The mesentery as a laminated vascular bed for hepatocyte transplantation

Reprogramming the spleen into a functioning 'liver' in vivo

OBJECTIVE

Liver regeneration remains one of the biggest clinical challenges. Here, we aim to transform the spleen into a liver-like organ via directly reprogramming the splenic fibroblasts into hepatocytes in vivo.

DESIGN

In the mouse spleen, the number of fibroblasts was through silica particles (SiO₂) stimulation, the expanded fibroblasts were converted to hepatocytes (iHeps) by lentiviral transfection of three key transcriptional factors (Foxa3, Gata4 and Hnf1a), and the iHeps were further expanded with tumour necrosis factor-α (TNF-α) and lentivirus-mediated expression of epidermal growth factor (EGF) and hepatocyte growth factor (HGF).

RESULTS

SiO₂ stimulation tripled the number of activated fibroblasts. Foxa3, Gata4 and Hnf1a converted SiO₂-remodelled spleen fibroblasts into 2×10⁶ functional iHeps in one spleen. TNF-α protein and lentivirus-mediated expression of EGF and HGF further enabled the total hepatocytes to expand to 8×10⁶ per spleen. iHeps possessed hepatic functions-such as glycogen storage, lipid accumulation and drug metabolism-and performed fundamental liver functions to improve the survival rate of mice with 90% hepatectomy.

CONCLUSION

Direct conversion of the spleen into a liver-like organ, without cell or tissue transplantation, establishes fundamental hepatic functions in mice, suggesting its potential value for the treatment of end-stage liver diseases.

Hepatocyte and Islet Cell Cotransplantation on Poly-L-Lactide Matrix for the Treatment of Liver Cirrhosis

The human autologous hepatocyte matrix implant is a promising alternative procedure to counter liver damage. We assessed the outcome of human hepatocytes isolation from cirrhotic liver compared to the clinical and histological scores of disease severity. A total of 11 patients with various clinical scores (CTP and MELD) and histological score (Metavir, fibrosis) of liver cirrhosis were included in the hepatocyte matrix implant clinical phase I study. The liver segment and pancreatic tissue were harvested from each patient, and hepatocytes and cells of islets of Langerhans were isolated. The freshly isolated human hepatocytes were coseeded with the islet cells onto poly(l-lactic acid) (PLLA) scaffolds, cultured, and transplanted back into the patient. Human hepatocytes were isolated from 11 cirrhotic liver specimens with a resulting yield of 1.4 ± 0.5 × 106 cells per gram of the liver specimen and a viability rate of 52 ± 13%. It was found that the yield and viability of the liver cells were not correlated with the clinical and histological scores of the liver cirrhosis. A correlation was found between the hepatocyte yield obtained and the average number of hepatocytes counted in 10 microscopic fields of view. More viable cells were obtained from cirrhotic livers caused by chronic hepatitis B as compared to chronic hepatitis C in the same MELD score range. There was no correlation between the clinical and histological disease severity scores of liver cirrhosis and the outcome of hepatocytes isolation. It seems that the yield could depend on the type of hepatitis underlying the cirrhotic tissue. The study was registered at www.clinicaltrial.gov with the study identifier: NCT01335568.

Intraperitoneal transplantation of bioengineered humanized liver grafts supports failing liver in acute condition

Acute liver failure (ALF) is one of the most devastating fatal conditions which have posed crucial challenges to the clinicians and researchers for identifying permanent cure. Currently liver transplantation has been considered as the only managerial option. However it's wider applicability has been limited owing to non-availability of quality donor organs, cost-intensiveness, surgical hitches, life-long use of immunosuppressive drugs and long-term complications. Since last decades, several liver support systems have been developed for the management of failing liver in acute condition. However, the major limitation has been the lack of natural biological support and long-term survival of the grafts post-transplantation. Repopulation of decellularized xenogeneic organs is one of the emerging technologies for development of humanized neo-organs for demanding regenerative application. However, the earlier reported studies do not fulfil the insistence to provide immunologically tolerable humanized liver grafts for clinical applications. Here we demonstrate an efficient approach to generate transplantable humanized liver grafts which provides long-term support to the failing liver in Acute Liver Failure (ALF) animal models. These bioengineered humanized liver tissue grafts expresses several liver specific transcripts and performed crucial synthetic (albumin production) and detoxification (urea synthesis) functions at comparative level to normal liver. Intraperitoneal transplantation of these humanized liver grafts offered favourable microenvironment to exchange toxic substances across the barrier during ALF condition and provided long-term survival and function of the graft. In summary, the results of present study provide a first proof of concept in pre-clinical ALF animal model for the applicability of these bioengineered humanized livers in the management of failing liver on demand and may be considered as potential bridge to liver transplantation.

Implantable Biohybrid Artificial Organs

Biohybrid artificial organs encompass all devices which substitute for an organ or tissue function and incorporate both synthetic materials and living cells. This review concerns implantable immunoisolation devices in which the tissue is protected from immune rejection by enclosure within a semipermeable membrane. Two critical areas are discussed in detail: (i) Device design and performance as it relates to maintenance of cell viability and function. Attention is focussed on oxygen supply limitation and how it is affected by tissue density and the development of materials that induce neovascularization at the host tissue-membrane interface; and (ii) Protection from immune rejection. Our current knowledge of the mechanisms that may be operative in immune rejection in the presence of a semipermeable membrane barrier is limited. Nonetheless, recent studies shed light on the role played by membrane properties in preventing immune rejection, and many studies demonstrate substantial progress towards clinically useful implantable immunoisolation devices.

Characterization of Long-Term Survival of Syngeneic Hepatocytes in Rat Peritoneum

Hepatocyte transplantation is a potential therapy for both acute and chronic hepatic insufficiency and also for treatment of inborn errors of metabolism affecting the liver. The peritoneum is one site for implantation and has several advantages: cells implanted there can be easily identified and observed, and it has a relatively large capacity. Long-term survival using “pure” hepatocytes in the peritoneum have been disappointing. We hypothesized that cotransplantation of hepatocytes with nonparenchymal cells would help maintain differentiated hepatocyte function. Rat liver cells transplanted intraperitoneally into August rats were sacrificed at 7 days, 1, 3, 6, 9, and 12 months and analyzed for presence, basal proliferation, and functionality of hepatocytes. To demonstrate that ectopic hepatocytes remained susceptible to exogenous growth factors affecting cell proliferation, rats 9 and 12 months after transplantation were stimulated with tri-iodothyronine and KGF. Hepatocytes were identified 7 days to >12 months, by H&E and immunohistochemically, as ectopic islands in the omental fat. Functionality was confirmed by glycogen deposition. Basal proliferation in 7-day rats was 28.0 ± 10/1000 hepatocytes in ectopic islands (cf. 5.70 ± 2.7/1000 in recipient liver). Proliferation in ectopic islands was greater than host liver. Growth factor-stimulated proliferation in ectopic islands induced a 70-fold increase in DNA synthesis. In conclusion, hepatocytes transplanted with nonparenchymal cells survive, proliferate, and function in the peritoneum of normal rats, and respond to exogenous growth stimuli. Their survival and proliferation in the presence of a normal functioning liver has implications for the potential use of the peritoneal site clinically for supplementation of liver function in metabolic disorders.

Allogeneic islet cells implant on poly-l-lactide matrix to reduce hyperglycaemia in streptozotocin-induced diabetic rat

OBJECTIVE

To demonstrate the effects of allogeneic islet cell matrix implants for glycaemic control in rats with induced diabetes.

METHOD

Sprague-Dawley rats were used as allogeneic donors of islet cells. Cells were seeded on three-dimensional proprietary poly-(l-lactide) matrices. Animals were rendered diabetic and a week later a matrix seeded with islet cells (IMI group) or a control matrix (placebo group) was implanted in the small bowel mesentery. Blood glucose levels were measured weekly for 12 weeks. After sacrifice, implant sections were Gomori stained for beta-cells and immuno-stained for insulin 3, 4, 5, and 6 months post implantation.

RESULTS

82% of seeded islet cells attached to the matrices. In the IMI group blood glucose levels were significantly reduced after implantation compared with before implantation across several time points. In the IMI group beta-cells and insulin-positive cells were identified at the implant site.

CONCLUSION

The islet cell matrix implant reduced the blood glucose levels although complete normo-glycaemia was not established. The islet cell matrix implant may serve as an additional option for islet cell transplantation using 3D scaffold platforms for better survival and function of the islet cells.

The Protective Effect of Transplanting Liver Cells Into the Mesentery on the Rescue of Acute Liver Failure After Massive Hepatectomy

Postoperative liver failure is one of the most critical complications following extensive hepatectomy. Although transplantation of allogeneic hepatocytes is an attractive therapy for posthepatectomy liver failure, transplanting cells via the portal veins typically causes portal vein embolization. The embolization by transplanted cells would be lethal in patients who have undergone massive hepatectomy. Thus, transplant surgeons need to select extrahepatic sites as transplant sites to prevent portal vein embolization. We aimed to investigate the mechanism of how liver cells transplanted into the mesentery protect recipient rats from acute liver failure after massive hepatectomy. We induced posthepatectomy liver failure by 90% hepatectomy in rats. Liver cells harvested from rat livers were transplanted into the mesenteries of hepatectomized rats. Twenty percent of the harvested cells, which consisted of hepatocytes and nonparenchymal cells, were transplanted into each recipient. The survival rate improved significantly in the liver cell transplantation group compared to the control group 7 days after hepatectomy (69 vs. 7%). Histological findings of the transplantation site, in vivo imaging system study findings, quantitative polymerase chain reaction assays of the transplanted cells, and serum albumin measurements of transplanted Nagase analbuminemic rats showed rapid deterioration of viable transplanted cells. Although viable transplanted cells deteriorated in the transplanted site, histological findings and an adenosine-5'-triphosphate (ATP) assay showed that the transplanted cells had a protective effect on the remaining livers. These results indicated that the paracrine effects of transplanted liver cells had therapeutic effects. The same protective effects were observed in the hepatocyte transplantation group, but not in the liver nonparenchymal cell transplantation group. Therefore, this effect on the remnant liver was mainly due to the hepatocytes among the transplanted liver cells. We demonstrated that transplanted liver cells protect the remnant liver from severe damage after massive hepatectomy.

Advances in tissue engineering

Nearly 30 years ago, we reported on a concept now known as Tissue Engineering. Here, we report on some of the advances in this now thriving area of research. In particular, significant advances in tissue engineering of skin, liver, spinal cord, blood vessels, and other areas are discussed.

Degradation, Structure and Properties of Fibrous Nonwoven Poly(Glycolic Acid) Scaffolds for Tissue Engineering

Biodegradable polymer scaffolds have been used to engineer new tissues or organs by culturing cells on them. The degradation, structure and properties of fibrous nonwoven poly(glycolic acid) (PGA) scaffolds (2 mm thick and 10 mm in diameter) were studied over 9 weeks in tissue culture medium at 37°C under mixing condition. After 3 days of in vitro culture, the mass of the scaffolds increased slightly (5.6%) due to hydration and/or adsorption, but it decreased thereafter. After 9 weeks, only 12.5% of the mass were retained. The melting point of the scaffolds decreased from 218.1°C to 186.0°C in the first 3 weeks, as measured with differential scanning calorimetry (DSC). No melting peak could be identified for later times (6 weeks and 9 weeks). The crystallinity of the scaffolds doubled over the first 11 days, but decreased thereafter. The glass transition temperature of the degrading scaffolds (36–39°C) was lower than that of the dry starting scaffolds (40°C) presumably due to the plasticizing effect of absorbed water and other low molecular weight molecules. The PGA scaffolds without cells lost their structural integrity and mechanical strength completely in 2 to 3 weeks. In contrast, the neocartilage constructs regenerated from the PGA scaffolds and bovine chondrocytes kept their structural integrity throughout the in vitro culture study. After 12 weeks of in vitro culture, the biomechanical properties of the neocartilage constructs reached the same orders of magnitude as those of normal bovine cartilage.

Development of hepatic tissue engineering

Liver transplantation is still the only treatment for end-staged liver diseases in children. However, donor organ shortage and immunosuppression are major limitations. Thus, approaches of hepatocyte transplantation are under investigation. Using cells might permit mass expansion, cryopreservation, and the ex vivo genetic modification of cells. For the development of cell-transplantation techniques, the use of three-dimensional scaffolds as carrier was shown to be advantageous. Polymeric matrices permit the formation of a neo-tissue and stimulation by the modification of the matrix surface. Another important issue is to define the right cell type for transplantation. Adult hepatocytes have a limited growth and differentiation potential. In contrast, fetal liver cells (FLC) possess an enormous growth and a bipotential differentiation potential. Thus, these cells may be very attractive as a cell resource for developing cell-based liver replacement. A third major issue in this approach is the neo-vascularization. Therefore, the transplantation in a recently developed model using a microsurgically created arterioveno-venous (AV) loop as a central vessel for the neo-tissue was used for transplantation of FLC in a fibrin-matrix. Initial results indicated that the transplantation of FLC using the AV-loop transplantation model may be promising for the development of highly vascularized in vivo tissue-engineered liver support systems.

Hepatic tissue engineering: from transplantation to customized cell-based liver directed therapies from the laboratory

Today, liver transplantation is still the only curative treatment for liver failure due to end-stages liver diseases. Donor organ shortage, high cost and the need of immunosuppressive medications are still the major limitations in the field of liver transplantation. Thus, alternative innovative cell-based liver directed therapies, e.g. liver tissue engineering, are under investigation with the aim, that in future an artificial liver tissue could be created and be used for the replacement of the liver function in patients. Using cells instead of organs in this setting should permit (i) expansion of cells in an in vitro phase, (ii) genetic or immunological manipulation of cells for transplantation, (iii) tissue typing and cryopreservation in a cell bank, and (iv) the ex vivo genetic modification of patient's own cells prior re-implantation. Function and differentiation of liver cells are influenced by the three-dimensional organ architecture. The use of polymeric matrices permits the three dimensional formation of a neo-tissue and specific stimulation by adequate modification of the matrix-surface which might be essential for appropriate differentiation of transplanted cells. Additionally, culturing hepatocytes on three dimensional matrices permits culture in a flow bioreactor system with increased function and survival of the cultured cells. Based on bioreactor technology, bioartificial liver devices (BAL) are developed for extracorporeal liver support. Although BALs improved clinical and metabolic conditions, increased patient survival rates have not been proven yet. For intra-corporeal liver replacement, a concept which combines Tissue Engineering using three-dimensional, highly porous matrices with cell transplantation could be useful. In such a concept, whole liver mass transplantation, long term engraftment and function as well as correction of a metabolic defect in animal models could be achieved with a principally reversible procedure. Future studies have to investigate, which environmental conditions and transplantation system would be most suitable for the development of artificial functional liver tissue including blood supply for a potential use in a clinical setting.

Hepatic tissue engineering: from transplantation to customized cell-based liver directed therapies from the laboratory

Today, liver transplantation is still the only curative treatment for liver failure due to end-stages liver diseases. Donor organ shortage, high cost and the need of immunosuppressive medications are still the major limitations in the field of liver transplantation. Thus, alternative innovative cell-based liver directed therapies, e.g. liver tissue engineering, are under investigation with the aim, that in future an artificial liver tissue could be created and be used for the replacement of the liver function in patients. Using cells instead of organs in this setting should permit (i) expansion of cells in an in vitro phase, (ii) genetic or immunological manipulation of cells for transplantation, (iii) tissue typing and cryopreservation in a cell bank, and (iv) the ex vivo genetic modification of patient's own cells prior re-implantation. Function and differentiation of liver cells are influenced by the three-dimensional organ architecture. The use of polymeric matrices permits the three dimensional formation of a neo-tissue and specific stimulation by adequate modification of the matrix-surface which might be essential for appropriate differentiation of transplanted cells. Additionally, culturing hepatocytes on three dimensional matrices permits culture in a flow bioreactor system with increased function and survival of the cultured cells. Based on bioreactor technology, bioartificial liver devices (BAL) are developed for extracorporeal liver support. Although BALs improved clinical and metabolic conditions, increased patient survival rates have not been proven yet. For intra-corporeal liver replacement, a concept which combines Tissue Engineering using three-dimensional, highly porous matrices with cell transplantation could be useful. In such a concept, whole liver mass transplantation, long term engraftment and function as well as correction of a metabolic defect in animal models could be achieved with a principally reversible procedure. Future studies have to investigate, which environmental conditions and transplantation system would be most suitable for the development of artificial functional liver tissue including blood supply for a potential use in a clinical setting.

Morphological and functional analysis of rat hepatocyte spheroids generated on poly(L-lactic acid) polymer in a pulsatile flow bioreactor

Liver neo-tissue suitable for transplantation has not been established. Primary rat hepatocytes were cultured on three-dimensional biodegradable polymer matrices in a pulsatile flow bioreactor with the intention of inducing tissue formation and improving cell survival. Functional and structural analysis of the hepatocytes forming liver neo-tissue was performed. Biodegradable poly(L-lactic acid) (PLLA) polymer discs were seeded with 4 x 10(6) primary rat hepatocytes each, were exposed to a pulsatile medium flow of 24 mL/min for 1, 2, 4, or 6 days and were investigated for monoethylglycinexylidine (MEGX) formation, ammonia detoxification, Cytokeratin 18 (CK18) expression, and preserved glycogen storage. Fine structural details were obtained using scanning and transmission electron microscopy. Spheroids of viable hepatocytes were formed. MEGX-specific production was maintained and ammonia removal capacity remained high during the entire flow-culture period of 6 days. CK18 distribution was normal. Periodic-acid- Schiff reaction demonstrated homogenous glycogen storage. The hepatocytes reassembled to form intercellular junctions and bile canaliculi. Functional and morphological analysis of rat hepatocytes forming spheroids in a pulsatile flow bioreactor indicated preserved and intact hepatocyte morphology and specific function. Pulsatile flow culture on PLLA scaffolds is a promising new method of hepatic tissue engineering leading to liver neo-tissue formation.

Biomimetic surface modification of poly (L-lactic acid) with gelatin and its effects on articular chondrocytes in vitro

Our objective in this study was to investigate the efficiency of two treatments for poly (L-lactic acid) (PLLA) surface modification with gelatin, via entrapment and coupling, using 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) and N-hydroxysuccinimide (NHS). The properties of original PLLA, gelatin-entrapped, and coupled PLLA films were investigated by water contact angle measurement and electron spectroscopy for chemical analysis (ESCA). The water contact angle indicated that the incorporation of gelatin resulted in a change in hydrophilicity, and the ESCA data suggested that the modified PLLA films became enriched with nitrogen atoms. The cytocompatibility of modified PLLA films might be improved. Therefore, we examined the attachment and proliferation of bovine articular chondrocyte seeded on modified PLLA films and virgin films. A whole-cell enzyme-linked immunosorbent assay (cell ELISA) that detects 5-bromo-2'-deoxyuridine (BrdU) incorporation during DNA synthesis and collagen type II secretion was applied to evaluate the chondrocytes on different PLLA films and tissue culture plates (TCPS). Cell viability was estimated by the MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide] assay, and cell function was assessed by measuring glycosaminoglycan (GAG) secreted by chondrocytes. These results implied that gelatin used to modify the PLLA surface through entrapment and coupling could enhance chondrocyte adhesion, proliferation, and function.

Biomimetic surface modification of poly(L-lactic acid) with chitosan and its effects on articular chondrocytes in vitro

The objective of this study was to investigate the efficiency of two treatments for poly(L-lactic acid) (PLLA) surface modification with chitosan, via entrapment and coupling by using 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide and N-hydroxysuccinimide. The properties of original PLLA films, chitosan-entrapped and coupled PLLA films were investigated by water contact angle measurement and electron spectroscopy for chemical analysis (ESCA). The contact angle indicated the change in hydrophilicity and the ESCA data suggested that the modified PLLA films became enriched with nitrogen atoms. The cytocompatibility of modified PLLA films might be improved. Therefore, the attachment and proliferation of bovine articular chondrocyte seeded on modified PLLA films and control one were examined. A whole cell enzyme-linked immunosorbent assay (Cell ELISA) that detects the BrdU incorporation during DNA synthesis and collagen type II secretion was applied to evaluate the chondrocytes on different PLLA films and tissue culture plates. Cell viability was estimated by the MTT assay and cell function were assessed by measuring sulfated glycosaminoglycan secreted by chondrocytes. These results implied that chitosan used to modify PLLA surface through entrapment and coupling could enhance the chondrocyte adhesion, proliferation and function.

Bone marrow tissue engineering

The creation of mixed hematopoietic chimerism has become an important clinical strategy for tolerance induction for cellular and organ transplantation, and for the treatment of numerous hematopoietic diseases. Clinical success has been limited however, by host immune response and by competition from host hematopoiesis. Recent data suggests that limited donor stem cell engraftment after minimally myeloablative hematopoietic stem cell (HSC) transplantation may in part be due to MHC associated microenvironmental mismatch resulting in a competitive disadvantage for donor HSC. A strategy to overcome this barrier to stable mixed hematopoietic chimerism would involve concurrent transplantation of a donor bone marrow microenvironment. To test this possibility, we set out to develop a method to tissue engineer a bone marrow microenvironment. One to two murine femurs were mechanically crushed to a fine suspension and were combined in vitro with various delivery vehicles. These constructs were transplanted into syngeneic animals in locations that are known to support transplantation of other tissues. Although bone formation was observed with several conditions, bone marrow formation was noted only within the small bowel mesentery when type I collagen was used as the delivery vehicle. No bone marrow formed when the vehicle was changed to polyglycolic acid or type IV collagen. We have demonstrated that the small bowel mesentery can support bone marrow formation under specific in vivo conditions. Future work will focus on strategies for transplantation of an engineered donor bone marrow environment to facilitate creation of allogeneic mixed hematopoietic chimerism.

Behavior of osteoblasts on a type I atelocollagen grafted ozone oxidized poly L-lactic acid membrane

With oxidizing poly-L-lactic acid (PLLA) surface by ozone, peroxide groups are easily generated on the surface. Those peroxides are broken down by redox-coupling reaction, and provide active species that initiate grafting by reaction with the collagen molecules. The surface density of generated peroxide on a PLLA surface was determined by an iodide method. The maximum concentration of peroxide was about 2.87 x 10(-8) mol/cm2 when ozone oxidation was performed at 60 V for 60 min. After the surface oxidation, type I atelocollagen was grafted onto PLLA surface. All physical measurements on the collagen-grafted surface indicated that the PLLA surface was effectively grafted with type I atelocollagen. Behavior of rat calvaria osteoblasts on type I atelocollagen grafted PLLA (PLLA + COL) surface was observed. Initial attachment of osteoblasts on the surface was significantly enhanced, and it is assumed that the atelocollagen matrix supported the initial attachment and growth of cells. Collagenous protein synthesis of osteoblasts was maintained at relatively low level in the early stage of proliferation due to the primarily existing grafted type I atelocollagen, and then increased in 7 days as the osteoblast differentiated. After 7 days, collagenous protein synthesis in osteoblasts was activated. Alkaline phosphatase (ALPase) activity and mineralization by osteoblasts were promoted on PLLA + COL surface. In comparison with PLLA + COL, non-treated PLLA and tissue culture plate (TCPS) did not show any feature expressed in osteoblasts' maturation up to 9 days in this experiment. The grafted type I atelocollagen provided a favorable matrix for cell migration in relation with collagenase expression. Ozone oxidation might be a favorable method for surface modification of PLLA membranes by collagen grafting, and cell behavior could be modulated by the grafted collagen.

Long-term differentiated function of heterotopically transplanted hepatocytes on three-dimensional polymer matrices

Hepatocyte transplantation using porous matrices is under investigation as an alternative therapy for certain liver diseases. For this purpose, long-term function of transplanted hepatocytes is mandatory. This problem has not been sufficiently investigated yet. In this study Lewis rats were used as donors and recipients. Stimulated (group A, portocaval shunt) or unstimulated (group B) hepatocytes were transplanted into prevascularized polyvinyl-alcohol matrices. Cell-free matrices served as controls (group C). Matrices were harvested between 1 h and 1 year after implantation and analyzed by morphometry; albumin RNA in situ hybridization; and cytokeratin-, actin-, desmin-, and macrophage-specific antigen immunohistology. The hepatocyte number significantly decreased within the first week following implantation. Between 1 month and 1 year after transplantation a significant increase in hepatocyte number was noted in groups A and B. Albumin transcripts of transplanted hepatocytes were at normal levels at all times except for group B after 1 year. The immunohistology suggested engraftment of nonparenchymal liver cells. We conclude that 3-dimensional matrices provide a sufficient environment for long-term engraftment of transplanted liver cells. The hepatocytes are able, despite suboptimal initial engraftment, to repopulate the scaffold for at least half of the recipient's life span and maintain cell-specific function after sufficient stimulation.

Is there an optimal concentration of cotransplanted islets of Langerhans for stimulation of hepatocytes in three dimensional matrices?

BACKGROUND

Hepatocyte transplantation using three-dimensional matrices is under investigation as an alternative therapy for several liver diseases. For sufficient transplantation results hepatotrophic stimulation is necessary. We investigated the stimulatory effect of cotransplanted pancreatic islets in different ratios.

METHODS

Lewis rats were used as donors and recipients. A portocaval shunt (group A) or sham operation (groups B-G) was performed 1 week before hepatocyte transplantation. Four polyvinyl-alcohol matrices each containing 1.25 x 10(7) hepatocytes (groups A and B) or 1.25 x 10(7) hepatocytes and 125 (C), 250 (D), 500 (E), or 750 (F) islets were implanted between small bowel mesenteric leaves. In group G, medium soaked matrices were implanted. One month after implantation, specimens were harvested and investigated using albumin-RNA in situ hybridization, and insulin, glucagon, and bromodesoxy uridine immunohistochemistry. The hepatocyte area was assessed using image analysis.

RESULTS

Hepatocyte area and proliferation ratio increased depending on the number of cotransplanted islets with a peak at 40 islets per 1 million hepatocytes (group E). Cotransplantation of islets in higher concentrations did not further increase hepatocyte area or proliferation ratio. Hepatocytes in all groups expressed albumin RNA at normal transcription levels as compared to standard liver sections. Islets displayed insulin and glucagon in physiological distribution.

DISCUSSION

Three-dimensional matrices provide a sufficient environment for transplanted hepatocytes and islets. The hepatotrophic effect of cotransplanted islets is comparable to portocaval shunting and has a saturation limit at 40 islets per 1 million hepatocytes. For further application of islet cotransplantation, this ratio seems to be preferable.

Xenotransplantation of fetal porcine hepatocytes in rats using a tissue engineering approach

Hepatocytes can be successfully transplanted into highly vascular sites such as the spleen, liver, and lungs. Subcutaneous sites lack adequate vascularization to nutritionally support transplanted hepatocytes. We recently reported that matrix-immobilized angiogenic growth factors, e.g., endothelial cell growth factor (ECGF), can induce a high degree of neovascularization. Using this technique, we explored the possibility of transplanting isolated fetal porcine hepatocytes to create liver tissue organoids at a specific subcutaneous site. We evaluated chitosan as a scaffold biomaterial because of its structural similarity to glycosaminoglycans; glycosaminoglycans play a critical role in cell attachment, differentiation, and morphogenesis. Freshly isolated fetal porcine hepatocytes (FPH) (viability greater than 97%) were cultured on modified chitosan scaffolds and transplanted into rat groin fat pads with or without ECGF-induced neovascularization. Cell density and attachment kinetics on chitosan were examined by scanning electron microscopy (SEM) and quantified using a flavianic acid binding assay. Hepatocyte viability and liver organoid formation were examined immunohistochemically. FPH transplanted without prior neovascularization died within 1 day post-transplantation. When transplanted after ECGF-induced neovascularization, FPH thrived for at least 2 weeks and formed liver tissue like structures. Immunohistochemical analysis revealed the presence of hepatocyte-specific cytokeratin staining as well as the presence of alpha-fetoprotein. Light microscopy and SEM revealed that FPH did not change their morphology after attachment to the chitosan surfaces. Thus, chitosan-based biomaterial surfaces have good hepatocyte attachment properties. However, extensive neovascularization is essential for hepatocyte survival and organoid formation. In the future, chitosan-based biomaterials may be useful as scaffolds for creating liver tissue organoids.

Hepatocyte attachment on biodegradable modified chitosan membranes: in vitro evaluation for the development of liver organoids

Extracellular matrix structures including glycosaminoglycans play a critical role in cell attachment, differentiation, and morphogenesis. We evaluated chitosan ([1-->4] linked 2-amino-2-deoxy-beta-D-glucan) as a biomaterial for hepatocyte attachment because of its structural similarity to glycosaminoglycans. Freshly isolated rat and fetal porcine hepatocytes were seeded on chitosan membranes that had been previously blended with collagen, gelatin, or albumin to improve biocompatibility and surface roughness. The optimal cell density and attachment kinetics were quantified. The metabolic activity was investigated by measuring daily urea and total protein secretion by the cells for 2 weeks. While collagen blended-chitosan membranes provided a good attachment surface for rat hepatocytes, albumin and gelatin blended chitosan membranes were superior for fetal porcine hepatocyte attachment. The optimal attachment was maintained with membranes of medium molecular weight (Mr = 750,000 daltons) chitosan, at 3-4 x 10(4) cells/cm2 after 3 h of incubation. In vitro experiments demonstrated that fetal porcine hepatocytes survived at least 14 days when seeded on the chitosan-albumin matrix, demonstrating that this biomaterial can provide suitable cell attachment scaffolds for creating liver tissue organoids.

Host response to tissue engineered devices

The two main components of a tissue engineered device are the transplanted cells and the biomaterial, creating a device for the restoration or modification of tissue or organ function. The implantation of polymer/cell constructs combines concepts of biomaterials and cell transplantation. The interconnections between the host responses to the biomaterial and transplanted cells determines the biocompatibility of the device. This review describes the inflammatory response to the biomaterial component and immune response towards transplanted cells. Emphasis is on how the presence of the transplanted cell construct affects the host response. The inflammatory response towards a biomaterial can impact the immune response towards transplanted cells and vice versa. Immune rejection is the most important host response towards the cellular component of tissue engineered devices containing allogeneic, xenogeneic or immunogenic ex vivo manipulated autologous cells. The immune mechanisms towards allografts and xenografts are outlined to provide a basis for the mechanistic hypotheses of the immune response towards encapsulated cells, with antigen shedding and the indirect pathway of antigen presentation predominating. A review of experimental evidence illustrates examples of the inflammatory response towards biodegradable polymer scaffold materials, examples of devices appropriately integrated as assessed morphologically with the host for various applications including bone, nerve, and skin regeneration, and of the immune response towards encapsulated allogeneic and xenogeneic cells.

Ectopic bone formation by marrow stromal osteoblast transplantation using poly(DL-lactic-co-glycolic acid) foams implanted into the rat mesentery

Porous biodegradable poly(DL-lactic-co-glycolic acid) foams were seeded with rat marrow stromal cells and implanted into the rat mesentery to investigate in vivo bone formation at an ectopic site. Cells were seeded at a density of 6.83 x 10(5) cells/cm2 onto polymer foams having pore sizes ranging from either 150 to 300 to 710 microns and cultured for 7 days in vitro prior to implantation. The polymer/cell constructs were harvested after 1, 7, 28, or 49 days in vivo and processed for histology and gel permeation chromatography. Visual observation of hematoxylin and eosin-stained sections and von Kossa-stained sections revealed the formation of mineralized bonelike tissue in the constructs within 7 days postimplantation. Ingrowth of vascular tissue was also found adjacent to the islands of bone, supplying the necessary metabolic requirements to the newly formed tissue. Mineralization and bone tissue formation were investigated by histomorphometry. The average penetration depth of mineralized tissue in the construct ranged from 190 +/- 50 microns for foams with 500-710-microns pores to 370 +/- 160 microns for foams with 150-300-microns pores after 49 days in vivo. The mineralized bone volume per surface area and total bone volume per surface area had maximal values of 0.28 +/- 0.21 mm (500-710-microns pore size, day 28) and 0.038 +/- 0.024 mm (150-300-microns, day 28), respectively. As much as 11% of the foam volume penetrated by bone tissue was filled with mineralized tissue. No significant trends over time were observed for any of the measured values (penetration depth, bone volume/surface area, or percent mineralized bone volume). These results suggest the feasibility of bone formation by osteoblast transplantation in an orthotopic site where not only bone formation from transplanted cells but also ingrowth from adjacent bone may occur.

Controlled delivery of antigens and adjuvants in vaccine development

Advances in the understanding of the pathogenesis of infectious diseases and cancer immunology have inspired many new approaches to vaccine development. Many subunit antigens and peptides that are effective for vaccination have been discovered. These subunit antigens in tum stimulate synthesis of effective adjuvants to enhance their immunogenicity. Controlled-release technology offers the potential of further improving the efficacy of conventional vaccine formulations by optimizing the temporal and spatial presentation of the-antigens and adjuvants to the immune system. The combination of sustained release and depot effect may also reduce the amount of antigens or adjuvants needed and eliminate the booster shots that are necessary for the success of many vaccinations. This review examines the contribution controlled release technology can make in various areas of vaccination, with an emphasis on tumor vaccines.

Association between capsule diameter, adequacy of encapsulation, and survival of microencapsulated rat islet allografts

As a consequence of its large volume, a microencapsulated islet graft can be implanted only into the peritoneal cavity. The graft volume can be reduced by using small capsules. However, reduction of the diameter of the capsules holds a certain risk, because with smaller capsules, more islets may be found to protrude from the capsules. We have developed a lectin binding assay which, after encapsulation, specifically labels islets or parts of islets that are insufficiently immunoprotected as a consequence of inadequate, and particularly incomplete, encapsulation. With this assay, we found that a reduction of the capsule diameter from 800 micrometers to 500 micrometers was associated with an increase in the percentage of inadequately encapsulated islets from 6.3+/-1.2% to 24.2+/-1.5%. The in vivo significance of this finding was investigated by performing allotransplantations with large diameter (700-800 micrometers) and small diameter (400-500 micrometers) capsules. With large-capsule islet grafts, all recipients (n=5) became normoglycemic for 7-16 weeks, whereas with small-capsule islet grafts, only one of seven recipients became normoglycemic. The in vivo significance of inadequate encapsulation was further substantiated by our finding that most large capsules were floating freely in the peritoneal cavity without any cell adhesion, whereas the vast majority of small capsules was found to be adherent to the surface of intra-abdominal organs and infiltrated by immune cell elements characteristic of both an allograft reaction and a foreign body reaction. We conclude that successful use of capsules with small diameters requires further study to determine which factors in the encapsulation procedure should be modified to reduce the number of inadequate small capsules.

Biomaterials in tissue engineering

Biomaterials play a pivotal role in field of tissue engineering. Biomimetic synthetic polymers have been created to elicit specific cellular functions and to direct cell-cell interactions both in implants that are initially cell-free, which may serve as matrices to conduct tissue regeneration, and in implants to support cell transplantation. Biomimetic approaches have been based on polymers endowed with bioadhesive receptor-binding peptides and mono- and oligosaccharides. These materials have been patterned in two- and three-dimensions to generate model multicellular tissue architectures, and this approach may be useful in future efforts to generate complex organizations of multiple cell types. Natural polymers have also played an important role in these efforts, and recombinant polymers that combine the beneficial aspects of natural polymers with many of the desirable features of synthetic polymers have been designed and produced. Biomaterials have been employed to conduct and accelerate otherwise naturally occurring phenomena, such as tissue regeneration in wound healing in the otherwise healthy subject; to induce cellular responses that might not be normally present, such as healing in a diseased subject or the generation of a new vascular bed to receive a subsequent cell transplant; and to block natural phenomena, such as the immune rejection of cell transplants from other species or the transmission of growth factor signals that stimulate scar formation. This review introduces the biomaterials and describes their application in the engineering of new tissues and the manipulation of tissue responses.