The alpha-helix 4 residue, Asn135, is involved in the oligomerization of Cry1Ac1 and Cry1Ab5 Bacillus thuringiensis toxins

Bacillus thuringiensis Cry9Aa Insecticidal Protein Domain I Helices α3 and α4 Are Two Core Regions Involved in Oligomerization and Toxicity

Bacillus thuringiensis Cry9 proteins show high insecticidal activity against different lepidopteran pests. Cry9 could be a valuable alternative to Cry1 proteins because it showed a synergistic effect with no cross-resistance. However, the pore-formation region of the Cry9 proteins is still unclear. In this study, nine mutations of certain Cry9Aa helices α3 and α4 residues resulted in a complete loss of insecticidal activity against the rice pest Chilo suppressalis; however, the protein stability and receptor binding ability of these mutants were not affected. Among these mutants, Cry9Aa-D121R, Cry9Aa-D125R, Cry9Aa-D163R, Cry9Aa-E165R, and Cry9Aa-D167R are unable to form oligomers in vitro, while the oligomers formed by Cry9Aa-R156D, Cry9Aa-R158D, and Cry9Aa-R160D are unstable and failed to insert into the membrane. These data confirmed that helices α3 and α4 of Cry9Aa are involved in oligomerization, membrane insertion, and toxicity. The knowledge of Cry9 pore-forming action may promote its application as an alternative to Cry1 insecticidal proteins.

Channel Formation in Cry Toxins: An Alphafold-2 Perspective

Bacillus thuringiensis (Bt) strains produce pore-forming toxins (PFTs) that attack insect pests. Information for pre-pore and pore structures of some of these Bt toxins is available. However, for the three-domain (I-III) crystal (Cry) toxins, the most used Bt toxins in pest control, this crucial information is still missing. In these Cry toxins, biochemical data have shown that 7-helix domain I is involved in insertion in membranes, oligomerization and formation of a channel lined mainly by helix α4, whereas helices α1 to α3 seem to have a dynamic role during insertion. In the case of Cry1Aa, toxic against Manduca sexta larvae, a tetrameric oligomer seems to precede membrane insertion. Given the experimental difficulty in the elucidation of the membrane insertion steps, we used Alphafold-2 (AF2) to shed light on possible oligomeric structural intermediates in the membrane insertion of this toxin. AF2 very accurately (<1 Å RMSD) predicted the crystal monomeric and trimeric structures of Cry1Aa and Cry4Ba. The prediction of a tetramer of Cry1Aa, but not Cry4Ba, produced an 'extended model' where domain I helices α3 and α2b form a continuous helix and where hydrophobic helices α1 and α2 cluster at the tip of the bundle. We hypothesize that this represents an intermediate that binds the membrane and precedes α4/α5 hairpin insertion, together with helices α6 and α7. Another Cry1Aa tetrameric model was predicted after deleting helices α1 to α3, where domain I produced a central cavity consistent with an ion channel, lined by polar and charged residues in helix α4. We propose that this second model corresponds to the 'membrane-inserted' structure. AF2 also predicted larger α4/α5 hairpin n-mers (14 ≤n ≤ 17) with high confidence, which formed even larger (~5 nm) pores. The plausibility of these models is discussed in the context of available experimental data and current paradigms.

Group Selection as a Basis for Screening Mutagenized Libraries of Public Goods (Bacillus thuringiensis Cry Toxins)

The pesticidal toxins of Bacillus thuringiensis (Bt) supply the active proteins for genetically modified insect-resistant crops. There is therefore keen interest in finding new toxins, or improving known toxins, in order to increase the mortality of various targets. The production and screening of large libraries of mutagenized toxins are among the means of identifying improved toxins. Since Cry toxins are public goods, and do not confer advantages to producers in competition, conventional directed evolution approaches cannot be used here. Instead, thousands of individual mutants have to be sequenced and assayed individually, a costly and time-consuming process. In this study, we tested a group selection-based approach that could be used to screen an uncharacterized pool of Cry toxin mutants. This involved selecting for infectivity between subpopulations of Bt clones within metapopulations of infected insects in three rounds of passage. We also tested whether additional mutagenesis from exposure to ethyl methanesulfonate could increase infectivity or supply additional Cry toxin diversity during passage. Sequencing of pools of mutants at the end of selection showed that we could effectively screen out Cry toxin variants that had reduced toxicity with our group selection approach. The addition of extra mutagenesis during passage decreased the efficiency of selection for infectivity and did not produce any additional novel toxin diversity. Toxins with loss-of-function mutations tend to dominate mutagenized libraries, and so a process for screening out these mutants without time-consuming sequencing and characterization steps could be beneficial when applied to larger libraries. IMPORTANCE Insecticidal toxins from the bacterium Bacillus thuringiensis are widely exploited in genetically modified plants. This application creates a demand for novel insecticidal toxins that can be used to better manage resistant pests or control new or recalcitrant target species. An important means of producing novel toxins is via high-throughput mutagenesis and screening of existing toxins, a lengthy and resource-intensive process. This study describes the development and testing of an efficient means of screening a test library of mutagenized insecticidal toxins. Here, we showed that it is possible to screen out loss-of-function mutations with low infectivity within a pool without the need to characterize and sequence each mutant individually. This has the potential to improve the efficiency of processes used to identify novel proteins.

Structural changes upon membrane insertion of the insecticidal pore-forming toxins produced by Bacillus thuringiensis

Different Bacillus thuringiensis (Bt) strains produce a broad variety of pore-forming toxins (PFTs) that show toxicity against insects and other invertebrates. Some of these insecticidal PFT proteins have been used successfully worldwide to control diverse insect crop pests. There are several studies focused on describing the mechanism of action of these toxins that have helped to improve their performance and to cope with the resistance evolved by different insects against some of these proteins. However, crucial information that is still missing is the structure of pores formed by some of these PFTs, such as the three-domain crystal (Cry) proteins, which are the most commercially used Bt toxins in the biological control of insect pests. In recent years, progress has been made on the identification of the structural changes that certain Bt insecticidal PFT proteins undergo upon membrane insertion. In this review, we describe the models that have been proposed for the membrane insertion of Cry toxins. We also review the recently published structures of the vegetative insecticidal proteins (Vips; e.g. Vip3) and the insecticidal toxin complex (Tc) in the membrane-inserted state. Although different Bt PFTs show different primary sequences, there are some similarities in the three-dimensional structures of Vips and Cry proteins. In addition, all PFTs described here must undergo major structural rearrangements to pass from a soluble form to a membrane-inserted state. It is proposed that, despite their structural differences, all PFTs undergo major structural rearrangements producing an extended α-helix, which plays a fundamental role in perforating their target membrane, resulting in the formation of the membrane pore required for their insecticidal activity.

A major conformational change of N-terminal helices of Bacillus thuringiensis Cry1Ab insecticidal protein is necessary for membrane insertion and toxicity

Pore forming toxins rely on oligomerization for membrane insertion to kill their targets. Bacillus thuringiensis produces insecticidal Cry-proteins composed of three domains that form pores that kill the insect larvae. Domain I is involved in oligomerization and membrane insertion, whereas Domains II and III participate in receptor binding and specificity. However, the structural changes involved in membrane insertion of these proteins remain unsolved. The most widely accepted model for membrane insertion, the 'umbrella model', proposed that the α-4/α-5 hairpin of Domain I swings away and is inserted into the membrane. To determine the topology of Cry1Ab in the membrane, disulfide bonds linking α-helices of Domain I were introduced to restrict their movement. Disulfide bonds between helices α-2/α-3 or α-3/α-4 lost oligomerization and toxicity, indicating that movement of these helices is needed for insecticidal activity. By contrast, disulfide bonds linking helices α-5/α-6 did not affect toxicity, which contradicts the 'umbrella model'. Additionally, Föster resonance energy transfer closest approach analyses measuring distances of different points in the toxin to the membrane plane and collisional quenching assays analysing the protection of specific fluorescent-labeled residues to the soluble potassium iodide quencher in the membrane inserted state were performed. Overall, the data show that Domain I from Cry1Ab may undergo a major conformational change during its membrane insertion, where the N-terminal region (helices α-1 to α-4) participates in oligomerization and toxicity, probably forming an extended helix. These data break a paradigm, showing a new 'folding white-cane model', which better explains the structural changes of Cry toxins during insertion into the membrane.

Study of the Bacillus thuringiensis Cry1Ia Protein Oligomerization Promoted by Midgut Brush Border Membrane Vesicles of Lepidopteran and Coleopteran Insects, or Cultured Insect Cells

Bacillus thuringiensis (Bt) produces insecticidal proteins that are either secreted during the vegetative growth phase or accumulated in the crystal inclusions (Cry proteins) in the stationary phase. Cry1I proteins share the three domain (3D) structure typical of crystal proteins but are secreted to the media early in the stationary growth phase. In the generally accepted mode of action of 3D Cry proteins (sequential binding model), the formation of an oligomer (tetramer) has been described as a major step, necessary for pore formation and subsequent toxicity. To know if this could be extended to Cry1I proteins, the formation of Cry1Ia oligomers was studied by Western blot, after the incubation of trypsin activated Cry1Ia with insect brush border membrane vesicles (BBMV) or insect cultured cells, using Cry1Ab as control. Our results showed that Cry1Ia oligomers were observed only after incubation with susceptible coleopteran BBMV, but not following incubation with susceptible lepidopteran BBMV or non-susceptible Sf21 insect cells, while Cry1Ab oligomers were persistently detected after incubation with all insect tissues tested, regardless of its host susceptibility. The data suggested oligomerization may not necessarily be a requirement for the toxicity of Cry1I proteins.

Functional assembly of 260-kDa oligomers required for mosquito-larvicidal activity of the Bacillus thuringiensis Cry4Ba toxin

Oligomerization has been shown to contribute to the toxicity of Bacillus thuringiensis Cry toxins. Mutations have been made in the Cry4Ba toxin and resulted in toxic to non-toxic mutants toward Aedes aegypti larvae. In this study, Cry4Ba wild type and mutants were analyzed for oligomer formation in vitro, biochemical properties and their relationships with larvicidal activity. In vitro, the Cry4Ba forms two-main types of the oligomers including (1) the 260-kDa and larger oligomers, which assembled in the carbonate buffer, pH 10.0 and completely dissociated by heating at 90°C and (2) 190-kDa oligomer, which was induced by heat, sodium-salt and detergent addition. Polar and charge residues in the toxin domain I and II may contribute to formation of the 260-kDa oligomers. A single Cys-525 in domain III was replaced with serine resulting in the C525S mutant, which exhibited a 50% reduction in larvicidal activity compared to the Cry4Ba wild-type. The mutant exhibited partial loss in larger oligomer of the 260kDa and total loss of 190-kDa oligomer. The results revealed an important role of the Cys-525 in intermolecular disulfide formation of larger oligomer as well as the 190-kDa oligomer. Despite of their formations in the receptor free condition, the 260-kDa and larger oligomers were found to strongly correspond to Cry4Ba toxicity suggesting their functional roles in the A. aegypti larvae. Also, possible roles of the 260-kDa and larger oligomers have been proposed in this report.

Structural insights into Bacillus thuringiensis Cry, Cyt and parasporin toxins

Since the first X-ray structure of Cry3Aa was revealed in 1991, numerous structures of B. thuringiensis toxins have been determined and published. In recent years, functional studies on the mode of action and resistance mechanism have been proposed, which notably promoted the developments of biological insecticides and insect-resistant transgenic crops. With the exploration of known pore-forming toxins (PFTs) structures, similarities between PFTs and B. thuringiensis toxins have provided great insights into receptor binding interactions and conformational changes from water-soluble to membrane pore-forming state of B. thuringiensis toxins. This review mainly focuses on the latest discoveries of the toxin working mechanism, with the emphasis on structural related progress. Based on the structural features, B. thuringiensis Cry, Cyt and parasporin toxins could be divided into three categories: three-domain type α-PFTs, Cyt toxin type β-PFTs and aerolysin type β-PFTs. Structures from each group are elucidated and discussed in relation to the latest data, respectively.

Molecular approaches to improve the insecticidal activity of Bacillus thuringiensis Cry toxins

Bacillus thuringiensis (Bt) is a gram-positive spore-forming soil bacterium that is distributed worldwide. Originally recognized as a pathogen of the silkworm, several strains were found on epizootic events in insect pests. In the 1960s, Bt began to be successfully used to control insect pests in agriculture, particularly because of its specificity, which reflects directly on their lack of cytotoxicity to human health, non-target organisms and the environment. Since the introduction of transgenic plants expressing Bt genes in the mid-1980s, numerous methodologies have been used to search for and improve toxins derived from native Bt strains. These improvements directly influence the increase in productivity and the decreased use of chemical insecticides on Bt-crops. Recently, DNA shuffling and in silico evaluations are emerging as promising tools for the development and exploration of mutant Bt toxins with enhanced activity against target insect pests. In this report, we describe natural and in vitro evolution of Cry toxins, as well as their relevance in the mechanism of action for insect control. Moreover, the use of DNA shuffling to improve two Bt toxins will be discussed together with in silico analyses of the generated mutations to evaluate their potential effect on protein structure and cytotoxicity.

Bacillus thuringiensis Cry1A toxins are versatile proteins with multiple modes of action: two distinct pre-pores are involved in toxicity

Cry proteins from Bacillus thuringiensis are insecticidal PFTs (pore-forming toxins). In the present study, we show that two distinct functional pre-pores of Cry1Ab are formed after binding of the protoxin or the protease-activated toxin to the cadherin receptor, but before membrane insertion. Both pre-pores actively induce pore formation, although with different characteristics, and contribute to the insecticidal activity. We also analysed the oligomerization of the mutant Cry1AbMod protein. This mutant kills different insect populations that are resistant to Cry toxins, but lost potency against susceptible insects. We found that the Cry1AbMod-protoxin efficiently induces oligomerization, but not the activated Cry1AbMod-toxin, explaining the loss of potency of Cry1AbMod against susceptible insects. These data are relevant for the future control of insects resistant to Cry proteins. Our data support the pore-formation model involving sequential interaction with different midgut proteins, leading to pore formation in the target membrane. We propose that not only different insect targets could have different receptors, but also different midgut proteases that would influence the rate of protoxin/toxin activation. It is possible that the two pre-pore structures could have been selected for in evolution, since they have differential roles in toxicity against selected targets, increasing their range of action. These data assign a functional role for the protoxin fragment of Cry PFTs that was not understood previously. Most PFTs produced by other bacteria are secreted as protoxins that require activation before oligomerization, to finally form a pore. Thus different pre-pores could be also part of the general mechanism of action of other PFTs.

Two distinct functional pre-pore oligomers of the Cry1Ab insecticidal toxin are formed before membrane insertion. These oligomers are formed after binding of either the protoxin or the protease-activated toxin to the cadherin receptor. Both pre-pores have different characteristics and contribute to insecticidal activity.

A conserved tetrameric interaction of cry toxin helix α3 suggests a functional role for toxin oligomerization

Crystal (Cry) toxins are widely used for insect control, but their mechanism of toxicity is still uncertain. These toxins can form lytic pores in vitro, and water soluble tetrameric pre-pore intermediates have been reported. Even the precise oligomeric state of the toxin in membranes, trimeric or tetrameric, is still a debated issue. Based on previous reports, we have assumed that interactions between toxin monomers in solution are at least partly mediated by domain I, and we have analyzed in silico the homo-oligomerization tendencies of the domain I α-helices individually. Using many homologous sequences for each α-helix, our strategy allows selection of evolutionarily conserved interactions. These interactions appeared only in helices α3 and α5, but only α3 produced a suitably oriented or α-helical sample in lipid bilayers, forming homotetramers in C14-betaine, and allowing determination of its rotational orientation in lipid bilayers using site-specific infrared dichroism (SSID). The determined orientation in the tetrameric model is in agreement with only one of the evolutionarily conserved models. In addition mutation R99E, which was found to inhibit oligomerization experimentally, greatly destabilized the tetramer in molecular dynamic simulations. In this model, helix 3 is able to form inter-monomer interactions without significant rearrangements of domain I, which is compatible with the available crystal structure of Cry toxins in solution. The model presented here at least partially explains the reported tetrameric oligomerization of Cry toxins in solution and the inhibition of this oligomerization by a synthetic α3 peptide.

Insect tolerance to the crystal toxins Cry1Ac and Cry2Ab is mediated by the binding of monomeric toxin to lipophorin glycolipids causing oligomerization and sequestration reactions

Endotoxins from the soil bacterium Bacillus thuringiensis are used worldwide to control insect pests and vectors of diseases. Despite extensive use of the toxins as sprays and in transgenic crops, their mode of action is still not completely known. Here we show that two crystal toxins binding to different glycoprotein receptors have similar glycolipid binding properties. The glycolipid binding domain was identified in a recombinant peptide representing the domain II of the crystal toxin Cry1Ac (M-peptide). The recombinant M-peptide was isolated from bacterial lysates as a mixture of monomers and dimers and formed tetramers upon binding to glycolipid microvesicles from gut tissues and lipid particles from hemolymph plasma. Likewise, when mature toxins and M-peptides where mixed with plasma, these peptides bind to lipid particles and can be separated with lipophorin particles on low-density gradients. When mature toxin and M-peptides are added to lipid particles in increasing amounts, the peptide-particle complexes form higher aggregates that are similar to aggregates formed in low-density gradients in the presence of the toxin. This could indicate that glycolipids on lipid particles are possible targets for toxin monomers in the gut lumen, which upon binding to the glycolipids form tetramers and aggregate particles and thereby sequester the toxin inside the gut lumen before it can interact with receptors on the brush border membrane. The implication is that domain II interacting with glycolipids mediate tolerance to the toxin that is separate from interaction of the toxin with glycoprotein receptors causing toxicity.

Single molecule fluorescence study of the Bacillus thuringiensis toxin Cry1Aa reveals tetramerization

Pore-forming toxins constitute a class of potent virulence factors that attack their host membrane in a two- or three-step mechanism. After binding to the membrane, often aided by specific receptors, they form pores in the membrane. Pore formation either unfolds a cytolytic activity in itself or provides a pathway to introduce enzymes into the cells that act upon intracellular proteins. The elucidation of the pore-forming mechanism of many of these toxins represents a major research challenge. As the toxins often refold after entering the membrane, their structure in the membrane is unknown, and key questions such as the stoichiometry of individual pores and their mechanism of oligomerization remain unanswered. In this study, we used single subunit counting based on fluorescence spectroscopy to explore the oligomerization process of the Cry1Aa toxin of Bacillus thuringiensis. Purified Cry1Aa toxin molecules labeled at different positions in the pore-forming domain were inserted into supported lipid bilayers, and the photobleaching steps of single fluorophores in the fluorescence time traces were counted to determine the number of subunits of each oligomer. We found that toxin oligomerization is a highly dynamic process that occurs in the membrane and that tetramers represent the final form of the toxins in a lipid bilayer environment.

Pore formation by Cry toxins

Bacillus thuringiensis (Bt) bacteria produce insecticidal Cry and Cyt proteins used in the biological control of different insect pests. In this review, we will focus on the 3d-Cry toxins that represent the biggest group of Cry proteins and also on Cyt toxins. The 3d-Cry toxins are pore-forming toxins that induce cell death by forming ionic pores into the membrane of the midgut epithelial cells in their target insect. The initial steps in the mode of action include ingestion of the protoxin, activation by midgut proteases to produce the toxin fragment and the interaction with the primary cadherin receptor. The interaction of the monomeric CrylA toxin with the cadherin receptor promotes an extra proteolytic cleavage, where helix alpha-1 of domain I is eliminated and the toxin oligomerization is induced, forming a structure of 250 kDa. The oligomeric structure binds to a secondary receptor, aminopeptidase N or alkaline phosphatase. The secondary receptor drives the toxin into detergent resistant membrane microdomains formingpores that cause osmotic shock, burst of the midgut cells and insect death. Regarding to Cyt toxins, these proteins have a synergistic effect on the toxicity of some Cry toxins. Cyt proteins are also proteolytic activated in the midgut lumen of their target, they bind to some phospholipids present in the mosquito midgut cells. The proposed mechanism of synergism between Cry and Cyt toxins is that Cyt1Aa function as a receptor for Cry toxins. The Cyt1A inserts into midgut epithelium membrane and exposes protein regions that are recognized by Cry11Aa. It was demonstrated that this interaction facilitates the oligomerization of Cry11Aa and also its pore formation activity.

Helix alpha 4 of the Bacillus thuringiensis Cry1Aa toxin plays a critical role in the postbinding steps of pore formation

Helix alpha 4 of Bacillus thuringiensis Cry toxins is thought to play a critical role in the toxins' mode of action. Accordingly, single-site substitutions of many Cry1Aa helix alpha 4 amino acid residues have previously been shown to cause substantial reductions in the protein's pore-forming activity. Changes in protein structure and formation of intermolecular disulfide bonds were investigated as possible factors responsible for the inactivity of these mutants. Incubation of each mutant with trypsin and chymotrypsin for 12 h did not reveal overt structural differences with Cry1Aa, although circular dichroism was slightly decreased in the 190- to 210-nm region for the I132C, S139C, and V150C mutants. The addition of dithiothreitol stimulated pore formation by the E128C, I132C, S139C, T142C, I145C, P146C, and V150C mutants. However, in the presence of these mutants, the membrane permeability never reached that measured for Cry1Aa, indicating that the formation of disulfide bridges could only partially explain their loss of activity. The ability of a number of inactive mutants to compete with wild-type Cry1Aa for pore formation in brush border membrane vesicles isolated from Manduca sexta was also investigated with an osmotic swelling assay. With the exception of the L147C mutant, all mutants tested could inhibit the formation of pores by Cry1Aa, indicating that they retained receptor binding ability. These results strongly suggest that helix alpha 4 is involved mainly in the postbinding steps of pore formation.

Cysteine scanning mutagenesis of alpha4, a putative pore-lining helix of the Bacillus thuringiensis insecticidal toxin Cry1Aa

Helix alpha4 of Bacillus thuringiensis Cry toxins is thought to line the lumen of the pores they form in the midgut epithelial cells of susceptible insect larvae. To define its functional role in pore formation, most of the alpha4 amino acid residues were replaced individually by a cysteine in the Cry1Aa toxin. The toxicities and pore-forming abilities of the mutated toxins were examined, respectively, by bioassays using neonate Manduca sexta larvae and by a light-scattering assay using midgut brush border membrane vesicles isolated from M. sexta. A majority of these mutants had considerably reduced toxicities and pore-forming abilities. Most mutations causing substantial or complete loss of activity map on the hydrophilic face of the helix, while most of those having little or only relatively minor effects map on its hydrophobic face. The properties of the pores formed by mutants that retain significant activity appear similar to those of the pores formed by the wild-type toxin, suggesting that mutations resulting in a loss of activity interfere mainly with pore formation.

The pre-pore from Bacillus thuringiensis Cry1Ab toxin is necessary to induce insect death in Manduca sexta

The insecticidal Cry toxins from Bacillus thuringiensis bacteria are pore-forming toxins that lyse midgut epithelial cells in insects. We have previously proposed that they form pre-pore oligomeric intermediates before membrane insertion. For formation of these oligomers coiled-coil structures are important, and helix alpha-3 from Cry toxins could form coiled-coils. Our data shows that different mutations in helix alpha-3 are affected in pore formation and toxicity. Mutants affected in toxicity bind Bt-R(1) receptor with a similar K(D) as the wild type toxin but do not form oligomers nor induce pore formation in planar lipid bilayers, indicating that the pre-pore oligomer is an obligate intermediate in the intoxication of Cry1Ab toxin and that interaction of monomeric Cry1Ab with Bt-R(1) is not enough to kill susceptible larvae.

A trimeric building block model for Cry toxins in vitro ion channel formation

The crystal (Cry) insecticidal toxins, or delta-endotoxins, are lethal to a wide variety of insect larvae, and are therefore very important in insect control. Toxicity has been explained by formation of transmembrane oligomeric pores or ion channels and, more recently, by the ability of the monomeric toxin to subvert cellular signaling pathways. The structure, topology, and precise role of the putative pore in toxicity are not known. However, in vitro biophysical studies suggest that helices alpha4 and alpha5 in domain I insert into the lipid bilayer as an alpha-helical hairpin. Mutagenesis studies have assigned an important role to alpha5 in maintaining oligomerization, and to alpha4 in channel formation. To detect the possible homo-oligomerizing tendencies of these two helices, we have used the evolutionary conservation data contained in sixteen Cry homologs in order to filter non-native interactions found during a global conformational search. No conserved homo-oligomer was found for alpha4, but a right handed trimeric alpha5 model was present in the simulations of all Cry sequences. We propose a model for Cry toxin oligomerization based on sequence analysis and available mutagenesis data.

Engineering modified Bt toxins to counter insect resistance

The evolution of insect resistance threatens the effectiveness of Bacillus thuringiensis (Bt) toxins that are widely used in sprays and transgenic crops. Resistance to Bt toxins in some insects is linked with mutations that disrupt a toxin-binding cadherin protein. We show that susceptibility to the Bt toxin Cry1Ab was reduced by cadherin gene silencing with RNA interference in Manduca sexta, confirming cadherin's role in Bt toxicity. Native Cry1A toxins required cadherin to form oligomers, but modified Cry1A toxins lacking one alpha-helix did not. The modified toxins killed cadherin-silenced M. sexta and Bt-resistant Pectinophora gossypiella that had cadherin deletion mutations. Our findings suggest that cadherin promotes Bt toxicity by facilitating toxin oligomerization and demonstrate that the modified Bt toxins may be useful against pests resistant to standard Bt toxins.

A membrane associated metalloprotease cleaves Cry3Aa Bacillus thuringiensis toxin reducing pore formation in Colorado potato beetle brush border membrane vesicles

Insect proteases are implicated in Bacillus thuringiensis insecticidal proteins mode of action determining toxin specificity and sensitivity. Few data are available on the involvement of proteases in the later steps of toxicity such as protease interaction with toxin-receptor complexes and the pore formation process. In this study, a Colorado potato beetle (CPB) midgut membrane metalloprotease was found to be involved in the proteolytic processing of Cry3Aa. Interaction of Cry3Aa with BBMV membrane proteases resulted in a distinct pattern of proteolysis. Cleavage was demonstrated to occur in protease accessible regions of domain III and was specifically inhibited by the metalloprotease inhibitors 1,10-phenanthroline and acetohydroxamic acid. Proteolytic inhibition by a peptide representing a segment of proteolysis in domain III and the metalloprotease inhibitor acetohydroxamic acid correlated with increased pore formation, evidencing that Cry3Aa is a specific target of a CPB membrane metalloprotease that degrades potentially active toxin.

Bacillus thuringiensis ssp. israelensis Cyt1Aa enhances activity of Cry11Aa toxin by facilitating the formation of a pre-pore oligomeric structure

Bacillus thuringiensis ssp. israelensis (Bti) has been used worldwide for the control of dipteran insect pests. This bacterium produces several Cry and Cyt toxins that individually show activity against mosquitoes but together show synergistic effect. Previous work demonstrated that Cyt1Aa synergizes the toxic activity of Cry11Aa by functioning as a membrane-bound receptor. In the case of Cry toxins active against lepidopteran insects, receptor interaction triggers the formation of a pre-pore oligomer that is responsible for pore formation and toxicity. In this work we report that binding of Cry11Aa to Cyt1Aa facilitates the formation of a Cry11Aa pre-pore oligomeric structure that is capable of forming pores in membrane vesicles. Cry11Aa and Cyt1A point mutants affected in binding and in synergism had a correlative effect on the formation of Cry11Aa pre-pore oligomer and on pore-formation activity of Cry11Aa. These data further support that Cyt1Aa interacts with Cry11Aa and demonstrate the molecular mechanism by which Cyt1Aa synergizes or suppresses resistance to Cry11Aa, by providing a binding site for Cry11Aa that will result in an efficient formation of Cry11Aa pre-pore that inserts into membranes and forms ionic pores.

Two conformational states of the membrane-associated Bacillus thuringiensis Cry4Ba delta-endotoxin complex revealed by electron crystallography: implications for toxin-pore formation

The insecticidal nature of Cry delta-endotoxins produced by Bacillus thuringiensis is generally believed to be caused by their ability to form lytic pores in the midgut cell membrane of susceptible insect larvae. Here we have analyzed membrane-associated structures of the 65-kDa dipteran-active Cry4Ba toxin by electron crystallography. The membrane-associated toxin complex was crystallized in the presence of DMPC via detergent dialysis. Depending upon the charge of the adsorbed surface, 2D crystals of the oligomeric toxin complex have been captured in two distinct conformations. The projection maps of those crystals have been generated at 17A resolution. Both complexes appeared to be trimeric; as in one crystal form, its projection structure revealed a symmetrical pinwheel-like shape with virtually no depression in the middle of the complex. The other form revealed a propeller-like conformation displaying an obvious hole in the center region, presumably representing the toxin-induced pore. These crystallographic data thus demonstrate for the first time that the 65-kDa activated Cry4Ba toxin in association with lipid membranes could exist in at least two different trimeric conformations, conceivably implying the closed and open states of the pore.

Bacillus thuringiensis Cry1Ab mutants affecting oligomer formation are non-toxic to Manduca sexta larvae

Pore-forming toxins are biological weapons produced by a variety of living organisms, particularly bacteria but also by insects, reptiles, and invertebrates. These proteins affect the cell membrane of their target, disrupting permeability and leading eventually to cell death. The pore-forming toxins typically transform from soluble, monomeric proteins to oligomers that form transmembrane channels. The Cry toxins produced by Bacillus thuringiensis are widely used as insecticides. These proteins have been recognized as pore-forming toxins, and their primary action is to lyse midgut epithelial cells in their target insect. To exert their toxic effect, a prepore oligomeric intermediate is formed leading finally to membrane-inserted oligomeric pores. To understand the role of Cry oligomeric pre-pore formation in the insecticidal activity we isolated point mutations that affected toxin oligomerization but not their binding with the cadherin-like, Bt-R(1) receptor. We show the helix alpha-3 in domain I contains sequences that could form coiled-coil structures important for oligomerization. Some single point mutants in this helix bound Bt-R(1) receptors with similar affinity as the wild-type toxin, but were affected in oligomerization and were severally impaired in pore formation and toxicity against Manduca sexta larvae. These data indicate the pre-pore oligomer and the toxin pore formation play a major role in the intoxication process of Cry1Ab toxin in insect larvae.

A mechanical force contributes to the "osmotic swelling" of brush-border membrane vesicles

Brush-border membrane vesicles and an osmotic swelling assay have been used extensively to monitor the pore-forming activity of Bacillus thuringiensis toxins. After a hypertonic shock, Manduca sexta midgut brush-border membrane vesicles shrink rapidly and reswell partially to a volume that depends on membrane permeability and toxin concentration rather than regaining their original volume as expected from theoretical models. Because efflux of buffer from the vesicles, as they shrink, could contribute to this phenomenon, vesicles were mixed with a hypertonic solution of the buffer with which they were loaded. Under these conditions, they are not expected to reswell, since the same solute is present on both sides of the membrane. Nevertheless, with several buffers, vesicles reswelled readily, an observation that demonstrates the involvement of an additional restoration force. Reswelling also occurred when, in the absence of toxin, the buffers were replaced by glucose, a solute that diffuses readily across the membrane, but did not occur with rat liver microsomes, despite their permeability to glucose. Unexpected swelling was also observed with rabbit jejunum brush-border membrane vesicles, suggesting that the cytoskeleton, present in brush-border membrane vesicles but absent from microsomes, could be responsible for the restoration force.

Pronase digestion of brush border membrane-bound Cry1Aa shows that almost the whole activated Cry1Aa molecule penetrates into the membrane

Bacillus thuringiensis insecticidal proteins, Cry toxins, following ingestion by insect larvae, induce insecticidal effect by penetrating the brush border membranes (BBM) of midgut epithelial cells. Purified, activated B. thuringiensis Cry1Aa bound to Bombyx mori BBMV or unbound Cry1Aa were vigorously digested with Pronase. Both digests were compared by Western blotting. Free Cry1Aa was digested to alpha-helix and/or to amino acids at 1 mg Pronase/mL within 2.4 h at 37 degrees C. Whereas, BBMV-bound Cry1Aa was very resistant to Pronase digestion and even at 2 mg for 24 h, 7.5 kDa and approximately 30 kDa peptide were detected by alpha-2,3 antiserum, and alpha-4,5 and alpha-6,7 antisera, respectively. Another approximately 30 kDa peptide was also detected by beta-6-11 and domain III antisera. These fragments are believed either to be embedded in or to strongly interact with the BBMV. The 7.5 and former approximately 30 kDa peptides are thought to be derived from alpha-2,3 helix and stretch of alpha-4 to alpha-7 helices. Furthermore the latter approximately 30 kDa was thought to include the stretch of beta-6 to domain III. Moreover, the embedded Cry1Aa molecule appears to be segregated in some areas of beta-1-5 sheets, resulting in the above two approximately 30 kDa peptides. From these digestion patterns, we proposed new membrane insertion model for single Cry1Aa molecule. On the other hand, in digestion of BBMV-bound Cry1Aa, 15 kDa peptide which was recognized only by alpha-4,5 antiserum was observed. This fragment must be dimeric alpha-4,5 helices and we discussed the origin of this peptide.

Structure of the functional form of the mosquito larvicidal Cry4Aa toxin from Bacillus thuringiensis at a 2.8-angstrom resolution

The Cry4Aa delta-endotoxin from Bacillus thuringiensis is toxic to larvae of Culex, Anopheles, and Aedes mosquitoes, which are vectors of important human tropical diseases. With the objective of designing modified toxins with improved potency that could be used as biopesticides, we determined the structure of this toxin in its functional form at a resolution of 2.8 angstroms. Like other Cry delta-endotoxins, the activated Cry4Aa toxin consists of three globular domains, a seven-alpha-helix bundle responsible for pore formation (domain I) and the following two other domains having structural similarities with carbohydrate binding proteins: a beta-prism (domain II) and a plant lectin-like beta-sandwich (domain III). We also studied the effect on toxicity of amino acid substitutions and deletions in three loops located at the surface of the putative receptor binding domain II of Cry4Aa. Our results indicate that one loop is an important determinant of toxicity, presumably through attachment of Cry4Aa to the surface of mosquito cells. The availability of the Cry4Aa structure should guide further investigations aimed at the molecular basis of the target specificity and membrane insertion of Cry endotoxins.

Asn183 in α5 is essential for oligomerisation and toxicity of the Bacillus thuringiensis Cry4Ba toxin

The proposed toxicity mechanism of the Bacillus thuringiensis Cry insecticidal proteins involves membrane penetration and lytic pore formation of the alpha4-alpha5 hairpins in the target larval midgut cell membranes. In this study, alanine substitutions of selected polar residues (Tyr(178), Gln(180), Asn(183), Asn(185), and Asn(195)) in the hydrophobic helix-alpha5 of the Cry4Ba mosquito-larvicidal protein were initially conducted via PCR-based directed mutagenesis. Upon IPTG induction, all the 130-kDa mutant protoxins were highly expressed in Escherichia coli as cytoplasmic inclusions, with yields similar to the wild-type protoxin. When E. coli cells expressing each mutant toxin were tested against Stegomyia aegypti mosquito larvae, the larvicidal activity of the N183A mutant was almost completely abolished whereas the four other mutants showed only a small reduction in toxicity. Additionally, replacements of this critical residue with various amino acids revealed that the uncharged polar residue at position 183 in alpha5 is crucial for larvicidal activity. Further characterisation of the N183K bio-inactive mutant revealed that the 65-kDa activated toxin was unable to form oligomers in lipid vesicles and its ability to induce the release of entrapped calcein from liposomes was much weaker than that of the wild-type toxin. These results suggest that the highly conserved Asn(183) located in the middle of the transmembrane alpha5 of Cry4Ba plays a crucial role in toxicity and toxin oligomerisation in the lipid membranes.

Helix 4 mutants of the Bacillus thuringiensis insecticidal toxin Cry1Aa display altered pore-forming abilities

The role played by alpha-helix 4 of the Bacillus thuringiensis toxin Cry1Aa in pore formation was investigated by individually replacing each of its charged residues with either a neutral or an oppositely charged amino acid by using site-directed mutagenesis. The majority of the resulting mutant proteins were considerably less toxic to Manduca sexta larvae than Cry1Aa. Most mutants also had a considerably reduced ability to form pores in midgut brush border membrane vesicles isolated from this insect, with the notable exception of those with alterations at amino acid position 127 (R127N and R127E), located near the N-terminal end of the helix. Introducing a negatively charged amino acid near the C-terminal end of the helix (T142D and T143D), a region normally devoid of charged residues, completely abolished pore formation. For each mutant that retained detectable pore-forming activity, reduced membrane permeability to KCl was accompanied by an approximately equivalent reduction in permeability to N-methyl-D-glucamine hydrochloride, potassium gluconate, sucrose, and raffinose and by a reduced rate of pore formation. These results indicate that the main effect of the mutations was to decrease the toxin's ability to form pores. They provide further evidence that alpha-helix 4 plays a crucial role in the mechanism of pore formation.

Role of toxin activation on binding and pore formation activity of the Bacillus thuringiensis Cry3 toxins in membranes of Leptinotarsa decemlineata (Say)

Binding and pore formation constitute key steps in the mode of action of Bacillus thuringiensis delta-endotoxins. In this work, we present a comparative analysis of toxin-binding capacities of proteolytically processed Cry3A, Cry3B and Cry3C toxins to brush border membranes (BBMV) of the Colorado potato beetle Leptinotarsa decemlineata (CPB), a major potato coleopteran-insect pest. Competition experiments showed that the three Cry3 proteolytically activated toxins share a common binding site. Also heterologous competition experiments showed that Cry3Aa and Cry3Ca toxins have an extra binding site that is not shared with Cry3Ba toxin. The pore formation activity of the three different Cry3 toxins is analysed. High pore-formation activities were observed in Cry3 toxins obtained by proteolytical activation with CPB BBMV in contrast to toxins activated with either trypsin or chymotrypsin proteases. The pore-formation activity correlated with the formation of soluble oligomeric structures. Our data support that, similarly to the Cry1A toxins, the Cry3 oligomer is formed after receptor binding and before membrane insertion, forming a pre-pore structure that is insertion-competent.