Partitioning, movement, and positioning of nucleoids in Mycoplasma capricolum

Functional Characterization of the Cell Division Gene Cluster of the Wall-less Bacterium Mycoplasma genitalium

It is well-established that FtsZ drives peptidoglycan synthesis at the division site in walled bacteria. However, the function and conservation of FtsZ in wall-less prokaryotes such as mycoplasmas are less clear. In the genome-reduced bacterium Mycoplasma genitalium, the cell division gene cluster is limited to four genes: mraZ, mraW, MG_223, and ftsZ. In a previous study, we demonstrated that ftsZ was dispensable for growth of M. genitalium under laboratory culture conditions. Herein, we show that the entire cell division gene cluster of M. genitalium is non-essential for growth in vitro. Our analyses indicate that loss of the mraZ gene alone is more detrimental for growth of M. genitalium than deletion of ftsZ or the entire cell division gene cluster. Transcriptional analysis revealed a marked upregulation of ftsZ in the mraZ mutant. Stable isotope labeling by amino acids in cell culture (SILAC)-based proteomics confirmed the overexpression of FtsZ in MraZ-deprived cells. Of note, we found that ftsZ expression was upregulated in non-adherent cells of M. genitalium, which arise spontaneously at relatively high rates. Single cell analysis using fluorescent markers showed that FtsZ localization varied throughout the cell cycle of M. genitalium in a coordinated manner with the chromosome and the terminal organelle (TMO). In addition, our results indicate a possible role for the RNA methyltransferase MraW in the regulation of FtsZ expression at the post-transcriptional level. Altogether, this study provides an extensive characterization of the cell division gene cluster of M. genitalium and demonstrates the existence of regulatory elements controlling FtsZ expression at the temporal and spatial level in mycoplasmas.

Genetic requirements for cell division in a genomically minimal cell

Genomically minimal cells, such as JCVI-syn3.0, offer a platform to clarify genes underlying core physiological processes. Although this minimal cell includes genes essential for population growth, the physiology of its single cells remained uncharacterized. To investigate striking morphological variation in JCVI-syn3.0 cells, we present an approach to characterize cell propagation and determine genes affecting cell morphology. Microfluidic chemostats allowed observation of intrinsic cell dynamics that result in irregular morphologies. A genome with 19 genes not retained in JCVI-syn3.0 generated JCVI-syn3A, which presents morphology similar to that of JCVI-syn1.0. We further identified seven of these 19 genes, including two known cell division genes, ftsZ and sepF, a hydrolase of unknown substrate, and four genes that encode membrane-associated proteins of unknown function, which are required together to restore a phenotype similar to that of JCVI-syn1.0. This result emphasizes the polygenic nature of cell division and morphology in a genomically minimal cell.

Preferential Localization of the Bacterial Nucleoid

Prokaryotes do not make use of a nucleus membrane to segregate their genetic material from the cytoplasm, so that their nucleoid is potentially free to explore the whole volume of the cell. Nonetheless, high resolution images of bacteria with very compact nucleoids show that such spherical nucleoids are invariably positioned at the center of mononucleoid cells. The present work aims to determine whether such preferential localization results from generic (entropic) interactions between the nucleoid and the cell membrane or instead requires some specific mechanism, like the tethering of DNA at mid-cell or periodic fluctuations of the concentration gradient of given chemical species. To this end, we performed numerical simulations using a coarse-grained model based on the assumption that the formation of the nucleoid results from a segregative phase separation mechanism driven by the de-mixing of the DNA and non-binding globular macromolecules. These simulations show that the abrupt compaction of the DNA coil, which takes place at large crowder density, close to the jamming threshold, is accompanied by the re-localization of the DNA coil close to the regions of the bounding wall with the largest curvature, like the hemispherical caps of rod-like cells, as if the DNA coil were suddenly acquiring the localization properties of a solid sphere. This work therefore supports the hypothesis that the localization of compact nucleoids at regular cell positions involves either some anchoring of the DNA to the cell membrane or some dynamical localization mechanism.

Mycoplasma mobile cells elongated by detergent and their pivoting movements in gliding

Mycoplasma mobile glides on solid surfaces by the repeated binding of leg structures to sialylated oligosaccharide fixed on a solid surface. To obtain information about the propulsion caused by the leg, we made elongated and stiff cells using a detergent. Within 30 min after the cells were treated with 0.1% Tween 60, the cells were elongated from 0.8 μm to 2.2 μm in length while maintaining their gliding activity. Fluorescence and electron microscopy showed that a part of the cytoskeletal structure was elongated, while the localization of proteins involved in the gliding was not modified significantly. The elongated cells glided with repeated pivoting around the cellular position of gliding machinery by 10 degrees of amplitude at a frequency of 2 to 3 times per second, suggesting that the propulsion in a line perpendicular to the cell axis can occur with different timings. The pivoting speed decreased as the cell length increased, probably from the load generated by the friction. The torque required to achieve the actual pivoting increased with the cell length without saturation, reaching 54.7 pN nm at 4.3 μm in cell length.

Cytoskeletal asymmetrical dumbbell structure of a gliding mycoplasma, Mycoplasma gallisepticum, revealed by negative-staining electron microscopy

Several mycoplasma species feature a membrane protrusion at a cell pole, and unknown mechanisms provide gliding motility in the direction of the pole defined by the protrusion. Mycoplasma gallisepticum, an avian pathogen, is known to form a membrane protrusion composed of bleb and infrableb and to glide. Here, we analyzed the gliding motility of M. gallisepticum cells in detail. They glided in the direction of the bleb at an average speed of 0.4 microm/s and remained attached around the bleb to a glass surface, suggesting that the gliding mechanism is similar to that of a related species, Mycoplasma pneumoniae. Next, to elucidate the cytoskeletal structure of M. gallisepticum, we stripped the envelopes by treatment with Triton X-100 under various conditions and observed the remaining structure by negative-staining transmission electron microscopy. A unique cytoskeletal structure, about 300 nm long and 100 nm wide, was found in the bleb and infrableb. The structure, resembling an asymmetrical dumbbell, is composed of five major parts from the distal end: a cap, a small oval, a rod, a large oval, and a bowl. Sonication likely divided the asymmetrical dumbbell into a core and other structures. The cytoskeletal structures of M. gallisepticum were compared with those of M. pneumoniae in detail, and the possible protein components of these structures were considered.

Genome transplantation in bacteria: changing one species to another

As a step toward propagation of synthetic genomes, we completely replaced the genome of a bacterial cell with one from another species by transplanting a whole genome as naked DNA. Intact genomic DNA from Mycoplasma mycoides large colony (LC), virtually free of protein, was transplanted into Mycoplasma capricolum cells by polyethylene glycol-mediated transformation. Cells selected for tetracycline resistance, carried by the M. mycoides LC chromosome, contain the complete donor genome and are free of detectable recipient genomic sequences. These cells that result from genome transplantation are phenotypically identical to the M. mycoides LC donor strain as judged by several criteria.

Cytoskeleton of mollicutes

Mollicutes are a class of bacteria that lack a peptidoglycan layer but have various cell shapes. They perform chromosome segregation and binary fission in a well-organized manner. Especially, species with polarized cell morphology duplicate their membrane protrusion at a position adjacent to the original one and move the new protrusion laterally to the opposite end pole before cell division. The featured various cell shapes of Mollicutes are supported by cytoskeletal structures composed of proteins. Recent progress in the study of cytoskeletons of walled bacteria and genome sequencing has revealed that the cytoskeletons of Mollicutes are not common with those of other bacteria. Mollicutes have special cytoskeletal proteins and structures that are sometimes not shared even by other mollicute species.

Distinctive repertoire of contingency genes conferring mutation- based phase variation and combinatorial expression of surface lipoproteins in Mycoplasma capricolum subsp. capricolum of the Mycoplasma mycoides phylogenetic cluster

The generation of surface variation among many divergent species of Mollicutes (mycoplasmas) occurs through stochastic expression patterns of diverse lipoprotein genes. The size and wide distribution of such variable gene sets in minimal (approximately 0.6- to 1.4-Mb) mycoplasmal genomes suggest their key role in the adaptation and survival of these wall-less monoderms. Diversity through variable genes is less clearly established among phylogenetically similar mycoplasmas, such as the Mycoplasma mycoides cluster of ruminant pathogens, which vary widely in host range and pathobiology. Using (i) genome sequences from two members of this clade, Mycoplasma capricolum subsp. capricolum and M. mycoides subsp. mycoides small colony biotype (SC), (ii) antibodies to specific peptide determinants of predicted M. capricolum subsp. capricolum gene products, and (iii) analysis of the membrane-associated proteome of M. capricolum subsp. capricolum, a novel set of six genes (vmcA to vmcF) expressing distinct Vmc (variable M. capricolum subsp. capricolum) lipoproteins is demonstrated. These occur at two separate loci in the M. capricolum subsp. capricolum genome, which shares striking overall similarity and gene synteny with the M. mycoides subsp. mycoides SC genome. Collectively, Vmc expression is noncoordinate and combinatorial, subject to a single-unit insertion/deletion in a 5' flanking dinucleotide repeat that governs expression of each vmc gene. All vmc genes share modular regions affecting expression and membrane translocation. In contrast, vmcA to vmcD genes at one locus express surface proteins with highly structured size-variable repeating domains, whereas vmcE to vmcF genes express products with short repeats devoid of predicted structure. These genes confer a distinctive, dynamic surface architecture that may represent adaptive differences within this important group of pathogens as well as exploitable diagnostic targets.

Gliding ghosts of Mycoplasma mobile

Several species of mycoplasmas glide on solid surfaces, in the direction of their membrane protrusion at a cell pole, by an unknown mechanism. Our recent studies on the fastest species, Mycoplasma mobile, suggested that the gliding machinery, localized at the base of the membrane protrusion (the "neck"), is composed of two huge proteins. This machinery forms spikes sticking out from the neck and propels the cell by alternately binding and unbinding the spikes to a solid surface. Here, to study the intracellular mechanisms for gliding, we established a permeabilized gliding ghost model, analogous to the "Triton model" of the eukaryotic axoneme. Treatment with Triton X-100 stopped the gliding and converted the cells to permeabilized "ghosts." When ATP was added exogenously, approximately 85% of the ghosts were reactivated, gliding at speeds similar to those of living cells. The reactivation activity and inhibition by various nucleotides and ATP analogs, as well as their kinetic parameters, showed that the machinery is driven by the hydrolysis of ATP to ADP plus phosphate, caused by an unknown ATPase.

Dynamic localization of bacterial and plasmid chromosomes

Plasmid-encoded partition genes determine the dynamic localization of plasmid molecules from the mid-cell position to the 1/4 and 3/4 positions. Similarly, bacterial homologs of the plasmid genes participate in controlling the bidirectional migration of the replication origin (oriC) regions during sporulation and vegetative growth in Bacillus subtilis, but not in Escherichia coli. In E. coli, but not B. subtilis, the chromosomal DNA is fully methylated by DNA adenine methyltransferase. The E. coli SeqA protein, which binds preferentially to hemimethylated nascent DNA strands, exists as discrete foci in vivo. A single SeqA focus, which is a SeqA-hemimethylated DNA cluster, splits into two foci that then abruptly migrate bidirectionally to the 1/4 and 3/4 positions during replication. Replicated oriC copies are linked to each other for a substantial period of generation time, before separating from each other and migrating in opposite directions. The MukFEB complex of E. coli and Smc of B. subtilis appear to participate in the reorganization of bacterial sister chromosomes.

Visualization of the attachment organelle and cytadherence proteins of Mycoplasma pneumoniae by immunofluorescence microscopy

A method was developed for protein localization in Mycoplasma pneumoniae by immunofluorescence microscopy. The P1 adhesin protein was revealed to be located at least at one cell pole in all adhesive cells, as has been observed by immunoelectron microscopy. Cell images were classified according to P1 localization and assigned by DNA content. Cells with a single P1 focus at one cell pole had a lower DNA content than cells with two foci, at least one of which was positioned at a cell pole. Those with one focus at each cell pole had the highest DNA content, suggesting that the nascent attachment organelle is formed next to the old one and migrates to the opposite cell pole before cell division. Double staining revealed that the accessory proteins for cytadherence-HMW1, HMW3, P30, P90, P40, and P65-colocalized with the P1 adhesin in all cells. The localization of cytadherence proteins was also examined in cytadherence-deficient mutant cells with a branched morphology. In M5 mutant cells, which lack the P90 and P40 proteins, HMW1, HMW3, P1, and P30 were focused at the cell poles of short branches, and P65 showed no signal. In M7 mutant cells, which produce a truncated P30 protein, HMW1, HMW3, P1, P90, and P40 were focused, and P65 showed no signal. In M6 mutant cells, which express no HMW1 and a truncated P30 protein, the P1 adhesin was distributed throughout the entire cell body, and no signal was detected for the other proteins. These results suggest that the cytadherence proteins are sequentially assembled to the attachment organelle with HMW1 first, HMW3, P1, P30, P90, and P40 next, and P65 last.

Cytoplasmic filament-deficient mutant of Treponema denticola has pleiotropic defects

In Treponema denticola, a ribbon-like structure of cytoplasmic filaments spans the cytoplasm at all stages of the cell division process. Insertional inactivation was used as a first step to determine the function of the cytoplasmic filaments. A suicide plasmid was constructed that contained part of cfpA and a nonpolar erythromycin resistance cassette (ermF and ermAM) inserted near the beginning of the gene. The plasmid was electroporated into T. denticola, and double-crossover recombinants which had the chromosomal copy of cfpA insertionally inactivated were selected. Immunoblotting and electron microscopy confirmed the lack of cytoplasmic filaments. The mutant was further analyzed by dark-field microscopy to determine cell morphology and by the binding of two fluorescent dyes to DNA to assess the distribution of cellular nucleic acids. The cytoplasmic filament protein-deficient mutant exhibited pleiotropic defects, including highly condensed chromosomal DNA, compared to the homogeneous distribution of the DNA throughout the cytoplasm in a wild-type cell. Moreover, chains of cells are formed by the cytoplasmic filament-deficient mutant, and those cells show reduced spreading in agarose, which may be due to the abnormal cell length. The chains of cells and the highly condensed chromosomal DNA suggest that the cytoplasmic filaments may be involved in chromosome structure, segregation, or the cell division process in Treponema.

Gliding mutants of Mycoplasma mobile: relationships between motility and cell morphology, cell adhesion and microcolony formation

The present study characterizes gliding motility mutants of Mycoplasma mobile which were obtained by UV irradiation. They were identified by their abnormal colony shapes in 0.1% agar medium, showing a reduced number of satellite colonies compared to the wild-type. A total of ten mutants were isolated based on their colony phenotype. Using dark-field and electron microscopy, two classes of mutants, group I and group II, were defined. Cells of group I mutants had irregular, flexible and sometimes elongated head-like structures and showed a tendency to aggregate. Neither binding to glass nor gliding motility was observed in these mutants. Cells of group II mutants were rather spherical in shape, with the long axis reduced to 80% and the short axis enlarged to 120% of that of wild-type cells, respectively. Their gliding speed was 20% faster than that of wild-type cells. Three of the ten mutants remained unclassified. Mutant m6 had a reduced binding activity to glass and a reduced gliding motility with 50% of the speed of the wild-type strain. The ability of wild-type and mutant colonies to adsorb erythrocytes was found to correlate with the binding activity required for gliding, indicating that mycoplasma gliding depends on cytadherence-associated components. Finally, the ability to form microcolonies on surfaces was shown to correlate with the gliding activity, suggesting a certain role of gliding motility in the parasitic life-cycle of mycoplasmas.

Cell reproduction cycle of mycoplasma

The cell reproduction cycle of parasitic wall-free bacteria, mycoplasma, is reviewed. DNA replication of Mycoplasma capricolum starts at a fixed site neighboring the dnaA gene and proceeds to both directions after a short arrest in one direction. The initiation frequency fits to the slow speed of replication fork and DNA content is set constant. The replicated chromosomes migrate to one and three quarters of cell length before cell division to ensure delivery of the replicated DNA to daughter cells. The cell reproduction is based on binary fission but a branch is formed when DNA replication is inhibited. Mycoplasma pneumoniae has a terminal structure, designated as an attachment organelle, responsible for both host cell adhesion and gliding motility. Behavior of the organelle in a cell implies coupling of organelle formation to the cell reproduction cycle. Several proteins coded in three operons are delivered sequentially to a position neighboring the previous organelle and a nascent one is formed. One of the duplicated attachment organelles migrates to the opposite pole of the cell before cell division. It is becoming clear that mycoplasmas have specialized cell reproduction cycles adapted to the limited genome information and parasitic life.