Rewiring glycerol metabolism for enhanced production of poly-γ-glutamic acid in Bacillus licheniformis

Transcriptomic analysis of Bacillus licheniformis 2709 reveals the molecular mechanism of alkaline protease biosynthesis regulated by the DegS/DegU two-component system

The DegS/DegU two-component signal transduction system (TCS), plays significant roles in a broad range of bacterial responses to the complicated environment in Bacillus subtilis. However, few efforts have been made to explore the physiological functions of DegS/DegU in alkaline protease (AprE) biosynthesis in the industrial strain Bacillus licheniformis 2709. In this study, it was found that the biosynthesis of AprE is severely hampered in degS and degU deficient mutants compared with the original strain. To investigate the underlying mechanisms responsible for changing the AprE productivity, transcriptome profile analysis was conducted to compare the differentially expressed genes (DEGs) among the deficient mutants and the control. At the peak of AprE production in degS mutant, a total of 810 DEGs including 125 up-regulated and 685 down-regulated were identified compared to the control, which were mainly annotated in 15 pathways, including oxidative phosphorylation, amino acid metabolism and ABC transporters. Besides, the transcriptomic analysis of degU mutant revealed that 307 genes were significantly up-regulated and 604 genes were down-regulated, among which, rho was identified and further functionally verified. Systematic comparison of DEGs under different conditions elucidated self-repression mechanism of DegU on aprE expression in B. licheniformis 2709, which was confirmed by the inducible expression of degU::gfp in this study. The study will yield valuable insight into how the DegS/DegU TCS regulates aprE expression in industrial strain with respect to protease production, and facilitates genetic strain improvement aiming at biological containment and effectiveness of biotechnological processes.

A Convenient and Highly Efficient Strategy for Esterification of Poly (γ-Glutamic Acid) with Alkyl Halides at Room Temperature

The presented work discusses the highly efficient esterification of poly (γ-glutamic acid) (γ-PGA) with alkyl halides at room temperature. The esterification reaction was completed within 3 h, and the prepared γ-PGA esters were obtained with excellent yields (98.6%) when 1,1,3,3-tetramethylguanidine (TMG) was used as a promoter. The influence of the amount of TMG, solvent, reaction conditions, and alkyl halides on the esterification reaction was examined. It was found that polar aprotic solvents, such as N-Methylpyrrolidone (NMP) and 1,3-Dimethyl-2-imidazolidinone (DMI), were favorable for the esterification. Non-polar or weakly polar solvents (i.e., dichloroethane, acetonitrile) were not favorable for the esterification. Water as a solvent had a negative effect on esterification. The reactivity of bromine halogenated compounds was higher than that of chlorine halogenated compounds but lower than that of iodine halogenated compounds. The structures of the prepared γ-PGA ester were confirmed by 1H NMR and FT-IR spectroscopy. Thermal stability and hydrophobic properties of the resulting product were tested. The results showed that the prepared γ-PGA propyl ester had high thermal stability (up to 267 °C) and showed good hydrophobicity (contact angle 118.7°).

Engineering Bacillus licheniformis as industrial chassis for efficient bioproduction from starch

Starch is an attractive feedstock in biorefinery processes, while the low natural conversion rate of most microorganisms limits its applications. Herein, starch metabolic pathway was systematically investigated using Bacillus licheniformis DW2 as the host organism. Initially, the effects of overexpressing amylolytic enzymes on starch hydrolysis were evaluated. Subsequently, the transmembrane transport system and intracellular degradation module were modified to accelerate the uptake of hydrolysates and their further conversion to glucose-6-phosphate. The DW2-derived strains exhibited robust growth in starch medium, and productivity of bacitracin and subtilisin were improved by 38.5% and 32.6%, with an 32.3% and 22.9% increase of starch conversion rate, respectively. Lastly, the employment of engineering strategies enabled another B. licheniformis WX-02 to produce poly-γ-glutamic acid from starch with a 2.1-fold increase of starch conversion rate. This study not only provided excellent B. licheniformis chassis for sustainable bioproduction from starch, but shed light on researches of substrate utilization.

High-level production of poly-γ-glutamic acid by a newly isolated Bacillus sp. YJY-8 and potential use in increasing the production of tomato

Strain YJY-8, a new γ-polyglutamic acid producer, was separated from fermented soybean paste samples. The strain was identified as a genus of Bacillus by morphological and 16S rDNA sequence analysis and was named Bacillus sp. YJY-8. The optimal medium composition and cultural conditions were studied using a single-factor experiment and a response surface experiment. The optimized medium consisted of monosodium glutamate 70 g/L, glucose 54.3 g/L, glycerol 31.8 g/L, ammonium sulfate 11.1 g/L, yeast extract 3.2 g/L, tryptone 1.5 g/L, L-glutamic acid 6.8 g/L, MgSO4 7H2O 0.5 g/L, FeCl3 6H2O 0.02 g/L, KH2PO4 0.9 g/L, CaCl2 0.03 g/L, MnSO4 H2O 0.3 g/L, ammonium molybdate 0.02 g/L, pH 7.0. The optimal cultivation conditions were 35 °C and pH 7.0. Under the optimized conditions, after 48 hr of cultivation, the highest shaking flask fermentation level of γ-PGA reached 65.2 ± 0.36 g/L. In addition, through fed-batch fermentation in 30 L fermenters, the fermentation level of γ-PGA reached its highest level at 88.42 g/L and productivity was 1.23 g/(L hr) after 72 hr. Then, the effect of γ-PGA on tomato yield was investigated. At the seedling stage, the plant height and stem diameter of γ-PGA treated plants increased by 5.69 and 15.735% after spraying γ-PGA for 19 days. During the flowering and fruiting period, the stem diameter of the γ-PGA treatment group increased by 6.74%, with a maximum increase of 11.65%. The number of fruit branches increased by 0.56-16.29% and the number of fruit sets increased by 1.01-28.47%. At the fruit maturation stage, the yield of tomatoes increased by 10.51, 14.27, and 5.83%.

Regulator DegU can remarkably influence alkaline protease AprE biosynthesis in Bacillus licheniformis 2709

Alkaline protease AprE, produced by Bacillus licheniformis 2709 is an important edible hydrolase, which has potential applications in nutrient acquisition and medicine. The expression of AprE is finely regulated by a complex transcriptional regulation system. However, there is little study on transcriptional regulation mechanism of AprE biosynthesis in Bacillus licheniformis, which limits system engineering and further enhancement of AprE. Here, the severely depressed expression of aprE in degU and degS deletion mutants illustrated that the regulator DegU and its phosphorylation played a crucial part in AprE biosynthesis. Further electrophoretic mobility shift assay (EMSA) in vitro indicated that phosphorylated DegU can directly bind to the regulatory region though the DNase I foot-printing experiments failed to observe protected region. The plasmid-mediated overexpression of degU32 (Hy) obviously improved the yield of AprE by 41.6 % compared with the control strain, which demonstrated the importance of phosphorylation state of DegU on the transcription of aprE in vivo. In this study, the putative binding sequence of aprE (5'-TAAAT……AAAAT…….AACAT…TAAAA-3') located upstream -91 to -87 bp, -101 to -97 bp, -195 to -191 bp, -215 to -211 bp of the transcription start site (TSS) in B. licheniformis was computationally identified based on the DNA-binding sites of DegU in Bacillus subtilis. Overall, we systematically investigated the influence of the interplay between phosphorylated DegU and its cognate DNA sequence on expression of aprE, which not only contributes to the further AprE high-production in a genetically modified host in the future, but also significantly increases our understanding of the aprE transcription mechanism.

Poly (γ) glutamic acid: a unique microbial biopolymer with diverse commercial applicability

Microbial biopolymers have emerged as promising solutions for environmental pollution-related human health issues. Poly-γ-glutamic acid (γ-PGA), a natural anionic polymeric compound, is composed of highly viscous homo-polyamide of D and L-glutamic acid units. The extracellular water solubility of PGA biopolymer facilitates its complete biodegradation and makes it safe for humans. The unique properties have enabled its applications in healthcare, pharmaceuticals, water treatment, foods, and other domains. It is applied as a thickener, taste-masking agent, stabilizer, texture modifier, moisturizer, bitterness-reducing agent, probiotics cryoprotectant, and protein crystallization agent in food industries. γ-PGA is employed as a biological adhesive, drug carrier, and non-viral vector for safe gene delivery in tissue engineering, pharmaceuticals, and medicine. It is also used as a moisturizer to improve the quality of hair care and skincare cosmetic products. In agriculture, it serves as an ideal stabilizer, environment-friendly fertilizer synergist, plant-growth promoter, metal biosorbent in soil washing, and animal feed additive to reduce body fat and enhance egg-shell strength.

Development of an Inosine Hyperproducer from Bacillus licheniformis by Systems Metabolic Engineering

Inosine is widely used in food, chemical, and medicine. This study developed Bacillus licheniformis into an inosine hyperproducer through systems metabolic engineering. First, purine metabolism was activated by deleting inhibitors PurR and YabJ and overexpressing the pur operon. Then, the 5-phosphoribosyl-1-pyrophosphate (PRPP) supply was increased by optimizing the glucose transport system and pentose phosphate pathway, increasing the inosine titer by 97% and decreasing the titers of byproducts by 36%. Next, to prevent the degradation of inosine, genes deoD and pupG coding purine nucleoside phosphorylase were deleted, accumulating 0.91 g/L inosine in the culture medium. Additionally, the downregulation of adenosine 5'-monophosphate (AMP) synthesis pathway increased the inosine titer by 409%. Importantly, enhancing the glycine and aspartate supply increased the inosine titer by 298%. Finally, the guanosine synthesis pathway was blocked, leading to strain IR-8-2 producing 27.41 g/L inosine with a 0.46 g inosine/g glucose yield and a 0.38 g/(L·h) productivity in a shake flask.

Engineering of a newly isolated Bacillus tequilensis BL01 for poly-γ-glutamic acid production from citric acid

BACKGROUND

Poly γ-glutamic acid (γ-PGA) is a promising biopolymer for various applications. For glutamic acid-independent strains, the titer of γ-PGA is too low to meet the industrial demand. In this study, we isolated a novel γ-PGA-producing strain, Bacillus tequilensis BL01, and multiple genetic engineering strategies were implemented to improve γ-PGA production.

RESULTS

First, the one-factor-at-a-time method was used to investigate the influence of carbon and nitrogen sources and temperature on γ-PGA production. The optimal sources of carbon and nitrogen were sucrose and (NH₄)₂SO₄ at 37 °C, respectively. Second, the sucA, gudB, pgdS, and ggt genes were knocked out simultaneously, which increased the titer of γ-PGA by 1.75 times. Then, the titer of γ-PGA increased to 18.0 ± 0.3 g/L by co-overexpression of the citZ and pyk genes in the mutant strain. Furthermore, the γ-PGA titer reached 25.3 ± 0.8 g/L with a productivity of 0.84 g/L/h and a yield of 1.50 g of γ-PGA/g of citric acid in fed-batch fermentation. It should be noted that this study enables the synthesis of low (1.84 × 10⁵ Da) and high (2.06 × 10⁶ Da) molecular weight of γ-PGA by BL01 and the engineering strain.

CONCLUSION

The application of recently published strategies to successfully improve γ-PGA production for the new strain B. tequilensis BL01 is reported. The titer of γ-PGA increased 2.17-fold and 1.32-fold compared with that of the wild type strain in the flask and 5 L fermenter. The strain shows excellent promise as a γ-PGA producer compared with previous studies. Meanwhile, different molecular weights of γ-PGA were obtained, enhancing the scope of application in industry.

Systematic engineering of Bacillus amyloliquefaciens for efficient production of poly-γ-glutamic acid from crude glycerol

Microbial production of poly-γ-glutamic acid (γ-PGA) from non-food raw materials is a promising alternative to food feedstocks-based biosynthesis. A superior cell factory of Bacillus amyloliquefaciens for the efficient synthesis of γ-PGA from crude glycerol was constructed through systematic metabolic engineering. Firstly, some phase-dependent promoters were screened from B. amyloliquefaciens, which can be used for fine regulation of subsequent metabolic pathways. Secondly, the glycerol utilization pathway and the γ-PGA synthesis pathway were co-optimized utilizing the above-screened promoters, which increased the titer of γ-PGA by 1.75-fold. Then, the titer of γ-PGA increased to 15.6 g/L by engineering transcription factors degU and blocking competitive pathways. Finally, combining these strategies with an optimized fermentation process, 26.4 g/L γ-PGA was obtained from crude glycerol as a single carbon source (a 3.72-fold improvement over the initial strain). Overall, these strategies will have great potential for synthesizing other products from crude glycerol in B. amyloliquefaciens.

Recent Advances in Microbial Synthesis of Poly-γ-Glutamic Acid: A Review

Poly-γ-glutamic acid (γ-PGA) is a natural, safe, non-immunogenic, biodegradable, and environmentally friendly glutamic biopolymer. γ-PGA has been regarded as a promising bio-based materials in the food field, medical field, even in environmental engineering field, and other industrial fields. Microbial synthesis is an economical and effective way to synthesize γ-PGA. Bacillus species are the most widely studied producing strains. γ-PGA biosynthesis involves metabolic pathway of racemization, polymerization, transfer, and catabolism. Although microbial synthesis of γ-PGA has already been used extensively, productivity and yield remain the major constraints for its industrial application. Metabolic regulation is an attempt to solve the above bottleneck problems and meet the demands of commercialization. Therefore, it is important to understand critical factors that influence γ-PGA microbial synthesis in depth. This review focuses on production strains, biosynthetic pathway, and metabolic regulation. Moreover, it systematically summarizes the functional properties, purification procedure, and industrial application of γ-PGA.

Enhanced production of poly-γ-glutamic acid via optimizing the expression cassette of Vitreoscilla hemoglobin in Bacillus licheniformis

Poly-γ-glutamic acid (γ-PGA) is a natural polymer with various applications, and its high-viscosity hinders oxygen transmission and improvement of synthesis level. Vitreoscilla hemoglobin (VHB) has been introduced into various hosts as oxygen carrier, however, its expression strength and contact efficiency with oxygen hindered efficient oxygen transfer and metabolite synthesis. Here, we want to optimize the expression cassette of VHB for γ-PGA production. Firstly, our results implied that γ-PGA yields were enhanced when introducing twin-arginine translocation (Tat) signal peptides (SP_YwbN, SP_PhoD and SP_TorA) into VHB expression cassette, and the best performance was attained by SP_YwbN from Bacillus subtilis, the γ-PGA yield of which was 18.53% higher than that of control strain, and intracellular ATP content and oxygen transfer coefficient (K_La) were increased by 29.71% and 73.12%, respectively, indicating that VHB mediated by SP_YwbN benefited oxygen transfer and ATP generation for γ-PGA synthesis. Furthermore, four promoters were screened, and P_vgb was proven as the more suitable promoter for VHB expression and γ-PGA synthesis, and γ-PGA yield of attaining strain WX/pPvgb-YwbN-Vgb was further increased to 40.59 g/L by 10.18%. Finally, WX/pPvgb-YwbN-Vgb was cultivated in 3 L fermentor for fed-batch fermentation, and 46.39 g/L γ-PGA was attained by glucose feeding, increased by 49.26% compared with the initial yield (31.01 g/L). Taken together, this study has attained an efficient VHB expression cassette for oxygen transfer and γ-PGA synthesis, which could also be applied in the production of other metabolites.

Multilevel metabolic engineering of Bacillus licheniformis for de novo biosynthesis of 2-phenylethanol

Due to its pleasant rose-like scent, 2-phenylethanol (2-PE) has been widely used in the fields of cosmetics and food. Microbial production of 2-PE offers a natural and sustainable production process. However, the current bioprocesses for de novo production of 2-PE suffer from low titer, yield, and productivity. In this work, a multilevel metabolic engineering strategy was employed for the high-level production of 2-PE. Firstly, the native alcohol dehydrogenase YugJ was identified and characterized for 2-PE production via genome mining and gene function analysis. Subsequently, the redirection of carbon flux into 2-PE biosynthesis by combining optimization of Ehrlich pathway, central metabolic pathway, and phenylpyruvate pathway enabled the production of 2-PE to a titer of 1.81 g/L. Specifically, AroK and AroD were identified as the rate-limiting enzymes of 2-PE production through transcription and metabolite analyses, and overexpression of aroK and aroD efficiently boosted 2-PE synthesis. The precursor competing pathways were blocked by eliminating byproduct formation pathways and modulating the glucose transport system. Under the optimal condition, the engineered strain PE23 produced 6.24 g/L of 2-PE with a yield and productivity of 0.14 g/g glucose and 0.13 g/L/h, respectively, using a complex medium in shake flasks. This work achieves the highest titer, yield, and productivity of 2-PE from glucose via the phenylpyruvate pathway. This study provides a promising platform that might be widely useful for improving the production of aromatic-derived chemicals.

Sustainable biosynthesis of chemicals from methane and glycerol via reconstruction of multi-carbon utilizing pathway in obligate methanotrophic bacteria

Obligate methanotrophic bacteria can utilize methane, an inexpensive carbon feedstock, as a sole energy and carbon substrate, thus are considered as the only nature-provided biocatalyst for sustainable biomanufacturing of fuels and chemicals from methane. To address the limitation of native C1 metabolism of obligate type I methanotrophs, we proposed a novel platform strain that can utilize methane and multi-carbon substrates, such as glycerol, simultaneously to boost growth rates and chemical production in Methylotuvimicrobium alcaliphilum 20Z. To demonstrate the uses of this concept, we reconstructed a 2,3-butanediol biosynthetic pathway and achieved a fourfold higher titer of 2,3-butanediol production by co-utilizing methane and glycerol compared with that of methanotrophic growth. In addition, we reported the creation of a methanotrophic biocatalyst for one-step bioconversion of methane to methanol in which glycerol was used for cell growth, and methane was mainly used for methanol production. After the deletion of genes encoding methanol dehydrogenase (MDH), 11.6 mM methanol was obtained after 72 h using living cells in the absence of any chemical inhibitors of MDH and exogenous NADH source. A further improvement of this bioconversion was attained by using resting cells with a significantly increased titre of 76 mM methanol after 3.5 h with the supply of 40 mM formate. The work presented here provides a novel framework for a variety of approaches in methane-based biomanufacturing.

Metabolic Engineering of Central Carbon Metabolism of Bacillus licheniformis for Enhanced Production of Poly-γ-glutamic Acid

Poly-γ-glutamic acid (γ-PGA) is an anionic polymer with wide-ranging applications in the areas of medicine, light chemical industry, wastewater treatment, and agriculture. However, the production cost of γ-PGA is high for the requirement of adding the expensive precursor L-glutamic acid during fermentation, which hinders its widespread application. In this study, in order to improve γ-PGA yield, central carbon metabolism was engineered to enhance the carbon flux of tricarboxylic acid (TCA) cycle and glutamic acid synthesis in a γ-PGA production strain Bacillus licheniformis WX-02. Firstly, pyruvate dehydrogenase (PdhABCD) and citrate synthase (CitA) were overexpressed to strengthen the flux of pyruvate into TCA cycle, resulting in 34.93% and 11.14% increase of γ-PGA yield in B. licheniformis WX-02, respectively. Secondly, the carbon flux to glyoxylate shunt was rewired via varying the expression of isocitrate lyase (AceA), and a 23.24% increase of γ-PGA yield was obtained in AceA down-regulated strain WXP_bacAaceBA. Thirdly, deletion of pyruvate formate-lyase gene pflB led to a 30.70% increase of γ-PGA yield. Finally, combinatorial metabolic engineering was applied, and γ-PGA titer was enhanced to 12.02 g/L via overexpressing pdhABCD and citA, repressing aceA, and deleting pflB, with a 69.30% improvement compared to WX-02. Collectively, metabolic engineering of central carbon metabolism is an effective strategy for enhanced γ-PGA production in B. licheniformis, and this research provided a promising strain for industrial production of γ-PGA.

Microbial physiological engineering increases the efficiency of microbial cell factories

Microbial cell factories provide vital platforms for the production of chemicals. Advanced biotechnological toolboxes have been developed to enhance their efficiency. However, these tools have limitations in improving physiological functions, and therefore boosting the efficiency (e.g. titer, rate, and yield) of microbial cell factories remains a challenge. In this review, we propose a strategy of microbial physiological engineering (MPE) to improve the efficiency of microbial cell factories. This strategy integrates tools from synthetic and systems biology to characterize and regulate physiological functions during chemical synthesis. MPE strategies mainly focus on the efficiency of substrate utilization, growth performance, stress tolerance, and the product export capacity of cell factories. In short, this review provides a new framework for resolving the bottlenecks that currently exist in low-efficiency cell factories.

Engineering Expression Cassette of pgdS for Efficient Production of Poly-γ-Glutamic Acids With Specific Molecular Weights in Bacillus licheniformis

Poly-γ-glutamic acid (γ-PGA) is an emerging biopolymer with various applications and γ-PGAs with different molecular weights exhibit distinctive properties. However, studies on the controllable molecular weights of biopolymers are limited. The purpose of this study is to achieve production of γ-PGAs with a wide range of molecular weights through manipulating the expression of γ-PGA depolymerase (PgdS) in Bacillus licheniformis WX-02. Firstly, the expression and secretion of PgdS were regulated through engineering its expression elements (four promoters and eight signal peptides), which generated γ-PGAs with molecular weights ranging from 6.82 × 10⁴ to 1.78 × 10⁶ Da. Subsequently, through combination of promoters with signal peptides, the production of γ-PGAs with a specific molecular weight could be efficiently obtained. Interestingly, the γ-PGA yield increased with the reduced molecular weight in flask cultures (Pearson correlation coefficient of −0.968, P < 0.01). Finally, in batch fermentation, the highest yield of γ-PGA with a weight-average molecular weight of 7.80 × 10⁴ Da reached 39.13 g/L under glutamate-free medium. Collectively, we developed an efficient strategy for one-step production of γ-PGAs with specific molecular weights, which have potential application for industrial production of desirable γ-PGAs.

Systematic engineering of branch chain amino acid supply modules for the enhanced production of bacitracin from Bacillus licheniformis

Bacitracin is a broad-spectrum cyclic peptide antibiotic mainly produced by Bacillus, precursor amino acid supply served as the critical role during its synthesis. In this study, we systematically engineered branch-chain amino acid (BCAA) supply modules for bacitracin production. Firstly, we demonstrated that Ile and Leu acted as limiting precursors for bacitracin synthesis, and that BCAA synthetic pathways were strengthened via simultaneous overexpression of, feedback-resistance acetolactate synthase IlvBN^fbr, 2-isopropylmalate synthetase LeuA^fbr and BCAA aminotransferase YbgE. Using this approach, bacitracin yield from strain DW-BCAA2 was 892.54 U/mL, an increase of 18.32% compared with that DW2 (754.32 U/mL). Secondly, the BCAA permeases, YvbW and BraB, which have higher affinities for Leu and Ile transportation, respectively, were both identified as BCAA importers, with their overexpression improving intracellular BCAA accumulations and bacitracin yields. Finally, the leucine-responsive family regulator, lrpC was deleted to generate the final strain DW-BCAA6, with intracellular concentrations of Ile, Leu and Val increased by 2.26-, 1.90- and 0.72-fold, respectively. The bacitracin yield from DW-BCAA6 was 1029.83 U/mL, an increase of 36.52%, and is the highest bacitracin yield reported. Equally, concentrations of other byproducts including acetic acid, acetoin and 2,3-butanediol were all reduced. Taken together, we devised an efficient strategy for the enhanced production of bacitracin, and a promising B. licheniformis DW-BCAA6 strain was constructed for industrial production of bacitracin.

•

Enhancing intracellular BCAA accumulations benefited bacitracin synthesis.

•

YvbW and BraB were both identified as BCAA importers in B. licheniformis.

•

Deleting lrp increased brnQ transcription and intracellular BCAA concentrations.

•

Bacitracin yield produced by DW-BCAA6 was the highest currently reported.

Isolation of a novel poly-γ-glutamic acid-producing Bacillus licheniformis A14 strain and optimization of fermentation conditions for high-level production

In the present study, bacteria producing poly-γ-glutamic acid were isolated from marine sands, and an efficient producer identified. γ-PGA was rapidly screened by thin-layer chromatography and UV spectrophotometer assay. Media optimization was carried out, and for the cost-effective production of γ-PGA, monosodium glutamate was used as the substrate for the synthesis of γ-PGA instead of glutamic acid. Lastly, Plackett-Buman design (PB) and Response surface methodology (RSM) were used to determine significant media components and their interaction effect to achieve maximum γ-PGA production. With this integrated method, a bacterial strain with a high yield of γ-PGA was obtained rapidly, and the production was increased up to 37.8 g/L after optimization.

Enhanced production of heterologous proteins via engineering the cell surface of Bacillus licheniformis

Cell surface engineering was proven as the efficient strategy for enhanced production of target metabolites. In this study, we want to improve the yield of target protein by engineering cell surface in Bacillus licheniformis. First, our results confirmed that deletions of d-alanyl-lipoteichoic acid synthetase gene dltD, cardiolipin synthase gene clsA and CDP-diacylglycerol-serine O-phosphatidyltransferase gene pssA were not conducive to cell growth, and the biomass of gene deletion strains were, respectively, decreased by 10.54 ± 1.43%, 14.17 ± 1.51%, and 17.55 ± 1.28%, while the concentrations of total extracellular proteins were improved, due to the increases of cell surface net negative charge and cell membrane permeability. In addition, the activities of target proteins, nattokinase, and α-amylase were also improved significantly in gene deletion strains. Furthermore, the triplicate gene (dltD, clsA, and pssA) deletion strain was constructed, which further led to the 45.71 ± 2.43% increase of cell surface net negative charge and 26.45 ± 2.31% increase of cell membrane permeability, and the activities of nattokinase and α-amylase reached 37.15 ± 0.89 FU/mL and 305.3 ± 8.4 U/mL, increased by 46.09 ± 3.51% and 96.34 ± 7.24%, respectively. Taken together, our results confirmed that cell surface engineering via deleting dltD, clsA, and pssA is an efficient strategy for enhanced production of target proteins, and this research provided a promising host strain of B. licheniformis for efficient protein expression.

Establishment and application of multiplexed CRISPR interference system in Bacillus licheniformis

Bacillus licheniformis has been regarded as an outstanding microbial cell factory for the production of biochemicals and enzymes. Due to lack of genetic tools to repress gene expression, metabolic engineering and gene function elucidation are limited in this microbe. In this study, an integrated CRISPR interference (CRISPRi) system was constructed in B. licheniformis. Several endogenous genes, including yvmC, cypX, alsD, pta, ldh, and essential gene rpsC, were severed as the targets to test this CRISPRi system, and the repression efficiencies were ranged from 45.02 to 94.00%. Moreover, the multiple genes were simultaneously repressed with high efficiency using this CRISPRi system. As a case study, the genes involved in by-product synthetic and L-valine degradation pathways were selected as the silence targets to redivert metabolic flux toward L-valine synthesis. Repression of acetolactate decarboxylase (alsD) and leucine dehydrogenase (bcd) led to 90.48% and 80.09 % increases in L-valine titer, respectively. Compared with the control strain DW9i△leuA (1.47 g/L and 1.79 g/L), the L-valine titers of combinatorial strain DW9i△leuA/pHYi-alsD-bcd were increased by 1.27-fold and 2.89-fold, respectively, in flask and bioreactor. Collectively, this work provides a feasible approach for multiplex metabolic engineering and functional genome studies of B. licheniformis.

Engineering Corynebacterium glutamicum for the de novo biosynthesis of tailored poly-γ-glutamic acid

γ-Polyglutamic acid (γ-PGA) is a biodegradable polymer naturally produced by Bacillus spp. that has wide applications. Fermentation of γ-PGA using Bacillus species often requires the supplementation of L-glutamic acid, which greatly increases the overall cost. Here, we report a metabolically engineered Corynebacterium glutamicum capable of producing γ-PGA from glucose. The genes encoding γ-PGA synthase complex from B. subtilis (pgsB, C, and A) or B. licheniformis (capB, C, and A) were expressed under inducible promoter P_tac in a L-glutamic acid producer C. glutamicum ATCC 13032, which led to low levels of γ-PGA production. Subsequently, C. glutamicum F343 with a strong L-glutamic acid production capability was tested. C. glutamicum F343 carrying capBCA produced γ-PGA up to 11.4 g/L, showing a higher titer compared with C. glutamicum F343 expressing pgsBCA. By introducing B. subtilis glutamate racemase gene racE under P_tac promoter mutants with different expression strength, the percentage of L-glutamic acid units in γ-PGA could be adjusted from 97.1% to 36.9%, and stayed constant during the fermentation process, while the γ-PGA titer reached 21.3 g/L under optimal initial glucose concentrations. The molecular weight (M_w) of γ-PGA in the engineered strains ranged from 2000 to 4000 kDa. This work provides a foundation for the development of sustainable and cost-effective de novo production of γ-PGA from glucose with customized ratios of L-glutamic acid in C. glutamicum.

Improving the utilization rate of soybean meal for efficient production of bacitracin and heterologous proteins in the aprA-deficient strain of Bacillus licheniformis

Soybean meal is commonly applied as the raw material in the bio-fermentation industry, and bacitracin is a widely used feed additive in the feed industry. In this study, we investigated the influence of subtilisin enhancement on soybean meal utilization and bacitracin production in Bacillus licheniformis DW2, an industrial strain for bacitracin production. Firstly, blocking sRNA aprA expression benefited bacitracin synthesis, and the bacitracin yield produced by aprA-deficient strain DW2△PaprA reached 931.43 U/mL, 18.92% higher than that of DW2 (783.25 U/mL). The bacitracin yield was reduced by 14.27% in the aprA overexpression strain. Furthermore, our results showed that deficiency of aprA led to a 6.54-fold increase of the aprE transcriptional level and a 1.84-fold increase of subtilisin activity, respectively, which led to the increases of soybean meal utilization rate (28.86%) and precursor amino acid supplies for bacitracin synthesis. Additionally, strengthening the utilization rate of soybean meal also benefited heterologous protein production, and the α-amylase and nattokinase activities were respectively enhanced by 59.81% and 50.53% in aprA-deficient strains. Collectively, this research demonstrated that strengthening subtilisin production could improve the utilization rate of soybean meal and thereby enhance bacitracin and target protein production; also, this strategy would be useful for the improvement of protein/peptide production using soybean meal as the main nitrogen source in the fermentation process.