Biomass from microalgae: the potential of domestication towards sustainable biofactories

Harnessing recalcitrant lignocellulosic biomass for enhanced biohydrogen production: Recent advances, challenges, and future perspective

Biohydrogen (Bio-H2) is widely recognized as a sustainable and environmentally friendly energy source, devoid of any detrimental impact on the environment. Lignocellulosic biomass (LB) is a readily accessible and plentiful source material that can be effectively employed as a cost-effective and sustainable substrate for Bio-H2 production. Despite the numerous challenges, the ongoing progress in LB pretreatment technology, microbial fermentation, and the integration of molecular biology techniques have the potential to enhance Bio-H2 productivity and yield. Consequently, this technology exhibits efficiency and the capacity to meet the future energy demands associated with the valorization of recalcitrant biomass. To date, several pretreatment approaches have been investigated in order to improve the digestibility of feedstock. Nevertheless, there has been a lack of comprehensive systematic studies examining the effectiveness of pretreatment methods in enhancing Bio-H2 production through dark fermentation. Additionally, there is a dearth of economic feasibility evaluations pertaining to this area of research. Thus, this review has conducted comparative studies on the technological and economic viability of current pretreatment methods. It has also examined the potential of these pretreatments in terms of carbon neutrality and circular economy principles. This review paves the way for a new opportunity to enhance Bio-H2 production with technological approaches.

Impact of green and blue-green light on the growth, pigment concentration, and fatty acid unsaturation in the microalga Monoraphidium braunii

The spectral composition of light is an important factor for the metabolism of photosynthetic organisms. Several blue light-regulated metabolic processes have already been identified in the industrially relevant microalga Monoraphidium braunii. However, little is known about the spectral impact on this species' growth, fatty acid (FA), and pigment composition. In this study, M. braunii was cultivated under different light spectra (white light: 400-700 nm, blue light: 400-550 nm, green light: 450-600 nm, and red light: 580-700 nm) at 25°C for 96 h. The growth was monitored daily. Additionally, the FA composition, and pigment concentration was analyzed after 96 h. The highest biomass production was observed upon white light and red light irradiation. However, green light also led to comparably high biomass production, fueling the scientific debate about the contribution of weakly absorbed light wavelengths to microalgal biomass production. All light spectra (white, blue, and green) that comprised blue-green light (450-550 nm) led to a higher degree of FA unsaturation and a greater concentration of all identified pigments than red light. These results further contribute to the growing understanding that blue-green light is an essential trigger for maximized pigment concentration and FA unsaturation in green microalgae.

Selection of microalgae in artificial digestate: Strategies towards an effective phycoremediation

Digestate is a complex by-product of anaerobic digestion and its composition depends on the digestor inputs. It can be exploited as a sustainable source of nutrients for microalgae cultivation but its unbalanced composition and toxic elements make the use challenging. Screening algae in a simplified synthetic digestate which mimics the main nutrient constraints of a real digestate is proposed as a reproducible and effective method to select suitable species for real digestate valorisation and remediation. Growth performance, nutrient removal and biomass composition of eight microalgae exposed to high amounts of NH4+, PO4- and organic-C were assessed. Using a score matrix, A. protothecoides, T. obliquus, C. reinhardtii, and E. gracilis were identified as the most promising species. Thus, three strategies were applied to improve outcomes: i) establishment of an algal consortium to improve biomass production, ii) K+ addition to the medium to promote K+ uptake over NH4+ and to reduce potential NH4+ toxicity, iii) P starvation as pretreatment for enhanced P removal by luxury uptake. The consortium was able to implement a short-term response displaying higher biomass production than single species (3.77 and 1.03-1.89 mg mL-1 respectively) in synthetic digestate while maintaining similar nutrient remediation, furthermore, its growth rate was 1.6 times higher than in the control condition. However, the strategies aiming to reduce NH4+ toxicity and higher P removal were not successful except for single cases. The proposed algal screening and the resulting designed consortium were respectively a reliable method and a powerful tool towards sustainable real digestate remediation.

Microalgae as a potential natural source for the green synthesis of nanoparticles

The increasing global population is driving the development of alternative sources of food and energy, as well as better or new alternatives for health and environmental care, which represent key challenges in the field of biotechnology. Microalgae represent a very important source material to produce several high-value-added bioproducts. Due to the rapid changes in the modern world, there is a need to build new materials for use, including those in the nanometer size, although these developments may be chronological but often do not occur at a time. In the last few years, a new frontier has opened up at the interface of biotechnology and nanotechnology. This new frontier could help microalgae-based nanomaterials to possess new functions and abilities. Processes for the green synthesis of nanomaterials are being investigated, and the availability of biological resources such as microalgae is continuously being examined. The present review provides a concise overview of the recent advances in the synthesis, characterization, and applications of nanoparticles formed using a wide range of microalgae-based biosynthesis processes. Highlighting their innovative and sustainable potential in current research, our study contributes towards the in-depth understanding and provides latest updates on the alternatives offered by microalgae in the synthesis of nanomaterials.

Toxicity and bioremediation of the lead: a critical review

Lead is a naturally occurring, bluish-gray metal that is found in small quantities in the earth's crust. The existing literature demonstrates that non-biodegradable character and continuous use results in accumulation of lead concentration in the environment and causes various ill effects such as neurotoxicity, change in psychological and behavioral development of different organisms. Nowadays the most effective technique in the revival of the environment is bioremediation and it is environmentally friendly and cost-effective. Bacterial strains such as Oceanobacillus profundus and Lactobacillus acidophilus ATCC4356 have the ability to reduce lead 97% and 73.9%, respectively. Similarly some species of algae and fungal strains also showed lead removal efficiency as 74% (spirulina), 97.1% (Chlorella kessleri), 95.5% (Penicillium janthinillum) and 86% (Aspergillus flavus). Biodegradation of lead by various microbes would be the most efficient and sustainable approach. This review focuses on toxicity, fate of lead in the environment and its microbial degradation.

Synthesis and utilization of biomass-derived sulfonated heterogeneous catalyst-BT-SO3H for microalgal biodiesel production

The study investigates the potential of utilizing banana trunk-derived porous activated biochar enriched with SO3H- as a catalyst for eco-friendly biodiesel production from the microalga Chlorella vulgaris. An extensive analysis, employing advanced techniques such as XRD, FTIR, TGA, XPS, NH3-TPD, BET, SEM-EDX, and TEM, was conducted to elucidate the physicochemical properties of BT-SO3H catalysts. The synthesized catalyst demonstrated its efficiency in converting the total lipids of Chlorella vulgaris into biodiesel, with varying concentrations of 3%, 5%, and 7%. Notably, using a 5% BT-SO3H concentration resulted in remarkably higher biodiesel production about 58.29%. Additionally, the fatty acid profile of C. vulgaris biodiesel indicated that C16:0 was the predominant fatty acid at 24.31%, followed by C18:1 (19.68%), C18:3 (11.45%), and C16:1 (7.56%). Furthermore, the biodiesel produced via 5% BT-SO3H was estimated to have higher levels of saturated fatty acids (SFAs) at 34.28%, monounsaturated fatty acids (MUFAs) at 30.70%, and polyunsaturated fatty acids (PUFAs) at 24.24%. These findings highlight the promising potential of BT-SO3H catalysts for efficient and environmentally friendly biodiesel production from microalgal species.

Harnessing genetic engineering to drive economic bioproduct production in algae

Our reliance on agriculture for sustenance, healthcare, and resources has been essential since the dawn of civilization. However, traditional agricultural practices are no longer adequate to meet the demands of a burgeoning population amidst climate-driven agricultural challenges. Microalgae emerge as a beacon of hope, offering a sustainable and renewable source of food, animal feed, and energy. Their rapid growth rates, adaptability to non-arable land and non-potable water, and diverse bioproduct range, encompassing biofuels and nutraceuticals, position them as a cornerstone of future resource management. Furthermore, microalgae's ability to capture carbon aligns with environmental conservation goals. While microalgae offers significant benefits, obstacles in cost-effective biomass production persist, which curtails broader application. This review examines microalgae compared to other host platforms, highlighting current innovative approaches aimed at overcoming existing barriers. These approaches include a range of techniques, from gene editing, synthetic promoters, and mutagenesis to selective breeding and metabolic engineering through transcription factors.

The Role of Light on the Microalgae Biotechnology: Fundamentals, Technological Approaches, and Sustainability Issues

Light energy directly affects microalgae growth and productivity. Microalgae in natural environments receive light through solar fluxes, and their duration and distribution are highly variable over time. Consequently, microalgae must adjust their photosynthetic processes to avoid photo limitation and photoinhibition and maximize yield. Considering these circumstances, adjusting light capture through artificial lighting in the main culture systems benefits microalgae growth and induces the production of commercially important compounds. In this sense, this review provides a comprehensive study of the role of light in microalgae biotechnology. For this, we present the main fundamentals and reactions of metabolism and metabolic alternatives to regulate photosynthetic conversion in microalgae cells. Light conversions based on natural and artificial systems are compared, mainly demonstrating the impact of solar radiation on natural systems and lighting devices, spectral compositions, periodic modulations, and light fluxes when using artificial lighting systems. The most commonly used photobioreactor design and performance are shown herein, in addition to a more detailed discussion of light-dependent approaches in these photobioreactors. In addition, we present the principal advances in photobioreactor projects, focusing on lighting, through a patent-based analysis to map technological trends. Lastly, sustainability and economic issues in commercializing microalgae products were presented.

Process optimization of one-step direct transesterification and dual-step extraction-transesterification of the Chlorococcum-Nannochloropsis consortium for biodiesel production

In the present study, the efficacy of one-step direct transesterification (OSDT) and Dual-step extraction-transesterification (DSET) of Chlorococcum sp., Nannochloropsis sp., and their consortium was evaluated for fatty acid methyl ester (FAME) yield. Initially, the biomass yield and lipid content of the two strains and their consortium were estimated. Of the biomasses, the consortium showed a higher biomass yield of 1.41 g/L and lipid content of 30.2%, which is higher than the monocultures irrespective of the different biomass drying methods used. With regards to the FAME yield, OSDT and DSET have yielded almost similar quantities about 21 g/100g dried biomass. Of the different reaction conditions of OSDT tested, a higher FAME yield at 70-71% (based on lipid weight) was obtained at 75 °C reaction temperature, 3 h reaction time with a 2g sample size. Eventually, the fatty acid composition of consortium biomass revealed higher levels of saturated and monounsaturated fatty acids in the vicinity of 46 and 25%, respectively. Based on the results, it is concluded that OSDT is a promising method due to its low energy consumption, cost-effective and time-saving attributes for quality biodiesel production from the Chlorococcum-Nannochloropsis consortium.

Biosensors in microalgae: A roadmap for new opportunities in synthetic biology and biotechnology

Biosensors are powerful tools to investigate, phenotype, improve and prototype microbial strains, both in fundamental research and in industrial contexts. Genetic and biotechnological developments now allow the implementation of synthetic biology approaches to novel different classes of microbial hosts, for example photosynthetic microalgae, which offer unique opportunities. To date, biosensors have not yet been implemented in phototrophic eukaryotic microorganisms, leaving great potential for novel biological and technological advancements untapped. Here, starting from selected biosensor technologies that have successfully been implemented in heterotrophic organisms, we project and define a roadmap on how these could be applied to microalgae research. We highlight novel opportunities for the development of new biosensors, identify critical challenges, and finally provide a perspective on the impact of their eventual implementation to tackle research questions and bioengineering strategies. From studying metabolism at the single-cell level to genome-wide screen approaches, and assisted laboratory evolution experiments, biosensors will greatly impact the pace of progress in understanding and engineering microalgal metabolism. We envision how this could further advance the possibilities for unraveling their ecological role, evolutionary history and accelerate their domestication, to further drive them as resource-efficient production hosts.

Description and Characterization of the Odontella aurita OAOSH22, a Marine Diatom Rich in Eicosapentaenoic Acid and Fucoxanthin, Isolated from Osan Harbor, Korea

Third-generation biomass production utilizing microalgae exhibits sustainable and environmentally friendly attributes, along with significant potential as a source of physiologically active compounds. However, the process of screening and localizing strains that are capable of producing high-value-added substances necessitates a significant amount of effort. In the present study, we have successfully isolated the indigenous marine diatom Odontella aurita OAOSH22 from the east coast of Korea. Afterwards, comprehensive analysis was conducted on its morphological, molecular, and biochemical characteristics. In addition, a series of experiments was conducted to analyze the effects of various environmental factors that should be considered during cultivation, such as water temperature, salinity, irradiance, and nutrients (particularly nitrate, silicate, phosphate, and iron). The morphological characteristics of the isolate were observed using optical and electron microscopes, and it exhibited features typical of O. aurita. Additionally, the molecular phylogenetic inference derived from the sequence of the small-subunit 18S rDNA confirmed the classification of the microalgal strain as O. aurita. This isolate has been confirmed to contain 7.1 mg g-1 dry cell weight (DCW) of fucoxanthin, a powerful antioxidant substance. In addition, this isolate contains 11.1 mg g-1 DCW of eicosapentaenoic acid (EPA), which is one of the nutritionally essential polyunsaturated fatty acids. Therefore, this indigenous isolate exhibits significant potential as a valuable source of bioactive substances for various bio-industrial applications.

CRISPR-based bioengineering in microalgae for production of industrially important biomolecules

Microalgae, as photosynthetic organisms, have the potential to produce biomolecules for use in food, feed, cosmetics, nutraceuticals, fuel, and other applications. Faster growth rates and higher protein and lipid content make microalgae a popular chassis for many industrial applications. However, challenges such as low productivity and high production costs have limited their commercialization. To overcome these challenges, bioengineering approaches such as genetic engineering, metabolic engineering, and synthetic biology have been employed to improve the productivity and quality of microalgae-based products. Genetic engineering employing genome editing tools like CRISPR/Cas allows precise and targeted genetic modifications. CRISPR/Cas systems are presently used to modify the genetic makeup of microalgae for enhanced production of specific biomolecules. However, these tools are yet to be explored explicitly in microalgae owing to some limitations. Despite the progress made in CRISPR-based bioengineering approaches, there is still a need for further research to optimize the production of microalgae-based products. This includes improving the efficiency of genome editing tools, understanding the regulatory mechanisms of microalgal metabolism, and optimizing growth conditions and cultivation strategies. Additionally, addressing the ethical, social, and environmental concerns associated with genetic modification of microalgae is crucial for the responsible development and commercialization of microalgae-based products. This review summarizes the advancements of CRISPR-based bioengineering for production of industrially important biomolecules and provides key considerations to use CRISPR/Cas systems in microalgae. The review will help researchers to understand the progress and to initiate genome editing experiments in microalgae.

Flocculation of oleaginous green algae with Mortierella alpina fungi

Microalgae are promising sources of valuable bioproducts such as biofuels, food, and nutraceuticals. However, harvesting microalgae is challenging due to their small size and low biomass concentrations. To address this challenge, bio-flocculation of starchless mutants of Chlamydomonas reinhardtii (sta6/sta7) was investigated with Mortierella alpina, an oleaginous fungus with high concentrations of arachidonic acid (ARA). Triacylglycerides (TAG) reached 85 % of total lipids in sta6 and sta7 through a nitrogen regime. Scanning electron microscopy determined cell-wall attachment and extra polymeric substances (EPS) to be responsible for flocculation. An algal-fungal biomass ratio around 1:1 (three membranes) was optimal for bio-flocculation (80-85 % flocculation efficiency in 24 h). Nitrogen-deprived sta6/sta7 were flocculated with strains of M. alpina (NVP17b, NVP47, and NVP153) with aggregates exhibiting fatty acid profiles similar to C. reinhardtii, with ARA (3-10 % of total fatty acids). This study showcases M. alpina as a strong bio-flocculation candidate for microalgae and advances a mechanistic understanding of algal-fungal interaction.

Simultaneous CAS9 editing of cpSRP43, LHCA6, and LHCA7 in Picochlorum celeri lowers chlorophyll levels and improves biomass productivity

High cellular pigment levels in dense microalgal cultures contribute to excess light absorption. To improve photosynthetic yields in the marine microalga Picochlorum celeri, CAS9 gene editing was used to target the molecular chaperone cpSRP43. Depigmented strains (>50% lower chlorophyll) were generated, with proteomics showing attenuated levels of most light harvesting complex (LHC) proteins. Gene editing generated two types of cpSRP43 transformants with distinct lower pigment phenotypes: (i) a transformant (Δsrp43) with both cpSRP43 diploid alleles modified to encode non-functional polypeptides and (ii) a transformant (STR30309) with a 3 nt in-frame insertion in one allele at the CAS9 cut site (non-functional second allele), leading to expression of a modified cpSRP43. STR30309 has more chlorophyll than Δsrp43 but substantially less than wild type. To further decrease light absorption by photosystem I in STR30309, CAS9 editing was used to stack in disruptions of both LHCA6 and LHCA7 to generate STR30843, which has higher (5-24%) productivities relative to wild type in solar-simulating bioreactors. Maximal productivities required frequent partial harvests throughout the day. For STR30843, exemplary diel bioreactor yields of ~50 g m-2 day-1 were attained. Our results demonstrate diel productivity gains in P. celeri by lowering pigment levels.

Surface properties of membrane materials and their role in cell adhesion and biofilm formation of microalgae

In this study, the effects of surface properties of membrane materials on microalgae cell adhesion and biofilm formation were investigated using Chlorella vulgaris and five different types of membrane materials under hydrodynamic conditions. The results suggest that the contact angle (hydrophobicity), surface free energy, and free energy of cohesion of membrane materials alone could not sufficiently elucidate the selectivity of microalgae cell adhesion and biofilm formation on membrane materials surfaces, and membrane surface roughness played a dominant role in controlling biofilm formation rate, under tested hydrodynamic conditions. A lower level of biofilm EPS production was generally associated with a larger amount of biofilm formation. The zeta potential of membrane materials could enhance initial microalgae cell adhesion and biofilm formation through salt bridging or charge neutralization mechanisms.

Identification of Marine Biotechnology Value Chains with High Potential in the Northern Mediterranean Region

Marine (blue) biotechnology is an emerging field enabling the valorization of new products and processes with massive potential for innovation and economic growth. In the Mediterranean region, this innovation potential is not exploited as well as in other European regions due to a lack of a clear identification of the different value chains and the high fragmentation of business innovation initiatives. As a result, several opportunities to create an innovative society are being missed. To address this problem, eight Northern Mediterranean countries (Croatia, France, Greece, Italy, Montenegro, Portugal, Slovenia and Spain) established five national blue biotechnology hubs to identify and address the bottlenecks that prevent the development of marine biotechnology in the region. Following a three-step approach (1. Analysis: setting the scene; 2. Transfer: identification of promising value chains; 3. Capitalization: community creation), we identified the three value chains that are most promising for the Northern Mediterranean region: algae production for added-value compounds, integrated multi-trophic aquaculture (IMTA) and valorization aquaculture/fisheries/processing by-products, unavoidable/unwanted catches and discards. The potential for the development and the technical and non-technical skills that are necessary to advance in this exciting field were identified through several stakeholder events which provided valuable insight and feedback that should be addressed for marine biotechnology in the Northern Mediterranean region to reach its full potential.

Integrating microalgae production into mine closure plans

Examples of successful mine closure and acceptable regional transitioning of mining areas are scarce. The recent changes to the environmental, social and governance (ESG) obligations of mining companies should help to ensure that water and land resources as well as post-mining employment opportunities are considered as a part of mine closure. Integrating microalgae production into mine closure plans is a potential opportunity for mining companies to improve many ESG outcomes. Mine sites with sufficient suitable land and water resources in high solar radiation geographies may be able to economically grow microalgae to capture atmospheric CO₂, re-purpose saline mine waters, treat acidic and near-neutral pH metalliferous waters as well as produce soil ameliorants (biofertiliser, biostimulants and/or biochar) to improve mine rehabilitation outcomes. Microalgae production facilities may also provide an alternative industry and employment opportunities to help transition regional mining towns that have become reliant on mining activities. The potential economic, environmental and social benefits of using mine-influenced water for microalgae production may offer an opportunity to successfully close and transition some mining landscapes.

Microalgal Feedstock for Biofuel Production: Recent Advances, Challenges, and Future Perspective

Globally, nations are trying to address environmental issues such as global warming and climate change, along with the burden of declining fossil fuel reserves. Furthermore, countries aim to reach zero carbon emissions within the existing and rising global energy crisis. Therefore, bio-based alternative sustainable feedstocks are being explored for producing bioenergy. One such renewable energy resource is microalgae; these are photosynthetic microorganisms that grow on non-arable land, in extreme climatic conditions, and have the ability to thrive even in sea and wastewater. Microalgae have high photosynthetic efficiencies and biomass productivity compared to other terrestrial plants. Whole microalgae biomass or their extracted metabolites can be converted to various biofuels such as bioethanol, biodiesel, biocrude oil, pyrolytic bio-oil, biomethane, biohydrogen, and bio jet fuel. However, several challenges still exist before faster and broader commercial application of microalgae as a sustainable bioenergy feedstock for biofuel production. Selection of appropriate microalgal strains, development of biomass pre-concentrating techniques, and utilization of wet microalgal biomass for biofuel production, coupled with an integrated biorefinery approach for producing value-added products, could improve the environmental sustainability and economic viability of microalgal biofuel. This article will review the current status of research on microalgal biofuels and their future perspective.

Nordic microalgae produce biostimulant for the germination of tomato and barley seeds

Microalgal biomass may have biostimulating effects on plants and seeds due to its phytohormonal content, and harnessing this biostimulating effect could contribute to sustainable agriculture. Two Nordic strains of freshwater microalgae species Chlorella vulgaris and Scenedesmus obliquus were each cultivated in a photobioreactor receiving untreated municipal wastewater. The algal biomass and the supernatant after algal cultivation were tested on tomato and barley seeds for biostimulating effects. Intact algal cells, broken cells, or harvest supernatant were applied to the seeds, and germination time, percentage and germination index were evaluated. Seeds treated with C. vulgaris, in particular intact cells or supernatant, had up to 25 percentage units higher germination percentage after 2 days and an overall significantly faster germination time (germinated on average between 0.5 and 1 day sooner) than seeds treated with S. obliquus or the control (water). The germination index was higher in C. vulgaris treatments than in the control for both tomato and barley, and this was observed for both broken and intact cells as well as supernatant. The Nordic strain of C. vulgaris cultivated in municipal wastewater thus shows potential for use as biostimulant in agriculture, adding novel economic and sustainability benefits.

Biotechnological response curve of the cyanobacterium Spirulina subsalsa to light energy gradient

BACKGROUND

Microalgae represent a suitable and eco-sustainable resource for human needs thanks to their fast growth ability, together with the great diversity in species and intracellular secondary bioactive metabolites. These high-added-value compounds are of great interest for human health or animal feed. The intracellular content of these valuable compound families is tightly associated with the microalgal biological state and responds to environmental cues, e.g., light. Our study develops a Biotechnological response curve strategy exploring the bioactive metabolites synthesis in the marine cyanobacterium Spirulina subsalsa over a light energy gradient. The Relative Light energy index generated in our study integrates the red, green and blue photon flux density with their relative photon energy. The Biotechnological response curve combined biochemical analysis of the macromolecular composition (total protein, lipid, and carbohydrate content), total sterols, polyphenols and flavonoids, carotenoids, phenolic compounds, vitamins (A, B₁, B₂, B₆, B₉, B₁₂, C, D₂, D₃, E, H, and K₁), phycobiliproteins, together with the antioxidant activity of the biomass as well as the growth ability and photosynthesis.

RESULTS

Results demonstrated that light energy significantly modulate the biochemical status of the microalga Spirulina subsalsa revealing the relevance of the light energy index to explain the light-induced biological variability. The sharp decrease of the photosynthetic rate at high light energy was accompanied with an increase of the antioxidant network response, such as carotenoids, total polyphenols, and the antioxidant capacity. Conversely, low light energy favorized the intracellular content of lipids and vitamins (B₂, B₆, B₉, D₃, K₁, A, C, H, and B₁₂) compared to high light energy.

CONCLUSIONS

Results of the Biotechnological response curves were discussed in their functional and physiological relevance as well as for the essence of their potential biotechnological applications. This study emphasized the light energy as a relevant tool to explain the biological responses of microalgae towards light climate variability, and, therefore, to design metabolic manipulation of microalgae.

Microalgae identification: Future of image processing and digital algorithm

The identification of microalgae species is an important tool in scientific research and commercial application to prevent harmful algae blooms (HABs) and recognizing potential microalgae strains for the bioaccumulation of valuable bioactive ingredients. The aim of this study is to incorporate rapid, high-accuracy, reliable, low-cost, simple, and state-of-the-art identification methods. Thus, increasing the possibility for the development of potential recognition applications, that could identify toxic-producing and valuable microalgae strains. Recently, deep learning (DL) has brought the study of microalgae species identification to a much higher depth of efficiency and accuracy. In doing so, this review paper emphasizes the significance of microalgae identification, and various forms of machine learning algorithms for image classification, followed by image pre-processing techniques, feature extraction, and selection for further classification accuracy. Future prospects over the challenges and improvements of potential DL classification model development, application in microalgae recognition, and image capturing technologies are discussed accordingly.

The Influence of Ultrasound on the Growth of Nannochloris sp. in Modified Growth Medium

The influence of ultrasound irradiation on the algal biomass productivity as well as its oil content and fatty acids profile, grown in a modified Zarrouk medium, i.e., deproteinized whey waste solution, was investigated. The algal samples (Nannochloris sp. 424-1 microalgae) were grown for 7 days in a thermostated incubator at 28 °C, shaken under continuous light. During this period, the algal biomass was subjected to induced stress by ultrasonic irradiation at different powers and sonication time. The obtained results demonstrate that ultrasound stressing of algae biomass has a positive effect on both the quantity of biomass and the oil obtained, also causing a shift in fatty acid composition by increasing the proportion of C16 and C18 polyunsaturated fatty acids. A low dosage level of exposure to the ultrasound led to algal biomass increase as well as lipid accumulation. For both types of irradiation modes which were investigated, daily and only initial irradiation, the beneficial effect of the ultrasound decreases as the exposure time increases and the excessive sonication becomes detrimental to microalgae growth.

On the human health benefits of microalgal phytohormones: An explorative in silico analysis

Phytohormones represent a group of secondary metabolites with different chemical structures, in which belong auxins, cytokinins, gibberellins, or brassinosteroids. In higher plants, they cover active roles in growth or defense function, while their potential benefits for human health protection were noted for some phytohormones and little explored for many others. In this study, we developed a target fishing strategy on fifty-three selected naturally occurring phytohormones covering different families towards proteins involved in key cellular functions related to human metabolism and health protection/disease. This in silico analysis strategy aims to screen the potential human health-driven bioactivity of more than fifty phytohormones through the analysis of their interactions with specific targets. From this analysis, twenty-eight human targets were recovered. Some targets e.g., the proteins mitochondrial glutamate dehydrogenase (GLUD1) or nerve growth factor (NGF) bound many phytohormones, highlighting their involvement in amino acid metabolism and/or in the maintenance or survival of neurons. Conversely, some phytohormones specifically interacted with some proteins, e.g., SPRY domain-containing SOCS box protein 2 (SPSB2) or Inosine-5'-monophosphate dehydrogenase 1 (IMPDH1), both involved in human immune response. They were then investigated with a molecular docking analysis approach. Our bioprospecting study indicated that many phytohormones may endow human health benefits, with potential functional role in multiple cellular processes including immune response and cell cycle progression.

Advances in Genetic Engineering in Improving Photosynthesis and Microalgal Productivity

Even though sunlight energy far outweighs the energy required by human activities, its utilization is a key goal in the field of renewable energies. Microalgae have emerged as a promising new and sustainable feedstock for meeting rising food and feed demand. Because traditional methods of microalgal improvement are likely to have reached their limits, genetic engineering is expected to allow for further increases in the photosynthesis and productivity of microalgae. Understanding the mechanisms that control photosynthesis will enable researchers to identify targets for genetic engineering and, in the end, increase biomass yield, offsetting the costs of cultivation systems and downstream biomass processing. This review describes the molecular events that happen during photosynthesis and microalgal productivity through genetic engineering and discusses future strategies and the limitations of genetic engineering in microalgal productivity. We highlight the major achievements in manipulating the fundamental mechanisms of microalgal photosynthesis and biomass production, as well as promising approaches for making significant contributions to upcoming microalgal-based biotechnology.

Recent advances in lignocellulosic and algal biomass pretreatment and its biorefinery approaches for biochemicals and bioenergy conversion

As the global demand for sustainable energy increases, lignocellulosic (such as agricultural residues, forest biomass, municipal waste, and dedicated energy crops) and algal (including macroalgae and microalgae) biomass have attracted considerable attention, because of their high availability of carbohydrates. This is a potential feedstock to produce biochemical and bioenergy. Pretreatment of biomass can disrupt their complex structure, increasing conversion efficiency and product yield. Therefore, this review comprehensively discusses recent advances in different pretreatments (physical, chemical, physicochemical, and biological pretreatments) for lignocellulosic and algal biomass and their biorefining methods. Life cycle assessment (LCA) which enables the quantification of the environmental impact assessment of a biorefinery also be introduced. Biorefinery processes such as raw material acquisition, extraction, production, waste accumulation, and waste conversion are all monitored under this concept. Nevertheless, there still exist some techno-economic barriers during biorefinery and extensive research is still needed to develop cost-effective processes.

Effects of high-strength landfill leachate effluent on stress-induced microalgae lipid production and post-treatment micropollutant degradation

This research investigates the effects of landfill leachate effluent concentrations from moving bed biofilm reactor (MBBR) on stress-induced Chlorella vulgaris and Scenedesmus armatus lipid production and post-treatment micropollutant degradation. The effluent concentrations were varied between 25%, 50%, 75%, and 100% (v/v). The landfill leachate influent was treated using two-stage moving bed biofilm reactor under 24 h and 18 h hydraulic retention time (HRT). The results indicated that the effluent concentration was positively correlated with the stress-induced microalgae lipid production in the post-treatment of residual micropollutants. C. vulgaris and S. armatus completely remove residual micropollutants in the effluent. The superoxide dismutase and peroxidase activity were positively correlated with the cellular lipid content. The lipid content of C. vulgaris and S. armatus cultivated in the 18 h HRT effluent were 31-51% and 51-64%, while those in the 24 h HRT effluent were 15-16% and 5-19%. The optimal condition of microalgae cultivation for the post-treatment of residual micropollutants was 50-75% (v/v) effluent concentrations under 18 h HRT, achieving the highest lipid production of 113-116 mg/L for C. vulgaris and 74-75 mg/L for S. armatus. Essentially, the MBBR landfill leachate effluent holds promising potential as a substrate for microalgae lipid production.

Trait drift in microalgae and applications for strain improvement

Microalgae are increasingly used to generate a wide range of commercial products, and there is growing evidence that microalgae-based products can be produced sustainably. However, industrial production of microalgal biomass is not as developed as other biomanufacturing platform technologies. In addition, results of bench-scale research often fail to translate to large-scale or mass production systems. This disconnect may result from trait drift and evolution occurring, through time, in response to unique drivers in each environment, such as cultivation regimes, weather, and pests. Moreover, outdoor and indoor cultivation of microalgae has the potential to impose negative selection pressures, which makes the maintenance of desired traits a challenge. In this context, this review sheds the light on our current understanding of trait drift and evolution in microalgae. We delineate the basics of phenotype plasticity and evolution, with a focus on how microalgae respond under various conditions. In addition, we review techniques that exploit phenotypic plasticity and evolution for strain improvement in view of industrial commercial applications, highlighting associated advantages and shortcomings. Finally, we suggest future research directions and recommendations to overcome unwanted trait drift and evolution in microalgae cultivation.

Microalgae/cyanobacteria: the potential green future of vitamin B12 production

This review summarizes the available information about potential sources of vitamin B12, especially for people who follow a vegan or vegetarian diet and inhabitants of poor countries in the developing world. Cyanobacteria and microalgae approved for food purposes can play a critical role as promising and innovative sources of this vitamin. This work involves a discussion of whether the form of vitamin B12 extracted from microalgae/cyanobacteria is biologically available to humans, specifically focusing on the genera Arthrospira and Chlorella. It describes analyses of their biomass composition, cultivation requirements, and genetic properties in B12 production. Furthermore, this review discusses the function of cobalamin in microalgae and cyanobacteria themselves and the possibility of modification and cocultivation to increase the content of B12 in their biomass.

Recent advances in the bio-application of microalgae-derived biochemical metabolites and development trends of photobioreactor-based culture systems

Microalgae are microscopic algae in sizes ranging from a few micrometers to several hundred micrometers. On average, half of the oxygen in the atmosphere is produced by the photosynthetic process of microalgae, so the role of these microorganisms in the life cycle of the planet is very significant. Pharmaceutical products derived from microalgae and commercial developments of a variety of supplements extracted from them originate from a variety of their specific secondary metabolites. Many of these microalgae are a reservoir of unique biological compounds including carotenoids, antioxidants, fatty acids, polysaccharides, enzymes, polymers, peptides, pigments, toxins and sterols with antimicrobial, antiviral, antifungal, antiparasitic, anticoagulant, and anticancer properties. The present work begins with an introduction of the importance of microalgae in renewable fuels and biodiesel production, the development of healthy food industry, and the creation of optimal conditions for efficient biomass yield. This paper provides the latest research related to microalgae-derived substances in the field of improving drug delivery, immunomodulatory, and anticancer attributes. Also, the latest advances in algal biocompounds to combat the COVID-19 pandemic are presented. In the subject of cultivation and growth of microalgae, the characteristics of different types of photobioreactors, especially their latest forms, are fully discussed along with their advantages and obstacles. Finally, the potential of microalgae biomass in biotechnological applications, biofuel production, as well as various biomass harvesting methods are described.

Recent Advances in Marine Microalgae Production: Highlighting Human Health Products from Microalgae in View of the Coronavirus Pandemic (COVID-19)

Blue biotechnology can greatly help solve some of the most serious social problems due to its wide biodiversity, which includes marine environments. Microalgae are important resources for human needs as an alternative to terrestrial plants because of their rich biodiversity, rapid growth, and product contributions in many fields. The production scheme for microalgae biomass mainly consists of two processes: (I) the Build-Up process and (II) the Pull-Down process. The Build-Up process consists of (1) the super strain concept and (2) cultivation aspects. The Pull-Down process includes (1) harvesting and (2) drying algal biomass. In some cases, such as the manufacture of algal products, the (3) extraction of bioactive compounds is included. Microalgae have a wide range of commercial applications, such as in aquaculture, biofertilizer, bioenergy, pharmaceuticals, and functional foods, which have several industrial and academic applications around the world. The efficiency and success of biomedical products derived from microalgal biomass or its metabolites mainly depend on the technologies used in the cultivation, harvesting, drying, and extraction of microalgae bioactive molecules. The current review focuses on recent advanced technologies that enhance microalgae biomass within microalgae production schemes. Moreover, the current work highlights marine drugs and human health products derived from microalgae that can improve human immunity and reduce viral activities, especially COVID-19.

Influence of exogenous phytohormone supplementation on the pigment and fatty acid content of three marine diatoms

Diatoms are ubiquitous photosynthetic microorganisms with great potential for biotechnological applications. However, their commercialisation is hampered by production costs, requiring hence optimisation of cultivation methods. Phytohormones are plant growth regulators which may be used to influence physiological processes in microalgae, including diatoms. In this study, the model species Phaeodactylum tricornutum (Phaeodactylaceae) and two Irish isolates of Stauroneis sp. (Stauroneidaceae) and Nitzschia sp. (Bacillariaceae) were grown with varying amounts of the phytohormones indoleacetic acid (IAA), gibberellic acid (GA3), methyl jasmonate (MJ), abscisic acid (ABA) or salicylic acid (SA), and their influence on pigment and fatty acid profiles was monitored. The application of GA3 (200 mg/l) stimulated the growth of P. tricornutum which accumulated 52% more dry biomass compared to the control and concomitantly returned the highest eicosapentaenoic acid (EPA) yield (0.6 mg/l). The highest fucoxanthin yield (0.18 mg/l) was obtained for P. tricornutum cultivated with GA3 (2 mg/l) supplementation. In Stauroneis sp., SA (1 mg/l) had the most positive effect on EPA, the content of which was enhanced up to 45.7 μg/mg (4.6% of total dry weight). The SA (1 mg/l) treatment also boosted carotenogenesis in Nitzschia sp., leading to 1.7- and 14-fold increases in fucoxanthin and β-carotene compared to the control, respectively. Of note, MJ (0.5 mg/l) increased the EPA content of all diatom species compared to their controls. These results indicate that phytohormone-based treatments can be used to alter the pigment and lipid content of microalgae, which tend to respond in dose- and species-specific manners to individual compounds.Key points• Response to phytohormones was investigated in diatoms from distinct families.• MJ (0.5 mg/l) caused an increase in EPA cellular content in all three diatoms.• Phytohormones mostly caused dose-dependent and species-specific responses.

Field test of water-net based wastewater treatment for nutrient removal and bioethanol production

In this study, an open pond constructed in Myanmar, a region with tropical climate and favorable environmental conditions for algae growth, was considered to conduct field experiments on sewage inflow river water. The nutrient removal efficiency and productivity of Hydrodictyon reticulatum (H. reticulatum) were analyzed, and the maximum fermentation limit concentration for bioethanol production was determined. Three ponds were operated in batch mode to investigate the effect of light intensity. Photoinhibition was caused due to excessive light intensity in summer season in the region with tropical climate resulting in reduced facility efficiency in the absence of shade. For light blocking, a transparent film was found to be more effective than a translucent film. In the transparent film shading facility, the nitrogen and phosphorus removal efficiencies were maintained above 76% and 81%, respectively, and the productivity of H. reticulatum was 2.27 g m^-2 d^-1. For a raceway open pond facility shaded with transparent film, the performance was evaluated based on hydraulic retention time (HRT), and the productivity of algae was found to increase with increasing supply of nitrogen and phosphorous. Maximum biomass production of 3.21 g m^-2 d^-1 was observed with an HRT of 3 d, suggesting the possibility of long-term operation. As a result of evaluating the ethanol production based on the initial concentration of H. reticulatum, the yield of bioethanol at the initial reducing sugar content of 120 g L^-1 was 89.4%, but bioethanol production was only 8.9 g L^-1.

Interplay between LHCSR proteins and state transitions governs the NPQ response in Chlamydomonas during light fluctuations

Photosynthetic organisms use sunlight as the primary energy source to fix CO₂ . However, in nature, light energy is highly variable, reaching levels of saturation for periods ranging from milliseconds to hours. In the green microalga Chlamydomonas reinhardtii, safe dissipation of excess light energy by nonphotochemical quenching (NPQ) is mediated by light-harvesting complex stress-related (LHCSR) proteins and redistribution of light-harvesting antennae between the photosystems (state transition). Although each component underlying NPQ has been documented, their relative contributions to NPQ under fluctuating light conditions remain unknown. Here, by monitoring NPQ in intact cells throughout high light/dark cycles of various illumination periods, we find that the dynamics of NPQ depend on the timescales of light fluctuations. We show that LHCSRs play a major role during the light phases of light fluctuations and describe their role in growth under rapid light fluctuations. We further reveal an activation of NPQ during the dark phases of all high light/dark cycles and show that this phenomenon arises from state transition. Finally, we show that LHCSRs and state transition synergistically cooperate to enable NPQ response during light fluctuations. These results highlight the dynamic functioning of photoprotection under light fluctuations and open a new way to systematically characterize the photosynthetic response to an ever-changing light environment.

Bioenergy, Biofuels, Lipids and Pigments—Research Trends in the Use of Microalgae Grown in Photobioreactors

This scientometric review and bibliometric analysis aimed to characterize trends in scientific research related to algae, photobioreactors and astaxanthin. Scientific articles published between 1995 and 2020 in the Web of Science and Scopus bibliographic databases were analyzed. The article presents the number of scientific articles in particular years and according to the publication type (e.g., articles, reviews and books). The most productive authors were selected in terms of the number of publications, the number of citations, the impact factor, affiliated research units and individual countries. Based on the number of keyword occurrences and a content analysis of 367 publications, seven leading areas of scientific interest (clusters) were identified: (1) techno-economic profitability of biofuels, bioenergy and pigment production in microalgae biorefineries, (2) the impact of the construction of photobioreactors and process parameters on the efficiency of microalgae cultivation, (3) strategies for increasing the amount of obtained lipids and obtaining biodiesel in Chlorella microalgae cultivation, (4) the production of astaxanthin on an industrial scale using Haematococcus microalgae, (5) the productivity of biomass and the use of alternative carbon sources in microalgae culture, (6) the effect of light and carbon dioxide conversion on biomass yield and (7) heterotrophy. Analysis revealed that topics closely related to bioenergy production and biofuels played a dominant role in scientific research. This publication indicates the directions and topics for future scientific research that should be carried out to successfully implement economically viable technology based on microalgae on an industrial scale.

Pilot-Scale Cultivation of the Snow Alga Chloromonas typhlos in a Photobioreactor

The most studied and cultivated microalgae have a temperature optimum between 20 and 35°C. This temperature range hampers sustainable microalgae growth in countries with colder periods. To overcome this problem, psychrotolerant microalgae, such as the snow alga Chloromonas typhlos, can be cultivated during these colder periods. However, most of the research work has been carried out in the laboratory. The step between laboratory-scale and large-scale cultivation is difficult, making pilot-scale tests crucial to gather more information. Here, we presented a successful pilot-scale growth test of C. typhlos. Seven batch mode growth periods were compared during two longer growth tests in a photobioreactor of 350 L. We demonstrated the potential of this alga to be cultivated at colder ambient temperatures. The tests were performed during winter and springtime to compare ambient temperature and sunlight influences. The growth and CO₂ usage were continuously monitored to calculate the productivity and CO₂ fixation efficiency. A maximum dry weight of 1.082 g L^-1 was achieved while a maximum growth rate and maximum daily volumetric and areal productivities of 0.105 d^-1, 0.110 g L^-1 d^-1, and 2.746 g m^-2 d^-1, respectively, were measured. Future tests to optimize the cultivation of C. typhlos and production of astaxanthin, for example, will be crucial to explore the potential of biomass production of C. typhlos on a commercial scale.

Microalgae-Based PUFAs for Food and Feed: Current Applications, Future Possibilities, and Constraints

Microalgae are currently considered an attractive source of highly valuable compounds for human and animal consumption, including polyunsaturated fatty acids (PUFAs). Several microalgae-derived compounds, such as ω-3 fatty acids, pigments, and whole dried biomasses are available on the market and are mainly produced by culturing microalgae in open ponds, which can be achieved with low setup and maintenance costs with respect to enclosed systems. However, open tanks are more susceptible to bacterial and other environmental contamination, do not guarantee a high reproducibility of algal biochemical profiles and productivities, and constrain massive cultivation to a limited number of species. Genetic engineering techniques have substantially improved over the last decade, and several model microalgae have been successfully modified to promote the accumulation of specific value-added compounds. However, transgenic strains should be cultured in closed photobioreactors (PBRs) to minimize risks of contamination of aquatic environments with allochthonous species; in addition, faster growth rates and higher yields of compounds of interest can be achieved in PBRs compared to open ponds. In this review, we present information collected about the major microalgae-derived commodities (with a special focus on PUFAs) produced at industrial scale, as well genetically-engineered microalgae to increase PUFA production. We also critically analyzed the main bottlenecks that make large-scale production of algal commodities difficult, as well as possible solutions to overcome the main problems and render the processes economically and environmentally safe.

Biogas Production and Biofertilizer Estimation from Anaerobic Co-Digestion of Blends of Wastewater and Microalgae

The study aimed to investigate the enhancement of biogas production through anaerobic digestion from blends of wastewater and microalgae. The microalgae functioned as a co-substrate. A series of laboratory-scale batch anaerobic co-digestion of the wastewater and microalgae were carried out under mesophilic conditions for 21 days. Biogas production rates from wastewater (WW) alone and different blends of WW and microalgae (MA) were analysed. In addition, the nutrient values and reduction in the volume of the WW after digestion were determined. The results show that the quantity and quality of biogas produced with different mix ratios of WW to MA (WW only, 3 : 1, and 3 : 2) were 24 mL CH4/g COD, 37 mL CH4/g COD, and 44 mL CH4/g COD, respectively. At the optimum mix ratio, the optimum methane produced was 44 mL CH4/g COD, which is much lower than volumes of gas STP conditions, which is 350 mL CH4/g COD. The values of TS, VS, and COD were also reduced by 43.11%, 40.09%, and 71.99% at the optimum mix ratio, respectively. The optimum mix ratio of 1732.77, 77.14, and 174.26 kg/year of urea, diammonium phosphate, and potash fertilizer, respectively, was obtained. The results indicate that biogas production can be improved through co-digestion of WW and MA as a co-substrate relatively, but to improve the production rate another substrate should be investigated. However, the result can be used as a supplementary investigation for practical application in energy production.

Microalgae-based bioplastics: Future solution towards mitigation of plastic wastes

Global demand for plastic materials has severely harm the environment and marine sea life. Therefore, bioplastics have emerged as an environmentally friendly alternative due to sustainability, minimal carbon footprint, less toxicity and high degradability. This review highlights the sustainable and environmentally friendly approach towards bioplastic production by utilizing microalgae as a feed source in several ways. First, the microalgae biomass obtained through the biorefinery approach can be processed into PHA under certain nutrient limitations. Additionally, microalgae biomass can act as potential filler and reinforcement towards the enhancement of bioplastic either blending with conventional bioplastic or synthetic polymer. The downstream processing of microalgae via suitable extraction and pre-treatment of bioactive compounds such as lipids and cellulose are found to be promising for the production of bioplastics. Moving on, the intermediate processing of bioplastic via lactic acid synthesized from microalgae has favoured the microwave-assisted synthesis of polylactic acid due to cost efficiency, minimum solvent usage, low energy consumption, and fast rate of reaction. Moreover, the reliability and effectiveness of microalgae-based bioplastics are further evaluated in terms of techno-economic analysis and degradation mechanism. Future improvement and recommendations are listed towards proper genetic modification of algae strains, large-scale biofilm technology, low-cost cultivation medium, and novel avocado seed-microalgae bioplastic blend.

Recent biotechnological developments in reshaping the microalgal genome: A signal for green recovery in biorefinery practices

The use of renewable energy sources as a substitute for nonrenewable fossil fuels is urgently required. Algae biorefinery platform provides an excellent alternate to overcome future energy problems. However, to let this viable biomass be competent with existing feedstocks, it is necessary to exploit genetic manipulation and improvement in upstream and downstream platforms for optimal bio-product recovery. Furthermore, the techno-economic strategies further maximize metabolites production for biofuel, biohydrogen, and other industrial applications. The experimental methodologies in algal photobioreactor promote high biomass production, enriched in lipid and starch content in limited environmental conditions. This review presents an optimization framework combining genetic manipulation methods to simulate microalgal growth dynamics, understand the complexity of algal biorefinery to scale up, and identify green strategies for techno-economic feasibility of algae for biomass conversion. Overall, the algal biorefinery opens up new possibilities for the valorization of algae biomass and the synthesis of various novel products.

Harnessing the Algal Chloroplast for Heterologous Protein Production

Photosynthetic microbes are gaining increasing attention as heterologous hosts for the light-driven, low-cost production of high-value recombinant proteins. Recent advances in the manipulation of unicellular algal genomes offer the opportunity to establish engineered strains as safe and viable alternatives to conventional heterotrophic expression systems, including for their use in the feed, food, and biopharmaceutical industries. Due to the relatively small size of their genomes, algal chloroplasts are excellent targets for synthetic biology approaches, and are convenient subcellular sites for the compartmentalized accumulation and storage of products. Different classes of recombinant proteins, including enzymes and peptides with therapeutical applications, have been successfully expressed in the plastid of the model organism Chlamydomonas reinhardtii, and of a few other species, highlighting the emerging potential of transplastomic algal biotechnology. In this review, we provide a unified view on the state-of-the-art tools that are available to introduce protein-encoding transgenes in microalgal plastids, and discuss the main (bio)technological bottlenecks that still need to be addressed to develop robust and sustainable green cell biofactories.

Microalgal-based removal of contaminants of emerging concern

The presence of contaminants of emerging concern (CECs) in the environment has been recognized as a worldwide concern. In particular, water pollution by CECs is becoming a major global problem, which requires ongoing evaluation of water resources policies at all levels and the use of effective and innovative wastewaters treatment processes for their removal. Microalgae have been increasingly recognized as relevant for wastewater polishing, including CECs removal. These microorganisms are commonly cultivated in suspension. However, the use of planktonic microalgae for wastewater treatment has limitations in terms of microbiological contamination, process effectiveness and sustainability. The use of consortia of microalgae and bacteria represents a significant advance for sustainable wastewater polishing, particularly when the microorganisms are associated as biofilms. These immobilized mixed cultures can overcome the limitations of suspended-microalgae systems and improve the performance of the involved species for CECs removal. In addition, microalgae-bacteria based systems can offer a relevant combined effect for CECs removal and biomass production enhancement. This study reviews the advantages and advances on the use of microalgae for wastewater treatment, highlighting the potential on the use of microalgae-bacteria biofilms for CECs removal and the further biomass valorisation for third-generation biofuel production.

Biological Approaches Integrating Algae and Bacteria for the Degradation of Wastewater Contaminants-A Review

The traditional approach for biodegradation of organic matter in sewage treatment used a consortium of bacterial spp. that produce untreated or partially treated inorganic contaminants resulting in large amounts of poor-quality sludge. The aeration process of activated sludge treatment requires high energy. So, a sustainable technique for sewage treatment that could produce less amount of sludge and less energy demanding is required for various developed and developing countries. This led to research into using microalgae for wastewater treatment as they reduce concentrations of nutrients like inorganic nitrates and phosphates from the sewage water, hence reducing the associated chemical oxygen demand (COD). The presence of microalgae removes nutrient concentration in water resulting in reduction of chemical oxygen demand (COD) and toxic heavy metals like Al, Ni, and Cu. Their growth also offers opportunity to produce biofuels and bioproducts from algal biomass. To optimize use of microalgae, technologies like high-rate algal ponds (HRAPs) have been developed, that typically use 22% of the electricity used in Sequencing Batch Reactors for activated sludge treatment with added economic and environmental benefits like reduced comparative operation cost per cubic meter, mitigate global warming, and eutrophication potentials. The addition of suitable bacterial species may further enhance the treatment potential in the wastewater medium as the inorganic nutrients are assimilated into the algal biomass, while the organic nutrients are utilized by bacteria. Further, the mutual exchange of CO2 and O2 between the algae and the bacteria helps in enhancing the photosynthetic activity of algae and oxidation by bacteria leading to a higher overall nutrient removal efficiency. Even negative interactions between algae and bacteria mediated by various secondary metabolites (phycotoxins) have proven beneficial as it controls the algal bloom in the eutrophic water bodies. Herein, we attempt to review various opportunities and limitations of using a combination of microalgae and bacteria in wastewater treatment method toward cost effective, eco-friendly, and sustainable method of sewage treatment.

The effects of microalgae-based fertilization of wheat on yield, soil microbiome and nitrogen oxides emissions

Overuse of agrochemicals is linked to nutrient loss, greenhouse gases (GHG) emissions, and resource depletion thus requiring the development of sustainable agricultural solutions. Cultivated microalgal biomass could provide such a solution. The environmental consequences of algal biomass application in agriculture and more specifically its effect on soil GHG emissions are understudied. Here we report the results of a field experiment of wheat grown on three different soil types under the same climatic conditions and fertilized by urea or the untreated biomass of fresh-water green microalga (Coelastrella sp.). The results show that neither soil type nor fertilization types impacted the aboveground wheat biomass, whereas, soil microbiomes differed in accordance with soil but not the fertilizer type. However, wheat grain nitrogen (N) content and soil N oxides emissions were significantly lower in plots fertilized by algal biomass compared to urea. Grain N content in the wheat grain that was fertilized by algal biomass was between 1.3%-1.5% vs. 1.6%-2.0% in the urea fertilized wheat. Cumulative soil nitric oxide (NO) emissions were 2-5 fold lower, 313-726 g N ha^-1 season^-1 vs. 909-3079 g N ha^-1 season^-1. Cumulative soil nitrous oxide (N₂O) emissions were 2-fold lower, 90-348 g N ha^-1 season^-1 vs. 147-761 g N ha^-1 season^-1. The lower emissions resulted in a 4-11 fold lower global warming impact of the algal fertilized crops. This calculation excluded the CO₂ cost from the algae biomass production. Once included algal fertilization had a similar, or 40% higher, climatic impact compared to the urea fertilization.

Here comes the sun: How optimization of photosynthetic light reactions can boost crop yields

Photosynthesis started to evolve some 3.5 billion years ago CO₂ is the substrate for photosynthesis and in the past 200-250 years, atmospheric levels have approximately doubled due to human industrial activities. However, this time span is not sufficient for adaptation mechanisms of photosynthesis to be evolutionarily manifested. Steep increases in human population, shortage of arable land and food, and climate change call for actions, now. Thanks to substantial research efforts and advances in the last century, basic knowledge of photosynthetic and primary metabolic processes can now be translated into strategies to optimize photosynthesis to its full potential in order to improve crop yields and food supply for the future. Many different approaches have been proposed in recent years, some of which have already proven successful in different crop species. Here, we summarize recent advances on modifications of the complex network of photosynthetic light reactions. These are the starting point of all biomass production and supply the energy equivalents necessary for downstream processes as well as the oxygen we breathe.

Identification and characterization of the novel bioactive compounds from microalgae and cyanobacteria for pharmaceutical and nutraceutical applications

Microalgae and cyanobacteria (blue-green algae) are used as food by humans. They have gained a lot of attention in recent years because of their potential applications in biotechnology. Microalgae and cyanobacteria are good sources of many valuable compounds, including important biologically active compounds with antiviral, antibacterial, antifungal, and anticancer activities. Under optimal growth condition and stress factors, algal biomass produce varieties of potential bioactive compounds. In the current review, bioactive compounds production and their remarkable applications such as pharmaceutical and nutraceutical applications along with processes involved in identification and characterization of the novel bioactive compounds are discussed. Comprehensive knowledge about the exploration, extraction, screening, and trading of bioactive products from microalgae and cyanobacteria and their pharmaceutical and other applications will open up new avenues for drug discovery and bioprospecting.

Cyanobacteria: A Natural Source for Controlling Agricultural Plant Diseases Caused by Fungi and Oomycetes and Improving Plant Growth

Cyanobacteria, also called blue-green algae, are a group of prokaryotic microorganisms largely distributed in both terrestrial and aquatic environments. They produce a wide range of bioactive compounds that are mostly used in cosmetics, animal feed and human food, nutraceutical and pharmaceutical industries, and the production of biofuels. Nowadays, the research concerning the use of cyanobacteria in agriculture has pointed out their potential as biofertilizers and as a source of bioactive compounds, such as phycobiliproteins, for plant pathogen control and as inducers of plant systemic resistance. The use of alternative products in place of synthetic ones for plant disease control is also encouraged by European Directive 2009/128/EC. The present up-to-date review gives an overall view of the recent results on the use of cyanobacteria for both their bioprotective effect against fungal and oomycete phytopathogens and their plant biostimulant properties. We highlight the need for considering several factors for a proper and sustainable management of agricultural crops, ranging from the mechanisms by which cyanobacteria reduce plant diseases and modulate plant resistance to the enhancement of plant growth.