Current trends in textile wastewater treatment-bibliometric review

A bibliometric study using 1992 to 2021 database of the Science Citation Index Expanded was carried out to identify which are the current trends in textile wastewater treatment research. The study aimed to analyze the performance of scholarly scientific communications in terms of yearly publications/citations, total citations, scientific journals, and their categories in the Web of Sciences, top institutions/countries and research trends. The annual publication of scientific articles fluctuated in the first ten years, with a steady decrease for the last twenty years. An analysis of the most common terms used in the authors' keywords, publications' titles, and KeyWords Plus was carried out to predict future trends and current research priorities. Adsorbent nanomaterials would be the future of wastewater treatment for decoloration of the residual dyes in the wastewater. Membranes and electrolysis are important to demineralize textile effluent for reusing wastewater. Modern filtration techniques such as ultrafiltration and nanofiltration are advanced membrane filtration applications.

Green Synthesis of Silver Nanoparticles by Fusarium oxysporum and its Function Against Aspergillus and Fusarium Fungi

(NPs) can be produced by various methods such as physical and chemical processes. However, environmentally friendly ways are increasingly requested. In this research, (Ag-NPs) were produced by Fusarium oxysporum, and its antifungal effect on Aspergillus and Fusarium was investigated. Nanoparticles were produced by silver nitrate salt and Fusarium oxysporum native to Isfahan city. In order to optimize the synthesis conditions, optimization of some factors such as volume, concentration, time, temperature, and pH of the extract was performed. The structural and physical properties of NPs were determined by spectrophotometer, XRD, FTIR FESEM, SEM, and TEM microscopy. For the study of the inhibitory effect of NPs on Fusarium and Aspergillus growth, the fungi were cultured in media containing various concentrations of NPs from 50 to 1500 ppm. Then, the colony diameter was measured for over 10 days and the growth inhibition percentage was estimated. For statistical analysis, the 600 Mann-Whitney tests have been applied.The NPs were produced after mixing the powdered fungal mass and silver nitrate salt in optimum conditions which were 2 mM of salt, triple fungal mass volume proportion relative to the salt, pH of 9, and temperature of 28 °C. The existence of a peak at 420 nm in FTIR was due to nanoparticle production. Based on the XRD, the synthesized NPs had suitable properties similar to the standard NPs reported in the studies. Images from TEM, SEM, and FESEM microscopes displayed uniform NPs in variable sizes between 25 and 100 nm. According to the results, the maximum growth inhibition percentage of Ag-NPs on Fusarium was approximately 60% at 1500 ppm, and 88% on Aspergillus at 800 ppm. Biosynthesized Ag-NPs with Fusarium oxysporum have desirable structural traits and can inhibit the growth of Fusarium and Aspergillus at significant levels.

Antibacterial fibers impregnated with mycosynthetized AgNPs for control of Pectobacterium carotovorum

Using biopolymers functionalized with antibacterial agents to manufacture active packaging is a clean alternative to mitigate food losses due to postharvest plant diseases. In this study, two mycosynthetized AgNPs impregnation methodologies on cotton (cationization and in situ biochemical reduction) were used to obtain the antibacterial fibers (A-AgNPs-C and A-AgNPs-IBR), which, in addition to being characterized by SEM-EDX, XRD, were evaluated as antibacterial materials. The cotton fibers showed growth inhibition of Pectobacterium carotovorum at 48 h. The reuse tests of these cotton fibers showed that the two types of fibers could have up to three successive uses without losing their effectiveness, regardless of the impregnation method used. Is important to highlight that the retention tests indicated that the AgNPs remain attached to the A-AgNPs-C and A-AgNPs-IBR fibers after several successive washes. Finally, the mycosynthesized AgNPs were also impregnated on fique fibers (Fique-AgNPs) by cationization to obtain little antibacterial sacks. Nanostructured materials that in in vivo tests on potatoes showed only 7.8 % of affectation, while the tubers stored in the traditional sacks had an affectation of 25 %. This immobilization of AgNPs in natural fibers will allow the development of a nanobiotechnological application in the storage and transport of potatoes, after performing some additional cytotoxicity tests to guarantee its safety.

In-situ formation of the adsorbent based on octadecylamine for the extraction of Ag+ ions from aqueous solutions and its determination by microinjection flame atomic absorption spectrometry

In this research, a dispersive solid phase extraction procedure based on changing the solubility of octadecylamine with pH was proposed to determine Ag+ ions in different water samples. For this purpose, first, the pH of sample solution containing the analyte was adjusted to 10.5. Then desired volume of the octadecylamine dissolved in acidic solution was injected into the solution. Because of the low solubility of octadecylamine in alkaline solution, a cloudy state was formed. The produced octadecylamine particles acted as a complexing agent for Ag+ ions and adsorbent for the formed complex. The obtained cloudy solution was centrifuged and the sedimented particles were removed and dissolved in a diluted nitric acid solution. It was injected into a flame atomic absorption spectrometry to determine the extracted amounts of the analyte. The effect of important parameters such as the amount of octadecylamine, volume of nitric acid, and centrifugation and vortexing conditions on the extraction efficiency of the procedure was studied and optimized. In optimal conditions, the developed method showed a linear range of 0.50-200 µg L-1. The limits of detection and quantification were 0.18 and 0.50 µg L-1, respectively. Extraction recovery was 93.6%. The relative standard deviations were less than 4%. The effectiveness of the method was investigated by determination of Ag+ ions in water and wastewater samples.

Design of N-heterocycle based-phthalonitrile/metal phthalocyanine-silver nanoconjugates for cancer therapies

This study reports the anticancer properties of carbazole-containing phthalonitrile/phthalocyanine-modified silver nanoparticles for the first time. In this study, a new mono-substituted phthalonitrile namely 3-[9H-carbazole-9-ethoxy]phthalonitrile and its metal phthalocyanines {M = Zn, Co, and Mn(Cl)} were synthesized by template cyclotetramerization of phthalonitrile derivatives. The newly synthesized compounds were characterized using UV-vis, FT-IR, 1H NMR, 13C NMR, and mass spectroscopy. The resultant compounds were successfully linked to the surface of silver nanoparticles. The characterization of the surficial modification was carried out by applying the TEM technique. The cytotoxic activities of the studied nanoconjugates were tested against A549, DLD-1, and Wi38 cell lines by performing a (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) (MTT) assay with/without irradiation. Although the functionalization of silver nanoparticles increased the solubility of phthalocyanines in aqueous media, the presence of phthalonitrile/phthalocyanine derivatives on the silver nanoparticles' surface improved their biological properties. All the studied biological candidates exhibited antiproliferative activities against the cell lines. The IC50 values calculated were between 6.80 and 97.99 μM against the studied cell lines in the dark. However, the IC50 values determined were between 3.11 and 88.90 μM with irradiation. The highest IC50 values obtained were 3.11 and 3.52 μM against the DLD-1 cell line for nanoconjugates 1-AgNP and 3-AgNP, respectively. The findings indicated that the compounds may be utilized as anticancer agents after further studies.

Mycosynthesis of silver nanoparticles: a review

Metallic nanoparticles currently show multiple applications in the industrial, clinical and environmental fields due to their particular physicochemical characteristics. Conventional approaches for the synthesis of silver nanoparticles (AgNPs) are based on physicochemical processes which, although they show advantages such as high productivity and good monodispersity of the nanoparticles obtained, have disadvantages such as the high energy cost of the process and the use of harmful radiation or toxic chemical reagents that can generate highly polluting residues. Given the current concern about the environment and the potential cytotoxic effects of AgNPs, once they are released into the environment, a new green chemistry approach to obtain these nanoparticles called biosynthesis has emerged. This new alternative process counteracts some limitations of conventional synthesis methods, using the metabolic capabilities of living beings to manufacture nanomaterials, which have proven to be more biocompatible than their counterparts obtained by traditional methods. Among the organisms used, fungi are outstanding and are therefore being explored as potential nanofactories in an area of research known as mycosynthesis. For all the above, this paper aims to illustrate the advances in state of the art in the mycosynthesis of AgNPs, outlining the two possible mechanisms involved in the process, as well as the AgNPs stabilizing substances produced by fungi, the variables that can affect mycosynthesis at the in vitro level, the applications of AgNPs obtained by mycosynthesis, the patents generated to date in this field, and the limitations encountered by researchers in the area.

Single-Step Synthesis of Ag Hexagonal Nanoplate-Decorated Reduced Graphene Oxide and Its Cytotoxicity Studies

Graphene-based Ag nanocomposites are of specific interest because of their unique properties and applications, especially in the field of cytotoxicity. However, developing a simple method to synthesize reduced graphene oxide (rGO)/silver hexagonal nanoplate (Ag HNPT) (rGO-Ag HNPT) nanocomposites with well-defined morphology has been believed to be a major challenge. In this work, a facile, robust, and single-step synthesis method was developed to prepare silver-graphene (rGO-Ag HNPT) nanocomposites with hexagonal-structured silver nanoplates without any templates. The primary characterizations of the synthesized nanocomposite were done using a UV-visible spectrophotometer, X-ray diffraction (XRD), and Raman spectroscopy. The formation of uniformed hexagonal-shaped Ag nanoplates was confirmed by high-resolution transmission electron microscopy (HR-TEM), and the elemental composition was confirmed using energy dispersive X-ray analysis (EDX). With SiHa cervical cancer cells, the short-term in vitro cytotoxicity of the as-synthesized rGO-Ag HNPTs was evaluated by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The anticancer response of the rGO-Ag HNPTs was investigated using an MTT assay.

Green Synthesis of Silver Nanoparticles Loaded Hydrogel for Wound Healing; Systematic Review

Wound healing is a biological process that involves a series of consecutive process, and its impairment can lead to chronic wounds and various complications. Recently, there has been a growing interest in employing nanotechnology to enhance wound healing. Silver nanoparticles (AgNPs) have expanded significant attention due to their wide range of applications in the medical field. The advantages of AgNPs include their easy synthesis, change their shape, and high surface area. Silver nanoparticles are very efficient for topical drug administration and wound healing because of their high ratio of surface area to volume. The efficiency of AgNPs depends on the synthesis method and the intended application. Green synthesis methods offer an eco-friendly approach by utilizing natural sources such as plant extracts and fungus. The characterization of nanoparticles plays an important character, and it is accomplished through the use of several characterization methods such as UV-Vis spectroscopy, Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). These techniques are employed to confirm the specific characters of the prepared Silver Nanoparticles. Additionally, the review addresses the challenges and future perspectives of utilizing green-synthesized AgNPs loaded in Polyacrylamide hydrogel for wound healing applications, including the optimization of nanoparticle size, and release kinetics. Overall, this review highlights the potential of green-synthesized AgNPs loaded in Polyacrylamide hydrogel as promising for advanced wound healing therapies. There are different approaches of usage of AgNPs for wound healing such as polyacrylamide -hydrogels, and the mechanism after their antibacterial action, have been exposed.

Adsorption potential of ionic liquid-modified ZnO nanoparticles for highly efficient removal of azo dye: detailed isotherms and kinetics

In this study, bare and ionic liquid-modified ZnO nanoparticles have been fabricated using microwave irradiation method. The fabricated nanoparticles were characterized by different techniques, viz. XRD, FT-IR, FESEM, and UV-Visible spectroscopy, and were explored as adsorbent for effective sequestration of azo dye (Brilliant Blue R-250) from aqueous media. Various factors affecting the adsorption efficiency of synthesized nanoparticles (bare/ionic liquid-modified) such as concentration of dye, pH of reaction media, dose of nanoparticles, and reaction time were thoroughly investigated with varying experimental conditions; on a magnetic stirrer and in a sonicator. The results exhibited a high adsorption efficiency of ionic liquid-modified nanoparticles for removal of dye as compared to the bare one. Also, an enhanced adsorption was observed via sonication in comparison with magnetic stirring. Different isotherms such as Langmuir, Freundlich, and Tempkin were elaborated. Evaluation of adsorption kinetics showed a linear pseudo-second-order equation for adsorption process. The exothermic and spontaneous nature of adsorption was further confirmed by thermodynamic investigations. As per the results obtained, it is suggested that the fabricated ionic liquid-modified ZnO nanoparticles could successfully remediate the toxic anionic dye from aqueous media. Hence, this system can be utilized for large-scale industrial applications.

A Review of Analytical Techniques for the Determination and Separation of Silver Ions and Its Nanoparticles

Many articles have already been published dealing with silver ions and its nanoparticles, but mostly from the environmental and toxicological point of view. This article is a review focused on the various analytical techniques and detection platforms used in the separation and determination of mentioned above species, especially on the trace concentration level. Commonly used are optical methods because of their high sensitivity and easy automation. The separation methods are mainly used for the separation and preconcentration of silver particles. Their combination with other analytical techniques, mainly inductively coupled plasma mass spectrometry (ICP-MS) leads to very low detection limits of analysis. The electrochemical methods are also powerful and perspective mainly because of the fabrication of new sensors designed for silver determination. All methods may be combined with each other to achieve a synergistic improvement of analytical parameters with an impact on sensitivity, selectivity and reliability. The paper comprises a review of all three types of analytical methods on the determination of trace quantities of silver ions and its nanoparticles.

Toxicological Aspects, Safety Assessment, and Green Toxicology of Silver Nanoparticles (AgNPs)—Critical Review: State of the Art

In recent years, research on silver nanoparticles (AgNPs) has attracted considerable interest among scientists because of, among other things, their alternative application to well-known medical agents with antibacterial properties. The size of the silver nanoparticles ranges from 1 to 100 nm. In this paper, we review the progress of research on AgNPs with respect to the synthesis, applications, and toxicological safety of AgNPs, and the issue of in vivo and in vitro research on silver nanoparticles. AgNPs’ synthesis methods include physical, chemical, and biological routes, as well as “green synthesis”. The content of this article covers issues related to the disadvantages of physical and chemical methods, which are expensive and can also have toxicity. This review pays special attention to AgNP biosafety concerns, such as potential toxicity to cells, tissues, and organs.

Assessing the effects of silver nanoparticles on the ecophysiology of Gammarus roeseli

Being part of the macrobenthic fauna, gammarids are efficient indicators of contamination of aquatic ecosystems by nanoparticles that are likely to sediment on the bottom. The present study investigates the effects of silver nanoparticles (nAg) on ecophysiological functions in Gammarus roeseli by using a realistic scenario of contamination. Indeed, an experiment was conducted during 72 h, assessing the effects of 5 silver nAg from 10 to 100 nm diluted at concentrations of maximum 5 µg L^-1 in a natural water retrieved from a stream and supplemented with food. The measured endpoints in gammarids were survival, silver concentrations in tissues, consumption of oxygen and ventilation of gills. Additionally, a set of biomarkers of the energetic metabolism was measured. After a 72-h exposure, results showed a concentration-dependent increase of silver levels in G. roeseli that was significant for the smallest nAg size (10 nm). Ecophysiological responses in G. roeseli were affected and the most striking effect was a concentration-dependent increase in oxygen consumption especially for the smallest nAg (10 to 40 nm), whereas ventilation of gills by gammarids was not changed. The potential mechanisms underlying these findings are discussed. Thus, we demonstrated the very low exposure concentration of 0.5 µg L^-1 for the small nAg size led to significant ecophysiological effects reinforcing the need to further investigate subtle effects on nanoparticles on aquatic organisms.

Fusarium oxysporum; its enhanced entomopathogenic activity with acidic silver nanoparticles against Rhipicephalus microplus ticks

Fusarium oxysporum is an entomopathogenic fungus, and it has anti-biological activity against arthropods. Ticks are blood sucking arthropods which are responsible for transmitting different diseases in humans and animals. The use of chemical insecticides against ticks is not eco-friendly option and results in the development of acaricide resistance. Previously, we had cultured a local isolate of Fusarium oxysporum from soil samples which were identified through microscopy and confirmed through molecular technique. In our previous experiments, we have prepared Silver nanoparticles (AgNP) at pH 7 and they had been characterized through X-Ray Diffraction (XRD), UV-visible and zeta-potential. In our current study, the AgNP were prepared at different pH conditions and characterized through Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The protein molecules of F. oxysporum were charged with Ag ions. F. oxysporum NP were observed to enhance anti-biological activity by killing Rhipicephalus microplus and they caused 100% mortality at pH 4 and pH 5 in 24 h in anti-tick biological assay. Our study is the first report to do biological assay against Rhipicehalus ticks by using Fusarium AgNP at acidic pH. Biological control using entomopathogenic fungi can be the best alternative of the chemical method to control the tick population.

Tutorial review on the processing and performance of fabrics with antipathogenic inorganic agents

Functionalized textiles have been increasingly used for enhancing antimicrobial or antiviral (antipathogenic) action. Those pathogens can cause recurring diseases by direct or indirect transmission. Particularly, airborne microorganisms may cause respiratory diseases or skin infections like allergies and acne and the use of inorganic agents such as metal and metal oxides has proven effective in antipathogen applications. This review is a tutorial on how to obtain functional fabric with processes easily applied for industrial scale. Also, this paper summarizes relevant textiles and respective incorporated inorganic agents, including their antipathogenic mechanism of action. In addition, the processing methods and functional finishing, on a laboratory and industrial scale, to obtain a functional textile are shown. Characterization techniques, including antipathogenic activity and durability, mechanical properties, safety, and environmental issues, are presented. Challenges and perspectives on the broader use of antipathogenic fabrics are discussed.

Prepared activated carbon from hazelnut shell where coated nanocomposite with Ag+ used for antibacterial and adsorption properties

In this research, prepared activated carbon by H₃PO₄ from hazelnut shells was coated with silver ions for the preparation of nanoparticles which were mixed in two ratios (1:0.5 and 1:1) by using of chemical reduction method. The adsorption capacity of activated carbons has been proven by BET and iodine number. Then, the antimicrobial effect of nanoparticles on the Staphylococcus aureus and Escherichia coli was investigated; in addition to that, the characterization of hazelnut shell and silver-coated activated carbons was determined by Brunauer-Emmett-Teller (BET), scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD) methods. The optimum condition of activated carbon from hazelnut shells indicated that 66.01% carbon content within 36.22% efficiency, while BET surface area achieved as 1208 m2/g and its contained 0.6104 cm3 g^-1 total pore volume. The microbial effect indicated that 105 CFU/mL of E. coli was completely inhibited in 30 min. Silver-coated activated carbon showed excellent bacteriostatic activity against E. coli and S. aureus. The results show that the composite has good prospects for applications in drinking water. E. coli of 10⁴ CFU/mL in drinking water were destroyed within 25 min of contact with the filter made with AgAC.

Mycosynthesis of Metal-Containing Nanoparticles-Synthesis by Ascomycetes and Basidiomycetes and Their Application

Fungi contain species with a plethora of ways of adapting to life in nature. Consequently, they produce large amounts of diverse biomolecules that can be generated on a large scale and in an affordable manner. This makes fungi an attractive alternative for many biotechnological processes. Ascomycetes and basidiomycetes are the most commonly used fungi for synthesis of metal-containing nanoparticles (NPs). The advantages of NPs created by fungi include the use of non-toxic fungus-produced biochemicals, energy efficiency, ambient temperature, pressure conditions, and the ability to control and tune the crystallinity, shape, and size of the NPs. Furthermore, the presence of biomolecules might serve a dual function as agents in NP formation and also capping that can tailor the (bio)activity of subsequent NPs. This review summarizes and reviews the synthesis of different metal, metal oxide, metal sulfide, and other metal-based NPs mediated by reactive media derived from various species. The phyla ascomycetes and basidiomycetes are presented separately. Moreover, the practical application of NP mycosynthesis, particularly in the fields of biomedicine, catalysis, biosensing, mosquito control, and precision agriculture as nanofertilizers and nanopesticides, has been studied so far. Finally, an outlook is provided, and future recommendations are proposed with an emphasis on the areas where mycosynthesized NPs have greater potential than NPs synthesized using physicochemical approaches. A deeper investigation of the mechanisms of NP formation in fungi-based media is needed, as is a focus on the transfer of NP mycosynthesis from the laboratory to large-scale production and application.

Synthetic Conditions, Physical Properties, and Antibacterial Activities of Silver Nanoparticles with Exopolysaccharides of a Medicinal Fungus

Natural polysaccharides are attractive and promising biomacromolecules for the green synthesis of silver nanoparticles (Ag NPs) with a broad spectrum of useful functions. This study aims to evaluate the synthetic conditions and physical properties of Ag NPs using three fractions of exopolysaccharide (EPS), namely EPS-1, EPS-2, and EPS-3, produced by a medicinal fungus known as Cs-HK1, with variations in their chemical composition and molecular weight. Each of the EPS fractions had a unique set of optimal synthetic conditions (reaction time course, temperature, and reagent concentration), resulting in a specific range of Ag NP size distributions. The Ag NPs synthesized with the EPS-1 fraction had the smallest particle size (~160 nm) and the most significant antibacterial activities against Escherichia coli (Gram-) and Staphylococcus aureus (Gram+), with a minimal inhibitory concentration (MIC) of 0.2 mg/mL on E. coli and 0.075 mg/mL on S. aureus. The results proved the success of the scheme of this green synthesis scheme with all three EPS fractions and the potential antibacterial application of EPS-coated Ag NPs.

Self-Powered Electrodeposition System for Sub-10-nm Silver Nanoparticles with High-Efficiency Antibacterial Activity

Recently, silver nanoparticles (AgNPs) have been widely applied in sterilization due to their excellent antibacterial properties. However, AgNPs require rigorous storage conditions because their antibacterial performances are significantly affected by environmental conditions. Instant fabrication provides a remedy for this drawback. In this study, we propose a self-powered electrodeposition system to synthesize sub-10-nm AgNPs, consisting of a triboelectric nanogenerator (TENG) as the self-powered source, a capacitor for storing electrical energy from the TENG, and an electrochemical component for electrodeposition. The self-powered system with larger capacitance and discharging voltage tends to deliver smaller AgNPs due to the nucleation mechanism dominated by current density. Furthermore, antibacterial tests reveal that compared to direct current (DC) electrodeposition, the TENG-based electrodeposition can synthesize finer-sized AgNPs (<10 nm) with overwhelming antibacterial effect against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) (with 100% efficiency at 2 h). This work provides a new strategy for the self-powered, instant, and controllable electrodeposition of nanoparticles.

Superior in vivo Wound-Healing Activity of Mycosynthesized Silver Nanogel on Different Wound Models in Rat

Wound healing is a complex phenomenon particularly owing to the rise in antimicrobial resistance. This has attracted the attention of the scientific community to search for new alternative solutions. Among these, silver being antimicrobial has been used since ancient times. Considering this fact, the main goal of our study was to evaluate the wound-healing ability of mycofabricated silver nanoparticles (AgNPs). We have focused on the formulation of silver nanogel for the management of wounds in albino Wistar rats. Mycosynthesized AgNPs from Fusarium oxysporum were used for the development of novel wound-healing antimicrobial silver nanogel with different concentrations of AgNPs, i.e., 0.1, 0.5, and 1 mg g^-1. The formulated silver nanogel demonstrated excellent wound-healing activity in the incision, excision, and burn wound-healing model. In the incision wound-healing model, silver nanogel at a concentration of 0.5 mg g^-1 exhibited superior wound-healing effect, whereas in the case of excision and burn wound-healing model, silver nanogel at the concentrations of 0.1 and 1 mg g^-1 showed enhanced wound-healing effect, respectively. Moreover, silver nanogel competently arrests the bacterial growth on the wound surface and offers an improved local environment for scald wound healing. Histological studies of healed tissues and organs of the rat stated that AgNPs at less concentration (1 mg g^-1) do not show any toxic or adverse effect on the body and promote wound healing of animal tissue. Based on these studies, we concluded that the silver nanogel prepared from mycosynthesized AgNPs can be used as a promising antimicrobial wound dressing.

Mycology-Nanotechnology Interface: Applications in Medicine and Cosmetology

In today's time, nanotechnology is being utilized to develop efficient products in the cosmetic and pharmaceutical industries. The application of nanotechnology in transforming bioactive material into nanoscale products substantially improves their biocompatibility and enhances their effectiveness, even when used in lower quantities. There is a significant global market potential for these nanoparticles because of which research teams around the world are interested in the advancements in nanotechnology. These recent advances have shown that fungi can synthesize metallic nanoparticles via extra- and intracellular mechanisms. Moreover, the chemical and physical properties of novel metallic nanoparticles synthesised by fungi are improved by regulating the surface chemistry, size, and surface morphology of the nanoparticles. Compared to chemical synthesis, the green synthesis of nanoparticles offers a safe and sustainable approach for developing nanoparticles. Biosynthesised nanoparticles can potentially enhance the bioactivities of different cellular fractions, such as plant extracts, fungal extracts, and metabolites. The nanoparticles synthesised by fungi offer a wide range of applications. Recently, the biosynthesis of nanoparticles using fungi has become popular, and various ways are being explored to maximize nanoparticles synthesis. This manuscript reviews the characteristics and applications of the nanoparticles synthesised using the different taxa of fungi. The key focus is given to the applications of these nanoparticles in medicine and cosmetology.

Detect the Antibacterial and Antitumor of synthesized Silver Nanoparticles Using Microbacterium sp

Metal nanoparticles are widely utilized in biotechnology and biomedicine for various applications, including medication delivery, imaging, and bacterial growth control. Silver nanoparticles (AgNPs) were synthesized by bacteria, fungi, algae, and plants. The Study aimed to synthesize nanomaterial with a cost-effective, environmentally friendly, and the uses of AgNPs as antibacterial (against pathogenic bacteria) and anticancer (on MCF7 cell line). In this Study, bacteria were collected from different soil samples. Isolated, purified by selective media, identification genotypically by 16rRNA sequencing analysis, then compared with NCBI, GenBank as Microbacterium sp. Biosynthesis of silver nanoparticles using Microbacterium for extracellular synthesis by reducing silver ions to silver nanoparticles. The color change to brown and reddish-brown was the first indication of the AgNPs formation; physical characterization using UV-Visible spectroscopy showed a wavelength in 489 nm, while X-ray diffraction (XRD) revealed that the silver nanoparticles were crystalline; transmission electron microscope (TEM) image showed that AgNPs spherical in shape with an average diameter of around 50 nm, in SEM (Scanning electron microscope) AgNPs formed with a diameter of 41-44 nm, spherical and uniform, while Energy-dispersive X-ray show very high silver peaks. Bioactivity of AgNPs by antimicrobial on pathogenic bacteria, which collected from Al- Sadr hospital in Misan (identified by using VITEK). This experiment showed that the inhibition zone was rung from (6- 38mm) on pathogenic bacteria; it was tremendous compared with antibiotics (Gentamycin in this project ranged from(7-28.5mm). Antitumor activity of extracellular biosynthesized AgNPs was determined using the MTT test against breast cancer cells (MCF7 cell line), which showed very high results. AgNPs inhibition breast cancer cell line by about 81% at 100ug/ml, indicating that the rate is outstanding. Finally, different biomedical approaches can benefit from AgNPs as antibacterial agents and anticancer agents with many results. Keywords. Silver Nanoparticles, Biosynthesis, Antibacterial, and Antitumor.

Overview of the Influence of Silver, Gold, and Titanium Nanoparticles on the Physical Properties of PEDOT:PSS-Coated Cotton Fabrics

Metallic nanoparticles have been of interest to scientists, and they are now widely used in biomedical and engineering applications. The importance, categorization, and characterization of silver nanoparticles, gold nanoparticles, and titanium nanoparticles have been discussed. Poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) is the most practical and reliable conductive polymer used in the manufacturing of conductive textiles. The effects of metallic nanoparticles on the performance of PEDOT:PSS thin films are discussed. The results indicated that the properties of PEDOT:PSS significantly depended on the synthesis technique, doping, post-treatment, and composite material. Further, electronic textiles known as smart textiles have recently gained popularity, and they offer a wide range of applications. This review provides an overview of the effects of nanoparticles on the physical properties of PEDOT:PSS-coated cotton fabrics.

Nanobioremediation: A sustainable approach for the removal of toxic pollutants from the environment

In recent years, the proportion of organic and inorganic contaminants has increased rapidly due to growing human interference and represents a threat to ecosystems. The removal of these toxic pollutants from the environment is a difficult task. Physical, chemical and biological methods are implemented for the degradation of toxic pollutants from the environment. Among existing technologies, bioremediation in combination with nanotechnology is the most promising and cost-effective method for the removal of pollutants. Numerous studies have shown that exceptional characteristics of nanomaterials such as improved catalysis and adsorption properties as well as high reactivity have been subjects of great interest. There is an emerging trend of employing bacterial, fungal and algal cultures and their components, extracts or biomolecules as catalysts for the sustainable production of nanomaterials. They can serve as facilitators in the bioremediation of toxic compounds by immobilizing or inducing the synthesis of remediating microbial enzymes. Understanding the association between microorganisms, contaminants and nanoparticles (NPs) is of crucial importance. In this review, we focus on the removal of toxic pollutants using the cumulative effects of nanoparticles with microbial technology and their applications in different domains. Besides, we discuss how this novel nanobioremediation technique is significant and contributes towards sustainability.

Breathability performance of antiviral cloth masks treated with silver nanoparticles for protection against COVID-19

The global widespread of coronavirus disease 2019 (COVID-19) has caused shortage of medical face masks and led to developing of various types of cloth masks with different levels of protection and comfort to meet the market demands. Breathing comfort is a significant aspect that should be considered during the design of cloth masks along with the filtration efficiency; otherwise, the wearer will feel suffocated. In this work, different types of cotton and polyester knitted fabrics blended with spandex yarns were produced and treated with silver nanoparticles to be used as antiviral cloth masks. Scanning electron microscope, transmission electron microscope, and EDX were used to characterize the silver nanoparticles (AgNPs). Antiviral activity was assessed against SARS-CoV-2 coronavirus as well. The influence of using different fabric materials, number of layers, and hybrid layers on their air permeability and breathability were investigated to evaluate the comfortability of the cloth masks. Physiological impacts of wearing the cloth masks were evaluated by measuring oxygen saturation of hemoglobin and heart rate of the wearers while doing various activities. The results indicated that AgNPs have low cytotoxicity and considerable efficiency in inhibition of SARS-CoV-2. Adding spandex yarns with different count and ratios reduced the porosity and air permeability of the fabrics. Moreover, the combination of three hybrid layers' mask made of polyester fabric in the outer layer with 100% cotton fabric in the inner layer showed high comfortability associated with high air permeability and breathability. Also, wearing these masks while doing activities showed no significant effect on blood oxygen saturation and heart rate of the wearers.

Antimicrobial TiN-Ag Coatings in Leather Insole for Diabetic Foot

This work reports on TiN-Ag antimicrobial coatings deposited by d.c. magnetron sputtering on leather used for insoles on the footwear industry, studies involving the antimicrobial properties of Ag-based functionalized leathers by sputtering techniques are shown. The X-ray diffraction (XRD) results suggested the presence of crystalline fcc-TiN phase for the sample without silver, and also a fcc-Ag phase in the samples containing silver. According to the Scanning Electron Microscopy (SEM) analysis, the coatings were homogeneous and dispersed Ag clusters were detected on the surface of samples with silver content above 8 at. %. The Inductively coupled plasma-optical emission spectrometry (ICP-OES) analysis showed that the ionization of silver over time depends on the morphology of the coatings. The samples did not present cytotoxicity and only samples with incorporated silver presented antibacterial and antifungal activity, highlighting the potential of the TiN-Ag insole coatings for diseases such as diabetic foot.

Eco-Friendly Synthesis of Silver Nanoparticles Using Pulsed Plasma in Liquid: Effect of Surfactants

Silver (Ag) nanoparticles were successfully prepared by using the in-liquid pulsed plasma technique. This method is based on a low voltage, pulsed spark discharge in a dielectric liquid. We explore the effect of the protecting ligands, specifically Cetyl Trimethylammonium Bromide (CTAB), Polyvinylpyrrolidone (PVP), and Sodium n-Dodecyl Sulphate (SDS), used as surfactant materials to prevent nanoparticle aggregation. The X-Ray Diffraction (XRD) patterns of the samples confirm the face-centered cubic crystalline structure of Ag nanoparticles with the presence of Ag2O skin. Scanning Transmission Electron Microscopy (STEM) reveals that spherically shaped Ag nanoparticles with a diameter of 2.2 ± 0.8 nm were synthesised in aqueous solution with PVP surfactant. Similarly, silver nanoparticles with a peak diameter of 1.9 ± 0.4 nm were obtained with SDS surfactant. A broad size distribution was found in the case of CTAB surfactant.

Nano-reduction of gold and silver ions: A perspective on the fate of microbial laccases as potential biocatalysts in the synthesis of metals (gold and silver) nano-particles

•

Potential involvements of microbial laccases in the synthesis of silver and gold nanoparticles have been comprehensively assessed.

•

Treasured roles of microbes and associated enzymes in synthesis of gold and silver nanoparticles have also been presented.

•

As potential green biocatalysts for the synthesis of metal nanoparticles, microbial laccases may be promisingly used.

•

Methodologies as well as involved possible mechanisms have been discussed in details in order to disclose the effectiveness of microbial laccases in the synthesis of gold and silver nanoparticles.

•

Different characterization results of synthesized gold and silver nanoparticles based on UV–Vis spectra, XRD, SEM, TEM and other techniques have also been discussed.

•

Mechanistic evaluation also shows a hope for the effectiveness of microbial laccases in the synthesis of other metal nanoparticles.

Nanoparticles of metals have momentous place in the field of biological as well as pharmaceutical chemistry due to which in the present scenario of the research, this field is of auspicious interest. Synthesis of metal nanoparticles via microbial assistance is a burning field for their green synthesis. In this direction, microbial enzymes play significant role, out of which microbial laccases may also be a talented biocatalyst for the synthesis of metal nanoparticles considering its efficacy and interesting promising biological applications. A very little works are known on the role of microbial laccases in the synthesis of metal nanoparticles but after effective scrutiny of their reported works on the synthesis of gold and silver nanoparticles, its fate as potential biocatalyst in the synthesis of metals nanoparticles is being automatically established. Thus, this perspective commendably appraises the active applicability of microbial laccases in the synthesis of gold and silver nanoparticles by reducing their ions in suitable reaction environment.

Influence of glucose, sucrose, and dextran coatings on the stability and toxicity of silver nanoparticles

Aqueous colloids, consisting of 15-30 nm-sized silver nanoparticles (Ag NPs), were prepared using the reducing and stabilizing abilities of glucose, sucrose, and dextran. The long-term stability of coated Ag NPs increases from glucose over sucrose to dextran, i.e., with the increase of the molecular weight of carbohydrate molecules. The density functional theory (DFT) calculations of the partial atomic (Mulliken) charges and adsorption energies are applied to explain the enhanced stability of coated Ag NPs. All coated Ag NPs have a significantly broader concentration range of nontoxic behavior toward pre-osteoblast cells than bare Ag NPs prepared using sodium borohydride. The carbohydrate-coated Ag NPs display the same level of toxic ability against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria as bare Ag NPs. The differences in toxicity mechanism of the coated and bare Ag NPs are a consequence of the absence and presence of co-occurring Ag+ ions in examined dispersion, respectively.

Biobased composites from agro-industrial wastes and by-products

The greater awareness of non-renewable natural resources preservation needs has led to the development of more ecological high-performance polymeric materials with new functionalities. In this regard, biobased composites are considered interesting options, especially those obtained from agro-industrial wastes and by-products. These are low-cost raw materials derived from renewable sources, which are mostly biodegradable and would otherwise typically be discarded. In this review, recent and innovative academic studies on composites obtained from biopolymers, natural fillers and active agents, as well as green-synthesized nanoparticles are presented. An in-depth discussion of biobased composites structures, properties, manufacture, and life-cycle assessment (LCA) is provided along with a wide up-to-date overview of the most recent works in the field with appropriate references. Potential uses of biobased composites from agri-food residues such as active and intelligent food packaging, agricultural inputs, tissue engineering, among others are described, considering that the specific characteristics of these materials should match the proposed application.

Biogenic Synthesis of Silver Nanoparticles, Characterization and Their Applications—A Review

With the growing awareness for the need of sustainable environment, the importance of synthesizing and the application of green nanoparticles has gained special focus. Among various metal nanoparticles, silver nanoparticles (AgNPs) have gain significant attention. AgNPs are synthesized conventionally by physical and chemical methods using chemicals such as reducing agents, which are hazardous to environment due to their toxic properties, provoking a serious concern to create and develop environment friendly methods. Thus, biological alternatives are emerging to fill gaps, such as green syntheses that use biological molecules taken from plant sources in the form of extracts, which have shown to be superior to chemical and physical approaches. These biological molecules derived from plants are assembled in a highly regulated manner to make them suitable for metal nanoparticle synthesis. The current review outlines the wide plant diversity that may be used to prepare a rapid and single-step procedure with a green path over the traditional ones, as well as their antifungal activity.

Biosynthesis of silver nanoparticles using endophytic Fusarium oxysporum strain NFW16 and their in vitro antibacterial potential

Nanotechnology has provided a platform for altering, modifying, and developing metal properties to nanoparticles with promising applications. This study aimed to produce functionalized and biocompatible silver nanoparticles (AgNPs) using cellular extracts of endophytic Fusarium oxysporum-NFW16 isolated from Taxus fauna and evaluate its antibacterial potential. Under optimized reaction conditions, well-dispersed and extremely stable AgNPs were synthesized in 1 hr. AgNPs were characterized through UV-visible spectrophotometry (at 423 nm), and scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The obtained AgNPs were spherical, monodispersed, and size was ~30-36.1 nm. Strong peaks of XRD (311), (220), (200), and (111) matched to silver plane's diffraction facets. FTIR spectra at 1,650, 2,950, and 1,400 cm^-1 confirmed the capping of AgNPs with phenolic compounds and compounds having primary amines. The AgNPs showed 100 μg/ml of minimum inhibitory concentration against methicillin-resistant Staphylococcus aureus (MRSA). In addition, AgNPs showed a synergistic effect with both vancomycin and ciprofloxacin against MRSA (25%), Pseudomonas aeruginosa (50%), and pus isolated Escherichia coli (50%). Moreover, AgNPs impregnated cotton and bandage showed in vitro antibacterial potential against American Type Culture Collection and skin-associated clinical pathogenic bacteria. Findings showed that endophytic fungi are the potential source for AgNPs synthesis that are effective against multidrug-resistant bacteria and the development of antimicrobial textile finishes.

Biological Synthesis of Nanocatalysts and Their Applications

Over the past few decades, the synthesis and potential applications of nanocatalysts have received great attention from the scientific community. Many well-established methods are extensively utilized for the synthesis of nanocatalysts. However, most conventional physical and chemical methods have some drawbacks, such as the toxicity of precursor materials, the requirement of high-temperature environments, and the high cost of synthesis, which ultimately hinder their fruitful applications in various fields. Bioinspired synthesis is eco-friendly, cost-effective, and requires a low energy/temperature ambient. Various microorganisms such as bacteria, fungi, and algae are used as nano-factories and can provide a novel method for the synthesis of different types of nanocatalysts. The synthesized nanocatalysts can be further utilized in various applications such as the removal of heavy metals, treatment of industrial effluents, fabrication of materials with unique properties, biomedical, and biosensors. This review focuses on the biogenic synthesis of nanocatalysts from various green sources that have been adopted in the past two decades, and their potential applications in different areas. This review is expected to provide a valuable guideline for the biogenic synthesis of nanocatalysts and their concomitant applications in various fields.

Biogenic Silver Nanoparticles: Synthesis and Application as Antibacterial and Antifungal Agents

The importance and need for eco-oriented technologies has increased worldwide, which leads to an enhanced development of methods for the synthesis of nanoparticles using biological agents. This review de-scribes the current approaches to the preparation of biogenic silver nanoparticles, using plant extracts and filtrates of fungi and microorganisms. The peculiarities of the synthesis of particles depending on the source of biocomponents are considered as well as physico-morphological, antibacterial and antifungal properties of the resulting nanoparticles which are compared with such properties of silver nanoparticles obtained by chemical synthesis. Special attention is paid to the process of self-assembly of biogenic silver nanoparticles.

Synthesis and Antibacterial Activity of Silver Nanoparticles Against Escherichia coli and Pseudomonas sp

Silver nanoparticles (AgNPs) have been synthesized by chemical reduction method using ascorbic acid as reducing agent. Silver nitrate (AgNO[Formula: see text] and sodium dodecyl sulfate (SDS) have been used as precursor and stabilizer, respectively. The prepared samples were characterized by UV-visible spectroscopy, scanning electron microscopy (SEM) and X-ray diffraction (XRD). The antibacterial activity of prepared silver nanoparticles has been assessed by using the disc diffusion method against pathogenic, gram-negative bacterial strains including Escherichia coli and Pseudomonassp. To evaluate the potential antibacterial properties of AgNPs, the discs have been impregnated and dried with three different doses like 50, 100 and 150[Formula: see text][Formula: see text]l of 20[Formula: see text][Formula: see text]g/ml concentrated AgNPs solution and placed on the Petri-dishes. The antibiotic kanamycin (5[Formula: see text][Formula: see text]g) was used as control. In all the cases, a clear and distinct zone of inhibition is observed, which suggests that AgNPs can be used as effective growth inhibitors of various bacterial species and would be promising candidate for future development of antibacterial agents.

Comparative assessment of the fate and toxicity of chemically and biologically synthesized silver nanoparticles to juvenile clams

Nanoparticles (NPs) can be produced via physical, chemical, or biological approaches. Yet, the impact of the synthesis approaches on the environmental fate and effects of NPs is poorly understood. Here, we synthesized AgNPs through chemical and biological approaches (cit-AgNPs and bio-AgNPs), characterized their properties, and toxicities relative to commercially available Ag nanopowder (np-AgNPs) to the clam Mercenaria mercenaria. The chemical synthesis is based on the reduction of ionic silver using sodium borohydride as a reducing agent and trisodium citrate as a capping agent. The biological synthesis is based on the reduction of ionic silver using biomolecules extracted from an atoxigenic strain of a filamentous fungus Aspergillus parasiticus. The properties of AgNPs were determined using UV-vis, dynamic light scattering, laser Doppler electrophoresis, (single particle)-inductively coupled plasma-mass spectroscopy, transmission electron microscopy, and asymmetric flow-field flow fractionation. Both chemical and biological synthesis approaches generated spherical AgNPs. The chemical synthesis produced AgNPs with narrower size distributions than those generated through biological synthesis. The polydispersity of bio-AgNPs decreased with increases in cell free extract (CFE):Ag ratios. The magnitude of the zeta potential of the cit-AgNPs was higher than those of bio-AgNPs. All AgNPs formed aggregates in the test media i.e., natural seawater. Based on the same total Ag concentrations, all AgNPs were less toxic than AgNO₃. The toxicity of AgNPs toward the juvenile clam, Mercenaria mercenaria, decreased following the order np-AgNPs > cit-AgNPs > bio-AgNPs. Expressed as a function of dissolved Ag concentrations, the toxicity of Ag decreased following the order cit-AgNPs > bio-AgNPs > AgNO₃ ~ np-AgNPs. Therefore, the toxicity of AgNP suspensions can be attributed to a combined effect of dissolved and particulate Ag forms. These results indicate that AgNP synthesis methods determine their environmental and biological behaviors and should be considered for a more comprehensive environmental risk assessment of AgNPs.

Antimicrobial Activity and Mode of Action of Aspergillus terreus Strain (MTCC9618) Mediated Biosynthesized Silver Nanoparticles-AgNPs Against Staphylococcus aureus and Escherichia coli

Fungal approaches bio-synthesis of silver nanoparticles (AgNPs) have been given attention because of their cost effectiveness and environment friendliness. Therefore, fungal Aspergillus terreus (MTCC 9618) intermediated biosynthesis of AgNPs was conducted, and the SEM, EDS and XRD reports confirmed the synthesis of well-organized, structured and stabilized AgNPs. Antimicrobial efficacy of disk diffusion assay of AgNPs (10, 20 and 30[Formula: see text][Formula: see text]g/ml) dosage was confirmed against Staphylococcus aureus and Escherichia coli and found that has bactericidal effects against both strains. Broth assay was also confirmed through LB broth media and colony forming units (CFU) which defined that biosynthesized AgNPs had much potential effect against gram negative ([Formula: see text]ve) than gram positive ([Formula: see text]ve) due to its peptidoglycan thickness. AgNPs had adverse mode of action on both bacterial strains and resulting was found damaged site on cell wall, necrosis, shrinkage, influx out and ruptures of the cells according to SEM scanning profiles. This study promised to green and economical way of AgNPs biosynthesis along with targeted antimicrobial effects in food preservative, biomedical coating tools, fabrics and pharmaceutical industries.

Plant response to silver nanoparticles: a critical review

Although several metal ions/metal nanoparticles (NPs) are toxic to both plants and animals, some of them are used as nutrients and growth promoters. Plants exposed to silver nanoparticles (Ag-NPs) have shown both beneficial and harmful effects. All concentrations of Ag-NPs are not effective for a given plant because any excess can block the passage of essential nutrients. Regulated treatment of plants by Ag-NPs may enhance their overall growth and development. It has been noticed that Ag-NPs decrease the mass of edible plants (Cucurbita pepo, Allium cepa, cabbage, and lettuce) and vegetables, but they also induce the germination of seeds in many cases. NPs interact with proteins, enzymes, and carbohydrates influencing the total biomass, root, and shoot growth of plants. Also, Ag-NPs act as an ethylene inhibitor and activate the antioxidants in onions. Their substantial quantity becomes deposited in onion leaves and bulbs. Size and concentration are the two major factors responsible for the increase/decrease of plant growth and biomass. Plants make adaptations to reduce the toxicity caused by Ag-NPs. In some cases, Ag-NPs induce root elongation and increase chlorophyll, carbohydrate, proteins, rate of photosynthesis and inhibit the biosynthesis of ethylene. This review article provides a comprehensive overview of both the beneficial and adverse effects of Ag-NPs on germination, growth, development, physiological, and biochemical characteristics of a wide range of edible and crop plants. We have also critically discussed: the chemistry, toxicity, uptake, translocation, and accumulation of Ag-NPs in plant systems.

Toxicity and action mechanisms of silver nanoparticles against the mycotoxin-producing fungus Fusarium graminearum

•

AgNPs possess high activity towards fungicide-resistant strains.

•

AgNPs exert great activity against mycotoxin-producing fungus F. graminearum.

•

AgNPs induce the expression of two azole resistance-related ABC genes.

•

AgNPs lead to accumulation of toxisome and notorious mycotoxin DON by provoking ROS.

•

AgNPs combined with DON-reducing fungicides are recommended for FHB control.

Introduction

Fusarium graminearum is a most destructive fungal pathogen that causes Fusarium head blight (FHB) disease in cereal crops, resulting in severe yield loss and mycotoxin contamination in food and feed. Silver nanoparticles (AgNPs) are extensively applied in multiple fields due to their strong antimicrobial activity and are considered alternatives to fungicides. However, the antifungal mechanisms and the effects of AgNPs on mycotoxin production have not been well characterized.

Objectives

This study aimed to investigate the antifungal activity and mechanisms of AgNPs against both fungicide-resistant and fungicide-sensitive F. graminearum strains, determine their effects on mycotoxin deoxynivalenol (DON) production, and evaluate the potential of AgNPs for FHB management in the field.

Methods

Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and fluorescence microscopy were used to examine the fungal morphological changes caused by AgNPs. In addition, RNA-Seq, qRT-PCR, and western blotting were conducted to detect gene transcription and DON levels.

Results

AgNPs with a diameter of 2 nm exhibited effective antifungal activity against both fungicide-sensitive and fungicide-resistant strains of F. graminearum. Further studies showed that AgNP application could impair the development, cell structure, cellular energy utilization, and metabolism pathways of this fungus. RNA-Seq analysis and sensitivity determination revealed that AgNP treatment significantly induced the expression of azole-related ATP-binding cassette (ABC) transporters without compromising the control efficacy of azoles in F. graminearum. AgNP treatment stimulated the generation of reactive oxygen species (ROS), subsequently induced transcription of DON biosynthesis genes, toxisome formation, and mycotoxin production.

Conclusion

This study revealed the underlying mechanisms of AgNPs against F. graminearum, determined their effects on DON production, and evaluated the potential of AgNPs for controlling fungicide-resistant F. graminearum strains. Together, our findings suggest that combinations of AgNPs with DON-reducing fungicides could be used for the management of FHB in the future.

Microplastic fibers influence Ag toxicity and bioaccumulation in Eisenia andrei but not in Enchytraeus crypticus

Microplastic fibers (MF) are released from synthetic textiles during washing and end up in the wastewater. Similarly, silver nanoparticles (AgNP), incorporated in textiles as antimicrobial agents, are released in washing machines, also reaching the wastewater treatment plants. Therefore, both MF and AgNP co-exist in the environment and enter the soil compartment mainly via the application of biosolids. Yet, the combined effect of MF and AgNP has not been studied. Here, we assessed the effects of polyester MF on the toxicity of AgNP and AgNO₃ to the earthworm Eisenia andrei and the enchytraeid Enchytraeus crypticus. The organisms were exposed to a range of concentration of AgNP (32, 100, 320, 1000, 3200 mg Ag/kg) and AgNO₃ (12.8, 32, 80, 200, 500 mg Ag/kg) in LUFA 2.2 soil in the absence or presence of MF (0.01% DW). Reproduction tests were conducted and the toxicity outcomes compared between soils with and without MF. The exposure to MF caused a decrease in the number of juveniles and changed the biochemical composition of earthworms. Moreover, the presence of MF increased the toxicity of AgNP to earthworm reproduction (EC50 = 165 mg Ag/kg) when compared to AgNP exposure alone (EC50 = 450 mg Ag/kg), but did not alter the toxicity of AgNO₃ (EC50 = 40 mg Ag/kg). For enchytraeids, no significant difference in Ag toxicity could be detected when MF was added to the soil for both AgNP and AgNO₃. Overall, Ag bioaccumulation was not affected by MF, except for a decrease in earthworm body concentration at the highest Ag soil concentration (3200 mg Ag/kg). Our results suggest that the presence of MF in the soil compartment may be a cause of concern, and that the joint exposure to Ag may be deleterious depending on the Ag form, organism, and endpoint. The present work provides the first evidence that a realistic MF concentration in soil lowers AgNP concentration necessary to provoke reproductive impairment in earthworms. The influence of MF on the risk assessment of AgNP should be considered.