interfaces that supports unidirectional edge state to enable the robust topological transport of light. Although silicon VPC waveguides has demonstrated the lossless propagation of terahertz (THz) waves through multiple sharp bends, existing designs are mostly based on the standard zigzag-interface. Here, we explore interfacial topological photonics by designing a composite interface junction for an air-slot-like VPC waveguide with a 60° bend and an unchanging bearded-interface to allow the topologically protected propagation of THz waves over a 20% relative bandwidth. We employ particle swarm optimization to design the geometry of a bearded-interface silicon VPC waveguide to achieve a 42% relative bandgap and a topological edge state spanning a usable 25% relative bandwidth. Our work illustrates the prospects and challenges of interfacial topological photonics in the design of broadband silicon topological waveguides for potential applications across the electromagnetic spectrum, including the on-chip THz sixth-generation (6G) communication.

Unidirectionally excited phonon polaritons in high-symmetry orthorhombic crystals

Advanced control over the excitation of ultraconfined polaritons-hybrid light and matter waves-empowers unique opportunities for many nanophotonic functionalities, e.g., on-chip circuits, quantum information processing, and controlling thermal radiation. Recent work has shown that highly asymmetric polaritons are directly governed by asymmetries in crystal structures. Here, we experimentally demonstrate extremely asymmetric and unidirectional phonon polariton (PhP) excitation via directly patterning high-symmetry orthorhombic van der Waals (vdW) crystal α-MoO₃. This phenomenon results from symmetry breaking of momentum matching in polaritonic diffraction in vdW materials. We show that the propagation of PhPs can be versatile and robustly tailored via structural engineering, while PhPs in low-symmetry (e.g., monoclinic and triclinic) crystals are largely restricted by their naturally occurring permittivities. Our work synergizes grating diffraction phenomena with the extreme anisotropy of high-symmetry vdW materials, enabling unexpected control of infrared polaritons along different pathways and opening opportunities for applications ranging from on-chip photonics to directional heat dissipation.

Three-dimensional photonic topological insulator without spin-orbit coupling

Spin-orbit coupling, a fundamental mechanism underlying topological insulators, has been introduced to construct the latter's photonic analogs, or photonic topological insulators (PTIs). However, the intrinsic lack of electronic spin in photonic systems leads to various imperfections in emulating the behaviors of topological insulators. For example, in the recently demonstrated three-dimensional (3D) PTI, the topological surface states emerge, not on the surface of a single crystal as in a 3D topological insulator, but along an internal domain wall between two PTIs. Here, by fully abolishing spin-orbit coupling, we design and demonstrate a 3D PTI whose topological surface states are self-guided on its surface, without extra confinement by another PTI or any other cladding. The topological phase follows the original Fu's model for the topological crystalline insulator without spin-orbit coupling. Unlike conventional linear Dirac cones, a unique quadratic dispersion of topological surface states is directly observed with microwave measurement. Our work opens routes to the topological manipulation of photons at the outer surface of photonic bandgap materials.

Topological Nanophotonic Wavelength Router Based on Topology Optimization

The topological nanophotonic wavelength router, which can steer light with different wavelength signals into different topological channels, plays a key role in optical information processing. However, no effective method has been found to realize such a topological nanophotonic device. Here, an on-chip topological nanophotonic wavelength router working in an optical telecom band is designed based on a topology optimization algorithm and experimentally demonstrated. Valley photonic crystal is used to provide a topological state in the optical telecom band. The measured topological wavelength router has narrow signal peaks and is easy for integration. This work offers an efficient scheme for the realization of topological devices and lays a foundation for the future application of topological photonics.

Topological phonon-polariton funneling in midinfrared metasurfaces

[Figure: see text].