Cell surface filaments of the gliding bacterium Flavobacterium johnsoniae revealed by cryo-electron tomography

Unveiling the Molecular Mechanisms of the Type-IX Secretion System's Response Regulator: Structural and Functional Insights

The Type-IX secretion system (T9SS) is a nanomachinery utilized by bacterial pathogens to facilitate infection. The system is regulated by a signaling cascade serving as its activation switch. A pivotal member in this cascade, the response regulator protein PorX, represents a promising drug target to prevent the secretion of virulence factors. Here, we provide a comprehensive characterization of PorX both in vitro and in vivo . First, our structural studies revealed PorX harbours a unique enzymatic effector domain, which, surprisingly, shares structural similarities with the alkaline phosphatase superfamily, involved in nucleotide and lipid signaling pathways. Importantly, such pathways have not been associated with the T9SS until now. Enzymatic characterization of PorX's effector domain revealed a zinc-dependent phosphodiesterase activity, with active site dimensions suitable to accommodate a large substrate. Unlike typical response regulators that dimerize via their receiver domain upon phosphorylation, we found that zinc can also induce conformational changes and promote PorX's dimerization via an unexpected interface. These findings suggest that PorX can serve as a cellular zinc sensor, broadening our understanding of its regulatory mechanisms. Despite the strict conservation of PorX in T9SS-utilizing bacteria, we demonstrate that PorX is essential for virulence factors secretion in Porphyromonas gingivalis and affects metabolic enzymes secretion in the non-pathogenic Flavobacterium johnsoniae , but not for the secretion of gliding adhesins. Overall, this study advances our structural and functional understanding of PorX, highlighting its potential as a druggable target for intervention strategies aimed at disrupting the T9SS and mitigating virulence in pathogenic species.

Structural insights into the mechanism of protein transport by the Type 9 Secretion System translocon

Secretion systems are protein export machines that enable bacteria to exploit their environment through the release of protein effectors. The Type 9 Secretion System (T9SS) is responsible for protein export across the outer membrane (OM) of bacteria of the phylum Bacteroidota. Here we trap the T9SS of Flavobacterium johnsoniae in the process of substrate transport by disrupting the T9SS motor complex. Cryo-EM analysis of purified substrate-bound T9SS translocons reveals an extended translocon structure in which the previously described translocon core is augmented by a periplasmic structure incorporating the proteins SprE, PorD and a homologue of the canonical periplasmic chaperone Skp. Substrate proteins bind to the extracellular loops of a carrier protein within the translocon pore. As transport intermediates accumulate on the translocon when energetic input is removed, we deduce that release of the substrate-carrier protein complex from the translocon is the energy-requiring step in T9SS transport.

Isolation and Visualization of Gliding Motility Machinery in Bacteroidota

Many members of the phylum Bacteroidota (formerly called Bacteroidetes) adhere to and move on solid surfaces. This type of bacterial motility is called gliding and does not involve the conventional bacterial motility machinery, such as flagella and pili. To understand the mechanism of gliding motility of some Bacteroidota bacteria such as a soil bacterium Flavobacterium johnsoniae and a marine bacterium Saprospira grandis, the gliding motility machines of these two bacteria have been analyzed by electron microscopy with negative staining. Here, we describe methods to directly observe the gliding motility machinery in Bacteroidota by transmission electron microscopy.

Live Cell Imaging of Gliding Motility of Flavobacterium johnsoniae Under High-Resolution Microscopy

Many phylum Bacteroidetes bacteria are motile without either flagella or pili. These cells move on surfaces such as glass or agar, and a motor generates a propulsion force for the cells via a proton motive force across the cytoplasmic membrane. The gliding motility depends on the helical track of cell adhesin along the longer axis of the cell body. Here, we describe live-cell imaging of gliding motility under optical microscopy, as well as an immunofluorescent labeling method for visualizing helical trajectories.

Filamentous structures in the cell envelope are associated with bacteroidetes gliding machinery

Many bacteria belonging to the phylum Bacteroidetes move on solid surfaces, called gliding motility. In our previous study with the Bacteroidetes gliding bacterium Flavobacterium johnsoniae, we proposed a helical loop track model, where adhesive SprB filaments are propelled along a helical loop on the cell surface. In this study, we observed the gliding cell rotating counterclockwise about its axis when viewed from the rear to the advancing direction of the cell and revealed that one labeled SprB focus sometimes overtook and passed another SprB focus that was moving in the same direction. Several electron microscopic analyses revealed the presence of a possible multi-rail structure underneath the outer membrane, which was associated with SprB filaments and contained GldJ protein. These results provide insights into the mechanism of Bacteroidetes gliding motility, in which the SprB filaments are propelled along tracks that may form a multi-rail system underneath the outer membrane. The insights may give clues as to how the SprB filaments get their driving force.

Dynamic proton-dependent motors power type IX secretion and gliding motility in Flavobacterium

Motile bacteria usually rely on external apparatus like flagella for swimming or pili for twitching. By contrast, gliding bacteria do not rely on obvious surface appendages to move on solid surfaces. Flavobacterium johnsoniae and other bacteria in the Bacteroidetes phylum use adhesins whose movement on the cell surface supports motility. In F. johnsoniae, secretion and helicoidal motion of the main adhesin SprB are intimately linked and depend on the type IX secretion system (T9SS). Both processes necessitate the proton motive force (PMF), which is thought to fuel a molecular motor that comprises the GldL and GldM cytoplasmic membrane proteins. Here, we show that F. johnsoniae gliding motility is powered by the pH gradient component of the PMF. We further delineate the interaction network between the GldLM transmembrane helices (TMHs) and show that conserved glutamate residues in GldL TMH2 are essential for gliding motility, although having distinct roles in SprB secretion and motion. We then demonstrate that the PMF and GldL trigger conformational changes in the GldM periplasmic domain. We finally show that multiple GldLM complexes are distributed in the membrane, suggesting that a network of motors may be present to move SprB along a helical path on the cell surface. Altogether, our results provide evidence that GldL and GldM assemble dynamic membrane channels that use the proton gradient to power both T9SS-dependent secretion of SprB and its motion at the cell surface.

Large-Scale Vortices with Dynamic Rotation Emerged from Monolayer Collective Motion of Gliding Flavobacteria

A collective motion of self-driven particles has been a fascinating subject in physics and biology. Sophisticated macroscopic behavior emerges through a population of thousands or millions of bacterial cells propelling itself by flagellar rotation and chemotactic responses. Here, we found a series of collective motions accompanying successive phase transitions for a nonflagellated rod-shaped soil bacterium, Flavobacterium johnsoniae, which was driven by a surface cell movement known as gliding motility. When we spotted the cells on an agar plate with a low level of nutrients, the bacterial community exhibited vortex patterns that spontaneously appeared as lattice and integrated into a large-scale circular plate. All patterns were exhibited with a monolayer of bacteria, which enabled us to two-dimensionally visualize an individual cell with high resolution within a wide-range pattern. The single cells moved with random orientation, but the cells that were connected with one another showed left-turn-biased trajectories in a starved environment. This feature is possibly due to the collision of cells inducing a nematic alignment of dense cells as self-propelled rods. Subsequently, each vortex oscillated independently and then transformed to the rotating mode as an independent circular plate. Notably, the rotational direction of the circular plate was counterclockwise without exception. The plates developed accompanying rotation with constant angular velocity, suggesting that the mode is an efficient strategy for bacterial survival. IMPORTANCE Self-propelled bacteria propelled by flagellar rotation often display highly organized dynamic patterns at high cell densities. Here, we found a new mode of collective motion in nonflagellated bacteria; vortex patterns spontaneously appeared as lattice and were integrated into a large-scale circular plate, comprising hundreds of thousands of cells, which exhibited unidirectional rotation in a counterclockwise manner and expanded in size on agar. A series of collective motions was driven by gliding motility of the rod-shaped soil bacterium Flavobacterium johnsoniae. In a low-nutrient environment, single cells moved with random orientation, while cells at high density moved together as a unitary cluster. This might be an efficient strategy for cells of this species to find nutrients.

Identification of the Flavobacterium johnsoniae cysteate-fatty acyl transferase required for capnine synthesis and for efficient gliding motility

Sulfonolipids (SLs) are bacterial lipids that are structurally related to sphingolipids. Synthesis of this group of lipids seems to be mainly restricted to Flavobacterium, Cytophaga and other members of the phylum Bacteroidetes. These lipids have a wide range of biological activities: they can induce multicellularity in choanoflagellates, act as von Willebrand factor receptor antagonists, inhibit DNA polymerase, or function as tumour suppressing agents. In Flavobacterium johnsoniae, their presence seems to be required for efficient gliding motility. Until now, no genes/enzymes involved in SL synthesis have been identified, which has been limiting for the study of some of the biological effects these lipids have. Here, we describe the identification of the cysteate-fatty acyl transferase Fjoh_2419 required for synthesis of the SL precursor capnine in F. johnsoniae. This enzyme belongs to the α-oxoamine synthase family similar to serine palmitoyl transferases, 2-amino-3-oxobutyrate coenzyme A ligase and 8-amino-7-oxononanoate synthases. Expression of the gene fjoh_2419 in Escherichia coli caused the formation of a capnine-derived molecule. Flavobacterium johnsoniae mutants deficient in fjoh_2419 lacked SLs and were more sensitive to many antibiotics. Mutant growth was not affected in liquid medium but the cells exhibited defects in gliding motility.

Biofilm Spreading by the Adhesin-Dependent Gliding Motility of Flavobacterium johnsoniae. 1. Internal Structure of the Biofilm

The Gram-negative bacterium Flavobacterium johnsoniae employs gliding motility to move rapidly over solid surfaces. Gliding involves the movement of the adhesin SprB along the cell surface. F. johnsoniae spreads on nutrient-poor 1% agar-PY2, forming a thin film-like colony. We used electron microscopy and time-lapse fluorescence microscopy to investigate the structure of colonies formed by wild-type (WT) F. johnsoniae and by the sprB mutant (ΔsprB). In both cases, the bacteria were buried in the extracellular polymeric matrix (EPM) covering the top of the colony. In the spreading WT colonies, the EPM included a thick fiber framework and vesicles, revealing the formation of a biofilm, which is probably required for the spreading movement. Specific paths that were followed by bacterial clusters were observed at the leading edge of colonies, and abundant vesicle secretion and subsequent matrix formation were suggested. EPM-free channels were formed in upward biofilm protrusions, probably for cell migration. In the nonspreading ΔsprB colonies, cells were tightly packed in layers and the intercellular space was occupied by less matrix, indicating immature biofilm. This result suggests that SprB is not necessary for biofilm formation. We conclude that F. johnsoniae cells use gliding motility to spread and maturate biofilms.

Structure and mechanism of the proton-driven motor that powers type 9 secretion and gliding motility

Three classes of ion-driven protein motors have been identified to date: ATP synthase, the bacterial flagellar motor and a proton-driven motor that powers gliding motility and the type 9 protein secretion system in Bacteroidetes bacteria. Here, we present cryo-electron microscopy structures of the gliding motility/type 9 protein secretion system motors GldLM from Flavobacterium johnsoniae and PorLM from Porphyromonas gingivalis. The motor is an asymmetric inner membrane protein complex in which the single transmembrane helices of two periplasm-spanning GldM/PorM proteins are positioned inside a ring of five GldL/PorL proteins. Mutagenesis and single-molecule tracking identify protonatable amino acid residues in the transmembrane domain of the complex that are important for motor function. Our data provide evidence for a mechanism in which proton flow results in rotation of the periplasm-spanning GldM/PorM dimer inside the intra-membrane GldL/PorL ring to drive processes at the bacterial outer membrane.

Biopearling of Interconnected Outer Membrane Vesicle Chains by a Marine Flavobacterium

Large surface-to-volume ratios provide optimal nutrient uptake conditions for small microorganisms in oligotrophic habitats. The surface area can be increased with appendages. Here, we describe chains of interconnecting vesicles protruding from cells of strain Hel3_A1_48, affiliating with Formosa spp. within the Flavobacteriia and originating from coastal free-living bacterioplankton. The chains were up to 10 μm long and had vesicles emanating from the outer membrane with a single membrane and a size of 80 to 100 nm by 50 to 80 nm. Cells extruded membrane tubes in the exponential phase, whereas vesicle chains dominated on cells in the stationary growth phase. This formation is known as pearling, a physical morphogenic process in which membrane tubes protrude from liposomes and transform into chains of interconnected vesicles. Proteomes of whole-cell membranes and of detached vesicles were dominated by outer membrane proteins, including the type IX secretion system and surface-attached peptidases, glycoside hydrolases, and endonucleases. Fluorescein-labeled laminarin stained the cells and the vesicle chains. Thus, the appendages provide binding domains and degradative enzymes on their surfaces and probably storage volume in the vesicle lumen. Both may contribute to the high abundance of these Formosa-affiliated bacteria during laminarin utilization shortly after spring algal blooms.IMPORTANCE Microorganisms produce membrane vesicles. One synthesis pathway seems to be pearling that describes the physical formation of vesicle chains from phospholipid vesicles via extended tubes. Bacteria with vesicle chains had been observed as well as bacteria with tubes, but pearling was so far not observed. Here, we report the observation of, initially, tubes and then vesicle chains during the growth of a flavobacterium, suggesting biopearling of vesicle chains. The flavobacterium is abundant during spring bacterioplankton blooms developing after algal blooms and has a special set of enzymes for laminarin, the major storage polysaccharide of microalgae. We demonstrated with fluorescently labeled laminarin that the vesicle chains bind laminarin or contain laminarin-derived compounds. Proteomic analyses revealed surface-attached degradative enzymes on the outer membrane vesicles. We conclude that the large surface area and the lumen of vesicle chains may contribute to the ecological success of this marine bacterium.

The Carboxy-Terminal Region of Flavobacterium johnsoniae SprB Facilitates Its Secretion by the Type IX Secretion System and Propulsion by the Gliding Motility Machinery

Flavobacterium johnsoniae SprB moves rapidly along the cell surface, resulting in gliding motility. SprB secretion requires the type IX secretion system (T9SS). Proteins secreted by the T9SS typically have conserved C-terminal domains (CTDs) belonging to the type A CTD or type B CTD family. Attachment of 70- to 100-amino-acid type A CTDs to a foreign protein allows its secretion. Type B CTDs are common but have received little attention. Secretion of the foreign protein superfolder green fluorescent protein (sfGFP) fused to regions spanning the SprB type B CTD (sfGFP-CTD_SprB) was analyzed. CTDs of 218 amino acids or longer resulted in secretion of sfGFP, whereas a 149-amino-acid region did not. Some sfGFP was secreted in soluble form, whereas the rest was attached on the cell surface. Surface-attached sfGFP was rapidly propelled along the cell, suggesting productive interaction with the motility machinery. This did not result in rapid cell movement, which apparently requires additional regions of SprB. Secretion of sfGFP-CTD_SprB required coexpression with sprF, which lies downstream of sprB SprF is similar in sequence to Porphyromonas gingivalis PorP. Most F. johnsoniae genes encoding proteins with type B CTDs lie immediately upstream of porP/sprF-like genes. sfGFP was fused to the type B CTD from one such protein (Fjoh_3952). This resulted in secretion of sfGFP only when it was coexpressed with its cognate PorP/SprF-like protein. These results highlight the need for extended regions of type B CTDs and for coexpression with the appropriate PorP/SprF-like protein for efficient secretion and cell surface localization of cargo proteins.IMPORTANCE The F. johnsoniae gliding motility adhesin SprB is delivered to the cell surface by the type IX secretion system (T9SS) and is rapidly propelled along the cell by the motility machinery. How this 6,497-amino-acid protein interacts with the secretion and motility machines is not known. Fusion of the C-terminal 218 amino acids of SprB to a foreign cargo protein resulted in its secretion, attachment to the cell surface, and rapid movement by the motility machinery. Efficient secretion of SprB required coexpression with the outer membrane protein SprF. Secreted proteins that have sequence similarity to SprB in their C-terminal regions are common in the phylum Bacteroidetes and may have roles in adhesion, motility, and virulence.

Type 9 secretion system structures reveal a new protein transport mechanism

The type 9 secretion system (T9SS) is the protein export pathway of bacteria of the Gram-negative Fibrobacteres-Chlorobi-Bacteroidetes superphylum and is an essential determinant of pathogenicity in severe periodontal disease. The central element of the T9SS is a so-far uncharacterized protein-conducting translocon located in the bacterial outer membrane. Here, using cryo-electron microscopy, we provide structural evidence that the translocon is the T9SS protein SprA. SprA forms an extremely large (36-strand) single polypeptide transmembrane β-barrel. The barrel pore is capped on the extracellular end, but has a lateral opening to the external membrane surface. Structures of SprA bound to different components of the T9SS show that partner proteins control access to the lateral opening and to the periplasmic end of the pore. Our results identify a protein transporter with a distinctive architecture that uses an alternating access mechanism in which the two ends of the protein-conducting channel are open at different times.

CryoEM of bacterial secretion systems

The need for bacteria to interact with their environment has driven the evolution of elaborate secretion systems. By virtue of their function, secretion systems are macromolecular complexes associated with the cell envelope and therefore inherently difficult to study by conventional structural biology techniques. Cryo-electron microscopy (cryoEM) has become an invaluable technique to study large membrane-embedded complexes and led to major advances in the mechanistic understanding of secretion systems. CryoEM comprises of two main modalities, namely single particle analysis and tomography. Here, we review how detailed structures retrieved by single particle analysis combine elegantly with tomography experiments in which the secretion systems are observed in their native cellular context.

Novel Method Reveals a Narrow Phylogenetic Distribution of Bacterial Dispersers in Environmental Communities Exposed to Low-Hydration Conditions

In this study, we developed a method that provides profiles of community-level surface dispersal from environmental samples under controlled hydration conditions and enables us to isolate and uncover the diversity of the fastest bacterial dispersers. The method expands on the porous surface model (PSM), previously used to monitor the dispersal of individual bacterial strains in liquid films at the surface of a porous ceramic disc. The novel procedure targets complex communities and captures the dispersed bacteria on a solid medium for growth and detection. The method was first validated by distinguishing motile Pseudomonas putida and Flavobacterium johnsoniae strains from their nonmotile mutants. Applying the method to soil and lake water bacterial communities showed that community-scale dispersal declined as conditions became drier. However, for both communities, dispersal was detected even under low-hydration conditions (matric potential, -3.1 kPa) previously proven too dry for P. putida strain KT2440 motility. We were then able to specifically recover and characterize the fastest dispersers from the inoculated communities. For both soil and lake samples, 16S rRNA gene amplicon sequencing revealed that the fastest dispersers were substantially less diverse than the total communities. The dispersing fraction of the soil microbial community was dominated by Pseudomonas species cells, which increased in abundance under low-hydration conditions, while the dispersing fraction of the lake community was dominated by Aeromonas species cells and, under wet conditions (-0.5 kPa), also by Exiguobacterium species cells. The results gained in this study bring us a step closer to assessing the dispersal ability within complex communities under environmentally relevant conditions.IMPORTANCE Dispersal is a key process of bacterial community assembly, and yet, very few attempts have been made to assess bacterial dispersal at the community level, as the focus has previously been on pure-culture studies. A crucial factor for dispersal in habitats where hydration conditions vary, such as soils, is the thickness of the liquid films surrounding solid surfaces, but little is known about how the ability to disperse in such films varies within bacterial communities. Therefore, we developed a method to profile community dispersal and identify fast dispersers on a rough surface resembling soil surfaces. Our results suggest that within the motile fraction of a bacterial community, only a minority of the bacterial types are able to disperse in the thinnest liquid films. During dry periods, these efficient dispersers can gain a significant fitness advantage through their ability to colonize new habitats ahead of the rest of the community.

Untangling Flavobacterium johnsoniae Gliding Motility and Protein Secretion

Flavobacterium johnsoniae exhibits rapid gliding motility over surfaces. At least 20 genes are involved in this process. Seven of these, gldK, gldL, gldM, gldN, sprA, sprE, and sprT, encode proteins of the type IX protein secretion system (T9SS). The T9SS is required for surface localization of the motility adhesins SprB and RemA, and for secretion of the soluble chitinase ChiA. Here, we demonstrate that the gliding motility proteins GldA, GldB, GldD, GldF, GldH, GldI, and GldJ are also essential for secretion. Cells with mutations in the genes encoding any of these seven proteins had normal levels of gldK mRNA but dramatically reduced levels of the GldK protein, which may explain the secretion defects of the motility mutants. GldJ is necessary for stable accumulation of GldK, and each mutant lacked the GldJ protein. F. johnsoniae cells that produced truncated GldJ, lacking eight to 13 amino acids from the C terminus, accumulated GldK but were deficient in gliding motility. SprB was secreted by these cells but was not propelled along their surfaces. This C-terminal region of GldJ is thus required for gliding motility but not for secretion. The identification of mutants that are defective for motility but competent for secretion begins to untangle the F. johnsoniae gliding motility machinery from the T9SS.IMPORTANCE Many members of the phylum Bacteroidetes secrete proteins using T9SSs. T9SSs appear to be confined to members of this phylum. Many of these bacteria also glide rapidly over surfaces using a motility machine that is also confined to the Bacteroidetes and appears to be intertwined with the T9SS. This study identifies F. johnsoniae proteins that are required for both T9SS function and gliding motility. It also provides an explanation for the link between secretion and gliding and identifies mutants with defects in motility but not secretion.

More Than Gliding: Involvement of GldD and GldG in the Virulence of Flavobacterium psychrophilum

A fascinating characteristic of most members of the genus Flavobacterium is their ability to move over surfaces by gliding motility. Flavobacterium psychrophilum, an important pathogen of farmed salmonids worldwide, contains in its genome the 19 gld and spr genes shown to be required for gliding or spreading in Flavobacterium johnsoniae; however, their relative role in its lifestyle remains unknown. In order to address this issue, two spreading deficient mutants were produced as part of a Tn4351 mutant library in F. psychrophilum strain THCO2-90. The transposons were inserted in gldD and gldG genes. While the wild-type strain is proficient in adhesion, biofilm formation and displays strong proteolytic activity, both mutants lost these characteristics. Extracellular proteome comparisons revealed important modifications for both mutants, with a significant reduction of the amounts of proteins likely transported through the outer membrane by the Type IX secretion system, indicating that GldD and GldG proteins are required for an effective activity of this system. In addition, a significant decrease in virulence was observed using rainbow trout bath and injection infection models. Our results reveal additional roles of gldD and gldG genes that are likely of importance for the F. psychrophilum lifestyle, including virulence.

Diverse C-Terminal Sequences Involved in Flavobacterium johnsoniae Protein Secretion

Flavobacteriumjohnsoniae and many related bacteria secrete proteins across the outer membrane using the type IX secretion system (T9SS). Proteins secreted by T9SSs have amino-terminal signal peptides for export across the cytoplasmic membrane by the Sec system and carboxy-terminal domains (CTDs) targeting them for secretion across the outer membrane by the T9SS. Most but not all T9SS CTDs belong to the family TIGR04183 (type A CTDs). We functionally characterized diverse CTDs for secretion by the F. johnsoniae T9SS. Attachment of the CTDs from F. johnsoniae RemA, AmyB, and ChiA to the foreign superfolder green fluorescent protein (sfGFP) that had a signal peptide at the amino terminus resulted in secretion across the outer membrane. In each case, approximately 80 to 100 amino acids from the extreme carboxy termini were needed for efficient secretion. Several type A CTDs from distantly related members of the phylum Bacteroidetes functioned in F. johnsoniae, supporting the secretion of sfGFP by the F. johnsoniae T9SS. F. johnsoniae SprB requires the T9SS for secretion but lacks a type A CTD. It has a conserved C-terminal domain belonging to the family TIGR04131, which we refer to as a type B CTD. The CTD of SprB was required for its secretion, but attachment of C-terminal regions of SprB of up to 1,182 amino acids to sfGFP failed to result in secretion. Additional features outside the C-terminal region of SprB may be required for its secretion.IMPORTANCE Type IX protein secretion systems (T9SSs) are common in but limited to members of the phylum Bacteroidetes Most proteins that are secreted by T9SSs have conserved carboxy-terminal domains that belong to the protein domain family TIGR04183 (type A CTDs) or TIGR04131 (type B CTDs). Here, we identify features of T9SS CTDs of F. johnsoniae that are required for protein secretion and demonstrate that type A CTDs from distantly related members of the phylum function with the F. johnsoniae T9SS to secrete the foreign protein sfGFP. In contrast, type B CTDs failed to target sfGFP for secretion, suggesting a more complex association with the T9SS.

Novel mechanisms power bacterial gliding motility

For many bacteria, motility is essential for survival, growth, virulence, biofilm formation and intra/interspecies interactions. Since natural environments differ, bacteria have evolved remarkable motility systems to adapt, including swimming in aqueous media, and swarming, twitching and gliding on solid and semi-solid surfaces. Although tremendous advances have been achieved in understanding swimming and swarming motilities powered by flagella, and twitching motility powered by Type IV pili, little is known about gliding motility. Bacterial gliders are a heterogeneous group containing diverse bacteria that utilize surface motilities that do not depend on traditional flagella or pili, but are powered by mechanisms that are less well understood. Recently, advances in our understanding of the molecular machineries for several gliding bacteria revealed the roles of modified ion channels, secretion systems and unique machinery for surface movements. These novel mechanisms provide rich source materials for studying the function and evolution of complex microbial nanomachines. In this review, we summarize recent findings made on the gliding mechanisms of the myxobacteria, flavobacteria and mycoplasmas.

A new view into prokaryotic cell biology from electron cryotomography

Electron cryotomography (ECT) enables intact cells to be visualized in 3D in an essentially native state to 'macromolecular' (∼4 nm) resolution, revealing the basic architectures of complete nanomachines and their arrangements in situ. Since its inception, ECT has advanced our understanding of many aspects of prokaryotic cell biology, from morphogenesis to subcellular compartmentalization and from metabolism to complex interspecies interactions. In this Review, we highlight how ECT has provided structural and mechanistic insights into the physiology of bacteria and archaea and discuss prospects for the future.

Minicells, Back in Fashion

Cryo-electron tomography (cryo-ET) has emerged as a leading technique for three-dimensional visualization of large macromolecular complexes and their conformational changes in their native cellular environment. However, the resolution and potential applications of cryo-ET are fundamentally limited by specimen thickness, preventing high-resolution in situ visualization of macromolecular structures in many bacteria (such as Escherichia coli and Salmonella enterica). Minicells, which were discovered nearly 50 years ago, have recently been exploited as model systems to visualize molecular machines in situ, due to their smaller size and other unique properties. In this review, we discuss strategies for producing minicells and highlight their use in the study of chemotactic signaling, protein secretion, and DNA translocation. In combination with powerful genetic tools and advanced imaging techniques, minicells provide a springboard for in-depth structural studies of bacterial macromolecular complexes in situ and therefore offer a unique approach for gaining novel structural insights into many important processes in microbiology.

A polysaccharide utilization locus from Flavobacterium johnsoniae enables conversion of recalcitrant chitin

BACKGROUND

Chitin is the second most abundant polysaccharide on earth and as such a great target for bioconversion applications. The phylum Bacteroidetes is one of nature's most ubiquitous bacterial lineages and is essential in the global carbon cycle with many members being highly efficient degraders of complex carbohydrates. However, despite their specialist reputation in carbohydrate conversion, mechanisms for degrading recalcitrant crystalline polysaccharides such as chitin and cellulose are hitherto unknown.

RESULTS

Here we describe a complete functional analysis of a novel polysaccharide utilization locus (PUL) in the soil Bacteroidete Flavobacterium johnsoniae, tailored for conversion of chitin. The F. johnsoniae chitin utilization locus (ChiUL) consists of eleven contiguous genes encoding carbohydrate capture and transport proteins, enzymes, and a two-component sensor-regulator system. The key chitinase (ChiA) encoded by ChiUL is atypical in terms of known Bacteroidetes-affiliated PUL mechanisms as it is not anchored to the outer cell membrane and consists of multiple catalytic domains. We demonstrate how the extraordinary hydrolytic efficiency of ChiA derives from synergy between its multiple chitinolytic (endo- and exo-acting) and previously unidentified chitin-binding domains. Reverse genetics show that ChiA and PUL-encoded proteins involved in sugar binding, import, and chitin sensing are essential for efficient chitin utilization. Surprisingly, the ChiUL encodes two pairs of SusC/D-like outer membrane proteins. Ligand-binding and structural studies revealed functional differences between the two SusD-like proteins that enhance scavenging of chitin from the environment. The combined results from this study provide insight into the mechanisms employed by Bacteroidetes to degrade recalcitrant polysaccharides and reveal important novel aspects of the PUL paradigm.

CONCLUSIONS

By combining reverse genetics to map essential PUL genes, structural studies on outer membrane chitin-binding proteins, and enzymology, we provide insight into the mechanisms employed by Bacteroidetes to degrade recalcitrant polysaccharides and introduce a new saccharolytic mechanism used by the phylum Bacteroidetes. The presented discovery and analysis of the ChiUL will greatly benefit future enzyme discovery efforts as well as studies regarding enzymatic intramolecular synergism.

Towards a model for Flavobacterium gliding

Cells of Flavobacterium johnsoniae, a rod-shaped bacterium about 6 μm long, do not have flagella or pili, yet they move over surfaces at speeds of about 2 μm/s. This motion is called gliding. Recent advances in F. johnsoniae research include the discovery of mobile cell-surface adhesins and rotary motors. The puzzle is how rotary motion leads to linear motion. We suggest a possible mechanism, inspired by the snowmobile.

A new locus in Cytophaga hutchinsonii involved in colony spreading on agar surfaces and individual cell gliding

Cytophaga hutchinsonii glides rapidly over surfaces by an unknown mechanism without flagella and type IV pili and it can degrade crystalline cellulose efficiently by a novel mechanism. Tn4351 transposon mutagenesis was used to identify a new gene, CHU_1798, essential for colony spreading on agar surfaces. Further study showed that disruption of CHU_1798 caused non-spreading colonies on both soft and hard agar surfaces and individual cells were partially deficient in gliding on glass surfaces. The CHU_1798 mutant could digest cellulose as long as the cells were in direct contact with the cellulose, but it could not degrade cellulose powder buried in the agar plate. Scanning electron microscopy showed that individual mutant cells arranged irregularly on the cellulose fiber surface at an early stage of incubation, but later showed a regular parallel arrangement when there were plenty of cells and could spread along the cellulose fibers. These results suggest that CHU_1798 plays an important role in the motility of C. hutchinsonii and provide insight into the relation between cell motility and cellulose degradation.

A rotary motor drives Flavobacterium gliding

Cells of Flavobacterium johnsoniae, a rod-shaped bacterium devoid of pili or flagella, glide over glass at speeds of 2-4 μm/s [1]. Gliding is powered by a protonmotive force [2], but the machinery required for this motion is not known. Usually, cells move along straight paths, but sometimes they exhibit a reciprocal motion, attach near one pole and flip end over end, or rotate. This behavior is similar to that of a Cytophaga species described earlier [3]. Development of genetic tools for F. johnsoniae led to discovery of proteins involved in gliding [4]. These include the surface adhesin SprB that forms filaments about 160 nm long by 6 nm in diameter, which, when labeled with a fluorescent antibody [2] or a latex bead [5], are seen to move longitudinally down the length of a cell, occasionally shifting positions to the right or the left. Evidently, interaction of these filaments with a surface produces gliding. To learn more about the gliding motor, we sheared cells to reduce the number and size of SprB filaments and tethered cells to glass by adding anti-SprB antibody. Cells spun about fixed points, mostly counterclockwise, rotating at speeds of 1 Hz or more. The torques required to sustain such speeds were large, comparable to those generated by the flagellar rotary motor. However, we found that a gliding motor runs at constant speed rather than at constant torque. Now, there are three rotary motors powered by protonmotive force: the bacterial flagellar motor, the Fo ATP synthase, and the gliding motor.

Flavobacterium johnsoniae PorV is required for secretion of a subset of proteins targeted to the type IX secretion system

Flavobacterium johnsoniae exhibits gliding motility and digests many polysaccharides, including chitin. A novel protein secretion system, the type IX secretion system (T9SS), is required for gliding and chitin utilization. The T9SS secretes the cell surface motility adhesins SprB and RemA and the chitinase ChiA. Proteins involved in secretion by the T9SS include GldK, GldL, GldM, GldN, SprA, SprE, and SprT. Porphyromonas gingivalis has orthologs for each of these that are required for secretion of gingipain protease virulence factors by its T9SS. P. gingivalis porU and porV have also been linked to T9SS-mediated secretion, and F. johnsoniae has orthologs of these. Mutations in F. johnsoniae porU and porV were constructed to determine if they function in secretion. Cells of a porV deletion mutant were deficient in chitin utilization and failed to secrete ChiA. They were also deficient in secretion of the motility adhesin RemA but retained the ability to secrete SprB. SprB is involved in gliding motility and is needed for formation of spreading colonies on agar, and the porV mutant exhibited gliding motility and formed spreading colonies. However, the porV mutant was partially deficient in attachment to glass, apparently because of the absence of RemA and other adhesins on the cell surface. The porV mutant also appeared to be deficient in secretion of numerous other proteins that have carboxy-terminal domains associated with targeting to the T9SS. PorU was not required for secretion of ChiA, RemA, or SprB, indicating that it does not play an essential role in the F. johnsoniae T9SS.

Comparing the different morphotypes of a fish pathogen--implications for key virulence factors in Flavobacterium columnare

Background

Flavobacterium columnare (Bacteroidetes) is the causative agent of columnaris disease in farmed freshwater fish around the world. The bacterium forms three colony morphotypes (Rhizoid, Rough and Soft), but the differences of the morphotypes are poorly known. We studied the virulence of the morphotypes produced by F. columnare strain B067 in rainbow trout (Onconrhynchus mykiss) and used high-resolution scanning electron microscopy to identify the fine structures of the cells grown in liquid and on agar. We also analysed the proteins secreted extracellularly and in membrane vesicles to identify possible virulence factors.

Results

Only the Rhizoid morphotype was virulent in rainbow trout. Under electron microscopy, the cells of Rhizoid and Soft morphotypes were observed to display an organised structure within the colony, whereas in the Rough type this internal organisation was absent. Planktonic cells of the Rhizoid and Rough morphotypes produced large membrane vesicles that were not seen on the cells of the Soft morphotype. The vesicles were purified and analysed. Two proteins with predicted functions were identified, OmpA and SprF. Furthermore, the Rhizoid morphotype secreted a notable amount of a small, unidentified 13 kDa protein absent in the Rough and Soft morphotypes, indicating an association with bacterial virulence.

Conclusions

Our results suggest three factors that are associated with the virulence of F. columnare: the coordinated organisation of cells, a secreted protein and outer membrane vesicles. The internal organisation of the cells within a colony may be associated with bacterial gliding motility, which has been suggested to be connected with virulence in F. columnare. The function of the secreted 13 kDa protein by the cells of the virulent morphotype cells remains unknown. The membrane vesicles might be connected with the adhesion of cells to the surfaces and could also carry potential virulence factors. Indeed, OmpA is a virulence factor in several bacterial pathogens, often linked with adhesion and invasion, and SprF is a protein connected with gliding motility and the protein secretion of flavobacteria.

Flavobacterium johnsoniae chitinase ChiA is required for chitin utilization and is secreted by the type IX secretion system

Flavobacterium johnsoniae, a member of phylum Bacteriodetes, is a gliding bacterium that digests insoluble chitin and many other polysaccharides. A novel protein secretion system, the type IX secretion system (T9SS), is required for gliding motility and for chitin utilization. Five potential chitinases were identified by genome analysis. Fjoh_4555 (ChiA), a 168.9-kDa protein with two glycoside hydrolase family 18 (GH18) domains, was targeted for analysis. Disruption of chiA by insertional mutagenesis resulted in cells that failed to digest chitin, and complementation with wild-type chiA on a plasmid restored chitin utilization. Antiserum raised against recombinant ChiA was used to detect the protein and to characterize its secretion by F. johnsoniae. ChiA was secreted in soluble form by wild-type cells but remained cell associated in strains carrying mutations in any of the T9SS genes, gldK, gldL, gldM, gldNO, sprA, sprE, and sprT. Western blot and liquid chromatography-tandem mass spectrometry (LC-MS/MS) analyses suggested that ChiA was proteolytically processed into two GH18 domain-containing proteins. Proteins secreted by T9SSs typically have conserved carboxy-terminal domains (CTDs) belonging to the TIGRFAM families TIGR04131 and TIGR04183. ChiA does not exhibit strong similarity to these sequences and instead has a novel CTD. Deletion of this CTD resulted in accumulation of ChiA inside cells. Fusion of the ChiA CTD to recombinant mCherry resulted in secretion of mCherry into the medium. The results indicate that ChiA is a soluble extracellular chitinase required for chitin utilization and that it relies on a novel CTD for secretion by the F. johnsoniae T9SS.

Bidirectional bacterial gliding motility powered by the collective transport of cell surface proteins

The gliding motility of Flavobacterium johnsoniae is driven by moving surface adhesive proteins. Recently, these motility components were observed to travel along a closed loop on the cell surface. The mechanism by which such moving surface adhesins give rise to cell motion remains unknown. On the basis of the unique motility properties of F. johnsoniae, we present a generic model for bidirectional motion of rigidly coupled adhesins, which are propelled in opposite directions. Using analytical and numerical methods, we demonstrate that, for a sufficiently large adhesin speed, bidirectional motion arises from spontaneous symmetry breaking. The model also predicts that, close to the bifurcation point, a weak asymmetry in the binding dynamics is sufficient to facilitate directed motility, indicating that the direction of motion could be sensitively regulated internally in response to inhomogeneity of the environment.

Helical flow of surface protein required for bacterial gliding motility

Cells of Flavobacterium johnsoniae and of many other members of the phylum Bacteroidetes exhibit rapid gliding motility over surfaces by a unique mechanism. These cells do not have flagella or pili; instead, they rely on a novel motility apparatus composed of Gld and Spr proteins. SprB, a 669-kDa cell-surface adhesin, is required for efficient gliding. SprB was visualized by electron microscopy as thin 150-nm-long filaments extending from the cell surface. Fluorescence microscopy revealed movement of SprB proteins toward the poles of the cell at ∼2 μm/s. The fluorescent signals appeared to migrate around the pole and continue at the same speed toward the opposite pole along an apparent left-handed helical closed loop. Movement of SprB, and of cells, was rapidly and reversibly blocked by the addition of carbonyl cyanide m-chlorophenylhydrazone, which dissipates the proton gradient across the cytoplasmic membrane. In a gliding cell, some of the SprB protein appeared to attach to the substratum. The cell body moved forward and rotated with respect to this point of attachment. Upon reaching the rear of the cell, the attached SprB often was released from the substratum, and apparently recirculated to the front of the cell along a helical path. The results suggest a model for Flavobacterium gliding, supported by mathematical analysis, in which adhesins such as SprB are propelled along a closed helical loop track, generating rotation and translation of the cell body.

Flavobacterium johnsoniae GldK, GldL, GldM, and SprA are required for secretion of the cell surface gliding motility adhesins SprB and RemA

Flavobacterium johnsoniae cells move rapidly over surfaces by gliding motility. Gliding results from the movement of adhesins such as SprB and RemA along the cell surface. These adhesins are delivered to the cell surface by a Bacteroidetes-specific secretion system referred to as the type IX secretion system (T9SS). GldN, SprE, SprF, and SprT are involved in secretion by this system. Here we demonstrate that GldK, GldL, GldM, and SprA are each also involved in secretion. Nonpolar deletions of gldK, gldL, or gldM resulted in the absence of gliding motility and in T9SS defects. The mutant cells produced SprB and RemA proteins but failed to secrete them to the cell surface. The mutants were resistant to phages that use SprB or RemA as a receptor, and they failed to attach to glass, presumably because of the absence of cell surface adhesins. Deletion of sprA resulted in similar but slightly less dramatic phenotypes. sprA mutant cells failed to secrete SprB and RemA, but cells remained susceptible to some phages and retained some limited ability to glide. The phenotype of the sprA mutant was similar to those previously described for sprE and sprT mutants. SprA, SprE, and SprT are needed for secretion of SprB and RemA but may not be needed for secretion of other proteins targeted to the T9SS. Genetic and molecular experiments demonstrate that gldK, gldL, gldM, and gldN form an operon and suggest that the proteins encoded by these genes may interact to form part of the F. johnsoniae T9SS.

Analysis of energy sources for Mycoplasma penetrans gliding motility

Mycoplasma penetrans, a potential human pathogen found mainly in HIV-infected individuals, uses a tip structure for both adherence and gliding motility. To improve our understanding of the molecular mechanism of M. penetrans gliding motility, we used chemical inhibitors of energy sources associated with motility of other organisms to determine which of these is used by M. penetrans and also tested whether gliding speed responded to temperature and pH. Mycoplasma penetrans gliding motility was not eliminated in the presence of a proton motive force inhibitor, a sodium motive force inhibitor, or an agent that depletes cellular ATP. At near-neutral pH, gliding speed increased as temperature increased. The absence of a clear chemical energy source for gliding motility and a positive correlation between speed and temperature suggest that energy derived from heat provides the major source of power for the gliding motor of M. penetrans.

Flavobacterium johnsoniae RemA is a mobile cell surface lectin involved in gliding

Cells of Flavobacterium johnsoniae move rapidly over surfaces by a process known as gliding motility. Gld proteins are thought to comprise the motor that propels the cell surface adhesin SprB. Cells with mutations in sprB are partially defective in motility and are also resistant to some bacteriophages. Transposon mutagenesis of a strain carrying a deletion spanning sprB identified eight mutants that were resistant to additional phages and exhibited reduced motility. Four of the mutants had transposon insertions in remA, which encodes a cell surface protein that has a lectin domain and appears to interact with polysaccharides. Three other genes identified in this screen (remC, wza, and wzc) encode proteins predicted to be involved in polysaccharide synthesis and secretion. Myc-tagged versions of RemA localized to the cell surface and were propelled rapidly along the cell at speeds of 1 to 2 μm/s. Deletion of gldN and gldO, which encode components of a bacteroidete protein secretion system, blocked the transport of RemA to the cell surface. Overexpression of RemA resulted in the formation of cell aggregates that were dispersed by the addition of galactose or rhamnose. Cells lacking RemC, Wza, and Wzc failed to aggregate. Cells of a remC mutant and cells of a remA mutant, neither of which formed aggregates in isolation, aggregated when they were mixed together, suggesting that polysaccharides secreted by one cell may interact with RemA on another cell. Fluorescently labeled lectin Ricinus communis agglutinin I detected polysaccharides secreted by F. johnsoniae. The polysaccharides bound to cells expressing RemA and were rapidly propelled on the cell surface. RemA appears to be a mobile cell surface adhesin, and secreted polysaccharides may interact with the lectin domain of RemA and enhance motility.

Mutations in Flavobacterium johnsoniae sprE result in defects in gliding motility and protein secretion

Cells of the gliding bacterium Flavobacterium johnsoniae move rapidly over surfaces. Transposon mutagenesis was used to identify sprE, which is involved in gliding. Mutations in sprE resulted in the formation of nonspreading colonies on agar. sprE mutant cells in wet mounts were almost completely deficient in attachment to and movement on glass, but a small percentage of cells exhibited slight movements, indicating that the motility machinery was not completely disrupted. SprE is a predicted lipoprotein with a tetratricopeptide repeat domain. SprE is similar in sequence to Porphyromonas gingivalis PorW, which is required for secretion of gingipain protease virulence factors. Disruption of F. johnsoniae sprE resulted in decreased extracellular chitinase activity and decreased secretion of the cell surface motility protein SprB. Reduced secretion of cell surface components of the gliding machinery, such as SprB, may account for the defects in gliding. Orthologs of sprE are found in many gliding and nongliding members of the phylum Bacteroidetes, suggesting that similar protein secretion systems are common among members of this large and diverse group of bacteria.

Development and use of a gene deletion strategy for Flavobacterium johnsoniae to identify the redundant gliding motility genes remF, remG, remH, and remI

Cells of Flavobacterium johnsoniae exhibit rapid gliding motility over surfaces. Cell movement is thought to involve motor complexes comprised of Gld proteins that propel the cell surface adhesin SprB. The four distal genes of the sprB operon (sprC, sprD, sprB, and sprF) are required for normal motility and for formation of spreading colonies, but the roles of the remaining three genes (remF, remG, and fjoh_0982) are unclear. A gene deletion strategy was developed to determine whether these genes are involved in gliding. A spontaneous streptomycin-resistant rpsL mutant of F. johnsoniae was isolated. Introduction of wild-type rpsL on a plasmid restored streptomycin sensitivity, demonstrating that wild-type rpsL is dominant to the mutant allele. The gene deletion strategy employed a suicide vector carrying wild-type rpsL and used streptomycin for counterselection. This approach was used to delete the region spanning remF, remG, and fjoh_0982. The mutant cells formed spreading colonies, demonstrating that these genes are not required for normal motility. Analysis of the genome revealed a paralog of remF (remH) and a paralog of remG (remI). Deletion of remH and remI had no effect on motility of wild-type cells, but cells lacking remF and remH, or cells lacking remG and remI, formed nonspreading colonies. The motility defects resulting from the combination of mutations suggest that the paralogous proteins perform redundant functions in motility. The rpsL counterselection strategy allows construction of unmarked mutations to determine the functions of individual motility proteins or to analyze other aspects of F. johnsoniae physiology.

Flavobacterium johnsoniae sprB is part of an operon spanning the additional gliding motility genes sprC, sprD, and sprF

Cells of Flavobacterium johnsoniae move rapidly over surfaces by a process known as gliding motility. Gld proteins are thought to comprise the gliding motor that propels cell surface adhesins, such as the 669-kDa SprB. A novel protein secretion apparatus called the Por secretion system (PorSS) is required for assembly of SprB on the cell surface. Genetic and molecular analyses revealed that sprB is part of a seven-gene operon spanning 29.3 kbp of DNA. In addition to sprB, three other genes of this operon (sprC, sprD, and sprF) are involved in gliding. Mutations in sprB, sprC, sprD, and sprF resulted in cells that failed to form spreading colonies on agar but that exhibited some motility on glass in wet mounts. SprF exhibits some similarity to Porphyromonas gingivalis PorP, which is required for secretion of gingipain protease virulence factors via the P. gingivalis PorSS. F. johnsoniae sprF mutants produced SprB protein but were defective in localization of SprB to the cell surface, suggesting a role for SprF in secretion of SprB. The F. johnsoniae PorSS is involved in secretion of extracellular chitinase in addition to its role in secretion of SprB. SprF was not needed for chitinase secretion and may be specifically required for SprB secretion by the PorSS. Cells with nonpolar mutations in sprC or sprD produced and secreted SprB and propelled it rapidly along the cell surface. Multiple paralogs of sprB, sprC, sprD, and sprF are present in the genome, which may explain why mutations in sprB, sprC, sprD, and sprF do not result in complete loss of motility and suggests the possibility that semiredundant SprB-like adhesins may allow movement of cells over different surfaces.

Electron cryotomography

Electron cryotomography (ECT) is an emerging technology that allows thin samples such as macromolecular complexes and small bacterial cells to be imaged in 3-D in a nearly native state to "molecular" ( approximately 4 nm) resolution. As such, ECT is beginning to deliver long-awaited insight into the positions and structures of cytoskeletal fi laments, cell wall elements, motility machines, chemoreceptor arrays, internal compartments, and other ultrastructures. This article describes the technique and summarizes its contributions to bacterial cell biology. For comparable recent reviews, see (Subramaniam 2005; Jensen and Briegel 2007; Murphy and Jensen 2007; Li and Jensen 2009). For reviews on the history, technical details, and broader application of electron tomography in general, see for example (Subramaniam and Milne 2004; Lucić et al. 2005; Leis et al. 2008; Midgley and Dunin-Borkowski 2009).

Flavobacterium johnsoniae gldN and gldO are partially redundant genes required for gliding motility and surface localization of SprB

Cells of the gliding bacterium Flavobacterium johnsoniae move rapidly over surfaces. Mutations in gldN cause a partial defect in gliding. A novel bacteriophage selection strategy was used to aid construction of a strain with a deletion spanning gldN and the closely related gene gldO in an otherwise wild-type F. johnsoniae UW101 background. Bacteriophage transduction was used to move a gldN mutation into F. johnsoniae UW101 to allow phenotypic comparison with the gldNO deletion mutant. Cells of the gldN mutant formed nonspreading colonies on agar but retained some ability to glide in wet mounts. In contrast, cells of the gldNO deletion mutant were completely nonmotile, indicating that cells require GldN, or the GldN-like protein GldO, to glide. Recent results suggest that Porphyromonas gingivalis PorN, which is similar in sequence to GldN, has a role in protein secretion across the outer membrane. Cells of the F. johnsoniae gldNO deletion mutant were defective in localization of the motility protein SprB to the cell surface, suggesting that GldN may be involved in secretion of components of the motility machinery. Cells of the gldNO deletion mutant were also deficient in chitin utilization and were resistant to infection by bacteriophages, phenotypes that may also be related to defects in protein secretion.

A protein secretion system linked to bacteroidete gliding motility and pathogenesis

Porphyromonas gingivalis secretes strong proteases called gingipains that are implicated in periodontal pathogenesis. Protein secretion systems common to other Gram-negative bacteria are lacking in P. gingivalis, but several proteins, including PorT, have been linked to gingipain secretion. Comparative genome analysis and genetic experiments revealed 11 additional proteins involved in gingipain secretion. Six of these (PorK, PorL, PorM, PorN, PorW, and Sov) were similar in sequence to Flavobacterium johnsoniae gliding motility proteins, and two others (PorX and PorY) were putative two-component system regulatory proteins. Real-time RT-PCR analysis revealed that porK, porL, porM, porN, porP, porT, and sov were down-regulated in P. gingivalis porX and porY mutants. Disruption of the F. johnsoniae porT ortholog resulted in defects in motility, chitinase secretion, and translocation of a gliding motility protein, SprB adhesin, to the cell surface, providing a link between a unique protein translocation system and a motility apparatus in members of the Bacteroidetes phylum.

Novel ultramicrobacterial isolates from a deep Greenland ice core represent a proposed new species, Chryseobacterium greenlandense sp. nov

Three novel orange, ultramicrobacterial isolates, UMB10, UMB14, and UMB34(T) were isolated from enrichment cultures inoculated with a melted 3,043 m deep Greenland ice core sample. Phylogenetic analysis of the 16S rRNA gene sequences indicated that the isolates belonged to a single species within the genus Chryseobacterium. They were most closely related to Chryseobacterium aquaticum (99.3%), Chryseobacterium soli (97.1%), and Chryseobacterium soldanellicola (96.9%). Genomic hybridization showed low levels of relatedness between UMB34(T) and C. aquaticum and C. soldanellicola (19-30%) and C. soli and Chryseobacterium jejuense (45-56%). Comparative genomic fingerprinting analysis using the enterobacterial repetitive intergenic consensus (ERIC) sequence showed nearly identical banding patterns for the three isolates and these patterns were distinct from those of C. aquaticum, C. soldanellicola, C. soli, and C. jejuense. The cells were short rods, lacked flagella, had cell volumes of <0.1 mum(3), formed buds and smaller protrusions (blebs), produced copious extracellular material and a flexirubin type pigment. UMB34(T) produced acids from carbohydrates and utilized glucose and maltose although it did not assimilate mannose. The DNA G + C was 39.6-41.6 mol%. Based on the differences from validly named Chryseobacterium species, it was concluded that these isolates represent a new species for which the name, Chryseobacterium greenlandense is proposed. The type strain is UMB34(T) (=CIP 110007T = NRRL B-59357).

Cryo-electron tomography of bacteria: progress, challenges and future prospects

Recent advances in three-dimensional electron microscopy provide remarkable tools to image the interior of bacterial cells. Glimpses of cells at resolutions that are 1-2 orders of magnitude higher than those currently attained with light microscopy can now be obtained with cryo-electron tomography, especially when used in combination with new tools for image averaging. This Review highlights recent advances in this area and provides an assessment of the general applicability, current limitations and type of structural information that can be obtained about the organization of intact cells using tomography. Possible future directions for whole cell imaging are also discussed.

Cryo-electron tomography in biology and medicine

During the last six decades electron microscopy (EM) has been essential to ultra-structural studies of the cell to understand the fundamentals of cellular morphology and processes underlying diseases. More recently, electron tomography (ET) has emerged as a novel approach able to provide three-dimensional (3D) information on cells and tissues at molecular level. Electron tomography is comparable to medical tomographic techniques like CAT, PET and MRI in the sense that it provides a 3D view of an object, yet it does so at a cellular scale and with nanometer resolution. Electron tomography has the unique ability to visualize molecular assemblies, cytoskeletal elements and organelles within cells. The three-dimensional perspective it provides has revised our understanding of cellular organization and its relation with morphological changes in normal development and disease. Cryo-electron tomography of vitrified samples at cryogenic temperatures combines excellent structural preservation with direct high-resolution imaging. The use of cryo-preparation and imaging techniques eliminates artifacts induced by plastic embedding and staining of the samples is circumvented. This review describes the technique of cryo-electron tomography, its basic principles, cryo-specimen preparation, tomographic data acquisition and image processing. A number of illustrative examples ranging from whole cells, cytoskeletal filaments, viruses and organelles are presented along with a comprehensive list of research articles employing cryo-electron tomography as the key ultrastuctural technique.

Electron cryotomography: a new view into microbial ultrastructure

Electron cryotomography (ECT) is an emerging technology that allows thin samples such as small bacterial cells to be imaged in 3D in a nearly native state to 'molecular' (approximately 4nm) resolution. As such, ECT is beginning to deliver long-awaited insight into the positions and structures of cytoskeletal filaments, cell wall elements, motility machines, chemoreceptor arrays, internal compartments, and other ultrastructures. Here we briefly explain ECT, review its recent contributions to microbiology, and conclude with a discussion of future prospects.

Cryo-electron tomography of cells: connecting structure and function

Cryo-electron tomography (cryo-ET) allows the visualization of cellular structures under close-to-life conditions and at molecular resolution. While it is inherently a static approach, yielding structural information about supramolecular organization at a certain time point, it can nevertheless provide insights into function of the structures imaged, in particular, when supplemented by other approaches. Here, we review the use of experimental methods that supplement cryo-ET imaging of whole cells. These include genetic and pharmacological manipulations, as well as correlative light microscopy and cryo-ET. While these methods have mostly been used to detect and identify structures visualized in cryo-ET or to assist the search for a feature of interest, we expect that in the future they will play a more important role in the functional interpretation of cryo-tomograms.

The surprisingly diverse ways that prokaryotes move

Prokaryotic cells move through liquids or over moist surfaces by swimming, swarming, gliding, twitching or floating. An impressive diversity of motility mechanisms has evolved in prokaryotes. Movement can involve surface appendages, such as flagella that spin, pili that pull and Mycoplasma 'legs' that walk. Internal structures, such as the cytoskeleton and gas vesicles, are involved in some types of motility, whereas the mechanisms of some other types of movement remain mysterious. Regardless of the type of motility machinery that is employed, most motile microorganisms use complex sensory systems to control their movements in response to stimuli, which allows them to migrate to optimal environments.

SprB is a cell surface component of the Flavobacterium johnsoniae gliding motility machinery

Cells of the gliding bacterium Flavobacterium johnsoniae move rapidly over surfaces by an unknown mechanism. Transposon insertions in sprB resulted in cells that were defective in gliding. SprB is a highly repetitive 669-kDa cell surface protein, and antibodies against SprB inhibited the motility of wild-type cells. Polystyrene microspheres coated with antibodies against SprB attached to and were rapidly propelled along the cell surface, suggesting that SprB is one of the outermost components of the motility machinery. The movement of SprB along the cell surface supports a model of gliding motility in which motors anchored to the cell wall rapidly propel cell surface adhesins.