Protective effect of various toothpastes and mouthwashes against erosive and abrasive challenge on eroded dentin: an in vitro study

The study aimed to compare various toothpastes and mouthwashes on permanent tooth dentin after erosive and abrasive challenges. 130 sound premolars dentin were randomly submitted to an initial erosive challenge and a cycle of erosive and abrasive challenges for five days. The five experimental groups (n = 26) were: (1) Control group (artificial saliva), (2) Elmex erosion protection toothpaste and mouthwash, (3) Vitis anticaries biorepair toothpaste and mouthwash, (4) Oral B Pro-expert toothpaste and Oral B Fluorinse mouthwash, and (5) MI Paste ONE toothpaste and Caphosol mouthwash. Microhardness, surface roughness values, and the topographical characteristics of the dentin surface were assessed. The highest percentage of recovered dentin microhardness (%RDMH) value was observed in groups 2 and 4, followed by groups 5 and 3, respectively. The %RDMH values in groups 2 and 4 did not demonstrate a significant difference (p = 0.855). The highest percentage of improvement in surface roughness was recorded in groups 2 and 4, with no significant differences (p = 0.989). The atomic force microscopy (AFM) findings were consistent with the surface roughness data. The best recovery of dentin microhardness and roughness were measured with the Elmex and Oral B toothpaste and mouthwash, followed by MI Paste ONE toothpaste and Caphosol mouthwash and Vitis anticaries biorepair toothpaste and mouthwash.

Chitosan nanoparticle applications in dentistry: a sustainable biopolymer

The epoch of Nano-biomaterials and their application in the field of medicine and dentistry has been long-lived. The application of nanotechnology is extensively used in diagnosis and treatment aspects of oral diseases. The nanomaterials and its structures are being widely involved in the production of medicines and drugs used for the treatment of oral diseases like periodontitis, oral carcinoma, etc. and helps in maintaining the longevity of oral health. Chitosan is a naturally occurring biopolymer derived from chitin which is seen commonly in arthropods. Chitosan nanoparticles are the latest in the trend of nanoparticles used in dentistry and are becoming the most wanted biopolymer for use toward therapeutic interventions. Literature search has also shown that chitosan nanoparticles have anti-tumor effects. This review highlights the various aspects of chitosan nanoparticles and their implications in dentistry.

Characteristics of tin-containing fluoride toothpastes related to erosive tooth wear protection

OBJECTIVES

To assess the effect of different tin-containing toothpastes on the control of erosive tooth wear in enamel and dentin.

METHODS

Enamel and dentin slabs were randomly distributed into 7 experimental groups (n = 10/substrate): C-: negative control (Artificial saliva); AmF (regular fluoridated toothpaste without tin); Sn-1 (SnF2/NaF); Sn-2 (SnF2/NaF/SnCl2); Sn-3 (SnCl2/NaF); Sn-4 (SnF2/SnCl2); Sn-5 (SnCl2/AmF/NaF/chitosan). Specimens were submitted to 5-day erosion-abrasion cycling. Surface loss (SL) was determined with an optical profilometer. Tin deposition on the tooth surfaces and some characteristics of the toothpastes (pH, potentially available F-, %weight of solid particles, and RDA) were also assessed. Data were statistically analyzed (α = 0.05).

RESULTS

For enamel, the Sn-2 presented the lowest SL, not differing significantly from AmF, C+, and Sn-3. The SL of these groups was significantly lower than the C-, except for Sn-3. Sn-1 and Sn-4 were also not significantly different from C-. For dentin, C- significantly showed the highest SL values, whilst, Sn-1 presented the lowest SL, not differing significantly from AmF, Sn-2, C+, and Sn-3. There was a significant positive association between enamel SL and the pH and tin deposition. Dentin SL was significantly negatively associated with the %weight of solid particles and RDA.

CONCLUSIONS

Most of the tin-toothpastes were able to exhibit some protection against ETW. In this process, the toothpastes characteristics play a role, as lower enamel SL was significantly associated with lower pH values and tin deposition; and lower dentin SL was associated with higher %weight of solid particles and RDA of the toothpastes.

CLINICAL SIGNIFICANCE

Tin-containing toothpastes can be used for erosive tooth wear protection, but our study showed that their effect depends on the pH, amount of tin deposition, % weight of solid particles and RDA of the toohpastes.

Remineralisation of enamel and dentine with stabilised stannous fluoride dentifrices in a randomised cross-over in situ trial

OBJECTIVES

To compare the remineralisation efficacy and ion bioavailability of two novel SnF2-containing dentifrices in a blinded, cross-over, randomised in situ clinical study.

METHODS

Six participants wore removal palatal appliances holding human enamel and dentine blocks with subsurface lesions. Appliances were worn for two treatment periods of 14 consecutive days each, with a one-week washout period in-between. Participants were randomly allocated to rinse with a 1:5 diluted coded slurry of one of two dentifrices containing either 5 % casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) +1100 ppm F as SnF2 [MIPOP], or 1100 ppm F as SnF2 [CT], for 1 min, four times a day. Saliva was collected post-treatment and analysed for tin, calcium, inorganic phosphate and fluoride ions using atomic absorption spectrophotometry and ion chromatography. Enamel and dentine lesions were analysed for percent remineralisation (%R) using transverse microradiography and percent surface microhardness recovery (%SMHR).

RESULTS

MIPOP released significantly higher F (3.00 ± 0.27 mM), Ca (15.23 ± 3.23 mM) and Sn (1.18 ± 0.13 mM) into saliva whereas CT released 2.89 ± 0.32 mM F and only 0.84 ± 0.11 mM Ca and 0.28 ± 0.10 mM Sn. MIPOP produced significantly higher %R than CT: 25.6 ± 1.5 % compared to 15.2 ± 0.7 % in enamel, and 33.6 ± 3.1 % compared to 20.6 ± 1.1 % in dentine. Additionally, MIPOP produced significantly higher %SMHR (18.2 ± 7.9 %) compared to CT (4.1 ± 0.6 %).

CONCLUSIONS

Both dentifrices promoted remineralisation, but the MIPOP dentifrice with added CPP-ACP and the ion-stabilising effects of CPP released higher amounts of bioavailable tin and produced significantly higher remineralisation and surface microhardness recovery.

CLINICAL SIGNIFICANCE

Modern dentifrices contain SnF2 for a range of oral health benefits. Challenges associated with stability of these formulations can affect ion bioavailability, reducing efficacy. Two dentifrices with SnF2 promoted remineralisation in situ, however the dentifrice with the added saliva biomimetic CPP-ACP was superior and therefore may produce greater health benefits.

Evaluation of Cytotoxicity and Antimicrobial Activity of Experimental Composites Containing Chitosan-Silver Oxide Particles Against Two Main Pathogenic Bacteria in Periodontal Disease

INTRODUCTION

Bacterial biofilm is known as the main cause of periodontal disease. Generally, the anaerobic Gram-negative, such as Porphyromonas gingivalis and Fusobacterium nucleatum, are considered the most identified bacteria.

OBJECTIVE

This study aimed to investigate the antimicrobial effect and cytotoxicity of two experimental composites containing chitosan-silver oxide (CH-Ag2O) particles.

MATERIALS AND METHODS

Four experimental groups, including Ag2O and CH, along with two composites of CH-Ag2O 20 and CH-Ag2O 60 mg, were prepared. Antimicrobial activity was performed against Porphyromonas gingivalis (ATCC#33277) and Fusobacterium nucleatum (ATCC#25586) using the agar dilution method. Moreover, the cytotoxicity assay was performed on human gingival fibroblasts (HGF) by the use of the MTT method. The obtained data were analyzed with descriptive methods, one-way ANOVA, and Tukey's LSD tests.

RESULTS

The antibacterial activity of both composites was higher than both CH and Ag2O, and the greatest antibacterial properties were presented in CH-Ag2O 60. In all three measurements (24, 48, and 72 h), the greatest cytotoxicity was seen in Ag2O, followed by CH, CH-Ag2O 20, and CHAg2O 60 in descending order, respectively. The cytotoxicity of these components was related to the concentration and not to the time of exposure. The results showed that Ag2O in 3.7 and 7.5 μg/ml concentrations and CH-containing groups in 250 and 500 μg/ml were toxic to the cultured HGF.

CONCLUSION

The experimental composite containing CH-Ag2O 60 showed the greatest antibacterial properties against two periodontal pathogens evaluated. In order to clarify the clinical significance of composite cytotoxicity, further clinical studies are necessary.

Oral Health and Behavior Patterns of Women with Eating Disorders-A Clinical Pilot Study

BACKGROUND

Chronic stomach regurgitation associated with eating disorders (EDs) poses a high risk for tooth erosion. This study investigated oral health conditions, behavioral patterns, and tooth erosion in women with EDs.

METHODS

16 ED and 13 healthy women were enrolled; 14 ED and 10 healthy control subjects completed the study. Subjects completed demographic, medical, oral, and behavioral health history questionnaires. Dental caries status was recorded as Decayed, Missing and Filled Teeth (DMFT)index and the severity of tooth erosion as Basic Erosive Wear Examination (BEWE) scores. Saliva was collected for flow rate, pH, and buffering capacity analysis.

RESULTS

The ED group had a lower stimulated saliva flow rate and higher DMFT index but no significant difference in BEWE scores compared to the controls (t-test, significance level 0.05). Five of the fourteen ED subjects exhibited extensive tooth erosion, which may have been exacerbated by their tooth-brushing behavior.

CONCLUSIONS

Although some ED subjects showed extensive tooth erosion in this pilot study, the average BEWE score of the ED group was not significantly different from the controls. Extensive tooth erosion in ED may relate to the low stimulated salivary flow. A larger-scale clinical study is necessary to validate these results.

Formulation and antibacterial properties of lollipops containing of chitosan- zinc oxide nano particles on planktonic and biofilm forms of Streptococcus mutans and Lactobacillus acidophilus

This study aimed to formulate and characterize the experimental lollipops containing chitosan- zinc oxide nanoparticles (CH-ZnO NPs) and investigate their antimicrobial effects against some cariogenic bacteria. The CH-ZnO NPs were synthesized and characterized by X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR) analysis, and Transmission electron microscope (TEM). Then, four groups were made, including lollipops coated with 2 and 4 ml of CH-ZnO NPs, 0.7 ml CH-ZnO NPs incorporated lollipops, and those with no CH-ZnO NPs. Their antibacterial effectiveness against Streptococcus mutans and Lactobacillus acidophilus was evaluated by direct contact test and tissue culture plate method in planktonic and biofilm phases, respectively. Chlorhexidine mouthrinse (CHX) was used as a positive control group. In the planktonic phase, the antibacterial properties of both groups coated with CH-ZnO NPs were comparable and significantly higher than incorporated ones. There was no significant difference between CHX and the lollipops coated with 4 ml of NPs against S. mutans and CHX and two coated groups against L. acidophilus. None of the experimental lollipops in the biofilm phase could reduce both bacteria counts. The experimental lollipops coated with 2 and 4 ml of CH-ZnO NPs could reveal favorable antimicrobial properties against two cariogenic bacteria in the planktonic phase.

Interaction between Hexametaphosphate, Other Active Ingredients of Toothpastes, and Erosion-Abrasion in Enamel in vitro

Sodium hexametaphosphate (HMP) as toothpaste additive is claimed to reduce erosive tooth wear and to stabilize stannous ions. However, little is known about the impact of concentration and its interactions with fluoride (F) or stannous+fluoride ions (F/Sn) on enamel erosion and erosion-abrasion. In a 10 day cyclic in vitro erosion-abrasion model, 320 flat human enamel specimens were divided into ten groups (n = 32 each) and daily subjected to six erosive challenges (0.5% citric acid, 2 min) and two toothpaste suspension applications (2 min, 1:3 F-free toothpaste:mineral-salt solution, 0.23% sodium gluconate). Half of specimens per group were additionally brushed twice/day (200 g, 15 s) during suspension immersion. Nine suspensions contained HMP (0.25%, 1.75%, 3.25%), either on its own or combined with F (373 ppm F-) or F/Sn (800 ppm Sn2+, 373 ppm F-). One suspension contained sodium gluconate only (NegContr). After 10 days, specimens' surfaces were analysed with profilometry, energy dispersive X-ray spectroscopy, and scanning electron microscopy. Tissue loss (µm, mean ± standard deviation) in NegContr was 10.9 ± 2.0 (erosion), 22.2 ± 1.6 (erosion-abrasion). Under erosive conditions, only 0.25% HMP in any combination and 1.75% HMP with F/Sn reduced loss significantly (-28% to -54%); 3.25% HMP without F and F/Sn increased loss significantly (+35%). With additional abrasion, no suspension reduced loss significantly compared to NegContr, instead, in groups without F and F/Sn or with 3.25% HMP loss was increased (+15% to +30%). Conclusively, at higher concentrations, HMP increased erosive tooth wear and seemed to reduce anti-erosive effects of fluoride and stannous ions.

In vitro study on the preventive effect of children's toothpastes on erosive tooth wear of primary bovine enamel and dentin

This in vitro study aimed to analyse the effect of various children's toothpastes on erosive tooth wear of primary bovine enamel and dentin. Enamel and dentin specimens (n = 12) were cyclically eroded (6 × 60 s/d, citric acid, pH 2.4) and brushed (2 × 15 s/d, 2 N) over 5 days. Nine fluoride toothpastes (500 to 1450 ppm) and eight toothpastes containing no fluoride or other active ingredients (hydroxyapatite and/or xylitol) were tested. Unbrushed specimens served as control. Tissue loss was quantified using widefield confocal microscopy and statistically analysed using two-way and one-way ANOVAs followed by Scheffe's (enamel) or Tamhane's (dentin) post-hoc tests (p < 0.05). Only one fluoride toothpaste (1400 ppm) was able to reduce erosive wear of enamel significantly by 15% compared to the control (p_adj. = 0.002). All fluoridated toothpastes reduced dentin surface loss significantly by 32 to 69% compared to the control (p_adj. ≤ 0.001), while fluoride-free toothpastes were unable to reduce dentin loss significantly (p_adj. ≥ 0.971). Most fluoridated toothpastes caused less erosive wear compared to fluoride-free toothpastes. Children toothpastes containing fluoride were more effective in reducing erosive wear compared to toothpastes containing no fluoride or other active ingredients.

Biomimetic Action of Zinc Hydroxyapatite on Remineralization of Enamel and Dentin: A Review

Biomimetic zinc-carbonate hydroxyapatite technology was developed to realize materials that mimic the natural hydroxyapatite of enamel and dentin and possess good activity in terms of affinity to adhere to these biological tissues. The chemical and physical characteristics of this active ingredient allows the hydroxyapatite itself to be particularly similar to dental hydroxyapatite, enhancing the bond between biomimetic hydroxyapatite and dental hydroxyapatite. The aim of this review is to assess the efficacy of this technology in terms of benefits for enamel and dentin and reduction of dental hypersensitivity.

MATERIALS AND METHODS

A literature search (Pubmed/MEDLINE and Scopus) of articles from 2003 to 2023 was conducted to analyze studies focused on the use of zinc-hydroxyapatite products. Duplicates were eliminated from the 5065 articles found, leaving 2076 articles. Of these, 30 articles were analyzed based on the use of products with zinc-carbonate hydroxyapatite in these studies.

RESULTS

30 articles were included. Most of the studies showed benefits in terms of remineralization and prevention of enamel demineralization in terms of occlusion of the dentinal tubules and reduction of dentinal hypersensitivity.

CONCLUSION

Oral care products such as toothpaste and mouthwash with biomimetic zinc-carbonate hydroxyapatite were shown to provide benefits according to the aims of this review.

Effects of the application timing of anti-erosive agents on dentin erosion

This in vitro study aimed to evaluate the effects of the application timing of anti-erosive agents on dentin erosion. Eighty dentin specimens with dimensions of 2 × 2 × 2 mm were prepared and randomly divided into 4 groups based on the treatment solutions: 1.23 × 104 μg/ml sodium fluoride (NaF), 120 μg/ml chlorhexidine (CHX), 300 μg/ml quercetin (QUE), and deionized water (DW, negative control). The specimens in each group were further divided into 2 subgroups according to the application timing of the treatment solutions (n = 10): before the erosive challenges (PRE) and after the erosive challenges (POST). All specimens were submitted to 4 daily erosive challenges for 5 d. For each erosive challenge, the specimens in the subgroup PRE were treated with the respective solutions for 2 min and then immersed in cola drinks for 5 min, while the specimens in the subgroup POST were immersed in cola drinks for 5 min followed by treatment with the respective solutions for 2 min. The erosive dentin loss (EDL) was measured using a contact profilometer, and the surface morphology of the dentin specimens was evaluated by scanning electron microscopy at the end of the experiment. The data were statistically analyzed using two-way analysis of variance (ANOVA) and Bonferroni's test (α = 0.05). Significantly less EDL was observed in the groups NaF, CHX, and QUE than in the group DW (all P < 0.001). Significantly lower EDL was observed in the groups CHX and QUE than in the group NaF (P = 0.001 and P < 0.001, respectively). For CHX, subgroup POST exhibited significantly less EDL than subgroup PRE (P < 0.001). Regarding QUE, subgroup PRE showed significantly less EDL than subgroup POST (P < 0.001). Furthermore, a relatively greater number of obliterated dentinal tubules was visible in the subgroup POST rather than in the subgroup PRE of the group CHX, while in the group QUE, narrower dentinal tubules were observed in the subgroup PRE than those in subgroup POST. In conclusion, CHX and QUE showed the best performance in controlling dentin erosion. CHX was more effective in reducing EDL when applied after erosive challenges, whereas QUE worked more effectively when used before erosive attacks. The application timing should be considered when evaluating the effects of anti-erosive agents because it may determine their effectiveness.

Influence of hydroxyapatite nanoparticles on the formation of calcium fluoride surface layer on enamel and dentine in vitro

Topical application of different fluoride preparations is considered to be the gold standard of oral prophylaxis measures in preventive dentistry. Hydroxyapatite nanoparticles (nano-HAP) as well, have received considerable attention for dental use in the past few decades. The purpose of this in-vitro study was to analyze the interaction between nano-HAP and different fluoride preparations. In order to investigate the possibility to establish, in the presence of nano-HAP, reproducible calcium fluoride surface layers, specimens were visually examined with regard to the surface coverage's structure, morphology, homogeneity and stability. Test series based on enamel and dentine specimens, that were obtained from extracted bovine teeth, were conducted. Thereby, sodium fluoride, olaflur, elmex Fluid (10.000 ppm) and an aqueous nano-HAP solution (5%) served as test products and sterile water as reference. First, single application of nano- HAP and fluoride was tested. After 5 min of incubation in the test solution, the surface coverage was examined by scanning electron microscopy (SEM). Furthermore, samples were determined by energy dispersive X-ray spectroscopy (EDX) to identify the present elements of the surface layer, particularly fluoride. To test the calcium fluoride layer's persistence and stability, samples were exposed to the spray of a dental multifunctional syringe for 20 s using maximum pressure and maximum water supply. In the second application protocol, fluoride and nano-HAP were applied simultaneously and in the third application protocol they were used sequentially. SEM visualisation showed that the simultaneous or sequential addition of nano-HAP led to a distinct change in the surface layer's structure. Agglomerates of various sizes were formed, with obviously different morphology from the calcium fluoride globules, not covering the surface homogeneously and sprayed off with the multifunctional syringe easily. Application of pure fluoride compounds resulted in a more homogeneous calcium fluoride surface layer with higher persistence in comparison to the combination of fluoride and nano-HAP. Interaction between fluoride and nano-HAP clearly could be proved. On enamel as well as dentine surfaces, the combined application of nano-HAP and fluoride has a negative effect on the stability and persistence of the calcium fluoride surface precipitate.

Remineralization of Artificially Demineralized Human Enamel and Dentin Samples by Zinc-Carbonate Hydroxyapatite Nanocrystals

(1) Background: Decalcified enamel and dentin surfaces can be regenerated with non-fluoride-containing biomimetic systems. This study aimed to investigate the effect of a zinc carbonate-hydroxyapatite-containing dentifrice on artificially demineralized enamel and dentin surfaces. (2) Methods: Human enamel and dentin discs were prepared and subjected to surface demineralization with 30% orthophosphoric acid for 60 s. Subsequently, in the test group (n = 20), the discs were treated three times a day for 3 min with a zinc carbonate-hydroxyapatite-containing toothpaste (biorepair^®). Afterwards, all samples were gently rinsed with PBS (5 s) and stored in artificial saliva until next use. Samples from the control group (n = 20) received no dentifrice-treatment and were stored in artificial saliva, exclusively. After 15 days of daily treatment, specimens were subjected to Raman spectroscopy, energy-dispersive X-ray micro-analysis (EDX), white-light interferometry, and profilometry. (3) Results: Raman spectroscopy and white-light interferometry revealed no significant differences compared to the untreated controls. EDX analysis showed calcium phosphate and silicon dioxide precipitations on treated dentin samples. In addition, treated dentin surfaces showed significant reduced roughness values. (4) Conclusions: Treatment with biorepair^® did not affect enamel surfaces as proposed. Minor mineral precipitation and a reduction in surface roughness were detected among dentin surfaces only.

Film-Forming Polymers for Tooth Erosion Prevention

Different agents have been proposed to prevent the progression of acid induced dental substance losses, which are called erosive tooth wear (ETW), such as fluorides, calcium, and phosphate-based products; however, there is a need for a further increase in efficacy. Recently, the ability of polymers to interact with the tooth surface, forming acid resistant films, has come into the focus of research; nevertheless, there is still the need for a better understanding of their mode of action. Thus, this article provides an overview of the chemical structure of polymers, their mode of action, as well as the effect of their incorporation into oral care products, acid beverages, and antacid formulations, targeting the prevention of ETW. Recent evidence indicates that this may be a promising approach, however, additional studies are needed to confirm their efficacy under more relevant clinical conditions that consider salivary parameters such as flow rate, composition, and clearance. The standardization of methodological procedures such as acid challenge, treatment duration, and combination with fluorides is necessary to allow further comparisons between studies. In conclusion, film-forming polymers may be a promising cost-effective approach to prevent and control erosive demineralization of the dental hard tissue.

Remineralization and protection from demineralization: effects of a hydroxyapatite-containing, a fluoride-containing and a fluoride- and hydroxyapatite-free toothpaste on human enamel in vitro

Background

The aim was to evaluate the remineralization potential as well as the extent of protection against renewed demineralization of enamel by hydroxyapatite-containing toothpaste (Karex) in comparison to fluoride-containing (Elmex) and fluoride- and hydroxyapatite-free toothpaste (Ajona) as control.

Methods

Fifty-seven enamel samples were obtained from 19 human teeth. Five demarcated surfaces were created on each tooth (S0—S4). Four of the surfaces (S1—S4) were exposed to lactic acid (pH 3) for 8 h (demineralization). S0 was left untreated as control. S1 was solely treated with acid. After demineralization, S2 was exposed to Karex for 2 min, of which 15 s were brushing. S3 was treated with Elmex and S4 with Ajona, accordingly. Then, the samples were evaluated using a scanning electron microscope and ImageJ image analysis software to determine the percentage of demineralization. Afterwards, S2-S4 were again exposed to lactic acid for 2 h, and subjected to pixel analysis another time. Data were statistically analysed using ANOVA with post-hoc Scheffé test and the Kurskal-Wallis test.

Results

The surfaces treated with Elmex showed the lowest percentage of demineralization (mean 5.01 ± 0.98%) (p < 0.01). Thus, Elmex remineralized more effectively compared to Ajona (8.89 ± 1.41%) and Karex (9.85 ± 1.63%) (p < 0.01). Furthermore, Elmex showed the lowest percentage of demineralized enamel after new demineralization (median 6.29%), followed by Ajona (11.92%) and Karex (13.46%) (p < 0.001).

Conclusion

In terms of remineralization and protection against renewed demineralization, a hydroxyapatite-containing toothpaste (Karex) appears to be inferior to a fluoride-containing toothpaste (Elmex) and a fluoride- and hydroxyapatite-free toothpaste (Ajona). Hence, the recommendation to use Karex to protect against demineralization should be critically questioned.

In vitro evaluation of the effects of different particle types in toothpastes on the efficacy against enamel erosion and wear

The effects of the particle fraction in toothpastes in the context of erosion and erosive tooth wear has not been fully elucidated. Thus, aim of this study was to investigate experimental toothpastes, each with one specific particle type. Toothpastes with seven different types of silica or alumina were prepared as slurry either with or without active ingredients (NaF or F/Sn). Human enamel samples were exposed to a cyclic erosion/abrasion model, and were either treated with the respective slurries only or additionally brushed in a brushing machine. Tissue loss was profilometrically monitored. After treatment with slurries without active ingredients or with NaF, tissue loss increased significantly within groups over time (p < 0.001 each). At the end of the trial, there were minor differences between groups (not exceeding 10-20%; p > 0.05 for most comparisons). After treatment with the F/Sn slurries, tissue loss stagnated completely over time, with the exception of one silica type and alumina, but both still reduced tissue loss by 40-50% (compared to control p < 0.001 each). Relative to the type of the active ingredient, the particle type seems to be a secondary factor for the efficacy of toothpastes on erosion and erosive tooth wear in enamel.

Evaluation of the changes in physical properties and mineral content of enamel exposed to radiation after treating with remineralization agent

OBJECTIVE

The aim of this study was to investigate the effect of different remineralization agents on the physical properties and elemental content of enamel exposed to radiation.

MATERIAL AND METHOD

The enamel surfaces of impacted third molar teeth were prepared, and six study groups were created (n = 6). Next, 60 Gy radiation was applied to each group. Between applications, each group except for the control group was treated with a different remineralization agent (sodium fluoride, casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), casein phosphopeptide amorphous calcium phosphate with fluorite (CPP-ACFP), bioactive glass, or chitosan). The results were evaluated in terms of pre- and post-radiation values and the difference between the two. The paired-samples t test and analysis of variance test were used in the analysis of normally distributed hardness and roughness values, while Wilcoxon's signed ranks test, and the Kruskal Wallis and Mann-Whitney U tests were used in the analysis of elemental content without normal distribution.

RESULTS

A statistically significant decrease was observed in microhardness measurements in all groups. Intragroup evaluation revealed a statistically significant difference between the NaF and bioactive glass groups (p < 0.05). No significant difference was observed between the groups' roughness measurements (p < 0.05). Intergroup evaluation of surface roughness revealed a significant difference in the CPP-ACFP and chitosan groups (p < 0.05). Pre- and post-radiation oxygen, magnesium, and potassium levels and Ca/P ratios also differed significantly (p < 0.05).

CONCLUSION

Radiation caused a statistically significant difference in the microhardness and elemental content of enamel. However, no significant difference was observed in enamel roughness. The applied remineralizing agents have a partial ameliorating effect on the adverse impacts of radiation.

CLINICAL RELEVANCE

Radiation causes changes in the mechanical properties and elemental content of tooth enamel. Remineralizing agent application is a promising option in reducing the adverse effects of irradiation.

The protective effect of the experimental TiF4 and chitosan toothpaste on erosive tooth wear in vitro

This study evaluated the protective effect of TiF₄ and chitosan toothpaste on erosive tooth wear (ETW) in vitro. Enamel and dentin samples were randomly assigned to toothpastes (n = 12): (G1) TiF₄ (1400 ppm F⁻), (G2) 0.5% chitosan (75% deacetylation, 500 mPas), (G3) TiF₄ (1400 ppm F⁻) plus 0.5% chitosan (75% deacetylation, 500 mPas), (G4) Placebo, (G5) Erosion Protection (Elmex-GABA, 1400 ppm F⁻). Twelve samples were only eroded. All samples were submitted to erosive pH cycles and G1 to G5 to abrasive challenges using toothpastes’ slurries plus 45 s of treatment, for 7 days. The final profile was overlaid to the baseline one for the ETW calculation (µm). The data were subjected to Kruskal–Wallis/Dunn tests. TiF₄ toothpastes, regardless of the presence of chitosan, were able to significantly reduce ETW compared to placebo, while chitosan alone was similar to placebo for both tissues. The toothpastes containing TiF₄ were even superior to the commercial Elmex toothpaste on enamel, while they were similar on dentin; both were also significantly different from placebo for both tissues. TiF₄ and Elmex toothpastes minimized the impact of brushing on eroded surface. In conclusion, TiF₄ toothpastes, regardless the presence of chitosan, showed to be effective in minimizing ETW in vitro.

Prevention of Caries and Dental Erosion by Fluorides-A Critical Discussion Based on Physico-Chemical Data and Principles

Dental erosion is a common problem in dentistry. It is defined as the loss of tooth mineral by the attack of acids that do not result from caries. From a physico-chemical point of view, the nature of the corroding acids only plays a minor role. A protective effect of fluorides, to prevent caries and dental erosion, is frequently claimed in the literature. The proposed modes of action of fluorides include, for example, the formation of an acid-resistant fluoride-rich surface layer and a fluoride-induced surface hardening of the tooth surface. We performed a comprehensive literature study on the available data on the interaction between fluoride and tooth surfaces (e.g., by toothpastes or mouthwashes). These data are discussed in the light of general chemical considerations on fluoride incorporation and the acid solubility of teeth. The analytical techniques available to address this question are presented and discussed with respect to their capabilities. In summary, the amount of fluoride that is incorporated into teeth is very low (a few µg mm-2), and is unlikely to protect a tooth against an attack by acids, be it from acidic agents (erosion) or from acid-producing cariogenic bacteria.

Reduction in erosive tooth wear using stannous fluoride-containing dentifrices: a meta-analysis

Dentifrices containing different active agents may be helpful to allow rehardening and to increase the resistance of the eroded surface to further acids or mechanical impacts. This study aimed to compare the effects of conventional (sodium fluoride [NaF]) and stannous fluoride (SnF2)-containing dentifrices on reducing erosive tooth wear (ETW). The PubMed/MEDLINE, Scopus, LILACS, BBO, EMBASE, TRIP electronic databases, and grey literature were searched until January 2021 to retrieve relevant in vitro and in situ studies related to research question. There were no restrictions on publication year or language. Two authors independently selected the studies, extracted the data, and assessed the risk of bias. ETW data were pooled to calculate and compare both dentifrices (overall analysis) and in vitro and in situ studies separately (subgroup analysis). Statistical analyses were performed using RevMan5.3 with a random effects model. Of 820 potentially eligible studies, 101 were selected for full-text analysis, and 8 were included in the systematic review and meta-analysis. There was a significant difference between SnF2-containing dentifrices and NaF dentifrices only for in vitro studies (p=0.04), showing a higher effect of the SnF2-containing dentifrices against the erosion/abrasion (effect size: -6.80 95%CI: -13.42; -0.19). Most in vitro and in situ studies had high and low risk of bias, respectively. In vitro literature suggests that the ETW reduction is greater when using SnF2-containing dentifrices instead NaF-containing dentifrices. However, the evidence level is insufficient for definitive conclusions. Clinical trials are necessary for a better understanding of the effect of these compounds on ETW.

Biomineralization induced by chitosan and collagen-based materials with fluoride for dentin coverage: Chemical and morphological analysis

The prevention and treatment of erosive tooth wear are becoming increasingly important due to its increasing prevalence. The use of natural solutions to modify dental surfaces has become an area of research. Organic materials such as chitosan and hydrolyzed collagen may be a promising option to treat dentin. This in vitro study aimed to evaluate the influence of chitosan or hydrolyzed collagen, alone or combined with acidulated phosphate fluoride (APF) gel, on the composition and morphology of dentin after erosion. Bovine dentin samples were prepared (n = 84) and treated with artificial saliva (AS, negative control); APF gel (F, positive control); chitosan solution (Chi); hydrolyzed collagen solution (Col); fluoride/chitosan composition (F_Chi); and fluoride/hydrolyzed collagen composition (F_Col). Erosive cycles (six cycles of immersion in orange juice for 1 min, followed by immersion in AS for 1 hr) were performed. The materials were characterized by their morphology, composition, and particle size distribution. Micro-energy dispersive X-ray fluorescence spectroscopy and scanning electron were used to evaluate the dentin's inorganic chemical composition and morphology. The F_Col and F groups had a reduction in calcium loss by 17 and 26%, respectively (p < .001). Both of these groups still had a covering layer of agglomerates at the dentin surface after the erosive cycles. The fluoridated chitosan or collagen solutions improved the dentin resistance to erosion as a novel hybrid-fluoride-based material approach to provide surface protection from erosion.

In-office tooth bleaching with chitosan-enriched hydrogen peroxide gels: in vitro results

OBJECTIVE

This study aimed to evaluate the effects of adding chitosan to 35% hydrogen peroxide gels (for in-office bleaching), with or without calcium gluconate, on tooth properties and bleaching efficacy.

METHODS

Bovine enamel/dentin specimens (4 × 4 × 2.5 mm) were randomly allocated into groups (n = 10): negative control (unbleached), bleaching with 35% hydrogen peroxide gel (35% HP, commercial gel); 35% HP with 2% chitosan (% wt) (35% HP + chitosan), 35% HP and calcium (35% HP + Ca, commercial gel), and 35% HP + Ca + 2% chitosan. Variation of surface profile (ΔRa) and color analyses (ΔL*, Δa*, Δb*, ΔE*_ab, ΔE₀₀, and ΔWID) were performed comparing specimens at baseline (initial) and 24 h after of storage in artificial saliva (final). Surface microhardness (KHN) values and scanning electron microscopy (SEM) images were obtained on conclusion. The data were analyzed by ANOVA and Tukey's tests (KHN), generalized linear models (ΔL*, ΔE_ab, ΔE₀₀, ΔWID, ΔRa), and Kruskal-Wallis and Dunn tests (Δa*, Δb*) (α = 0.05).

RESULTS

Considering ΔL*, Δa*, Δb*, ΔE*_ab, ΔE₀₀, and ΔWID values, the bleached groups differed from negative control. For ΔRa, chitosan-based groups showed lower variation in surface roughness compared to 35% HP, without significant difference from negative control. For KHN, chitosan groups did not differ from negative control (unbleached control = chitosan groups > 35% HP + Ca > 35% HP). For SEM, slight surface changes were observed in all bleached groups, but the intensity varied according to gel used (35% HP > gels with Ca > gels with chitosan).

CONCLUSION

Chitosan-enriched hydrogen peroxide gels can reduce negative impacts on tooth properties without affecting bleaching efficacy.

CLINICAL RELEVANCE

Although commercial gels containing remineralizing agents such as calcium reduce the negative effects on the properties of teeth, the addition of chitosan appears to be a promising approach to preservation of dental properties without interfering in bleaching efficacy.

Effect of tooth bleaching and application of different dentifrices on enamel properties under normal and hyposalivation conditions: an in situ study

OBJECTIVE

The purpose of this in situ study was to evaluate different dentifrices on enamel after bleaching under normal and hyposalivatory conditions.

MATERIALS AND METHODS

Twenty-four participants were assigned of which 12 had normal and 12 had low salivary flow. The study was conducted in 6 in situ experimental phases of 24 h duration: placebo, NaF, SnF₂, F/Sn/Chitosan, F/Arginine, and F/Bioactive Glass. The specimens were previously bleached in vitro. Microhardness (SMH), roughness (Ra), and color analyses (CIELAB and ΔE₀₀) were performed at baseline (T1), after bleaching (T2) and after in situ phase (T3). Scanning electron microscopy (SEM) and the elemental levels (wt%) of Ca, P, and Na and the proportion between Ca and P were determined using an energy-dispersive X-ray spectrometer (EDS) in T3. The SMH and Ra were analyzed by mixed models for repeated measures and Tukey Kramer. The color and Na% were analyzed by split-plot ANOVA and Tukey test. The EDS were analyzed by Mann's Whitney nonparametric, Friedman, and Nemenyi tests (p<0.05).

RESULTS

The dentifrices placebo and NaF in the low flow presented lower SMH and higher Ra in T3 and lower Ca% compared to the same dentifrices in normal flow. For normal flow, SnF₂ resulted in greater SMH. For low flow, SnF₂, F/Sn/Chitosan, and F/Bioactive Glass resulted in higher SMH in T3 and did not differ from T1. F/Bioactive Glass showed lower Ra among the dentifrices evaluated for both salivary flows, whereas SnF₂ showed the highest. F/Bioactive Glass showed a statistically significant difference from placebo for Ca%, P%, Na%. For ΔE^*_ab and ΔE₀₀ (T1×T3), no differences were found for the dentifrices and salivary flows.

CONCLUSION

The low salivary flow had less capacity for remineralization of bleached enamel compared to normal flow. Overall, the dentifrice with bioactive glass had the best performance in bleached enamel under low and normal salivary flow condition.

CLINICAL RELEVANCE

It is recommended to use a bioactive glass-based dentifrice after bleaching to promote tooth enamel recovery for patients with or without impaired salivary flow.

Protective effect of calcium silicate toothpaste on enamel erosion and abrasion in vitro

Objectives

To compare in vitro the effect of a toothpaste containing fluoride (F), calcium silicate (CaSi) and sodium phosphate salts to conventional toothpaste (NaF) on human enamel specimens submitted to erosive and abrasive challenges.

Methods

48 sound and 48 enamel samples pre-treated with 1% citric acid were divided into 4 groups (n = 12): Group 1- Non-fluoride toothpaste; Group 2- NaF toothpaste (1450 ppmF); Group 3- CaSi toothpaste (1450 ppmF; MFP); Group 4- Erosion only. The samples were subjected to pH cycling (3 cycles/day; 90s; 1% citric acid, pH 3.6) and to abrasion for 7 days. After the 1^st and the last cycle, they were submitted to abrasion (15s, 1.5N load), using a brushing machine, soft toothbrush and toothpaste slurry (1:3; 15ml/sample) and then immersed in the slurry for 45s. Samples were immersed in artificial saliva between the challenges. Enamel loss was evaluated using profilometry on days 3 and 7. Data were analysed by ANOVA and Tukey's test (p < 0.05).

Results

For sound enamel at baseline, mean (±SD) enamel loss (μm) for groups 1-4 on day 3 was 2.15 ± 0.35^a, 1.20 ± 0.22^b, 0.95 ± 0.19^b and 1.98 ± 0.32^a; on day 7 was 3.05 ± 0.40^a, 2.07 ± 0.32^b, 1.36 ± 0.33^c and 3.69 ± 0.27^d respectively. For acid-softened enamel at baseline, enamel loss on day 3 was 3.16 ± 0.19^a, 2.17 ± 0.14^b, 1.70 ± 0.11^c and 3.04 ± 0.19^a; on day 7 was 3.92 ± 0.25^a, 3.07 ± 0.13^b, 2.09 ± 0.15^c and 3.87 ± 0.25^a respectively.

Conclusions

Both F toothpastes led to significantly higher enamel protection from short-term erosion and abrasion in comparison to the non-F toothpaste and erosion only. In the longer term, CaSi toothpaste conferred significantly higher protection than NaF toothpaste.

Clinical significance

The results showed that for the longer term the CaSi toothpaste provided significantly higher protection than the NaF toothpaste, which indicates a good potential of the former to help prevent erosive tooth wear.

Protective effect of anti-erosive solutions enhanced by an aminomethacrylate copolymer

OBJECTIVE

To investigate if an aminomethacrylate copolymer (AMC) could potentiate the anti-erosive effect of solutions containing sodium fluoride -F (225 ppm F^-) and sodium fluoride associated to stannous chloride -FS (800 ppm Sn²⁺).

METHODS

The experimental solutions (F, FS, AMC, AMC + F, AMC + FS, and deionized water-DW as negative control) were tested in the presence of acquired pellicle. Polished bovine enamel specimens (n = 13/group) were submitted to an erosion-rehardening cycle (2 h immersion in human saliva, 5 min in 0.3 % citric acid, 1 h in human saliva, 4×/day, 5 days). Treatment with the solutions was performed for 2 min, 2×/day. The rehardening (%Re) and protective (%Prot) potential of the solutions were assessed in the beginning of the experiment, and the surface loss (SL) by contact profilometry after 5 days. Additional bovine specimens (n = 5/group) were prepared to evaluate the contact angle on the treated enamel surface. The zeta potential of the dispersed hydroxyapatite (HA) crystals after the treatment with the solutions was also measured (n = 3/group). Data were statistically analyzed (α = 0.05).

RESULTS

The association with AMC improved the %Re and the %Prot for W and F, but not for FS. The results of SL were: AMC + F = AMC + FS < AMC < FS < F < DW. The presence of AMC significantly reduced the contact angle on enamel surfaces. The HA presented a strong negative surface charge after the treatment with DW, F and FS, whereas after the treatment with the solutions containing AMC it became positive.

CONCLUSION

AMC has potential to enhance the anti-erosive effect of fluoride solutions.

CLINICAL SIGNIFICANCE

The aminomethacrylate copolymer (AMC) may be a promising agent to be added to oral care products for the prevention of erosive tooth wear.

The Addition of Propylene Glycol Alginate to a Fluoride Solution to Control Enamel Wear: An in situ Study

The aim of this study was to evaluate the protective effect of propylene glycol alginate (PGA) associated with sodium fluoride (NaF) against enamel erosion and erosion-abrasion. A 4-phase, split-mouth, double-blind, crossover in situ trial was conducted with the following solutions: F + PGA (225 ppm F- + 0.1% PGA), F (225 ppm F-), F + Sn (225 ppm F- + SnCl2, 800 ppm Sn2+), and negative control (distilled water). In each phase, 12 subjects wore removable mandibular appliances containing 4 enamel specimens, which were submitted either to erosion or to erosion-abrasion challenges for 5 days. Acquired salivary pellicle was formed in situ for 2 h. Erosion-abrasion consisted of acid challenge (1% citric acid solution, pH 2.3, 5 min, 4×/day), exposure to saliva in situ (2 h, 4×/day), brushing (5 s, total 2 min exposure to the slurry), and treatment with the solutions (2 min, 2×/day). For erosion, the same procedures were performed, without brushing. At the end, surface loss (SL; in μm) was evaluated by means of optical profilometry. KOH-soluble fluoride was quantified for erosion-only groups using extra specimens. For both challenges, the SL values found for F + PGA did not differ significantly from those of F and the negative control, and the SL value shown for F + Sn was significantly the lowest. Erosion-abrasion promoted significantly higher SL values than erosion. KOH-soluble fluoride analysis showed that F + Sn had a higher fluoride concentration in comparison with the negative control and F, while F + PGA did not differ from any of the other groups. In conclusion, PGA was not able to improve the protective effect of NaF against erosive enamel wear.

Effect of chitosan solutions with or without fluoride on the protection against dentin erosion in vitro

The aim of this study was to assess the protective effect of experimental solutions containing chitosan at different viscosities with or without fluoride (TiF₄ /NaF) on dentin loss in vitro. Bovine dentin samples (n = 15) were prepared and allocated to one of the following treatments: (i) 0.5% chitosan (500 mPas); (ii) 0.5% chitosan (2,000 mPas); (iii) 0.042% NaF and 0.049% TiF₄ ; (iv) as (iii) with addition of 0.5% chitosan (500 mPas); (v) as (iii) with addition of 0.5% chitosan (2,000 mPas); (vi) commercial solution with SnCl₂ /AmF/NaF (positive control); or (vii) deionized water (negative control). The samples were submitted to pH cycling for 7 d (0.1% citric acid, 4 × 90 s d^-1 ). The treatment was applied once a day for 30 s. The dentin loss was quantified using a contact profilometer. Three samples per group were evaluated using scanning electron microscopy. The dentin loss (μm) was submitted to anova and Tukey's test for differences between treatments. Among the treatments tested, only chitosan 500 mPas was able to statistically significantly reduce the dentin loss compared to the negative control, being similar to the positive control. TiF₄ /NaF, whether with or without chitosan, had no protective effect. Chitosan 500 mPas and SnCl₂ /AmF/NaF solutions have comparable protective effect against dentin erosion in vitro.

Enhancing the Anti-Erosive Properties of Fluoride and Stannous with the Polymer Carbopol

This in vitro study investigated whether Carbopol 980 polymer could potentiate the anti-erosive effect of solutions containing sodium fluoride (F) and sodium fluoride associated with stannous chloride (FS). The dissolution of hydroxyapatite treated with the experimental solutions (F [500 ppm F-], F + Carbopol [0.1%], FS [500 ppm F- + 800 ppm Sn2+], FS + Carbopol) was evaluated. Deionized water was the negative control, and a commercial mouth rinse (AmF/NaF/SnCl2; 500 ppm F + 800 ppm Sn2+; Elmex® Erosion Protection) was the positive control. The solutions were also evaluated in an erosion-rehardening protocol, with two treatments per day, using bovine enamel specimens (n = 15) and human saliva. The acid challenge was performed using 0.3% citric acid (pH 2.6) for 2 min. Microhardness was measured at different times: baseline, after the first erosive challenge, after treatment, and after the second erosive challenge. Based on microhardness values, the demineralization, rehardening, and protective potentials were calculated. The alkali-soluble fluoride on enamel surfaces was also measured. Data were analyzed using ANOVA and Tukey tests (α = 0.05). Groups treated with FS + Carbopol showed the lowest hydroxyapatite dissolution and the highest rehardening and protective potentials. The measurement of alkali-soluble fluoride on enamel surfaces was also higher in the FS + Carbopol group. Carbopol was able to significantly increase the protective effect of the fluoridated solutions in addition to optimizing the adsorption of fluoride on the enamel surface.

Role of desensitizing/whitening dentifrices in enamel wear

OBJECTIVES

To analyze the impact of desensitizing (D) and/or whitening (W) dentifrices on erosion and erosion-abrasion.

METHODS

Enamel specimens were allocated into 10 groups (n = 20): 1. Artificial saliva (control); 2. Sensodyne Repair&Protect (SRP-D); 3. Sensodyne Repair&Protect Whitening (SRP-W); 4. Colgate Sensitive Pro-Relief (CSPR-D); 5. Colgate Sensitive Pro-Relief Real White (CSPRR-W); 6. Colgate Total 12 (CT); 7. Colgate Total 12 Professional Whitening (CTP-W); 8. Sensodyne True White (ST-W); 9. Curaprox Black is White (CB-W); 10. Oral-B 3D White Perfection (OB3D-W). For abrasion (n = 10), 30,000 brushing strokes were performed and surface roughness (SR) was evaluated. Erosion-abrasion (n = 10) consisted of 1 % citric acid (2 min), artificial saliva (60 min); 6×/day; 5 days. Toothbrushing was carried out 2×/day (45 strokes). Surface loss (SL) was determined with an optical profilometer. Data were statistically analyzed (α = 0.05).

RESULTS

Relative to SR, only OB3D-W had a significantly rougher surface than the control (p = 0.014). SRP-D, CSPR-D and ST-W showed no difference from the baseline. High SL was observed for ST-W, OB3D-W and CTP-W, without significant differences from the control. CT showed the lowest SL, not differing from SRP-D and SRP-W. There was a weak negative correlation between SL and concentration of free fluoride in the slurries, SL and SR, and SL and pH, all p > 0.05.

CONCLUSIONS

Only one dentifrice increased surface roughness of enamel to a higher degree than brushing with saliva. Brushing with the test dentifrices did not cause higher enamel erosive wear than brushing with saliva.

CLINICAL SIGNIFICANCE

This study enhances our knowledge on the effect of desensitizing and whitening dentifrices, indicating that they do not worsen enamel loss due to abrasion and they might be a safe option for individuals with erosive tooth wear.

In vitro effect of children's toothpaste on brushing abrasion of eroded primary enamel

PURPOSE

Emerging data have suggested that acid erosion has become an increasing clinical problem in pediatric dentistry. This study aimed to investigate the abrasive effects of two commercial toothpastes on primary enamel eroded by orange juice using an in vitro model.

METHODS

Thirty enamel slabs were obtained from primary teeth and then randomly assigned to three groups (n = 8) comprising two different toothpastes: G1-control-distilled water; G2-Dentifrice A (containing no fluoride); and G3-Dentifrice B (1.100 ppmF-NaF). Each slab had one half protected to provide a control side, and the other one was subjected to treatments. The slabs were submitted to daily erosive challenges (3×/day, 2 min) in concentrated orange juice (pH 3.38) associated with abrasive challenges using a tooth-brushing machine (150 brush movements for each cycle). During the experimental period, the slabs were kept in 37 °C artificial saliva, and the experiment was carried out for 5 days. The depths of the resulting eroded areas were measured by stylus profilometry. The data were analyzed using ANOVA and the Tukey-Kramer test (α = 5%).

RESULTS

Tooth loss (µm, mean ± SD) was 2.46 ± 1.18 for G1, 3.32 ± 2.12 for G2 and 2.14 ± 1.03 for G3. Therefore, the NaF dentifrice (Dentifrice B) produced significantly less mineral loss (p = 0.04) than dentifrice A.

CONCLUSIONS

The findings suggest that fluoride toothpaste could protect primary enamel against erosion.

Injectable Biomaterials for Dental Tissue Regeneration

Injectable biomaterials scaffolds play a pivotal role for dental tissue regeneration, as such materials are highly applicable in the dental field, particularly when compared to pre-formed scaffolds. The defects in the maxilla-oral area are normally small, confined and sometimes hard to access. This narrative review describes different types of biomaterials for dental tissue regeneration, and also discusses the potential use of nanofibers for dental tissues. Various studies suggest that tissue engineering approaches involving the use of injectable biomaterials have the potential of restoring not only dental tissue function but also their biological purposes.

Modes of Action and Clinical Efficacy of Particulate Hydroxyapatite in Preventive Oral Health Care − State of the Art

Background:

Particulate Hydroxyapatite (HAP; Ca5(PO4)3(OH)) is being increasingly used as multifunctional active ingredient in oral care. Due to its high similarity to human enamel crystallites, it is considered as a biomimetic agent.

Objective:

The aim of this narrative review is to identify the modes of action of HAP in preventive oral health care based on published studies. The outcomes are expected to improve the understanding of the effects of HAP in the oral cavity and to provide a knowledge base for future research in the field of biomimetic oral care.

Methods:

The data analyzed and discussed are primarily based on selected published scientific studies and reviews fromin vivo,in situ, andin vitrostudies on HAP in the field of preventive oral health care. The databases Cochrane Library, EBSCO, PubMed and SciFinder were used for literature search.

Results:

We identified different modes of action of HAP in the oral cavity. They are mainly based on (I) Physical principles (e.g. attachment of HAP-particles to the tooth surface and cleaning properties), (II) Bio-chemical principles (e.g. source of calcium and phosphate ions under acidic conditions and formation of an interface between HAP-particles and the enamel), and (III) Biological principles (e.g. HAP-particles interacting with microorganisms).

Conclusion:

Although more mechanistic studies are needed, published data show that HAP has multiple modes of action in the oral cavity. Since the effects address a wide range of oral health problems, HAP is a biomimetic agent with a broad range of applications in preventive oral health care.

Effects of dentifrices on mechanical resistance of dentin and restorative materials after erosion and abrasion

The aim of this study was to evaluate the mechanical resistance of dentin and restorative materials submitted to erosive/abrasive challenges with different dentifrices. The dentin was restored using a resin-modified glass-ionomer (RMGIC) or a composite resin (RC). One hemiface of the sample was protected, and the other was subdivided according to the applied dentifrice (n = 10): without fluoride (SF), sodium fluoride (NaF) and stannous fluoride (SnF). The specimens were submitted to erosive/abrasive cycles, the varnish was removed, and the Martens hardness (HMV) and elastic modulus (Eit) were evaluated. The data were analyzed by repeated two-way ANOVA measurements and Tukey tests (alpha = 0.05). When analyzing the HMV on the test side, there was no influence of the dentifrices in the dentin; however, the orders of NaF < SnF = SF in RC and SnF > NaF = SF in RMGIC were observed. Comparing the treated surfaces, there were no differences in the dentin, and only the SF since CR presented an HMV superior to that of RMGIC. Comparing control and test sides, both dentins obtained a decreased HMV after the erosive/abrasive challenge; for the restorative materials, superior values were found only for SnF in the RMGIC. The Eit values were influenced more by the dentifrices on the test side for the dentin adjacent to the RMGIC, with the lowest values shown for the SF, and for both materials, the highest values were shown for the SnF group. No differences were found when comparing each dentin treated with the same dentifrice; however, the RMGIC presented a superior Eit than the CR when brushed with both dentifrices with a fluoride. Comparing the control and test sides, the same results were obtained for the HMV. The dentifrices showed little influence on the dentin substrate, whereas the dentifrice with SnF enhanced the mechanical properties of the restorative materials, which was more evident in the RMGIC.

Chitin/Chitosan: Versatile Ecological, Industrial, and Biomedical Applications

Chitin is a linear polysaccharide of N-acetylglucosamine, which is highly abundant in nature and mainly produced by marine crustaceans. Chitosan is obtained by hydrolytic deacetylation. Both polysaccharides are renewable resources, simply and cost-effectively extracted from waste material of fish industry, mainly crab and shrimp shells. Research over the past five decades has revealed that chitosan, in particular, possesses unique and useful characteristics such as chemical versatility, polyelectrolyte properties, gel- and film-forming ability, high adsorption capacity, antimicrobial and antioxidative properties, low toxicity, and biocompatibility and biodegradability features. A plethora of chemical chitosan derivatives have been synthesized yielding improved materials with suggested or effective applications in water treatment, biosensor engineering, agriculture, food processing and storage, textile additives, cosmetics fabrication, and in veterinary and human medicine. The number of studies in this research field has exploded particularly during the last two decades. Here, we review recent advances in utilizing chitosan and chitosan derivatives in different technical, agricultural, and biomedical fields.

Is the dentifrice containing calcium silicate, sodium phosphate, and fluoride able to protect enamel against chemical mechanical wear? An in situ/ex vivo study

OBJECTIVES

The aim of this study was to investigate the effect of a dentifrice that contains calcium silicate, sodium phosphate, and fluoride on erosive-abrasive enamel wear.

MATERIAL AND METHODS

This randomized, single-blind in situ/ex vivo study was conducted with four crossover phases of 5 days (one group tested per phase). Bovine enamel blocks (n = 256) were allocated to 16 volunteers and 8 groups. The groups under study were test dentifrice, with calcium silicate, sodium phosphate, and 1450 ppm sodium monofluorophosphate; tin dentifrice, with 3500 ppm stannous chloride, 700 ppm amine fluoride, and 700 ppm sodium fluoride; conventional dentifrice, with 1450 ppm sodium monofluorophosphate; and control (deionized water). Half of the enamel blocks were subjected to erosion and the other half to erosion plus abrasion. The daily extraoral protocol consisted in four citric acid exposures (2 min) and two applications of dentifrice slurry on all blocks for 30 s; after, half of the blocks were brushed for 15 s. The response variable was enamel loss. Data were analyzed by two-way ANOVA and Fisher's test (p < 0.05).

RESULTS

For erosion, the test dentifrice promoted less enamel loss than water (4.7 ± 3.1 and 5.8 ± 2.5 μm, respectively, p < 0.05), and did not differ from tin (4.8 ± 2.5 μm) and conventional (4.8 ± 1.4 μm) dentifrices (p > 0.05). However, the test dentifrice (7.7 ± 3.8 μm) promoted higher wear after erosive plus abrasive procedures than tin (5.4 ± 1.5 μm) and conventional (6.2 ± 1.7 μm, p < 0.05) dentifrices, and did not differ from water (6.9 ± 2.0 μm).

CONCLUSIONS

The investigated dentifrice reduced enamel loss against acid challenge but had no effect against acid and brushing challenge.

CLINICAL RELEVANCE

Little is known regarding the preventive effect of dentifrices indicated for dental erosion. The tested anti-erosive dentifrice was unable to protect enamel when erosion was associated to toothbrushing abrasion.

Do fluoride toothpastes have similar preventive effect in permanent and primary teeth against erosive tooth wear?

BACKGROUND

Little is known about fluoride toothpastes effect on primary teeth submitted to erosive tooth wear.

OBJECTIVES

To evaluate the preventive effect of different toothpastes on surface loss (SL) after severe erosion/abrasion model and to compare this effect between permanent (PT) and primary teeth (pt).

DESIGN

Enamel samples were randomly divided according toothpastes groups (n = 17). G1: placebo; G2: NaF; G3: AmF-NaF-SnCl2 anti-erosion; G4: SnF2 ; and G5: NaF anti-erosion for children. Samples were incubated in artificial saliva (1 hour), submitted to erosive challenge (3 minutes; 1% citric acid; pH3.6; at 25°C) and to toothbrush abrasion (2 minutes slurry immersion; 50 strokes; 200 g) during 30 cycles. Surface loss (μm; mean ± SD) was quantified by contactless profilometry. The effects of the two covariables "tooth" and "toothpaste" were analysed by non-parametric ANOVA, variables with significant effects were tested by Wilcoxon tests.

RESULTS

pt showed significantly higher surface loss than PT in all groups (P < 0.001). The mean values of SL of each group were: G1 PT 18.18(±3.98), pt 25.65(±9.21); G2 PT 14.76(±2.82), pt 18.11(±3.92); G3 PT 12.62(±5.29), pt 15.61(±6.70); G4 PT 17.12(±2.24), pt 23.41(±7.9); G5 PT 13.24(±1.29), pt 18.28(±8.96).

CONCLUSIONS

In permanent teeth, G3 showed the best preventive effect. In primary teeth, G1, G3, and G5 showed similar effect.

Anti-Erosive Effect of Solutions Containing Sodium Fluoride, Stannous Chloride, and Selected Film-Forming Polymers

The aim of this study was to evaluate the anti-erosive effect of solutions containing sodium fluoride (F: 225 ppm F–), stannous chloride (Sn: 800 ppm Sn2+), and some film-forming polymers (Gantrez: Poly [methylvinylether-alt-maleic anhydride]; PGA: propylene glycol alginate; Plasdone: poly[vinylpyrrolidone]; and CMC: carboxymethylcellulose). Solutions were tested in an erosion-remineralization cycling model, using enamel and dentin specimens (n = 10, for each substrate). Distilled water was the negative control. Cycling consisted of 120 min immersion in human saliva, 5 min in 0.3% citric acid solution, and 120 min of exposure to human saliva, 4×/day, for 5 days. Treatment with solutions (pH = 4.5) was carried out 2×/day, for 2 min. Surface loss (SL) was evaluated with optical profilometry. Zeta potential of hydroxyapatite crystals was determined after treatment with the solutions. Data were statistically analyzed (α = 0.05). For enamel, all polymers showed significantly lower SL (in µm) than the control (11.09 ± 0.94), except PGA (10.15 ± 1.25). PGA significantly improved the protective effect of F (4.24 ± 0.97 vs. 5.64 ± 1.60, respectively). None of the polymers increased the protection of F+Sn (5.13 ± 0.78). For dentin, only Gantrez (11.40 ± 0.97) significantly reduced SL when compared with the negative control (12.76 ± 0.75). No polymer was able to enhance the effect of F (6.28 ± 1.90) or F+Sn (7.21 ± 1.13). All fluoridated solutions demonstrated significantly lower SL values than the control for both substrates. Treatment of hydroxyapatite nanoparticles with all solutions resulted in more negative zeta potentials than those of the control, except Plasdone, PGA, and F+Sn+PGA, the latter two presenting the opposite effect. In conclusion, Gantrez, Plasdone, and CMC exhibited an anti-erosive effect on enamel. PGA increased the protection of F. For dentin, only Gantrez reduced erosion.

Surface characteristics of a modified acidulated phosphate fluoride gel with nano-hydroxyapatite coating applied on bovine enamel subjected to an erosive environment

This study evaluated the antierosive effect applying a modified acidulated phosphate fluoride (APF) gel containing nano-hydroxyapatite (nHAp) on the enamel surface before erosion. After polishing, the exposed flat enamel surfaces (n = 7/group) from bovine incisors were treated with artificial saliva (S - negative control), orange juice (ERO), APF gel (positive control) and APF_nHAp gel. All samples were subjected to six cycles of demineralization (orange juice, pH ~ 3.5, 10 min) followed by remineralization (saliva, 37°C, 1 hr). The enamel surface morphology, topography, and inorganic composition were analyzed using scanning electron microscopy, roughness testing, and micro energy-dispersive X-ray fluorescence spectrometry, respectively. The mean (standard deviation) roughness values (Ra, μm) were S, 0.13 (0.05); ERO, 0.25 (0.07); APF, 0.22 (0.08); and APF_nHAp, 0.17 (0.04). Ra values were significantly higher after ERO (p < .01) and APF (p < .05) treatments than after S. The enamel surface morphology was altered by the treatments, except for the S specimens. The mineral content of the enamel showed a clear trend with Ca and P reduction in the order of APF < S < APF_nHAp < ERO and APF < S < ERO < APF_nHAp, respectively. We can conclude that APF gel increased mineral concentration on the enamel. Moreover, the APF_nHAp material modified the composition and morphology of the enamel surface.

Effect of Phosphorylated Chitosan on Dentin Erosion: An in vitro Study

The aim of this study was to evaluate the antierosive effect of phosphorylated chitosan in dentin. Bovine dentin specimens were randomly distributed into the following groups: (1) no treatment (NoTx/negative control), (2) phosphate-buffered saline solution (PBS), (3) AmF/NaF/SnCl2 (positive control), (4) 0.5% chitosan solution (Chi), (5) 0.5% neutral phosphorylated (NP)-Chi, and (6) 0.5% alkaline phosphorylated (AP)-Chi. The specimens were submitted to de-remineralization treatment cycles for 5 days: 0.5% citric acid (2 min), remineralizing solution (30 min), and surface treatment according to assigned groups (2 min, 6×/day). The loss of dentin surface was measured by profilometry. Hardness and modulus of elasticity were measured using a nanoindenter equipped with a Berkovich diamond tip. The dentin surface was analyzed by scanning electron microscopy (SEM). The largest loss of dentin was observed in the No Tx and PBS groups (approx. 25 µm). The group treated with AmF/NaF/SnCl2 showed less loss of dentin (67% reduction vs. NoTx and PBS), followed by the groups treated with NP-Chi and AP-Chi (33% reduction), and Chi (18% reduction). Nanohardness and modulus of elasticity were similar in the NoTx and PBS groups, with a small increase in stiffness in all other groups. SEM revealed that the experimental solution of AP-Chi had a favorable effect on maintaining the integrity of collagen fibrils. AmF/NaF/SnCl2 showed a preserved mineralized collagen surface. Further studies are warranted to explore this nontoxic phosphorylated chitosan polymer as an effective agent in the prevention and treatment of dental erosion.

Fluoride toothpastes containing micrometric or nano-sized sodium trimetaphosphate reduce enamel erosion in vitro

OBJECTIVE

To evaluate the effect of fluoride toothpastes supplemented with micrometric or nano-sized sodium trimetaphosphate (TMP or TMPnano, respectively) on enamel erosion in vitro, as well as the influence of salivary acquired pellicle and saliva.

MATERIAL AND METHODS

Bovine enamel blocks (n = 120) were randomly assigned into the following experimental toothpastes: no F/TMP/TMPnano (Placebo); 1100 ppm F (1100 ppm F); 1100 ppm F plus 3% TMP or 3% TMPnano (1100 TMP or 1100 TMPnano, respectively) and 5000 ppm F (5000 ppm F). Erosive challenge was performed by immersion of the blocks in citric acid for 5 min, followed by 2 h immersion in human or artificial saliva, 4×/day, during 5 days. After each erosive challenge, blocks were exposed to slurries of the toothpastes. Enamel erosion (µm), surface hardness (SHf) and cross-sectional hardness (ΔKHN) were analyzed as response variables and the data were submitted to two-way ANOVA, followed by the Student-Newman-Keuls test (p < .05).

RESULTS

1100 TMPnano significantly reduced enamel loss when compared to 1100 TMP (p = .002), reaching values similar to those promoted by 5000 ppm F (p = .96). 1100 ppm F presented significantly lower enamel loss than Placebo (p < .001), and higher than 1100 TMP (p < .001). Significantly higher SHf and lower ΔKHN was observed for 1100 TMPnano and 5000 ppm F when compared with the other groups (p < .001). The type of saliva did not influence enamel erosion, SHf and ΔKHN for the groups treated with TMP-containing toothpastes.

CONCLUSION

The addition of 3% TMPnano to 1100 ppm F toothpastes significantly increases the protective effect against enamel erosion in vitro when compared with its counterparts with micrometric TMP or without TMP. This effect was not influenced by the presence of acquired enamel pellicle and saliva.

Chemical and physical factors of desensitizing and/or anti-erosive toothpastes associated with lower erosive tooth wear

Toothpastes have a complex formulation and their different chemical and physical factors will influence their effectiveness against erosive tooth wear (ETW). We, therefore, investigated the effect of different desensitizing and/or anti-erosive toothpastes on initial enamel erosion and abrasion, and analysed how the interplay of their chemical and physical factors influences ETW. Human enamel specimens were submitted to 5 erosion-abrasion cycles using 9 different toothpastes and an artificial saliva group, and enamel surface loss (SL) was calculated. Chemical and physical factors (pH; presence of tin; calcium, phosphate and fluoride concentrations; % weight of solid particles; wettability; and particle size) of the toothpaste slurries were then analysed and associated with the amount of SL in a multivariate model. We observed that all desensitizing and/or anti-erosive toothpastes presented different degrees of SL. Besides pH and fluoride, all other chemical and physical factors were associated with SL. The results of this experiment indicate that enamel SL occurs independent of whether the toothpastes have a desensitizing or anti-erosive claim, and that lower SL is associated with the presence of tin, higher concentration of calcium and phosphate, higher % weight of solid particles, smaller particle size, and lower wettability.

The influence of frequently consumed beverages and snacks on dental erosion among preschool children in Saudi Arabia

Background

To determine the prevalence of dental erosion and its association to commonly used beverages and snacks among 3 to 5 year old preschool children in Riyadh, Saudi Arabia.

Methods

Three hundred eighty-eight preschool children between 3 and 5 years old were selected from 10 different schools using a cluster random sample selection; there were 184 (47%) boys and 204 (53%) girls. The surfaces of each tooth were examined for erosion, and the level of tooth wear was recorded. Data on the frequently used beverages and snacks were obtained by questionnaires completed by the parents of the preschool children.

Results

Among the 388 children examined, 47% exhibited low erosion, 10% exhibited moderate erosion and 4% exhibited severe erosion. There was no statistically significant difference between boys and girls in terms of the prevalence of erosion. Sixty percent of the children regularly consumed juice drinks. Among daily consumers, 84% of children showed erosion prevalence with strongly significant association (p < 0.005). Holding the drink in the mouth also showed a significant association with erosion (p < 0.02).

Conclusion

It was concluded that an association was found between the prevalence of dental erosion and the frequency of citrus and carbonated juice consumed by the preschool children in Saudi Arabia.