The pH-Responsive Property of Antimicrobial Peptide GH12 Enhances Its Anticaries Effects at Acidic pH

Cariogenic Microbiota and Emerging Antibacterial Materials to Combat Dental Caries: A Literature Review

Dental caries is the most common oral disease in the world and a chronic infectious disease. The cariogenic microbiome plays an important role in the process of caries. The ecological imbalance of microbiota leads to low pH, which causes caries. Therefore, antibacterial materials have always been a hot topic. Traditional antibacterial materials such as cationic antibacterial agents, metal ion antibacterial agents, and some natural extract antibacterial agents have good antibacterial effects. However, they can cause bacterial resistance and have poor biological safety when used for long-term purposes. Intelligent antibacterial materials, such as pH-responsive materials, nanozymes, photoresponsive materials, piezoelectric materials, and living materials are emerging antibacterial nano-strategies that can respond to the caries microenvironment or other specific stimuli to exert antibacterial effects. Compared with traditional antibacterial materials, these materials are less prone to bacterial resistanceand have good biological safety. This review summarizes the characteristics of cariogenic microbiota and some traditional or emerging antibacterial materials. These emerging antibacterial materials can accurately act on the caries microenvironment, showing intelligent antibacterial effects and providing new ideas for caries management.

An introduction to antibacterial materials in composite restorations

The longevity of direct esthetic restorations is severely compromised because of, among other things, a loss of function that comes from their susceptibility to biofilm-mediated secondary caries, with Streptococcus mutans being the most prevalent associated pathogen. Strategies to combat biofilms range from dental compounds that can disrupt multispecies biofilms in the oral cavity to approaches that specifically target caries-causing bacteria such as S mutans. One strategy is to include those antibacterial compounds directly in the material so they can be available long-term in the oral cavity and localized at the margin of the restorations, in which many of the failures initiate. Many antibacterial compounds have already been proposed for use in dental materials, including but not limited to phenolic compounds, antimicrobial peptides, quaternary ammonium compounds, and nanoparticles. In general, the goal of incorporating them directly into the material is to increase their availability in the oral cavity past the fleeting effect they would otherwise have in mouth rinses. This review focuses specifically on natural compounds, of which polyphenols are the most abundant category. The authors examined attempts at using these either as pretreatment or incorporated directly into restorative material as a step toward fulfilling a long-recognized need for restorations that can combat or prevent secondary caries formation. Repeatedly restoring failed restorations comes with the loss of more tooth structure along with increasingly complex and costly dental procedures, which is detrimental to not only oral health but also systemic health.

Antimicrobial Peptide Hydrogel with pH-Responsive and Controllable Drug Release Properties for the Efficient Treatment of Helicobacter pylori Infection

Helicobacter pylori is the primary cause of gastric adenocarcinoma, which afflicts more than half of the world's population and seriously affects human health. However, achieving efficient treatment of H. pylori infection by effective drug delivery and bioavailability after oral administration remains a challenge due to the harsh microenvironment, short drug retention time, and physiological barriers in the stomach. Moreover, H. pylori has shown resistance to many clinical antibiotics. Antimicrobial peptides (AMPs) exhibit substantial therapeutic efficacy against H. pylori, while they are not likely to induce drug resistance, suggesting their potential utility for the treatment of diseases related to H. pylori. In this paper, we report the design and synthesis of an AMP (GE33) hydrogel with pH-responsive and controlled peptide release properties, in which the minimal inhibitory concentration of the AMP against H. pylori is as low as 1 μg/mL. GE33 self-assembles into a stable peptide hydrogel under neutral pH conditions but decomposes into monomers or oligomers under acidic conditions. Upon oral administration of the hydrogel, the acidic gastric environment would facilitate rapid release of active AMP molecules from the hydrogel and immediate targeting of H. pylori in the stomach wall. Additionally, the remaining peptide is protected in the hydrogel, extending its retention time in the stomach, so that persistent drug release is achieved. The controlled and sustained release manner of the active molecule GE33, which enhances drug bioavailability, along with its excellent bactericidal efficacy opens a great potential for treating H. pylori infection.

Cocktail Approach with Polyserotonin Nanoparticles and Peptides for Treatment of Streptococcus mutans

Dental plaque, formed by a Streptococcus mutans biofilm, is a major contributor to cavity formation. While antimicrobial strategies exist, the growing risk of antibiotic resistance necessitates alternative therapeutic solutions. Polyserotonin nanoparticles (PSeNPs), recently recognized for their photothermal property and promising biomedical applications, open up a new avenue for antimicrobial use. Here, we introduced a UV-initiated synthetic route for PSeNPs with improved yield. Using these PSeNPs, a cocktail treatment to reduce the viability of this cavity-causing bacteria was developed. This cocktail comprises an S. mutans-targeting antimicrobial peptide (GH12), an intraspecies competence-stimulating peptide that triggers altruistic cell death in S. mutans, and laser-activated heating of PSeNPs. The "peptide + PSeNP + laser" combination effectively inhibits S. mutans growth in both planktonic and biofilm states. Moreover, the cocktail approach remains effective in reducing the viability of S. mutans in a more virulent dual-species biofilm with Candida albicans. Overall, our results reinforce the utility of a multipronged therapeutic strategy to reduce cariogenic bacteria in the complex model oral biofilm.

Development strategies and application of antimicrobial peptides as future alternatives to in-feed antibiotics

The use of in-feed antibiotics has been widely restricted due to the significant environmental pollution and food safety concerns they have caused. Antimicrobial peptides (AMPs) have attracted widespread attention as potential future alternatives to in-feed antibiotics owing to their demonstrated antimicrobial activity and environment friendly characteristics. However, the challenges of weak bioactivity, immature stability, and low production yields of natural AMPs impede practical application in the feed industry. To address these problems, efforts have been made to develop strategies for approaching the AMPs with enhanced properties. Herein, we summarize approaches to improving the properties of AMPs as potential alternatives to in-feed antibiotics, mainly including optimization of structural parameters, sequence modification, selection of microbial hosts, fusion expression, and industrially fermentation control. Additionally, the potential for application of AMPs in animal husbandry is discussed. This comprehensive review lays a strong theoretical foundation for the development of in-feed AMPs to achieve the public health globally.

A Comprehensive Review of Recent Research into the Effects of Antimicrobial Peptides on Biofilms-January 2020 to September 2023

Microbial biofilm formation creates a persistent and resistant environment in which microorganisms can survive, contributing to antibiotic resistance and chronic inflammatory diseases. Increasingly, biofilms are caused by multi-drug resistant microorganisms, which, coupled with a diminishing supply of effective antibiotics, is driving the search for new antibiotic therapies. In this respect, antimicrobial peptides (AMPs) are short, hydrophobic, and amphipathic peptides that show activity against multidrug-resistant bacteria and biofilm formation. They also possess broad-spectrum activity and diverse mechanisms of action. In this comprehensive review, 150 publications (from January 2020 to September 2023) were collected and categorized using the search terms 'polypeptide antibiotic agent', 'antimicrobial peptide', and 'biofilm'. During this period, a wide range of natural and synthetic AMPs were studied, of which LL-37, polymyxin B, GH12, and Nisin were the most frequently cited. Furthermore, although many microbes were studied, Staphylococcus aureus and Pseudomonas aeruginosa were the most popular. Publications also considered AMP combinations and the potential role of AMP delivery systems in increasing the efficacy of AMPs, including nanoparticle delivery. Relatively few publications focused on AMP resistance. This comprehensive review informs and guides researchers about the latest developments in AMP research, presenting promising evidence of the role of AMPs as effective antimicrobial agents.

Unveiling a novel mechanism for competitive advantage of ciprofloxacin-resistant bacteria in the environment through bacterial membrane vesicles

Ciprofloxacin (CIP) is a prevalent environmental contaminant that poses a high risk of antibiotic resistance. High concentrations of antibiotics can lead to the development of resistant bacteria with high fitness costs, which often face a competitive disadvantage. However, it is unclear whether low-cost resistant bacteria formed by exposure to sub-MIC CIP in the environment can evolve competitive mechanisms against sensitive Escherichia coli (SEN) other than stronger resistance to CIP. Our study exposed E. coli to sub-MIC CIP levels, resulting in the development of CIP-resistant E. coli (CIPr). In antibiotic-free co-culture assays, CIPr outcompeted SEN. This indicates that CIPr is very likely to continue to develop and spread in antibiotic-free environments such as drinking water and affect human health. Further mechanism investigation revealed that bacterial membrane vesicles (BMVs) in CIPr, functioning as substance delivery couriers, mediated a cleavage effect on SEN. Proteomic analysis identified Entericidin B (EcnB) within CIPr-BMVs as a key factor in this competitive interaction. RT-qPCR analysis showed that the transcription of its negative regulator ompR/envZ was down-regulated. Moreover, EcnB plays a crucial role in the development of CIP resistance, and some resistance-related proteins and pathways have also been discovered. Metabolomics analysis highlighted the ability of CIPr-BMVs to acidify SEN, increasing the lytic efficiency of EcnB through cationization. Overall, our study reveals the importance of BMVs in mediating bacterial resistance and competition, suggesting that regulating BMVs production may be a new strategy for controlling the spread of drug-resistant bacteria.

Antibacterial Activity of a Lysin LysP53 against Streptococcus mutans

Dental caries is a common disease affecting quality of life globally. In the present study, we found that a bacteriophage lysin LysP53 against Acinetobacter baumannii possesses selective activity on Streptococcus mutans, the main etiological agent of dental caries, even in low pH caries microenvironments, whereas only minor LysP53 activity was detected against Streptococcus sanguinis, Streptococcus oralis, and Streptococcus mitis. Testing activity against S. mutans planktonic cells showed that 4 μM LysP53 could kill more than 84% of S. mutans within 1 min in buffer with optimal pHs ranging from 4.0 to 6.5. Daily application of LysP53 on biofilms formed in BHI medium supplemented or not with sucrose could reduce exopolysaccharides, expression of genes related to acid resistance and adhesion, and the number of live bacteria in the biofilms. LysP53 treatment also showed similar effects as 0.12% chlorhexidine in preventing enamel demineralization due to S. mutans biofilms, as well as effective removal of S. mutans colonization of tooth surfaces in mice without observed toxic effects. Because of its selective activity against main cariogenic bacteria and good activity in low pH caries microenvironments, it is advantageous to use LysP53 as an active agent for preventing caries.

Smart dental materials for antimicrobial applications

Smart biomaterials can sense and react to physiological or external environmental stimuli (e.g., mechanical, chemical, electrical, or magnetic signals). The last decades have seen exponential growth in the use and development of smart dental biomaterials for antimicrobial applications in dentistry. These biomaterial systems offer improved efficacy and controllable bio-functionalities to prevent infections and extend the longevity of dental devices. This review article presents the current state-of-the-art of design, evaluation, advantages, and limitations of bioactive and stimuli-responsive and autonomous dental materials for antimicrobial applications. First, the importance and classification of smart biomaterials are discussed. Second, the categories of bioresponsive antibacterial dental materials are systematically itemized based on different stimuli, including pH, enzymes, light, magnetic field, and vibrations. For each category, their antimicrobial mechanism, applications, and examples are discussed. Finally, we examined the limitations and obstacles required to develop clinically relevant applications of these appealing technologies.

Novel Lactotransferrin-Derived Antimicrobial Peptide LF-1 Inhibits the Cariogenic Virulence Factors of Streptococcus mutans

We previously developed a novel lactotransferrin-derived antimicrobial peptide, LF-1, with selective antibacterial activity against the characteristic cariogenic bacterium Streptococcus mutans. This study further investigated the effects of LF-1 on the cariogenic virulence factors of S. mutans and evaluated the changes in virulence-associated enzymes and genes; the viability, acidogenicity, and aciduricity of planktonic S. mutans; and initial colonisation and biofilm formation after treatment with LF-1. The method of qRT-PCR was used to evaluate S. mutans virulence-associated gene expression. LF-1 interfered with the cell viability of S. mutans within 6 h. LF-1 inhibited the acidogenicity and aciduricity of S. mutans, with reduced lactic acid production and survival in a lethal acidic environment, and inactivated lactate dehydrogenase and F1F0-ATPase activity. LF-1 decreased surface-adherent S. mutans within 60 min and inhibited S. mutans biofilm formation, where scanning electron microscopy and confocal laser scanning microscopy showed reduced extracellular matrix and bacteria. LF-1 downregulates S. mutans virulence-associated gene expression. LF-1 inhibited the growth and cariogenic virulence factors of S. mutans in vitro with a reduction in key enzymatic activity and downregulation of virulence-associated gene expression. LF-1 has promising application prospects in the fight against S. mutans and dental caries.

Therapeutic potential of antimicrobial peptides for treatment of wound infection

Healing of cutaneous wounds is a fundamental process required to re-establish tissue integrity, repair skin barrier function, and restore skin homeostasis. Chronic wound infection, exacerbated by the growing development of resistance to conventional therapies, hinders the skin repair process and is a serious clinical problem affecting millions of people worldwide. In the past decade, the use of antimicrobial peptides (AMPs) has attracted increasing attention as a potential novel strategy for the treatment of chronic wound infections due to their unique multifaceted mechanisms of action, and AMPs have been demonstrated to function as potent host-defense molecules that can control microbial proliferation, modulate host-immune responses, and act as endogenous mediators of wound healing. To date over 3,200 AMPs have been discovered either from living organisms or through synthetic derivation, some of which have progressed to clinical trials for the treatment of burn and wound injuries. However, progress to routine clinical use has been hindered due to AMPs' susceptibility to wound and environmental factors including changes in pH, proteolysis, hydrolysis, oxidation, and photolysis. This review will discuss the latest research focused on the development and applications of AMPs for wound infections using the latest nanotechnological approaches to improve AMP delivery, and stability to present effective combinatorial treatment for clinical applications.

pH-activated antibiofilm strategies for controlling dental caries

Dental biofilms are highly assembled microbial communities surrounded by an extracellular matrix, which protects the resident microbes. The microbes, including commensal bacteria and opportunistic pathogens, coexist with each other to maintain relative balance under healthy conditions. However, under hostile conditions such as sugar intake and poor oral care, biofilms can generate excessive acids. Prolonged low pH in biofilm increases proportions of acidogenic and aciduric microbes, which breaks the ecological equilibrium and finally causes dental caries. Given the complexity of oral microenvironment, controlling the acidic biofilms using antimicrobials that are activated at low pH could be a desirable approach to control dental caries. Therefore, recent researches have focused on designing novel kinds of pH-activated strategies, including pH-responsive antimicrobial agents and pH-sensitive drug delivery systems. These agents exert antibacterial properties only under low pH conditions, so they are able to disrupt acidic biofilms without breaking the neutral microenvironment and biodiversity in the mouth. The mechanisms of low pH activation are mainly based on protonation and deprotonation reactions, acids labile linkages, and H⁺-triggered reactive oxygen species production. This review summarized pH-activated antibiofilm strategies to control dental caries, concentrating on their effect, mechanisms of action, and biocompatibility, as well as the limitation of current research and the prospects for future study.

Targeting cariogenic pathogens and promoting competitiveness of commensal bacteria with a novel pH-responsive antimicrobial peptide

Novel ecological antimicrobial approaches to dental caries focus on inhibiting cariogenic pathogens while enhancing the growth of health-associated commensal communities or suppressing cariogenic virulence without affecting the diversity of oral microbiota, which emphasize the crucial role of establishing a healthy microbiome in caries prevention. Considering that the acidified cariogenic microenvironment leads to the dysbiosis of microecology and demineralization of enamel, exploiting the acidic pH as a bioresponsive trigger to help materials and medications target cariogenic pathogens is a promising strategy to develop novel anticaries approaches. In this study, a pH-responsive antimicrobial peptide, LH12, was designed utilizing the pH-sensitivity of histidine, which showed higher cationicity and stronger interactions with bacterial cytomembranes at acidic pH. Streptococcus mutans was used as the in vitro caries model to evaluate the inhibitory effects of LH12 on the cariogenic properties, such as biofilm formation, biofilm morphology, acidurance, acidogenicity, and exopolysaccharides synthesis. The dual-species model of Streptococcus mutans and Streptococcus gordonii was established in vitro to evaluate the regulation effects of LH12 on the mixed species microbial community containing both cariogenic bacteria and commensal bacteria. LH12 suppressed the cariogenic properties and regulated the bacterial composition to a healthier condition through a dual-functional mechanism. Firstly, LH12-targeted cariogenic pathogens in response to the acidified microenvironment and suppressed the cariogenic virulence by inhibiting the expression of multiple virulence genes and two-component signal transduction systems. Additionally, LH12 elevated H₂O₂ production of the commensal bacteria and subsequently improved the ecological competitiveness of the commensals. The dual-functional mechanism made LH12 a potential bioresponsive approach to caries management.

Caries Management with Non-Metallic Nanomaterials: A Systematic Review

BACKGROUND

Non-metallic nanomaterials do not stain enamel or dentin. Most have better biocompatibility than metallic nanomaterials do for management of dental caries.

OBJECTIVE

The objective of this study is to review the types, properties and potential uses of non-metallic nanomaterials systematically for managing dental caries.

METHODS

Two researchers independently performed a literature search of publications in English using PubMed, Scopus and Web of Science. The keywords used were (nanoparticles OR nanocomposites OR nanomaterials) AND (caries OR tooth decay). They screened the titles and abstracts to identify potentially eligible publications of original research reporting non-metallic nanomaterials for caries management. Then, they retrieved and studied the full text of the identified publications for inclusion in this study.

RESULTS

Out of 2497 resulting publications, this study included 75 of those. The non-metallic nanomaterials used in these publications were categorized as biological organic nanomaterials (n=45), synthetic organic nanomaterials (n=15), carbon-based nanomaterials (n=13) and selenium nanomaterials (n=2). They inhibited bacteria growth and/or promoted remineralization. They could be incorporated in topical agents (29/75, 39%), dental adhesives (11/75, 15%), restorative fillers (4/75, 5%), dental sealant (3/75, 4%), oral drugs (3/75, 4%), toothpastes (2/75, 3%) and functional candies (1/75, 1%). Other publications (22/75, 29%) do not mention specific applications. However, most publications (67/75, 89%) were in vitro studies. Six publications (6/75, 8%) were animal studies, and only two publications (2/75, 3%) were clinical studies.

CONCLUSION

The literature showed non-metallic nanomaterials have antibacterial and/or remineralising properties. The most common type of non-metallic nanomaterials for caries management is organic nanomaterials. Non-metallic nanomaterials can be incorporated into dental sealants, toothpaste, dental adhesives, topical agents and even candies and drugs. However, the majority of the publications are in vitro studies, and only two publications are clinical studies.

Development and evaluation of a chewing gum containing antimicrobial peptide GH12 for caries prevention

The purpose of this study was to develop a chewing gum containing a novel antimicrobial peptide GH12 and evaluate its biocompatibility, antimicrobial activity, and caries-preventive effects in vivo and in vitro. GH12 chewing gum was developed using a conventional method and its extracts were prepared in artificial saliva. GH12 concentration in the extracts was determined by high-performance liquid chromatography; extracts were used for growth curve assay, time-kill assay, crystal violet staining assay, scanning electron microscopy, and Cell Counting Kit-8 assay. A rat caries model was established, and molars were treated topically with extracts for 5 weeks. Weight gain monitoring, hematoxylin-eosin staining, micro-computed tomography, and Keyes scoring were conducted. Significant inhibition of Streptococcus mutans growth and biofilm formation was observed. Extracts displayed low cytotoxicity against human gingival epithelial cells. No significant differences in weight gain or signs of harm to the mucosal tissues in any of the rats were observed. Keyes scores of caries lesions in the GH12 chewing gum group were lower than those of the negative control group. It was concluded that GH12 chewing gum showed good biocompatibility, antimicrobial activity, and caries-preventive effects, exhibiting great potential to prevent dental caries as an adjuvant to regular oral hygiene.

Invisible assassin coated on dental appliances for on-demand capturing and killing of cariogenic bacteria

The accumulation of microbes on long-wear artificial dental materials creates a great risk for oral diseases and causes deterioration of material properties. Therefore, smart antibacterial materials capable of resisting the colonization of microorganisms and simultaneously eliminating pathogenic bacteria as needed show outstanding superiority for the recovery of dental health, which are scarcely reported until now. Here, we present a responsive hydrogel coating as invisible assassin on clear overlay appliances target for dental caries. Taking advantage of pH-responsive carboxybetaine methacrylate-dimethylaminoethyl methacrylate copolymer P(CBMA-co-DMAEMA) and antibacterial peptides, the surface potential of hydrogel shifts positively, accompanied with the release of antibacterial peptides when pH gets lower. The hybrid hydrogel layer hence exerts antifouling property and resists bacterial adhesion in normal physiological, while captures and kills cariogenic bacteria in acidic condition. This biocompatible, transparent and stable hydrogel coating has little influence for the aesthetics and mechanical properties of bulk materials. The strategy developed here can provide reference for the design of biomedical devices in other areas.

Annual review of selected scientific literature: A report of the Committee on Scientific Investigation of the American Academy of Restorative Dentistry

The Scientific Investigation Committee of the American Academy of Restorative Dentistry offers this review of the 2020 professional literature in restorative dentistry to inform busy dentists regarding noteworthy scientific and clinical progress over the past year. Each member of the committee brings discipline-specific expertise to this work to cover this broad topic. Specific subject areas addressed include prosthodontics; periodontics, alveolar bone, and peri-implant tissues; implant dentistry; dental materials and therapeutics; occlusion and temporomandibular disorders (TMDs); sleep-related breathing disorders; oral medicine and oral and maxillofacial surgery; and dental caries and cariology. The authors focused their efforts on reporting information likely to influence day-to-day dental treatment decisions with a keen eye on future trends in the profession. With the tremendous volume of dentistry and related literature being published today, this review cannot possibly be comprehensive. The purpose is to update interested readers and provide important resource material for those interested in pursuing greater detail. It remains our intent to assist colleagues in navigating the extensive volume of important information being published annually. It is our hope that readers find this work useful in successfully managing the dental patients they encounter.

Cariogenic Biofilm: Pathology-Related Phenotypes and Targeted Therapy

The initiation and development of cariogenic (that is, caries-related) biofilms are the result of the disruption of homeostasis in the oral microenvironment. There is a daily accumulation of dental biofilm on the surface of teeth and its matrix of extracellular polymers supports the host in its defense against invading microbes, thus helping to achieve oral microbial homeostasis. However, the homeostasis can be broken down under certain circumstances such as during long-term exposure to a low pH environment which results in the dominance of acidogenic and acid-tolerating species in the dental biofilm and, thus, triggers the shift of harmless biofilm to an acidic one. This work aims to explore microbial diversity and the quorum sensing of dental biofilm and their important contributions to oral health and disease. The complex and multispecies ecosystems of the cariogenic biofilm pose significant challenges for the modulation of the oral microenvironment. Promising treatment strategies are those that target cariogenic niches with high specificity without disrupting the balance of the surrounding oral microbiota. Here, we summarized the recent advances in modulating cariogenic biofilm and/or controlling its pathogenic traits.

Recent Advances in the Development of Antimicrobial and Antifouling Biocompatible Materials for Dental Applications

The risk of secondary bacterial infections resulting from dental procedures has driven the design of antimicrobial and antifouling dental materials to curb pathogenic microbial growth, biofilm formation and subsequent oral and dental diseases. Studies have investigated approaches based primarily on contact-killing or release-killing materials. These materials are designed for addition into dental resins, adhesives and fillings or as immobilized coatings on tooth surfaces, titanium implants and dental prosthetics. This review discusses the recent developments in the different classes of biomaterials for antimicrobial and antifouling dental applications: polymeric drug-releasing materials, polymeric and metallic nanoparticles, polymeric biocides and antimicrobial peptides. With modifications to improve cytotoxicity and mechanical properties, contact-killing and anti-adhesion materials show potential for incorporation into dental materials for long-term clinical use as opposed to short-lived antimicrobial release-based coatings. However, extended durations of biocompatibility testing, and adjustment of essential biomaterial features to enhance material longevity in the oral cavity require further investigations to confirm suitability and safety of these materials in the clinical setting. The continuous exposure of dental restorative and regenerative materials to pathogenic microbes necessitates the implementation of antimicrobial and antifouling materials to either replace antibiotics or improve its rational use, especially in the day and age of the ever-increasing problem of antimicrobial resistance.