Development an effective system to expression recombinant protein in E. coli via comparison and optimization of signal peptides: Expression of Pseudomonas fluorescens BJ-10 thermostable lipase as case study

Rational design of soluble expressed human aldehyde dehydrogenase 2 with high stability and activity in pepsin and trypsin

Acetaldehyde dehydrogenase 2 (ALDH2) is a crucial enzyme in alcohol metabolism, and oral administration of ALDH2 is a promising method for alcohol detoxification. However, recombinant ALDH2 is susceptible to hydrolysis by digestive enzymes in the gastrointestinal tract and is expressed as inactive inclusion bodies in E. coli. In this study, we performed three rounds of rational design to address these issues. Specifically, the surface digestive sites of pepsin and trypsin were replaced with other polar amino acids, while hydrophobic amino acids were incorporated to reshape the catalytic cavity of ALDH2. The resulting mutant DE2-852 exhibited a 45-fold increase in soluble expression levels, while its stability against trypsin and pepsin increased by eightfold and twofold, respectively. Its catalytic efficiency (kcat/Km) at pH 7.2 and 3.2 improved by more than four and five times, respectively, with increased Vmax and decreased Km values. The enhanced properties of DE2-852 were attributed to the D457Y mutation, which created a more compact protein structure and facilitated a faster collision between the substrate and catalytic residues. These results laid the foundation for the oral administration and mass preparation of highly active ALDH2 and offered insights into the oral application of other proteins.

Comparison of the efficiency of the Sec and Tat secretory pathways in the secretion of recombinant neurturin protein using de novo designed signal peptides

Since cytoplasmic expression of heterologous proteins with disulfide bonds leads to the formation of inclusion bodies in E. coli, periplasmic production is preferable. The N-terminal signal peptide attached to the secreted protein determines the type of secretory pathway through which the target protein is secreted; Sec, Tat, or SRP. The aim of this study was to design and compare two novel signal peptides for the secretion of recombinant neurturin (as a model) via the Sec and Tat pathways. For this purpose, we aligned the natural signal peptides from E. coli and Bacillus subtilis to identify the conserved amino acids and those with the highest repetition. The SignalP4.1 and TatP1.0 software were used to determine the secretion efficiency of the new signal peptides. The efficiency of new signal peptides was then evaluated and compared experimentally with two naturally used signal peptides. Quantitative analysis of Western blot bands showed that approximately 80% of the expressed neurturin was secreted into the periplasmic space by new signal peptides. Circular dichroism spectroscopy also confirmed the correct secondary structure of the secreted neurturin. In conclusion, these novel signal peptides can be used to secrete any other recombinant proteins to the periplasmic space of E. coli efficiently.

Identification and characterisation of a major outer membrane protein from Methylacidiphilum fumariolicum SolV

The outer membrane (OM) protects Gram-negative bacteria against a hostile environment. The proteins embedded in the OM fulfil a number of tasks that are crucial to the bacterial cell. In this study, we identified and characterised a major outer membrane protein (WP_009059494) from Methylacidiphilum fumariolicum SolV. PRED-TMBB and AlphaFold2 predicted this protein to form a porin with a β-barrel structure consisting of ten antiparallel β-sheets and with a small amphipathic N-terminal α-helix in the periplasm. We purified soluble recombinant protein WP_009059494 from E. coli using Tris-HCl buffer with SDS. Antibodies were raised against two peptides in the two large extracellular loops of protein WP_009059494 and immunogold localisation showed this protein to be mainly present in the OM of strain SolV. In addition, this protein is tightly associated with the OM, and is resistant to extraction. Only a small amount can be isolated from the cell envelope using harsh conditions (SDS and boiling). Despite this resistance to extraction, WP_009059494 most likely is an outer membrane protein. A regular lattice could not be detected by negative staining TEM of strain SolV and isolated protein WP_009059494. Considering the specific ecological niche of strain SolV living in a geothermal environment with low pH and high temperatures, this major protein WP_009059494 may act as barrier to resist the extreme conditions found in its natural environment. In addition, we found an absence of the BamB, BamC and BamE proteins of the canonical BAM complex, in Methylacidiphilum and Methylacidimicrobium species. This suggests that these bacteria use a simple BAM complex for folding and transport of OM proteins.

Functional characterization of a lytic polysaccharide monooxygenase from Schizophyllum commune that degrades non-crystalline substrates

Lytic polysaccharide monooxygenases (LPMOs) are mono-copper enzymes that use O2 or H2O2 to oxidatively cleave glycosidic bonds. LPMOs are prevalent in nature, and the functional variation among these enzymes is a topic of great interest. We present the functional characterization of one of the 22 putative AA9-type LPMOs from the fungus Schizophyllum commune, ScLPMO9A. The enzyme, expressed in Escherichia coli, showed C4-oxidative cleavage of amorphous cellulose and soluble cello-oligosaccharides. Activity on xyloglucan, mixed-linkage β-glucan, and glucomannan was also observed, and product profiles differed compared to the well-studied C4-oxidizing NcLPMO9C from Neurospora crassa. While NcLPMO9C is also active on more crystalline forms of cellulose, ScLPMO9A is not. Differences between the two enzymes were also revealed by nuclear magnetic resonance (NMR) titration studies showing that, in contrast to NcLPMO9C, ScLPMO9A has higher affinity for linear substrates compared to branched substrates. Studies of H2O2-fueled degradation of amorphous cellulose showed that ScLPMO9A catalyzes a fast and specific peroxygenase reaction that is at least two orders of magnitude faster than the apparent monooxygenase reaction. Together, these results show that ScLPMO9A is an efficient LPMO with a broad substrate range, which, rather than acting on cellulose, has evolved to act on amorphous and soluble glucans.

Engineered E. coli Nissle 1917 for delivery of bioactive IL-2 for cancer immunotherapy

In this study we performed a step-wise optimization of biologically active IL-2 for delivery using E. coli Nissle 1917. Engineering of the strain was coupled with an in vitro cell assay to measure the biological activity of microbially produced IL-2 (mi-IL2). Next, we assessed the immune modulatory potential of mi-IL2 using a 3D tumor spheroid model demonstrating a strong effect on immune cell activation. Finally, we evaluated the anticancer properties of the engineered strain in a murine CT26 tumor model. The engineered strain was injected intravenously and selectively colonized tumors. The treatment was well-tolerated, and tumors of treated mice showed a modest reduction in tumor growth rate, as well as significantly elevated levels of IL-2 in the tumor. This work demonstrates a workflow for researchers interested in engineering E. coli Nissle for a new class of microbial therapy against cancer.

Factors involved in heterologous expression of proteins in E. coli host

The production of recombinant proteins is one of the most significant achievements of biotechnology in the last century. These proteins are produced in the eukaryotic or prokaryotic heterologous hosts. By increasing the omics data especially related to different heterologous hosts as well as the presence of new amenable genetic engineering tools, we can artificially engineer heterologous hosts to produce recombinant proteins in sufficient quantities. Numerous recombinant proteins have been produced and applied in various industries, and the global recombinant proteins market size is expected to be cast to reach USD 2.4 billion by 2027. Therefore, identifying the weakness and strengths of heterologous hosts is critical to optimize the large-scale biosynthesis of recombinant proteins. E. coli is one of the popular hosts to produce recombinant proteins. Scientists reported some bottlenecks in this host, and due to the increasing demand for the production of recombinant proteins, there is an urgent need to improve this host. In this review, we first provide general information about the E. coli host and compare it with other hosts. In the next step, we describe the factors involved in the expression of the recombinant proteins in E. coli. Successful expression of recombinant proteins in E. coli requires a complete elucidation of these factors. Here, the characteristics of each factor will be fully described, and this information can help to improve the heterologous expression of recombinant proteins in E. coli.

Copper Accumulation Efficiency in Different Recombinant Microorganism Strains Available for Bioremediation of Heavy Metal-Polluted Waters

The aim of this research was to investigate the bioremediation conditions of copper in synthetic water. In the present study, copper ions accumulation efficiency was determined using various genetically modified strains of Saccharomyces cerevisiae (EBY100, INVSc1, BJ5465, and GRF18), Pichia pastoris (X-33, KM71H), Escherichia coli (XL10 Gold, DH5α, and six types of BL21 (DE3)), and Escherichia coli BL21 (DE3) OverExpress expressing two different peroxidases. Viability tests of yeast and bacterial strains showed that bacteria are viable at copper concentrations up to 2.5 mM and yeasts up to 10 mM. Optical emission spectrometry with inductively coupled plasma analysis showed that the tolerance of bacterial strains on media containing 1 mM copper was lower than the tolerance of yeast strains at the same copper concentration. The E. coli BL21 RIL strain had the best copper accumulation efficiency (4.79 mg/L of culture normalized at an optical density of 1.00), which was 1250 times more efficient than the control strain. The yeast strain S. cerevisiae BJ5465 was the most efficient in copper accumulation out of a total of six yeast strains used, accumulating over 400 times more than the negative control strain. In addition, E. coli cells that internally expressed recombinant peroxidase from Thermobifida fusca were able to accumulate 400-fold more copper than cells that produced periplasmic recombinant peroxidases.

Effects of adding poly-histidine tag on stability, antimicrobial activity and safety of recombinant buforin I expressed in periplasmic space of Escherichia coli

The lack of cost-effective methods for producing antimicrobial peptides has made it impossible to use their high potential as a new and powerful class of antimicrobial agents. In recent years, extensive research has been conducted to decrease the cost of recombinant proteins production through microorganisms, transgenic animals, and plants. Well-known genetic and physiological characteristics, short-term proliferation, and ease of manipulation make E. coli expression system a valuable host for recombinant proteins production. Expression in periplasmic space is recommended to reduce the inherently destructive behavior of antimicrobial peptides against the expressing microorganism and to decline susceptibility to proteolytic degradation. In this study, a pET-based expression system was used to express buforin I at E. coli periplasmic space, and its antimicrobial, hemolytic, and cell toxicity activities as well as structural stability were evaluated. The hemolysis activity and cytotoxicity of His-tagged buforin I were negligible and its antimicrobial activity did not show a significant difference compared to synthetic buforin I. In addition, in silico investigating of stability of native and His-tagged buforin I showed that RMSF, RMSD and Rg curves had followed a similar trend during 150 ns simulation. Furthermore, evaluating the modelled structures, FTIR and X-ray methods of both peptides indicated an insignificant structural difference. It was concluded that the recombinant buforin I could be a viable alternative to some currently used antibiotics by successfully expressing it in the pET-based expression system.

Expression, purification, and study on the efficiency of a new potent recombinant scFv antibody against the SARS-CoV-2 spike RBD in E. coli BL21

Many efforts have been made around the world to combat SARS-CoV-2. Among these are recombinant antibodies considered to be suitable as an alternative for some diagnostics/therapeutics. Based on their importance, this study aimed to investigate the expression, purification, and efficiency of a new potent recombinant scFv in the E. coli BL21 (DE3) system. The expression studies were performed after confirming the scFv cloning into the pET28a vector using specific PCRs. After comprehensive expression studies, a suitable strategy was adopted to extract and purify periplasmic proteins using Ni²⁺-NTA resin. Besides the purified scFv, the crude bacterial lysate was also used to develop a sandwich ELISA (S-ELISA) for the detection of SARS-CoV-2. The use of PCR, E. coli expression system, western blotting (WB), and S-ELISA confirmed the functionality of this potent scFv. Moreover, the crude bacterial lysate also showed good potential for detecting SARS-CoV-2. This could be decreasing the costs and ease its utilization for large-scale applications. The production of high-quality recombinant proteins is essential for humankind. Moreover, with attention to the more aggressive nature of SARS-CoV-2 than other coronaviruses, the development of an effective detection method is urgent. Based on our knowledge, this study is one of the limited investigations in two fields: (1) The production of anti-SARS-CoV-2 scFv using E. coli [as a cheap heterologous host] in relatively high amounts and with good stability, and (2) Designing a sensitive S-ELISA for its detection. It may also be utilized as potent therapeutics after further investigations.

Protein Extraction and Purification by Differential Solubilization

The preparation of purified soluble proteins for biochemical studies is essential and the solubility of a protein of interest in various media is central to this process. Selectively altering the solubility of a protein is a rapid and economical step in protein purification and is based on exploiting the inherent physicochemical properties of a polypeptide. Precipitation of proteins, released from cells upon lysis, is often used to concentrate a protein of interest before further purification steps (e.g., ion exchange chromatography, size exclusion chromatography etc).Recombinant proteins may be expressed in host cells as insoluble inclusion bodies due to various influences during overexpression. Such inclusion bodies can often be solubilized to be reconstituted as functional, correctly folded proteins.In this chapter, we examine strategies for extraction/precipitation/solubilization of proteins for protein purification. We also present bioinformatic tools to aid in understanding a protein's propensity to aggregate/solubilize that will be a useful starting point for the development of protein extraction, precipitation, and selective re-solubilization procedures.

Approaches to Avoid Proteolysis During Protein Expression and Purification

All cells contain proteases, which hydrolyze the peptide bonds between amino acids of a protein backbone. Typically, proteases are prevented from nonspecific proteolysis by regulation and by their physical separation into different subcellular compartments; however, this segregation is not retained during cell lysis, which is the initial step in any protein isolation procedure. Prevention of proteolysis during protein purification often takes the form of a two-pronged approach: first, inhibition of proteolysis in situ, followed by the early separation of the protease from the protein of interest via chromatographic purification. Protease inhibitors are routinely used to limit the effect of the proteases before they are physically separated from the protein of interest via column chromatography. In this chapter, commonly used approaches to reducing or avoiding proteolysis during protein expression and purification are reviewed.

Synergistic inhibition of Pseudomonas fluorescens growth and proteases activities via sodium chlorite-based oxyhalogen

Pseudomonas fluorescens is considered among the main spoilage microorganisms due to its ability to produce proteases. Food deterioration caused by spoilage microorganisms has a major impact on food quality and the environment. The inactivation of Pseudomonas fluorescens growth and protease production was intensively investigated with the use of Salmide®, A Sodium Chlorite-Based Oxy-halogen Disinfectant. A unique M9 media was also developed to assure sufficient protease productions with different mutants of Pseudomonas fluorescens as a microbioreactor. Mutations were induced by classical whole-cell mutagenesis using N-methyl-N'- nitro-N-nitrosoguanidine (NTG). A dramatic decrease occurred in protease activity when different Salmide concentrations (5, 10, and 15 ppm) were added to the growth culture followed by a complete inhibition concentration (20, 25, 50, and 100 ppm) of Salmide. However, no significant inhibition occurred once it is secreted out of cells. Some mutants were resistant and remains highly stable with high protease production under stressful conditions of Sodium Chlorite-Based Oxy-halogen. The production of the protease showed a linear correlation with the increase in incubation time using a continuous culture bioreactor system and recorded maximum protease activity after 40 h. Our findings would offer alternative antimicrobial procedures for food and industrial sectors.

Evolutionary adaptation of the protein folding pathway for secretability

Secretory preproteins of the Sec pathway are targeted post-translationally and cross cellular membranes through translocases. During cytoplasmic transit, mature domains remain non-folded for translocase recognition/translocation. After translocation and signal peptide cleavage, mature domains fold to native states in the bacterial periplasm or traffic further. We sought the structural basis for delayed mature domain folding and how signal peptides regulate it. We compared how evolution diversified a periplasmic peptidyl-prolyl isomerase PpiA mature domain from its structural cytoplasmic PpiB twin. Global and local hydrogen-deuterium exchange mass spectrometry showed that PpiA is a slower folder. We defined at near-residue resolution hierarchical folding initiated by similar foldons in the twins, at different order and rates. PpiA folding is delayed by less hydrophobic native contacts, frustrated residues and a β-turn in the earliest foldon and by signal peptide-mediated disruption of foldon hierarchy. When selected PpiA residues and/or its signal peptide were grafted onto PpiB, they converted it into a slow folder with enhanced in vivo secretion. These structural adaptations in a secretory protein facilitate trafficking.

In silico characterization of fructosyl peptide oxidase properties from Eupenicillium terrenum

Fructosyl peptide oxidase (FPOX) enzyme from Eupenicillium terrenum has a high potential to be applied as a diagnostic enzyme. The aim of the present study is the characterization of FPOX from E. terrenum using different bioinformatics tools. The computational prediction of the RNA and protein secondary structures of FPOX, solubility profile in Escherichia coli, stability, domains, and functional properties were performed. In the FPOX protein, six motifs were detected. The d-amino acid oxidase motif was found as the most important motif that is a FAD-dependent oxidoreductase. The cysteines including 97, 154, 234, 280, and 360 showed a lower score than -10 that have a low possibility for participitation in the formation of the SS bond. The 56.52% of FPOX amino acids are nonpolar. Random coils are dominant in the FPOX sequence, followed by alpha-helix and extended strand. The fpox gene is capable of generating a stable RNA secondary structure (-423.90 kcal/mol) in E. coli. FPOX has a large number of hydrophobic amino acids. FPOX showed a low solubility in E. coli which has several aggregation-prone sites in its 3-D structure. According to the scores, the best mutation candidate for increasing solubility was the conversion of methionine 302 to arginine. The melting temperature of FPOX based on its amino acid sequence was 55°C to 65°C. The amounts of thermodynamic parameters for the FPOX enzyme were -137.4 kcal/mol, -3.59 kcal/(mol K), and -6.8 kcal/mol for standard folding enthalpy, heat capacity, and folding free energy, respectively. In conclusion, the in silico study of proteins can provide a valuable method for better understanding the protein properties and functions for use in our purposes.

Production of biologically active recombinant buffalo leukemia inhibitory factor (BuLIF) in Escherichia Coli

Background

Leukemia inhibitory factor (LIF) is a multifunctional cytokine which plays multiple roles in different biological processes such as implantation, bone remodeling, and hematopoiesis. The buESCs are difficult to culture due to lack of proper understanding of the culture conditions. LIF is one of the important factors which maintain the pluripotency in embryonic stem cells and commercial LIF from murine and human origin is used in the establishment of buffalo embryonic stem cells (buESCs). The LIF from a foreign origin is not able to maintain pluripotency and proliferation in buESCs for a long term which is contributed by difference in the binding sites on LIF; therefore, culture medium supplemented with buffalo-specific LIF may enhance the efficiency of buESCs by improving the environment of culture conditions. The high cost of LIF is another major drawback which restricts buESCs research, thus limits the scope of buffalo stem cell use. Various methods have been developed to produce human and murine LIF in prokaryotic system. However, Buffalo leukemia inhibitory factor (BuLIF) has not been yet produced in prokaryotic system. Here, we describe a simple strategy for the expression and purification of biologically active BuLIF in Escherichia coli (E. coli).

Results

The BuLIF cDNA from buffalo (Bubalus bubalis) was cloned into pET22b(+) and expressed in E. coli Lemo-21(DE3). The expression of BuLIF was directed into periplasmic space of E. coli which resulted in the formation of soluble recombinant protein. One step immobilized metal affinity chromatography (IMAC chromatography) was performed for purification of BuLIF with ≥ 95% of homogeneity. The recombinant protein was confirmed by western blot and identified by mass spectroscopy. The biological activity of recombinant BuLIF was determined on murine myeloid leukemic cells (M1 cells) by MTT proliferation assay. The addition of BuLIF increased the reduction of MTT by stimulated M1 cells in a dose-dependent manner. The BuLIF induced the formation of macrophage like structures from M1 cells where they engulfed fluorescent latex beads. The recombinant BuLIF successfully maintained pluripotency in buffalo embryonic stem cells (buESCs) and were positive for stem cells markers such as Oct-4, Sox-2, Nanog, and alkaline phosphatase activity.

Conclusions

The present study demonstrated a simple method for the production of bioactive BuLIF in E. coli through single step purification. BuLIF effectively maintained buffalo embryonic stem cells pluripotency. Thus, this purified BuLIF can be used in stem cell study, biomedical, and agricultural research.

Supplementary Information

The online version contains supplementary material available at 10.1186/s43141-022-00328-1.

Extracellular secretion of a cutinase with polyester-degrading potential by E. coli using a novel signal peptide from Amycolatopsis mediterranei

Recent studies in this laboratory showed that an extracellular cutinase from A. mediterranei (AmCut) was able to degrade the plastics polycaprolactone and polybutylene succinate. Such plastics can be slow to degrade in soils due to a lack of efficient polyester degrading organisms. AmCut also showed potential for the biocatalytic synthesis of esters by reverse hydrolysis. The gene for AmCut has an upstream leader sequence whose transcript is not present in the purified enzyme. In this study, we show using predictive modelling, that this sequence codes for an N-terminal signal peptide that directs transmembrane expression via the Sec secretion pathway. E. coli is a useful host for recombinant enzymes used in biocatalysis due to the ease of genetic manipulation in this organism, which allows tuning of enzymes for specific applications, by mutagenesis. When a truncated GST-tagged AmCut gene (lacking its signal peptide) was expressed in E. coli, all cutinase activity was observed in the cytosolic fraction. However, when GST-tagged AmCut was expressed in E. coli along with its native signal peptide, cutinase activity was observed in both the periplasmic space and the culture medium. This finding revealed that the native signal peptide of a Gram-positive organism (AmCut) was being recognised by the Gram-negative (E. coli) Sec transmembrane transport system. AmCut was transported into E. coli's periplasmic space from where it was released into the culture medium. Surprisingly, the presence of a bulky GST tag at the N-terminus of the signal peptide did not hinder transmembrane targeting. Although the periplasmic targeting was unexpected, it is not unprecedented due to the conservation of the Sec pathway across species. It was more surprising that AmCut was secreted from the periplasmic space into the culture medium. This suggests that extracellular AmCut translocation across the E. coli outer membrane may involve non-classical secretion pathways. This tuneable recombinant E. coli expressing extracellular AmCut may be useful for degradation of polyester substrates in the environment; this and other applications are discussed.

Excretory expression of IsPETase in E. coli by an enhancer of signal peptides and enhanced PET hydrolysis

The PET hydrolase from Ideonella sakaiensis (IsPETase) is efficient for PET degradation, which provides a promising solution for environmental contamination by plastics. This study focuses on improving the excretion of IsPETase from E. coli by signal peptide (SP) engineering. A SP enhancer B1 (MERACVAV) was fused to the N-terminal of commonly-used SP (PelB, MalE, LamB, and OmpA) to mediate excretion of IsPETase. Strikingly, the modified SP B1OmpA, B1PelB, and B1MalE significantly increased the excretion of IsPETase, while IsPETase was basically expressed in periplasmic space without enhancer B1. The excretion efficiency of IsPETase mediated by B1PelB was improved by 62 folds compared to that of PelB. The hydrolysis of PET by crude IsPETase in culture solution was also enhanced. Furthermore, the amount of released MHET/TPA from PET by IsPETase was increased by 2.7 folds with pre-incubation of hydrophobin HFBII. Taken together, this work may provide a feasible strategy for the excretion and application of the IsPETase.

Novel intein-based self-cleaving affinity tag for recombinant protein production in Escherichia coli

We evaluated several intein-based self-cleaving affinity tags for expression and single-step affinity chromatography purification of recombinant proteins produced in Escherichia coli. We used human growth hormone (hGH) as target protein that contains two internal disulfide bridges and an N-terminal phenylalanine. Use of N-terminal thiol-induced Sce VMA1 intein affinity tag resulted in purified hGH deficient in disulfide bonds. Inteins with self-cleavage inducible by pH and/or temperature shift were analyzed. N-terminal Ssp DnaX intein affinity tag resulted in a completely cleaved cytosolic protein, whereas N-terminal Ssp DnaB intein affinity tag resulted in a cytosolic fusion protein incapable of releasing hGH. Periplasmic expression of target protein was analyzed using an N-terminal signal peptide and C-terminal Ssp DnaX pH-inducible self-cleaving affinity tag. The fusion protein was properly expressed in pH 8 buffered culture medium. Fusion of a periplasmic signal peptide to the N-terminus of the POI allowed secretion to the periplasmic region and presence of the natural N-terminal amino acid of the POI following cleavage. Periplasmic expression of hGH fused to this novel C-terminal DnaX intein-based self-cleaving affinity tag made possible expression and purification of hGH protein containing disulfide bonds and free of extra amino acids.

LyGo: A Platform for Rapid Screening of Lytic Polysaccharide Monooxygenase Production

Environmentally friendly sources of energy and chemicals are essential constituents of a sustainable society. An important step toward this goal is the utilization of biomass to supply building blocks for future biorefineries. Lytic polysaccharide monooxygenases (LPMOs) are enzymes that play a critical role in breaking the chemical bonds in the most abundant polymers found in recalcitrant biomass, such as cellulose and chitin. To use them in industrial processes they need to be produced in high titers in cell factories. Predicting optimal strategies for producing LPMOs is often nontrivial, and methods allowing for screening several strategies simultaneously are therefore needed. Here, we present a standardized platform for cloning LPMOs. The platform allows users to combine gene fragments with 14 different expression vectors in a simple 15 min reaction, thus enabling rapid exploration of several gene contexts, hosts, and expression strategies in parallel. The open-source LyGo platform is accompanied by easy-to-follow online protocols for both cloning and expression. As a demonstration of its utility, we explore different strategies for expressing several different LPMOs in Escherichia coli, Bacillus subtilis, and Komagataella phaffii.

Microcystin-LR heterologous genetically engineered antibody recombinant and its binding activity improvement and application in immunoassay

Microcystin-LR (MC-LR) is a high-toxic biohazard that pollutes ecological environment and agroproducts. In this study, a newly recombined genetically engineered antibody (AV_HH-MV_H) with higher thermal stability and binding activity was designed by chain shuffling and based on our previously obtained anti-MC-LR scFv and nanobody. Based on AV_HH-MV_H template, a capacity of 8.99 × 10⁵ CFU/mL of phage display AV_HH-MV_H mutagenesis library was constructed by site-directed mutagenesis in MV_H-CDR3 region, and then used for ultrasensitive mutants screening. Afterwards, a total of five positive AV_HH-MV_H mutants were isolated from the mutagenesis library, and their binding activity was higher than AV_HH-MV_H for MC-LR. The AV_HH-MV_H mutant 3 was cloned into pET-25b vector for soluble expression, and the concentration of target protein expressed in culture system was 43.5 mg/L. An indirect competitive enzyme-linked immunosorbent assay (IC-ELISA) was established based on purified AV_HH-MV_H mutant 3 protein, and it showed ultrasensitive binding activity for MC-LR with the detection limit of 0.0075 μg/L, which was far below the maximum residue limit standard of 1.0 μg/L in drinking water proposed by World Health Organization. The established IC-ELISA shows good accuracy, repeatability, stability and applicability for MC-LR spiked samples, and it is promising for MC-LR ultrasensitive monitoring.

Challenges Associated With the Formation of Recombinant Protein Inclusion Bodies in Escherichia coli and Strategies to Address Them for Industrial Applications

Recombinant proteins are becoming increasingly important for industrial applications, where Escherichia coli is the most widely used bacterial host for their production. However, the formation of inclusion bodies is a frequently encountered challenge for producing soluble and functional recombinant proteins. To overcome this hurdle, different strategies have been developed through adjusting growth conditions, engineering host strains of E. coli, altering expression vectors, and modifying the proteins of interest. These approaches will be comprehensively highlighted with some of the new developments in this review. Additionally, the unique features of protein inclusion bodies, the mechanism and influencing factors of their formation, and their potential advantages will also be discussed.

Unraveling the roles of the reductant and free copper ions in LPMO kinetics

BACKGROUND

Lytic polysaccharide monooxygenases (LPMOs) are monocopper enzymes that catalyze oxidative depolymerization of industrially relevant crystalline polysaccharides, such as cellulose, in a reaction that depends on an electron donor and O2 or H2O2. While it is well known that LPMOs can utilize a wide variety of electron donors, the variation in reported efficiencies of various LPMO-reductant combinations remains largely unexplained.

RESULTS

In this study, we describe a novel two-domain cellulose-active family AA10 LPMO from a marine actinomycete, which we have used to look more closely at the effects of the reductant and copper ions on the LPMO reaction. Our results show that ascorbate-driven LPMO reactions are extremely sensitive to very low amounts (micromolar concentrations) of free copper because reduction of free Cu(II) ions by ascorbic acid leads to formation of H2O2, which speeds up the LPMO reaction. In contrast, the use of gallic acid yields steady reactions that are almost insensitive to the presence of free copper ions. Various experiments, including dose-response studies with the enzyme, showed that under typically used reaction conditions, the rate of the reaction is limited by LPMO-independent formation of H2O2 resulting from oxidation of the reductant.

CONCLUSION

The strong impact of low amounts of free copper on LPMO reactions with ascorbic acid and O2, i.e. the most commonly used conditions when assessing LPMO activity, likely explains reported variations in LPMO rates. The observed differences between ascorbic acid and gallic acid show a way of making LPMO reactions less copper-dependent and illustrate that reductant effects on LPMO action need to be interpreted with great caution. In clean reactions, with minimized generation of H2O2, the (O2-driven) LPMO reaction is exceedingly slow, compared to the much faster peroxygenase reaction that occurs when adding H2O2.

Preparation and characterization of a novel thermostable lipase from Thermomicrobium roseum

In this study, a hypothetical lipase gene from Thermomicrobium roseum DSM 5159 (GenBank: ACM04789.1) was recombinantly expressed in two system and characterized.

Enhancing Recombinant Protein Yields in the E. coli Periplasm by Combining Signal Peptide and Production Rate Screening

Proteins that contain disulfide bonds mainly mature in the oxidative environment of the eukaryotic endoplasmic reticulum or the periplasm of Gram-negative bacteria. In E. coli, disulfide bond containing recombinant proteins are often targeted to the periplasm by an N-terminal signal peptide that is removed once it passes through the Sec-translocon in the cytoplasmic membrane. Despite their conserved targeting function, signal peptides can impact recombinant protein production yields in the periplasm, as can the production rate. Here, we present a combined screen involving different signal peptides and varying production rates that enabled the identification of more optimal conditions for periplasmic production of recombinant proteins with disulfide bonds. The data was generated from two targets, a single chain antibody fragment (BL1) and human growth hormone (hGH), with four different signal peptides and a titratable rhamnose promoter-based system that enables the tuning of protein production rates. Across the screen conditions, the yields for both targets significantly varied, and the optimal signal peptide and rhamnose concentration differed for each protein. Under the optimal conditions, the periplasmic BL1 and hGH were properly folded and active. Our study underpins the importance of combinatorial screening approaches for addressing the requirements associated with the production of a recombinant protein in the periplasm.

LC-MS/MS-based metabolic profiling of Escherichia coli under heterologous gene expression stress

Escherichia coli is frequently exploited for genetic manipulations and heterologous gene expression studies. We have evaluated the metabolic profile of E. coli strain BL21 (DE3) RIL CodonPlus after genetic modifications and subjecting to the production of recombinant protein. Three genetically variable E. coli cell types were studied, normal cells (susceptible to antibiotics) cultured in simple LB medium, cells harboring ampicillin-resistant plasmid pET21a (+), grown under antibiotic stress, and cells having recombinant plasmid pET21a (+) ligated with bacterial lactate dehydrogenase gene grown under ampicillin and standard isopropyl thiogalactoside (IPTG)-induced gene expression conditions. A total of 592 metabolites were identified through liquid chromatography-mass spectrometry/mass spectrometry analysis, feature and peak detection using XCMS and CAMERA followed by precursor identification by METLIN-based procedures. Overall, 107 metabolites were found differentially regulated among genetically modified cells. Quantitative analysis has shown a significant modulation in DHNA-CoA, p-aminobenzoic acid, and citrulline levels, indicating an alteration in vitamin K, folic acid biosynthesis, and urea cycle of E. coli cells during heterologous gene expression. Modulations in energy metabolites including NADH, AMP, ADP, ATP, carbohydrate, terpenoids, fatty acid metabolites, diadenosine tetraphosphate (Ap4A), and l-carnitine advocate major metabolic rearrangements. Our study provides a broader insight into the metabolic adaptations of bacterial cells during gene manipulation experiments that can be prolonged to improve the yield of heterologous gene products and concomitant production of valuable biomolecules.

Soluble expression of IGF1 fused to DsbA in SHuffle™ T7 strain: optimization of expression and purification by Box-Behnken design

Production of insulin-like growth factor 1 (IGF1) in Escherichia coli mostly results in the formation of inclusion bodies. In the present study, IGF1 was fused to disulfide bond oxidoreductase A (DsbA) and expressed in SHuffle™ T7 strain, in order to obtain correctly folded protein. Soluble expression and IMAC purification of DsbA-IGF1 were optimized by applying the Box-Behnken design of response surface methodology. The optimization greatly increased concentration of soluble protein from 317 to 2600 mg/L, and IMAC yield from 400 to 1900 mg/L. Results of ANOVA showed induction OD600 and temperature had significant effects on the soluble protein expression while isopropyl-β-d thiogalactoside, in the concentrations tested, displayed no significant effect. Moreover, the three parameters of the binding buffer including, pH, concentration of NaCl, and imidazole displayed significant effects on the IMAC yield. Then, purified DsbA-IGF1 was cleaved by human rhinovirus 3C protease, and authentic IGF1 was obtained in flow through of a subtractive IMAC. Final polishing of the protein by reversed-phase HPLC yielded IGF1 with purity of 96%. The quality attributes of purified IGF1 such as purity, identity, molecular size, molecular weight, secondary structure, and biological activity were assessed and showed to be comparable to the standard IGF1. The final yield of purified IGF1 was estimated to be 120 ± 18 mg from 1 L of the culture. Our results demonstrated a simple and easily scalable strategy for production of large amounts of bioactive IGF1 by rational designing soluble protein expression, and further optimization of expression and purification methods.

Bacterial Signal Peptidases

Signal peptidases are the membrane bound enzymes that cleave off the amino-terminal signal peptide from secretory preproteins . There are two types of bacterial signal peptidases . Type I signal peptidase utilizes a serine/lysine catalytic dyad mechanism and is the major signal peptidase in most bacteria. Type II signal peptidase is an aspartic protease specific for prolipoproteins. This chapter will review what is known about the structure, function and mechanism of these unique enzymes.