Sampling and Quality Assurance and Quality Control: A Guide for Scientists Investigating the Occurrence of Microplastics Across Matrices

Aerosolization of micro- and nanoplastics via sea spray: Investigating the role of polymer type, size, and concentration, and potential implications for human exposure

Micro- and nanoplastics (MNPs) can enter the atmosphere via sea spray aerosols (SSAs), but the effects of plastic characteristics on the aerosolization process are unclear. Furthermore, the importance of the transport of MNPs via these SSAs as a possible new exposure route for human health remains unknown. The aim of this study was two-fold: (1) to examine if a selection of factors affects aerosolization processes of MNPs, and (2) to estimate human exposure to MNPs via aerosols inhalation. A laboratory-based bubble bursting mechanism, simulating the aerosolization process at sea, was used to investigate the influence of MNP as well as seawater characteristics. To determine the potential human exposure to microplastics via inhalation of SSAs, the results of the laboratory experiments were extrapolated to the field based on sea surface microplastic concentrations and the volume of inhaled aerosols. Enrichment seemed to be influenced by MNP size, concentration and polymer type. With higher enrichment for smaller particles and denser polymers. Experiments with different concentrations showed a larger range of variability but nonetheless lower concentrations seemed to result in higher enrichment, presumably due to lower aggregation. In addition to the MNP characteristics, the type of seawater used seemed to influence the aerosolization process. Our human exposure estimate to microplastic via inhalation of sea spray aerosols shows that in comparison with reported inhaled concentrations in urban and indoor environments, this exposure route seems negligible for microplastics. Following the business-as-usual scenario on plastic production, the daily plastic inhalation in coastal areas in 2100 is estimated to increase but remain far below 1 particle per day. This study shows that aerosolization of MNPs is a new plastic transport pathway to be considered, but in terms of human exposure it seems negligible compared to other more important sources of MNPs, based on current reported environmental concentrations.

Do Antarctic bivalves present microdebris? The case of Livingston Island

Marine microdebris (MD) seem to be widespread in benthic invertebrates, even in the most remote areas of the planet such as Antarctica, although the information available is still very scarce. Here we provide a detailed quantification and characterization of the MD found on three common bivalve species (Aequiyoldia eightsii, Thracia cf. meridionalis, and Cyclocardia astartoides) inhabiting shallow areas in Johnsons' Bay, Livingston Island (South Shetland Islands, Antarctica) as a snapshot of the MD present. On average, these bivalves contained 0.71 ± 0.89 items per individual and 1.49 ± 2.35 items per gram, being comparable to the few previous existing studies in other Antarctic areas. Nearly half of the organisms analysed here (45.6 %), contained at least one item. No significant differences were found in the three bivalve species. As far as we know, this is the first study to analyse and compare MD in three bivalve species in the Antarctic Peninsula. Although our results indicate bivalves are as not as polluted as in other areas of the planet, this is remarkable since this is considered one of the last pristine areas of the world. Our results point to local activities as the main source of MD pollution in Livingston Island, although global pollution cannot be discarded. We believe this research provides a useful baseline for future studies and will contribute to develop policies and strategies to preserve Antarctic marine ecosystems from MD pollution.

Laboratory method for investigating the influence of industrial process conditions on the emission of polycyclic aromatic hydrocarbons from carbonaceous materials

This work is dedicated to developing a laboratory method for assessing emissions of polycyclic aromatic hydrocarbons (PAHs) from different carbon-based materials at elevated temperatures. The method will additionally contribute to enhancing the fundamental knowledge about the formation and decomposition of these compounds during various process conditions. Developing a method entails designing a setup for laboratory-scale experiments utilizing different furnace configurations and off-gas capturing media. To demonstrate the method's applicability, different carbon materials were tested under identical conditions, and analysis results for the same material in different furnace setups were compared. In this article, we have focused on the procedure for obtaining the "fingerprint" of PAH emissions under conditions characteristic of industrial processes.•Two setups for investigation of the influence of temperature on PAH emissions were designed and tested for three types of carbon materials.•The collected off-gas samples underwent analysis in two different laboratories to capture intra-laboratory differences and to evaluate the significance of the instrument detection limit.•The results of PAH 16 (16 EPA PAH) and PAH 42 analysis were compared to showcase the influence of the expanded list on the overall emission of PAH. The novel methodology enables the determination and comparison of PAH emissions during the thermal treatment of individual carbon materials under laboratory conditions. This could potentially be a new approach for predicting the PAH emissions in metallurgical industries that use these carbon materials as reducing agents in their processes and their control by optimizing process parameters and raw materials used. In addition to being suitable for simulating various conditions in the metallurgical industry, the utilization of low-hazard PAH solvents makes it a promising method.

Microplastics in Asian rivers: Geographical distribution, most detected types, and inconsistency in methodologies

Microplastics pose a significant environmental threat, with potential implications for toxic chemical release, aquatic life endangerment, and human food chain contamination. In Asia, rapid economic growth coupled with inadequate waste management has escalated plastic pollution in rivers, positioning them as focal points for environmental concern. Despite Asia's rivers being considered the most polluted with plastics globally, scholarly attention to microplastics in the region's freshwater environments is a recent development. This study undertakes a systematic review of 228 scholarly articles to map microplastic hotspots in Asian freshwater systems and synthesize current research trends within the continent. Findings reveal a concentration of research in China and Japan, primarily investigating riverine and surface waters through net-based sampling methods. Polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET) emerge as the predominant microplastic types, frequently observed as fibers or fragments. However, the diversity of sampling methodologies and reporting metrics complicates data synthesis, underscoring the need for standardized analytical frameworks to facilitate comparative analysis. This paper delineates the distribution of microplastic hotspots and outlines the prevailing challenges and prospects in microplastic research within Asian freshwater contexts.

Assessing the current state of plastic pollution research in Antarctica: Knowledge gaps and recommendations

Antarctica stands as one of the most isolated and pristine regions on our planet. Regardless, recent studies have evidenced the presence of plastic pollution in Antarctic environments and biota. While these findings are alarming and put into perspective the reach of plastic pollution, it is necessary to assess the current knowledge of plastic pollution in Antarctica. In the present review, an updated literature review of plastic pollution in multiple Antarctic environmental compartments and biota was conducted. Studies were cataloged based on environmental compartments (e.g., sediments, seawater, soil, atmosphere) and biota from different ecological niches. A detailed analysis of the main findings, as well as the flaws and shortcomings across studies, was conducted. In general terms, several studies have shown a lack of adequate sampling and analytical procedures for plastic research (particularly in the case of microplastics) and standard procedures; thus, compromising the reliability of the data reported and comparability across studies. Aiming to guide future studies and highlight research needs, a list of knowledge gaps and recommendations were provided based on the analysis and discussion of the literature and following standardized procedures.

Interactive effects between water temperature, microparticle compositions, and fiber types on the marine keystone species Americamysis bahia

Recently, there has been an increasing emphasis on examining the ecotoxicological effects of anthropogenic microparticles (MPs), especially microplastic particles, and related issues. Nevertheless, a notable deficiency exists in our understanding of the consequences on marine organisms, specifically in relation to microfibers and the combined influence of MPs and temperature. In this investigation, mysid shrimp (Americamysis bahia), an important species and prey item in estuarine and marine food webs, were subjected to four separate experimental trials involving fibers (cotton, nylon, polyester, hemp; 3 particles/ml; approximately 200 μm in length) or fragments (low-density Polyethylene: LDPE, polylactic acid: PLA, and their leachates; 5, 50, 200, 500 particles/ml; 1-20 μm). To consider the effects in the context of climate change, three different temperatures (22, 25, and 28 °C) were examined. Organismal growth and swimming behavior were measured following exposure to fragments and microfibers, and reactive oxygen species and particle uptake were investigated after microfiber exposure. To simulate the physical characteristics of MP exposure, such as microfibers obstructing the gills, we also assessed the post-fiber-exposure swimming behavior in an oxygen-depleted environment. Data revealed negligible fragment, but fiber exposure effects on growth. PLA leachate triggered higher activity at 25 °C and 28 °C; LDPE exposures led to decreased activity at 28 °C. Cotton exposures led to fewer behavioral differences compared to controls than other fiber types. The exposure to hemp fibers resulted in significant ROS increases at 28 °C. Microfibers were predominantly located within the gastric and upper gastrointestinal tract, suggesting extended periods of residence and the potential for obstructive phenomena over the longer term. The combination of increasing water temperatures, microplastic influx, and oxidative stress has the potential to pose risks to all components of marine and aquatic food webs.

The distribution of sediment microplastics assemblages is driven by location and hydrodynamics, not sediment characteristics, in the Gulf of Maine, USA

Microplastics (MP) are found in marine sediments across the globe, but we are just beginning to understand their spatial distribution and assemblages. In this study, we quantified MP in Gulf of Maine, USA sediments. MP were extracted from 20 sediment samples, followed by polymer identification using Raman spectroscopy. We detected 27 polymer types and 1929 MP kg-1 wet sediment, on average. Statistical analyses showed that habitat, hydrodynamics, and station proximity were more important drivers of MP assemblages than land use or sediment characteristics. Stations closer to one another were more similar in their MP assemblages, tidal rivers had higher numbers of unique plastic polymers than open water or embayment stations, and stations closer to shore had higher numbers of MP. There was little evidence of relationships between MP assemblages and land use, sediment texture, total organic carbon, or contaminants.

Regression analysis for the determination of microplastics in sediments using differential scanning calorimetry

This research addresses the growing need for fast and cost-efficient methods for microplastic (MP) analysis. We present a thermo-analytical method that enables the identification and quantification of different polymer types in sediment and sand composite samples based on their phase transition behavior. Differential scanning calorimetry (DSC) was performed, and the results were evaluated by using different regression models. The melting and crystallization enthalpies or the change in heat capacity at the glass transition point were measured as regression analysis data. Ten milligrams of sea sand was spiked with 0.05 to 1.5 mg of microplastic particles (size: 100 to 200 µm) of the semi-crystalline polymers LD-PE, HD-PE, PP, PA6, and PET, and the amorphous polymers PS and PVC. The results showed that a two-factorial regression enabled the unambiguous identification and robust quantification of different polymer types. The limits of quantification were 0.13 to 0.33 mg and 0.40 to 1.84 mg per measurement for semi-crystalline and amorphous polymers, respectively. Moreover, DSC is robust with regard to natural organic matrices and allows the fast and non-destructive analysis of microplastic within the analytical limits. Hence, DSC could expand the range of analytical methods for microplastics and compete with perturbation-prone chemical analyses such as thermal extraction-desorption gas chromatography-mass spectrometry or spectroscopic methods. Further work should focus on potential changes in phase transition behavior in more complex matrices and the application of DSC for MP analysis in environmental samples.

How many microplastics do you need to (sub)sample?

Analysis of microplastics in the environment requires polymer characterization as a confirmation step for suspected microplastic particles found in a sample. Material characterization is costly and can take a long time per particle. When microplastic particle counts are high, many researchers cannot characterize every particle in their sample due to time or monetary constraints. Moreover, characterizing every particle in samples with high plastic particle counts is unnecessary for describing the sample properties. We propose an a priori approach to determine the number of suspected microplastic particles in a sample that should be randomly subsampled for characterization to accurately assess the polymer distribution in the environmental sample. The proposed equation is well-founded in statistics literature and was validated using published microplastic data and simulations for typical microplastic subsampling routines. We report values from the whole equation but also derive a simple way to calculate the necessary particle count for samples or subsamples by taking the error to the power of negative two. Assuming an error of 0.05 (5 %) with a confidence interval of 95 %, an unknown expected proportion, and a sample with many particles (> 100k), the minimum number of particles in a subsample should be 386 particles to accurately characterize the polymer distribution of the sample, given the particles are randomly characterized from the full population of suspected particles. Extending this equation to simultaneously estimate polymer, color, size, and morphology distributions reveals more particles (620) would be needed in the subsample to achieve the same high absolute error threshold for all properties. The above proposal for minimum subsample size also applies to the minimum count that should be present in samples to accurately characterize particle type presence and diversity in a given environmental compartment.

Microplastics, their abundance, and distribution in water and sediments in North Chennai, India: An assessment of pollution risk and human health impacts

Plastic particles, measuring <5 mm in size, mainly originate from larger plastic debris undergoing degradation, fragmenting into even smaller fragments. The goal was to analyze the spatial diversity and polymer composition of microplastics (MPs) in North Chennai, South India, aiming to evaluate their prevalence and features like composition, dimensions, color, and shape. In 60 sediment samples, a combined count of 1589 particles were detected, averaging 26 particles per 5 g-1 of dry sediment. The water samples from the North Chennai vicinity encompassed a sum of 1588 particles across 71 samples, with an average of 22 items/L. The majority of MPs ranged in size from 1 mm to 500 μm. The ATR-FTIR results identified the predominant types of MPs as polystyrene, polyvinyl chloride, polyethylene, polyethylene terephthalate, and polypropylene in sediment and water. The spatial variation analysis revealed high MPs concentration in landfill sites, areas with dense populations, and popular tourist destinations. The pollution load index in water demonstrated that MPs had contaminated all stations. Upon evaluating the polymeric and pollution risks, it was evident that they ranged from 5.13 to 430.15 and 2.83 to 15,963.2, which is relatively low to exceedingly high levels. As the quantity of MPs and hazardous polymers increased, the level of pollution and corresponding risks also escalated significantly. The existence of MPs in lake water, as opposed to open well water, could potentially pose a cancer risk for both children and adults who consume it. Detecting MPs in water samples highlights the significance of implementing precautionary actions to alleviate the potential health hazards they create.

Turning plastics/microplastics into valuable resources? Current and potential research for future applications

Plastics are a wide range of synthetic or semi-synthetic materials, mainly consisting of polymers. The use of plastics has increased to over 300 million metric tonnes in recent years, and by 2050, it is expected to grow to 800 million. Presently, a mere 10% of plastic waste is recycled, with approximately 75% ended up in landfills. Inappropriate disposal of plastic waste into the environment poses a threat to human lives and marine species. Therefore, this review article highlights potential routes for converting plastic/microplastic waste into valuable resources to promote a greener and more sustainable environment. The literature review revealed that plastics/microplastics (P/MP) could be recycled or upcycled into various products or materials via several innovative processes. For example, P/MP are recycled and utilized as anodes in lithium-ion (Li-ion) and sodium-ion (Na-ion) batteries. The anode in Na-ion batteries comprising PP carbon powder exhibits a high reversible capacity of ∼340 mAh/g at 0.01 A/g current state. In contrast, integrating Fe3O4 and PE into a Li-ion battery yielded an excellent capacity of 1123 mAh/g at 0.5 A/g current state. Additionally, recycled Nylon displayed high physical and mechanical properties necessary for excellent application as 3D printing material. Induction heating is considered a revolutionary pyrolysis technique with improved yield, efficiency, and lower energy utilization. Overall, P/MPs are highlighted as abundant resources for the sustainable production of valuable products and materials such as batteries, nanomaterials, graphene, and membranes for future applications.

Identifying laboratory sources of microplastic and nanoplastic contamination from the air, water, and consumables

Microplastic and nanoplastic research has proliferated in recent years in response to the escalating plastic pollution crisis. However, a lack of optimised methods for sampling and sample processing has potential implications for contaminating samples resulting in an overestimation of the quantity of microplastics and nanoplastics present in environmental samples. In response, a series of recommendations have been made, but most have not been quantified or validated sources of contamination. In the present study, we investigated sources of plastic contamination in common laboratory procedures including water sources (e.g., Milli-Q), consumables (e.g., unburnt glassware), airflow (e.g., fume hood) and dust. Using flow cytometry, we identified water, air flow and dust as sources of significant contamination. Milli-Q and reverse osmosis were the least contaminated sources when compared with tap water. Interestingly, current recommendations are to use glass consumables in replacement of plastic consumables, however, we have identified glassware and glass consumables as a significant source of contamination. Current best practice is to cover the glass tube with aluminium foil to reduce airborne contamination, but we found fresh aluminium foil to be a significant source of contamination, bringing light to the limitations foil has as a contamination control measure. Lastly, we identified significant quantities of microplastics and nanoplastics present in dust collected within the laboratory, suggesting this is a widespread and underestimated source of contamination. We have provided validated sources of contamination for both consumables and common laboratory procedures and provided mitigation strategies based on these. Additional recommendations include the appropriate design of experimental controls to quantify levels of introduced contamination based on methods and the detection techniques utilised. The application of these mitigation strategies and appropriate experimental design will allow for more accurate estimations on the level of microplastic and nanoplastic contamination within environmental samples.

Micro- and nano-plastics in the atmosphere: A review of occurrence, properties and human health risks

The ubiquitous occurrence of micro/nano plastics (MNPs) poses potential threats to ecosystem and human health that have attracted broad concerns in recent decades. Detection of MNPs in several remote regions has implicated atmospheric transport as an important pathway for global dissemination of MNPs and hence as a global health risk. In this review, the latest research progress on (1) sampling and detection; (2) origin and characteristics; and (3) transport and fate of atmospheric MNPs was summarized. Further, the current status of exposure risks and toxicological effects from inhaled atmospheric MNPs on human health is examined. Due to limitations in sampling and identification methodologies, the study of atmospheric nanoplastics is very limited today. The large spatial variation of atmospheric MNP concentrations reported worldwide makes it difficult to compare the overall indoor and outdoor exposure risks. Several in vitro, in vivo, and epidemiological studies demonstrate adverse effects of immune response, apoptosis and oxidative stress caused by MNP inhalation that may induce cardiovascular diseases and reproductive and developmental abnormalities. Given the emerging importance of atmospheric MNPs, the establishment of standardized sampling-pretreatment-detection protocols and comprehensive toxicological studies are critical to advance environmental and health risk assessments of atmospheric MNPs.

Exposure of U.S. adults to microplastics from commonly-consumed proteins

We investigated microplastic (MP) contamination in 16 commonly-consumed protein products (seafoods, terrestrial meats, and plant-based proteins) purchased in the United States (U.S.) with different levels of processing (unprocessed, minimally-processed, and highly-processed), brands (1 - 4 per product type, depending on availability) and store types (conventional supermarket and grocer featuring mostly natural/organic products). Mean (±stdev) MP contamination per serving among the products was 74 ± 220 particles (ranging from 2 ± 2 particles in chicken breast to 370 ± 580 in breaded shrimp). Concentrations (MPs/g tissue) differed between processing levels, with highly-processed products containing significantly more MPs than minimally-processed products (p = 0.0049). There were no significant differences among the same product from different brands or store types. Integrating these results with protein consumption data from the American public, we estimate that the mean annual exposure of adults to MPs in these proteins is 11,000 ± 29,000 particles, with a maximum estimated exposure of 3.8 million MPs/year. These findings further inform estimations of human exposure to MPs, particularly from proteins which are important dietary staples in the U.S. Subsequent research should investigate additional drivers of MPs in the human diet, including other understudied food groups sourced from both within and outside the U.S.

Comprehensive assessment of microplastics in Australian biosolids: Abundance, seasonal variation and potential transport to agroecosystems

Striving towards a circular economy, the application of treated sewage sludge (biosolids) to land is an opportunity to improve the condition of the soil and add essential nutrients, in turn reducing the need for fertilisers. However, there is an increasing concern about microplastic (MP) contamination of biosolids and their transport to terrestrial ecosystems. In Australia, agriculture is the largest biosolids end-user, however, there is limited understanding of MPs in Australian biosolids. Also, while the method to isolate MPs from biosolid is established, a need to extract and analyse MPs more efficiently is still pressing. In this study, we comprehensively quantified and characterised MPs in 146 biosolids samples collected from thirteen wastewater treatment plants (WWTPs) including different seasons. We have optimised an oxidative-enzymatic purification method to overcome current limitations for MP identification in complex samples and accurately report MPs in biosolids. This method enabled removal of >93 % of dry weight of organic material and greatly facilitated the MPs instrumental analysis. The concentration of MPs (>20 µm) in all biosolids samples ranged from 11 to 150 MPs/g dry weight. Abundance of MPs was affected by seasons with higher abundance of MPs usually found during cold and wet seasons. Despite seasonal variations, polyethylene terephthalate, polyurethane and polymethyl methacrylate were the most abundant polymers. Smaller MPs (20 to 200 µm) comprised >70 % of all detected MPs with a clear negative linear relationship observed between MP size and abundance. Per capita concentration of MPs in biosolids across all studied WWTPs was 0.7 to 21 g MPs per person per year. Therefore, biosolids are an important sink and source of MPs to agroecosystems, emphasising the need to more comprehensively understand the fate, impact and risks associated with MPs on agricultural soils.

Impact of a nanofiltration system on microplastic contamination in Geneva groundwater (Switzerland)

Microplastics (MPs) have been observed in the oceans, fresh waters, karstic water and remote water bodies. However, little is known on groundwater contamination, which is a natural resource of utmost importance for millions of people and is often perceived as a reliable source of water. Moreover, nanofiltration is perceived as a reliable technology to remove contaminants from water. In this study, large sample volumes of a silty-sandy gravel aquifer and the corresponding nanofiltered water were analysed for the presence of MPs (> 20 µm) using Fourier transform infrared (FTIR) microscopy. Concentration in ground water was 8 ± 7 MPs/m3 and increased to 36 ± 11 MPs/m3 in nanofiltered water. All MPs had a maximum Ferret diameter lower than 500 µm. Size distribution of MPs was towards the small size class (20-50 µm). In groundwater, 33% of MPs were detected in the smallest size class (20-50 µm) and 67% in the 50-100-µm-size class. In comparison, around 52% of MPs in nanofiltered water were observed in the 20-50 µm size class. Moreover, 33% of the MPs observed in nanofiltered water were in the 50-100 µm size class and 15% in the 100-500-µm-size class. From a chemical point of view, different plastic polymers were identified in groundwater and in nanofiltered water, such as polypropylene (PP), polyvinyl chloride (PVC), ethylene (vinyl acetate) copolymer (EVA), polyethylene (PE), polyethylene terephthalate (PET), polymethyl methacrylate (PMMA) and other polymer materials (such as polystyrene-based copolymers, vinyl-based copolymers). Fibres were observed in all samples, but only a small number of fibres (near 1%) were identified as PP synthetic fibres in nanofiltered water. Furthermore, no clear difference of fibre concentrations was observed between groundwater (232 ± 127 fibres/m3) and nanofiltered water (247 ± 118 fibres/m3). Groundwater had extremely low levels of microplastics, and although the nanofiltration effectively removes suspended particulate matter, it slightly contaminates the filtered water with MPs.

Urban tropical freshwater ponds as microplastics hotspots-insight on abundance and characteristics using an improved sampling technique

This study elucidates the distribution and characteristics of microplastics (MPs) in 20 tropical freshwater ponds, located in the urban settlement of Raipur city in state of Chhattisgarh, India. The ponds were divided into 4 groups based on the habitat types to understand the influence of land use patterns and human activity on the distribution of MPs. Here, we provide an improved sampling technique that is economical, traditional, indigenous, independent of vessels or structures, and replicable for smaller waterbodies. The efficiency of the proposed method is closer to the traditional boat-based net sampling technique. MPs are ubiquitous in surface water samples of all 20 ponds. The average abundance of MPs was 2.52 ± 1.28 particles/L for bucket samples and 2.93 ± 1.34 particles/L for net samples. Among extracted MPs, fragments, films, and foams were dominant. MPs within size class 1 mm to 500 μm were prevailing for both bucket samples and tube-net samples. Color-wise, white/transparent and black MPs were abundant in both types of samples while the majority of MPs were polyethylene and polystyrene. The tube-net sampling method is economical and replicable and provides comparable results. This can help study MPs distribution in smaller inland waterbodies where boats and structures are not readily available to conduct net sampling. We provide the first insight into the distribution of MPs in urban ponds, and the results can be used to determine the ubiquity of MPs in urban ponds located in different regions of the subcontinent.

Methodology optimization to quantify microplastic presence in planktonic copepods, chaetognaths and fish larvae

Two of the groups most impacted by microplastics (MPs) are zooplankton and fish larvae, either through MPs ingestion or absorption. Although there has been an increase of studies focusing on MPs ingestion by these organisms, there is still no standardized methodology for the quantification of MPs present in plankton. For example, some reagents normally used to digest plankton and recover MPs appear adversely to affect some plastic characteristics. This can potentially lead to underestimating the amount and types of MPs present in the organisms analyzed. Hence, this work aimed to optimize a methodology to quantify MPs present in plankton, namely zooplankton and fish larvae, and ensuring MPs integrity. Hence, the planktonic organism tissues were digested using 30% (v/v) H2O2 solution at different temperatures and incubation periods while preserving the integrity and polymer characteristics of 13 types of MPs. MPs' characteristics were register before and after the tests, by visual inspection and Fourier Transform Infrared Spectroscopy (FTIR) analysis, to evaluate the integrity and features of MPs. With this methodology, MPs recovery was above 85% for all types of plastic tested. The proposed methodology is a rapid protocol, with a maximum of 7 h of incubation, that ensures simultaneously the full digestion of the organism tissues and the complete preservation of all the plastic characteristics, namely color, size and polymer type.•A methodology was optimized to quantify microplastics present in zooplankton (copepods, chaetognaths and fish larvae).•Thirteen types of microplastics (fibers and fragments of different polymers) were used to test the efficiency of the methodology ensuring the maintenance of the integrity of plastics.•With this methodology, microplastic recovery was above 85% for all the types of microplastic tested and no changes in their characteristics were observed.

Influence of tourism on microplastic contamination at wastewater treatment plants in the coastal municipality of Chiclana de la Frontera

The tourism is one of the most important sources of the economy in the Bay of Cadiz. Specifically, the municipality of Chiclana de la Frontera, with a population lower than 90,000 citizens, located in the southeast of Spain. During the summer season the population duplicates leading to an increment in flow at wastewater treatment plants (WWTPs). These facilities have been reported as a source of microplastics (MPs) into marine ecosystems, therefore the aim of the present study is to investigate if the tourism affects the presence, discharge and in the receiving environment. Samples were taken at the influent and effluent of the municipal WWTPs (one located at the urban area and other located at resort area) during 2021 (including low and high season). MPs were collected and extracted from wastewater matrixes following the method recommended by the National Oceanic and Atmospheric Administration and UTS treatment to reduce organic matter and cellulose, respectively. The analysis of the samples was performed according to their abundance, shape, size, and type of polymer, along with the removal rates of MPs at WWTPs. The results showed heterogeneous MPs abundance ranging from 1246.4 to 345.7 MPs/L and 72.9 to 4.2, in the influent and effluent, respectively, increasing the presence of MPs at resort WWTP during high season. Fibers were the predominant shape within all the samples. A total of 17 polymers were identified, by ATR-FTIR, where Acrylates, PE and PA were the largest polymers found. Despite the high MPs retention performance of the WWTPs analyzed (84.1-99.3 %), a combined contribution of approximately 1.4 × 107-5.9 × 108 MPs/d to the aquatic environment was estimated. Finally, these results indicate that the increase of MPs in the wastewater at WWTP-B was related with the population increase as a consequence of summer tourism.

A standard analytical approach and establishing criteria for microplastic concentrations in wastewater, drinking water and tap water

The ubiquitous presence of microplastics (MPs) in natural water bodies reflects the global issue regarding these micropollutants. The main problem of MPs lies on the difficulty of removing these particles from water during wastewater and drinking water treatments. The release of MPs to the environment in treated wastewater contributed to the dispersion of these micropollutants, which enhances the harmful effect of MPs on fauna and flora. In addition, their presence in tap water entails a potential risk to human health since MPs can be directly consumed. The first step is being able to quantify and characterise these microparticles accurately. In this work, a comprehensive analysis on the presence of MPs in wastewater, drinking water and tap water has been conducted with emphasis on sampling methods, pre-treatment, MP size and analytical methods. Based on literature data, a standard experimental procedure has been proposed with the objective of recommending a methodology that allows the homogenisation of MP analysis in water samples. Finally, reported MP concentrations for influents and effluents of drinking and wastewater treatment plants and tap water have been analysed, in terms of abundance, ranges and average values, and a tentative classification of different waters based on their MP concentrations is proposed.

Analytical challenges in detecting microplastics and nanoplastics in soil-plant systems

Microplastics (MPx) and nanoplastics (NPx) are increasingly accumulating in terrestrial ecosystems, heightening concerns about their potential adverse effects on human health via the food chain. Techniques aimed at recovering the most challenging colloidal fractions of MPx and NPx, especially for analytical purposes, are limited. This systematic review emphasises the absence of a universal, efficient, and cost-effective analytical method as the primary hindrance to studying MPx and NPx in soil and plant samples. The study reveals that several methods, including density separation, organic matter removal, and filtration, are utilized to detect MPx or NPx in soil through vibrational spectroscopy and visual identification. Instruments such as Pyrolysis Gas Chromatography Mass Spectrometry (Py-GCMS), Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR) Spectroscopy, and fluorescence microscopy are employed to identify MPx and NPx in plant tissue. In extraction procedures, organic solvents and sonication are used to isolate NPx from plant tissues, while Pyrolysis GC-MS quantifies the plastics. SEM and TEM serve to observe and characterize NPx within plant tissues. Additionally, FTIR and fluorescence microscopy are utilized to identify polymers of MPx and NPx based on their spectral characteristics and fluorescence signals. The findings from this review clarify the identification and quantification methods for MPx and NPx in soil and plant systems and provide a comprehensive methodology for assessing MPx/NPx in the environment.

Revealing microplastic dynamics: the impact of precipitation and depth in urban river ecosystems

Research on microplastics in Latin America is limited compared to a global perspective. Brazil plays a significant role in this context, as it possesses 12% of the world's freshwater reserves, constituting 53% of South America's water resources. There has been growing concern regarding the plastic pollution of the country's freshwater systems in recent years. Therefore, this study investigated the impact of plastic pollution on the Guaíba River, a significant watercourse in the southern region of Brazil that is subjected to high anthropogenic pressure. Additionally, we examined correlations between the presence of microplastics and key factors influencing their distribution in the river. Thus, freshwater was collected in seven sampling campaigns from 2019 to 2020, totaling 66 samples. The microplastics were quantified and characterized according to their color, shape, and polymeric composition. The concentration of microplastics varied between 2.9 and 53.8 items m-3, and the distribution and transport were positively influenced by the population density, precipitations, and depth of each sampling point. White-transparent color category (51%) and fragment shape (89%) were predominant among the found particles. Polyethylene (PE) and polypropylene (PP) represented 37% and 57% of the analyzed particles. The non-metric multidimensional scaling (nMDS) analysis indicated that similar contamination sources, such as domestic sewage, could influence three out of ten sampled points. Several microplastics presented the formation of cracks, with sizes smaller than 10 μm on their surface, which might indicate an erosion process, resulting in the formation of nanoplastics. The color fading observed in microplastics suggests that the particles were subjected to environmental stressors, leading to the leaching or degradation of the dye on the plastic. The results confirmed the ubiquity of microplastics in Guaíba River, highlighting the importance of improving the regulations on plastic waste disposal in the country to prevent the contamination of freshwater bodies.

Microplastics in the maximum chlorophyll layer along a north-south transect in the Mediterranean Sea in comparison with zooplankton concentrations

The aim of this study was to characterize and quantify microplastics (MPs) at the chlorophyll maximum layer (CML), around 30 to 60 m depth, during a cruise dedicated to the study of contaminants in plankton, the MERITE-HIPPOCAMPE project, along a north-south transect in the western Mediterranean Sea (Tedetti et al., 2023). Plankton were collected by horizontal net tows in this layer using a multinet Hydrobios Midi equipped with 60 μm mesh-size nets. The collected plankton were fractionated through a sieve column for various later contaminant measurements and for zooplankton analysis (Fierro-González et al., 2023). For all stations, samples were also fully examined for microplastics (MPs) for fractions >300 μm. MPs were found at all stations in the CML layer (mean: 42.9 ± 45.4 MPs m-3), of which 96 ± 4 % were fibers. The ratios of mesozooplankton/MPs and detritus/MPs in this CML were respectively 223 ± 315 and 2544 ± 2268. These data are analyzed together with MPs concentrations from sea- surface sampled with a 300 μm net-size Manta net at the same stations. Overall, our observations highlight the very high density of fibers at the CML, mainly associated with aggregates, raising the hypothesis of their interactions with marine snow. Therefore, the importance of marine snow and vertical layering will have to be considered in future MP distribution modelling efforts.

Atmospheric Microplastics: Perspectives on Origin, Abundances, Ecological and Health Risks

Microplastic (MP) pollution has aroused a tremendous amount of public and scientific interest worldwide. MPs are found widely ranging from terrestrial to aquatic ecosystems primarily due to the over-exploitation of plastic products and unscientific disposal of plastic waste. There is a large availability of scientific literature on MP pollution in the terrestrial and aquatic ecosystems, especially the marine environments; however, only recently has greater scientific attention been focused on the presence of MPs in the air and its retrospective health implications. Besides, atmospheric transport has been reported to be an important pathway of transport of MPs to the pristine regions of the world. From a health perspective, existing studies suggest that airborne MPs are priority pollutant vectors, that may penetrate deep into the body through inhalation leading to adverse health impacts such as neurotoxicity, cancer, respiratory problems, cytotoxicity, and many more. However, their effects on indoor and outdoor air quality, and on human health are not yet clearly understood due to the lack of enough research studies on that and the non-availability of established scientific protocols for their characterization. This scientific review entails important information concerning the abundance of atmospheric MPs worldwide within the existing literature. A thorough comparison of existing sampling and analytical protocols has been presented. Besides, this review has unveiled the areas of scientific concern especially air quality monitoring which requires immediate attention, with the information gaps to be filled have been addressed.

Microplastics in water from the confluence of tropical rivers: Overall review and a case study in Paraiba do Sul River basin

Rivers are known for carrying out a fundamental role in the transportation of human debris from continental areas to the marine environment and have been identified as hotspots for plastic pollution. We characterized microplastics (MPs) along confluence areas in the Paraíba do Sul River basin, the biggest river in southeastern Brazil. This water body crosses highly industrialized areas, with the highest population density, and the major water demand in South America. Considering the important ecological function of this extensive watershed and the implications of MP pollution, we evaluate the spatial variation of MP concentration in the confluence areas and upstream from the confluence. Samples were taken from the superficial layer of the water column in February and June 2022, using manta net with 300 μm mesh size. A total of 19 categories and 2870 plastic particles were determined. The confluences areas of rivers showed the highest concentration of MPs, highlighting the confluences of the Paraiba do Sul and Muriaé rivers (0.71 ± 0.25 MP/m3), followed by Paraíba do Sul and Dois Rios rivers (0.42 ± 0.23 MP/m3) and Paraíba do Sul and Pomba rivers (0.38 ± 0.14 MP/m3). Black fibers were the main category, followed by blue fibers and blue fragments. The MPs in the surface waters of Paraíba do Sul River is significantly influenced by the sampling points spatiality. This result corroborates other studies around the world and reinforces the argument that affluents are important sources for the introduction of MPs in larger rivers. Nevertheless, our results provide a better understanding of the different contributing factors and occurrence of MPs in river basins.

Ecological traits do not predict the uptake of microplastics by fishes in a Neotropical River

Pollution by synthetic polymers is even more problematic to the environment when this material is fragmented into small portions, forming microplastics (MPs). We analyzed the contamination of ichthyofauna by MPs in an important river of the Atlantic Rainforest in regard to abundance, diversity of morphotypes, polymers, colors, and sizes of the synthetic particles in 20 species of fish. Fish were collected in November 2019 and in March 2020 in five sites along the Pomba River. Of the 101 fish analyzed, 49 (49%) presented MPs in at least one organ. Of the 20 species of fish collected 13 included individuals with at least one MP in their analyzed organs. The organs, trophic categories and feeding areas did not affect the general abundance of MPs types. Blue MPs were predominant, followed by the colors black, red, and white. MP fibers represented 91% of total MPs. Most MPs were between 2 and 3 mm in size. Polyethylene terephthalate (PET), polypropylene (PP), polyamide (PA), polyvinylidene chloride "Nylon" (PVDC), and high-density polyethylene (HDPE) were detected in the fishes. The exposure of the fish species to MPs was associated mainly with individual size and species-specific aspects, regardless of ecological traits. Considering that 55% of the fish species studied are consumed by humans, it is necessary to study the potential impact of MP ingestion on human health and to understand to what extent we may be consuming both plastic particles and contaminants that are adsorbed to MPs.

The influence of complex matrices on method performance in extracting and monitoring for microplastics

Previous studies have evaluated method performance for quantifying and characterizing microplastics in clean water, but little is known about the efficacy of procedures used to extract microplastics from complex matrices. Here we provided 15 laboratories with samples representing four matrices (i.e., drinking water, fish tissue, sediment, and surface water) each spiked with a known number of microplastic particles spanning a variety of polymers, morphologies, colors, and sizes. Percent recovery (i.e., accuracy) in complex matrices was particle size dependent, with ∼60-70% recovery for particles >212 μm, but as little as 2% recovery for particles <20 μm. Extraction from sediment was most problematic, with recoveries reduced by at least one-third relative to drinking water. Though accuracy was low, the extraction procedures had no observed effect on precision or chemical identification using spectroscopy. Extraction procedures greatly increased sample processing times for all matrices with the extraction of sediment, tissue, and surface water taking approximately 16, 9, and 4 times longer than drinking water, respectively. Overall, our findings indicate that increasing accuracy and reducing sample processing times present the greatest opportunities for method improvement rather than particle identification and characterization.

Abundance and characteristics of microplastics in a freshwater river in northwestern Himalayas, India - Scenario of riverbank solid waste disposal sites

Microplastics (MPs) are one of the challenging and established contaminants that have adverse implications on human health. The focus of this study was to quantify and analyze the contribution of unscientific municipal solid waste (MSW) disposal sites to the MPs in the Jhelum River and the risk associated with it. Quantitative analysis of our study showed a mean MP concentration of 1474 ± 1026 particles/m3 for the entire stretch of the river. All the sites confirmed the presence of MPs with the concentration ranging from 600 particles/m3 to 2500 particles/m3. The size distribution of MPs suggested that 34 % of the microplastics ranged between 300 μm to 75 μm while 66 % of the particles varied between 300 μm to 5 mm. The concentrations of MPs downstream of unscientific disposal sites were found to increase threefold to that of upstream. The Fourier Transform Infrared Spectroscopy (FT-IR) confirmed the presence of polyethylene (PE) in the majority followed by polyvinyl chloride (PVC) and polypropylene (PP). The flakes were dominant throughout the river followed by filaments, fragments, and spherules. Count based Pollution level indexing (PLI) estimated 3-14 times MP contamination in the river with respect to contamination in glacial runoffs. The risk assessment study of the MPs indicated an increase of around 10.2 % in ingestion rates of MPs due to the unscientific disposal of MSW on the banks of the freshwater body. The values of polymer hazard index (PHI) and potential ecological risk index (PERI) were in the extreme case of pollution (PHI>1000 and PERI>1200). This study manifests the adversities of unscientific municipal solid waste disposal for timely waste management.

M. M. Ferraz M. Microplastics analytics: why we should not underestimate the importance of blank controls

Recent years have seen considerable scientific attention devoted towards documenting the presence of microplastics (MPs) in environmental samples. Due to omnipresence of environmental microplastics, however, disentangling environmental MPs from sample contamination is a challenge. Hence, the environmental (collection site and laboratory) microplastics contamination of samples during processing is a reality that we must address, in order to generate reproducible and reliable data. Here we investigated published literature and have found that around 1/5 of studies failed to use blank controls in their experiments. Additionally, only 34% of the studies used a controlled air environment for their sample processing (laminar flow, fume hood, closed laboratory, clean room, etc.). In that regard, we have also shown that preparing samples in the fume hood, leads to more microplastics > 1 μm) contamination than preparing it in the laboratory bench and the laminar flow. Although it did not completely prevent microplastics contamination, the processing of sample inside the laminar flow is the best option to reduce sample contamination during processing. Overall, we showed that blank controls are a must in microplastics sample preparation, but it is often overlooked by researchers.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s43591-023-00065-3.

Seasonal variation in plastic litter pollution in mangroves from two remote tropical estuaries of the Colombian Pacific

Mangroves in estuaries are highly vulnerable to the impacts of plastic litter pollution, because their location at river mouths and the high capacity of mangrove trees to trap plastic items. Here, we present new results on the abundance and characteristics of plastic litter during high and low rainfall seasons in mangrove waters and sediments of the Saija and Timbiqui River estuaries in the Colombian Pacific. In both estuaries, microplastics were the most common size (50-100 %), followed by mesoplastics (13-42 %) and macroplastics (0-8 %). Total abundances of plastic litter were higher during the high rainfall season (0.17-0.53 items/m-3 in surface waters and 764-832 items/m-2 in sediments), with a moderately positive relationship between plastic abundances recorded in both environmental matrices. The most common microplastics were foams and fragments. Continuous research and monitoring are required for a better understanding and management of these ecosystems and their threats.

A Complete Guide to Extraction Methods of Microplastics from Complex Environmental Matrices

Sustainable development is a big global challenge for the 21st century. In recent years, a class of emerging contaminants known as microplastics (MPs) has been identified as a significant pollutant with the potential to harm ecosystems. These small plastic particles have been found in every compartment of the planet, with aquatic habitats serving as the ultimate sink. The challenge to extract MPs from different environmental matrices is a tangible and imperative issue. One of the primary specialties of research in environmental chemistry is the development of simple, rapid, low-cost, sensitive, and selective analytical methods for the extraction and identification of MPs in the environment. The present review describes the developments in MP extraction methods from complex environmental matrices. All existing methodologies (new, old, and proof-of-concept) are discussed and evaluated for their potential usefulness to extract MPs from various biotic and abiotic matrices for the sake of progress and innovation. This study concludes by addressing the current challenges and outlining future research objectives aimed at combating MP pollution. Additionally, a set of recommendations is provided to assist researchers in selecting appropriate analytical techniques for obtaining accurate results. To facilitate this process, a proposed roadmap for MP extraction is presented, considering the specific environmental compartments under investigation. By following this roadmap, researchers can enhance their understanding of MP pollution and contribute to effective mitigation strategies.

Understanding microplastic pollution of marine ecosystem: a review

Microplastics are emerging as prominent pollutants across the globe. Oceans are becoming major sinks for these pollutants, and their presence is widespread in coastal regions, oceanic surface waters, water column, and sediments. Studies have revealed that microplastics cause serious threats to the marine ecosystem as well as human beings. In the past few years, many research efforts have focused on studying different aspects relating to microplastic pollution of the oceans. This review summarizes sources, migration routes, and ill effects of marine microplastic pollution along with various conventional as well as advanced methods for microplastics analysis and control. However, various knowledge gaps in detection and analysis require attention in order to understand the sources and transport of microplastics, which is critical to deploying mitigation strategies at appropriate locations. Advanced removal methods and an integrated approach are necessary, including government policies and stringent regulations to control the release of plastics.

Contamination and removal efficiency of microplastics and synthetic fibres in a conventional drinking water treatment plant in Geneva, Switzerland

Although it is known that freshwater resources are contaminated with microplastics (MPs), still limited information is known about the efficiency of large drinking water treatment plants (DWTP) to remove microplastics. Moreover, reported concentrations of MPs in drinking water variates from some units to thousands of units per litre and the sampling volumes used for MPs analysis are generally heterogeneous and limited. The present study evaluates the removal of MPs and synthetic fibres in the main DWTP of Geneva, Switzerland, by considering large sampling volumes at different time intervals. Furthermore, contrary to other studies, this DWTP does not count with a clarification process before sand filtration and coagulated water is sent directly to sand filtration. In this study a distinction is made between microplastics as fragments, films, pellets, and synthetic fibres. Raw water and effluents of each filtering mass (sand and activated carbon filtration) are analysed for the presence of MPs and synthetic fibres with sizes ≥63 μm using infrared spectroscopy. Concentrations of MPs in raw water range from 25.7 to 55.6 MPs/m³ and in treated water from 0 to 4 MPs/m³, respectively. Results show that 70 % of MPs are retained during sand filtration and total removal is equal to 97 % in treated water after activated carbon filtration. Concentration of identified synthetic fibres is low (average value of 2 synthetic fibres/m³) and constant in all steps of water treatment. Chemical composition of microplastics and synthetic fibres is found more heterogeneous in raw water than after sand filtration and activated carbon filtration, indicating the persistence of some types of plastics (like polyethylene and polyethylene terephthalate) in water treatment processes. Heterogeneities in MP concentrations are observed from one sampling campaign to another, indicating significant variations of MP concentrations in raw water.

The relationship between microplastics in eastern oysters (Crassostrea virginica) and surrounding environmental compartments in Long Island Sound

Microplastics (MP, <5 mm) are found in coastal waters across various environmental compartments (biota, water, marine snow, sediment). The eastern oyster (Crassostrea virginica) is a commercially important species that ingests MP; however, oysters are discriminant suspension feeders that do not consume all particles to which they are exposed. This study explored the relationship between MP in oysters on a recreational oyster bed and the surrounding environmental compartments in Long Island Sound (LIS; USA). The quantity and types of MP in oysters, water, marine snow, and sediment samples were determined. Precautions were taken to minimize and monitor MP contamination in the field and laboratory to improve the quality of data collected. Microplastics were isolated from samples via chemical digestion, and any suspected particles were identified using micro-Fourier transform infrared spectroscopy. A total of 86 MP were identified out of 885 suspected particles across environmental media. The highest MP count in an individual oyster was nine, indicating low concentrations of MP in oysters and the surrounding environment. Few polymers, except polyethylene terephthalate, were shared between oysters and the surrounding environmental compartments. Sediments contained the highest number of MP across all environmental compartments (42 total). These data aid in determining the types of MP (polymer composition, shape, size) to which oysters are exposed and identified those ingested. The low numbers of MP recorded, coupled with the lack of alignment of polymers between oysters and their surrounding environment, demonstrates further that oysters are a poor bioindicator species for MP pollution.

How to establish detection limits for environmental microplastics analysis

Establishing analytical detection limits is crucial. Common methods to do so are suitable only for variables with continuous distributions. Because count data for microplastic particles is a discrete variable following the Poisson distribution, currently-used approaches for estimating the detection limit in microplastics analysis are inadequate. Here we evaluate detection limits with techniques for low-level discrete observations to develop proper approaches for estimating the minimum detectable amount (MDA) in microplastic particle analysis, using blank sample data from an interlaboratory calibration exercise for clean water (representing drinking water), dirty water (ambient water), sediment (porous media) and fish tissue (biotic tissues). Two MDAs are applicable: MDA_A to evaluate analytical methods, estimated with replicate blank data; and MDA_B for individual sample batches, calculated with a single blank count. For illustrative purposes, this dataset's overall MDA_A values were 164 counts (clean water), 88 (dirty water), 192 (sediment), and 379 (tissue). MDA values should be reported on a laboratory-specific basis and for individual size fractions, as this provides more useful information about capabilities of individual laboratories. This is due to wide variation in blank levels, as noted by MDA_B values (i.e., among different laboratories) from 14 to 158 (clean water), 9 to 86 (dirty water, 9 to 186 (sediment), and 9 to 247 (tissue). MDA values for fibers were considerably greater than for non-fibers, suggesting that separate MDA values should be reported. This study provides a guideline for estimation and application of microplastics MDA for more robust data to support research activities and environmental management decisions.

Micro- and nanoplastics transfer from seawater to the atmosphere through aerosolization under controlled laboratory conditions

Sea spray has been suggested to enable the transfer of micro- and nanoplastics (MNPs) from the ocean to the atmosphere, but only a few studies support the role of sea spray aerosols (SSAs) as a source of airborne particles. We demonstrated that MNPs are aerosolized during wave action, via SSAs, under controlled laboratory conditions. We used a mini-Marine-Aerosol-Reference-Tank (miniMART), a device that mimics naturally occurring physical mechanisms producing SSAs, and assessed the aerosolization of fluorescent polystyrene beads (0.5-10 μm), in artificial seawater. The SSAs contained up to 18,809 particles/mL of aerosols for 0.5 μm beads, with an enrichment factor of 19-fold, and 1977 particles/mL of aerosols for 10 μm beads with a 2-fold enrichment factor. Our study demonstrates that the use of the miniMART is essential to assess MNPs aerosolization in a standardized way, supporting the hypothesis which states that MNPs in the surface of the ocean may be transferred to the atmosphere.

Distribution of microplastics in freshwater systems in an urbanized region: A case study in Flanders (Belgium)

Microplastics (MPs) are an emerging pollutant of concern in all known aquatic ecosystems. However, studies at a regional scale on MP pollution in freshwater systems and the necessary risk assessments are limited. Therefore, in this study, we examined microplastic concentrations, size distributions, and polymer types in surface waters and sediments in the geographic region Flanders (Belgium), as a case study for a densely populated region and one of the most developed parts of Europe. Samples have been taken on nine different locations, of which five were repeated in a different weather condition. In total 43 aqueous and nine sediment samples have been collected. The quantity and identity of the microplastics in the samples were determined with μFTIR spectroscopy in the range of 25-1000 μm. The MPs' abundances in surface waters and sediments ranged from 0 to 4.8 MP L^-1 (average = 0.48 MP L^-1) and from 0 to 9558 MP kg^-1 dry weight (average = 2774.57 ± 2317.93 MP kg^-1 DW), respectively. Polystyrene and polypropylene were the most common polymer compositions found. No correlations were observed between microplastic concentrations in the sediment/the surface water samples and the measured environmental variables rainfall, conductivity, pH, dissolved oxygen content, waterway flow rate and width, and surrounding land use. Risk assessment results for the measured surface water concentrations through the risk quotient (RQ) method and the probabilistic risk assessment framework suggest that most of the sampled sites in Flanders posed negligible risks to freshwater biota, while this was not the case for some of the sediment concentrations. Our results illustrate the need to urgently develop analytical methods that can routinely measure the full size range of MP in environmental samples to adequately assess risks for the environment.

Patterns of microparticles in blank samples: A study to inform best practices for microplastic analysis

Quality assurance and quality control (QA/QC) techniques are critical to analytical chemistry, and thus the analysis of microplastics. Procedural blanks are a key component of QA/QC for quantifying and characterizing background contamination. Although procedural blanks are becoming increasingly common in microplastics research, how researchers acquire a blank and report and/or use blank contamination data varies. Here, we use the results of laboratory procedural blanks from a method evaluation study to inform QA/QC procedures for microplastics quantification and characterization. Suspected microplastic contamination in the procedural blanks, collected by 12 participating laboratories, had between 7 and 511 particles, with a mean of 80 particles per sample (±SD 134). The most common color and morphology reported were black fibers, and the most common size fraction reported was 20-212 μm. The lack of even smaller particles is likely due to limits of detection versus lack of contamination, as very few labs reported particles <20 μm. Participating labs used a range of QA/QC techniques, including air filtration, filtered water, and working in contained/'enclosed' environments. Our analyses showed that these procedures did not significantly affect blank contamination. To inform blank subtraction, several subtraction methods were tested. No clear pattern based on total recovery was observed. Despite our results, we recommend commonly accepted procedures such as thorough training and cleaning procedures, air filtration, filtered water (e.g., MilliQ, deionized or reverse osmosis), non-synthetic clothing policies and 'enclosed' air flow systems (e.g., clean cabinet). We also recommend blank subtracting by a combination of particle characteristics (color, morphology and size fraction), as it likely provides final microplastic particle characteristics that are most representative of the sample. Further work should be done to assess other QA/QC parameters, such as the use of other types of blanks (e.g., field blanks, matrix blanks) and limits of detection and quantification.

Previous successes and untapped potential of pyrolysis-GC/MS for the analysis of plastic pollution

There is growing concern from scientists, policy makers, and the public about the contamination of natural and indoor environments with plastics, particularly micro/nanoplastics. Typically, characterizing microplastics in environmental samples requires extensive sample processing to isolate particles, followed by spectroscopic methodologies to identify particle polymer composition. Spectroscopic techniques are limited in their ability to provide polymer mass or advanced chemical composition (e.g., chemical additive content), which are important for toxicological assessments. To achieve mass fraction quantification and chemical characterization of plastics in environmental samples, many researchers have turned to thermoanalytical spectrometric approaches, particularly pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). Sample preparation for Py-GC/MS may be approached similarly to techniques needed for spectroscopic approaches (e.g., isolate particles on a filter), employ pressurized solvent extraction, or use ultrafiltration techniques to concentrate nanoplastics. Great strides have been made in using calibration curves to quantify plastics in complex matrices. However, the approaches to the pyrolysis thermal program, as well as calibrant and sample preparation, are inconsistent, requiring refinement and harmonization. This review provides a critical synthesis of previous Py-GC/MS work and highlights opportunities for novel and improved Py-GC/MS analysis of plastics in the future.

Innovative reference materials for method validation in microplastic analysis including interlaboratory comparison exercises

Reference materials (RMs) are vital tools in the validation of methods used to detect environmental pollutants. Microplastics, a relatively new environmental pollutant, require a variety of complex approaches to address their presence in environmental samples. Both interlaboratory comparison (ILC) studies and RMs are essential to support the validation of methods used in microplastic analysis. Presented here are results of quality assurance and quality control (QA/QC) performed on two types of candidate microplastic RMs: dissolvable gelatin capsules and soda tablets. These RMs have been used to support numerous international ILC studies in recent years (2019-2022). Dissolvable capsules containing polyethylene terephthalate (PET), polyvinyl chloride (PVC), polyethylene (PE), and polystyrene (PS), in different size fractions from 50 to 1000 µm, were produced for one ILC study, obtaining relative standard deviation (RSD) from 0 to 24%. The larger size fraction allowed for manual addition of particles to the capsules, yielding 0% error and 100% recovery during QA/QC. Dissolvable capsules were replaced by soda tablets in subsequent ILC studies and recovery test exercises because they were found to be a more reliable carrier for microplastic RMs. Batches of soda tablets were produced containing different single and multiple polymer mixtures, i.e., PE, PET, PS, PVC, polypropylene (PP), and polycarbonate (PC), with RSD ranging from 8 to 21%. Lastly, soda tablets consisting of a mixture of PE, PVC, and PS (125-355 µm) were produced and used for recovery testing during pretreatment of environmental samples. These had an RSD of 9%. Results showed that soda tablets and capsules containing microplastics >50 µm could be produced with sufficient precision for internal recovery tests and external ILC studies. Further work is required to optimize this method for smaller microplastics (< 50 µm) because variation was found to be too large during QA/QC. Nevertheless, this approach represents a valuable solution addressing many of the challenges associated with validating microplastic analytical methods.

Microplastics in the riverine environment: Meta-analysis and quality criteria for developing robust field sampling procedures

Current sampling approaches for quantifying microplastics (MP) in the riverine water column and riverbed are unstandardised and fail to document key river properties that impact on the hydrodynamic and transport processes of MP particles, hindering our understanding of MP behaviour in riverine systems. Using ten criteria based on the reportage of the catchment area, river characteristics of sampling sites and approach, we reviewed the sampling procedures employed in 36 field-based river studies that quantify MP presence in the water column and benthic sediment. Our results showed that a limited number of studies conducted reliable sampling procedures in accordance with the proposed quality criteria, with 35 of the 36 studies receiving a score of zero for at least one criterion, indicating the omission of critical information relating to the study's sample size and the physical and hydraulic characteristics of the sampled river. On the other hand, a good number of studies adequately documented the spatial information of the sampling sites, the vertical location of sample collection, and sampling equipment used. An idealised MP sampling approach is presented to ensure that future studies are harmonised and variables underpinning MP transport in rivers are reported. In addition, a meta-analysis on MP particle characteristics from these studies found that concentrations in the riverine water column and benthic sediment are highly variable, varying by five and seven orders of magnitude respectively, and are heavily dependent on the sampling equipment used. Polypropylene (PP), polyethene, (PE), polystyrene (PS), polyethylene terephthalate (PET) and polyvinyl chloride (PVC) were the most frequently reported MP polymers, while irregular-shaped particles, fibres, spheres, and films were the most commonly reported shapes in the river studies. These results highlight the urgent need to standardise sampling procedures and include key contextual information to improve our understanding of MP behaviour and transport in the freshwater environment.

Microplastics in fishes in amazon riverine beaches: Influence of feeding mode and distance to urban settlements

Microplastic (MP) pollution is a global problem and has affected several biological levels even in protected areas. In the present study, MP contamination was investigated in fish associated with sandy beaches in a permanent environmental protection area in the Amazon. In order to achieve this goal, the shape, color, abundance, richness, and chemical composition of MPs in the digestive tract of 29 fish species in 24 beaches of the Machado River, western Brazilian Amazon, were evaluated. Linear mixed models (LMMs) were adjusted to test the effects of local human modification (HMc), distance from urban settlements, distance from the closest affluent, and trophic categories of fish species on microplastic abundance and richness in their digestive tracts. From the 1082 fish analyzed, 332 (30 %) presented MPs in their digestive tracts. A total of 617 MPs was found (1.8 ± 1.6 MPs; 4.5 ± 1.9 MPs/g fish). Omnivorous and insectivorous fish presented more MPs in sandy beaches located closer to urban settlements. However, carnivorous fish presented a higher abundance of MPs in their digestive tracts compared with the other trophic guilds. This is the first study to analyze plastic contamination in fish associated with sandy beaches in the Amazon (Brazil), and it revealed contamination of the ichthyofauna mainly related to the distance from urban settlements. Our results reinforce the need for better management of landscape surrounding protected areas to mitigate MP pollution.

Microplastic Removal from Drinking Water Using Point-of-Use Devices

The occurrence of microplastics in drinking water has drawn increasing attention due to their ubiquity and unresolved implications regarding human health. Despite achieving high reduction efficiencies (70 to >90%) at conventional drinking water treatment plants (DWTPs), microplastics remain. Since human consumption represents a small portion of typical household water use, point-of-use (POU) water treatment devices may provide the additional removal of microplastics (MPs) prior to consumption. The primary objective of this study was to evaluate the performance of commonly used pour-through POU devices, including those that utilize combinations of granular activated carbon (GAC), ion exchange (IX), and microfiltration (MF), with respect to MP removal. Treated drinking water was spiked with polyethylene terephthalate (PET) and polyvinyl chloride (PVC) fragments, along with nylon fibers representing a range of particle sizes (30–1000 µm) at concentrations of 36–64 particles/L. Samples were collected from each POU device following 25, 50, 75, 100 and 125% increases in the manufacturer’s rated treatment capacity, and subsequently analyzed via microscopy to determine their removal efficiency. Two POU devices that incorporate MF technologies exhibited 78–86% and 94–100% removal values for PVC and PET fragments, respectively, whereas one device that only incorporates GAC and IX resulted in a greater number of particles in its effluent when compared to the influent. When comparing the two devices that incorporate membranes, the device with the smaller nominal pore size (0.2 µm vs. ≥1 µm) exhibited the best performance. These findings suggest that POU devices that incorporate physical treatment barriers, including membrane filtration, may be optimal for MP removal (if desired) from drinking water.

Toward a Better Understanding of the Contribution of Wastewater Treatment Plants to Microplastic Pollution in Receiving Waterways

Microplastics (1 µm-5 mm), are ubiquitous in daily-use products and regularly end up in the wastewater. The main part of the wastewater is treated in wastewater treatment plants (WWTPs), which allow for at least partial removal of microplastics. The present study aimed to understand the contribution of domestic wastewater to microplastic pollution in Flanders (Belgium) via two main discharge routes of microplastics: (1) the effluent, and (2) removed fractions. Furthermore the effect of effluent discharge on the microplastic contamination in the waterway was studied in both surface water and sediment samples of upstream and downstream locations of the discharge from three WWTPs. On average, 12.64 ± 20.20 microplastic/L entered a WWTP (10 µm-5 mm). The effluent contained on average 0.41 ± 0.91 microplastic/L, resulting in an average removal efficiency of 97.46% ± 2.33%, which is comparable with various (non-)European countries. Removal efficiencies are both polymer- and size-specific, and data suggest that smaller particles are less efficiently removed from the wastewater, which also causes an increased input of smaller particles to the environment. The sludge is the most efficient treatment process to remove microplastics. Despite the high removal efficiencies, still 1.11 × 10⁷  ± 3.07 × 10⁷ microplastics end up in the nearby waterway daily. Nonetheless, based on the results gathered in the present study, this does not seem to impact the microplastic concentration in the waterway significantly. In summary, the present study offers a holistic approach in the research on the impact of wastewater on microplastic pollution in the ecosystem, integrating different discharge routes and measuring the impact on environmental microplastic pollution. Environ Toxicol Chem 2023;42:642-654. © 2022 SETAC.

Contribution of household dishwashing to microplastic pollution

At household level, clothes washing has been recognised as an emitter of microplastics (MPs) into the environment and it is supposed that dishwashing is also a source of MPs, although little attention has been paid so far. In this work, the emission of MPs released from dishwashing procedures at household level has been studied. The effect of different parameters such as time, temperature and type of detergent has been analysed. In addition, the MP content of tap water has been evaluated in order to determine its contribution to the MPs in dishwasher effluent. Results showed that when the dishwasher was operated empty with a pre-wash programme (15 min and room water temperature), between 207 and 427 MPs were released per load (3 L), whereas this value increased notably with an intensive programme (164 min and water at 70 °C) (1025-1370 MPs per load, 15 L), which highlighted the effect of temperature and time on MP release. Additionally, when a polypropylene lunch box was washed, the number of MPs released increased by 14 ± 3 MPs and 166 ± 12 MPs of total. Finally, the influence of the use of detergent with the dishwasher empty and containing lunch boxes has been studied. With detergent, 35-54% more MPs were released from dishwasher accessories, whereas no additional release took place from lunch boxes. This work shows for the first time the important contribution of domestic dishwashing to MP pollution and the environmental benefits of using more environmentally friendly materials in both dishwashing machine accessories and food utensils.

Presence of microplastics and microparticles in Oregon Black Rockfish sampled near marine reserve areas

Measuring the spatial distribution of microparticles which include synthetic, semi-synthetic, and anthropogenic particles is critical to understanding their potential negative impacts on species. This is particularly important in the context of microplastics, which are a form of microparticle that are prevalent in the marine environment. To facilitate a better understanding of microparticle occurrence, including microplastics, we sampled subadult and young juvenile Black Rockfish (Sebastes melanops) at multiple Oregon coast sites, and their gastrointestinal tracts were analyzed to identify ingested microparticles. Of the subadult rockfish, one or more microparticles were found in the GI tract of 93.1% of the fish and were present in fish from Newport, and near four of five marine reserves. In the juveniles, 92% of the fish had ingested one or more microparticles from the area of Cape Foulweather, a comparison area, and Otter Rock, a marine reserve. The subadults had an average of 7.31 (average background = 5) microparticles detected, while the juveniles had 4.21 (average background = 1.8). In both the subadult and juvenile fish, approximately 12% of the microparticles were identified as synthetic using micro-Fourier Infrared Spectroscopy (micro-FTIR). Fibers were the most prevalent morphology identified, and verified microparticle contamination was a complex mixture of synthetic (∼12% for subadults and juveniles), anthropogenic (∼87% for subadults and 85.5% for juveniles), and natural (e.g., fur) materials (∼0.7% for subadults and ∼2.4% for juveniles). Similarities in exposure types (particle morphology, particle number) across life stages, coupled with statistical differences in exposure levels at several locations for subadult fish, suggest the potential influence of nearshore oceanographic patterns on microparticle distribution. A deeper understanding of the impact microplastics have on an important fishery such as those for S. melanops, will contribute to our ability to accurately assess risk to both wildlife and humans.

Abundance and distribution of microplastics in surface waters of the Kattegat/ Skagerrak (Denmark)

Microplastics (MPs) are ubiquitous pollutants in the ocean, and there is a general concern about their persistence and potential effects on marine ecosystems. We still know little about the smaller size-fraction of marine MPs (MPs <300 μm), which are not collected with standard nets for MPs monitoring (e.g., Manta net). This study aims to determine the concentration, composition, and size distribution of MPs down to 10 μm in the Kattegat/Skagerrak area. Surface water samples were collected at fourteen stations using a plastic-free pump-filter device (UFO sampler) in October 2020. The samples were treated with an enzymatic-oxidative method and analyzed using FPA-μFTIR imaging. MPs concentrations ranged between 11 and 87 MP m^-3, with 88% of the MPs being smaller than 300 μm. The most abundant shape of MPs were fragments (56%), and polyester, polypropylene, and polyethylene were the dominant synthetic polymer types. The concentration of MPs shows a significant positive correlation to the seawater density. Furthermore, there was a tendency towards higher MPs concentrations in the Northern and the Southern parts of the study area. The concentration of MPs collected with the UFO sampler was several orders of magnitude higher than those commonly found in samples collected with the Manta net due to the dominance of MP smaller size fractions. Despite the multiple potential sources of MPs in the study area, the level of MPs pollution in the surface waters was low compared (<100 MP m^-3) to other regions. The concentrations of MPs found in the studied surface waters were six orders of magnitude lower than those causing negative effects on pelagic organisms based on laboratory exposure studies, thus is not expected to cause any impact on the pelagic food web.

What determines accuracy of chemical identification when using microspectroscopy for the analysis of microplastics?

Fourier transform infrared (FTIR) and Raman microspectroscopy are methods applied in microplastics research to determine the chemical identity of microplastics. These techniques enable quantification of microplastic particles across various matrices. Previous work has highlighted the benefits and limitations of each method and found these to be complimentary. Within this work, metadata collected within an interlaboratory method validation study was used to determine which variables most influenced successful chemical identification of un-weathered microplastics in simulated drinking water samples using FTIR and Raman microspectroscopy. No variables tested had a strong correlation with the accuracy of chemical identification (r = ≤0.63). The variables most correlated with accuracy differed between the two methods, and include both physical characteristics of particles (color, morphology, size, polymer type), and instrumental parameters (spectral collection mode, spectral range). Based on these results, we provide technical recommendations to improve capabilities of both methods for measuring microplastics in drinking water and highlight priorities for further research. For FTIR microspectroscopy, recommendations include considering the type of particle in question to inform sample presentation and spectral collection mode for sample analysis. Instrumental parameters should be adjusted for certain particle types when using Raman microspectroscopy. For both instruments, the study highlighted the need for harmonization of spectral reference libraries among research groups, including the use of libraries containing reference materials of both weathered plastic and natural materials that are commonly found in environmental samples.