Succession and convergence of biofilm communities in fixed-film reactors treating aromatic hydrocarbons in groundwater

Bacteriocin-a potential antimicrobial peptide towards disrupting and preventing biofilm formation in the clinical and environmental locales

Biofilm, a consortium of microbial cells, protected by extracellular polymeric matrix, is considered a global challenge due to the inherent antibiotic resistance conferred by its lifestyle. Besides, it poses environmental threats causing huge damage in food industries, fisheries, refineries, water systems, pharmaceutical industries, medical industries, etc. Living in a community of microbial populations is most critical in the clinical field, making it responsible for about 80% of severe and chronic microbial diseases. The necessity to find an alternative approach is the need of the hour to solve these crises. So far, many approaches have been attempted to disrupt the initial stage of biofilm formation, including adherence and maturation. Bacteriocins are a group of antimicrobial peptides, produced by bacteria having the potential to disrupt biofilm either by itself or in combination with other drugs than antibiotic counterparts. A clear understanding on mechanisms of bacterial biofilm formation, progression, and resistance will surely lead to the development of innovative, effective biofilm control strategies in pharmaceutical, health care industries and environmental locales.

Assessment of fungal diversity in soil rhizosphere associated with Rhazya stricta and some desert plants using metagenomics

This study aimed to compare the fungal rhizosphere communities of Rhazya stricta, Enneapogon desvauxii, Citrullus colocynthis, Senna italica, and Zygophyllum simplex, and the gut mycobiota of Poekilocerus bufonius (Orthoptera, Pyrgomorphidae, "Usherhopper"). A total of 164,485 fungal reads were observed from the five plant rhizospheres and Usherhopper gut. The highest reads were in S. italica rhizosphere (29,883 reads). Species richness in the P. bufonius gut was the highest among the six samples. Ascomycota was dominant in all samples, with the highest reads in E. desvauxii (26,734 reads) rhizosphere. Sordariomycetes and Dothideomycetes were the dominant classes detected with the highest abundance in C. colocynthis and E. desvauxii rhizospheres. Aspergillus and Ceratobasidium were the most abundant genera in the R. stricta rhizosphere, Fusarium and Penicillium in the E. desvauxii rhizosphere and P. bufonius gut, Ceratobasidium and Myrothecium in the C. colocynthis rhizosphere, Aspergillus and Fusarium in the S. italica rhizosphere, and Cochliobolus in the Z. simplex rhizosphere. Aspergillus terreus was the most abundant species in the R. stricta and S. italica rhizospheres, Fusarium sp. in E. desvauxii rhizosphere, Ceratobasidium sp. in C. colocynthis rhizosphere, Cochliobolus sp. in Z. simplex rhizosphere, and Penicillium sp. in P. bufonius gut. The phylogenetic results revealed the unclassified species were related closely to Ascomycota and the species in E. desvauxii, S. italica and Z. simplex rhizospheres were closely related, where the species in the P. bufonius gut, were closely related to the species in the R. stricta, and C. colocynthis rhizospheres.

The corrosion process caused by the activity of the anaerobic sporulated bacterium Clostridium celerecrescens on API XL 52 steel

The microbial corrosion of oil and gas pipes is one of the problems occurring in the oil industry. Various mechanisms explaining microbial corrosion have been demonstrated. Commonly, biocorrosion is attributed to sulfate-reducing bacteria. Also, it has recently been reported that microbial species can connect their electron transport system to metal electrodes. In this research, two spore-forming bacteria isolated in different years from a gas pipeline were identified by biochemical techniques and by 16S rDNA amplification, sequencing, and comparison with the NCBI database. Isolates were also compared between them using molecular techniques as the restriction patterns, unique for 16S rDNA (ARDRA), and the profile of the amplified bit from the genomic DNA, using an unspecific primer (RAPD). The results obtained showed that both isolates corresponded to Clostridium celerecrescens with a 99% similarity according to the sequence reported on the NCBI database. Also, the ARDRA and RAPD electrophoretic profiles of both strains were identical, and no plasmids were found in the strains. Thus, it can be settled that this bacterium is persistent in the environment prevailing in gas pipelines. Also, it was demonstrated that the bacterial secretion of organic acids contributes to the pitting and general biocorrosion of API XL 52 steel. The rates of corrosion obtained, approximately after 40 days, were correlated with the presence and metabolic activity of C. celerecrescens on the metallic surfaces.

Age-Related Shifts in Bacterial Diversity in a Reef Coral

This study investigated the relationship between microbial communities in differently sized colonies of the massive coral Coelastrea aspera at Phuket, Thailand where colony size could be used as a proxy for age. Results indicated significant differences between the bacterial diversity (ANOSIM, R = 0.76, p = 0.001) of differently sized colonies from the same intertidal reef habitat. Juvenile and small colonies (<6cm mean diam) harboured a lower bacterial richness than medium (~10cm mean diam) and large colonies (>28 cm mean diam). Bacterial diversity increased in a step-wise pattern from juveniles<small<medium colonies, which was then followed by a slight decrease in the two largest size classes. These changes appear to resemble a successional process which occurs over time, similar to that observed in the ageing human gut. Furthermore, the dominant bacterial ribotypes present in the tissues of medium and large sized colonies of C. aspera, (such as Halomicronema, an Oscillospira and an unidentified cyanobacterium) were also the dominant ribotypes found within the endolithic algal band of the coral skeleton; a result providing some support for the hypothesis that the endolithic algae of corals may directly influence the bacterial community present in coral tissues.

High-throughput metagenomic technologies for complex microbial community analysis: open and closed formats

Understanding the structure, functions, activities and dynamics of microbial communities in natural environments is one of the grand challenges of 21st century science. To address this challenge, over the past decade, numerous technologies have been developed for interrogating microbial communities, of which some are amenable to exploratory work (e.g., high-throughput sequencing and phenotypic screening) and others depend on reference genes or genomes (e.g., phylogenetic and functional gene arrays). Here, we provide a critical review and synthesis of the most commonly applied “open-format” and “closed-format” detection technologies. We discuss their characteristics, advantages, and disadvantages within the context of environmental applications and focus on analysis of complex microbial systems, such as those in soils, in which diversity is high and reference genomes are few. In addition, we discuss crucial issues and considerations associated with applying complementary high-throughput molecular technologies to address important ecological questions.

Replicating the microbial community and water quality performance of full-scale slow sand filters in laboratory-scale filters

Previous laboratory-scale studies to characterise the functional microbial ecology of slow sand filters have suffered from methodological limitations that could compromise their relevance to full-scale systems. Therefore, to ascertain if laboratory-scale slow sand filters (L-SSFs) can replicate the microbial community and water quality production of industrially operated full-scale slow sand filters (I-SSFs), eight cylindrical L-SSFs were constructed and were used to treat water from the same source as the I-SSFs. Half of the L-SSFs sand beds were composed of sterilized sand (sterile) from the industrial filters and the other half with sand taken directly from the same industrial filter (non-sterile). All filters were operated for 10 weeks, with the microbial community and water quality parameters sampled and analysed weekly. To characterize the microbial community phyla-specific qPCR assays and 454 pyrosequencing of the 16S rRNA gene were used in conjunction with an array of statistical techniques. The results demonstrate that it is possible to mimic both the water quality production and the structure of the microbial community of full-scale filters in the laboratory - at all levels of taxonomic classification except OTU - thus allowing comparison of LSSF experiments with full-scale units. Further, it was found that the sand type composing the filter bed (non-sterile or sterile), the water quality produced, the age of the filters and the depth of sand samples were all significant factors in explaining observed differences in the structure of the microbial consortia. This study is the first to the authors' knowledge that demonstrates that scaled-down slow sand filters can accurately reproduce the water quality and microbial consortia of full-scale slow sand filters.

Rapid succession of uncultured marine bacterial and archaeal populations in a denitrifying continuous culture

Marine denitrification constitutes an important part of the global nitrogen cycle and the diversity, abundance and process rates of denitrifying microorganisms have been the focus of many studies. Still, there is little insight in the ecophysiology of marine denitrifying communities. In this study, a heterotrophic denitrifying community from sediments of a marine intertidal flat active in nitrogen cycling was selected in a chemostat and monitored over a period of 50 days. The chemostat enabled the maintenance of constant and well-defined experimental conditions over the time-course of the experiment. Analysis of the microbial community composition by automated ribosomal intergenic spacer analysis (ARISA), Illumina sequencing and catalyzed reporter deposition fluorescence in situ hybridization (CARD-FISH) revealed strong dynamics in community composition over time, while overall denitrification by the enrichment culture was stable. Members of the genera Arcobacter, Pseudomonas, Pseudovibrio, Rhodobacterales and of the phylum Bacteroidetes were identified as the dominant denitrifiers. Among the fermenting organisms co-enriched with the denitrifiers was a novel archaeon affiliated with the recently proposed DPANN-superphylum. The pan-genome of populations affiliated to Pseudovibrio encoded a NirK as well as a NirS nitrite reductase, indicating the rare co-occurrence of both evolutionary unrelated nitrite reductases within coexisting subpopulations.

Microbial ecology, bacterial pathogens, and antibiotic resistant genes in swine manure wastewater as influenced by three swine management systems

The environmental influence of farm management in concentrated animal feeding operations (CAFO) can yield vast changes to the microbial biota and ecological structure of both the pig and waste manure lagoon wastewater. While some of these changes may not be negative, it is possible that CAFOs can enrich antibiotic resistant bacteria or pathogens based on farm type, thereby influencing the impact imparted by the land application of its respective wastewater. The purpose of this study was to measure the microbial constituents of swine-sow, -nursery, and -finisher farm manure lagoon wastewater and determine the changes induced by farm management. A total of 37 farms were visited in the Mid-South USA and analyzed for the genes 16S rRNA, spaQ (Salmonella spp.), Camp-16S (Campylobacter spp.), tetA, tetB, ermF, ermA, mecA, and intI using quantitative PCR. Additionally, 16S rRNA sequence libraries were created. Overall, it appeared that finisher farms were significantly different from nursery and sow farms in nearly all genes measured and in 16S rRNA clone libraries. Nearly all antibiotic resistance genes were detected in all farms. Interestingly, the mecA resistance gene (e.g. methicillin resistant Staphylococcus aureus) was below detection limits on most farms, and decreased as the pigs aged. Finisher farms generally had fewer antibiotic resistance genes, which corroborated previous phenotypic data; additionally, finisher farms produced a less diverse 16S rRNA sequence library. Comparisons of Camp-16S and spaQ GU (genomic unit) values to previous culture data demonstrated ratios from 10 to 10,000:1 depending on farm type, indicating viable but not cultivatable bacteria were dominant. The current study indicated that swine farm management schemes positively and negatively affect microbial and antibiotic resistant populations in CAFO wastewater which has future "downstream" implications from both an environmental and public health perspective.

Successful treatment of an MTBE-impacted aquifer using a bioreactor self-colonized by native aquifer bacteria

A field-scale fixed bed bioreactor was used to successfully treat an MTBE-contaminated aquifer in North Hollywood, CA without requiring inoculation with introduced bacteria. Native bacteria from the MTBE-impacted aquifer rapidly colonized the bioreactor, entering the bioreactor in the contaminated groundwater pumped from the site, and biodegraded MTBE with greater than 99 % removal efficiency. DNA sequencing of the 16S rRNA gene identified MTBE-degrading bacteria Methylibium petroleiphilum in the bioreactor. Quantitative PCR showed M. petroleiphilum enriched by three orders of magnitude in the bioreactor above densities pre-existing in the groundwater. Because treatment was carried out by indigenous rather than introduced organisms, regulatory approval was obtained for implementation of a full-scale bioreactor to continue treatment of the aquifer. In addition, after confirmation of MTBE removal in the bioreactor to below maximum contaminant limit levels (MCL; MTBE = 5 μg L(-1)), treated water was approved for reinjection back into the aquifer rather than requiring discharge to a water treatment system. This is the first treatment system in California to be approved for reinjection of biologically treated effluent into a drinking water aquifer. This study demonstrated the potential for using native microbial communities already present in the aquifer as an inoculum for ex-situ bioreactors, circumventing the need to establish non-native, non-acclimated and potentially costly inoculants. Understanding and harnessing the metabolic potential of native organisms circumvents some of the issues associated with introducing non-native organisms into drinking water aquifers, and can provide a low-cost and efficient remediation technology that can streamline future bioremediation approval processes.

Relationship between enterococcal levels and sediment biofilms at recreational beaches in South Florida

Enterococci, recommended at the U.S. federal level for monitoring water quality at marine recreational beaches, have been found to reside and grow within beach sands. However, the environmental and ecological factors affecting enterococcal persistence remain poorly understood, making it difficult to determine levels of fecal pollution and assess human health risks. Here we document the presence of enterococci associated with beach sediment biofilms at eight south Florida recreational beaches. Enterococcal levels were highest in supratidal sands, where they displayed a nonlinear, unimodal relationship with extracellular polymeric secretions (EPS), the primary component of biofilms. Enterococcal levels peaked at intermediate levels of EPS, suggesting that biofilms may promote the survival of enterococci but also inhibit enterococci as the biofilm develops within beach sands. Analysis of bacterial community profiles determined by terminal restriction fragment length polymorphisms showed the bacterial communities of supratidal sediments to be significantly different from intertidal and subtidal communities; however, no differences were observed in bacterial community compositions associated with different EPS concentrations. Our results suggest that supratidal sands are a microbiologically unique environment favorable for the incorporation and persistence of enterococci within beach sediment biofilms.

Bacterial dynamics in steady-state biofilters: beyond functional stability

The spatial and temporal dynamics of microbial community structure and function were surveyed in duplicated woodchip-biofilters operated under constant conditions for 231 days. The contaminated gaseous stream for treatment was representative of composting emissions, included ammonia, dimethyl disulfide and a mixture of five oxygenated volatile organic compounds. The community structure and diversity were investigated by denaturing gradient gel electrophoresis on 16S rRNA gene fragments. During the first 42 days, microbial acclimatization revealed the influence of operating conditions and contaminant loading on the biofiltration community structure and diversity, as well as the limited impact of inoculum compared to the greater persistence of the endogenous woodchip community. During long-term operation, a high and stable removal efficiency was maintained despite a highly dynamic microbial community, suggesting the probable functional redundancy of the community. Most of the contaminant removal occurred in the first compartment, near the gas inlet, where the microbial diversity was the highest. The stratification of the microbial structures along the filter bed was statistically correlated to the longitudinal distribution of environmental conditions (selective pressure imposed by contaminant concentrations) and function (contaminant elimination capacity), highlighting the central role of the bacterial community. The reproducibility of microbial succession in replicates suggests that the community changes were presumably driven by a deterministic process.

Analysis of the microbial community structure in a membrane bioreactor during initial stages of filtration

Membrane biofouling was investigated during the early stages of filtration in a laboratory-scale membrane bioreactor operated on molasses wastewater. The bacterial diversity and composition of the membrane biofilm and activated sludge were analyzed using terminal restriction fragment length polymorphism coupled with 16S rRNA clone library construction and sequencing. The amount of extracellular polymeric substances produced by bacteria was investigated using spectroscopic methods. The results reveal that the bacterial community of activated sludge differs significantly from that of the membrane biofilm, especially at the initial phase. Phylogenetic analysis based on 16S rRNA gene sequences identified 25 pioneer OTUs responsible for membrane surface colonization. Also, the relationship between the identified bacterial strains and the system specifications was explored.

Development of bacterial biofilms on artificial corals in comparison to surface-associated microbes of hard corals

Numerous studies have demonstrated the differences in bacterial communities associated with corals versus those in their surrounding environment. However, these environmental samples often represent vastly different microbial micro-environments with few studies having looked at the settlement and growth of bacteria on surfaces similar to corals. As a result, it is difficult to determine which bacteria are associated specifically with coral tissue surfaces. In this study, early stages of passive settlement from the water column to artificial coral surfaces (formation of a biofilm) were assessed. Changes in bacterial diversity (16S rRNA gene), were studied on artificially created resin nubbins that were modelled from the skeleton of the reef building coral Acropora muricata. These models were dip-coated in sterile agar, mounted in situ on the reef and followed over time to monitor bacterial community succession. The bacterial community forming the biofilms remained significantly different (R = 0.864 p<0.05) from that of the water column and from the surface mucus layer (SML) of the coral at all times from 30 min to 96 h. The water column was dominated by members of the α-proteobacteria, the developed community on the biofilms dominated by γ-proteobacteria, whereas that within the SML was composed of a more diverse array of groups. Bacterial communities present within the SML do not appear to arise from passive settlement from the water column, but instead appear to have become established through a selection process. This selection process was shown to be dependent on some aspects of the physico-chemical structure of the settlement surface, since agar-coated slides showed distinct communities to coral-shaped surfaces. However, no significant differences were found between different surface coatings, including plain agar and agar enhanced with coral mucus exudates. Therefore future work should consider physico-chemical surface properties as factors governing change in microbial diversity.

Integrating microbial ecology in bioprocess understanding: the case of gas biofiltration

Biofilters are packed-bed bioreactors where contaminants, once transferred from the gas phase to the biofilm, are oxidized by diverse and complex communities of attached microorganisms. Over the last decade, more and more studies aimed at opening the back box of biofiltration by unraveling the biodiversity-ecosystem function relationship. In this review, we report the insights provided by the microbial ecology approach in biofilters and we emphasize the parallels existing with other engineered ecosystems used for wastewater treatment, as they all constitute relevant model ecosystems to explore ecological issues. We considered three characteristic ecological indicators: the density, the diversity, and the structure of the microbial community. Special attention was paid to the temporal and spatial dynamics of each indicator, insofar as it can disclose the potential relationship, or absence of relation, with any operating or functional parameter. We also focused on the impact of disturbance regime on the microbial community structure, in terms of resistance, resilience, and memory. This literature review led to mitigated conclusions in terms of biodiversity-ecosystem function relationship. Depending on the environmental system itself and the way it is investigated, the spatial and temporal dynamics of the microbial community can be either correlated (e.g., spatial stratification) or uncoupled (e.g., temporal instability) to the ecosystem function. This lack of generality shows the limits of current 16S approach in complex ecosystems, where a functional approach may be more suitable.

Molecular and functional assessment of bacterial community convergence in metal-amended soils

Species diversity and the structure of microbial communities in soils are thought to be a function of the cumulative selective pressures within the local environment. Shifts in microbial community structure, as a result of metal stress, may have lasting negative effects on soil ecosystem dynamics if critical microbial community functions are compromised. Three soils in the vicinity of a copper smelter, previously contaminated with background, low and high levels of aerially deposited metals, were amended with metal-salts to determine the potential for metal contamination to shape the structural and functional diversity of microbial communities in soils. We hypothesized that the microbial communities native to the three soils would initially be unique to each site, but would converge on a microbial community with similar structure and function, as a result of metal stress. Initially, the three different sites supported microbial communities with unique structural and functional diversity, and the nonimpacted site supported inherently higher levels of microbial activity and biomass, relative to the metal-contaminated sites. Amendment of the soils with metal-salts resulted in a decrease in microbial activity and biomass, as well as shifts in microbial community structure and function at each site. Soil microbial communities from each site were also observed to be sensitive to changes in soil pH as a result of metal-salt amendment; however, the magnitude of these pH-associated effects varied between soils. Microbial communities from each site did not converge on a structurally or functionally similar community following metal-salt amendment, indicating that other factors may be equally important in shaping microbial communities in soils. Among these factors, soil physiochemical parameters like organic matter and soil pH, which can both influence the bioavailability and toxicity of metals in soils, may be critical.

Removal of dichloromethane from waste gases in one- and two-liquid-phase stirred tank bioreactors and biotrickling filters

The removal of dichloromethane (DCM) from polluted air was studied both in biotrickling filters and in continuous stirred tank bioreactors, using either a single-liquid aqueous phase or a combination of an aqueous-organic liquid phase. The presence of the organic phase, i.e. silicone oil, at a volume ratio of 10% of the liquid phase, increased the maximum EC by about 25% in the BTF, reaching 200 gm(3)/h, and by as much as 300% in the CSTB, reaching 350 gm(3)/h. Based on data of chloride release in the aqueous phase and carbon dioxide production in the gas phase, complete dechlorination and mineralization of the pollutant could be confirmed. When applying shock loads, a more stable behaviour was observed in the presence of the organic phase. Generally, the completely mixed reactors were also more stable than the plug-flow biotrickling filters, irrespective of the presence of the organic phase. The use of molecular techniques allowed showing that the originally inoculated DCM-degrading Hyphomicrobium strains remained present, although not dominant, after long-term bioreactor operation. Different new bacterial populations did also appear in the systems, some of which were unable to degrade DCM.

Comparison of microbial community composition and activity in sulfate-reducing batch systems remediating mine drainage

Five microbial inocula were evaluated in batch tests for the ability to remediate mine drainage (MD). Dairy manure (DM), anaerobic digester sludge, substrate from the Luttrell (LUTR) and Peerless Jenny King (PJK) sulfate-reducing permeable reactive zones (SR-PRZs) and material from an MD-treatment column that had been inoculated with material from a previous MD-treatment column were compared in terms of sulfate and metal removal and pH neutralization. The microbial communities were characterized at 0, 2, 4, 9, and 14 weeks using denaturing gradient gel electrophoresis and quantitative polymerase chain reaction to quantify all bacteria and the sulfate-reducing bacteria of the genus Desulfovibrio. The cultures inoculated with the LUTR, PJK, and DM materials demonstrated significantly higher rates of sulfate and metal removal, and contained all the microorganisms associated with the desired functions of SR-PRZs (i.e., polysaccharide degradation, fermentation, and sulfate reduction) as well as a relatively high proportion of Desulfovibrio spp. These results demonstrate that inoculum influences performance and also provide insights into key aspects of inoculum composition that impact performance. This is the first systematic biomolecular examination of the relationship between microbial community composition and MD remediation capabilities.

Impact of non-ionic surfactant on the long-term development of lab-scale-activated sludge bacterial communities

The development of bacterial communities in replicate lab-scale-activated sludge reactors degrading a non-ionic surfactant was evaluated by statistical analysis of denaturing gradient gel electrophoresis (DGGE) fingerprints. Four sequential batch reactors were fed with synthetic sewage, two of which received, in addition, 0.01% of nonylphenol ethoxylates (NPE). The dynamic character of bacterial community structure was confirmed by the differences in species composition among replicate reactors. Measurement of similarities between reactors was obtained by pairwise similarity analysis using the Bray Curtis coefficient. The group of NPE-amended reactors exhibited the highest similarity values (Sjk=0.53+/-0.03), indicating that the bacterial community structure of NPE-amended reactors was better replicated than control reactors (Sjk=0.36+/-0.04). Replicate NPE-amended reactors taken at different times of operation clustered together, whereas analogous relations within the control reactor cluster were not observed. The DGGE pattern of isolates grown in conditioned media prepared with media taken at the end of the aeration cycle grouped separately from other conditioned and synthetic media regardless of the carbon source amendment, suggesting that NPE degradation residuals could have a role in the shaping of the community structure.

Ralstonia pickettiiin environmental biotechnology: potential and applications

Xenobiotic pollutants such as toluene and trichloroethylene are released into the environment by various industrial processes. Ralstonia pickettii possess significant biotechnological potential in the field of bioremediation and has demonstrated the ability to breakdown many of these toxic substances. Here, we provide a description of the major compounds that various strains of R. pickettii are capable of degrading and a brief review of their breakdown pathways and an argument for its use in bioremediation.

Biophysical controls on community succession in stream biofilms

Biofilm formation is controlled by an array of coupled physical, chemical, and biotic processes. Despite the ecological relevance of microbial biofilms, their community formation and succession remain poorly understood. We investigated the effect of flow velocity, as the major physical force in stream ecosystems, on biofilm community succession (as continuous shifts in community composition) in microcosms under laminar, intermediate, and turbulent flow. Flow clearly shaped the development of biofilm architecture and community composition, as revealed by microscopic investigation, denaturing gradient gel electrophoresis (DGGE) analysis, and sequencing. While biofilm growth patterns were undirected under laminar flow, they were clearly directed into ridges and conspicuous streamers under turbulent flow. A total of 51 biofilm DGGE bands were detected; the average number ranged from 13 to 16. Successional trajectories diverged from an initial community that was common in all flow treatments and increasingly converged as biofilms matured. We suggest that this developmental pattern was primarily driven by algae, which, as "ecosystem engineers," modulate their microenvironment to create similar architectures and flow conditions in all treatments and thereby reduce the physical effect of flow on biofilms. Our results thus suggest a shift from a predominantly physical control to coupled biophysical controls on bacterial community succession in stream biofilms.

Bioremediation and monitoring of aromatic-polluted habitats

Bioremediation may restore contaminated soils through the broad biodegradative capabilities evolved by microorganisms towards undesirable organic compounds. Understanding bioremediation and its effectiveness is rapidly advancing, bringing available molecular approaches for examining the presence and expression of the key genes involved in microbial processes. These methods are continuously improving and require further development and validation of primer- and probe-based analyses and expansion of databases for alternative microbial markers. Phylogenetic marker approaches provide tools to determine which organisms are present or generally active in a community; functional gene markers provide only information concerning the distribution or transcript levels (deoxyribonucleic acid [DNA]- or messenger ribonucleic acid [mRNA]-based approaches) of specific gene populations across environmental gradients. Stable isotope probing methods offer great potential to identify microorganisms that metabolize and assimilate specific substrates in environmental samples, incorporating usually a rare isotope (i.e., (13)C) into their DNA and RNA. DNA and RNA in situ characterization allows the determination of the species actually involved in the processes being measured. DNA microarrays may analyze the expression of thousands of genes in a soil simultaneously. A global analysis of which genes are being expressed under various conditions in contaminated soils will reveal the metabolic status of microorganisms and indicate environmental modifications accelerating bioremediation.

Spatial distribution and physiological state of bacteria in a sand column experiment during the biodegradation of toluene

Toxic organic contaminants frequently serve as growth substrates for bacteria. However, long-term exposure to the organic contaminants can result in significant stress or "injury" to bacterial cells such that bacteria may lose, either temporarily or permanently, their capacity to degrade a specific toxic organic contaminant. In order to understand the relationship between biodegradability and physiological conditions of bacteria after a prolonged exposure to a contaminant, biomass samples collected from a sand column experiment, with toluene as the carbon source, were analyzed for bacterial physiology and spatial population distribution in the porous media. The column was seeded with three bacterial isolates that perform aerobic (Pseudomonas putida F1), denitrifying (Thauera aromatica T1), and facultative (Ralstonia pickettii PKO1) degradation of toluene were analyzed. Total, viable but not culturable with toluene, and toluene-culturable cells were enumerated using 4'6-diamidino-2-phenylindole (DAPI) staining and plate counting methods. Comparison of three types of cell counts showed that toluene-culturable cells were less than 40% of the total cell numbers. However, viable colonies transferred to a toluene media after cultivation on rich media regained their ability to degrade toluene. This implies that the temporary loss of their toluene degradation capacity is either due to an intracellular accumulation of degradation by-products, which have to be consumed in order for the cells to degrade toluene, or it is possible that cells have shifted to degrade other substrates such as toluene degradation intermediates or organic materials resulting from cell turnover. Comparison of cell counts with toluene concentration showed no exponential increase in total and viable cell numbers, as reported for flat bed biofilm reactor experiments. The overall fraction of toluene-culturable cells was highest at the highest toluene concentration near the column inlet, which indicates that the observed temporary loss of toluene culturability was not solely caused by a direct toxic effect from the long-term exposure to toluene.

On the reproducibility of microcosm experiments - different community composition in parallel phototrophic biofilm microcosms

Phototrophic biofilms were cultivated simultaneously using the same inoculum in three identical flow-lane microcosms located in different laboratories. The growth rates of the biofilms were similar in the different microcosms, but denaturing gradient gel electrophoresis (DGGE) analysis of both 16S and 18S rRNA gene fragments showed that the communities developed differently in terms of species richness and community composition. One microcosm was dominated by Microcoleus and Phormidium species, the second microcosm was dominated by Synechocystis and Phormidium species, and the third microcosm was dominated by Microcoleus- and Planktothrix- affiliated species. No clear effect of light intensity on the cyanobacterial community composition was observed. In addition, DGGE profiles obtained from the cultivated biofilms showed a low resemblance with the profiles derived from the inoculum. These findings demonstrate that validation of reproducibility is essential for the use of microcosm systems in microbial ecology studies.

Effect of dilution rate on the microbial structure of a mesophilic butyrate-degrading methanogenic community during continuous cultivation

We constructed two mesophilic anaerobic chemostats that were continuously fed with synthetic wastewater containing butyrate as the sole source of carbon and energy. Steady-state conditions were achieved at dilution rates between 0.025 and 0.7 day(-1). Butyrate, fed into the chemostat, was almost completely mineralized to CH(4) and CO(2) at dilution rates below 0.5 day(-1). The butyrate-degrading methanogenic communities in the chemostats at dilution rates between 0.025 and 0.7 day(-1) were monitored based on the 16S rRNA gene, using molecular biological techniques including clone library analysis, denaturing gradient gel electrophoresis, and quantitative real-time polymerase chain reaction. The aceticlastic methanogen Methanosaeta and the hydrogenotrophic methanogen Methanoculleus dominated in methanogens at low dilution rates, whereas the aceticlastic methanogen Methanosaeta, Methanosarcina, the hydrogenotrophic methanogen Methanoculleus, and Methanospirillum dominated at high dilution rates. Bacteria affiliated with the family Syntrophaceae in the phylum Proteobacteria predominated at the low dilution rate of 0.025 day(-1), whereas bacteria affiliated with the phylum Firmicutes and Candidate division OP3 predominated at high dilution rates. A significant quantity of bacteria closely related to the genus Syntrophomonas was detected at high dilution rates. Dilution rate showed an apparent effect on archaeal and bacterial communities in the butyrate-fed chemostats.

Degradation of toluene by a mixed population of archetypal aerobes, microaerophiles, and denitrifiers: Laboratory sand column experiment and multispecies biofilm model formulation

An experiment was conducted in a saturated sand column with three bacterial strains that have different growth characteristics on toluene, Pseudomonas putida F1 which degrades toluene only under aerobic conditions, Thauera aromatica T1 which degrades toluene only under denitrifying conditions, and Ralstonia pickettii PKO1 has a facultative nature and can perform nitrate-enhanced biodegradation of toluene under hypoxic conditions (DO <2 mg/L). Steady-state concentration profiles showed that oxygen and nitrate appeared to be utilized simultaneously, regardless of the dissolved oxygen concentration and the results from fluorescent in-situ hybridization (FISH) indicated that PKO1 maintained stable cells numbers throughout the column, even when the pore water oxygen concentration was high. Since PKO1's growth rate under aerobic condition is much lower than that of F1, except under hypoxic conditions, these observations were not anticipated. Therefore these observations require a mechanistic explanation that can account for localized low oxygen concentrations under aerobic conditions. To simulate the observed dynamics, a multispecies biofilm model was implemented. This model formulation assumes the formation of a thin biofilm that is composed of the three bacterial strains. The individual strains grow in response to the substrate and electron acceptor flux from bulk fluid into the biofilm. The model was implemented such that internal changes in bacterial composition and substrate concentration can be simulated over time and space. The model simulations from oxic to denitrifying conditions compared well to the experimental profiles of the chemical species and the bacterial strains, indicating the importance of accounting for the biological activity of individual strains in biofilms that span different redox conditions.

Evidence of species succession during chlorobenzene biodegradation

We have previously reported the disappearance of a specific strain degrading chlorobenzene from a functionally stable bioreactor. In the present work, we investigated this species succession and isolated a new dominant strain, identified as Pandoraea pnomenusa sp. strain MCB032. A specific 16S rRNA-targeted oligonucleotide probe was designed and validated to identify strain MCB032 using fluorescence in situ hybridisation (FISH). The results confirmed the presence of strain MCB032 in samples collected over time, and showed that it was primarily located within the biofilm. Denaturing gradient gel electrophoresis (DGGE) provided evidence that the species succession occurred early in the operating period. The application of these biomolecular tools highlighted the remarkable stability of this new strain during the 15 months of reactor operation. The succession was attributed to the competitive kinetic behaviour of strain MCB032, which exhibited faster growth (micro(max) = 0.34 h(-1)) and higher substrate affinity (K(s) = 0.35 mg L(-1)) than strain JS150. Finally, this study contributed to the characterisation of the recently established Pandoraea genus, an emerging group in the biodegradation field.

Microbial diversity and bioremediation of a hydrocarbon-contaminated aquifer (Vega Baja, Puerto Rico)

Hydrocarbon contamination of groundwater resources has become a major environmental and human health concern in many parts of the world. Our objectives were to employ both culture and culture-independent techniques to characterize the dynamics of microbial community structure within a fluidized bed reactor used to bioremediate a diesel-contaminated groundwater in a tropical environment. Under normal operating conditions, 97 to 99% of total hydrocarbons were removed with only 14 min hydraulic retention time. Over 25 different cultures were isolated from the treatment unit (96% which utilized diesel constituents as sole carbon source). Approximately 20% of the isolates were also capable of complete denitrification to nitrogen gas. Sequence analysis of 16S rDNA demonstrated ample diversity with most belonging to the ∝, β and γ subdivision of the Proteobacteria, Bacilli, and Actinobacteria groups. Moreover, the genetic constitution of the microbial community was examined at multiple time points with a Functional Gene Array (FGA) containing over 12,000 probes for genes involved in organic degradation and major biogeochemical cycles. Total community DNA was extracted and amplified using an isothermal φ29 polymerase-based technique, labeled with Cy5 dye, and hybridized to the arrays in 50% formimide overnight at 50°C. Cluster analysis revealed comparable profiles over the course of treatment suggesting the early selection of a very stable microbial community. A total of 270 genes for organic contaminant degradation (including naphthalene, toluene [aerobic and anaerobic], octane, biphenyl, pyrene, xylene, phenanthrene, and benzene); and 333 genes involved in metabolic activities (nitrite and nitrous oxide reductases [nirS, nirK, and nosZ], dissimilatory sulfite reductases [dsrAB], potential metal reducing C-type cytochromes, and methane monooxygenase [pmoA]) were repeatedly detected. Genes for degradation of MTBE, nitroaromatics and chlorinated compounds were also present, indicating a broad catabolic potential of the treatment unit. FGA’s demonstrated the early establishment of a diverse community with concurrent aerobic and anaerobic processes contributing to the bioremediation process.

Stability and performance of Xanthobacter autotrophicus GJ10 during 1,2-dichloroethane biodegradation

A nucleic acid-based approach was used to investigate the dynamics of a microbial community dominated by Xanthobacter autotrophicus GJ10 in the degradation of synthetic wastewater containing 1,2-dichloroethane (DCE). This study was performed over a 140-day period in a nonsterile continuous stirred-tank bioreactor (CSTB) subjected to different operational regimens: nutrient-limiting conditions, baseline operation, and the introduction of glucose as a cosubstrate. The microbial community was analyzed by a combination of fluorescence in situ hybridization (FISH) and denaturing gradient gel electrophoresis (DGGE). Under nutrient-limiting conditions, DCE degradation was restricted, but this did not affect the dominance of strain GJ10, determined by FISH to comprise 85% of the active population. During baseline operation, DCE degradation improved significantly to over 99.5% and then remained constant throughout the subsequent experimental period. DGGE profiles revealed a stable, complex community, while FISH indicated that strain GJ10 remained the dominant species. During the addition of glucose as a cosubstrate, DGGE profiles showed a proliferation of other species in the CSTB. The percentage of strain GJ10 dropped to 8% of the active population in just 5 days, although this did not affect the DCE biodegradation performance. The return to baseline conditions was accompanied by the reestablishment of strain GJ10 as the dominant species, suggesting that this system responds robustly to external perturbations, both at the functional biodegradation level and at the individual strain level.

Physiological traits of bacterial strains isolated from phenol-degrading aerobic granules

The physiological characteristics of ten bacterial strains isolated from phenol-degrading aerobic granules were evaluated in order to identify competitive traits for dominant growth in aerobic granules. The ten strains showed a wide diversity in specific growth rates and oxygen utilization kinetics, and could be divided into four catabolic types of phenol degradation. While some strains degraded phenol mainly via the meta pathway or the ortho pathway, other strains degraded phenol via both these pathways. The ten strains also exhibited high levels of autoaggregation and coaggregation activity. Within the collection of ten strains, 36.7% of all possible strain pairings displayed a measurable degree of coaggregation. Strain PG-08 possessed the strongest autoaggregation activity and showed significant coaggregation (coaggregation indices of 67% to 74%) with PG-02. The three strains PG-01, PG-02 and PG-08 belonging to dominant groups in the granules possessed different competitive characteristics. Microcosm experiments showed the three strains could not coexist at the high phenol concentration of 250 mg L(-1), but could coexist at lower phenol concentrations in a spatially heterogeneous environment. This study illustrated that the spatial heterogeneity provided by the aerobic granules led to niche differentiation and increased physiological diversity in the resident microbial community.

Long-term performance and microbial dynamics of an up-flow fixed bed reactor established for the biodegradation of fluorobenzene

An up-flow fixed bed reactor (UFBR) was established to investigate the biodegradation of fluorobenzene (FB) under a number of operating conditions, which included variation in the concentration of FB in the feed stream (up to 180 mg l(-1)) and temporary suspension of feeding. Degradation of FB was followed for a period of 8 months under a continuous flow regime. During the operation of the UFBR, FB was never detected in the reactor effluent, being biodegraded by the microbial biofilm or adsorbed to the granular activated carbon (GAC). Biodegradation of FB was observed from the beginning of the reactor operation, and overall, it accounted for 50% of the total amount fed to the bioreactor. High organic loads of FB (210-260 mg d(-1) dm(-3)) were found to affect the biological removal efficiency, possibly due to an inhibitory effect caused by the higher FB concentrations fed to the bioreactor (149-179 mg l(-1)). When FB feeding was suspended for 1 month, biodegradation continued, indicating that the adsorbed FB became bioavailable. Biofilm bacterial dynamics were followed throughout the UFBR operation by denaturing gradient gel electrophoresis and plate-counting techniques, showing that a quite stable community was found in the bioreactor, and this was mainly attributed to the high selective pressure exerted by the presence of FB.

Culture-dependent and -independent approaches establish the complexity of a PAH-degrading microbial consortium

A microbial consortium (AM) obtained by sequential enrichment in liquid culture with a polycyclic aromatic hydrocarbon (PAH) mixture of three- and four-ringed PAHs as a sole source of carbon and energy was examined using a triple-approach method based on various cultivation strategies, denaturing gradient gel electrophoresis (DGGE), and the screening of 16S and 18S rRNA gene clone libraries. Eleven different sequences by culture-dependent techniques and seven by both DGGE and clone libraries were obtained. The comparison of three variable regions (V3-V5) of the 16S rRNA gene between the sequences obtained yielded 19 different microbial components. Proteobacteria were the dominant group, representing 83% of the total, while the Cytophaga-Flexibacter-Bacteroides group (CFB) was 11% and the Ascomycota fungi 6%. Beta-proteobacteria were predominant in the DGGE and clone library methods, whereas they were a minority in culturable strains. The highest diversity and number of noncoincident sequences were achieved by the cultivation method that showed members of the alpha-, beta-, and gamma-Proteobacteria; CFB bacterial group; and Ascomycota fungi. Only six of the 11 strains isolated showed PAH-degrading capability. The bacterial strain (AMS7) and the fungal strain (AMF1), which were similar to Sphingomonas sp. and Fusarium sp., respectively, achieved the greatest PAH depletion. The results indicate that polyphasic assessment is necessary for a proper understanding of the composition of a microbial consortium.

Replicability of dominant bacterial populations after long-term surfactant-enrichment in lab-scale activated sludge

Bacterial communities were examined in replicate lab-scale activated sludge reactors after a period of several months of enrichment with non-ionic nonylphenol ethoxylate (NPE) surfactants. Four sequential batch reactors were fed with synthetic sewage, two of which received additionally NPE. Small subunit rDNA-derived denaturing gel gradient electrophoresis (DGGE) profiles and 16S rDNA clone libraries were dominated by clones of Gammaproteobacteria class. Sequences of the other codominant rDNA phylotypes observed only in DGGE from NPE-amended reactors were, respectively, associated with the Group III of the Acidobacteria phylum. Intriguingly, 16S rRNA content from abundant Gammaproteobacteria cells was unexpectedly low. In addition to Acidobacteria, rRNA-derived DGGE profiles were dominated by members of the order Burkholderiales (of the Betaproteobacteria) and of the genus Sphingomonas (a member of the Alphaproteobacteria). Specific oligonucleotide probes for the selected ribotypes were designed and applied for quantitative real time polymerase chain reaction and fluorescence in situ hybridization, confirming their dominance in treated reactors. The parallel abundance of unique phylotypes in replicate reactors implies a distinctive selection of dominant organisms, which are better adapted to specialized niches in the highly selective environment.

Determination of biodegradation potential by two culture-independent methods in PAH-contaminated soils

Biodegradation potentials of polycyclic aromatic hydrocarbons (PAHs) were determined with soil samples collected from various depths of a PAH-contaminated site and of a site nearby where PAHs were not found. Putative dioxygenase genes were amplified by a primer set specific for initial dioxygenases and identified by web-based database homology search. They were further categorized into several groups of which four dioxygenases were selected as probes for DNA hybridization. The hybridization signals according to the presence of putative dioxygenases were positively related to the extent of PAH contamination. However, the signal intensities varied depending on the probes hybridized and moreover were not consistent with PAH biodegradation activities determined by CO2 evolution. Despite widely accepted advantages of molecular biodegradation assessment, our data clearly present the variations of assessment results depending on the genetic information used and suggest that the methodology may tend to underestimate the real biodegradation capacity of a site probably due to the limited dioxygenase database available at the moment. Therefore, the molecular assessment of biodegradation potential should involve a very careful primer and probe design and an extensive microbiological examination of a site of interest to accurately delineate the biodegradation potential of the site.

Effect of carbon starvation on toluene degradation activity by toluene monooxygenase-expressing bacteria

Subsurface bacteria commonly exist in a starvation state with only periodic exposure to utilizable sources of carbon and energy. In this study, the effect of carbon starvation on aerobic toluene degradation was quantitatively evaluated with a selection of bacteria representing all the known toluene oxygenase enzyme pathways. For all the investigated strains, the rate of toluene biodegradation decreased exponentially with starvation time. First-order deactivation rate constants for TMO-expressing bacteria were approximately an order of magnitude greater than those for other oxygenase-expressing bacteria. When growth conditions (the type of growth substrate and the type and concentration of toluene oxygenase inducer) were varied in the cultures prior to the deactivation experiments, the rate of deactivation was not significantly affected, suggesting that the rate of deactivation is independent of previous substrate/inducer conditions. Because TMO-expressing bacteria are known to efficiently detoxify TCE in subsurface environments, these findings have significant implications for in situ TCE bioremediation, specifically for environments experiencing variable growth-substrate exposure conditions.

Changes in bacterial community structure correlate with initial operating conditions of a field-scale denitrifying fluidized bed reactor

High levels of nitrate are present in groundwater migrating from the former waste disposal ponds at the Y-12 National Security Complex in Oak Ridge, TN. A field-scale denitrifying fluidized bed reactor (FBR) was designed, constructed, and operated with ethanol as an electron donor for the removal of nitrate. After inoculation, biofilms developed on the granular activated carbon particles. Changes in the bacterial community of the FBR were evaluated with clone libraries (n = 500 partial sequences) of the small-subunit rRNA gene for samples taken over a 4-month start-up period. Early phases of start-up operation were characterized by a period of selection, followed by low diversity and predominance by Azoarcus-like sequences. Possible explanations were high pH and nutrient limitations. After amelioration of these conditions, diversification increased rapidly, with the appearance of Dechloromonas, Pseudomonas, and Hydrogenophaga sequences. Changes in NO3, SO4, and pH also likely contributed to shifts in community composition. The detection of sulfate-reducing-bacteria-like sequences closely related to Desulfovibrio and Desulfuromonas in the FBR have important implications for downstream applications at the field site.

Effects of long-term benzene pollution on bacterial diversity and community structure in groundwater

In this study we analysed the relationship between bacterial community structures and geochemistry of groundwater in a sandstone aquifer (SIReN site) impacted mainly by BTEX hydrocarbons (benzene, toluene, ethylbenzene and xylenes), of which benzene is most abundant. The long-term presence of benzene reduced bacterial diversity: in groundwaters contaminated with more than 1.8 x 10(4) microg l(-1) of benzene, bacterial diversity was half of that in clean groundwaters. Terminal restriction fragment length polymorphism (T-RFLP) analysis of 16S rDNA revealed that the community structures were very similar in uncontaminated groundwaters, whereas communities subjected to long-term benzene contamination were different, not only from uncontaminated groundwater communities, but also from each other. Canonical correspondence analysis of the community profiles and the geochemical data showed that this divergence in community structure was not primarily caused by the direct toxic or stressful effects of benzene, but by the environmental changes brought about by benzene metabolism, in particular a decrease in redox potential.

Link between spatial structure of microbial communities and degradation of a complex mixture of volatile organic compounds in peat biofilters

AIMS

To investigate the relationships between the operation of the volatile organic compound (VOC) removal biofilter and the structure of microbial communities, and to study the impact on degradation activities and the structuring of microbial communities of biofilter malfunctions related to the qualitative composition of the polluted air.

METHODS AND RESULTS

A microbiological study and a measurement of biodegradation activities were simultaneously carried out on two identical peat-packed columns, seeded with two different inocula, treating polluted air containing 11 VOCs. For both reactors, the spatial structure of the microbial communities was investigated by means of single-strand conformation polymorphism (SSCP) analysis. For both reactors, stratification of degradation activities in function of depth was observed. Oxygenated compounds were removed at the top of the column and aromatics at the bottom. Comparison of SSCP patterns clearly showed a shift in community structure in function of depth inside both biofilters. This distribution of biodegradation activities correlates with the spatialization of microbial density and diversity. Although the operating conditions of both reactors were identical and the biodegradation activities similar, the composition of microflora differed for biofilters A and B. Subdivision of biofilter B into two independent parts supplied with polluted air containing the complex VOC mixture showed that the microflora having colonized the bottom of biofilter B retained their potential for degrading oxygenated compounds.

CONCLUSIONS

This work highlights the spatialization of biodegradation functions in a biofilter treating a complex mixture of VOCs. This distribution of biodegradation activities correlates with the spatialization of microbial density and diversity.

SIGNIFICANCE AND IMPACT OF THE STUDY

This vertical structure of microbial communities must be taken into consideration when dealing with the malfunctioning of bioreactors. These results are also useful information about changes in microbial communities following natural or anthropogenic alterations in different ecosystems (soils and sediments) where structuring of microbial communities according to depth has been observed.

Species abundance and diversity of Burkholderia cepacia complex in the environment

Despite considerable interest in studying Burkholderia cepacia complex in the environment, we still do not have efficient methods to detect, isolate, and screen large numbers of B. cepacia isolates. To better describe the ecology and diversity of B. cepacia complex, a colony hybridization assay was developed to detect specifically all species of the complex based on polymorphism of the variable V3 region of the 16S rRNA sequence. The sensitivity of the assay was dramatically enhanced by using a probe consisting of three repeats of a B. cepacia complex-specific probe, each separated by a phosphoramidite spacer. In addition, a duplex PCR targeting B. cepacia complex-specific recA and 16S rRNA sequences was developed to enable a fast and reliable diagnostic assay for members of the complex. When applied to maize rhizosphere samples, colony hybridization results were in good agreement with those of most-probable-number duplex PCR, both indicating a >100-fold fluctuation of abundance between individual plants. Using restriction analysis of recA for a total of 285 confirmed isolates of the B. cepacia complex, up to seven B. cepacia complex species were identified; however, their diversity and abundance were not evenly distributed among individual plants, and several allelic variants were commonly found from the same rhizosphere sample. These results indicate that not only complex communities of B. cepacia complex species and closely related strains of the same species may coexist at high population levels but also species composition and abundance may dramatically vary between individual plants.

Biofiltration of volatile organic compounds

The removal of volatile organic compounds (VOCs) from contaminated airstreams has become a major air pollution concern. Improvement of the biofiltration process commonly used for the removal of odorous compounds has led to a better control of key parameters, enabling the application of biofiltration to be extended also to the removal of VOCs. Moreover, biofiltration, which is based on the ability of micro-organisms to degrade a large variety of compounds, proves to be economical and environmentally viable. In a biofilter, the waste gas is forced to rise through a layer of packed porous material. Thus, pollutants contained in the gaseous effluent are oxidised or converted into biomass by the action of microorganisms previously fixed on the packing material. The biofiltration process is then based on two principal phenomena: (1) transfer of contaminants from the air to the water phase or support medium, (2) bioconversion of pollutants to biomass, metabolic end-products, or carbon dioxide and water. The diversity of biofiltration mechanisms and their interaction with the microflora mean that the biofilter is defined as a complex and structured ecosystem. As a result, in addition to operating conditions, research into the microbial ecology of biofilters is required in order better to optimise the management of such biological treatment systems.

Sulfide-oxidizing activity and bacterial community structure in a fluidized bed reactor from a zero-discharge mariculture system

In the present work we describe a comprehensive analysis of sulfide oxidation in a fluidized bed reactor (FBR) from an environmentally sustainable, zero-discharge mariculture system. The FBR received oxygen-depleted effluent from a digestion basin (DB) that is responsible for gasification of organic matter and nitrogen. The FBR is a crucial component in this recirculating system because it safeguards the fish from the toxic sulfide produced in the DB. Microscale sulfide oxidation potential and bacterial community composition within FBR biofilms were correlated to biofilter performance by integrating bulk chemical, microsensor (O2, pH, and H2S), and molecular microbial community analyses. The FBR consistently oxidized sulfide during two years of continuous operation, with an estimated average sulfide removal rate of 1.3 g of sulfide-S L(FBR)(-1) d(-1). Maximum sulfide oxidation rates within the FBR biofilms were 0.36 and 0.21 mg of sulfide-S cm(-3) h(-1) in the oxic and anoxic layers, respectively, indicating that both oxygen and nitrate serve as electron acceptors for sulfide oxidation. The estimated anoxic sulfide removal rate, as extrapolated from bench scale, autotrophic, nitrate-amended experiments, was 0.7 g of sulfide-S L(FBR)(-1) d(-1), which is approximately 50% of the total estimated sulfide removal in the FBR. Community composition analyses using denaturing gradient gel electrophoresis (DGGE) of bacterial 16S rRNA gene fragments from FBR samples taken at six-month intervals revealed several sequences that were closely affiliated with sulfide-oxidizing bacteria. These included the denitrifying, sulfide-oxidizing bacteria Thiomicrospira denitrificans, members of the filamentous Thiothrix genus, and sulfide-oxidizing symbionts from the Gammaproteobacteria. In addition, marine Alphaproteobacteria and Bacteroidetes species were present in all of the DGGE profiles examined. DGGE analyses showed significant shifts in the bacterial community composition between profiles over two years of sampling, indicating the presence of a diverse and dynamic microbial community within the functionally stable FBR. The FBR's combined capacity for both oxic and anoxic sulfide oxidation, as indicated by bulk chemical, microsensor, and molecular microbial analyses, gives it significant functional elasticity, which is crucial for proper performance in the dynamic environment of this mariculture system.

The impact of ultraviolet light on bacterial adhesion to glass and metal oxide-coated surface

Biofouling of glass and quartz surfaces can be reduced when the surface is coated with photocatalytically active metal oxides, such as TiO2 (anatase form) or SnO2. We measured the attachment of eight strains of bacteria to these two metal oxides (TiO2 and SnO2), and to an uncoated glass (control; designated Si-m) before and after exposure to UV light at wavelengths of 254 nm (UVC) or 340 nm UV (UVA). TiO2-coated surfaces were photocatalytically active at both 254 and 340 nm as evidenced by a decrease in the water contact angle of the surface from 59 degrees +/-2 to <5 degrees. The water contact angle of the SnO2 surface was reduced only at 254 nm, while contact angle of the Si-m glass surface was not altered by light of either wavelength. Bacterial adhesion decreased by 10-50% to photocatalyzed glass surfaces. In all cases, bacteria exposed to the UV light were completely killed due to a combination of exposure to UV light and the photocatalytic activity of the glass surfaces. These results show that UV light irradiation of TiO2-coated surfaces can be an effective method of reducing bacterial adhesion.

Bacterial diversity and function of aerobic granules engineered in a sequencing batch reactor for phenol degradation

Aerobic granules are self-immobilized aggregates of microorganisms and represent a relatively new form of cell immobilization developed for biological wastewater treatment. In this study, both culture-based and culture-independent techniques were used to investigate the bacterial diversity and function in aerobic phenol- degrading granules cultivated in a sequencing batch reactor. Denaturing gradient gel electrophoresis (DGGE) analysis of PCR-amplified 16S rRNA genes demonstrated a major shift in the microbial community as the seed sludge developed into granules. Culture isolation and DGGE assays confirmed the dominance of beta-Proteobacteria and high-G+C gram-positive bacteria in the phenol-degrading aerobic granules. Of the 10 phenol-degrading bacterial strains isolated from the granules, strains PG-01, PG-02, and PG-08 possessed 16S rRNA gene sequences that matched the partial sequences of dominant bands in the DGGE fingerprint belonging to the aerobic granules. The numerical dominance of strain PG-01 was confirmed by isolation, DGGE, and in situ hybridization with a strain-specific probe, and key physiological traits possessed by PG-01 that allowed it to outcompete and dominate other microorganisms within the granules were then identified. This strain could be regarded as a functionally dominant strain and may have contributed significantly to phenol degradation in the granules. On the other hand, strain PG-08 had low specific growth rate and low phenol degradation ability but showed a high propensity to autoaggregate. By analyzing the roles played by these two isolates within the aerobic granules, a functional model of the microbial community within the aerobic granules was proposed. This model has important implications for rationalizing the engineering of ecological systems.

Bacterial adhesion to glass and metal-oxide surfaces

Metal oxides can increase the adhesion of negatively-charged bacteria to surfaces primarily due to their positive charge. However, the hydrophobicity of a metal-oxide surface can also increase adhesion of bacteria. In order to understand the relative contribution of charge and hydrophobicity to bacterial adhesion, we measured the adhesion of 8 strains of bacteria, under conditions of low and high-ionic strength (1 and 100 mM, respectively) to 11 different surfaces and examined adhesion as a function of charge, hydrophobicity (water contact angle) and surface energy. Inorganic surfaces included three uncoated glass surfaces and eight metal-oxide thin films prepared on the upper (non-tin-exposed) side of float glass by chemical vapor deposition. The Gram-negative bacteria differed in lengths of lipopolysaccharides on their outer surface (three Escherichia coli strains), the amounts of exopolysaccharides (two Pseudomonas aeruginosa strains), and their known relative adhesion to sand grains (two Burkholderia cepacia strains). One Gram positive bacterium was also used that had a lower adhesion to glass than these other bacteria (Bacillus subtilis). For all eight bacteria, there was a consistent increase in adhesion between with the type of inorganic surface in the order: float glass exposed to tin (coded here as Si-Sn), glass microscope slide (Si-m), uncoated air-side float glass surface (Si-a), followed by thin films of (Co(1-y-z)Fe(y)Cr(z))3O4, Ti/Fe/O, TiO2, SnO2, SnO2:F, SnO2:Sb, A1(2)O3, and Fe2O3 (the colon indicates metal doping, a slash indicates that the metal is a major component, while the dash is used to distinguish surfaces). Increasing the ionic strength from 1 to 100 mM increased adhesion by a factor of 2.0 +/- 0.6 (73% of the sample results were within the 95% CI) showing electrostatic charge was important in adhesion. However, adhesion was not significantly correlated with bacterial charge and contact angle. Adhesion (A) of the eight strains was significantly (P < 10(-25)) correlated with total adhesion free energy (U) between the bacteria and surface (A = 2162e(-1.8U)). Although the correlation was significant, agreement between the model and data was poor for the low energy surfaces (R2 = 0.68), indicating that better models or additional methods to characterize bacteria and surfaces are still needed to more accurately describe initial bacterial adhesion to inorganic surfaces.

Strain stability in biological systems treating recalcitrant organic compounds

The availability of molecular probing technology in recent years has facilitated investigation of microbial community composition during bio-treatment of organic wastes. Particularly, it has allowed the study of microbial culture stability and correlation between stability and treatment performance. However, most studies to date have only addressed mixed cultures and there is limited information regarding single strain stability. Here we have investigated the microbial community dynamics in two bioreactors, each inoculated with a pure bacterial strain capable of degrading a recalcitrant substrate, namely Xanthobacter aut. GJ10 degrading 1,2-dichloroethane (DCE) and Burkholderia sp. JS150 degrading monochlorobenzene (MCB). Universal and strain specific 16S rRNA oligonucleotide probes were designed and used to follow strain stability. The bioreactor fed with DCE was functionally stable and the percentage of GJ10 cells in the community remained high (around 95% of total cells) throughout, even after introduction of foreign microorganisms. The bioreactor fed with MCB was also functionally stable, but in contrast to the DCE bioreactor, probing results revealed the disappearance of strain JS150 from the bioreactor within a week. The difference in behavior between the two systems is attributed to the specific pathway required to degrade DCE.

Correspondence between community structure and function during succession in phenol- and phenol-plus-trichloroethene-fed sequencing batch reactors

The effects of more than 2 years of trichloroethene (TCE) application on community succession and function were studied in two aerobic sequencing batch reactors. One reactor was fed phenol, and the second reactor was fed both phenol and TCE in sequence twice per day. After initiation of TCE loading in the second reactor, the TCE transformation rates initially decreased, but they stabilized with an average second-order rate coefficient of 0.044 liter mg(-1) day(-1) for 2 years. In contrast, the phenol-fed reactor showed higher and unstable TCE transformation rates, with an average rate coefficient of 0.093 liter mg(-1) day(-1). Community analysis by terminal restriction fragment length polymorphism (T-RFLP) analysis of the 16S rRNA genes showed that the phenol-plus-TCE-fed reactor had marked changes in community structure during the first 100 days and remained relatively stable afterwards, corresponding to the period of stable function. In contrast, the community structure of the phenol-fed reactor changed periodically, and the changes coincided with the periodicity observed in the TCE transformation rates. Correspondence analysis of each reactor community showed that different community structures corresponded with function (TCE degradation rate). Furthermore, the phenol hydroxylase genotypes, as determined by restriction fragment length polymorphism analysis, corresponded to community structure patterns identified by T-RFLP analysis and to periods when the TCE transformation rates were high. Long-term TCE stress appeared to select for a different and stable community structure, with lower but stable TCE degradation rates. In contrast, the community under no stress exhibited a dynamic structure and dynamic function.