A sensitive, type-specific, fluorogenic probe assay for detection of human papillomavirus DNA

Optical and Optoacoustic Imaging Probes

Tissue has characteristic properties when it comes to light absorption and scattering. For optical (OI) and optoacoustic imaging (OAI) these properties can be utilised to visualise biological tissue characteristics, as, for example, the oxygenation state of haemoglobin alters the optical and optoacoustic properties of the molecule.

Small Molecule Optoacoustic Contrast Agents: An Unexplored Avenue for Enhancing In Vivo Imaging

Almost every variety of medical imaging technique relies heavily on exogenous contrast agents to generate high-resolution images of biological structures. Organic small molecule contrast agents, in particular, are well suited for biomedical imaging applications due to their favorable biocompatibility and amenability to structural modification. PET/SPECT, MRI, and fluorescence imaging all have a large host of small molecule contrast agents developed for them, and there exists an academic understanding of how these compounds can be developed. Optoacoustic imaging is a relatively newer imaging technique and, as such, lacks well-established small molecule contrast agents; many of the contrast agents used are the same ones which have found use in fluorescence imaging applications. Many commonly-used fluorescent dyes have found successful application in optoacoustic imaging, but others generate no detectable signal. Moreover, the structural features that either enable a molecule to generate a detectable optoacoustic signal or prevent it from doing so are poorly understood, so design of new contrast agents lacks direction. This review aims to compile the small molecule optoacoustic contrast agents that have been successfully employed in the literature to bridge the information gap between molecular design and optoacoustic signal generation. The information contained within will help to provide direction for the future synthesis of optoacoustic contrast agents.

A Simple and Robust Method for Semi-Quantitative Detection of Human Papillomavirus Nucleic Acids (HPV) Helps Oncological Clinicians to Assess the Severeness of HPV Cellular Changing

A simple and robust method for the detection of nucleic acids of human papilloma virus (HPV) has been developed. The assay exploits the excellent sensitivity and specificity of “nested” polymerase chain reaction (nPCR) that is designed in the original single tube configuration to effectively prevent the carry-over contamination. This approach theoretically covers the amplification of all cancer developing genotypes currently known. The nPCR, paired with very simple nucleic acids isolation steps, is a real alternative to the standard method. This manuscript shows its capacity for routine use under clinical conditions. It is shown that the strategy is at least as sensitive as the standard two tube nPCR and the data are acceptably reproducible.

Detection and quantitation of HPV in genital and oral tissues and fluids by real time PCR

BACKGROUND

Human papillomaviruses (HPVs) remain a serious world health problem due to their association with anogenital/oral cancers and warts. While over 100 HPV types have been identified, a subset is associated with malignancy. HPV16 and 18 are the most prevalent oncogenic types, while HPV6 and 11 are most commonly responsible for anogenital warts. While other quantitative PCR (qPCR) assays detect oncogenic HPV, there is no single tube assay distinguishing the most frequent oncogenic types and the most common types found in warts.

RESULTS

A Sybr Green-based qPCR assay was developed utilizing degenerate primers to the highly conserved HPV E1 theoretically detecting any HPV type. A single tube multiplex qPCR assay was also developed using type-specific primer pairs and TaqMan probes that allowed for detection and quantitation of HPV6,11,16,18. Each HPV type was detected over a range from 2 x 10(1) to 2 x 10(6)copies/reaction providing a reliable method of quantitating type-specific HPV in 140 anogenital/cutaneous/oral benign and malignant specimens. 35 oncogenic and low risk alpha genus HPV types were detected. Concordance was detected in previously typed specimens. Comparisons to the gold standard detected an overall sensitivity of 89% (95% CI: 77% - 96%) and specificity of 90% (95%CI: 52% - 98%).

CONCLUSION

There was good agreement between the ability of the qPCR assays described here to identify HPV types in malignancies previously typed using standard methods. These novel qPCR assays will allow rapid detection and quantitation of HPVs to assess their role in viral pathogenesis.

A comparative study of the binding of QSY 21 and Rhodamine 6G fluorescence probes to DNA: structure and dynamics

Molecular dynamics (MD) simulations and ab initio quantum chemical calculations were employed to investigate the structure, dynamics and interactions of the QSY 21 nonfluorescent quencher and the fluorescence dye Rhodamine 6G bound to a B-DNA decamer. For QSY 21, two binding motifs were observed. In the first motif, the central xanthene ring is stacked on one base of the adjacent cytosine-guanine DNA base pair, whereas one of the 2,3-dihydro-1-indolyl aromatic side rings is stacked on the other base. In the second motif, the QSY 21 stacking interaction with the DNA base pair is mediated only by one of the side rings. Several transitions between the motifs are observed during a MD simulation. The ab initio calculations show that none of these motifs is energetically preferred. Two binding motifs were found also for Rhodamine 6G, with the xanthene ring stacked predominantly either on the cytosine or on the guanine. These results suggest that the side rings of QSY 21 play a crucial role in its stacking on the DNA and indicate novel binding mode absent in the case of Rhodamine 6G, which lacks aromatic side rings.

A nonfluorescent, broad-range quencher dye for Förster resonance energy transfer assays

We report here a novel, water-soluble, nonfluorescent dye that efficiently quenches fluorescence from a broad range of visible and near-infrared (NIR) fluorophores in Förster resonance energy transfer (FRET) systems. A model FRET-based caspase-3 assay system was used to test the performance of the quencher dye. Fluorogenic caspase-3 substrates were prepared by conjugating the quencher, IRDye QC-1, to a GDEVDGAK peptide in combination with fluorescein (emission maximum approximately 540 nm), Cy3 (approximately 570 nm), Cy5 (approximately 670 nm), IRDye 680 (approximately 700 nm), IRDye 700DX (approximately 690 nm), or IRDye 800CW (approximately 790 nm). The Förster distance R(0) values are calculated as 41 to 65A for these dye/quencher pairs. The fluorescence quenching efficiencies of these peptides were determined by measuring the fluorescence change on complete cleavage by recombinant caspase-3 and ranged from 97.5% to 98.8%. The fold increase in fluorescence on caspase cleavage of the fluorogenic substrates ranged from 40 to 83 depending on the dye/quencher pair. Because IRDye QC-1 effectively quenches both the NIR fluorophores (e.g., IRDye 700DX, IRDye 680, IRDye 800CW) and the visible fluorophores (e.g., fluorescein, Cy3, Cy5), it should find broad applicability in FRET assays using a wide variety of fluorescent dyes.

p16(INK4A) genetic and epigenetic profiles differ in relation to age and site in head and neck squamous cell carcinomas

Head and neck squamous cell carcinoma (HNSCC) typically affects male smokers older than 55 years. Recently, an increase in the incidence of HNSCC in young adults has been recognized, many of them nonsmokers and females. Functional inactivation of p16 is known to be a common event in HNSCC, mainly by either deletion or methylation. A previous study by this group has shown that p16 deletions in HNSCC are significantly associated with age. The primary objective of this study was to evaluate additional molecular alterations of p16 in HNSCC, specifically in relation to age, site, and human papillomavirus (HPV) status. Patients ranging in age from 22 to 76 years with HNSCC were prospectively identified (n = 24). Methylation-specific polymerase chain reaction and immunohistochemistry were used to evaluate p16 gene inactivation and p16 protein expression, respectively. HPV 16 status was determined for each case. Overall, p16 inactivation was a frequent event detected in 46% of cases. Methylation of p16 was more often detected in females than males (P = .05). All cases showing p16 methylation were from the anterior tongue, and 75% of them were young patients. The results indicate that p16 methylation is a more common event in those younger than 40 years in contrast to p16 deletions, which are more common in those older than 40 years. Consequently, it appears that specific modes of inactivation of p16 in HNSCC are related to specific patient risk profiles. Interestingly, HPV 16 messenger RNA was detected exclusively in HNSCC from the base of tongue lesions and was only found in males. This differs from the patient profile of HNSCC in the young, which affects the anterior tongue and commonly females, thus, making it highly unlikely that this virus is a primary causative agent of HNSCC in these young adults.

Evaluation of ST13 gene expression in colorectal cancer patients

We identified a novel gene ST13 from a subtractive cDNA library of normal intestinal mucosa in 1993, more studies showed that ST13 was a co-chaperone of Hsp70s. Recently we detected the ST13 gene expression in tumor tissue and adjacent normal tissue of the same colorectal cancer patient and investigated if the ST13 gene expression might have any prognostic value. Analysis was performed at molecular level by reverse transcription-PCR using real-time detection method. We measured two genes simultaneously, ST13 as the target gene and glyceraldehydes-3-phosphate dehydrogenase as a reference gene, in primary colorectal tumor specimens and tumor-adjacent normal mucosa specimens from 50 colorectal cancer patients. The expression levels of the ST13 gene were significantly decreased in primary tumors compared with adjacent mucosa (P<0.05). But there were no significant differences in the expression of ST13 as compared with different Dukes' stage, tumor differentiation grade, invasion depth, lymph node metastasis and disease-specific survival.

High level of correlation of human papillomavirus-16 DNA viral load estimates generated by three real-time PCR assays applied on genital specimens

Human papillomavirus-16 (HPV-16) viral load could be a biomarker predictive of the presence of high-grade cervical lesions. Recently, several real-time PCR assays have been developed to accurately measure HPV-16 viral load. However, results from various reports using these assays cannot be compared because interassay test correlation has not been documented. The variability of HPV-16 DNA quantitation was assessed by comparing three real-time PCR assays (HPV-16 L1, HPV-16 E6, and HPV-16 E6 PG) applied on 144 genital samples (125 cervicovaginal lavages and 19 specimens collected using vaginal tampons) obtained from 84 women (66 HIV seropositive and 18 HIV seronegative). Correlation was greater between the HPV-16 E6 assays [correlation coefficient (rho) = 0.92] than between each E6 assay and HPV-16 L1 assay (rho = 0.83 and 0.84, respectively). The median HPV-16 copies measured by HPV-16 E6 PG (14,609 HPV-16 copies/2 muL sample) and HPV-16 E6 (18,846 HPV-16 copies/2 muL) were similar (P = 0.27) but were both greater than the median HPV-16 copies measured with the L1 assay (4,124 HPV-16 copies/2 muL; P < 0.001). Correlations between HPV-16 E6 assays were similar for samples containing non-European (rho = 0.93) or European (rho = 0.95) variants. However, the correlation between HPV-16 L1 and HPV-16 E6 PG or HPV-16 E6 was lower for specimens containing non-European variants (rho = 0.80 and 0.76, respectively) compared with specimens containing European variants (rho > 0.85). HPV-16 DNA quantity estimated with the three assays was comparable although lower with the HPV-16 L1 assay. The level of correlation depended on viral polymorphism, viral load, and cervical disease status.

Real-time Fluorescent PCR Techniques to Study Microbial-Host Interactions

This chapter describes how real-time polymerase chain reaction (PCR) performs and how it may be used to detect microbial pathogens and the relationship they form with their host. Research and diagnostic microbiology laboratories contain a mix of traditional and leading-edge, in-house and commercial assays for the detection of microbes and the effects they impart upon target tissues, organs, and systems. The PCR has undergone significant change over the last decade, to the extent that only a small proportion of scientists have been able or willing to keep abreast of the latest offerings. The chapter reviews these changes. It discusses the second-generation of PCR technology-kinetic or real-time PCR, a tool gaining widespread acceptance in many scientific disciplines but especially in the microbiology laboratory.

Performance assessment of eight high-throughput PCR assays for viral load quantitation of oncogenic HPV types

Infection with mucosotropic human papillomavirus (HPV) is the necessary cause of cervical intraepithelial neoplasia. Several epidemiological studies suggest that HPV viral load can be a risk factor of cervical dysplasia. The purpose of the present study was to evaluate a methodology to determine HPV viral load of eight oncogenic HPV types (16, 18, 31, 39, 45, 51, 52, and 58). The quantitation assay is based on a high-throughput real-time PCR. The E6-E7 region of HPV types 16, 18, 45, and 51 were used to amplify specific DNA sequences and cloned into a plasmid vector. The constructs for HPV types 16, 18, 45, and 51, and the whole genome for HPV types 31, 39, 52, and 58 were quantitated using a limiting dilution analysis and used to create standard curves. Type-specific HPV clones were used to determine specificity, linearity, and intra- and inter-assay variation. The sensitivity of our assay covered a dynamic range of up to seven orders of magnitude with a coefficient of intra-assay variation less than 6% and the inter-assay variation less than 20%. No cross-reactivity was observed on any of the type-specific standard curves when phylogenetically close HPV types were used as templates. Our real-time PCR methodologies are highly reproducible, sensitive, and specific over a sevenfold magnitude dynamic range.

Real-time PCR in the microbiology laboratory

Use of PCR in the field of molecular diagnostics has increased to the point where it is now accepted as the standard method for detecting nucleic acids from a number of sample and microbial types. However, conventional PCR was already an essential tool in the research laboratory. Real-time PCR has catalysed wider acceptance of PCR because it is more rapid, sensitive and reproducible, while the risk of carryover contamination is minimised. There is an increasing number of chemistries which are used to detect PCR products as they accumulate within a closed reaction vessel during real-time PCR. These include the non-specific DNA-binding fluorophores and the specific, fluorophore-labelled oligonucleotide probes, some of which will be discussed in detail. It is not only the technology that has changed with the introduction of real-time PCR. Accompanying changes have occurred in the traditional terminology of PCR, and these changes will be highlighted as they occur. Factors that have restricted the development of multiplex real-time PCR, as well as the role of real-time PCR in the quantitation and genotyping of the microbial causes of infectious disease, will also be discussed. Because the amplification hardware and the fluorogenic detection chemistries have evolved rapidly, this review aims to update the scientist on the current state of the art. Additionally, the advantages, limitations and general background of real-time PCR technology will be reviewed in the context of the microbiology laboratory.

Real-time PCR assays using internal controls for quantitation of HPV-16 and β-globin DNA in cervicovaginal lavages

High-risk human papillomavirus 16 (HPV-16) DNA viral load has been measured with real-time PCR assays by amplifying HPV-16 and a human gene. However, these assays have not used internal controls (ICs) to screen for the presence of inhibitors contained in samples. To quantitate HPV-16 DNA and cell content with real-time PCR, ICs for HPV-16 DNA and beta-globin were synthesised and used to control for inhibition. The assays were sensitive and linear over 5 logs. Good reproducibility was achieved with inter-run coefficients of variation of 23% (10(2) HPV-16 copies), 12% (10(4) HPV-16 copies), 17% (274 beta-globin DNA copies) and 7% (27,400 beta-globin DNA copies). Samples containing 56,800,000, 306,000, 18,000, and 4,070 HPV-16 copies/microg of cellular DNA were tested blindly and estimated to contain 48,800,000, 479,000, 20,300, and 6,620 HPV-16 copies/microg of DNA (mean ratio of measured to expected viral load of 1.27+/-0.32). Inhibition of amplification of HPV-16 and beta-globin ICs by six samples known to contain PCR inhibitors was variable: four inhibited both ICs while two inhibited only the HPV-16 IC. The use of internal controls with real-time PCR for HPV-16 quantitation allows to screen for the presence of inhibitors that do not affect equally primer-driven genomic amplification.

Prevalence of selective inhibition of HPV-16 DNA amplification in cervicovaginal lavages

HPV-16 viral load has been assessed with real-time PCR assays by measuring HPV-16 DNA and a human gene in genital samples. HPV-16 viral load measurements are thus based on the inference that inhibitors contained in samples will equally impede amplification of DNA sequences from HPV-16 and human DNA. We have previously shown that sample lysates can inhibit amplification of HPV-16 but not beta-globin DNA. In the current study, cervicovaginal lavages lysates considered adequate for PCR analysis by a qualitative beta-globin PCR test, were screened for the presence of inhibitors using internal controls (IC) for HPV-16 DNA and beta-globin in real-time PCR assays. Of 150 lysates screened with both ICs, 12 (8%) contained inhibitors. Inhibition of amplification of both ICs was demonstrated in four of these specimens. In eight lysates, amplification of HPV-16 IC only was impeded. Six (50%) of these 12 lysates tested positive for HPV-16 DNA despite the presence of PCR inhibitors. The HPV-16 viral load increased significantly after dilution of 11 of 12 lysates, demonstrating the presence of inhibitors in the undiluted lysate. Nine (90%) of 10 samples with inhibitors that were tested after dilution did not demonstrate inhibitory activity. The use of internal controls in real-time PCR is clearly essential to determine HPV viral loads since the effect of inhibitors on primer-driven genomic amplification is variable.

Chapter 12: Human papillomavirus technologies

Currently, human papillomavirus (HPV) DNA tests validated in large trials and epidemiological studies are the hybrid capture second-generation (HC2) HPV DNA assay and a variety of polymerase chain reaction (PCR) protocols employing degenerate or consensus primers. This article describes the currently available technology for HPV detection and discusses novel technologies and their potential for large-scale screening. Ideally, an HPV test should allow detection of multiple HPV types, identify individual types, and provide quantitative information about the viral load of each individual type found. Moreover, it should be easy to perform, be highly reproducible, with a high specificity and sensitivity, and amenable for high throughput analysis and automation. Because we do not yet fully understand the true value of viral load and the biological relevance of the different HPV types, any HPV test should be able to detect the clinically relevant high-risk types with a sufficient sensitivity of at least 10 000 genome copies per sample. To validate the different current and future test systems and to compare inter-laboratory performance we urgently need reference samples, validated reagents, and standardized protocols.

Real-time PCR-based system for simultaneous quantification of human papillomavirus types associated with high risk of cervical cancer

We have previously shown that women with a high titer of human papillomavirus type 16 (HPV16) in cervical epithelial cells have an increased risk of developing cervical carcinoma in situ. In order to study the relationship between viral DNA amount and risk of cervical carcinoma for the HPV types most commonly found in cervical tumors, we developed a real-time PCR assay for the detection and quantification of HPV16, -18, -31, -33, -35, -39, -45, -52, -58, and -67. These HPV types are analyzed in two reaction tubes, allowing for independent quantification of three viral types, or groups of viral types, in each reaction. A separate reaction is used for estimating the number of a nuclear single-copy gene and is used to calculate the HPV copy number per genomic DNA equivalent in the sample. The system has a dynamic range from 10(2) to 10(7) HPV copies per assay and is applicable to both fresh clinical samples and DNA extracted from archival samples. Reconstitution experiments, made to mimic infections with several HPV types, shows that individual HPV types can be detected in a mixture as long as they represent 1 to 10% of the main type. The system was evaluated with respect to technical specificity and sensitivity, reproducibility, reagent stability, and sample preparation protocol and then used to analyze clinical samples. This homogeneous assay provides a fast and sensitive way for estimating the viral load of a series of the most frequent oncogenic HPV types in biopsies, as well as cervical smear samples.

p16INK4A as a marker for cervical dyskaryosis: CIN and cGIN in cervical biopsies and ThinPrep smears

AIM

To examine the potential of p16(INK4A) as a biomarker for dysplastic squamous and glandular cells of the cervix in tissue sections and ThinPrep smears.

METHODS

Immunocytochemical analysis of p16(INK4A) expression was performed on 22 normal cervical tissue samples, five cervical glandular intraepithelial neoplasia (cGIN), 38 cervical intraepithelial neoplasia 1 (CIN1), 33 CIN2, 46 CIN3, and 10 invasive cancer cases (eight squamous and two adenocarcinomas). All samples were formalin fixed and paraffin wax embedded, and immunohistochemical analysis was carried out using a mouse monoclonal anti-p16(INK4A) antibody after antigen unmasking. The staining intensity was assessed using a 0 to 3 scoring system. In addition, the expression status of p16(INK4A) was examined in 12 normal ThinPrep smears, one smear exhibiting cGIN, and a total of 20 smears exhibiting mild, moderate, and severe dyskaryosis. Human papillomavirus (HPV) detection was carried out using a modified SYBR green assay system. Fluorogenic polymerase chain reaction (PCR) and solution phase PCR were used for specific HPV typing.

RESULTS

p16(INK4A) immunoreactivity was absent in all normal cervical tissues examined. Dysplastic squamous and glandular cells were positive for p16(INK4A) expression in all cases included in this study, except for one CIN3 case. p16(INK4A) expression was mainly nuclear in CIN1 cases, and both nuclear and cytoplasmic in CIN2, CIN3, cGIN, and invasive cases. All cases positive for HPV expressed the p16(INK4A) protein, although not all cases found positive for p16(INK4A) were HPV positive. In general, the p16(INK4A) staining intensity was lower in cases negative for HPV or those containing a low risk HPV type.

CONCLUSION

This pattern of overexpression demonstrates the potential use of p16(INK4A) as a diagnostic marker for cervical squamous and also glandular neoplastic lesions. In addition, the technique can be used to identify individual dyskaryotic cells in ThinPrep smears. Thus, p16(INK4A) is a useful marker of cervical dyskaryosis.

Simultaneous identification of Mycobacterium genus and Mycobacterium tuberculosis complex in clinical samples by 5'-exonuclease fluorogenic PCR

Early diagnosis of tuberculosis and screening of other mycobacteria is required for the appropriate management of patients. We have therefore developed a 5'-exonuclease fluorogenic PCR assay in a single-tube balanced heminested format that simultaneously detects Mycobacterium tuberculosis complex (MTC) and members of the Mycobacterium genus (MYC) using the 16S ribosomal DNA target directly on clinical samples. One hundred twenty-seven clinical samples (65 smear negative and 62 smear positive) with a positive culture result from 127 patients were tested, including 40 negative control specimens. The finding of both a positive MTC and probe value and a positive MYC probe value confirmed the presence of MTC or mycobacteria with a 100% positive predictive value. However, a negative value for MTC or MYC did not discount the presence of mycobacteria in the specimen. Interestingly, the addition of the MYC probe allowed the diagnosis of an additional 7% of patients with tuberculosis and rapid screening of nontuberculous mycobacteria (NTM). Thus, over 75% of the patients were diagnosed with mycobacterial disease by PCR. The sensitivity was much higher on smear-positive samples (90.3%) than smear-negative samples (49.2%) and was slightly higher for MTC than NTM samples. With regard to the origin of the sample, MTC pulmonary samples gave better results than others. In conclusion, we believe this test may be useful for the rapid detection of mycobacteria in clinical samples and may be a valuable tool when used together with conventional methods and the clinical data available.

Detection of Australian bat lyssavirus using a fluorogenic probe

BACKGROUND

Australian bat lyssavirus (ABLV) has been transmitted to humans following a scratch or bite from an infected bat in two cases. Following a scratch or bite to a person, the bat is usually submitted for testing and diagnosis is made using a direct fluorescent antibody test on a brain smear. A nested RT-PCR assay has also been utilised to confirm diagnosis. If positive for lyssavirus, post-exposure prophylaxis is administered.

OBJECTIVES

The TaqMan assay was developed to improve the diagnosis of ABLV infection, following problems encountered with the generation of spurious PCR products in the nested RT-PCR and also to reduce the high risk of contamination inherent with nested PCRs.

STUDY DESIGN

RNA was extracted from 161 bat brains and the samples were compared using a conventional RT-PCR and the TaqMan based assay. Samples from a patient with an ABLV infection collected antemortem and postmortem were also tested.

RESULTS

The sensitivity of the new TaqMan based PCR assay compared favourably with the nested PCR previously in use in our laboratory. This assay was able to detect RNA in samples collected antemortem and postmortem for the diagnosis of a human case of ABLV.

CONCLUSIONS

The major advantage of the TaqMan based assay was the speed of diagnosis with a result within minutes of completing the PCR (a result within 4 h of receiving the specimen). This test greatly reduces the chance of false positives through the elimination of second-round PCR and the requirement for agarose gels. The assay is sensitive and specific and should be invaluable for future antemortem and postmortem diagnosis of ABLV infection in humans.

Real-time PCR in virology

The use of the polymerase chain reaction (PCR) in molecular diagnostics has increased to the point where it is now accepted as the gold standard for detecting nucleic acids from a number of origins and it has become an essential tool in the research laboratory. Real-time PCR has engendered wider acceptance of the PCR due to its improved rapidity, sensitivity, reproducibility and the reduced risk of carry-over contamination. There are currently five main chemistries used for the detection of PCR product during real-time PCR. These are the DNA binding fluorophores, the 5' endonuclease, adjacent linear and hairpin oligoprobes and the self-fluorescing amplicons, which are described in detail. We also discuss factors that have restricted the development of multiplex real-time PCR as well as the role of real-time PCR in quantitating nucleic acids. Both amplification hardware and the fluorogenic detection chemistries have evolved rapidly as the understanding of real-time PCR has developed and this review aims to update the scientist on the current state of the art. We describe the background, advantages and limitations of real-time PCR and we review the literature as it applies to virus detection in the routine and research laboratory in order to focus on one of the many areas in which the application of real-time PCR has provided significant methodological benefits and improved patient outcomes. However, the technology discussed has been applied to other areas of microbiology as well as studies of gene expression and genetic disease.

A novel strategy for human papillomavirus detection and genotyping with SybrGreen and molecular beacon polymerase chain reaction

Human papillomaviruses (HPVs) play an important role in the pathogenesis of cervical cancer. For identification of the large number of different HPV types found in (pre)malignant lesions, a robust methodology is needed that combines general HPV detection with HPV genotyping. We have developed for formaldehyde-fixed samples a strategy that, in a homogeneous, real-time fluorescence polymerase chain reaction (PCR)-based assay, accomplishes general HPV detection by SybrGreen reporting of HPV-DNA amplicons, and genotyping of seven prevalent HPV types (HPV-6, -11, -16, -18, -31, -33, -45) by real-time molecular beacon PCR. The false-positive rate of the HPV SybrGreen-PCR was 4%, making it well suited as a prescreening, general HPV detection technology. The type specificity of the seven selected HPV molecular beacons was 100% and double infections were readily identified. The multiplexing capacity of the HPV molecular beacon PCR was analyzed and up to three differently labeled molecular beacons could be used in one PCR reaction without observing cross talk. The inherent quantitation capacities of real-time fluorescence PCR allowed the determination of average HPV copy number per cell. We conclude that the HPV SybrGreen-PCR in combination with the HPV molecular beacon PCR provides a robust, sensitive, and quantitative general HPV detection and genotyping methodology.

Rapid detection of west nile virus from human clinical specimens, field-collected mosquitoes, and avian samples by a TaqMan reverse transcriptase-PCR assay

The authors report on the development and application of a rapid TaqMan assay for the detection of West Nile (WN) virus in a variety of human clinical specimens and field-collected specimens. Oligonucleotide primers and FAM- and TAMRA-labeled WN virus-specific probes were designed by using the nucleotide sequence of the New York 1999 WN virus isolate. The TaqMan assay was compared to a traditional reverse transcriptase (RT)-PCR assay and to virus isolation in Vero cells with a large number ( approximately 500) of specimens obtained from humans (serum, cerebrospinal fluid, and brain tissue), field-collected mosquitoes, and avian tissue samples. The TaqMan assay was specific for WN virus and demonstrated a greater sensitivity than the traditional RT-PCR method and correctly identified WN virus in 100% of the culture-positive mosquito pools and 98% of the culture-positive avian tissue samples. The assay should be of utility in the diagnostic laboratory to complement existing human diagnostic testing and as a tool to conduct WN virus surveillance in the United States.

Rapid detection and quantification of members of the archaeal community by quantitative PCR using fluorogenic probes

We describe a rapid, reproducible, and sensitive method for detection and quantification of archaea in naturally occurring microbial communities. A domain-specific PCR primer set and a domain-specific fluorogenic probe having strong and weak selectivity, respectively, for archaeal rRNA genes (rDNAs) were designed. A universal PCR primer set and a universal fluorogenic probe for both bacterial and archaeal rDNAs were also designed. Using these primers and probes, we demonstrated that detection and quantification of archaeal rDNAs in controlled microbial rDNA assemblages can be successfully achieved. The system which we designed was also able to detect and quantify archaeal rDNAs in DNA samples obtained not only from environments in which thermophilic archaea are abundant but also from environments in which methanogenic archaea are abundant. Our findings indicate that this method is applicable to culture-independent molecular analysis of microbial communities in various environments.

Biotechnical use of polymerase chain reaction for microbiological analysis of biological samples

Since its introduction in the mid-80s, polymerase chain reaction (PCR) technology has been recognised as a rapid, sensitive and specific molecular diagnostic tool for the analysis of micro-organisms in clinical, environmental and food samples. Although this technique can be extremely effective with pure solutions of nucleic acids, it's sensitivity may be reduced dramatically when applied directly to biological samples. This review describes PCR technology as a microbial detection method, PCR inhibitors in biological samples and various sample preparation techniques that can be used to facilitate PCR detection, by either separating the micro-organisms from PCR inhibitors and/or by concentrating the micro-organisms to detectable concentrations. Parts of this review are updated and based on a doctoral thesis by Lantz [1] and on a review discussing methods to overcome PCR inhibition in foods [2].

Two sensitive PCR-based methods for detection of hepatitis B virus variants associated with reduced susceptibility to lamivudine

Two novel assays, a restriction fragment length polymorphism (RFLP) assay and an assay based on the 5'-nuclease activity of Taq DNA polymerase, were developed for screening viral variants in lamivudine-treated patients' sera containing <1,000 copies of the hepatitis B virus (HBV) genome per ml. Both assays were designed to detect single-nucleotide changes within the HBV DNA polymerase gene that are associated with lamivudine resistance in vitro and have been used to screen a number of patients' sera for variant virus. Results obtained with these assays and standard sequencing technology were compared with regard to throughput, ability to detect individual virus species present at low concentrations, and ability to detect, distinguish, and quantitate wild-type (wt) and HBV tyrosine methionine(552) aspartate aspartate motif variants in mixed viral populations. Unlike DNA sequencing, both assays are amenable to high-throughput screening and were shown to be able to quantitatively detect variant virus in the presence of a background of wt virus. As with DNA sequencing, both new assays incorporate a PCR amplification step and are able to detect the relatively low amounts of virus found in lamivudine-treated patients' sera. However, these assays are far less labor intensive than the DNA-sequencing techniques presently in use. Overall, the RFLP assay was more sensitive than DNA sequencing in detecting and determining the ratios of wt to variant virus. Furthermore, the RFLP assay and 5'-nuclease assay were equally sensitive in the detection of mixed viral species, but the RFLP assay was superior to the 5'-nuclease assay in the quantitation of mixed viral species. These assays should prove useful for further understanding of virological response to therapy and disease progression.

Detection of viable Listeria monocytogenes with a 5' nuclease PCR assay

A 5' nuclease assay has been developed to detect viable Listeria monocytogenes. The assay targets the hemolysin A (hlyA) transcript, which is found only in L. monocytogenes. The single-tube, reverse transcriptase (RT), fluorogenic probe-based assay was formatted by using Tth DNA polymerase whose activity was modulated by using the manganese-chelating morpholinepropanesulfonic acid (MOPS) buffer. This assay was quantitative over a 3-log-unit range of template concentrations when tested with an in vitro-transcribed hlyA mRNA. The viability of L. monocytogenes was reduced by heating at various temperatures and times up to a maximum of a 9-D inactivation. The location of the primer had a pronounced effect on the utility of the assay, and primers located in the most distal regions of the hlyA transcript appeared to correlate with the number of CFU while primers located more internal on the amplicon overestimated the cell viability. The assay with primers that included the 3' end of the transcript was an accurate indicator of viability as measured by CFU determination or staining with 5-sulfofluorescein diacetate.

Human papillomavirus (HPV) DNA copy number is dependent on grade of cervical disease and HPV type

The association between human papillomavirus (HPV) DNA copy number and cervical disease was investigated. Viral DNA copy number for the most common high-risk HPV types in cervical cancer (types 16, 18, 31, and 45) was determined in cervical cytobrush specimens from 149 women with high-grade cervical intraepithelial neoplasias (CIN II-CIN III), 176 with low-grade CIN (CIN I), and 270 with normal cytology. Quantitative, PCR-based fluorescent assays for each of the HPV genotypes and for the beta-globin gene were used. The amount of cellular DNA increased significantly with increasing disease; thus, HPV was expressed as copies per microgram of cellular DNA. The assay had a dynamic range of >10(7), allowing documentation for the first time of the wide range of HPV copy numbers seen in clinical specimens. Median HPV DNA copy number varied by more than 10(4) among the viral types. HPV16 was present in the highest copy number; over 55% of HPV16-positive samples contained more than 10(8) copies/microgram. Median copy number for HPV16 showed dramatic increases with increasing epithelial abnormality, an effect not seen with the other HPV types. HPV16 increased from a median of 2.2 x 10(7) in patients with normal cytology, to 4.1 x 10(7) in CIN I patients, to 1.3 x 10(9) copies/microgram in CIN II-III patients. Even when stratified by cervical disease and viral type, the range of viral DNA copies per microgram of cellular DNA was quite large, precluding setting a clinically significant cutoff value for "high" copy numbers predictive of disease. This study suggests that the clinical usefulness of HPV quantitation requires reassessment and is assay dependent.

Quantitative real-time polymerase chain reaction for the core facility using TaqMan and the Perkin-Elmer/Applied Biosystems Division 7700 Sequence Detector

Quantitative real-time polymerase chain reaction (PCR) using the Perkin Elmer/Applied Biosystems Division 7700 Sequence Detector provides an accurate method for determination of levels of specific DNA and RNA sequences in tissue samples. It is based on detection of a fluorescent signal produced proportionally during amplification of a PCR product. Turn-around time for data acquisition and analysis by real-time PCR with the 7700 model is short, and results are more reliable than by traditional PCR methods. This technology can be successfully offered as a service in a core faculty setting.

Detection and quantitation of human papillomavirus by using the fluorescent 5' exonuclease assay

A method for the detection and quantitation of oncogenic human papillomavirus (HPV) was developed by using the fluorescent 5' exonuclease assay. The method is based on the amplification of a 180-bp fragment from the 3' part of the E1 open reading frame in a single PCR with type-specific probes for HPV types 16, 18, 31, 33, and 35. The probes can be used separately or in combinations of up to three probes per assay. Quantitation over a range of 10(1) to 10(6) initial HPV copies was possible by using real-time detection of the accumulation of fluorescence with cycle number. Reconstitution experiments, performed to mimic mixed infections, showed that individual HPV types can be detected down to a ratio of about 1% in a mixture. The performance of the assay depends on DNA quality, the presence of PCR inhibitors, and the number of different probes used simultaneously. This homogeneous assay provides a fast and sensitive way of screening for oncogenic HPV types in biopsy specimens as well as cervical smear samples. The closed-tube nature of the assay and the inclusion of uracil N'-glycosylase reduces cross contamination of PCR products to a minimum. A similar assay for beta-actin was used in parallel for quantitation of genomic DNA. After normalizing the samples for genomic DNA content, the mean number of HPV copies per cell could be calculated.

Probing DNA sequences in solution with a monomer-excimer fluorescence color change

The use of a simple fluorescent nucleoside analogue in detection of point mutations by hybridization in solution is described. Pyrene is placed at 3' and 5' ends of a pair of oligodeoxynucleotide probes via a phosphoramidite derivative of deoxyribose with this fluorophore attached at the 1' position, replacing a DNA base. Adjacent binding of dual probes containing this fluorophore to a complementary target sequence results in a pronounced spectral change from blue pyrene monomer emission (lambdamax= 381 398 nm) to green-white excimer emission (lambdamax= 490 nm). Optimization of the relative binding positions of the two probes shows that the greatest spectral change occurs when they bind with partial end overlap. In optimum orientation, the monomer emission band for the probes decreases intensity by as much as a factor of seven and the excimer band increases up to 40-fold on binding a complementary target. Application to the detection of a single-base point mutation in solution is described.

5' nuclease PCR assay to detect Yersinia pestis

The 5' nuclease PCR assay uses a fluorescently labeled oligonucleotide probe (TaqMan) to rapidly detect and quantitate DNA templates in clinical samples. We developed a 5' nuclease PCR assay targeting the plasminogen activator gene (pla) of Yersinia pestis. The assay is species specific, with a detection threshold of 2.1 x 10(5) copies of the pla target or 1.6 pg of total cell DNA. The assay detected Y. pestis in experimentally infected Xenopsylla cheopis fleas and in experimentally infected monkey blood and oropharyngeal swabs. The TaqMan assay is simple to perform and rapid and shows promise as a future field-adaptable technique.

Utility of random amplified polymorphic DNA PCR and TaqMan automated detection in molecular identification of Aspergillus fumigatus

We developed a method for the identification of Aspergillus fumigatus fungal isolates by using random amplified polymorphic DNA (RAPD) PCR (RAPD-PCR) cloning and the TaqMan LS50B fluorogenic detection system (Perkin-Elmer Corp., Applied Biosystems, Foster City, Calif.). DNA from seven clinically important Aspergillus species was screened by RAPD-PCR to identify section- or species-specific amplicons. With the OPZ19 RAPD primer a 1,264-bp product was amplified from all A. fumigatus strains initially examined but not from other species. A partial DNA sequence of this product was used to design a specific primer pair, which generated a single 864-bp fragment with DNA from 90 of 100 A. fumigatus isolates when a "touchdown" (65-->55 degrees C) annealing protocol was used. The TaqMan system, a fluorogenic assay which uses the 5'-->3' endonuclease activity of Taq DNA polymerase, detected this 864-bp product with DNA from 89 of these 90 A. fumigatus strains; 1 DNA sample generated an indeterminate result. With DNA from three morphologically typical A. fumigatus isolates, six white ("albino") A. fumigatus isolates, and five of six Neosartorya species (non-A. fumigatus members of the section Fumigati), the 864-bp product was amplified differentially at an annealing temperature of 56 degrees C but not with the touchdown annealing format. No amplicon was detected with DNA from 56 isolates of heterologous Aspergillus, Penicillium, and Paecilomyces species or from Neosartorya fennelliae; TaqMan assay results were either negative (51 isolates) or indeterminate (5 isolates) for all isolates. This RAPD-PCR and TaqMan assay offers promise as a nucleic acid-based system that can be used for the identification of filamentous fungal isolates and that requires no postamplification sample manipulations.

A case-control study of human papillomavirus and cervical squamous intraepithelial lesions (SIL) in Harris County, Texas: differences among racial/ethnic groups

We conducted a case-control study of the association between SIL and HPV among whites (W), African Americans (AA), and Hispanics (H) in Harris County, Texas. Cases were identified at M.D. Anderson Cancer Center Colposcopy Clinic. Controls were identified among women obtaining routine Pap screening at two Harris County Health Department Clinics. HPV was detected by a PCR-based fluorescent assay. Dichotomous and polytomous logistic regression models were used to estimate adjusted odd ratios (AOR) and 95% confidence intervals (CI) for SIL among racial/ethnic groups and grade of disease. Prevalence of HPV infection was 64% in low grade SIL (LSIL), 84% in high grade SIL (HSIL), and 19% in controls. Risk of SIL was higher in H than in W and AA, AOR 29.5 (12.4-70.5), 15.3 (6.0-33.8), and 5.8 (2.6-12.6), respectively. Similarly, racial/ethnic differences were observed for both LSIL (AOR = 16.6, 7.7, and 4.3, respectively) and HSIL (AOR = 78.6, 34.6, and 14.2, respectively). Findings support the association between SIL and HPV and differences in the strength of the association with LSILs and HSILs. Data also suggest a higher risk for H and a lower risk for AA.